The DOI matches its Crossref record; 400 of the 400 references it cites were found in a registry or an index.
3D bioactive composite scaffolds for bone tissue engineering
Open accessAbstract
Bone is the second most commonly transplanted tissue worldwide, with over four million operations using bone grafts or bone substitute materials annually to treat bone defects. However, significant limitations affect current treatment options and clinical demand for bone grafts continues to rise due to conditions such as trauma, cancer, infection and arthritis. Developing bioactive three-dimensional (3D) scaffolds to support bone regeneration has therefore become a key area of focus within bone tissue engineering (BTE). A variety of materials and manufacturing methods including 3D printing have been used to create novel alternatives to traditional bone grafts. However, individual groups of materials including polymers, ceramics and hydrogels have been unable to fully replicate the properties of bone when used alone. Favourable material properties can be combined and bioactivity improved when groups of materials are used together in composite 3D scaffolds. This review will therefore consider the ideal properties of bioactive composite 3D scaffolds and examine recent use of polymers, hydrogels, metals, ceramics and bio-glasses in BTE. Scaffold fabrication methodology, mechanical performance, biocompatibility, bioactivity, and potential clinical translations will be discussed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
1 retracted
Xu, S., Xu, S., Zhou, P., Cheng, X., Xie, Y., Liang, C., & Li, C. (2013) · International Journal of Nanomedicine · doi:10.2147/ijn.s50685 · Cited by 198
RetractedMussel-inspired surface chemistry for multifunctional coatings
Lee, H., Dellatore, S. M., Miller, W. M., & Messersmith, P. B. (2007) · Science · doi:10.1126/science.1147241 · Cited by 10,965 · cited 1×
“BMP, collagen, apatite and polydopamine on scaffold surfaces [121,282,303,306,463].”
BackgroundProjections of Primary and Revision Hip and Knee Arthroplasty in the United States from 2005 to 2030
Kurtz, S., Ong, K., Lau, E., Mowat, F., & Halpern, M. (2007) · The Journal of Bone and Joint Surgery-American Volume · doi:10.2106/00004623-200704000-00012 · Cited by 8,698
A review on polymer nanofibers by electrospinning and their applications in nanocomposites
Huang, Z.-M., Zhang, Y.-Z., Kotaki, M., & Ramakrishna, S. (2003) · Composites Science and Technology · doi:10.1016/s0266-3538(03)00178-7 · Cited by 7,556
3D bioprinting of tissues and organs
Murphy, S. V., & Atala, A. (2014) · Nature Biotechnology · doi:10.1038/nbt.2958 · Cited by 7,034
Porosity of 3D biomaterial scaffolds and osteogenesis
Karageorgiou, V., & Kaplan, D. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2005.02.002 · Cited by 6,622
Hydrogel: Preparation, characterization, and applications: A review
Ahmed, E. M. (2015) · Journal of Advanced Research · doi:10.1016/j.jare.2013.07.006 · Cited by 5,800
Scaffolds in tissue engineering bone and cartilage
Hutmacher, D. W. (2000) · Biomaterials · doi:10.1016/s0142-9612(00)00121-6 · Cited by 4,994
Magnesium and its alloys as orthopedic biomaterials: A review
Staiger, M. P., Pietak, A. M., Huadmai, J., & Dias, G. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2005.10.003 · Cited by 4,452
Biodegradable polymers as biomaterials
Nair, L. S., & Laurencin, C. T. (2007) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2007.05.017 · Cited by 4,416
The price of innovation: new estimates of drug development costs
DiMasi, J. A., Hansen, R. W., & Grabowski, H. G. (2003) · Journal of Health Economics · doi:10.1016/s0167-6296(02)00126-1 · Cited by 4,265
The return of a forgotten polymer—Polycaprolactone in the 21st century
Woodruff, M. A., & Hutmacher, D. W. (2010) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2010.04.002 · Cited by 4,033
Porous scaffold design for tissue engineering
Hollister, S. J. (2005) · Nature Materials · doi:10.1038/nmat1421 · Cited by 3,969
Biodegradable and bioactive porous polymer/inorganic composite scaffolds for bone tissue engineering
Rezwan, K., Chen, Q. Z., Blaker, J. J., & Boccaccini, A. R. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2006.01.039 · Cited by 3,839
Pierschbacher, M. D., & Ruoslahti, E. (1984) · Nature · doi:10.1038/309030a0 · Cited by 3,658
Bonding mechanisms at the interface of ceramic prosthetic materials
Hench, L. L., Splinter, R. J., Allen, W. C., & Greenlee, T. K. (1971) · Journal of Biomedical Materials Research · doi:10.1002/jbm.820050611 · Cited by 3,251
Third-Generation Biomedical Materials
Hench, L. L., & Polak, J. M. (2002) · Science · doi:10.1126/science.1067404 · Cited by 2,789
Synthetic biodegradable polymers as orthopedic devices
Middleton, J. C., & Tipton, A. J. (2000) · Biomaterials · doi:10.1016/s0142-9612(00)00101-0 · Cited by 2,741
Three-Dimensional Scaffolds for Tissue Engineering Applications: Role of Porosity and Pore Size
Loh, Q. L., & Choong, C. (2013) · Tissue Engineering Part B: Reviews · doi:10.1089/ten.teb.2012.0437 · Cited by 2,668
A 3D bioprinting system to produce human-scale tissue constructs with structural integrity
Kang, H.-W., Lee, S. J., Ko, I. K., Kengla, C., Yoo, J. J., & Atala, A. (2016) · Nature Biotechnology · doi:10.1038/nbt.3413 · Cited by 2,622
RGD modified polymers: biomaterials for stimulated cell adhesion and beyond
Hersel, U., Dahmen, C., & Kessler, H. (2003) · Biomaterials · doi:10.1016/s0142-9612(03)00343-0 · Cited by 2,582
Hench, L. L. (2006) · Journal of Materials Science: Materials in Medicine · doi:10.1007/s10856-006-0432-z · Cited by 2,505
Review of bioactive glass: From Hench to hybrids
Jones, J. R. (2013) · Acta Biomaterialia · doi:10.1016/j.actbio.2012.08.023 · Cited by 2,451
Electrospun nanofibrous structure: A novel scaffold for tissue engineering
Li, W., Laurencin, C. T., Caterson, E. J., Tuan, R. S., & Ko, F. K. (2002) · Journal of Biomedical Materials Research · doi:10.1002/jbm.10167 · Cited by 2,427
Bone Tissue Engineering: Recent Advances and Challenges
Amini, A. R., Laurencin, C. T., & Nukavarapu, S. P. (2012) · Critical Reviews in Biomedical Engineering · doi:10.1615/critrevbiomedeng.v40.i5.10 · Cited by 2,336
Electrospinning of Collagen Nanofibers
Matthews, J. A., Wnek, G. E., Simpson, D. G., & Bowlin, G. L. (2002) · Biomacromolecules · doi:10.1021/bm015533u · Cited by 2,251
Biomedical applications of biodegradable polymers
