The DOI matches its Crossref record; 183 of the 183 references it cites were found in a registry or an index.
3D and 4D Printing of Polymers for Tissue Engineering Applications
Open accessAbstract
Three-dimensional (3D) and Four-dimensional (4D) printing emerged as the next generation of fabrication techniques, spanning across various research areas, such as engineering, chemistry, biology, computer science, and materials science. Three-dimensional printing enables the fabrication of complex forms with high precision, through a layer-by-layer addition of different materials. Use of intelligent materials which change shape or color, produce an electrical current, become bioactive, or perform an intended function in response to an external stimulus, paves the way for the production of dynamic 3D structures, which is now called 4D printing. 3D and 4D printing techniques have great potential in the production of scaffolds to be applied in tissue engineering, especially in constructing patient specific scaffolds. Furthermore, physical and chemical guidance cues can be printed with these methods to improve the extent and rate of targeted tissue regeneration. This review presents a comprehensive survey of 3D and 4D printing methods, and the advantage of their use in tissue regeneration over other scaffold production approaches.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
1 retracted
Du, X. (2018) · IOP Conference Series Materials Science and Engineering · doi:10.1088/1757-899x/301/1/012023 · Cited by 26
Retracted3D bioprinting of tissues and organs
Murphy, S. V., & Atala, A. (2014) · Nature Biotechnology · doi:10.1038/nbt.2958 · Cited by 7,034
Electrospinning of Nanofibers: Reinventing the Wheel?
Li, D., & Xia, Y. (2004) · Advanced Materials · doi:10.1002/adma.200400719 · Cited by 5,521
Autonomic healing of polymer composites
White, S. R., Sottos, N. R., Geubelle, P. H., Moore, J. S., Kessler, M. R., Sriram, S. R., Brown, E. N., & Viswanathan, S. (2001) · Nature · doi:10.1038/35057232 · Cited by 4,575
3D printing of polymer matrix composites: A review and prospective
Wang, X., Jiang, M., Zhou, Z., Gou, J., & Hui, D. (2017) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2016.11.034 · Cited by 3,325
Sydney Gladman, A., Matsumoto, E. A., Nuzzo, R. G., Mahadevan, L., & Lewis, J. A. (2016) · Nature Materials · doi:10.1038/nmat4544 · Cited by 3,027
A review on stereolithography and its applications in biomedical engineering
Melchels, F. P. W., Feijen, J., & Grijpma, D. W. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.04.050 · Cited by 2,457
PEEK biomaterials in trauma, orthopedic, and spinal implants
Kurtz, S. M., & Devine, J. N. (2007) · Biomaterials · doi:10.1016/j.biomaterials.2007.07.013 · Cited by 2,388
3D bioprinting of vascularized, heterogeneous cell-laden tissue constructs
Kolesky, D. B., Truby, R. L., Gladman, A. S., Busbee, T. A., Homan, K. A., & Lewis, J. A. (2014) · Advanced Materials · doi:10.1002/adma.201305506 · Cited by 2,102
Force-induced activation of covalent bonds in mechanoresponsive polymeric materials
Davis, D. A., Hamilton, A., Yang, J., Cremar, L. D., Van Gough, D., Potisek, S. L., Ong, M. T., Braun, P. V., Martínez, T. J., White, S. R., et al. (2009) · Nature · doi:10.1038/nature07970 · Cited by 1,754
3D bioprinting for engineering complex tissues
Mandrycky, C., Wang, Z., Kim, K., & Kim, D.-H. (2016) · Biotechnology Advances · doi:10.1016/j.biotechadv.2015.12.011 · Cited by 1,754
Recent advances in 3D printing of biomaterials
Chia, H. N., & Wu, B. M. (2015) · Journal of Biological Engineering · doi:10.1186/s13036-015-0001-4 · Cited by 1,734
Current advances and future perspectives in extrusion-based bioprinting
Ozbolat, I. T., & Hospodiuk, M. (2016) · Biomaterials · doi:10.1016/j.biomaterials.2015.10.076 · Cited by 1,572
Markstedt, K., Mantas, A., Tournier, I., Martínez Ávila, H., Hägg, D., & Gatenholm, P. (2015) · Biomacromolecules · doi:10.1021/acs.biomac.5b00188 · Cited by 1,528
Hutmacher, D. W., Schantz, T., Zein, I., Ng, K. W., Teoh, S. H., & Tan, K. C. (2001) · Journal of Biomedical Materials Research · doi:10.1002/1097-4636(200105)55:2<203::aid-jbm1007>3.0.co;2-7 · Cited by 1,409
Scaffold-free vascular tissue engineering using bioprinting
Norotte, C., Marga, F. S., Niklason, L. E., & Forgacs, G. (2009) · Biomaterials · doi:10.1016/j.biomaterials.2009.06.034 · Cited by 1,339
A review of trends and limitations in hydrogel-rapid prototyping for tissue engineering
Billiet, T., Vandenhaute, M., Schelfhout, J., Van Vlierberghe, S., & Dubruel, P. (2012) · Biomaterials · doi:10.1016/j.biomaterials.2012.04.050 · Cited by 1,284
Kocak, G., Tuncer, C., & Bütün, V. (2017) · Polymer Chemistry · doi:10.1039/c6py01872f · Cited by 1,189
4D Printing: Multi‐Material Shape Change
