The DOI matches its Crossref record; 621 of the 621 references it cites were found in a registry or an index.
Defects and anomalies in powder bed fusion metal additive manufacturing
Open accessOverview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Additive manufacturing of metallic components – Process, structure and properties
DebRoy, T., Wei, H. L., Zuback, J. S., Mukherjee, T., Elmer, J. W., Milewski, J. O., Beese, A. M., Wilson-Heid, A., De, A., & Zhang, W. (2018) · Progress in Materials Science · doi:10.1016/j.pmatsci.2017.10.001 · Cited by 8,805
The Deformation and Ageing of Mild Steel: III Discussion of Results
Hall, E. O. (1951) · Proceedings of the Physical Society. Section B · doi:10.1088/0370-1301/64/9/303 · Cited by 7,872
Hydrodynamic and hydromagnetic stability
Chandrasekhar, S. (1961) · CERN Document Server (European Organization for Nuclear Research) · Cited by 6,730
Additive manufacturing of metals
Herzog, D., Seyda, V., Wycisk, E., & Emmelmann, C. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.07.019 · Cited by 4,759
(1962) · Journal of the Franklin Institute · doi:10.1016/s0016-0032(62)91145-6 · Cited by 4,391
The deformation of plastically non-homogeneous materials
Ashby, M. F. (1970) · The Philosophical Magazine: A Journal of Theoretical Experimental and Applied Physics · doi:10.1080/14786437008238426 · Cited by 4,296
The conflicts between strength and toughness
Ritchie, R. O. (2011) · Nature Materials · doi:10.1038/nmat3115 · Cited by 3,989
The Cleavage Strength of Polycrystals
Petch, N. J. (1953) · Medical Entomology and Zoology · Cited by 3,641
Titanium and Titanium Alloys: Fundamentals and Applications
(2003) · Wiley eBooks · doi:10.1002/3527602119 · Cited by 3,108
3D printing of high-strength aluminium alloys
Martin, J. H., Yahata, B. D., Hundley, J. M., Mayer, J. A., Schaedler, T. A., & Pollock, T. M. (2017) · Nature · doi:10.1038/nature23894 · Cited by 2,950
A study of the microstructural evolution during selective laser melting of Ti–6Al–4V
Thijs, L., Verhaeghe, F., Craeghs, T., Humbeeck, J. V., & Kruth, J.-P. (2010) · Acta Materialia · doi:10.1016/j.actamat.2010.02.004 · Cited by 2,929
Khairallah, S. A., Anderson, A. T., Rubenchik, A., & King, W. E. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.02.014 · Cited by 2,766
Additively manufactured hierarchical stainless steels with high strength and ductility
Wang, Y. M., Voisin, T., McKeown, J. T., Ye, J., Calta, N. P., Li, Z., Zeng, Z., Zhang, Y., Chen, W., Roehling, T. T., et al. (2018) · Nature Materials · doi:10.1038/nmat5021 · Cited by 2,613
Nickel-Based Superalloys for Advanced Turbine Engines: Chemistry, Microstructure and Properties
Pollock, T. M., & Tin, S. (2006) · Journal of Propulsion and Power · doi:10.2514/1.18239 · Cited by 2,581
The metallurgy and processing science of metal additive manufacturing
Sames, W. J., List, F. A., Pannala, S., Dehoff, R. R., & Babu, S. S. (2016) · International Materials Reviews · doi:10.1080/09506608.2015.1116649 · Cited by 2,529
Additive manufacturing of Ti6Al4V alloy: A review
Liu, S., & Shin, Y. C. (2019) · Materials & Design · doi:10.1016/j.matdes.2018.107552 · Cited by 2,472
Democracy Barometer. Methodology. Version 4.
