3D bioactive composite scaffolds for bone tissue engineering
Open accessThe DOI matches its Crossref record; 400 of the 400 references it cites were found in a registry or an index.
Abstract
Bone is the second most commonly transplanted tissue worldwide, with over four million operations using bone grafts or bone substitute materials annually to treat bone defects. However, significant limitations affect current treatment options and clinical demand for bone grafts continues to rise due to conditions such as trauma, cancer, infection and arthritis. Developing bioactive three-dimensional (3D) scaffolds to support bone regeneration has therefore become a key area of focus within bone tissue engineering (BTE). A variety of materials and manufacturing methods including 3D printing have been used to create novel alternatives to traditional bone grafts. However, individual groups of materials including polymers, ceramics and hydrogels have been unable to fully replicate the properties of bone when used alone. Favourable material properties can be combined and bioactivity improved when groups of materials are used together in composite 3D scaffolds. This review will therefore consider the ideal properties of bioactive composite 3D scaffolds and examine recent use of polymers, hydrogels, metals, ceramics and bio-glasses in BTE. Scaffold fabrication methodology, mechanical performance, biocompatibility, bioactivity, and potential clinical translations will be discussed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
1 retracted
Xu, S., Xu, S., Zhou, P., Cheng, X., Xie, Y., Liang, C., & Li, C. (2013) · International Journal of Nanomedicine · doi:10.2147/ijn.s50685 · Cited by 146
RetractedMussel-inspired surface chemistry for multifunctional coatings
Lee, H., Dellatore, S. M., Miller, W. M., & Messersmith, P. B. (2007) · Science · doi:10.1126/science.1147241 · Cited by 10,965 · cited 1×
“BMP, collagen, apatite and polydopamine on scaffold surfaces [121,282,303,306,463].”
BackgroundProjections of Primary and Revision Hip and Knee Arthroplasty in the United States from 2005 to 2030
Kurtz, S., Ong, K., Lau, E., Mowat, F., & Halpern, M. (2007) · The Journal of Bone and Joint Surgery-American Volume · doi:10.2106/00004623-200704000-00012 · Cited by 8,698
A review on polymer nanofibers by electrospinning and their applications in nanocomposites
Huang, Z.-M., Zhang, Y.-Z., Kotaki, M., & Ramakrishna, S. (2003) · Composites Science and Technology · doi:10.1016/s0266-3538(03)00178-7 · Cited by 7,556
3D bioprinting of tissues and organs
Murphy, S. V., & Atala, A. (2014) · Nature Biotechnology · doi:10.1038/nbt.2958 · Cited by 7,034
Porosity of 3D biomaterial scaffolds and osteogenesis
Karageorgiou, V., & Kaplan, D. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2005.02.002 · Cited by 6,622
Hydrogel: Preparation, characterization, and applications: A review
Ahmed, E. M. (2015) · Journal of Advanced Research · doi:10.1016/j.jare.2013.07.006 · Cited by 5,800
Scaffolds in tissue engineering bone and cartilage
Hutmacher, D. W. (2000) · Biomaterials · doi:10.1016/s0142-9612(00)00121-6 · Cited by 4,994
Magnesium and its alloys as orthopedic biomaterials: A review
Staiger, M. P., Pietak, A. M., Huadmai, J., & Dias, G. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2005.10.003 · Cited by 4,452
Biodegradable polymers as biomaterials
Nair, L. S., & Laurencin, C. T. (2007) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2007.05.017 · Cited by 4,416
Cited by
Recent advances in biomaterials for 3D scaffolds: A review
Nikolova, M. P., & Chavali, M. S. (2019) · Bioactive Materials · doi:10.1016/j.bioactmat.2019.10.005 · Cited by 907
“In general, most conventional techniques for scaffold production are incapable of creating complex scaffolds with precisely controlled microarchitecture and properties [43].”