Tibbits, S. (2014) · Architectural Design · doi:10.1002/ad.1710 · Cited by 1,188
Stimulus-responsive shape memory materials: a review
Sun, L., Huang, W. M., Ding, Z., Zhao, Y., Wang, C. C., Purnawali, H., & Tang, C. (2012) · Materials & Design · doi:10.1016/j.matdes.2011.04.065 · Cited by 1,105
3D Printing of Scaffolds for Tissue Regeneration Applications
Do, A., Khorsand, B., Geary, S. M., & Salem, A. K. (2015) · Advanced Healthcare Materials · doi:10.1002/adhm.201500168 · Cited by 949
3D printing of smart materials: A review on recent progresses in 4D printing
Khoo, Z. X., Teoh, J. E. M., Liu, Y., Chua, C. K., Yang, S., An, J., Leong, K. F., & Yeong, W. Y. (2015) · Virtual and Physical Prototyping · doi:10.1080/17452759.2015.1097054 · Cited by 912
3D Printing of Shape Memory Polymers for Flexible Electronic Devices
Zarek, M., Layani, M., Cooperstein, I., Sachyani, E., Cohn, D., & Magdassi, S. (2016) · Advanced Materials · doi:10.1002/adma.201503132 · Cited by 903
Multimaterial magnetically assisted 3D printing of composite materials
Kokkinis, D., Schaffner, M., & Studart, A. R. (2015) · Nature Communications · doi:10.1038/ncomms9643 · Cited by 848
A review of rapid prototyping techniques for tissue engineering purposes
Peltola, S. M., Melchels, F. P. W., Grijpma, D. W., & Kellomäki, M. (2008) · Annals of Medicine · doi:10.1080/07853890701881788 · Cited by 751
Sun, D., Chang, C., Li, S., & Lin, L. (2006) · Nano Letters · doi:10.1021/nl0602701 · Cited by 748
Designing Biomaterials for 3D Printing
Guvendiren, M., Molde, J., Soares, R. M. D., & Kohn, J. (2016) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.6b00121 · Cited by 732
4D Bioprinting for Biomedical Applications
Gao, B., Yang, Q., Zhao, X., Jin, G., Ma, Y., & Xu, F. (2016) · Trends in Biotechnology · doi:10.1016/j.tibtech.2016.03.004 · Cited by 711
Mechanical properties of PNIPAM based hydrogels: A review
Haq, M. A., Su, Y., & Wang, D. (2017) · Materials Science and Engineering: C · doi:10.1016/j.msec.2016.09.081 · Cited by 695
Jang, J., Park, H.-J., Kim, S.-W., Kim, H., Park, J. Y., Na, S. J., Kim, H. J., Park, M. N., Choi, S. H., Park, S. H., et al. (2017) · Biomaterials · doi:10.1016/j.biomaterials.2016.10.026 · Cited by 673
Automatic method for fabricating a three-dimensional plastic model with photo-hardening polymer
Kodama, H. (1981) · Review of Scientific Instruments · doi:10.1063/1.1136492 · Cited by 668
Self-Folding Thermo-Magnetically Responsive Soft Microgrippers
Breger, J. C., Yoon, C., Xiao, R., Kwag, H. R., Wang, M. O., Fisher, J. P., Nguyen, T. D., & Gracias, D. H. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/am508621s · Cited by 655
Wang, Z., Abdulla, R., Parker, B., Samanipour, R., Ghosh, S., & Kim, K. (2015) · Biofabrication · doi:10.1088/1758-5090/7/4/045009 · Cited by 633
Michael, S., Sorg, H., Peck, C.-T., Koch, L., Deiwick, A., Chichkov, B., Vogt, P. M., & Reimers, K. (2013) · PLoS ONE · doi:10.1371/journal.pone.0057741 · Cited by 623
Skin tissue generation by laser cell printing
Koch, L., Deiwick, A., Schlie, S., Michael, S., Gruene, M., Coger, V., Zychlinski, D., Schambach, A., Reimers, K., Vogt, P. M., et al. (2012) · Biotechnology and Bioengineering · doi:10.1002/bit.24455 · Cited by 609
Thermal Inkjet Printing in Tissue Engineering and Regenerative Medicine
Cui, X., Boland, T., D.D'Lima, D., & K. Lotz, M. (2012) · Recent Patents on Drug Delivery & Formulation · doi:10.2174/187221112800672949 · Cited by 581
Active printed materials for complex self-evolving deformations
Raviv, D., Zhao, W., McKnelly, C., Papadopoulou, A., Kadambi, A., Shi, B., Hirsch, S., Dikovsky, D., Zyracki, M., Olguin, C., et al. (2014) · Scientific Reports · doi:10.1038/srep07422 · Cited by 568
Mechanical properties and shape memory effect of 3D-printed PLA-based porous scaffolds
Senatov, F. S., Niaza, K. V., Zadorozhnyy, M. Y., Maksimkin, A. V., Kaloshkin, S. D., & Estrin, Y. Z. (2016) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2015.11.036 · Cited by 547
Ercole, F., Davis, T. P., & Evans, R. A. (2010) · Polym. Chem. · doi:10.1039/b9py00300b · Cited by 535
Yang, X., Lu, Z., Wu, H., Li, W., Zheng, L., & Zhao, J. (2018) · Materials Science and Engineering: C · doi:10.1016/j.msec.2017.09.002 · Cited by 533
Viability and electrophysiology of neural cell structures generated by the inkjet printing method
Xu, T., Gregory, C. A., Molnar, P., Cui, X., Jalota, S., Bhaduri, S. B., & Boland, T. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2006.01.048 · Cited by 520
Kim, B. S., Kwon, Y. W., Kong, J.-S., Park, G. T., Gao, G., Han, W., Kim, M.-B., Lee, H., Kim, J. H., & Cho, D.-W. (2018) · Biomaterials · doi:10.1016/j.biomaterials.2018.03.040 · Cited by 502
