The DOI matches its Crossref record; 126 of the 126 references it cites were found in a registry or an index; 21 of the 134 sources its claims cite were checked for support.
Electrochemical Direct Lithium Extraction: A Review of Electrodialysis and Capacitive Deionization Technologies
Open accessAbstract
The rapid expansion of lithium-ion battery (LIB) markets for electric vehicles and renewable energy storage has exponentially increased lithium demand, driving research into sustainable extraction methods. Traditional lithium recovery from brine using evaporation ponds is resource intensive, consuming vast amounts of water and causing severe environmental issues. In response, Direct Lithium Extraction (DLE) technologies have emerged as more efficient, eco-friendly alternatives. This review explores two promising electrochemical DLE methods: Electrodialysis (ED) and Capacitive Deionization (CDI). ED employs ion-exchange membranes (IEMs), such as cation exchange membranes, to selectively transport lithium ions from sources like brine and seawater and achieves high recovery rates. IEMs utilize chemical and structural properties to enhance the selectivity of Li+ over competing ions like Mg2+ and Na+. However, ED faces challenges such as high energy consumption, membrane fouling, and reduced efficiency in ion-rich solutions. CDI uses electrostatic forces to adsorb lithium ions onto electrodes, offering low energy consumption and adaptability to varying lithium concentrations. Advanced variants, such as Membrane Capacitive Deionization (MCDI) and Flow Capacitive Deionization (FCDI), enhance ion selectivity and enable continuous operation. MCDI incorporates IEMs to reduce co-ion interference effects, while FCDI utilizes liquid electrodes to enhance scalability and operational flexibility. Advancements in electrode materials remain crucial to enhance selectivity and efficiency. Validating these methods at the pilot scale is crucial for assessing performance, scalability, and economic feasibility under real-world conditions. Future research should focus on reducing operational costs, developing more durable and selective electrodes, and creating integrated systems to enhance overall efficiency. By addressing these challenges, DLE technologies can provide sustainable solutions for lithium resource management, minimize environmental impact, and support a low-carbon future.
Overview
CoChat Summary
TL;DR
This review examines electrochemical direct lithium extraction (DLE), focusing on electrodialysis (ED) and capacitive deionization (CDI) and their advanced variants. It synthesizes mechanisms, performance metrics, pilot-scale demonstrations, and challenges for sustainable lithium recovery from brine and seawater.
Key findings
- ED and CDI are both promising electrochemical DLE routes: ED uses ion-exchange membranes for high lithium recovery/selectivity, while CDI uses electrostatic adsorption with lower energy consumption and adaptability to varying lithium concentrations; MCDI and FCDI improve selectivity and enable continuous operation.
- ED examples include a modified CEM with Li/Na molar selectivity of 32.2 (62.3% higher than conventional CEM), BMED achieving 99.8% lithium removal and 86.4% recovery at 20 V, SED achieving 76.45% Li recovery with 0.66 kWh/mol Li at 10 V, and ILM-ED reducing Mg/Li from 50:1 to 0.5:1 with 65% current efficiency and 16 Wh·g⁻¹ Li.
- CDI examples include LMO/GO electrodes with a lithium separation factor of 47.8, 80% capacity retention after 150 cycles, and 720.2 µmol·g⁻¹ Li⁺ adsorption; MCDI with ZIF-8-PDA membranes showing Li/Na selectivity of 1.50 and Li/K of 1.85 at 0.5 V; FCDI Li-MFCDI showing Li/Na selectivity of 141 and Li/K of 46 with 16.70 kWh/kg energy consumption; and HCDI with β Li/Mg of 2.14 and over 70% lithium release efficiency.
- Pilot-scale results include ED with an average flux of 5.73 mol·m⁻²·h⁻¹ and 0.15 kWh/mol, ED enriching Li⁺ from 0.035 mM to 62 mM with purity rising from 0.0048% to 88% and an enrichment factor of 1800 at 0.25 m³/h, and CDI reducing feed salinity from 1 g/L to 0.5 g/L at about 200 L/h with 0.85–0.9 V and approximately 30% energy recovery.
Methods
- Design: narrative review of electrochemical DLE, with emphasis on ED and CDI, covering conventional lithium extraction, electrochemical mechanisms, advanced variants, pilot-scale case studies, and future research directions.
- Data: literature search via Google Scholar using keywords “lithium” and “direct lithium extraction” for 2012–2023; tables compile prior ED/CDI studies and pilot-scale results.
- Analysis: comparative synthesis of process parameters such as lithium source, flow rate, applied voltage, recovery ratio, separation/selectivity factors, adsorption capacity, and energy consumption; no primary experiments were conducted.
Limitations
- Stated: ED faces high energy consumption, membrane fouling/scaling, concentration polarization, high installation and operational costs, and periodic membrane replacement; CDI has limited effectiveness for high-salinity brine, electrode lifespan limits, co-ion expulsion, and is not yet mature for very large-scale desalination.
- Stated: pilot-scale barriers include fouling/scaling, declining energy efficiency with increasing salinity, and the cost and durability of ion-exchange membranes and high-surface-area electrodes.
- Evident from the text: as a narrative review, it does not report a systematic search protocol or quality appraisal, and many table entries are “N.A.” while performance comparisons span heterogeneous feed solutions and operating conditions, limiting direct comparability.
Model-written summary. Check it against the paper before relying on it.
Integrity signals
Registry
Cites
Statistics
Figures
![Figure 1 Graphical representation of world lithium reserves created by the authors based on data Figure 1. Graphical representation of world lithium reserves created by the authors based on data from [8].](https://figures.cochat.ai/paper-figures/96cf954654a245069fdc16ddd2757d7e/electrochemical-direct-lithium-extraction-a-review-of-electrodialysis-and-figure-1.png)





Verification
Claims the paper makes
19 Valid · 3 Not valid · 91 Not checked · 29 Own results and interpretations
Every source the paper cites for this claim was checked and supports it.
In the paper
“However, conventional lithium extraction methods result in 85-95% water loss from brine, raising significant concerns about their impact on the water balance and biodiversity of Salt Lake ecosystems [17].”
What the sources say
- Supportedcites [17] Flexer, 2018, Lithium recovery from brines: A vital raw material for green energies with a potential environmental impact in its mining and processing, Sci. Total Environ. source
The paper’s section on sustainability issues (pp. 7–9) identifies water use and flora and fauna conservation as concerns with conventional evaporative extraction. It says that changes to the region’s water balance could affect local flora and fauna; it presents this as a potential impact, not an established loss of biodiversity. (LLM, conf=0.92)
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Supported
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“However, conventional lithium extraction methods result in 85-95% water loss from brine, raising significant concerns about their impact on the water balance and biodiversity of Salt Lake ecosystems [17].”