Merkel, W., Bochsler, D., Bousbah, K., Bühlmann, M., Giebler, H., Hänni, M., Heyne, L., Müller, L., Ruth, S., & Weßels, B. (2004) · Intellectum (Universidad de La Sabana) · doi:10.1007/s13398-014-0173-7.2 · Cited by 2,331
Residual stresses in selective laser sintering and selective laser melting
Mercelis, P., & Kruth, J. (2006) · Rapid Prototyping Journal · doi:10.1108/13552540610707013 · Cited by 2,015
Metal Fatigue in Engineering (1980)
Fuchs, H. O., Stephens, R. I., & Saunders, H. (1981) · Journal of Engineering Materials and Technology · doi:10.1115/1.3225026 · Cited by 1,933
Thijs, L., Kempen, K., Kruth, J.-P., & Van Humbeeck, J. (2013) · Acta Materialia · doi:10.1016/j.actamat.2012.11.052 · Cited by 1,917
Vrancken, B., Thijs, L., Kruth, J.-P., & Van Humbeeck, J. (2012) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2012.07.022 · Cited by 1,896
Olakanmi, E. O., Cochrane, R. F., & Dalgarno, K. W. (2015) · Progress in Materials Science · doi:10.1016/j.pmatsci.2015.03.002 · Cited by 1,742
Metal Additive Manufacturing: A Review of Mechanical Properties
Lewandowski, J. J., & Seifi, M. (2016) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-070115-032024 · Cited by 1,722
Metal Fabrication by Additive Manufacturing Using Laser and Electron Beam Melting Technologies
Murr, L. E., Gaytan, S. M., Ramirez, D. A., Martinez, E., Hernandez, J., Amato, K. N., Shindo, P. W., Medina, F. R., & Wicker, R. B. (2012) · Journal of Materials Science & Technology · doi:10.1016/s1005-0302(12)60016-4 · Cited by 1,686
Observation of keyhole-mode laser melting in laser powder-bed fusion additive manufacturing
King, W. E., Barth, H. D., Castillo, V. M., Gallegos, G. F., Gibbs, J. W., Hahn, D. E., Kamath, C., & Rubenchik, A. M. (2014) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2014.06.005 · Cited by 1,616
Selective laser melting of iron-based powder
Kruth, J. P., Froyen, L., Van Vaerenbergh, J., Mercelis, P., Rombouts, M., & Lauwers, B. (2004) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2003.11.051 · Cited by 1,550
Leuders, S., Thöne, M., Riemer, A., Niendorf, T., Tröster, T., Richard, H. A., & Maier, H. J. (2013) · International Journal of Fatigue · doi:10.1016/j.ijfatigue.2012.11.011 · Cited by 1,475
Review of in-situ process monitoring and in-situ metrology for metal additive manufacturing
Everton, S. K., Hirsch, M., Stravroulakis, P., Leach, R. K., & Clare, A. T. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.01.099 · Cited by 1,469
Consolidation phenomena in laser and powder-bed based layered manufacturing
Kruth, J.-P., Levy, G., Klocke, F., & Childs, T. H. C. (2007) · CIRP Annals · doi:10.1016/j.cirp.2007.10.004 · Cited by 1,444
Computed Tomography: Principles, Design, Artifacts, and Recent Advances
Hsieh, J. (2015) · doi:10.1117/3.2197756 · Cited by 1,400
Vilaro, T., Colin, C., & Bartout, J. D. (2011) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-011-0731-y · Cited by 1,283
Reducing porosity in AlSi10Mg parts processed by selective laser melting
Aboulkhair, N. T., Everitt, N. M., Ashcroft, I., & Tuck, C. (2014) · Additive Manufacturing · doi:10.1016/j.addma.2014.08.001 · Cited by 1,281
King, W. E., Anderson, A. T., Ferencz, R. M., Hodge, N. E., Kamath, C., Khairallah, S. A., & Rubenchik, A. M. (2015) · Applied Physics Reviews · doi:10.1063/1.4937809 · Cited by 1,258
Xu, W., Brandt, M., Sun, S., Elambasseril, J., Liu, Q., Latham, K., Xia, K., & Qian, M. (2015) · Acta Materialia · doi:10.1016/j.actamat.2014.11.028 · Cited by 1,245
Phase transformations during cooling in α+β titanium alloys
Ahmed, T., & Rack, H. J. (1998) · Materials Science and Engineering A · doi:10.1016/s0921-5093(97)00802-2 · Cited by 1,224