Ulery, B. D., Nair, L. S., & Laurencin, C. T. (2011) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.22259 · Cited by 2,206
Recent advances in bone tissue engineering scaffolds
Bose, S., Roy, M., & Bandyopadhyay, A. (2012) · Trends in Biotechnology · doi:10.1016/j.tibtech.2012.07.005 · Cited by 2,206
Properties of Osteoconductive Biomaterials: Calcium Phosphates
LeGeros, R. Z. (2002) · Clinical Orthopaedics and Related Research · doi:10.1097/00003086-200202000-00009 · Cited by 1,987
Novel bioactive materials with different mechanical properties
Kokubo, T., Kim, H.-M., & Kawashita, M. (2003) · Biomaterials · doi:10.1016/s0142-9612(03)00044-9 · Cited by 1,914
Fused deposition modeling of novel scaffold architectures for tissue engineering applications
Zein, I., Hutmacher, D. W., Tan, K. C., & Teoh, S. H. (2002) · Biomaterials · doi:10.1016/s0142-9612(01)00232-0 · Cited by 1,874
Bone tissue engineering using 3D printing
Bose, S., Vahabzadeh, S., & Bandyopadhyay, A. (2013) · Materials Today · doi:10.1016/j.mattod.2013.11.017 · Cited by 1,866
Bioactive glass in tissue engineering
Rahaman, M. N., Day, D. E., Sonny Bal, B., Fu, Q., Jung, S. B., Bonewald, L. F., & Tomsia, A. P. (2011) · Acta Biomaterialia · doi:10.1016/j.actbio.2011.03.016 · Cited by 1,794
Osteoinduction, osteoconduction and osseointegration
T., A., & C., J. (2001) · European Spine Journal · doi:10.1007/s005860100282 · Cited by 1,751
Mechanisms of Nanoparticle-Induced Oxidative Stress and Toxicity
Manke, A., Wang, L., & Rojanasakul, Y. (2013) · BioMed Research International · doi:10.1155/2013/942916 · Cited by 1,727
Scaffolding in tissue engineering: general approaches and tissue-specific considerations
Chan, B. P., & Leong, K. W. (2008) · European Spine Journal · doi:10.1007/s00586-008-0745-3 · Cited by 1,708
Bone Tissue Engineering: State of the Art and Future Trends
Salgado, A. J., Coutinho, O. P., & Reis, R. L. (2004) · Macromolecular Bioscience · doi:10.1002/mabi.200400026 · Cited by 1,681
An Overview of Poly(lactic-co-glycolic) Acid (PLGA)-Based Biomaterials for Bone Tissue Engineering
Gentile, P., Chiono, V., Carmagnola, I., & Hatton, P. (2014) · International Journal of Molecular Sciences · doi:10.3390/ijms15033640 · Cited by 1,593
Current advances and future perspectives in extrusion-based bioprinting
Ozbolat, I. T., & Hospodiuk, M. (2016) · Biomaterials · doi:10.1016/j.biomaterials.2015.10.076 · Cited by 1,572
Bone tissue engineering using polycaprolactone scaffolds fabricated via selective laser sintering
Williams, J. M., Adewunmi, A., Schek, R. M., Flanagan, C. L., Krebsbach, P. H., Feinberg, S. E., Hollister, S. J., & Das, S. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2004.11.057 · Cited by 1,563
Markstedt, K., Mantas, A., Tournier, I., Martínez Ávila, H., Hägg, D., & Gatenholm, P. (2015) · Biomacromolecules · doi:10.1021/acs.biomac.5b00188 · Cited by 1,528
Three-dimensional bioprinting of thick vascularized tissues
Kolesky, D. B., Homan, K. A., Skylar-Scott, M. A., & Lewis, J. A. (2016) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1521342113 · Cited by 1,492
Mesenchymal Stem Cell Homing: The Devil Is in the Details
Karp, J. M., & Leng Teo, G. S. (2009) · Cell Stem Cell · doi:10.1016/j.stem.2009.02.001 · Cited by 1,445
Design properties of hydrogel tissue-engineering scaffolds
Zhu, J., & Marchant, R. E. (2011) · Expert Review of Medical Devices · doi:10.1586/erd.11.27 · Cited by 1,430
Hutmacher, D. W. (2001) · Journal of Biomaterials Science, Polymer Edition · doi:10.1163/156856201744489 · Cited by 1,409
Binding mechanisms in selective laser sintering and selective laser melting
Kruth, J., Mercelis, P., Van Vaerenbergh, J., Froyen, L., & Rombouts, M. (2005) · Rapid Prototyping Journal · doi:10.1108/13552540510573365 · Cited by 1,383
Polymeric Scaffolds for Bone Tissue Engineering
Liu, X., & Ma, P. X. (2004) · Annals of Biomedical Engineering · doi:10.1023/b:abme.0000017544.36001.8e · Cited by 1,345
The effect of pore size on cell adhesion in collagen-GAG scaffolds
O’Brien, F. J., Harley, B. A., Yannas, I. V., & Gibson, L. J. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2004.02.052 · Cited by 1,329
Collagen-Based Biomaterials for Tissue Engineering Applications
Parenteau-Bareil, R., Gauvin, R., & Berthod, F. (2010) · Materials · doi:10.3390/ma3031863 · Cited by 1,256
Organ printing: Tissue spheroids as building blocks
Mironov, V., Visconti, R. P., Kasyanov, V., Forgacs, G., Drake, C. J., & Markwald, R. R. (2009) · Biomaterials · doi:10.1016/j.biomaterials.2008.12.084 · Cited by 1,238
Additive manufacturing of tissues and organs
Melchels, F. P. W., Domingos, M. A. N., Klein, T. J., Malda, J., Bartolo, P. J., & Hutmacher, D. W. (2012) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2011.11.007 · Cited by 1,213
HUISKES, R., WEINANS, H., & RIETBERGEN, B. V. (1992) · Clinical Orthopaedics and Related Research · doi:10.1097/00003086-199201000-00014 · Cited by 1,213
Stolzing, A., Jones, E., McGonagle, D., & Scutt, A. (2008) · Mechanisms of Ageing and Development · doi:10.1016/j.mad.2007.12.002 · Cited by 1,195
Biomimetic porous scaffolds for bone tissue engineering
Wu, S., Liu, X., Yeung, K. W. K., Liu, C., & Yang, X. (2014) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2014.04.001 · Cited by 1,159
Electrospun silk-BMP-2 scaffolds for bone tissue engineering
Li, C., Vepari, C., Jin, H.-J., Kim, H. J., & Kaplan, D. L. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2006.01.022 · Cited by 1,140
Hyaluronic acid based scaffolds for tissue engineering—A review
Collins, M. N., & Birkinshaw, C. (2013) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2012.10.028 · Cited by 1,092
Mooney, D. J., Baldwin, D. F., Suh, N. P., Vacanti, J. P., & Langer, R. (1996) · Biomaterials · doi:10.1016/0142-9612(96)87284-x · Cited by 1,085
Leong, K. F., Cheah, C. M., & Chua, C. K. (2003) · Biomaterials · doi:10.1016/s0142-9612(03)00030-9 · Cited by 1,076
Spheroid culture as a tool for creating 3D complex tissues
Fennema, E., Rivron, N., Rouwkema, J., van Blitterswijk, C., & de Boer, J. (2013) · Trends in Biotechnology · doi:10.1016/j.tibtech.2012.12.003 · Cited by 1,054 · cited 1×
“Cell aggregates or spheroids have superior intercellular communication and extracellular matrix development when compared to cells grown in 2D culture, potentially accelerating the growth of printed constructs towards functional tissue after bioprinting [85].”