What the sources say
- Partly supportedcites [17] Flexer, 2018, Lithium recovery from brines: A vital raw material for green energies with a potential environmental impact in its mining and processing, Sci. Total Environ. sourceExperimental — accuracy not yet measured
Section 5, “Sustainability issues of the evaporitic technology” (page unavailable), says that up to 95% of the original brine water needs to be evaporated in conventional processing. It does not give an 85% lower bound or establish 85–95% as the usual range. The section also treats effects on the water balance as dependent on local conditions, rather than a uniform consequence. (LLM, conf=0.86)
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Partly supported
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“However, the adsorption process has the drawback of performance degradation in ion-sieve materials over time, resulting in reduced efficiency and increased operational costs due to frequent replacements [35].”
What the sources say
- Partly supportedcites [35] Murphy, O., and Haji, M.N. (2022). A Review of Technologies for Direct Lithium Extraction from Low Li+ Concentration Aqueous Solutions. Front. Chem. Eng., 30. sourceExperimental — accuracy not yet measured
Section 6, “Lithium-ion sieve adsorption,” says ion sieves can disintegrate during adsorption/desorption cycling, reducing adsorption capacity and separation efficiency. It also says operating costs rise because more sieve is needed to compensate for those losses, but it does not establish that replacements are frequent. (LLM, conf=0.84)
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Partly supported
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“ED systems are known for their high initial installation costs and significant energy consumption when processing high-concentration brine”
What the sources say
- Partly supportedcites [71] Dammak, L., Fouilloux, J., Bdiri, M., Larchet, C., Renard, E., Baklouti, L., Sarapulova, V., Kozmai, A., and Pismenskaya, N. (2021). A Review on Ion-Exchange Membrane Fouling during the Electrodialysis Process in the Food Industry, Part 1: Types, Effects, Characterization Methods, Fouling Mechanisms and Interactions. Membranes, 11. sourceExperimental — accuracy not yet measured
The Introduction and Conclusions say that membrane fouling can increase ED energy consumption. They do not link that increase to processing high-concentration brine; the Introduction instead describes electricity consumption in desalination as acceptable. Searches for high-concentration brine and high-salinity energy use found no supporting passage. (LLM, conf=0.84)
boostedstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Partly supported
The cited sources that could be checked couldn’t confirm or dispute this claim.
In the paper
“ED systems are known for their high initial installation costs and significant energy consumption when processing high-concentration brine”
What the sources say
- Could not verifycites [71] Dammak, L., Fouilloux, J., Bdiri, M., Larchet, C., Renard, E., Baklouti, L., Sarapulova, V., Kozmai, A., and Pismenskaya, N. (2021). A Review on Ion-Exchange Membrane Fouling during the Electrodialysis Process in the Food Industry, Part 1: Types, Effects, Characterization Methods, Fouling Mechanisms and Interactions. Membranes, 11. sourceExperimental — accuracy not yet measured
The Conclusions (page unavailable) call ion-exchange membranes the most expensive component of ED modules, but do not discuss initial installation costs. Searches for installation and capital costs found no passage establishing that ED systems have high upfront costs. (LLM, conf=0.72)
boosted- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Could not verify
100 more claims · 11 with their cited sources checked
Create a free account to see all 142 claims and to verify the 1 reference still open.
- It may state two separate claims as one. 26
- Probably not a substantial claim. 18
Citations
Cites
Ghaffour, N., Missimer, T. M., & Amy, G. L. (2013) · Desalination · doi:10.1016/j.desal.2012.10.015 · Cited by 1,603 · cited 1×
“Specifically, CDI achieves an energy consumption of less than 0.5–2.5 kWh/m 3 when treating water with TDS concentrations below 2000 mg/L, making it highly efficient compared to traditional desalination methods such as reverse osmosis [23,25,26].”
InfluentialElectrodialysis, a mature technology with a multitude of new applications
Strathmann, H. (2010) · Desalination · doi:10.1016/j.desal.2010.04.069 · Cited by 1,545
Ion exchange membranes: State of their development and perspective
Xu, T. (2005) · Journal of Membrane Science · doi:10.1016/j.memsci.2005.05.002 · Cited by 1,364 · cited 2×
“In selective dialysis (SED), monovalent-selective ion exchange membranes (IEMs used to replace standard IEMs in conventional ED systems SED is a separation process based on ion-exchange membranes, offering high selectivity and making it essential for the separation of ionic species [65,66].”
Oren, Y. (2008) · Desalination · doi:10.1016/j.desal.2007.08.005 · Cited by 1,180
Tong, T., & Elimelech, M. (2016) · Environmental Science & Technology · doi:10.1021/acs.est.6b01000 · Cited by 1,126 · cited 1×
“However, ED also consumes more energy, requiring approximately 7–15 kWh/m 3 of feed water to concentrate brine to high salinity levels [72].”
Electrodialysis desalination for water and wastewater: A review
Al-Amshawee, S., Yunus, M. Y. B. M., Azoddein, A. A. M., Hassell, D. G., Dakhil, I. H., & Hasan, H. A. (2020) · Chemical Engineering Journal · doi:10.1016/j.cej.2019.122231 · Cited by 964
Anderson, M. A., Cudero, A. L., & Palma, J. (2010) · Electrochimica Acta · doi:10.1016/j.electacta.2010.02.012 · Cited by 943 · cited 1×
“Additionally, their energy efficiency decreases with increasing salinity; CDI, in particular, requires significant energy for electrode regeneration, making it less competitive than reverse osmosis in high-salinity contexts [115].”
Grosjean, C., Miranda, P. H., Perrin, M., & Poggi, P. (2012) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2011.11.023 · Cited by 847 · cited 2×
“Among them, Chile stands out with 34%, making it the leading country in lithium reserves and a key player in lithium production [7,8].”
Flexer, V., Baspineiro, C. F., & Galli, C. I. (2018) · Science of the Total Environment · doi:10.1016/j.scitotenv.2018.05.223 · Cited by 768 · cited 4×
“Additionally, it requires extensive land areas and is highly dependent on climatic conditions, leading to low predictability and sustainability [17].”
InfluentialEnvironmental impact of direct lithium extraction from brines
Vera, M. L., Torres, W. R., Galli, C. I., Chagnes, A., & Flexer, V. (2023) · Nature Reviews Earth & Environment · doi:10.1038/s43017-022-00387-5 · Cited by 766 · cited 2×
“By 2030, EV demand is expected to reach 142 million units, with lithium carbonate demand projected to rise to 3–4 million metric tons (Mt) [9,10].”
