The DOI matches its Crossref record; 46 of the 46 references it cites were found in a registry or an index.
Gelatin‐Methacrylamide Hydrogels as Potential Biomaterials for Fabrication of Tissue‐Engineered Cartilage Constructs
Abstract
Gelatin‐methacrylamide (gelMA) hydrogels are shown to support chondrocyte viability and differentiation and give wide ranging mechanical properties depending on several cross‐linking parameters. Polymer concentration, UV exposure time, and thermal gelation prior to UV exposure allow for control over hydrogel stiffness and swelling properties. GelMA solutions have a low viscosity at 37 °C, which is incompatible with most biofabrication approaches. However, incorporation of hyaluronic acid (HA) and/or co‐deposition with thermoplastics allows gelMA to be used in biofabrication processes. These attributes may allow engineered constructs to match the natural functional variations in cartilage mechanical and geometrical properties.magnified image
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Langer, R., & Vacanti, J. P. (1993) · Science · doi:10.1126/science.8493529 · Cited by 9,893
FARNDALE, R., BUTTLE, D., & BARRETT, A. (1986) · Biochimica et Biophysica Acta (BBA) - General Subjects · doi:10.1016/0304-4165(86)90306-5 · Cited by 3,312
Cell-laden microengineered gelatin methacrylate hydrogels
Nichol, J. W., Koshy, S. T., Bae, H., Hwang, C. M., Yamanlar, S., & Khademhosseini, A. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.03.064 · Cited by 2,377
Structural and Rheological Properties of Methacrylamide Modified Gelatin Hydrogels
Van Den Bulcke, A. I., Bogdanov, B., De Rooze, N., Schacht, E. H., Cornelissen, M., & Berghmans, H. (2000) · Biomacromolecules · doi:10.1021/bm990017d · Cited by 1,536
Organ printing: computer-aided jet-based 3D tissue engineering
Mironov, V., Boland, T., Trusk, T., Forgacs, G., & Markwald, R. R. (2003) · Trends in Biotechnology · doi:10.1016/s0167-7799(03)00033-7 · Cited by 1,276
Additive manufacturing of tissues and organs
Melchels, F. P. W., Domingos, M. A. N., Klein, T. J., Malda, J., Bartolo, P. J., & Hutmacher, D. W. (2012) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2011.11.007 · Cited by 1,213
Self-citationBryant, S. J., & Anseth, K. S. (2002) · Journal of Biomedical Materials Research · doi:10.1002/jbm.1217 · Cited by 845
Laser assisted bioprinting of engineered tissue with high cell density and microscale organization
Guillotin, B., Souquet, A., Catros, S., Duocastella, M., Pippenger, B., Bellance, S., Bareille, R., Rémy, M., Bordenave, L., Amédée, J., et al. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.05.055 · Cited by 832
Application of inkjet printing to tissue engineering
Boland, T., Xu, T., Damon, B., & Cui, X. (2006) · Biotechnology Journal · doi:10.1002/biot.200600081 · Cited by 783
Depth‐dependent confined compression modulus of full‐thickness bovine articular cartilage
Schinagl, R. M., Gurskis, D., Chen, A. C., & Sah, R. L. (1997) · Journal of Orthopaedic Research · doi:10.1002/jor.1100150404 · Cited by 646
Cited by
3D bioprinting of tissues and organs
Murphy, S. V., & Atala, A. (2014) · Nature Biotechnology · doi:10.1038/nbt.2958 · Cited by 7,034
Synthesis, properties, and biomedical applications of gelatin methacryloyl (GelMA) hydrogels