BackgroundOuyang, L., Yao, R., Zhao, Y., & Sun, W. (2016) · Biofabrication · doi:10.1088/1758-5090/8/3/035020 · Cited by 1,045
Potential of ceramic materials as permanently implantable skeletal prostheses
Hulbert, S. F., Young, F. A., Mathews, R. S., Klawitter, J. J., Talbert, C. D., & Stelling, F. H. (1970) · Journal of Biomedical Materials Research · doi:10.1002/jbm.820040309 · Cited by 1,019
Hutmacher, D. W., Schantz, J. T., Lam, C. X. F., Tan, K. C., & Lim, T. C. (2007) · Journal of Tissue Engineering and Regenerative Medicine · doi:10.1002/term.24 · Cited by 1,007
Hyaluronic acid: a natural biopolymer with a broad range of biomedical and industrial applications
Kogan, G., Šoltés, L., Stern, R., & Gemeiner, P. (2006) · Biotechnology Letters · doi:10.1007/s10529-006-9219-z · Cited by 1,000
Bose, S., & Tarafder, S. (2012) · Acta Biomaterialia · doi:10.1016/j.actbio.2011.11.017 · Cited by 958
Bartosh, T. J., Ylöstalo, J. H., Mohammadipoor, A., Bazhanov, N., Coble, K., Claypool, K., Lee, R. H., Choi, H., & Prockop, D. J. (2010) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1008117107 · Cited by 958
3D Printing of Scaffolds for Tissue Regeneration Applications
Do, A., Khorsand, B., Geary, S. M., & Salem, A. K. (2015) · Advanced Healthcare Materials · doi:10.1002/adhm.201500168 · Cited by 949
Scaffold Design for Bone Regeneration
Polo-Corrales, L., Latorre-Esteves, M., & Ramirez-Vick, J. E. (2014) · Journal of Nanoscience and Nanotechnology · doi:10.1166/jnn.2014.9127 · Cited by 945
Current concepts of molecular aspects of bone healing
Dimitriou, R., Tsiridis, E., & Giannoudis, P. V. (2005) · Injury · doi:10.1016/j.injury.2005.07.019 · Cited by 945
Chitin and chitosan in selected biomedical applications
Anitha, A., Sowmya, S., Kumar, P. T. S., Deepthi, S., Chennazhi, K. P., Ehrlich, H., Tsurkan, M., & Jayakumar, R. (2014) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2014.02.008 · Cited by 931
Electrospinning of chitosan dissolved in concentrated acetic acid solution
Geng, X., Kwon, O.-H., & Jang, J. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2005.01.066 · Cited by 921
Medical Applications for 3D Printing: Current and Projected Uses.
Ventola, C. L. (2014) · PubMed Central · Cited by 920
Polymeric materials for bone and cartilage repair
Puppi, D., Chiellini, F., Piras, A. M., & Chiellini, E. (2010) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2010.01.006 · Cited by 913
Functionalized silk-based biomaterials for bone formation
Sofia, S., McCarthy, M. B., Gronowicz, G., & Kaplan, D. L. (2001) · Journal of Biomedical Materials Research · doi:10.1002/1097-4636(200101)54:1<139::aid-jbm17>3.0.co;2-7 · Cited by 819
Effect of Pore Size and Void Fraction on Cellular Adhesion, Proliferation, and Matrix Deposition
Zeltinger, J., Sherwood, J. K., Graham, D. A., Müeller, R., & Griffith, L. G. (2001) · Tissue Engineering · doi:10.1089/107632701753213183 · Cited by 794
Poly(lactide-co-glycolide)/hydroxyapatite composite scaffolds for bone tissue engineering
Kim, S.-S., Sun Park, M., Jeon, O., Yong Choi, C., & Kim, B.-S. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2005.08.016 · Cited by 766
Advantages of RGD peptides for directing cell association with biomaterials
Bellis, S. L. (2011) · Biomaterials · doi:10.1016/j.biomaterials.2011.02.029 · Cited by 745
Designing Biomaterials for 3D Printing
Guvendiren, M., Molde, J., Soares, R. M. D., & Kohn, J. (2016) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.6b00121 · Cited by 732
Evolution of bone transplantation: molecular, cellular and tissue strategies to engineer human bone
Yaszemski, M. J., Payne, R. G., Hayes, W. C., Langer, R., & Mikos, A. G. (1996) · Biomaterials · doi:10.1016/0142-9612(96)85762-0 · Cited by 729
Applications of synthetic polymers in clinical medicine
Maitz, M. F. (2015) · Biosurface and Biotribology · doi:10.1016/j.bsbt.2015.08.002 · Cited by 726
Hollister, S. J., Maddox, R. D., & Taboas, J. M. (2002) · Biomaterials · doi:10.1016/s0142-9612(02)00148-5 · Cited by 715
Pore Size of Porous Hydroxyapatite as the Cell-Substratum Controls BMP-Induced Osteogenesis
Tsuruga, E., Takita, H., Itoh, H., Wakisaka, Y., & Kuboki, Y. (1997) · Journal of Biochemistry · doi:10.1093/oxfordjournals.jbchem.a021589 · Cited by 706
Bone-Graft Substitutes: Facts, Fictions, and Applications
Greenwald, A. S., Boden, S. D., Goldberg, V. M., Khan, Y., Laurencin, C. T., & Rosier, R. N. (2001) · The Journal of Bone and Joint Surgery-American Volume · doi:10.2106/00004623-200100022-00007 · Cited by 703
Biomimetic chitosan–nanohydroxyapatite composite scaffolds for bone tissue engineering
Thein-Han, W. W., & Misra, R. D. K. (2009) · Acta Biomaterialia · doi:10.1016/j.actbio.2008.11.025 · Cited by 694
Advanced Bioinks for 3D Printing: A Materials Science Perspective
Chimene, D., Lennox, K. K., Kaunas, R. R., & Gaharwar, A. K. (2016) · Annals of Biomedical Engineering · doi:10.1007/s10439-016-1638-y · Cited by 679