BackgroundScaffold Fabrication Technologies and Structure/Function Properties in Bone Tissue Engineering
Collins, M. N., Ren, G., Young, K., Pina, S., Reis, R. L., & Oliveira, J. M. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202010609 · Cited by 867
Porous scaffolds for bone regeneration
Abbasi, N., Hamlet, S., Love, R. M., & Nguyen, N.-T. (2020) · Journal of Science: Advanced Materials and Devices · doi:10.1016/j.jsamd.2020.01.007 · Cited by 858
Nanocomposite scaffolds for accelerating chronic wound healing by enhancing angiogenesis
Nosrati, H., Aramideh Khouy, R., Nosrati, A., Khodaei, M., Banitalebi-Dehkordi, M., Ashrafi-Dehkordi, K., Sanami, S., & Alizadeh, Z. (2021) · Journal of Nanobiotechnology · doi:10.1186/s12951-020-00755-7 · Cited by 720
Fabrication of Scaffolds for Bone-Tissue Regeneration
Chocholata, P., Kulda, V., & Babuska, V. (2019) · Materials · doi:10.3390/ma12040568 · Cited by 603
Recent advances in smart stimuli-responsive biomaterials for bone therapeutics and regeneration
Wei, H., Cui, J., Lin, K., Xie, J., & Wang, X. (2022) · Bone Research · doi:10.1038/s41413-021-00180-y · Cited by 471
The application of hyaluronic acid in bone regeneration
Zhai, P., Peng, X., Li, B., Liu, Y., Sun, H., & Li, X. (2020) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2019.10.169 · Cited by 438
Self-citation3D Bioprinting: from Benches to Translational Applications
Heinrich, M. A., Liu, W., Jimenez, A., Yang, J., Akpek, A., Liu, X., Pi, Q., Mu, X., Hu, N., Schiffelers, R. M., et al. (2019) · Small · doi:10.1002/smll.201805510 · Cited by 437
Askari, M., Afzali Naniz, M., Kouhi, M., Saberi, A., Zolfagharian, A., & Bodaghi, M. (2021) · Biomaterials Science · doi:10.1039/d0bm00973c · Cited by 369
The role of additive manufacturing for biomedical applications: A critical review
Kumar, R., Kumar, M., & Chohan, J. S. (2021) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2021.02.022 · Cited by 367
Unraveling of Advances in 3D-Printed Polymer-Based Bone Scaffolds
Xu, Y., Zhang, F., Zhai, W., Cheng, S., Li, J., & Wang, Y. (2022) · Polymers · doi:10.3390/polym14030566 · Cited by 349
Pharmaceutical electrospinning and 3D printing scaffold design for bone regeneration
Wang, Z., Wang, Y., Yan, J., Zhang, K., Lin, F., Xiang, L., Deng, L., Guan, Z., Cui, W., & Zhang, H. (2021) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2021.05.007 · Cited by 344
Natural and Synthetic Polymers for Bone Scaffolds Optimization
Donnaloja, F., Jacchetti, E., Soncini, M., & Raimondi, M. T. (2020) · Polymers · doi:10.3390/polym12040905 · Cited by 324
Cellulose-based composite scaffolds for bone tissue engineering and localized drug delivery
Janmohammadi, M., Nazemi, Z., Salehi, A. O. M., Seyfoori, A., John, J. V., Nourbakhsh, M. S., & Akbari, M. (2023) · Bioactive Materials · doi:10.1016/j.bioactmat.2022.05.018 · Cited by 323
Orthopedic implants and devices for bone fractures and defects: Past, present and perspective
Kim, T., See, C. W., Li, X., & Zhu, D. (2020) · Engineered Regeneration · doi:10.1016/j.engreg.2020.05.003 · Cited by 307
Campbell, S. B., Wu, Q., Yazbeck, J., Liu, C., Okhovatian, S., & Radisic, M. (2021) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.0c00640 · Cited by 297