Read, N., Wang, W., Essa, K., & Attallah, M. M. (2015) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2014.09.044 · Cited by 1,218
Thompson, S. M., Bian, L., Shamsaei, N., & Yadollahi, A. (2015) · Additive Manufacturing · doi:10.1016/j.addma.2015.07.001 · Cited by 1,179
Self-citationParadox of Strength and Ductility in Metals Processed Bysevere Plastic Deformation
Valiev, R. Z., Alexandrov, I. V., Zhu, Y. T., & Lowe, T. C. (2002) · Journal of Materials Research · doi:10.1557/jmr.2002.0002 · Cited by 1,162
Brandl, E., Heckenberger, U., Holzinger, V., & Buchbinder, D. (2012) · Materials & Design · doi:10.1016/j.matdes.2011.07.067 · Cited by 1,151
Revealing the relationship between grain size and corrosion rate of metals
Ralston, K. D., Birbilis, N., & Davies, C. H. J. (2010) · Scripta Materialia · doi:10.1016/j.scriptamat.2010.08.035 · Cited by 1,141
Dislocation network in additive manufactured steel breaks strength–ductility trade-off
Liu, L., Ding, Q., Zhong, Y., Zou, J., Wu, J., Chiu, Y.-L., Li, J., Zhang, Z., Yu, Q., & Shen, Z. (2018) · Materials Today · doi:10.1016/j.mattod.2017.11.004 · Cited by 1,127
Additive manufacturing of ultrafine-grained high-strength titanium alloys
Zhang, D., Qiu, D., Gibson, M. A., Zheng, Y., Fraser, H. L., StJohn, D. H., & Easton, M. A. (2019) · Nature · doi:10.1038/s41586-019-1783-1 · Cited by 1,127
Shamsaei, N., Yadollahi, A., Bian, L., & Thompson, S. M. (2015) · Additive Manufacturing · doi:10.1016/j.addma.2015.07.002 · Cited by 1,108
Self-citationAdditive manufacturing of metallic components by selective electron beam melting — a review
Körner, C. (2016) · International Materials Reviews · doi:10.1080/09506608.2016.1176289 · Cited by 1,106
Effects of defects, inclusions and inhomogeneities on fatigue strength
MURAKAMI, Y., & Endo, M. (1994) · International Journal of Fatigue · doi:10.1016/0142-1123(94)90001-9 · Cited by 1,102
Single-crystal laser deposition of superalloys: processing–microstructure maps
Gäumann, M., Bezençon, C., Canalis, P., & Kurz, W. (2001) · Acta Materialia · doi:10.1016/s1359-6454(00)00367-0 · Cited by 1,091
Keyhole threshold and morphology in laser melting revealed by ultrahigh-speed x-ray imaging
Cunningham, R., Zhao, C., Parab, N., Kantzos, C., Pauza, J., Fezzaa, K., Sun, T., & Rollett, A. D. (2019) · Science · doi:10.1126/science.aav4687 · Cited by 1,066
Self-citationMechanical Packing of Spherical Particles
McGEARY, R. K. (1961) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.1961.tb13716.x · Cited by 1,044
Qiu, C., Panwisawas, C., Ward, R., Basoalto, H., Brooks, J. W., & Attallah, M. M. (2015) · Acta Materialia · doi:10.1016/j.actamat.2015.06.004 · Cited by 1,041
Gong, H., Rafi, K., Gu, H., Starr, T., & Stucker, B. (2014) · Additive Manufacturing · doi:10.1016/j.addma.2014.08.002 · Cited by 1,038
Sanaei, N., & Fatemi, A. (2021) · Progress in Materials Science · doi:10.1016/j.pmatsci.2020.100724 · Cited by 1,029
Additive manufacturing of fatigue resistant materials: Challenges and opportunities
Yadollahi, A., & Shamsaei, N. (2017) · International Journal of Fatigue · doi:10.1016/j.ijfatigue.2017.01.001 · Cited by 1,023
Self-citationEffect of the build orientation on the mechanical properties and fracture modes of SLM Ti–6Al–4V
Simonelli, M., Tse, Y. Y., & Tuck, C. (2014) · Materials Science and Engineering: A · doi:10.1016/j.msea.2014.07.086 · Cited by 1,010
Mechanical behavior of additive manufactured, powder-bed laser-fused materials
Mower, T. M., & Long, M. J. (2016) · Materials Science and Engineering: A · doi:10.1016/j.msea.2015.10.068 · Cited by 1,001