Yue, K., Trujillo-de Santiago, G., Alvarez, M. M., Tamayol, A., Annabi, N., & Khademhosseini, A. (2015) · Biomaterials · doi:10.1016/j.biomaterials.2015.08.045 · Cited by 3,146
Advances in engineering hydrogels
Zhang, Y. S., & Khademhosseini, A. (2017) · Science · doi:10.1126/science.aaf3627 · Cited by 2,908
25th Anniversary Article: Engineering Hydrogels for Biofabrication
Malda, J., Visser, J., Melchels, F. P., Jüngst, T., Hennink, W. E., Dhert, W. J. A., Groll, J., & Hutmacher, D. W. (2013) · Advanced Materials · doi:10.1002/adma.201302042 · Cited by 1,901
Self-citationBioinks for 3D bioprinting: an overview
Gungor-Ozkerim, P. S., Inci, I., Zhang, Y. S., Khademhosseini, A., & Dokmeci, M. R. (2018) · Biomaterials Science · doi:10.1039/c7bm00765e · Cited by 1,428
Printability and shape fidelity of bioinks in 3D bioprinting
Schwab, A., Levato, R., D’Este, M., Piluso, S., Eglin, D., & Malda, J. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00084 · Cited by 1,359
Self-citationProgress in 3D bioprinting technology for tissue/organ regenerative engineering
Matai, I., Kaur, G., Seyedsalehi, A., McClinton, A., & Laurencin, C. T. (2020) · Biomaterials · doi:10.1016/j.biomaterials.2019.119536 · Cited by 1,156
The bioink: A comprehensive review on bioprintable materials
Hospodiuk, M., Dey, M., Sosnoski, D., & Ozbolat, I. T. (2017) · Biotechnology Advances · doi:10.1016/j.biotechadv.2016.12.006 · Cited by 1,118
Bioink properties before, during and after 3D bioprinting
Hölzl, K., Lin, S., Tytgat, L., Van Vlierberghe, S., Gu, L., & Ovsianikov, A. (2016) · Biofabrication · doi:10.1088/1758-5090/8/3/032002 · Cited by 1,070
Billiet, T., Gevaert, E., De Schryver, T., Cornelissen, M., & Dubruel, P. (2014) · Biomaterials · doi:10.1016/j.biomaterials.2013.09.078 · Cited by 1,015
Paxton, N., Smolan, W., Böck, T., Melchels, F., Groll, J., & Jungst, T. (2017) · Biofabrication · doi:10.1088/1758-5090/aa8dd8 · Cited by 950
Self-citationLoessner, D., Meinert, C., Kaemmerer, E., Martine, L. C., Yue, K., Levett, P. A., Klein, T. J., Melchels, F. P. W., Khademhosseini, A., & Hutmacher, D. W. (2016) · Nature Protocols · doi:10.1038/nprot.2016.037 · Cited by 868
Self-citation3D printing of hydrogels: Rational design strategies and emerging biomedical applications
Li, J., Wu, C., Chu, P. K., & Gelinsky, M. (2020) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2020.100543 · Cited by 862
Gelatin-Methacryloyl Hydrogels: Towards Biofabrication-Based Tissue Repair
Klotz, B. J., Gawlitta, D., Rosenberg, A. J. W. P., Malda, J., & Melchels, F. P. W. (2016) · Trends in Biotechnology · doi:10.1016/j.tibtech.2016.01.002 · Cited by 846
Self-citationReinforcement of hydrogels using three-dimensionally printed microfibres
Visser, J., Melchels, F. P. W., Jeon, J. E., van Bussel, E. M., Kimpton, L. S., Byrne, H. M., Dhert, W. J. A., Dalton, P. D., Hutmacher, D. W., & Malda, J. (2015) · Nature Communications · doi:10.1038/ncomms7933 · Cited by 718
Self-citationStrategies and Molecular Design Criteria for 3D Printable Hydrogels
Jungst, T., Smolan, W., Schacht, K., Scheibel, T., & Groll, J. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.5b00303 · Cited by 712
3D Bioprinting for Tissue and Organ Fabrication
Zhang, Y. S., Yue, K., Aleman, J., Mollazadeh-Moghaddam, K., Bakht, S. M., Yang, J., Jia, W., Dell’Erba, V., Assawes, P., Shin, S. R., et al. (2017) · Annals of Biomedical Engineering · doi:10.1007/s10439-016-1612-8 · Cited by 682