Membrane-based technologies for lithium recovery from water lithium resources: A review
Li, X., Mo, Y., Qing, W., Shao, S., Tang, C. Y., & Li, J. (2019) · Journal of Membrane Science · doi:10.1016/j.memsci.2019.117317 · Cited by 756 · cited 2×
“DLE methods, serving as an alternative to the slow solar evaporation process, include ion exchange [18], adsorption [19,20], solvent extraction [21], membrane separation [22], and electrochemical techniques [23,24].”
Recent developments on ion-exchange membranes and electro-membrane processes
Nagarale, R. K., Gohil, G. S., & Shahi, V. K. (2006) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2005.09.005 · Cited by 735 · cited 2×
“In selective dialysis (SED), monovalent-selective ion exchange membranes (IEMs used to replace standard IEMs in conventional ED systems SED is a separation process based on ion-exchange membranes, offering high selectivity and making it essential for the separation of ionic species [65,66].”
Desalination via a New Membrane Capacitive Deionization Process Utilizing Flow-Electrodes
Jeon, S.-I., Park, H.-R., Yeo, J.-G., Yang, S., Cho, C. H., Han, M. H., & Kim, D. K. (2013) · Energy & Environmental Science · doi:10.1039/c3ee24443a · Cited by 727 · cited 1×
“This design allows for the easy expansion of electrode capacity and enables the continuous removal of up to 95% of seawater ions without the need for an additional “ion release” stage [97].”
Recovery of lithium from Uyuni salar brine
An, J. W., Kang, D. J., Tran, K. T., Kim, M. J., Lim, T., & Tran, T. (2012) · Hydrometallurgy · doi:10.1016/j.hydromet.2012.02.008 · Cited by 509
Systematic Review of Lithium Extraction from Salt-Lake Brines via Precipitation Approaches
Zhang, Y., Hu, Y., Wang, L., & Sun, W. (2019) · Minerals Engineering · doi:10.1016/j.mineng.2019.105868 · Cited by 408 · cited 2×
“However, the purity of lithium extracted from conventional brine methods is only around 50–80%, requiring further processing to achieve similar purity levels [37] Lithium extraction via solar evaporation and chemical precipitation has drawbacks.”
Lithium recovery from brine: Recent developments and challenges
Khalil, A., Mohammed, S., Hashaikeh, R., & Hilal, N. (2022) · Desalination · doi:10.1016/j.desal.2022.115611 · Cited by 396 · cited 4×
“No-tably, brines contain lithium at concentrations of up to 100–1000 ppm, making them highly attractive resources for lithium recovery [16].”
InfluentialZhao, R., Porada, S., Biesheuvel, P. M., & van der Wal, A. (2013) · Desalination · doi:10.1016/j.desal.2013.08.017 · Cited by 383 · cited 1×
“Specifically, CDI achieves an energy consumption of less than 0.5–2.5 kWh/m 3 when treating water with TDS concentrations below 2000 mg/L, making it highly efficient compared to traditional desalination methods such as reverse osmosis [23,25,26].”
InfluentialNie, X.-Y., Sun, S.-Y., Sun, Z., Song, X., & Yu, J.-G. (2017) · Desalination · doi:10.1016/j.desal.2016.05.010 · Cited by 380
Choi, J., Dorji, P., Shon, H. K., & Hong, S. (2019) · Desalination · doi:10.1016/j.desal.2018.10.013 · Cited by 367 · cited 1×
“Moreover, the design and development of innovative CDI electrode materials enable the selective capture of specific ions, facilitating more efficient and precise lithium recovery from complex brine compositions [94].”
The Lithium future—Resources, recycling, and the environment
Wanger, T. C. (2011) · Conservation Letters · doi:10.1111/j.1755-263x.2011.00166.x · Cited by 345 · cited 2×
“…and mineral washing with sodium carbonate, which, if breached, could leak harmful chemicals into the environment and pollute water sources [40]. involves brine evaporation and mineral washing with sodium carbonate, which, if breached, could leak harmful chemicals into the environment and…”
Zhang, C., Ma, J., Wu, L., Sun, J., Wang, L., Li, T., & Waite, T. D. (2021) · Environmental Science & Technology · doi:10.1021/acs.est.0c06552 · Cited by 323 · cited 1×
“FCDI mitigates the co-ion expulsion effect, enhancing charge and removal efficiency, while slurry electrodes allow for continuous ion adsorption and desorption, optimizing overall performance [98].”
Lithium extraction from salt lake brines with high magnesium/lithium ratio: a review
Zhu, R., Wang, S., Srinivasakannan, C., Li, S., Yin, S., Zhang, L., Jiang, X., Zhou, G., & Zhang, N. (2023) · Environmental Chemistry Letters · doi:10.1007/s10311-023-01571-9 · Cited by 318
Materials for lithium recovery from salt-lake brine
Xu, P., Hong, J., Qian, X., Xu, Z., Xia, H., Tao, X., Xu, Z., & Ni, Q.-Q. (2021) · Journal of Materials Science · doi:10.1007/s10853-020-05019-1 · Cited by 296 · cited 1×
“Lithium’s small ionic radius (0.6 nm) gives it high electrochemical activity, along with a high specific heat capacity and a low coefficient of thermal expansion [2–4].”
InfluentialChoubey, P. K., Chung, K.-S., Kim, M.-S., Lee, J.-C., & Srivastava, R. R. (2017) · Minerals Engineering · doi:10.1016/j.mineng.2017.04.008 · Cited by 290
Self-citationSocio-Environmental Impacts of Lithium Mineral Extraction: Towards a Research Agenda
Agusdinata, D. B., Liu, W., Eakin, H., & Romero, H. (2018) · Environmental Research Letters · doi:10.1088/1748-9326/aae9b1 · Cited by 284 · cited 2×
“Moreover, lithium extraction from brines poses higher environmental and occupational health risks compared to other lithium sources [38].”
Zhong, J., Lin, S., & Yu, J. (2021) · Desalination · doi:10.1016/j.desal.2021.114983 · Cited by 283
Chen, Q.-B., Ji, Z.-Y., Liu, J., Zhao, Y.-Y., Wang, S.-Z., & Yuan, J.-S. (2018) · Journal of Membrane Science · doi:10.1016/j.memsci.2017.11.040 · Cited by 266
Direct lithium extraction: A new paradigm for lithium production and resource utilization
Farahbakhsh, J., Arshadi, F., Mofidi, Z., Mohseni-Dargah, M., Kök, C., Assefi, M., Soozanipour, A., Zargar, M., Asadnia, M., Boroumand, Y., et al. (2024) · Desalination · doi:10.1016/j.desal.2023.117249 · Cited by 260
Preliminary study on recovering lithium from high Mg2+/Li+ ratio brines by electrodialysis
Ji, Z.-Y., Chen, Q.-B., Yuan, J.-S., Liu, J., Zhao, Y.-Y., & Feng, W.-X. (2017) · Separation and Purification Technology · doi:10.1016/j.seppur.2016.08.006 · Cited by 251
Extracting Minerals from Seawater: An Energy Analysis
Bardi, U. (2010) · Sustainability · doi:10.3390/su2040980 · Cited by 221
Song, Y., & Zhao, Z. (2018) · Separation and Purification Technology · doi:10.1016/j.seppur.2018.06.022 · Cited by 221 · cited 1×
“These properties, combined with its high energy density and electrochemical potential (3.045 V), make lithium a crucial material for lithium-ion batteries (LIBs) [5,6].”