Murr, L. E., Quinones, S. A., Gaytan, S. M., Lopez, M. I., Rodela, A., Martinez, E. Y., Hernandez, D. H., Martinez, E., Medina, F., & Wicker, R. B. (2009) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2008.05.004 · Cited by 997
Liverani, E., Toschi, S., Ceschini, L., & Fortunato, A. (2017) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2017.05.042 · Cited by 990
Rafi, H. K., Karthik, N. V., Gong, H., Starr, T. L., & Stucker, B. E. (2013) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-013-0658-0 · Cited by 987
Selective laser melting of biocompatible metals for rapid manufacturing of medical parts
Vandenbroucke, B., & Kruth, J. (2007) · Rapid Prototyping Journal · doi:10.1108/13552540710776142 · Cited by 981
Material Failure by Void Growth to Coalescence
Tvergaard, V. (1989) · Advances in Applied Mechanics · doi:10.1016/s0065-2156(08)70195-9 · Cited by 972
High Temperature Oxidation and Corrosion of Metals
(2016) · Elsevier eBooks · doi:10.1016/c2014-0-00259-6 · Cited by 957
Gong, H., Rafi, K., Gu, H., Janaki Ram, G. D., Starr, T., & Stucker, B. (2015) · Materials & Design · doi:10.1016/j.matdes.2015.07.147 · Cited by 940
Selective laser melting of aluminium components
Louvis, E., Fox, P., & Sutcliffe, C. J. (2011) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2010.09.019 · Cited by 933
Gorsse, S., Hutchinson, C., Gouné, M., & Banerjee, R. (2017) · Science and Technology of Advanced Materials · doi:10.1080/14686996.2017.1361305 · Cited by 920
Jia, Q., & Gu, D. (2014) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2013.09.171 · Cited by 905
Material issues in additive manufacturing: A review
Singh, S., Ramakrishna, S., & Singh, R. (2017) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2016.11.006 · Cited by 899
A Point Defect Model for Anodic Passive Films: I . Film Growth Kinetics
Chao, C. Y., Lin, L. F., & Macdonald, D. D. (1981) · Journal of The Electrochemical Society · doi:10.1149/1.2127591 · Cited by 894
Surface roughness analysis, modelling and prediction in selective laser melting
Strano, G., Hao, L., Everson, R. M., & Evans, K. E. (2013) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2012.11.011 · Cited by 876
Fatigue performance evaluation of selective laser melted Ti–6Al–4V
Edwards, P., & Ramulu, M. (2014) · Materials Science and Engineering: A · doi:10.1016/j.msea.2014.01.041 · Cited by 874
Al-Bermani, S. S., Blackmore, M., Zhang, W., & Todd, I. (2010) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-010-0397-x · Cited by 860
A review of mechanical properties of additively manufactured Inconel 718
Hosseini, E., & Popovich, V. (2019) · Additive manufacturing · doi:10.1016/j.addma.2019.100877 · Cited by 856
Mechanical Properties of AlSi10Mg Produced by Selective Laser Melting
Kempen, K., Thijs, L., Van Humbeeck, J., & Kruth, J.-P. (2012) · Physics Procedia · doi:10.1016/j.phpro.2012.10.059 · Cited by 849
Process defects and in situ monitoring methods in metal powder bed fusion: a review
Grasso, M., & Colosimo, B. M. (2017) · Measurement Science and Technology · doi:10.1088/1361-6501/aa5c4f · Cited by 833
Origin of dislocation structures in an additively manufactured austenitic stainless steel 316L
Bertsch, K. M., de Bellefon, G. M., Kuehl, B., & Thoma, D. J. (2020) · Acta Materialia · doi:10.1016/j.actamat.2020.07.063 · Cited by 832
Single track formation in selective laser melting of metal powders
Yadroitsev, I., Gusarov, A., Yadroitsava, I., & Smurov, I. (2010) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2010.05.010 · Cited by 827
Kasperovich, G., Haubrich, J., Gussone, J., & Requena, G. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.05.070 · Cited by 818
In situ X-ray imaging of defect and molten pool dynamics in laser additive manufacturing