Chitosan-based scaffolds for bone tissue engineering
Levengood, S. K. L., & Zhang, M. (2014) · Journal of Materials Chemistry B · doi:10.1039/c4tb00027g · Cited by 672
Nano-structured smart hydrogels with rapid response and high elasticity
Xia, L.-W., Xie, R., Ju, X.-J., Wang, W., Chen, Q., & Chu, L.-Y. (2013) · Nature Communications · doi:10.1038/ncomms3226 · Cited by 671
Bioactive Nanoengineered Hydrogels for Bone Tissue Engineering: A Growth-Factor-Free Approach
Xavier, J. R., Thakur, T., Desai, P., Jaiswal, M. K., Sears, N., Cosgriff-Hernandez, E., Kaunas, R., & Gaharwar, A. K. (2015) · ACS Nano · doi:10.1021/nn507488s · Cited by 653
Osteoinduction of bone grafting materials for bone repair and regeneration
García-Gareta, E., Coathup, M. J., & Blunn, G. W. (2015) · Bone · doi:10.1016/j.bone.2015.07.007 · Cited by 649
A novel method to fabricate bioabsorbable scaffolds
Whang, K., Thomas, C. H., Healy, K. E., & Nuber, G. (1995) · Polymer · doi:10.1016/0032-3861(95)93115-3 · Cited by 639
Biodegradable Polymer Scaffolds with Well-Defined Interconnected Spherical Pore Network
Ma, P. X., & Choi, J.-W. (2001) · Tissue Engineering · doi:10.1089/107632701300003269 · Cited by 620
3D microenvironment as essential element for osteoinduction by biomaterials
Habibovic, P., Yuan, H., van der Valk, C. M., Meijer, G., van Blitterswijk, C. A., & de Groot, K. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2004.09.056 · Cited by 615
Recent advances in bioprinting techniques: approaches, applications and future prospects
Li, J., Chen, M., Fan, X., & Zhou, H. (2016) · Journal of Translational Medicine · doi:10.1186/s12967-016-1028-0 · Cited by 608
Marcacci, M., Kon, E., Moukhachev, V., Lavroukov, A., Kutepov, S., Quarto, R., Mastrogiacomo, M., & Cancedda, R. (2007) · Tissue Engineering · doi:10.1089/ten.2006.0271 · Cited by 589 · cited 1×
“insertion into 4 patients with long bone defects [210].”
BackgroundThermal Inkjet Printing in Tissue Engineering and Regenerative Medicine
Cui, X., Boland, T., D.D'Lima, D., & K. Lotz, M. (2012) · Recent Patents on Drug Delivery & Formulation · doi:10.2174/187221112800672949 · Cited by 581
Use of stereolithography to manufacture critical‐sized 3D biodegradable scaffolds for bone ingrowth
Cooke, M. N., Fisher, J. P., Dean, D., Rimnac, C., & Mikos, A. G. (2003) · Journal of Biomedical Materials Research Part B: Applied Biomaterials · doi:10.1002/jbm.b.10485 · Cited by 571
Ceramic composites as matrices and scaffolds for drug delivery in tissue engineering
Habraken, W. J. E. M., Wolke, J. G. C., & Jansen, J. A. (2007) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2007.03.011 · Cited by 566
Bonfield, W., Grynpas, M. D., Tully, A. E., Bowman, J., & Abram, J. (1981) · Biomaterials · doi:10.1016/0142-9612(81)90050-8 · Cited by 546
Bioactive glasses beyond bone and teeth: Emerging applications in contact with soft tissues
Miguez-Pacheco, V., Hench, L. L., & Boccaccini, A. R. (2015) · Acta Biomaterialia · doi:10.1016/j.actbio.2014.11.004 · Cited by 544
Yao, Q., Cosme, J. G. L., Xu, T., Miszuk, J. M., Picciani, P. H. S., Fong, H., & Sun, H. (2017) · Biomaterials · doi:10.1016/j.biomaterials.2016.11.018 · Cited by 543
Injectable alginate hydrogels for cell delivery in tissue engineering
Bidarra, S. J., Barrias, C. C., & Granja, P. L. (2014) · Acta Biomaterialia · doi:10.1016/j.actbio.2013.12.006 · Cited by 534
Kim, J., Kim, I. S., Cho, T. H., Lee, K. B., Hwang, S. J., Tae, G., Noh, I., Lee, S. H., Park, Y., & Sun, K. (2007) · Biomaterials · doi:10.1016/j.biomaterials.2006.11.050 · Cited by 519
Nanocomposites: Structure, Phase Behavior, and Properties
Kumar, S. K., & Krishnamoorti, R. (2010) · Annual Review of Chemical and Biomolecular Engineering · doi:10.1146/annurev-chembioeng-073009-100856 · Cited by 514
The cost of drug development: A systematic review
Morgan, S., Grootendorst, P., Lexchin, J., Cunningham, C., & Greyson, D. (2011) · Health Policy · doi:10.1016/j.healthpol.2010.12.002 · Cited by 510
Muschler, G. F., Nitto, H., Boehm, C. A., & Easley, K. A. (2001) · Journal of Orthopaedic Research · doi:10.1016/s0736-0266(00)00010-3 · Cited by 504
Key factors in the rising cost of new drug discovery and development
Dickson, M., & Gagnon, J. P. (2004) · Nature Reviews Drug Discovery · doi:10.1038/nrd1382 · Cited by 498
Injectable chitosan-based hydrogels for cartilage tissue engineering
Jin, R., Moreira Teixeira, L. S., Dijkstra, P. J., Karperien, M., van Blitterswijk, C. A., Zhong, Z. Y., & Feijen, J. (2009) · Biomaterials · doi:10.1016/j.biomaterials.2009.01.020 · Cited by 485
Patel, N., Best, S. M., Bonfield, W., Gibson, I. R., Hing, K. A., Damien, E., & Revell, P. A. (2002) · Journal of Materials Science: Materials in Medicine · doi:10.1023/a:1021114710076 · Cited by 484
Modulation of the Inflammatory Response for Enhanced Bone Tissue Regeneration