Bioactive Nanoengineered Hydrogels for Bone Tissue Engineering: A Growth-Factor-Free Approach
Xavier, J. R., Thakur, T., Desai, P., Jaiswal, M. K., Sears, N., Cosgriff-Hernandez, E., Kaunas, R., & Gaharwar, A. K. (2015) · ACS Nano · doi:10.1021/nn507488s · Cited by 653
Cell-laden hydrogels for osteochondral and cartilage tissue engineering
Yang, J., Zhang, Y. S., Yue, K., & Khademhosseini, A. (2017) · Acta Biomaterialia · doi:10.1016/j.actbio.2017.01.036 · Cited by 652
Biofabrication: A Guide to Technology and Terminology
Moroni, L., Boland, T., Burdick, J. A., De Maria, C., Derby, B., Forgacs, G., Groll, J., Li, Q., Malda, J., Mironov, V. A., et al. (2018) · Trends in Biotechnology · doi:10.1016/j.tibtech.2017.10.015 · Cited by 636
Self-citation3D Printing of Shear-Thinning Hyaluronic Acid Hydrogels with Secondary Cross-Linking
Ouyang, L., Highley, C. B., Rodell, C. B., Sun, W., & Burdick, J. A. (2016) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.6b00158 · Cited by 607
Yin, J., Yan, M., Wang, Y., Fu, J., & Suo, H. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b16059 · Cited by 598
A Multimaterial Bioink Method for 3D Printing Tunable, Cell‐Compatible Hydrogels
Rutz, A. L., Hyland, K. E., Jakus, A. E., Burghardt, W. R., & Shah, R. N. (2015) · Advanced Materials · doi:10.1002/adma.201405076 · Cited by 572
Opportunities and challenges of translational 3D bioprinting
Murphy, S. V., De Coppi, P., & Atala, A. (2019) · Nature Biomedical Engineering · doi:10.1038/s41551-019-0471-7 · Cited by 563
Engineering alginate as bioink for bioprinting
Jia, J., Richards, D. J., Pollard, S., Tan, Y., Rodriguez, J., Visconti, R. P., Trusk, T. C., Yost, M. J., Yao, H., Markwald, R. R., et al. (2014) · Acta Biomaterialia · doi:10.1016/j.actbio.2014.06.034 · Cited by 549
Unagolla, J. M., & Jayasuriya, A. C. (2020) · Applied Materials Today · doi:10.1016/j.apmt.2019.100479 · Cited by 544
Vedadghavami, A., Minooei, F., Mohammadi, M. H., Khetani, S., Rezaei Kolahchi, A., Mashayekhan, S., & Sanati-Nezhad, A. (2017) · Acta Biomaterialia · doi:10.1016/j.actbio.2017.07.028 · Cited by 540
Processing of collagen based biomaterials and the resulting materials properties
Meyer, M. (2019) · BioMedical Engineering OnLine · doi:10.1186/s12938-019-0647-0 · Cited by 539
Laronda, M. M., Rutz, A. L., Xiao, S., Whelan, K. A., Duncan, F. E., Roth, E. W., Woodruff, T. K., & Shah, R. N. (2017) · Nature Communications · doi:10.1038/ncomms15261 · Cited by 527
Ouyang, L., Highley, C. B., Sun, W., & Burdick, J. A. (2017) · Advanced Materials · doi:10.1002/adma.201604983 · Cited by 524
Extrusion Bioprinting of Shear‐Thinning Gelatin Methacryloyl Bioinks
Liu, W., Heinrich, M. A., Zhou, Y., Akpek, A., Hu, N., Liu, X., Guan, X., Zhong, Z., Jin, X., Khademhosseini, A., et al. (2017) · Advanced Healthcare Materials · doi:10.1002/adhm.201601451 · Cited by 503
Thermoresponsive hydrogels in biomedical applications
Klouda, L. (2015) · European Journal of Pharmaceutics and Biopharmaceutics · doi:10.1016/j.ejpb.2015.05.017 · Cited by 491
Zhu, M., Wang, Y., Ferracci, G., Zheng, J., Cho, N.-J., & Lee, B. H. (2019) · Scientific Reports · doi:10.1038/s41598-019-42186-x · Cited by 483