Leung, C. L. A., Marussi, S., Atwood, R. C., Towrie, M., Withers, P. J., & Lee, P. D. (2018) · Nature Communications · doi:10.1038/s41467-018-03734-7 · Cited by 817
An improved prediction of residual stresses and distortion in additive manufacturing
Mukherjee, T., Zhang, W., & DebRoy, T. (2017) · Computational Materials Science · doi:10.1016/j.commatsci.2016.10.003 · Cited by 812
Denudation of metal powder layers in laser powder bed fusion processes
Matthews, M. J., Guss, G., Khairallah, S. A., Rubenchik, A. M., Depond, P. J., & King, W. E. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.05.017 · Cited by 809
Prashanth, K. G., Scudino, S., Klauss, H. J., Surreddi, K. B., Löber, L., Wang, Z., Chaubey, A. K., Kühn, U., & Eckert, J. (2014) · Materials Science and Engineering: A · doi:10.1016/j.msea.2013.10.023 · Cited by 803
Hardened austenite steel with columnar sub-grain structure formed by laser melting
Saeidi, K., Gao, X., Zhong, Y., & Shen, Z. J. (2015) · Materials Science and Engineering: A · doi:10.1016/j.msea.2014.12.018 · Cited by 796
On the limitations of Volumetric Energy Density as a design parameter for Selective Laser Melting
Scipioni Bertoli, U., Wolfer, A. J., Matthews, M. J., Delplanque, J.-P. R., & Schoenung, J. M. (2017) · Materials & Design · doi:10.1016/j.matdes.2016.10.037 · Cited by 796
Chlebus, E., Gruber, K., Kuźnicka, B., Kurzac, J., & Kurzynowski, T. (2015) · Materials Science and Engineering A · doi:10.1016/j.msea.2015.05.035 · Cited by 787
Fundamental aspects of hot isostatic pressing: An overview
Atkinson, H. V., & Davies, S. (2000) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-000-0078-2 · Cited by 784
The physics of fatigue crack initiation
Sangid, M. D. (2013) · International Journal of Fatigue · doi:10.1016/j.ijfatigue.2012.10.009 · Cited by 768
Zhao, C., Fezzaa, K., Cunningham, R. W., Wen, H., De Carlo, F., Chen, L., Rollett, A. D., & Sun, T. (2017) · Scientific Reports · doi:10.1038/s41598-017-03761-2 · Cited by 758
Self-citationCarter, L. N., Martin, C., Withers, P. J., & Attallah, M. M. (2014) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2014.06.172 · Cited by 751
Surface texture metrology for metal additive manufacturing: a review
Townsend, A., Senin, N., Blunt, L., Leach, R. K., & Taylor, J. S. (2016) · Precision Engineering · doi:10.1016/j.precisioneng.2016.06.001 · Cited by 743
Parry, L., Ashcroft, I. A., & Wildman, R. D. (2016) · Additive Manufacturing · doi:10.1016/j.addma.2016.05.014 · Cited by 739
Mechanical behavior of materials
(2009) · Choice Reviews Online · doi:10.5860/choice.46-6830 · Cited by 737
Improvement of fatigue resistance and ductility of TiAl6V4 processed by selective laser melting
Kasperovich, G., & Hausmann, J. (2015) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2015.01.025 · Cited by 735
Evaluations of cellular lattice structures manufactured using selective laser melting
Yan, C., Hao, L., Hussein, A., & Raymont, D. (2012) · International Journal of Machine Tools and Manufacture · doi:10.1016/j.ijmachtools.2012.06.002 · Cited by 730
Zhang, D., Niu, W., Cao, X., & Liu, Z. (2015) · Materials Science and Engineering: A · doi:10.1016/j.msea.2015.06.021 · Cited by 723
Balling behavior of stainless steel and nickel powder during selective laser melting process
Li, R., Liu, J., Shi, Y., Wang, L., & Jiang, W. (2012) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-011-3566-1 · Cited by 722
Selective laser melting of stainless steel 316L with low porosity and high build rates
Sun, Z., Tan, X., Tor, S. B., & Yeong, W. Y. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.05.035 · Cited by 714