Morrison, R. J., Hollister, S. J., Niedner, M. F., Mahani, M. G., Park, A. H., Mehta, D. K., Ohye, R. G., & Green, G. E. (2015) · Science Translational Medicine · doi:10.1126/scitranslmed.3010825 · Cited by 498
Casavola, C., Cazzato, A., Moramarco, V., & Pappalettere, C. (2015) · Materials & Design · doi:10.1016/j.matdes.2015.11.009 · Cited by 493
Branquinho, L. C., Carrião, M. S., Costa, A. S., Zufelato, N., Sousa, M. H., Miotto, R., Ivkov, R., & Bakuzis, A. F. (2014) · Scientific Reports · doi:10.1038/srep03637 · Cited by 491
4D printing smart biomedical scaffolds with novel soybean oil epoxidized acrylate
Miao, S., Zhu, W., Castro, N. J., Nowicki, M., Zhou, X., Cui, H., Fisher, J. P., & Zhang, L. G. (2016) · Scientific Reports · doi:10.1038/srep27226 · Cited by 477
Mondschein, R. J., Kanitkar, A., Williams, C. B., Verbridge, S. S., & Long, T. E. (2017) · Biomaterials · doi:10.1016/j.biomaterials.2017.06.005 · Cited by 475
Biomaterials for Integration with 3-D Bioprinting
Skardal, A., & Atala, A. (2015) · Annals of Biomedical Engineering · doi:10.1007/s10439-014-1207-1 · Cited by 474
Selective laser sintering in biomedical engineering
Mazzoli, A. (2013) · Medical & Biological Engineering & Computing · doi:10.1007/s11517-012-1001-x · Cited by 469
Stimuli-Responsive Polymers and Their Applications in Nanomedicine
Cabane, E., Zhang, X., Langowska, K., Palivan, C. G., & Meier, W. (2012) · Biointerphases · doi:10.1007/s13758-011-0009-3 · Cited by 468
3D bioprinting of functional human skin: production and in vivo analysis
Cubo, N., Garcia, M., del Cañizo, J. F., Velasco, D., & Jorcano, J. L. (2016) · Biofabrication · doi:10.1088/1758-5090/9/1/015006 · Cited by 454
Keriquel, V., Oliveira, H., Rémy, M., Ziane, S., Delmond, S., Rousseau, B., Rey, S., Catros, S., Amédée, J., Guillemot, F., et al. (2017) · Scientific Reports · doi:10.1038/s41598-017-01914-x · Cited by 447
3D printing of layered brain-like structures using peptide modified gellan gum substrates
Lozano, R., Stevens, L., Thompson, B. C., Gilmore, K. J., Gorkin, R., Stewart, E. M., in het Panhuis, M., Romero-Ortega, M., & Wallace, G. G. (2015) · Biomaterials · doi:10.1016/j.biomaterials.2015.07.022 · Cited by 445
Hsieh, F.-Y., Lin, H.-H., & Hsu, S.-H. (2015) · Biomaterials · doi:10.1016/j.biomaterials.2015.08.028 · Cited by 420
4D Printing of Shape Memory‐Based Personalized Endoluminal Medical Devices
Zarek, M., Mansour, N., Shapira, S., & Cohn, D. (2017) · Macromolecular Rapid Communications · doi:10.1002/marc.201600628 · Cited by 419
3D bioprinting of a corneal stroma equivalent
Isaacson, A., Swioklo, S., & Connon, C. J. (2018) · Experimental Eye Research · doi:10.1016/j.exer.2018.05.010 · Cited by 419
Bio-printing of collagen and VEGF-releasing fibrin gel scaffolds for neural stem cell culture
Lee, Y.-B., Polio, S., Lee, W., Dai, G., Menon, L., Carroll, R. S., & Yoo, S.-S. (2010) · Experimental Neurology · doi:10.1016/j.expneurol.2010.02.014 · Cited by 388
Li, Y.-C., Zhang, Y. S., Akpek, A., Shin, S. R., & Khademhosseini, A. (2016) · Biofabrication · doi:10.1088/1758-5090/9/1/012001 · Cited by 385
Additive manufacturing techniques for the production of tissue engineering constructs
Mota, C., Puppi, D., Chiellini, F., & Chiellini, E. (2015) · Journal of Tissue Engineering and Regenerative Medicine · doi:10.1002/term.1635 · Cited by 382
Sorkio, A., Koch, L., Koivusalo, L., Deiwick, A., Miettinen, S., Chichkov, B., & Skottman, H. (2018) · Biomaterials · doi:10.1016/j.biomaterials.2018.04.034 · Cited by 381
Functional 3D Neural Mini‐Tissues from Printed Gel‐Based Bioink and Human Neural Stem Cells
Gu, Q., Tomaskovic‐Crook, E., Lozano, R., Chen, Y., Kapsa, R. M., Zhou, Q., Wallace, G. G., & Crook, J. M. (2016) · Advanced Healthcare Materials · doi:10.1002/adhm.201600095 · Cited by 376
4D Printing Technology: A Review
Choi, J., Kwon, O.-C., Jo, W., Lee, H. J., & Moon, M.-W. (2015) · 3D Printing and Additive Manufacturing · doi:10.1089/3dp.2015.0039 · Cited by 365
Ornamenting 3D printed scaffolds with cell-laid extracellular matrix for bone tissue regeneration
Pati, F., Song, T.-H., Rijal, G., Jang, J., Kim, S. W., & Cho, D.-W. (2015) · Biomaterials · doi:10.1016/j.biomaterials.2014.10.012 · Cited by 361
Human Skin 3D Bioprinting Using Scaffold‐Free Approach
Pourchet, L. J., Thepot, A., Albouy, M., Courtial, E. J., Boher, A., Blum, L. J., & Marquette, C. A. (2017) · Advanced Healthcare Materials · doi:10.1002/adhm.201601101 · Cited by 352
Optogenetic skeletal muscle-powered adaptive biological machines
Raman, R., Cvetkovic, C., Uzel, S. G. M., Platt, R. J., Sengupta, P., Kamm, R. D., & Bashir, R. (2016) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1516139113 · Cited by 344
Gao, G., Schilling, A. F., Hubbell, K., Yonezawa, T., Truong, D., Hong, Y., Dai, G., & Cui, X. (2015) · Biotechnology Letters · doi:10.1007/s10529-015-1921-2 · Cited by 341