Mountziaris, P. M., & Mikos, A. G. (2008) · Tissue Engineering Part B: Reviews · doi:10.1089/ten.teb.2008.0038 · Cited by 483
Faulkner-Jones, A., Fyfe, C., Cornelissen, D.-J., Gardner, J., King, J., Courtney, A., & Shu, W. (2015) · Biofabrication · doi:10.1088/1758-5090/7/4/044102 · Cited by 474
Self-citationDesign and 3D Printing of Scaffolds and Tissues
An, J., Teoh, J. E. M., Suntornnond, R., & Chua, C. K. (2015) · Engineering · doi:10.15302/j-eng-2015061 · Cited by 461
Poly (Lactic Acid) Production for Tissue Engineering Applications
Lopes, M. S., Jardini, A. L., & Filho, R. M. (2012) · Procedia Engineering · doi:10.1016/j.proeng.2012.07.534 · Cited by 457
Bone grafting, orthopaedic biomaterials, and the clinical need for bone engineering
Brydone, A. S., Meek, D., & Maclaine, S. (2010) · Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine · doi:10.1243/09544119jeim770 · Cited by 456
Oliveira, J. M., Rodrigues, M. T., Silva, S. S., Malafaya, P. B., Gomes, M. E., Viegas, C. A., Dias, I. R., Azevedo, J. T., Mano, J. F., & Reis, R. L. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2006.07.034 · Cited by 448
Keriquel, V., Oliveira, H., Rémy, M., Ziane, S., Delmond, S., Rousseau, B., Rey, S., Catros, S., Amédée, J., Guillemot, F., et al. (2017) · Scientific Reports · doi:10.1038/s41598-017-01914-x · Cited by 447
Direct‐write bioprinting three‐dimensional biohybrid systems for future regenerative therapies
Chang, C. C., Boland, E. D., Williams, S. K., & Hoying, J. B. (2011) · Journal of Biomedical Materials Research Part B: Applied Biomaterials · doi:10.1002/jbm.b.31831 · Cited by 445
Kuboki, Y., Jin, Q., & Takita, H. (2001) · The Journal of Bone and Joint Surgery-American Volume · doi:10.2106/00004623-200100002-00005 · Cited by 433
Electrospun nanostructured scaffolds for bone tissue engineering
Prabhakaran, M. P., Venugopal, J., & Ramakrishna, S. (2009) · Acta Biomaterialia · doi:10.1016/j.actbio.2009.05.007 · Cited by 430 · cited 1×
“niques including 3D printing [80] and electrospinning [127,195].”
BackgroundBone composition: relationship to bone fragility and antiosteoporotic drug effects
Boskey, A. L. (2013) · BoneKEy Reports · doi:10.1038/bonekey.2013.181 · Cited by 424 · cited 1×
“Bone is a heterogenous composite material with constituents including hydroxyapatite mineral (Ca10(PO4)6(OH)2) [14], a mixed organic component (type I collagen, lipids and non-collagenous proteins) and water [15,16].”
BackgroundThe nature of laponite and its aqueous dispersions
Thompson, D. W., & Butterworth, J. T. (1992) · Journal of Colloid and Interface Science · doi:10.1016/0021-9797(92)90254-j · Cited by 419
Poly(lactide- co -glycolide) porous scaffolds for tissue engineering and regenerative medicine
Pan, Z., & Ding, J. (2012) · Interface Focus · doi:10.1098/rsfs.2011.0123 · Cited by 418
Methods for the treatment of collagenous tissues for bioprostheses
Khor, E. (1997) · Biomaterials · doi:10.1016/s0142-9612(96)00106-8 · Cited by 415
Hydroxyapatite–Carbon Nanotube Composites for Biomedical Applications: A Review
White, A. A., Best, S. M., & Kinloch, I. A. (2007) · International Journal of Applied Ceramic Technology · doi:10.1111/j.1744-7402.2007.02113.x · Cited by 414
Engineering Bone Regeneration with Bioabsorbable Scaffolds with Novel Microarchitecture
Whang, K., Healy, K. E., Elenz, D. R., Nam, E. K., Tsai, D. C., Thomas, C. H., Nuber, G. W., Glorieux, F. H., Travers, R., & Sprague, S. M. (1999) · Tissue Engineering · doi:10.1089/ten.1999.5.35 · Cited by 405
Resorbable biomaterials as bone graft substitutes
Bohner, M. (2010) · Materials Today · doi:10.1016/s1369-7021(10)70014-6 · Cited by 405
Fedorovich, N. E., Schuurman, W., Wijnberg, H. M., Prins, H.-J., van Weeren, P. R., Malda, J., Alblas, J., & Dhert, W. J. A. (2012) · Tissue Engineering Part C: Methods · doi:10.1089/ten.tec.2011.0060 · Cited by 403
High-strength silk protein scaffolds for bone repair
Mandal, B. B., Grinberg, A., Seok Gil, E., Panilaitis, B., & Kaplan, D. L. (2012) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1119474109 · Cited by 401
Mechanical characterization of collagen–glycosaminoglycan scaffolds
HARLEY, B., LEUNG, J., SILVA, E., & GIBSON, L. (2007) · Acta Biomaterialia · doi:10.1016/j.actbio.2006.12.009 · Cited by 398
Jakus, A. E., Rutz, A. L., Jordan, S. W., Kannan, A., Mitchell, S. M., Yun, C., Koube, K. D., Yoo, S. C., Whiteley, H. E., Richter, C.-P., et al. (2016) · Science Translational Medicine · doi:10.1126/scitranslmed.aaf7704 · Cited by 396
Bioprinted Osteogenic and Vasculogenic Patterns for Engineering 3D Bone Tissue
Byambaa, B., Annabi, N., Yue, K., Trujillo‐de Santiago, G., Alvarez, M. M., Jia, W., Kazemzadeh‐Narbat, M., Shin, S. R., Tamayol, A., & Khademhosseini, A. (2017) · Advanced Healthcare Materials · doi:10.1002/adhm.201700015 · Cited by 394