InfluentialA review on lithium recovery using electrochemical capturing systems
Zavahir, S., Elmakki, T., Gulied, M., Ahmad, Z., Al-Sulaiti, L., Shon, H. K., Chen, Y., Park, H., Batchelor, B., & Han, D. S. (2021) · Desalination · doi:10.1016/j.desal.2020.114883 · Cited by 220 · cited 3×
“Lithium’s small ionic radius (0.6 nm) gives it high electrochemical activity, along with a high specific heat capacity and a low coefficient of thermal expansion [2–4].”
InfluentialLithium Recovery Using Electrochemical Technologies: Advances and Challenges
Wu, L., Zhang, C., Kim, S., Hatton, T. A., Mo, H., & Waite, T. D. (2022) · Water Research · doi:10.1016/j.watres.2022.118822 · Cited by 214 · cited 3×
“Li separation from multicomponent mixtures with a high Mg/Li ratio has been demonstrated to be technically and potentially economically feasible with the use of specific IEMs [51].”
Electrochemical Technologies for Lithium Recovery from Liquid Resources: A Review
Wang, J., Yue, X., Wang, P., Yu, T., Du, X., Hao, X., Abudula, A., & Guan, G. (2022) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2021.111813 · Cited by 211 · cited 1×
“…traditional solar evaporation and precipitation methods have significant drawbacks, including high energy consumption, lengthy processing times, complex treat-ment stages, and potential secondary contamination, thereby driving interest toward more efficient extraction technologies like DLE [42].”
Review on the Electrochemical Extraction of Lithium from Seawater/Brine
Zhao, X., Yang, H., Wang, Y., & Sha, Z. (2019) · Journal of Electroanalytical Chemistry · doi:10.1016/j.jelechem.2019.113389 · Cited by 199 · cited 2×
“In addition, the method of recovering lithium from lithium ore is costly, challenging, and environmentally dangerous [13,14].”
Guo, Z.-Y., Ji, Z.-Y., Chen, Q.-B., Liu, J., Zhao, Y.-Y., Li, F., Liu, Z.-Y., & Yuan, J.-S. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.05.077 · Cited by 198 · cited 1×
“Guo et al. note that selective ED (SED) was used for the prefractionation of LiCl from Salt Lake brines with an optimal voltage of 10 V, which resulted in a higher Li recovery rate of 76.45% and an appropriate specific energy consumption (ESEC) of 0.66 kWh/mol Li [68].”
InfluentialNie, X.-Y., Sun, S.-Y., Song, X., & Yu, J.-G. (2017) · Journal of Membrane Science · doi:10.1016/j.memsci.2017.02.020 · Cited by 195 · cited 1×
“…ED can The BPM features a sandwich-like structure consisting of an AEM, a CEM, and an intermediate hydrophilic layer where water molecules dissociate + the + and from and of ) are process for the effectively separate specific ions, such as monovalent and multivalent ions from a solution [67].”
Recent advances in lithium extraction from salt lake brine using coupled and tandem technologies
Zhang, J., Cheng, Z., Qin, X., Gao, X., Wang, M., & Xiang, X. (2023) · Desalination · doi:10.1016/j.desal.2022.116225 · Cited by 195 · cited 1×
“Lithium extraction from Salt Lake brines is cost effective and relatively simple to operate, compared to traditional ore extraction [15].”
Hoshino, T. (2015) · Desalination · doi:10.1016/j.desal.2014.12.018 · Cited by 192
Shi, W., Liu, X., Ye, C., Cao, X., Gao, C., & Shen, J. (2019) · Separation and Purification Technology · doi:10.1016/j.seppur.2018.09.006 · Cited by 190 · cited 2×
“CDI operates with low energy consumption and can adapt to varying lithium concentrations in brine, making it particularly advantageous for lithium extraction [87].”
Highly selective lithium recovery from high Mg/Li ratio brines
Liu, G., Zhao, Z., & He, L. (2020) · Desalination · doi:10.1016/j.desal.2019.114185 · Cited by 185 · cited 1×
“%) and lower specific energy consumption (16 Wh · g − 1 Li) compared to conventional ED methods [70].”
Hoshino, T. (2013) · Desalination · doi:10.1016/j.desal.2013.02.014 · Cited by 174
Ji, P.-Y., Ji, Z.-Y., Chen, Q.-B., Liu, J., Zhao, Y.-Y., Wang, S.-Z., Li, F., & Yuan, J.-S. (2018) · Separation and Purification Technology · doi:10.1016/j.seppur.2018.06.012 · Cited by 169
Lithium extraction from salt lakes with different hydrochemical types in the Tibet Plateau
Ding, T., Zheng, M., Peng, S., Lin, Y., Zhang, X., & Li, M. (2023) · Geoscience Frontiers · doi:10.1016/j.gsf.2022.101485 · Cited by 168 · cited 1×
“The greatest quantity of lithium resources is found in seawater, which contains over 230 billion tons of lithium, thousands of times more than the entire amount found in lithium ore and brine [12].”
Use of bipolar membranes for generation of acid and base — an engineering and economic analysis
Nagasubramanian, K., Chlanda, F. P., & Liu, K. (1977) · Journal of Membrane Science · doi:10.1016/s0376-7388(00)83237-8 · Cited by 165 · cited 2×
“Using ion-selective exchange membranes, ED can The bipolar membrane ED (BMED) process is a technology that combines traditional ED with bipolar membranes [63].”
Qu, Y., Campbell, P. G., Gu, L., Knipe, J. M., Dzenitis, E., Santiago, J. G., & Stadermann, M. (2016) · Desalination · doi:10.1016/j.desal.2016.09.014 · Cited by 159 · cited 2×
“Additionally, reverse voltage desorption can be used to regenerate saturated electrodes [91]. purification, and the recovery of high-value ions [89,90].”