Liu, H., Peng, H., Wu, Y., Zhang, C., Cai, Y., Xu, G., Li, Q., Chen, X., Ji, J., Zhang, Y., et al. (2013) · Biomaterials · doi:10.1016/j.biomaterials.2013.02.048 · Cited by 339
An overview of additive manufacturing (3D printing) for microfabrication
Bhushan, B., & Caspers, M. (2017) · Microsystem Technologies · doi:10.1007/s00542-017-3342-8 · Cited by 338
Wang, W., Caetano, G., Ambler, W., Blaker, J., Frade, M., Mandal, P., Diver, C., & Bártolo, P. (2016) · Materials · doi:10.3390/ma9120992 · Cited by 330
Bendtsen, S. T., Quinnell, S. P., & Wei, M. (2017) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.36036 · Cited by 329
Poly(dopamine) coating of 3D printed poly(lactic acid) scaffolds for bone tissue engineering
Kao, C.-T., Lin, C.-C., Chen, Y.-W., Yeh, C.-H., Fang, H.-Y., & Shie, M.-Y. (2015) · Materials Science and Engineering: C · doi:10.1016/j.msec.2015.06.028 · Cited by 327
Two-Way 4D Printing: A Review on the Reversibility of 3D-Printed Shape Memory Materials
Lee, A. Y., An, J., & Chua, C. K. (2017) · Engineering · doi:10.1016/j.eng.2017.05.014 · Cited by 326
3D-Printed ABS and PLA Scaffolds for Cartilage and Nucleus Pulposus Tissue Regeneration
Rosenzweig, D., Carelli, E., Steffen, T., Jarzem, P., & Haglund, L. (2015) · International Journal of Molecular Sciences · doi:10.3390/ijms160715118 · Cited by 326
Bone tissue engineering scaffolding: computer-aided scaffolding techniques
Thavornyutikarn, B., Chantarapanich, N., Sitthiseripratip, K., Thouas, G. A., & Chen, Q. (2014) · Progress in Biomaterials · doi:10.1007/s40204-014-0026-7 · Cited by 325
Yilgor, P., Tuzlakoglu, K., Reis, R. L., Hasirci, N., & Hasirci, V. (2009) · Biomaterials · doi:10.1016/j.biomaterials.2009.03.024 · Cited by 323
Self-citationStereolithography in tissue engineering
Skoog, S. A., Goering, P. L., & Narayan, R. J. (2014) · Journal of Materials Science: Materials in Medicine · doi:10.1007/s10856-013-5107-y · Cited by 321
Zhang, J., Zhao, S., Zhu, M., Zhu, Y., Zhang, Y., Liu, Z., & Zhang, C. (2014) · J. Mater. Chem. B · doi:10.1039/c4tb01063a · Cited by 317
State-of-the-Art Review of 3D Bioprinting for Cardiovascular Tissue Engineering
Duan, B. (2017) · Annals of Biomedical Engineering · doi:10.1007/s10439-016-1607-5 · Cited by 314
Selective Laser Sintering of PEEK
Schmidt, M., Pohle, D., & Rechtenwald, T. (2007) · CIRP Annals · doi:10.1016/j.cirp.2007.05.097 · Cited by 305
Evaluating 3D‐Printed Biomaterials as Scaffolds for Vascularized Bone Tissue Engineering
Wang, M. O., Vorwald, C. E., Dreher, M. L., Mott, E. J., Cheng, M., Cinar, A., Mehdizadeh, H., Somo, S., Dean, D., Brey, E. M., et al. (2015) · Advanced Materials · doi:10.1002/adma.201403943 · Cited by 301
Design and Fabrication of Tubular Scaffolds via Direct Writing in a Melt Electrospinning Mode
Brown, T. D., Slotosch, A., Thibaudeau, L., Taubenberger, A., Loessner, D., Vaquette, C., Dalton, P. D., & Hutmacher, D. W. (2012) · Biointerphases · doi:10.1007/s13758-011-0013-7 · Cited by 299
Itoh, M., Nakayama, K., Noguchi, R., Kamohara, K., Furukawa, K., Uchihashi, K., Toda, S., Oyama, J.-I., Node, K., & Morita, S. (2015) · PLOS ONE · doi:10.1371/journal.pone.0136681 · Cited by 299
Powder-based 3D printing for bone tissue engineering
Brunello, G., Sivolella, S., Meneghello, R., Ferroni, L., Gardin, C., Piattelli, A., Zavan, B., & Bressan, E. (2016) · Biotechnology Advances · doi:10.1016/j.biotechadv.2016.03.009 · Cited by 296
Polyelectrolyte gelatin-chitosan hydrogel optimized for 3D bioprinting in skin tissue engineering
Ng, W. L., Yeong, W. Y., & Naing, M. W. (2024) · International Journal of Bioprinting · doi:10.18063/ijb.2016.01.009 · Cited by 293
Park, S. A., Lee, S. H., & Kim, W. D. (2011) · Bioprocess and Biosystems Engineering · doi:10.1007/s00449-010-0499-2 · Cited by 284
Martínez Ávila, H., Schwarz, S., Rotter, N., & Gatenholm, P. (2016) · Bioprinting · doi:10.1016/j.bprint.2016.08.003 · Cited by 282
Lee, J. W., Kang, K. S., Lee, S. H., Kim, J.-Y., Lee, B.-K., & Cho, D.-W. (2011) · Biomaterials · doi:10.1016/j.biomaterials.2010.09.035 · Cited by 274
3D bioprinting of skin: a state-of-the-art review on modelling, materials, and processes
Vijayavenkataraman, S., Lu, W. F., & Fuh, J. Y. H. (2016) · Biofabrication · doi:10.1088/1758-5090/8/3/032001 · Cited by 273
Zhang, K., Fu, Q., Yoo, J., Chen, X., Chandra, P., Mo, X., Song, L., Atala, A., & Zhao, W. (2017) · Acta Biomaterialia · doi:10.1016/j.actbio.2016.12.008 · Cited by 268
Breakthrough in the printing tactics for stimuli-responsive materials: 4D printing
Rastogi, P., & Kandasubramanian, B. (2019) · Chemical Engineering Journal · doi:10.1016/j.cej.2019.02.085 · Cited by 267