A Review on Process Monitoring and Control in Metal-Based Additive Manufacturing
Tapia, G., & Elwany, A. (2014) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4028540 · Cited by 711
Dynamics of pore formation during laser powder bed fusion additive manufacturing
Martin, A. A., Calta, N. P., Khairallah, S. A., Wang, J., Depond, P. J., Fong, A. Y., Thampy, V., Guss, G. M., Kiss, A. M., Stone, K. H., et al. (2019) · Nature Communications · doi:10.1038/s41467-019-10009-2 · Cited by 711
Melt pool temperature and cooling rates in laser powder bed fusion
Hooper, P. A. (2018) · Additive Manufacturing · doi:10.1016/j.addma.2018.05.032 · Cited by 707
Harrison, N. J., Todd, I., & Mumtaz, K. (2015) · Acta Materialia · doi:10.1016/j.actamat.2015.04.035 · Cited by 690
Xu, W., Lui, E. W., Pateras, A., Qian, M., & Brandt, M. (2017) · Acta Materialia · doi:10.1016/j.actamat.2016.12.027 · Cited by 687
Tucho, W. M., Cuvillier, P., Sjolyst-Kverneland, A., & Hansen, V. F. (2017) · Materials Science and Engineering A · doi:10.1016/j.msea.2017.02.062 · Cited by 682
Alloys-by-design: Application to new superalloys for additive manufacturing
Tang, Y. T., Panwisawas, C., Ghoussoub, J. N., Gong, Y., Clark, J. W. G., Németh, A. A. N., McCartney, D. G., & Reed, R. C. (2021) · Acta Materialia · doi:10.1016/j.actamat.2020.09.023 · Cited by 678
Aboulkhair, N. T., Maskery, I., Tuck, C., Ashcroft, I., & Everitt, N. M. (2016) · Materials Science and Engineering: A · doi:10.1016/j.msea.2016.04.092 · Cited by 675
Zhao, X., Li, S., Zhang, M., Liu, Y., Sercombe, T. B., Wang, S., Hao, Y., Yang, R., & Murr, L. E. (2016) · Materials & Design · doi:10.1016/j.matdes.2015.12.135 · Cited by 673
Critical instability at moving keyhole tip generates porosity in laser melting
Zhao, C., Parab, N. D., Li, X., Fezzaa, K., Tan, W., Rollett, A. D., & Sun, T. (2020) · Science · doi:10.1126/science.abd1587 · Cited by 673
Self-citationGu, D., & Shen, Y. (2009) · Materials & Design · doi:10.1016/j.matdes.2009.01.013 · Cited by 672
Investigations on residual stresses and deformations in selective laser melting
Zaeh, M. F., & Branner, G. (2010) · Production Engineering · doi:10.1007/s11740-009-0192-y · Cited by 666
A Point Defect Model for Anodic Passive Films: II . Chemical Breakdown and Pit Initiation
Lin, L. F., Chao, C. Y., & Macdonald, D. D. (1981) · Journal of The Electrochemical Society · doi:10.1149/1.2127592 · Cited by 664
Wu, A. S., Brown, D. W., Kumar, M., Gallegos, G. F., & King, W. E. (2014) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-014-2549-x · Cited by 657
Li, X. P., Wang, X. J., Saunders, M., Suvorova, A., Zhang, L. C., Liu, Y. J., Fang, M. H., Huang, Z. H., & Sercombe, T. B. (2015) · Acta Materialia · doi:10.1016/j.actamat.2015.05.017 · Cited by 654
Yadollahi, A., Shamsaei, N., Thompson, S. M., & Seely, D. W. (2015) · Materials Science and Engineering: A · doi:10.1016/j.msea.2015.07.056 · Cited by 650
Self-citationBeretta, S., & Romano, S. (2017) · International Journal of Fatigue · doi:10.1016/j.ijfatigue.2016.06.020 · Cited by 635
Overview of Materials Qualification Needs for Metal Additive Manufacturing
Seifi, M., Salem, A., Beuth, J., Harrysson, O., & Lewandowski, J. J. (2016) · JOM · doi:10.1007/s11837-015-1810-0 · Cited by 630
Chauvet, E., Kontis, P., Jägle, E. A., Gault, B., Raabe, D., Tassin, C., Blandin, J., Dendievel, R., Vayre, B., Abed, S., et al. (2017) · Acta Materialia · doi:10.1016/j.actamat.2017.09.047 · Cited by 629
Physical processes in fusion welding
DebRoy, T., & David, S. A. (1995) · Reviews of Modern Physics · doi:10.1103/revmodphys.67.85 · Cited by 626
Prediction of lack-of-fusion porosity for powder bed fusion