Three-dimensional bioprinting of complex cell laden alginate hydrogel structures
Tabriz, A. G., Hermida, M. A., Leslie, N. R., & Shu, W. (2015) · Biofabrication · doi:10.1088/1758-5090/7/4/045012 · Cited by 393
Self-citationAligned PLGA/HA nanofibrous nanocomposite scaffolds for bone tissue engineering
JOSE, M., THOMAS, V, JOHNSON, K., DEAN, D., & NYAIRO, E. (2009) · Acta Biomaterialia · doi:10.1016/j.actbio.2008.07.019 · Cited by 390
Biomaterials for Vascular Tissue Engineering
Ravi, S., & Chaikof, E. L. (2010) · Regenerative Medicine · doi:10.2217/rme.09.77 · Cited by 387
Chitosan based biocomposite scaffolds for bone tissue engineering
Saravanan, S., Leena, R. S., & Selvamurugan, N. (2016) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2016.01.112 · Cited by 384
Silk Fibroin in Tissue Engineering
Kasoju, N., & Bora, U. (2012) · Advanced Healthcare Materials · doi:10.1002/adhm.201200097 · Cited by 383
Biofabrication of tissue constructs by 3D bioprinting of cell-laden microcarriers
Levato, R., Visser, J., Planell, J. A., Engel, E., Malda, J., & Mateos-Timoneda, M. A. (2014) · Biofabrication · doi:10.1088/1758-5082/6/3/035020 · Cited by 380
Marra, K. G., Szem, J. W., Kumta, P. N., DiMilla, P. A., & Weiss, L. E. (1999) · Journal of Biomedical Materials Research · doi:10.1002/(sici)1097-4636(19991205)47:3<324::aid-jbm6>3.0.co;2-y · Cited by 380
Nanostructured Pluronic hydrogels as bioinks for 3D bioprinting
Müller, M., Becher, J., Schnabelrauch, M., & Zenobi-Wong, M. (2015) · Biofabrication · doi:10.1088/1758-5090/7/3/035006 · Cited by 371
Tallawi, M., Rosellini, E., Barbani, N., Cascone, M. G., Rai, R., Saint-Pierre, G., & Boccaccini, A. R. (2015) · Journal of The Royal Society Interface · doi:10.1098/rsif.2015.0254 · Cited by 366
Inkjet printing biomaterials for tissue engineering: bioprinting
Saunders, R. E., & Derby, B. (2014) · International Materials Reviews · doi:10.1179/1743280414y.0000000040 · Cited by 365
Shu, X. Z., Liu, Y., Palumbo, F., & Prestwich, G. D. (2003) · Biomaterials · doi:10.1016/s0142-9612(03)00267-9 · Cited by 363
Direct Freeform Fabrication of Seeded Hydrogels in Arbitrary Geometries
Cohen, D. L., Malone, E., Lipson, H., & Bonassar, L. J. (2006) · Tissue Engineering · doi:10.1089/ten.2006.12.1325 · Cited by 360
Surface modification of ultra thin poly (ε-caprolactone) films using acrylic acid and collagen
Cheng, Z., & Teoh, S.-H. (2004) · Biomaterials · doi:10.1016/j.biomaterials.2003.08.038 · Cited by 359
Scaffolds based bone tissue engineering: the role of chitosan
Costa-Pinto, A. R., Reis, R. L., & Neves, N. M. (2011) · Tissue Engineering Part B Reviews · doi:10.1089/ten.teb.2010.0704 · Cited by 355
Nano-fibrous scaffolding promotes osteoblast differentiation and biomineralization
Woo, K. M., Jun, J.-H., Chen, V. J., Seo, J., Baek, J.-H., Ryoo, H.-M., Kim, G.-S., Somerman, M. J., & Ma, P. X. (2007) · Biomaterials · doi:10.1016/j.biomaterials.2006.06.013 · Cited by 350
Heparin-functionalized polymeric biomaterials in tissue engineering and drug delivery applications
Liang, Y., & Kiick, K. L. (2014) · Acta Biomaterialia · doi:10.1016/j.actbio.2013.07.031 · Cited by 349
Organ printing: from bioprinter to organ biofabrication line
Mironov, V., Kasyanov, V., & Markwald, R. R. (2011) · Current Opinion in Biotechnology · doi:10.1016/j.copbio.2011.02.006 · Cited by 343
Gao, G., Yonezawa, T., Hubbell, K., Dai, G., & Cui, X. (2015) · Biotechnology Journal · doi:10.1002/biot.201400635 · Cited by 340
VEGF Scaffolds Enhance Angiogenesis and Bone Regeneration in Irradiated Osseous Defects
Kaigler, D., Wang, Z., Horger, K., Mooney, D. J., & Krebsbach, P. H. (2006) · Journal of Bone and Mineral Research · doi:10.1359/jbmr.060120 · Cited by 340
Fabrication and characterization of PLGA/HAp composite scaffolds for delivery of BMP-2 plasmid DNA
Nie, H., & Wang, C.-H. (2007) · Journal of Controlled Release · doi:10.1016/j.jconrel.2007.03.018 · Cited by 339
Biodegradable Polymer Membranes Applied in Guided Bone/Tissue Regeneration: A Review
Wang, J., Wang, L., Zhou, Z., Lai, H., Xu, P., Liao, L., & Wei, J. (2016) · Polymers · doi:10.3390/polym8040115 · Cited by 339
Injectable chitosan hyaluronic acid hydrogels for cartilage tissue engineering
Park, H., Choi, B., Hu, J., & Lee, M. (2013) · Acta Biomaterialia · doi:10.1016/j.actbio.2012.08.033 · Cited by 337
Maquet, V., Boccaccini, A. R., Pravata, L., Notingher, I., & Jérôme, R. (2004) · Biomaterials · doi:10.1016/j.biomaterials.2003.10.082 · Cited by 335
Zhao, L., Weir, M. D., & Xu, H. H. K. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.05.017 · Cited by 334
Poly(dopamine) coating of 3D printed poly(lactic acid) scaffolds for bone tissue engineering
Kao, C.-T., Lin, C.-C., Chen, Y.-W., Yeh, C.-H., Fang, H.-Y., & Shie, M.-Y. (2015) · Materials Science and Engineering: C · doi:10.1016/j.msec.2015.06.028 · Cited by 327
The role of silicon in osteoblast-like cell proliferation and apoptosis