Bioinspired mineralized collagen scaffolds for bone tissue engineering
Li, Z., Du, T., Ruan, C., & Niu, X. (2021) · Bioactive Materials · doi:10.1016/j.bioactmat.2020.11.004 · Cited by 272
Szymczyk-Ziółkowska, P., Łabowska, M. B., Detyna, J., Michalak, I., & Gruber, P. (2020) · Biocybernetics and Biomedical Engineering · doi:10.1016/j.bbe.2020.01.015 · Cited by 266
An, D., Fu, J., Zhang, B., Xie, N., Nie, G., Ågren, H., Qiu, M., & Zhang, H. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202101625 · Cited by 261
Adult Stem Cells for Bone Regeneration and Repair
Iaquinta, M. R., Mazzoni, E., Bononi, I., Rotondo, J. C., Mazziotta, C., Montesi, M., Sprio, S., Tampieri, A., Tognon, M., & Martini, F. (2019) · Frontiers in Cell and Developmental Biology · doi:10.3389/fcell.2019.00268 · Cited by 259
Advances in Growth Factor Delivery for Bone Tissue Engineering
Oliveira, É. R., Nie, L., Podstawczyk, D., Allahbakhsh, A., Ratnayake, J., Brasil, D. L., & Shavandi, A. (2021) · International Journal of Molecular Sciences · doi:10.3390/ijms22020903 · Cited by 258
Pita-López, M. L., Fletes-Vargas, G., Espinosa-Andrews, H., & Rodríguez-Rodríguez, R. (2021) · European Polymer Journal · doi:10.1016/j.eurpolymj.2020.110176 · Cited by 256
Current Insights into Collagen Type I
Naomi, R., Ridzuan, P. M., & Bahari, H. (2021) · Polymers · doi:10.3390/polym13162642 · Cited by 254
3D printing applications in bone tissue engineering
Haleem, A., Javaid, M., Khan, R. H., & Suman, R. (2020) · Journal of Clinical Orthopaedics and Trauma · doi:10.1016/j.jcot.2019.12.002 · Cited by 253
Biomaterials / bioinks and extrusion bioprinting
Chen, X. B., Fazel Anvari-Yazdi, A., Duan, X., Zimmerling, A., Gharraei, R., Sharma, N. K., Sweilem, S., & Ning, L. (2023) · Bioactive Materials · doi:10.1016/j.bioactmat.2023.06.006 · Cited by 244
Advancing bioinks for 3D bioprinting using reactive fillers: a review
Heid, S., & Boccaccini, A. R. (2020) · Acta Biomaterialia · doi:10.1016/j.actbio.2020.06.040 · Cited by 224
The immune reaction and degradation fate of scaffold in cartilage/bone tissue engineering
Yang, D., Xiao, J., Wang, B., Li, L., Kong, X., & Liao, J. (2019) · Materials Science and Engineering: C · doi:10.1016/j.msec.2019.109927 · Cited by 192
Research Progress of Shape Memory Polymer and 4D Printing in Biomedical Application
Zhao, W., Yue, C., Liu, L., Liu, Y., & Leng, J. (2023) · Advanced Healthcare Materials · doi:10.1002/adhm.202201975 · Cited by 183
Design, printing, and engineering of regenerative biomaterials for personalized bone healthcare
Jia, Z., Xu, X., Zhu, D., & Zheng, Y. (2023) · Progress in Materials Science · doi:10.1016/j.pmatsci.2023.101072 · Cited by 176
Farjaminejad, S., Farjaminejad, R., Hasani, M., Garcia-Godoy, F., Abdouss, M., Marya, A., Harsoputranto, A., & Jamilian, A. (2024) · Polymers · doi:10.3390/polym16233303 · Cited by 158
“Limitations Polymer-based scaffolds face significant These challenges include biodegradation, mechanical strength, cellular interactions, and scalability [1,67,70]. challenges in bone tissue engineering, limiting applicability.”