Chua, C. K., Leong, K. F., Tan, K. H., Wiria, F. E., & Cheah, C. M. (2004) · Journal of Materials Science: Materials in Medicine · doi:10.1023/b:jmsm.0000046393.81449.a5 · Cited by 259
Three‐Dimensional Magnetic Assembly of Microscale Hydrogels
Xu, F., Wu, C. M., Rengarajan, V., Finley, T. D., Keles, H. O., Sung, Y., Li, B., Gurkan, U. A., & Demirci, U. (2011) · Advanced Materials · doi:10.1002/adma.201101962 · Cited by 251
Kalista, S. J., & Ward, T. C. (2007) · Journal of The Royal Society Interface · doi:10.1098/rsif.2006.0169 · Cited by 251
Hung, K.-C., Tseng, C.-S., Dai, L.-G., & Hsu, S.-H. (2016) · Biomaterials · doi:10.1016/j.biomaterials.2016.01.019 · Cited by 251
Peters, C., Hoop, M., Pané, S., Nelson, B. J., & Hierold, C. (2016) · Advanced Materials · doi:10.1002/adma.201503112 · Cited by 243
3D bioprinting and the current applications in tissue engineering
Huang, Y., Zhang, X., Gao, G., Yonezawa, T., & Cui, X. (2017) · Biotechnology Journal · doi:10.1002/biot.201600734 · Cited by 240
Near-Field Electrospinning: Progress and Applications
He, X.-X., Zheng, J., Yu, G.-F., You, M.-H., Yu, M., Ning, X., & Long, Y.-Z. (2017) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.6b12783 · Cited by 238
Responsive cellulose-hydrogel composite ink for 4D printing
Mulakkal, M. C., Trask, R. S., Ting, V. P., & Seddon, A. M. (2018) · Materials & Design · doi:10.1016/j.matdes.2018.09.009 · Cited by 238
Xu, N., Ye, X., Wei, D., Zhong, J., Chen, Y., Xu, G., & He, D. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am502716t · Cited by 231
Self-Healing of Poly(Ethylene-co-Methacrylic Acid) Copolymers Following Projectile Puncture
Kalista, S. J., Ward, T. C., & Oyetunji, Z. (2007) · Mechanics of Advanced Materials and Structures · doi:10.1080/15376490701298819 · Cited by 229
Photoresponsive Hydrogel System Using Molecular Recognition of α-Cyclodextrin
Tomatsu, I., Hashidzume, A., & Harada, A. (2005) · Macromolecules · doi:10.1021/ma050670v · Cited by 225
From 3D to 4D printing: Approaches and typical applications
Zhou, Y., Huang, W. M., Kang, S. F., Wu, X. L., Lu, H. B., Fu, J., & Cui, H. (2015) · Journal of Mechanical Science and Technology · doi:10.1007/s12206-015-0925-0 · Cited by 224
Poldervaart, M. T., Gremmels, H., van Deventer, K., Fledderus, J. O., Öner, F. C., Verhaar, M. C., Dhert, W. J. A., & Alblas, J. (2014) · Journal of Controlled Release · doi:10.1016/j.jconrel.2014.04.007 · Cited by 224
Lee, S. J., Lee, D., Yoon, T. R., Kim, H. K., Jo, H. H., Park, J. S., Lee, J. H., Kim, W. D., Kwon, I. K., & Park, S. A. (2016) · Acta Biomaterialia · doi:10.1016/j.actbio.2016.02.006 · Cited by 221
4D printing applications in medical field: A brief review
Javaid, M., & Haleem, A. (2019) · Clinical Epidemiology and Global Health · doi:10.1016/j.cegh.2018.09.007 · Cited by 212
Development of a 3D printer using scanning projection stereolithography
Lee, M. P., Cooper, G. J. T., Hinkley, T., Gibson, G. M., Padgett, M. J., & Cronin, L. (2015) · Scientific Reports · doi:10.1038/srep09875 · Cited by 209
Adult rat retinal ganglion cells and glia can be printed by piezoelectric inkjet printing
Lorber, B., Hsiao, W.-K., Hutchings, I. M., & Martin, K. R. (2013) · Biofabrication · doi:10.1088/1758-5082/6/1/015001 · Cited by 207
Extracellular matrix scaffolding in angiogenesis and capillary homeostasis
Marchand, M., Monnot, C., Muller, L., & Germain, S. (2019) · Seminars in Cell & Developmental Biology · doi:10.1016/j.semcdb.2018.08.007 · Cited by 205
Biofabrication and testing of a fully cellular nerve graft
Owens, C. M., Marga, F., Forgacs, G., & Heesch, C. M. (2013) · Biofabrication · doi:10.1088/1758-5082/5/4/045007 · Cited by 204
Evaluation of Photocrosslinked Lutrol Hydrogel for Tissue Printing Applications
Fedorovich, N. E., Swennen, I., Girones, J., Moroni, L., van Blitterswijk, C. A., Schacht, E., Alblas, J., & Dhert, W. J. A. (2009) · Biomacromolecules · doi:10.1021/bm801463q · Cited by 202
Bioprinting for Neural Tissue Engineering
Knowlton, S., Anand, S., Shah, T., & Tasoglu, S. (2018) · Trends in Neurosciences · doi:10.1016/j.tins.2017.11.001 · Cited by 201
4D Printing: dawn of an emerging technology cycle
Pei, E. (2014) · Assembly Automation · doi:10.1108/aa-07-2014-062 · Cited by 199
Huang, Y.-C., Simmons, C., Kaigler, D., Rice, K. G., & Mooney, D. J. (2005) · Gene Therapy · doi:10.1038/sj.gt.3302439 · Cited by 199
Miao, S., Zhu, W., Castro, N. J., Leng, J., & Zhang, L. G. (2016) · Tissue Engineering Part C: Methods · doi:10.1089/ten.tec.2015.0542 · Cited by 187
Selective laser sintering of hydroxyapatite/poly-ε-caprolactone scaffolds
Eosoly, S., Brabazon, D., Lohfeld, S., & Looney, L. (2010) · Acta Biomaterialia · doi:10.1016/j.actbio.2009.07.018 · Cited by 186