A review of technologies for direct lithium extraction from low Li+ concentration aqueous solutions
Murphy, O., & Haji, M. N. (2022) · Frontiers in Chemical Engineering · doi:10.3389/fceng.2022.1008680 · Cited by 157
Separating Lithium and Magnesium in Brine by Aluminum-Based Materials
Liu, X., Zhong, M., Chen, X., & Zhao, Z. (2018) · Hydrometallurgy · doi:10.1016/j.hydromet.2018.01.005 · Cited by 153 · cited 1×
“Solvent extraction is a promising method for lithium recovery from brine due to its low cost and high product However, various organic extractants used in solvent extraction have the potential to cause environmental damage [46]. yield [16].”
Folaranmi, G., Bechelany, M., Sistat, P., Cretin, M., & Zaviska, F. (2020) · Membranes · doi:10.3390/membranes10050096 · Cited by 149 · cited 1×
“MCDI significantly enhances the efficiency of CDI by improving operating conditions such as charge efficiency and ion adsorption [96].”
Selectivity of a Lithium‐Recovery Process Based on LiFePO4
Trócoli, R., Battistel, A., & Mantia, F. L. (2014) · Chemistry – A European Journal · doi:10.1002/chem.201403535 · Cited by 148
Bunani, S., Arda, M., Kabay, N., Yoshizuka, K., & Nishihama, S. (2017) · Desalination · doi:10.1016/j.desal.2017.04.017 · Cited by 148
Mends, E. A., & Chu, P. (2023) · Journal of environmental chemical engineering · doi:10.1016/j.jece.2023.110710 · Cited by 143 · cited 2×
“Lithium is primarily found in brine resources, such as Salt Lakes, closed basins, and geothermal fluids [31], where it is dissolved in high-concentration brine solutions.”
Bunani, S., Yoshizuka, K., Nishihama, S., Arda, M., & Kabay, N. (2017) · Desalination · doi:10.1016/j.desal.2017.09.029 · Cited by 138
Hu, B., Shang, X., Nie, P., Zhang, B., Yang, J., & Liu, J. (2021) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2021.12.181 · Cited by 137
Review of Concepts and Applications of Electrochemical Ion Separation (EIONS) Process
Yoon, H., Lee, J., Kim, S., & Yoon, J. (2019) · Separation and Purification Technology · doi:10.1016/j.seppur.2018.12.071 · Cited by 133
Zhao, Z., Liu, G., Jia, H., & He, L. (2020) · Journal of Membrane Science · doi:10.1016/j.memsci.2019.117685 · Cited by 132 · cited 1×
“This process incorporates Li + selective organic liquid between two cation exchange membranes, forming a liquid film that exhibits high Li + selectivity and exceptional stability [69].”
Su, H., Li, Z., Zhang, J., Zhu, Z., Wang, L., & Qi, T. (2020) · Hydrometallurgy · doi:10.1016/j.hydromet.2020.105487 · Cited by 130
Shang, X., Hu, B., Nie, P., Shi, W., Hussain, T., & Liu, J. (2020) · Separation and Purification Technology · doi:10.1016/j.seppur.2020.118009 · Cited by 127
Kim, Y., Walker, W. S., & Lawler, D. F. (2012) · Water Research · doi:10.1016/j.watres.2012.01.004 · Cited by 125
Lithium carbonate recovery from lithium-containing solution by ultrasound assisted precipitation
Zhao, C., Zhang, Y., Cao, H., Zheng, X., Gerven, T. V., Hu, Y., & Sun, Z. H. I. (2018) · Ultrasonics Sonochemistry · doi:10.1016/j.ultsonch.2018.12.025 · Cited by 124 · cited 1×
“The Li 2 CO 3 nuclei develop into precipitated particles [34 which then aggregate into larger particles [30].”
Lee, D.-H., Ryu, T., Shin, J., Ryu, J. C., Chung, K.-S., & Kim, Y. H. (2017) · Hydrometallurgy · doi:10.1016/j.hydromet.2017.09.005 · Cited by 123 · cited 3×
“[43,44].”
InfluentialLithium capturing from geothermal water by hybrid capacitive deionization
Siekierka, A., Tomaszewska, B., & Bryjak, M. (2018) · Desalination · doi:10.1016/j.desal.2018.02.003 · Cited by 121
Regionalized life cycle assessment of present and future lithium production for Li-ion batteries
Schenker, V., Oberschelp, C., & Pfister, S. (2022) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2022.106611 · Cited by 120 · cited 2×
“…regeneration using acidic solutions, which can lead to higher operating costs and potential environmental issues, including chemical waste and contamination Solvent extraction is a promising method for lithium recovery from brine due to its low cost and high product yield [16]. risks [45].”
Krishnan, R., & Gopan, G. (2024) · Cleaner Engineering and Technology · doi:10.1016/j.clet.2024.100749 · Cited by 115 · cited 3×
“These substances, which include polymers, clay minerals, and zeolites, have a low affinity for other ions in the solution but a considerable attraction to lithium ions [36].”
InfluentialAdvances and promotion strategies of membrane-based methods for extracting lithium from brine
Zhang, Y., Yu, D., Jia, C., Sun, L., Tong, A., Wang, Y., Wang, Y., Huang, L., & Tang, J. (2023) · Desalination · doi:10.1016/j.desal.2023.116891 · Cited by 113 · cited 1×
“ED is an electrically driven separation process recognized as an emerging membrane separation technology for lithium extraction [60].”
Lithium: Production and estimated consumption. Evidence of persistence
Gil‐Alana, L. A., & Monge, M. (2019) · Resources Policy · doi:10.1016/j.resourpol.2019.01.006 · Cited by 108
Boroumand, Y., & Razmjou, A. (2024) · Desalination · doi:10.1016/j.desal.2024.117406 · Cited by 107 · cited 1×
“DLE methods, serving as an alternative to the slow solar evaporation process, include ion exchange [18], adsorption [19,20], solvent extraction [21], membrane separation [22], and electrochemical techniques [23,24].”
Hoshino, T. (2013) · Fusion Engineering and Design · doi:10.1016/j.fusengdes.2013.06.009 · Cited by 100
Modeling continuous flow-electrode capacitive deionization processes with ion-exchange membranes
Rommerskirchen, A., Ohs, B., Hepp, K. A., Femmer, R., & Weßling, M. (2017) · Journal of Membrane Science · doi:10.1016/j.memsci.2017.10.026 · Cited by 97
Dammak, L., Fouilloux, J., Bdiri, M., Larchet, C., Renard, E., Baklouti, L., Sarapulova, V., Kozmai, A., & Pismenskaya, N. (2021) · Membranes · doi:10.3390/membranes11100789 · Cited by 93 · cited 1×
“Additionally, membrane fouling and scaling can reduce efficiency, necessitating regular maintenance [71].”