InfluentialBaptista, R., & Guedes, M. (2021) · Materials Science and Engineering: C · doi:10.1016/j.msec.2020.111528 · Cited by 157
Ebrahimi, Z., Irani, S., Ardeshirylajimi, A., & Seyedjafari, E. (2022) · Scientific Reports · doi:10.1038/s41598-022-15602-y · Cited by 141
Montalbano, G., Molino, G., Fiorilli, S., & Vitale-Brovarone, C. (2020) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2020.02.018 · Cited by 84
“The introduction of the extrusion-based 3D printing in bone tissue engineering has increased the precision and the repeatability of scaffold manufacturing, in addition to the overall process biocompatibility [17,18,20].”
BackgroundLiu, Y., Gu, J., & Fan, D. (2020) · Polymers · doi:10.3390/polym12010061 · Cited by 63
Wang, W., Wang, L., Zhang, B., Shang, S., Zhao, C., Zhang, W., Chen, J., Zhou, C., Zhou, H., & Feng, S. (2024) · Chemical Engineering Journal · doi:10.1016/j.cej.2024.149444 · Cited by 51
Biomaterials-Driven Sterile Inflammation
Chen, H., Agrawal, D. K., & Thankam, F. G. (2022) · Tissue Engineering Part B: Reviews · doi:10.1089/ten.teb.2020.0253 · Cited by 41
Lee, S. H., Jeon, S., Qu, X., Kang, M. S., Lee, J. H., Han, D.-W., & Hong, S. W. (2022) · Nano Convergence · doi:10.1186/s40580-022-00329-3 · Cited by 39
Azadi, S., Yazdanpanah, M. A., Afshari, A., Alahdad, N., Chegeni, S., Angaji, A., Rezayat, S. M., & Tavakol, S. (2024) · Journal of Tissue Engineering · doi:10.1177/20417314241303818 · Cited by 24
Advances in guided bone regeneration membranes: a comprehensive review of materials and techniques
Ali, M., Mohd Noor, S. N. F., Mohamad, H., Ullah, F., Javed, F., & Abdul Hamid, Z. A. (2024) · Biomedical Physics & Engineering Express · doi:10.1088/2057-1976/ad1e75 · Cited by 19
Faculty of Medicine and Health Technology, F.-3. T. U., Pitkänen, S., Paakinaho, K., Pihlman, H., Ahola, N., Hannula, M., Asikainen, S., Manninen, M., Morelius, M., Keränen, P., et al. (2019) · European Cells and Materials · doi:10.22203/ecm.v038a04 · Cited by 10
“, 2011) and highly porous, with a pore size larger than 250 μm to allow cell and tissue ingrowth (Mathieu et al., 2005; Turnbull et al., 2017; Zadpoor, 2015) and vascularisation (Rouwkema et al.”
BackgroundInfluentialSilk fibroin as adjuvant in the fabrication of mechanically stable fibrin biocomposites
El Maachi, I., Kyriakou, S., Rütten, S., Kopp, A., Köpf, M., Jockenhoevel, S., & Fernández-Colino, A. (2022) · Polymers · doi:10.3390/polym14112251 · Cited by 7
“Consequently, the pursuit of advanced scaffolds should focus on the selection of adequate materials as well as on the appropriate fabrication techniques to enable synergy between the different components and to match the needs of the target tissue [37].”
Background
Metadata
- Authors
- Turnbull, G., Clarke, J., Picard, F., Riches, P., Jia, L., Han, F., Li, B., & Shu, W.
- Venue
- Bioactive Materials
- Publisher
- Elsevier BV
- Published
- 2018-09
- Volume
- 3
- Issue
- 3
- Pages
- 278-314
- ISSN
- 2097-1192 (ISSN-L)
- 2452-199X
- OpenAlex
- W2774085282
- Cited by
- 1,332
- References
- 400
- FWCI
- 35.50
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.