Cui, H., Zhu, W., Nowicki, M., Zhou, X., Khademhosseini, A., & Zhang, L. G. (2016) · Advanced Healthcare Materials · doi:10.1002/adhm.201600505 · Cited by 185
Bioprinting of Thermoresponsive Hydrogels for Next Generation Tissue Engineering: A Review
Suntornnond, R., An, J., & Chua, C. K. (2017) · Macromolecular Materials and Engineering · doi:10.1002/mame.201600266 · Cited by 180
Dual-Responsive Hydrogels for Direct-Write 3D Printing
Zhang, M., Vora, A., Han, W., Wojtecki, R. J., Maune, H., Le, A. B. A., Thompson, L. E., McClelland, G. M., Ribet, F., Engler, A. C., et al. (2015) · Macromolecules · doi:10.1021/acs.macromol.5b01550 · Cited by 178
Hendrikson, W. J., Rouwkema, J., Clementi, F., van Blitterswijk, C. A., Farè, S., & Moroni, L. (2017) · Biofabrication · doi:10.1088/1758-5090/aa8114 · Cited by 177
Current progress in 3D printing for cardiovascular tissue engineering
Mosadegh, B., Xiong, G., Dunham, S., & Min, J. K. (2015) · Biomedical Materials · doi:10.1088/1748-6041/10/3/034002 · Cited by 174
Duarte Campos, D. F., Blaeser, A., Buellesbach, K., Sen, K. S., Xun, W., Tillmann, W., & Fischer, H. (2016) · Advanced Healthcare Materials · doi:10.1002/adhm.201501033 · Cited by 173
Low-cycle fatigue behavior of 3d-printed PLA-based porous scaffolds
Senatov, F. S., Niaza, K. V., Stepashkin, A. A., & Kaloshkin, S. D. (2016) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2016.04.067 · Cited by 170
3D‐Printed Biodegradable Polymeric Vascular Grafts
Melchiorri, A. J., Hibino, N., Best, C. A., Yi, T., Lee, Y. U., Kraynak, C. A., Kimerer, L. K., Krieger, A., Kim, P., Breuer, C. K., et al. (2016) · Advanced Healthcare Materials · doi:10.1002/adhm.201500725 · Cited by 165
Three-dimensional bioprinting of rat embryonic neural cells
Lee, W., Pinckney, J., Lee, V., Lee, J.-H., Fischer, K., Polio, S., Park, J.-K., & Yoo, S.-S. (2009) · NeuroReport · doi:10.1097/wnr.0b013e32832b8be4 · Cited by 162
Digital micromirror device projection printing system for meniscus tissue engineering
Grogan, S. P., Chung, P. H., Soman, P., Chen, P., Lotz, M. K., Chen, S., & D’Lima, D. D. (2013) · Acta Biomaterialia · doi:10.1016/j.actbio.2013.03.020 · Cited by 162
Bone matrix production in hydroxyapatite-modified hydrogels suitable for bone bioprinting
Wenz, A., Borchers, K., Tovar, G. E. M., & Kluger, P. J. (2017) · Biofabrication · doi:10.1088/1758-5090/aa91ec · Cited by 162
3D bioprinting of biomimetic aortic vascular constructs with self‐supporting cells
Kucukgul, C., Ozler, S. B., Inci, I., Karakas, E., Irmak, S., Gozuacik, D., Taralp, A., & Koc, B. (2015) · Biotechnology and Bioengineering · doi:10.1002/bit.25493 · Cited by 161
Lee, S.-J., Nowicki, M., Harris, B., & Zhang, L. G. (2017) · Tissue Engineering Part A · doi:10.1089/ten.tea.2016.0353 · Cited by 161
Neuss, S., Blomenkamp, I., Stainforth, R., Boltersdorf, D., Jansen, M., Butz, N., Perez-Bouza, A., & Knüchel, R. (2009) · Biomaterials · doi:10.1016/j.biomaterials.2008.12.027 · Cited by 151
Sumaru, K., Ohi, K., Takagi, T., Kanamori, T., & Shinbo, T. (2006) · Langmuir · doi:10.1021/la052899+ · Cited by 150
Murphy, C. A., Kolan, K. C. R., Li, W., Semon, J. A., Day, D. E., & Leu, M. C. (2017) · International Journal of Bioprinting · doi:10.18063/ijb.2017.01.005 · Cited by 150
A perspective on 4D bioprinting
An, J., Chua, C. K., & Mironov, V. (2015) · International Journal of Bioprinting · doi:10.18063/ijb.2016.01.003 · Cited by 148
Intelligent materials: a review of applications in 4D printing
Li, X., Shang, J., & Wang, Z. (2017) · Assembly Automation · doi:10.1108/aa-11-2015-093 · Cited by 148
Photoresponsive Liquid Crystalline Epoxy Networks with Shape Memory Behavior and Dynamic Ester Bonds
Li, Y., Rios, O. R., Keum, J. K., Chen, J., & Kessler, M. R. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b04374 · Cited by 147
Introduction to smart polymers and their applications
Aguilar, M. R., & Román, J. S. (2014) · Elsevier eBooks · doi:10.1533/9780857097026.1 · Cited by 144
Shape memory effect in 3D-printed scaffolds for self-fitting implants
Senatov, F. S., Zadorozhnyy, M. Y., Niaza, K. V., Medvedev, V. V., Kaloshkin, S. D., Anisimova, N. Y., Kiselevskiy, M., & Yang, K.-C. (2017) · European Polymer Journal · doi:10.1016/j.eurpolymj.2017.06.011 · Cited by 144
Humidity-responsive actuation of programmable hydrogel microstructures based on 3D printing
Lv, C., Sun, X., Xia, H., Yu, Y., Wang, G., Cao, X., Li, S., Wang, Y., Chen, Q., Yu, Y., et al. (2017) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2017.12.053 · Cited by 139
Miao, S., Cui, H., Nowicki, M. A., Lee, S., de Almeida, J. A. A., Zhou, X., Zhu, W., Yao, X., Masood, F., Plesniak, M. W., et al. (2018) · Biofabrication · doi:10.1088/1758-5090/aabe0b · Cited by 139
Temperature and pH responsive 3D printed scaffolds