Meng, Z., Wang, M., Cao, X., Wang, T., Wang, Y., Xu, Y., Liu, W., Chen, L., Huang, Y., & Liu, X. (2022) · Chemical Engineering Journal · doi:10.1016/j.cej.2022.136780 · Cited by 93
İpekçi, D., Kabay, N., Bunani, S., Altıok, E., Arda, M., Yoshizuka, K., & Nishihama, S. (2020) · Desalination · doi:10.1016/j.desal.2020.114313 · Cited by 87
Pramanik, B. K., Asif, M. B., Roychand, R., Shu, L., Jegatheesan, V., Bhuiyan, M., & Hai, F. I. (2020) · Chemosphere · doi:10.1016/j.chemosphere.2020.127623 · Cited by 87 · cited 2×
“Estimates suggest that demand could rise to 40 times by 2050 as a result of a move toward more environmentally friendly extraction methods [9,11].”
Luo, G., Li, X., Chen, L., Zhang, Y., Gu, J., Chao, Y., Zhu, W., Liu, Z., & Xu, C. (2023) · Chemical Engineering Journal · doi:10.1016/j.cej.2022.140928 · Cited by 86
Cerda, A., Quilaqueo, M., Barros, L., Seriche, G., Gim-Krumm, M., Santoro, S., Avci, A. H., Romero, J., Curcio, E., & Estay, H. (2021) · Journal of Water Process Engineering · doi:10.1016/j.jwpe.2021.102063 · Cited by 86 · cited 1×
“The evaporation process involves circulating the brine through a series of ponds with progressively increasing salinity, a procedure that often takes several months [32].”
Zhao, Y., Shi, W., der Bruggen, B. V., Gao, C., & Shen, J. (2018) · Advanced Materials Interfaces · doi:10.1002/admi.201701449 · Cited by 86
Jiang, D., Xu, R., Bai, L., Wu, W., Luo, D., Li, Z., Asahi, T., Mai, Y., Liu, Z., Yamauchi, Y., et al. (2024) · Coordination Chemistry Reviews · doi:10.1016/j.ccr.2024.215923 · Cited by 85 · cited 1×
“Commonly used materials include graphene, carbon nanoparticles, and lithium-ion sieves [52].”
Lawagon, C. P., Nisola, G. M., Cuevas, R. A. I., Torrejos, R. E. C., Kim, H., Lee, S., & Chung, W. (2018) · Separation and Purification Technology · doi:10.1016/j.seppur.2018.11.046 · Cited by 80
Yu, H., Hossain, S. M., Wang, C., Choo, Y., Naidu, G., Han, D. S., & Shon, H. K. (2023) · Desalination · doi:10.1016/j.desal.2023.116569 · Cited by 79
Lithium recovery system using electrostatic field assistance
Ryu, T., Lee, D.-H., Ryu, J. C., Shin, J., Chung, K., & Kim, Y. H. (2014) · Hydrometallurgy · doi:10.1016/j.hydromet.2014.11.005 · Cited by 79
İpekçi, D., Altıok, E., Bunani, S., Yoshizuka, K., Nishihama, S., Arda, M., & Kabay, N. (2018) · Desalination · doi:10.1016/j.desal.2018.10.001 · Cited by 77
Electrodialytic concentrating lithium salt from primary resource
Zhou, Y., Yan, H., Wang, X., Wu, L., Wang, Y., & Xu, T. (2017) · Desalination · doi:10.1016/j.desal.2017.10.013 · Cited by 77
Khakmardan, S., Rolinck, M., Cerdas, F., Herrmann, C., Giurco, D., Crawford, R., & Li, W. (2023) · Procedia CIRP · doi:10.1016/j.procir.2023.02.102 · Cited by 77 · cited 1×
“By 2030, EV demand is expected to reach 142 million units, with lithium carbonate demand projected to rise to 3–4 million metric tons (Mt) [9,10].”
Luo, G., Li, X., Chen, L., Chao, Y., & Zhu, W. (2023) · Desalination · doi:10.1016/j.desal.2022.116228 · Cited by 69 · cited 2×
“Several recent review articles have comprehensively explored DLE technologies, including adsorption, solvent extraction, and membrane separation, highlighting their potential for sustainable lithium recovery [28–30].”
Bazrgar Bajestani, M., Moheb, A., & Dinari, M. (2020) · Desalination · doi:10.1016/j.desal.2020.114476 · Cited by 69 · cited 2×
“9 The optimized CEM achieved a molar selectivity of 32.2 for lithium over sodium, which is 62.3% higher than that of the conventional CEM [62]. so-lution circulates through the electrode compartments, known as electrode rinse compartments [61].”
InfluentialJin, W., Hu, M., Sun, Z. H. I., Huang, C., & Zhao, H. (2020) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.127661 · Cited by 67
Lithium and Magnesium Separation from Brines by Hybrid Capacitive Deionization
Siekierka, A. (2022) · Desalination · doi:10.1016/j.desal.2022.115569 · Cited by 64 · cited 1×
“The separation process was influenced by the activity coefficient of the initial feed and the applied voltage, with lower lithium-ion concentrations enhancing separation efficiency [102].”
Choi, S., Chang, B., Kang, J. H., Diallo, M. S., & Choi, J. W. (2017) · Journal of Membrane Science · doi:10.1016/j.memsci.2017.07.043 · Cited by 60 · cited 1×
“For instance, a nanofiltration NF-FCDI hybrid system consumes 16~20% less energy to produce potable water compared to RO systems [100].”
Sun, B., Zhang, M., Huang, S., Wang, J., & Zhang, X. (2020) · Desalination · doi:10.1016/j.desal.2020.114793 · Cited by 58 · cited 1×
“DLE methods, serving as an alternative to the slow solar evaporation process, include ion exchange [18], adsorption [19,20], solvent extraction [21], membrane separation [22], and electrochemical techniques [23,24].”
Continuous Lithium Extraction from Aqueous Solution Using Flow-Electrode Capacitive Deionization
Ha, Y., Jung, H. B., Lim, H., Jo, P. S., Yoon, H., Yoo, C., Pham, T. K., Ahn, W., & Cho, Y. (2019) · Energies · doi:10.3390/en12152913 · Cited by 58
Guo, Z.-Y., Ji, Z.-Y., Wang, J., Chen, H.-Y., Liu, J., Zhao, Y.-Y., Li, F., & Yuan, J.-S. (2021) · Separation and Purification Technology · doi:10.1016/j.seppur.2020.118154 · Cited by 58
Environmental Lithium Exposure in the North of Chile—I. Natural Water Sources
Figueroa, L., Barton, S. A., Schull, W. J., Razmilic, B., Zumaeta, O., Young, A. H., Kamiya, Y. M., Hoskins, J. A., & Ilgren, E. B. (2012) · Biological Trace Element Research · doi:10.1007/s12011-012-9417-6 · Cited by 58
Huang, Q., Sheng, L., Wu, T., Huang, L., Yan, J., Li, M., Chen, Z., & Zhang, H. (2025) · Desalination · doi:10.1016/j.desal.2024.118197 · Cited by 57 · cited 1×
“This technology has attracted attention due to its low cost, low energy consumption, high efficiency, and no secondary chemical pollution [88].”