From Shape to Function: The Next Step in Bioprinting
Levato, R., Jungst, T., Scheuring, R. G., Blunk, T., Groll, J., & Malda, J. (2020) · Advanced Materials · doi:10.1002/adma.201906423 · Cited by 476
Self-citationPrecise Tuning of Facile One-Pot Gelatin Methacryloyl (GelMA) Synthesis
Shirahama, H., Lee, B. H., Tan, L. P., & Cho, N.-J. (2016) · Scientific Reports · doi:10.1038/srep31036 · Cited by 473
Current Status of Bioinks for Micro-Extrusion-Based 3D Bioprinting
Panwar, A., & Tan, L. (2016) · Molecules · doi:10.3390/molecules21060685 · Cited by 472
Additive Manufacturing of Biomaterials, Tissues, and Organs
Zadpoor, A. A., & Malda, J. (2017) · Annals of Biomedical Engineering · doi:10.1007/s10439-016-1719-y · Cited by 462
Self-citationSun, M., Sun, X., Wang, Z., Guo, S., Yu, G., & Yang, H. (2018) · Polymers · doi:10.3390/polym10111290 · Cited by 449
Assessing bioink shape fidelity to aid material development in 3D bioprinting
Ribeiro, A., Blokzijl, M. M., Levato, R., Visser, C. W., Castilho, M., Hennink, W. E., Vermonden, T., & Malda, J. (2017) · Biofabrication · doi:10.1088/1758-5090/aa90e2 · Cited by 448
Self-citationMultifunctional GelMA platforms with nanomaterials for advanced tissue therapeutics
Kurian, A. G., Singh, R. K., Patel, K. D., Lee, J.-H., & Kim, H.-W. (2022) · Bioactive Materials · doi:10.1016/j.bioactmat.2021.06.027 · Cited by 444
3D Bioprinting: from Benches to Translational Applications
Heinrich, M. A., Liu, W., Jimenez, A., Yang, J., Akpek, A., Liu, X., Pi, Q., Mu, X., Hu, N., Schiffelers, R. M., et al. (2019) · Small · doi:10.1002/smll.201805510 · Cited by 437
Assessment methodologies for extrusion-based bioink printability
Gillispie, G., Prim, P., Copus, J., Fisher, J., Mikos, A. G., Yoo, J. J., Atala, A., & Lee, S. J. (2020) · Biofabrication · doi:10.1088/1758-5090/ab6f0d · Cited by 426
Pepelanova, I., Kruppa, K., Scheper, T., & Lavrentieva, A. (2018) · Bioengineering · doi:10.3390/bioengineering5030055 · Cited by 416
Fundamentals and Applications of Photo-Cross-Linking in Bioprinting
Lim, K. S., Galarraga, J. H., Cui, X., Lindberg, G. C. J., Burdick, J. A., & Woodfield, T. B. F. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00812 · Cited by 416
Preparation of Alginate-Based Biomaterials and Their Applications in Biomedicine
Zhang, H., Cheng, J., & Ao, Q. (2021) · Marine Drugs · doi:10.3390/md19050264 · Cited by 416
Hydrogel scaffolds for differentiation of adipose-derived stem cells
Huang, Q., Zou, Y., Arno, M. C., Chen, S., Wang, T., Gao, J., Dove, A. P., & Du, J. (2017) · Chemical Society Reviews · doi:10.1039/c6cs00052e · Cited by 400
Crosslinking Strategies for 3D Bioprinting of Polymeric Hydrogels
GhavamiNejad, A., Ashammakhi, N., Wu, X. Y., & Khademhosseini, A. (2020) · Small · doi:10.1002/smll.202002931 · Cited by 400
Biofabrication of tissue constructs by 3D bioprinting of cell-laden microcarriers
Levato, R., Visser, J., Planell, J. A., Engel, E., Malda, J., & Mateos-Timoneda, M. A. (2014) · Biofabrication · doi:10.1088/1758-5082/6/3/035020 · Cited by 380
Self-citationHydrogels for tissue engineering and regenerative medicine
Hunt, J. A., Chen, R., van Veen, T., & Bryan, N. (2014) · J. Mater. Chem. B · doi:10.1039/c4tb00775a · Cited by 377
Levett, P. A., Melchels, F. P. W., Schrobback, K., Hutmacher, D. W., Malda, J., & Klein, T. J. (2014) · Acta Biomaterialia · doi:10.1016/j.actbio.2013.10.005 · Cited by 375