Dutta, S., & Cohn, D. (2017) · Journal of Materials Chemistry B · doi:10.1039/c7tb02368e · Cited by 135
Dispensing pico to nanolitre of a natural hydrogel by laser-assisted bioprinting
Gruene, M., Unger, C., Koch, L., Deiwick, A., & Chichkov, B. N. (2011) · BioMedical Engineering OnLine · doi:10.1186/1475-925x-10-19 · Cited by 132
pH-responsive polymers: properties, synthesis and applications
Reyes‐Ortega, F. (2014) · Elsevier eBooks · doi:10.1533/9780857097026.1.45 · Cited by 131
Chae Jung, Y., Hwa So, H., & Whan Cho, J. (2006) · Journal of Macromolecular Science, Part B · doi:10.1080/00222340600767513 · Cited by 131
Chen, C., Zeng, F., Xiao, X., Wang, Z., Li, X., Tan, R.-W., Liu, W., Zhang, Y., She, Z., & Li, S. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b10072 · Cited by 128
Cunniffe, G. M., Gonzalez‐Fernandez, T., Daly, A. C., Sathy, B. N., Jeon, O., Alsberg, E., & Kelly, D. J. (2017) · Tissue Engineering Part A · doi:10.1089/ten.tea.2016.0498 · Cited by 125
Wiria, F. E., Chua, C. K., Leong, K. F., Quah, Z. Y., Chandrasekaran, M., & Lee, M. W. (2007) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-007-3176-5 · Cited by 123
Shuai, C., Mao, Z., Lu, H., et al. (2013) · Biofabrication · doi:10.1088/1758-5082/5/1/015014 · Cited by 116
Bahçecioğlu, G., Hasırcı, N., Bilgen, B., & Hasırcı, V. (2018) · Biofabrication · doi:10.1088/1758-5090/aaf707 · Cited by 113
Koroleva, A., Gill, A. A., Asencio, Í. O., Haycock, J. W., Schlie, S., Gittard, S. D., Chichkov, B. N., & Claeyssens, F. (2012) · Biofabrication · doi:10.1088/1758-5082/4/2/025005 · Cited by 111
Cell and protein compatible 3D bioprinting of mechanically strong constructs for bone repair
Sawkins, M. J., Mistry, P., Brown, B. N., Shakesheff, K. M., Bonassar, L. J., & Yang, J. (2015) · Biofabrication · doi:10.1088/1758-5090/7/3/035004 · Cited by 110
Zorlutuna, P., Vrana, N. E., & Khademhosseini, A. (2013) · IEEE Reviews in Biomedical Engineering · doi:10.1109/rbme.2012.2233468 · Cited by 110
Porous bioprinted constructs in BMP-2 non-viral gene therapy for bone tissue engineering
Loozen, L. D., Wegman, F., Öner, F. C., Dhert, W. J. A., & Alblas, J. (2013) · Journal of Materials Chemistry B · doi:10.1039/c3tb21093f · Cited by 103
Biomedical applications of magneto-responsive scaffolds
Adedoyin, A. A., & Ekenseair, A. K. (2018) · Nano Research · doi:10.1007/s12274-018-2198-2 · Cited by 101
Büyüksungur, S., Tanır, T. E., Büyüksungur, A., Bektas, E. I., Köse, G. T., Yücel, D., Beyzadeoğlu, T., Cetinkaya, E., Yenigun, C., Tönük, E., et al. (2017) · Biomaterials Science · doi:10.1039/c7bm00514h · Cited by 99
Biomimetic 3D printed scaffolds for meniscus tissue engineering
Szojka, A. R. A., Lalh, K., Andrews, S. H. J., Jomha, N. M., Osswald, M., & Adesida, A. B. (2017) · Bioprinting · doi:10.1016/j.bprint.2017.08.001 · Cited by 99
3D printing scaffold coupled with low level light therapy for neural tissue regeneration
Zhu, W., George, J., Sorger, V. J., & Zhang, L. G. (2017) · Biofabrication · doi:10.1088/1758-5090/aa6999 · Cited by 94
D’Amora, U., Russo, T., Gloria, A., Rivieccio, V., D’Antò, V., Negri, G., Ambrosio, L., & Santis, R. D. (2017) · Bioactive Materials · doi:10.1016/j.bioactmat.2017.04.003 · Cited by 94
Thermal Influence of CNT on the Polyamide 12 Nanocomposite for Selective Laser Sintering
Bai, J., Goodridge, R., Yuan, S., et al. (2015) · Molecules · doi:10.3390/molecules201019041 · Cited by 93
Temperature-responsive polymers: properties, synthesis and applications
Hoogenboom, R. (2014) · Elsevier eBooks · doi:10.1533/9780857097026.1.15 · Cited by 88
Santis, R. D., D’Amora, U., Russo, T., Ronca, A., Gloria, A., & Ambrosio, L. (2015) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-015-5582-4 · Cited by 85
Petrochenko, P. E., Torgersen, J., Gruber, P., Hicks, L. A., Zheng, J., Kumar, G., Narayan, R. J., Goering, P. L., Liska, R., Stampfl, J., et al. (2014) · Advanced Healthcare Materials · doi:10.1002/adhm.201400442 · Cited by 82
Magnetically actuated tissue engineered scaffold: insights into mechanism of physical stimulation
Sapir, Y., Rotenberg, M. Y., Jopp, J., Friedman, G., Polyak, B., & Cohen, S. (2016) · Nanoscale · doi:10.1039/c5nr05500h · Cited by 80
Chen, C., Shyu, V. B., Chen, J., & Lee, M. (2014) · Biofabrication · doi:10.1088/1758-5082/6/1/015004 · Cited by 79
Bahçecioğlu, G., Hasırcı, N., Bilgen, B., & Hasırcı, V. (2018) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2018.09.065 · Cited by 77
Triple-Layer Vascular Grafts Fabricated by Combined E-Jet 3D Printing and Electrospinning
Huang, R., Gao, X., Wang, J., Chen, H., Tong, C., Tan, Y., & Tan, Z. (2018) · Annals of Biomedical Engineering · doi:10.1007/s10439-018-2065-z · Cited by 76
Mechanically active scaffolds from radio‐opaque shape‐memory polymer‐based composites