Shie, M.-Y., Ding, S.-J., & Chang, H.-C. (2011) · Acta Biomaterialia · doi:10.1016/j.actbio.2011.02.023 · Cited by 326
The BMP signaling and in vivo bone formation
Cao, X., & Chen, D. (2005) · Gene · doi:10.1016/j.gene.2005.06.017 · Cited by 321
Jin, R., Moreira Teixeira, L. S., Krouwels, A., Dijkstra, P. J., van Blitterswijk, C. A., Karperien, M., & Feijen, J. (2010) · Acta Biomaterialia · doi:10.1016/j.actbio.2009.12.024 · Cited by 319
Hydroxyapatite and Hydroxyapatite-Based Ceramics
Orlovskii, V. P., Komlev, V. S., & Barinov, S. M. (2002) · Inorganic Materials · doi:10.1023/a:1020585800572 · Cited by 312
Current Progress in Bioactive Ceramic Scaffolds for Bone Repair and Regeneration
Gao, C., Deng, Y., Feng, P., Mao, Z., Li, P., Yang, B., Deng, J., Cao, Y., Shuai, C., & Peng, S. (2014) · International Journal of Molecular Sciences · doi:10.3390/ijms15034714 · Cited by 310
Advanced biomaterials for skeletal tissue regeneration: Instructive and smart functions
Barrère, F., Mahmood, T. A., de Groot, K., & van Blitterswijk, C. A. (2008) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2007.12.001 · Cited by 303
Polysaccharide‐modified synthetic polymeric biomaterials
Baldwin, A. D., & Kiick, K. L. (2010) · Peptide Science · doi:10.1002/bip.21334 · Cited by 287
Bone Tissue Engineering and Regeneration: From Discovery to the Clinic—An Overview
O'Keefe, R. J., & Mao, J. (2011) · Tissue Engineering Part B: Reviews · doi:10.1089/ten.teb.2011.0475 · Cited by 285
Roosa, S. M. M., Kemppainen, J. M., Moffitt, E. N., Krebsbach, P. H., & Hollister, S. J. (2010) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.32381 · Cited by 283
Jiang, T., Abdel-Fattah, W. I., & Laurencin, C. T. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2006.05.025 · Cited by 283
Liao, C., Chen, C., Chen, J., Chiang, S., Lin, Y., & Chang, K. (2002) · Journal of Biomedical Materials Research · doi:10.1002/jbm.10030 · Cited by 283
Xu, T., Miszuk, J. M., Zhao, Y., Sun, H., & Fong, H. (2015) · Advanced Healthcare Materials · doi:10.1002/adhm.201500345 · Cited by 282
Arcos, D., & Vallet-Regí, M. (2013) · Acta Materialia · doi:10.1016/j.actamat.2012.10.039 · Cited by 282
Hyaluronan receptor-directed assembly of chondrocyte pericellular matrix.
Knudson, C. B. (1993) · The Journal of cell biology · doi:10.1083/jcb.120.3.825 · Cited by 282
Bioabsorbable implant material review
Maurus, P. B., & Kaeding, C. C. (2004) · Operative Techniques in Sports Medicine · doi:10.1053/j.otsm.2004.07.015 · Cited by 280
Internalization of hyaluronan by chondrocytes occurs via receptor-mediated endocytosis
Hua, Q., Knudson, C. B., & Knudson, W. (1993) · Journal of Cell Science · doi:10.1242/jcs.106.1.365 · Cited by 278
3D Bioprinting of Developmentally Inspired Templates for Whole Bone Organ Engineering
Daly, A. C., Cunniffe, G. M., Sathy, B. N., Jeon, O., Alsberg, E., & Kelly, D. J. (2016) · Advanced Healthcare Materials · doi:10.1002/adhm.201600182 · Cited by 272
Baraniak, P. R., & McDevitt, T. C. (2012) · Cell and Tissue Research · doi:10.1007/s00441-011-1215-5 · Cited by 270
Yu, Y., Moncal, K. K., Li, J., Peng, W., Rivero, I., Martin, J. A., & Ozbolat, I. T. (2016) · Scientific Reports · doi:10.1038/srep28714 · Cited by 269
Fu, S., Ni, P., Wang, B., Chu, B., Zheng, L., Luo, F., Luo, J., & Qian, Z. (2012) · Biomaterials · doi:10.1016/j.biomaterials.2012.03.040 · Cited by 268
Printing Technologies for Medical Applications
Shafiee, A., & Atala, A. (2016) · Trends in Molecular Medicine · doi:10.1016/j.molmed.2016.01.003 · Cited by 265
Dhivya, S., Saravanan, S., Sastry, T. P., & Selvamurugan, N. (2015) · Journal of Nanobiotechnology · doi:10.1186/s12951-015-0099-z · Cited by 263
Injectable glycopolypeptide hydrogels as biomimetic scaffolds for cartilage tissue engineering
Ren, K., He, C., Xiao, C., Li, G., & Chen, X. (2015) · Biomaterials · doi:10.1016/j.biomaterials.2015.02.026 · Cited by 263
Novel processing of iron–manganese alloy-based biomaterials by inkjet 3-D printing
Chou, D.-T., Wells, D., Hong, D., Lee, B., Kuhn, H., & Kumta, P. N. (2013) · Acta Biomaterialia · doi:10.1016/j.actbio.2013.04.016 · Cited by 259
Department of Anatomy, R. C. O. S. I. I., Gleeson, J., Plunkett, N., & O’Brien, F. (2010) · European Cells and Materials · doi:10.22203/ecm.v020a18 · Cited by 257
Calcium phosphate bone graft substitutes: Failures and hopes
Bohner, M., Galea, L., & Doebelin, N. (2012) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2012.02.028 · Cited by 256
Design of graded biomimetic osteochondral composite scaffolds
Tampieri, A., Sandri, M., Landi, E., Pressato, D., Francioli, S., Quarto, R., & Martin, I. (2008) · Biomaterials · doi:10.1016/j.biomaterials.2008.05.008 · Cited by 256
Pluronic F127 as a Cell Encapsulation Material: Utilization of Membrane-Stabilizing Agents
Khattak, S. F., Bhatia, S. R., & Roberts, S. C. (2005) · Tissue Engineering · doi:10.1089/ten.2005.11.974 · Cited by 254