Self-citationShear-Thinning and Thermo-Reversible Nanoengineered Inks for 3D Bioprinting
Wilson, S. A., Cross, L. M., Peak, C. W., & Gaharwar, A. K. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b13602 · Cited by 369
Biomimetic 3D tissue printing for soft tissue regeneration
Pati, F., Ha, D.-H., Jang, J., Han, H. H., Rhie, J.-W., & Cho, D.-W. (2015) · Biomaterials · doi:10.1016/j.biomaterials.2015.05.043 · Cited by 368
Askari, M., Afzali Naniz, M., Kouhi, M., Saberi, A., Zolfagharian, A., & Bodaghi, M. (2021) · Biomaterials Science · doi:10.1039/d0bm00973c · Cited by 369
Xiao, S., Zhao, T., Wang, J., Wang, C., Du, J., Ying, L., Lin, J., Zhang, C., Hu, W., Wang, L., et al. (2019) · Stem Cell Reviews and Reports · doi:10.1007/s12015-019-09893-4 · Cited by 363
New Visible-Light Photoinitiating System for Improved Print Fidelity in Gelatin-Based Bioinks
Lim, K. S., Schon, B. S., Mekhileri, N. V., Brown, G. C. J., Chia, C. M., Prabakar, S., Hooper, G. J., & Woodfield, T. B. F. (2016) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.6b00149 · Cited by 362
A Review of Three-Dimensional Printing in Tissue Engineering
Sears, N. A., Seshadri, D. R., Dhavalikar, P. S., & Cosgriff-Hernandez, E. (2016) · Tissue Engineering Part B: Reviews · doi:10.1089/ten.teb.2015.0464 · Cited by 360
Mouser, V. H. M., Melchels, F. P. W., Visser, J., Dhert, W. J. A., Gawlitta, D., & Malda, J. (2016) · Biofabrication · doi:10.1088/1758-5090/8/3/035003 · Cited by 359
Self-citationBioprinting and its applications in tissue engineering and regenerative medicine
Aljohani, W., Ullah, M. W., Zhang, X., & Yang, G. (2018) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2017.08.171 · Cited by 335
3D Bioprinting for Cartilage and Osteochondral Tissue Engineering
Daly, A. C., Freeman, F. E., Gonzalez‐Fernandez, T., Critchley, S. E., Nulty, J., & Kelly, D. J. (2017) · Advanced Healthcare Materials · doi:10.1002/adhm.201700298 · Cited by 334
Gelatin-Based Materials in Ocular Tissue Engineering
Rose, J., Pacelli, S., Haj, A., Dua, H., Hopkinson, A., White, L., & Rose, F. (2014) · Materials · doi:10.3390/ma7043106 · Cited by 327
Gelatin-Based Hydrogels for Organ 3D Bioprinting
Wang, X., Ao, Q., Tian, X., Fan, J., Tong, H., Hou, W., & Bai, S. (2017) · Polymers · doi:10.3390/polym9090401 · Cited by 315
In situ handheld three‐dimensional bioprinting for cartilage regeneration
Di Bella, C., Duchi, S., O'Connell, C. D., Blanchard, R., Augustine, C., Yue, Z., Thompson, F., Richards, C., Beirne, S., Onofrillo, C., et al. (2018) · Journal of Tissue Engineering and Regenerative Medicine · doi:10.1002/term.2476 · Cited by 313
Biofabrication of multi-material anatomically shaped tissue constructs
Visser, J., Peters, B., Burger, T. J., Boomstra, J., Dhert, W. J. A., Melchels, F. P. W., & Malda, J. (2013) · Biofabrication · doi:10.1088/1758-5082/5/3/035007 · Cited by 313
Self-citationDesign and Printing Strategies in 3D Bioprinting of Cell‐Hydrogels: A Review
Lee, J. M., & Yeong, W. Y. (2016) · Advanced Healthcare Materials · doi:10.1002/adhm.201600435 · Cited by 310
Recent advances in hydrogels for cartilage tissue engineering
Department of Bioengineering, U. O. P., Vega, S., Kwon, M., & Burdick, J. (2017) · European Cells and Materials · doi:10.22203/ecm.v033a05 · Cited by 307