Cui, J., Kratz, K. L., Heuchel, M., Hiebl, B., & Lendlein, A. (2010) · Polymers for Advanced Technologies · doi:10.1002/pat.1733 · Cited by 71
Cengiz, I. F., Pitikakis, M., Cesario, L., Parascandolo, P., Vosilla, L., Viano, G., Oliveira, J. M., & Reis, R. L. (2016) · Bioprinting · doi:10.1016/j.bprint.2016.05.001 · Cited by 71
Mazzoli, A., Ferretti, C., Gigante, A. P., Salvolini, E., & Mattioli‐Belmonte, M. (2015) · Rapid Prototyping Journal · doi:10.1108/rpj-04-2013-0040 · Cited by 70
Innovative magnetic scaffolds for orthopedic tissue engineering
Panseri, S., Russo, A., Giavaresi, G., Sartori, M., Veronesi, F., Fini, M., Salter, D. M., Ortolani, A., Strazzari, A., Visani, A., et al. (2012) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.34167 · Cited by 70
Actuating Porous Polyimide Films
Zhang, Y., & Ionov, L. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am502492u · Cited by 70
Application of 3D printing technology in bone tissue engineering
Ji, K., Wang, Y., Wei, Q., Zhang, K., Jiang, A., Rao, Y., & Cai, X. (2018) · Bio-Design and Manufacturing · doi:10.1007/s42242-018-0021-2 · Cited by 63
Journey of water in pine cones
Song, K., Yeom, E., Seo, S.-J., Kim, K., Kim, H., Lim, J.-H., & Lee, S. J. (2015) · Scientific Reports · doi:10.1038/srep09963 · Cited by 56
3D and 4D Printing in Biomedical Applications
(2018) · Wiley eBooks · doi:10.1002/9783527813704 · Cited by 54
Photo-responsive polymers: properties, synthesis and applications
Cui, J., & del Campo, A. (2014) · Elsevier eBooks · doi:10.1533/9780857097026.1.93 · Cited by 50
Carlier, A., Skvortsov, G. A., Hafezi, F., Ferraris, E., Patterson, J., Koç, B., & Oosterwyck, H. V. (2016) · Biofabrication · doi:10.1088/1758-5090/8/2/025009 · Cited by 48
Saito, E., Suárez-González, D., Murphy, W. L., & Hollister, S. J. (2014) · Advanced Healthcare Materials · doi:10.1002/adhm.201400424 · Cited by 41
Ravi, P., Shiakolas, P. S., & Welch, T. R. (2017) · Additive manufacturing · doi:10.1016/j.addma.2017.06.002 · Cited by 40
Liao, H.-T., Chang, K.-H., Jiang, Y., Chen, J., & Lee, M. (2011) · Virtual and Physical Prototyping · doi:10.1080/17452759.2011.559742 · Cited by 34
pH-Responsive Nano Carriers for Doxorubicin Delivery
Bagherifam, S., Skjeldal, F. M., Griffiths, G. W., Mælandsmo, G. M., Engebråten, O., Nyström, B., Hasırcı, V., & Hasırcı, N. (2014) · Pharmaceutical Research · doi:10.1007/s11095-014-1530-0 · Cited by 32
Colasante, C., Sanford, Z., Garfein, E. S., & Tepper, O. M. (2016) · Current Surgery Reports · doi:10.1007/s40137-016-0127-4 · Cited by 28
Microfabrication Technology in Tissue Engineering
Cha, C., Piraino, F., & Khademhosseini, A. (2014) · Elsevier eBooks · doi:10.1016/b978-0-12-420145-3.00009-2 · Cited by 18
Smart Polymer Gels: Properties, Synthesis, and Applications
Montero, A., Valencia, L., Corrales, R., Jorcano, J. L., & Velasco, D. (2019) · Elsevier eBooks · doi:10.1016/b978-0-08-102416-4.00009-0 · Cited by 14
Cellular Approaches to Tissue-Engineering of Skin: A Review
Yeong, W. L. N. W. Y. (2015) · Journal of Tissue Science & Engineering · doi:10.4172/2157-7552.1000150 · Cited by 12
Current Progress in Bioprinting
Zhang, X., Huang, Y., Gao, G., & Cui, X. (2017) · Advanced structured materials · doi:10.1007/978-981-10-3328-5_6 · Cited by 9
Cited by
Printability and shape fidelity of bioinks in 3D bioprinting
Schwab, A., Levato, R., D’Este, M., Piluso, S., Eglin, D., & Malda, J. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00084 · Cited by 1,359
CRISPR/Cas9 therapeutics: progress and prospects
Li, T., Yang, Y., Qi, H., Cui, W., Zhang, L., Fu, X., He, X., Liu, M., Li, P.-F., & Yu, T. (2023) · Signal Transduction and Targeted Therapy · doi:10.1038/s41392-023-01309-7 · Cited by 719
Inkjet Bioprinting of Biomaterials
Li, X., Liu, B., Pei, B., Chen, J., Zhou, D., Peng, J., Zhang, X., Jia, W., & Xu, T. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00008 · Cited by 686
Understanding Nanocellulose–Water Interactions: Turning a Detriment into an Asset
Solhi, L., Guccini, V., Heise, K., Solala, I., Niinivaara, E., Xu, W., Mihhels, K., Kröger, M., Meng, Z., Wohlert, J., et al. (2023) · Chemical Reviews · doi:10.1021/acs.chemrev.2c00611 · Cited by 506
Arif, Z. U., Khalid, M. Y., Noroozi, R., Sadeghianmaryan, A., Jalalvand, M., & Hossain, M. (2022) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2022.07.140 · Cited by 395
Metadata
- Authors
- Tamay, D. G., Dursun Usal, T., Alagoz, A. S., Yucel, D., Hasirci, N., & Hasirci, V.
- Venue
- Frontiers in Bioengineering and Biotechnology
- Publisher
- Frontiers Media SA
- Published
- 2019-07-09
- Volume
- 7
- Pages
- 164-164
- ISSN
- 2296-4185 (ISSN-L)
- OpenAlex
- W2950418377
- Cited by
- 417
- References
- 183
- FWCI
- 17.83
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.