Melnikov, S., Sheldeshov, N., Zabolotsky, V., Loza, S., & Achoh, A. (2017) · Separation and Purification Technology · doi:10.1016/j.seppur.2017.07.085 · Cited by 57 · cited 1×
“It processed solutions with organic solvent contents ranging from 1.8% to 59%, and the final lithium hydroxide product was free of ionic impurities, highlighting the feasibility of using ED for lithium recovery in complex chemical environments [117].”
InfluentialZhang, X.-C., Wang, J., Ji, Z., Ji, P.-Y., Liu, J., Zhao, Y., Li, F., & Yuan, J. (2021) · Journal of environmental chemical engineering · doi:10.1016/j.jece.2021.106635 · Cited by 55
Jarma, Y. A., Çermikli, E., İpekçi, D., Altıok, E., & Kabay, N. (2021) · Desalination · doi:10.1016/j.desal.2020.114850 · Cited by 50 · cited 3×
“…and recovery of ions from a salt solution [64]. an electrical potential is applied, water splitting occurs at boundary layer of the bipolar membrane, supplying H and OH ions needed for acid base generation and thereby enabling the simultaneous removal and recovery of ions a salt solution [64].”
InfluentialJoo, H., Kim, S., Kim, S., Choi, M., Kim, S.-H., & Yoon, J. (2020) · Environmental Science: Water Research & Technology · doi:10.1039/c9ew00756c · Cited by 50 · cited 1×
“Operating at a rate of 0.25 m 3 /h, it demonstrated selective lithium-ion recovery compared to competing ions such as Na + , Mg 2+ , and Ca 2+ [118].”
InfluentialSelective sorbents for recovery of lithium ions by hybrid capacitive deionization
Siekierka, A., & Bryjak, M. (2021) · Desalination · doi:10.1016/j.desal.2021.115324 · Cited by 50
Siekierka, A. (2020) · Separation and Purification Technology · doi:10.1016/j.seppur.2019.116234 · Cited by 46
Yang, P., Hai, C., Sun, Y., Dong, S., He, X., Xu, Q., Ma, L., & Zhou, Y. (2024) · Chemical Engineering Journal · doi:10.1016/j.cej.2024.153330 · Cited by 45
Transparent and opaque pricing: The interesting case of lithium
Maxwell, P. (2015) · Resources Policy · doi:10.1016/j.resourpol.2015.03.007 · Cited by 45
Selective Ion Removal by Capacitive Deionization (CDI)-Based Technologies
Chai, S., Xi, J., Chen, L., He, W., Shen, J., & Gong, H. (2022) · Processes · doi:10.3390/pr10061075 · Cited by 43 · cited 1×
“Furthermore, the cost and durability of ion-exchange membranes and high-surface-area electrodes remain critical barriers [116].”
Lithium dedicated adsorbent for the preparation of electrodes useful in the ion pumping method
Siekierka, A., Kujawa, J., Kujawski, W., & Bryjak, M. (2018) · Separation and Purification Technology · doi:10.1016/j.seppur.2017.11.045 · Cited by 43
Novel anion exchange membrane for concentration of lithium salt in hybrid capacitive deionization
Siekierka, A., & Bryjak, M. (2018) · Desalination · doi:10.1016/j.desal.2018.10.009 · Cited by 42
Environmental Lithium Exposure in the North of Chile—II. Natural Food Sources
Figueroa, L. T., Razmillic, B., Zumeata, O., Aranda, G. N., Barton, S. A., Schull, W. J., Young, A. H., Kamiya, Y. M., Hoskins, J. A., & Ilgren, E. B. (2013) · Biological Trace Element Research · doi:10.1007/s12011-012-9543-1 · Cited by 38 · cited 1×
“The use use of large evaporation ponds in mining exposes lithium to elements like wind, raising contamination risks for nearby communities [39]. of large evaporation ponds in mining exposes lithium to elements like wind, raising contamination risks for nearby communities [39].”
Lim, J., Lee, H., Lee, S., & Hong, S. (2024) · Desalination · doi:10.1016/j.desal.2024.117403 · Cited by 37
Saif, H. M., Crespo, J. G., & Pawlowski, S. (2023) · Journal of Membrane Science Letters · doi:10.1016/j.memlet.2023.100059 · Cited by 35 · cited 1×
“Additionally, the energy consumption of the Li-MFCDI process was 16.70 kWh/kg, demonstrating its efficiency and sustainability [99].”
InfluentialElectrochemical Behaviors of Porous Spherical Spinel H1.6Mn1.6O4 with High Li+ Adsorption Capacity
Zhan, H., Qiao, Y., Qian, Z., Li, J., Wu, Z., & Liu, Z. (2023) · Separation and Purification Technology · doi:10.1016/j.seppur.2022.122485 · Cited by 30
Analysing the lithium industry: Demand, supply, and emerging developments
Maxwell, P. (2013) · Mineral Economics · doi:10.1007/s13563-013-0041-5 · Cited by 29 · cited 1×
“These properties, combined with its high energy density and electrochemical potential (3.045 V), make lithium a crucial material for lithium-ion batteries (LIBs) [5,6].”
InfluentialTechno-Economic Feasibility of Photovoltaic Solar Electrodialysis with Bipolar Membranes
Herrero-Gonzalez, M., Culcasi, A., Tamburini, A., Ibañez, R., Cipollina, A., & Micale, G. (2024) · Desalination · doi:10.1016/j.desal.2024.117624 · Cited by 29
Yang, J., Shang, X., Hu, B., Zhang, B., Wang, Y., Yang, J., & Liu, J. (2023) · Journal of Solid State Electrochemistry · doi:10.1007/s10008-023-05461-6 · Cited by 28
Xu, S., Liu, Z., Ji, W., & Li, H. (2021) · Separation and Purification Technology · doi:10.1016/j.seppur.2020.118294 · Cited by 26
Song, Z. Z., Chen, Y., Ren, N., & Duan, X. (2023) · Environmental Functional Materials · doi:10.1016/j.efmat.2023.11.001 · Cited by 25 · cited 2×
“Additionally, reverse voltage desorption can be used to regenerate saturated electrodes [91]. purification, and the recovery of high-value ions [89,90].”