Advances in additive manufacturing for bone tissue engineering scaffolds
Moreno Madrid, A. P., Vrech, S. M., Sanchez, M. A., & Rodriguez, A. P. (2019) · Materials Science and Engineering: C · doi:10.1016/j.msec.2019.03.037 · Cited by 307
Yi, B., Xu, Q., & Liu, W. (2022) · Bioactive Materials · doi:10.1016/j.bioactmat.2021.12.005 · Cited by 304
3D bioprinting for skin tissue engineering: Current status and perspectives
Weng, T., Zhang, W., Xia, Y., Wu, P., Yang, M., Jin, R., Xia, S., Wang, J., You, C., Han, C., et al. (2021) · Journal of Tissue Engineering · doi:10.1177/20417314211028574 · Cited by 303
Bio-resin for high resolution lithography-based biofabrication of complex cell-laden constructs
Lim, K. S., Levato, R., Costa, P. F., Castilho, M. D., Alcala-Orozco, C. R., van Dorenmalen, K. M. A., Melchels, F. P. W., Gawlitta, D., Hooper, G. J., Malda, J., et al. (2018) · Biofabrication · doi:10.1088/1758-5090/aac00c · Cited by 296
Self-citationKesti, M., Müller, M., Becher, J., Schnabelrauch, M., D’Este, M., Eglin, D., & Zenobi-Wong, M. (2015) · Acta Biomaterialia · doi:10.1016/j.actbio.2014.09.033 · Cited by 294
Print Me An Organ! Why We Are Not There Yet
Ng, W. L., Chua, C. K., & Shen, Y.-F. (2019) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2019.101145 · Cited by 287
Martínez Ávila, H., Schwarz, S., Rotter, N., & Gatenholm, P. (2016) · Bioprinting · doi:10.1016/j.bprint.2016.08.003 · Cited by 282
O’Connell, C. D., Di Bella, C., Thompson, F., Augustine, C., Beirne, S., Cornock, R., Richards, C. J., Chung, J., Gambhir, S., Yue, Z., et al. (2016) · Biofabrication · doi:10.1088/1758-5090/8/1/015019 · Cited by 274
Fabrication and Applications of Micro/Nanostructured Devices for Tissue Engineering
Limongi, T., Tirinato, L., Pagliari, F., Giugni, A., Allione, M., Perozziello, G., Candeloro, P., & Di Fabrizio, E. (2017) · Nano-Micro Letters · doi:10.1007/s40820-016-0103-7 · Cited by 269
Repair of Damaged Articular Cartilage: Current Approaches and Future Directions
Medvedeva, E. V., Grebenik, E. A., Gornostaeva, S. N., Telpuhov, V. I., Lychagin, A. V., Timashev, P. S., & Chagin, A. S. (2018) · International Journal of Molecular Sciences · doi:10.3390/ijms19082366 · Cited by 266
3D Bioprinting of Human Tissues: Biofabrication, Bioinks, and Bioreactors
Zhang, J., Wehrle, E., Rubert, M., & Müller, R. (2021) · International Journal of Molecular Sciences · doi:10.3390/ijms22083971 · Cited by 257
Physical and Chemical Factors Influencing the Printability of Hydrogel-based Extrusion Bioinks
Lee, S. C., Gillispie, G., Prim, P., & Lee, S. J. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00015 · Cited by 255
3D bioprinting of BM-MSCs-loaded ECM biomimetic hydrogels for in vitro neocartilage formation
Costantini, M., Idaszek, J., Szöke, K., Jaroszewicz, J., Dentini, M., Barbetta, A., Brinchmann, J. E., & Święszkowski, W. (2016) · Biofabrication · doi:10.1088/1758-5090/8/3/035002 · Cited by 250
Beck, E. C., Barragan, M., Tadros, M. H., Gehrke, S. H., & Detamore, M. S. (2016) · Acta Biomaterialia · doi:10.1016/j.actbio.2016.04.019 · Cited by 222
“GelMA is widely used in the field of tissue engineering for its low cost, its abundant cell adhesion sites, and for its ability to support chondrocyte differentiation [28, 41].”