Cross-Linking Electrospun Type II Collagen Tissue Engineering Scaffolds with Carbodiimide in Ethanol
Barnes, C. P., Pemble, C. W., Brand, D. D., Simpson, D. G., & Bowlin, G. L. (2007) · Tissue Engineering · doi:10.1089/ten.2006.0292 · Cited by 253
Stanton, M. M., Samitier, J., & Sánchez, S. (2015) · Lab on a Chip · doi:10.1039/c5lc90069g · Cited by 252
Engineering porous scaffolds using gas-based techniques
Dehghani, F., & Annabi, N. (2011) · Current Opinion in Biotechnology · doi:10.1016/j.copbio.2011.04.005 · Cited by 251
3D bioprinting of BM-MSCs-loaded ECM biomimetic hydrogels for in vitro neocartilage formation
Costantini, M., Idaszek, J., Szöke, K., Jaroszewicz, J., Dentini, M., Barbetta, A., Brinchmann, J. E., & Święszkowski, W. (2016) · Biofabrication · doi:10.1088/1758-5090/8/3/035002 · Cited by 250
Tissue engineering of bone: search for a better scaffold
Mastrogiacomo, M., Muraglia, A., Komlev, V, Peyrin, F., Rustichelli, F., Crovace, A., & Cancedda, R. (2005) · Orthodontics & Craniofacial Research · doi:10.1111/j.1601-6343.2005.00350.x · Cited by 250
The Role of the Osteoconductive Scaffold in Synthetic Bone Graft
Vaccaro, A. R. (2002) · Orthopedics · doi:10.3928/0147-7447-20020502-05 · Cited by 248
In vivo evaluation of plasma-sprayed wollastonite coating
Xue, W., Liu, X., Zheng, X., & Ding, C. (2004) · Biomaterials · doi:10.1016/j.biomaterials.2004.09.027 · Cited by 245
Stereolithographic Bone Scaffold Design Parameters: Osteogenic Differentiation and Signal Expression
Kim, K., Yeatts, A., Dean, D., & Fisher, J. P. (2010) · Tissue Engineering Part B: Reviews · doi:10.1089/ten.teb.2010.0171 · Cited by 245
Radhakrishnan, J., Subramanian, A., Krishnan, U. M., & Sethuraman, S. (2017) · Biomacromolecules · doi:10.1021/acs.biomac.6b01619 · Cited by 244
Cao, H., Mchugh, K., Chew, S. Y., & Anderson, J. M. (2010) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.32609 · Cited by 243
A Perspective on the Clinical Translation of Scaffolds for Tissue Engineering
Webber, M. J., Khan, O. F., Sydlik, S. A., Tang, B. C., & Langer, R. (2015) · Annals of Biomedical Engineering · doi:10.1007/s10439-014-1104-7 · Cited by 243
Bone matrix proteins: their function, regulation, and relationship to osteoporosis
Young, M. F. (2003) · Osteoporosis International · doi:10.1007/s00198-002-1342-7 · Cited by 243
Pectin-based injectable biomaterials for bone tissue engineering
Munarin, F., Guerreiro, S. G., Grellier, M. A., Tanzi, M. C., Barbosa, M. A., Petrini, P., & Granja, P. L. (2011) · Biomacromolecules · doi:10.1021/bm101110x · Cited by 242
Chen, Q., Zhu, C., & Thouas, G. A. (2012) · Progress in Biomaterials · doi:10.1186/2194-0517-1-2 · Cited by 240
Phage Nanofibers Induce Vascularized Osteogenesis in 3D Printed Bone Scaffolds
Wang, J., Yang, M., Zhu, Y., Wang, L., Tomsia, A. P., & Mao, C. (2014) · Advanced Materials · doi:10.1002/adma.201400154 · Cited by 239
Nie, T., Baldwin, A., Yamaguchi, N., & Kiick, K. L. (2007) · Journal of Controlled Release · doi:10.1016/j.jconrel.2007.04.019 · Cited by 239
Polymer-based composite scaffolds for tissue engineering.
Gloria, A., Santis, R. D., & Ambrosio, L. (2010) · PubMed · Cited by 234
Cited by
Recent advances in biomaterials for 3D scaffolds: A review
Nikolova, M. P., & Chavali, M. S. (2019) · Bioactive Materials · doi:10.1016/j.bioactmat.2019.10.005 · Cited by 907
“In general, most conventional techniques for scaffold production are incapable of creating complex scaffolds with precisely controlled microarchitecture and properties [43].”
BackgroundScaffold Fabrication Technologies and Structure/Function Properties in Bone Tissue Engineering
Collins, M. N., Ren, G., Young, K., Pina, S., Reis, R. L., & Oliveira, J. M. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202010609 · Cited by 867
Porous scaffolds for bone regeneration
Abbasi, N., Hamlet, S., Love, R. M., & Nguyen, N.-T. (2020) · Journal of Science: Advanced Materials and Devices · doi:10.1016/j.jsamd.2020.01.007 · Cited by 858
Nanocomposite scaffolds for accelerating chronic wound healing by enhancing angiogenesis
Nosrati, H., Aramideh Khouy, R., Nosrati, A., Khodaei, M., Banitalebi-Dehkordi, M., Ashrafi-Dehkordi, K., Sanami, S., & Alizadeh, Z. (2021) · Journal of Nanobiotechnology · doi:10.1186/s12951-020-00755-7 · Cited by 720
Fabrication of Scaffolds for Bone-Tissue Regeneration
Chocholata, P., Kulda, V., & Babuska, V. (2019) · Materials · doi:10.3390/ma12040568 · Cited by 603
Metadata
- Authors
- Turnbull, G., Clarke, J., Picard, F., Riches, P., Jia, L., Han, F., Li, B., & Shu, W.
- Venue
- Bioactive Materials
- Publisher
- Elsevier BV
- Published
- 2018-09
- Volume
- 3
- Issue
- 3
- Pages
- 278-314
- ISSN
- 2097-1192 (ISSN-L)
- 2452-199X
- OpenAlex
- W2774085282
- Cited by
- 1,332
- References
- 400
- FWCI
- 35.50
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.