Lithium Recovery from Seawater by Electrodialysis Using Ionic Liquid-based Membrane Technology
Hoshino, T. (2014) · ECS Transactions · doi:10.1149/05848.0173ecst · Cited by 25
Wang, X., Numedahl, N., & Jiang, C. (2024) · Applied Geochemistry · doi:10.1016/j.apgeochem.2024.106126 · Cited by 22 · cited 1×
“Additionally, DLE enables faster and more cost-effective lithium extraction not only from high-concentration brines found in Salt Lakes, salars, and geothermal resources but also from untapped resources such as oil and gas brines and groundwater brines [41].”
Yoon, H., Jeon, S., Min, T., Lee, C. K., & Lee, G. (2024) · Journal of Environmental Chemical Engineering · doi:10.1016/j.jece.2024.114259 · Cited by 19
Exploring ion-selective electrode materials for enhanced capacitive deionization
Zhao, X., Song, X., Yang, S., Hou, Y., Wang, Y., & Yang, H. Y. (2023) · Green Energy and Resources · doi:10.1016/j.gerr.2023.100043 · Cited by 18 · cited 2×
“Additionally, reverse voltage desorption can be used to regenerate saturated electrodes [91]. purification, and the recovery of high-value ions [89,90].”
Bae, S., Jeon, S.-I., Lee, W., Kim, Y., & Cho, K. (2023) · Desalination · doi:10.1016/j.desal.2023.116883 · Cited by 13 · cited 1×
“The system achieved selective Li + enrichment and deionized water production within a single cycle, with simultaneous competing ion adsorption and Li + liberation [101].”
Innovative Pilot Plant Capacitive Deionization for Desalination Brackish Water
Alotaibi, Z. S., Alharbi, K. N., Alharbi, Y., & Almoiqli, M. S. (2024) · Applied Water Science · doi:10.1007/s13201-023-02083-1 · Cited by 9 · cited 1×
“Optimized operational voltages between 0.85 and 0.9 V facilitated energy recovery of approximately 30%, underscoring its energy efficiency [119].”
InfluentialChoi, J.-M., Dorji, P., Shon, H. K., et al. (2019) · Desalination · doi:10.1016/j.desal.2019.114096 · Cited by 2
Saif, H. M., Crespo, J. G., & Pawlowski, S. (2023) · Zenodo (CERN European Organization for Nuclear Research) · doi:10.5281/zenodo.8298880
Regionalized life cycle assessment of present and future lithium production for Li-ion batteries
Schenker, V., Oberschelp, C., & Pfister, S. (2022) · Zenodo (CERN European Organization for Nuclear Research) · doi:10.5281/zenodo.8228814
Meng, Z., Wang, M., Cao, X., Wang, Y., Huang, Y., & Liu, X. (2022) · SSRN Electronic Journal · doi:10.2139/ssrn.4055905
Yang, P., Hai, C., Sun, Y., et al. (2024) · doi:10.2139/ssrn.4829833
Yu, H., Hossain, S. M., Wang, C., et al. (2023) · doi:10.2139/ssrn.4343141
Research works printed but not linked: 1
- Joo, 2023, Electrochemical Ion Separation Technology for Carbon Neutrality, Appl. Chem. Eng., 34, 331
Cited by
Advances in integrated membrane processes for sustainable lithium extraction
Tufa, R. A., Santoro, S., Flores-Fernández, C., Zegeye, R. B., Fuentealba, D., Aquino, M., Barraza, B., Inzillo, B. M., Nasirov, S., D'Andrea, G., et al. (2025) · Desalination · doi:10.1016/j.desal.2025.118899 · Cited by 37
Khan, S., Rahman, S. U., Shah, A., Akhtar, N., Hussain, Z., Ahmad, N., Kamika, I. A., Azizi, S., & Mâaza, M. (2026) · Desalination · doi:10.1016/j.desal.2026.119860 · Cited by 25
Han, S. A., Kim, H., Son, J., Ha, J., & Jo, C. (2026) · Chemical Engineering Journal · doi:10.1016/j.cej.2026.173831 · Cited by 16
Recovering Critical Metals from Brines: Technology Landscape, Circular Economy, and Future Trends
Abedi, M., Chang, A., Hassan, H. I., Yang, A., Hickethier, M., Bushagour, A., Aghajari, M. J., Stoerzinger, K. A., Layton, A., Abbasi, B., et al. (2026) · ACS Applied Energy Materials · doi:10.1021/acsaem.5c03407 · Cited by 21
Yelatontsev, D. O., Mukhachev, A. P., & Shevchenkо, V. (2025) · Desalination · doi:10.1016/j.desal.2025.119558 · Cited by 12
Metadata
- Authors
- Park, J., Lee, J., Shim, I.-T., Kim, E., Nam, S.-H., Koo, J.-W., & Hwang, T.-M.
- Affiliations
- Korea Institute of Civil Engineering and Building Technology (KR)
- Western University (CA)
- Department of Civil and Environmental Engineering, Korea University of Science & Technology, 217 Gajung-Ro, Yuseong-Gu, Daejeon 34113, Republic of Korea
- Corresponding author
- Hwang, Tae-Mun
- Venue
- Resources
- Publisher
- MDPI AG
- Published
- 2025-02-03
- Volume
- 14
- Issue
- 2
- Pages
- 27
- ISSN
- 2079-9276 (ISSN-L)
- OpenAlex
- W4407085251
- Cited by
- 44
- References
- 121
- Citations by year
- 2026: 37 · 2025: 7
- FWCI
- 10.77
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- Locations
- Resources (publishedVersion, cc-by)
- RePEc: Research Papers in Economics (submittedVersion)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Funders
- Ministry of Land, Infrastructure, and Transport (RS-2022-00144137, 20240065-001)
- KICT Research Program (RS-2022-00144137, 20240065-001)
- Ministry of Science and ICT (RS-2022-00144137, 20240065-001)
- Topics
- Physical Sciences › Chemical Engineering › Filtration and Separation › Membrane-based Ion Separation Techniques
- Physical Sciences › Materials Science › Metals and Alloys › Extraction and Separation Processes
- Physical Sciences › Environmental Science › Water Science and Technology › Membrane Separation Technologies
- Keywords
- direct lithium extraction, electrodialysis, capacitive deionization, lithium recovery, lithium brines, ion exchange membranes, cation exchange membrane, membrane fouling, electrode materials, membrane capacitive deionization, lithium-ion batteries
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
The claim verdicts this report counts are experimental: their accuracy is not yet measured.
A language model drew the claims from the paper on 2026-10-12, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).
A second model labelled each claim on 2026-10-12 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).
Cited sources are checked with a language model’s help (gpt-6-sol).
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.