BackgroundHandheld co-axial bioprinting: application to in situ surgical cartilage repair
Duchi, S., Onofrillo, C., O’Connell, C. D., Blanchard, R., Augustine, C., Quigley, A. F., Kapsa, R. M. I., Pivonka, P., Wallace, G., Di Bella, C., et al. (2017) · Scientific Reports · doi:10.1038/s41598-017-05699-x · Cited by 219
Gelatine Methacrylamide-Based Hydrogels: An Alternative Three-Dimensional Cancer Cell Culture System
Kaemmerer, E., Melchels, F. P. W., Holzapfel, B. M., Meckel, T., Hutmacher, D. W., & Loessner, D. (2014) · Acta Biomaterialia · doi:10.1016/j.actbio.2014.02.035 · Cited by 219
Self-citationEmerging tumor spheroids technologies for 3D in vitro cancer modeling
Rodrigues, T., Kundu, B., Silva-Correia, J., Kundu, S. C., Oliveira, J. M., Reis, R. L., & Correlo, V. M. (2018) · Pharmacology & Therapeutics · doi:10.1016/j.pharmthera.2017.10.018 · Cited by 178
Direct 3D‐Bioprinting of hiPSC‐Derived Cardiomyocytes to Generate Functional Cardiac Tissues
Esser, T. U., Anspach, A., Muenzebrock, K. A., Kah, D., Schrüfer, S., Schenk, J., Heinze, K. G., Schubert, D. W., Fabry, B., & Engel, F. B. (2023) · Advanced Materials · doi:10.1002/adma.202305911 · Cited by 75
Current advances in three-dimensional tissue/organ printing
Park, J. H., Jang, J., Lee, J.-S., & Cho, D.-W. (2016) · Tissue Engineering and Regenerative Medicine · doi:10.1007/s13770-016-8111-8 · Cited by 51
Blokland, K. E. C., Nizamoglu, M., Habibie, H., Borghuis, T., Schuliga, M., Melgert, B. N., Knight, D. A., Brandsma, C.-A., Pouwels, S. D., & Burgess, J. K. (2022) · Frontiers in Pharmacology · doi:10.3389/fphar.2022.989169 · Cited by 45
Metadata
- Authors
- Schuurman, W., Levett, P. A., Pot, M. W., van Weeren, P. R., Dhert, W. J. A., Hutmacher, D. W., Melchels, F. P. W., Klein, T. J., & Malda, J.
- Venue
- Macromolecular Bioscience
- Publisher
- Wiley
- Published
- 2013-02-18
- Volume
- 13
- Issue
- 5
- Pages
- 551-561
- ISSN
- 1616-5187 (ISSN-L)
- 1616-5195
- OpenAlex
- W2142162781
- Cited by
- 790
- References
- 46
- FWCI
- 17.57
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.