Tang, M., Pistorius, P. C., & Beuth, J. L. (2017) · Additive Manufacturing · doi:10.1016/j.addma.2016.12.001 · Cited by 620
Revisiting fundamental welding concepts to improve additive manufacturing: From theory to practice
Oliveira, J. P., Santos, T. G., & Miranda, R. M. (2020) · Progress in Materials Science · doi:10.1016/j.pmatsci.2019.100590 · Cited by 617
Mesoscopic simulation model of selective laser melting of stainless steel powder
Khairallah, S. A., & Anderson, A. (2014) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2014.06.001 · Cited by 616
An overview of residual stresses in metal powder bed fusion
Bartlett, J. L., & Li, X. (2019) · Additive Manufacturing · doi:10.1016/j.addma.2019.02.020 · Cited by 616
Spierings, A. B., Herres, N., & Levy, G. (2011) · Rapid Prototyping Journal · doi:10.1108/13552541111124770 · Cited by 614
Comparison of density measurement techniques for additive manufactured metallic parts
Spierings, A. B., Schneider, M., & Eggenberger, R. (2011) · Rapid Prototyping Journal · doi:10.1108/13552541111156504 · Cited by 613
Yadollahi, A., Shamsaei, N., Thompson, S. M., Elwany, A., & Bian, L. (2017) · International Journal of Fatigue · doi:10.1016/j.ijfatigue.2016.03.014 · Cited by 609
Self-citationMicrostructure-sensitive computational modeling of fatigue crack formation
McDowell, D. L., & Dunne, F. P. E. (2010) · International Journal of Fatigue · doi:10.1016/j.ijfatigue.2010.01.003 · Cited by 602
Baufeld, B., der Biest, O. V., & Gault, R. (2009) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2009.11.032 · Cited by 601
Residual Stress within Metallic Model Made by Selective Laser Melting Process
Shiomi, M., Osakada, K., Nakamura, K., Yamashita, T., & Abe, F. (2004) · CIRP Annals · doi:10.1016/s0007-8506(07)60677-5 · Cited by 591
Tammas-Williams, S., Zhao, H., Léonard, F., Derguti, F., Todd, I., & Prangnell, P. B. (2015) · Materials Characterization · doi:10.1016/j.matchar.2015.02.008 · Cited by 590
Changing the alloy composition of Al7075 for better processability by selective laser melting
Montero-Sistiaga, M. L., Mertens, R., Vrancken, B., Wang, X., Hooreweder, B. V., Kruth, J., & Humbeeck, J. V. (2016) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2016.08.003 · Cited by 590
Formation and reduction of hydrogen porosity during selective laser melting of AlSi10Mg
Weingarten, C., Buchbinder, D., Pirch, N., Meiners, W., Wissenbach, K., & Poprawe, R. (2015) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2015.02.013 · Cited by 585
Liu, Y. J., Li, S. J., Wang, H. L., Hou, W. T., Hao, Y. L., Yang, R., Sercombe, T. B., & Zhang, L. C. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.04.029 · Cited by 584
Microstructure and strength of selectively laser melted AlSi10Mg
Wu, J. B., Wang, X. Q., Wang, W., Attallah, M. M., & Loretto, M. H. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.07.012 · Cited by 581
Popovich, V., Borisov, E. V., Popovich, A., Sufiiarov, V. S., Masaylo, D. V., & Alzina, L. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.10.075 · Cited by 580
Corrosion behavior of selective laser melted Ti-6Al-4 V alloy in NaCl solution
Dai, N., Zhang, L.-C., Zhang, J., Chen, Q., & Wu, M. (2016) · Corrosion Science · doi:10.1016/j.corsci.2015.10.041 · Cited by 570
Zhang, H., Zhu, H., Qi, T., Hu, Z., & Zeng, X. (2016) · Materials Science and Engineering A · doi:10.1016/j.msea.2015.12.101 · Cited by 565
Murr, L. E., Esquivel, E. V., Quinones, S. A., Gaytan, S. M., Lopez, M. I., Martinez, E. Y., Medina, F., Hernandez, D. H., Martinez, E., Martinez, J. L., et al. (2009) · Materials Characterization · doi:10.1016/j.matchar.2008.07.006 · Cited by 564
Trosch, T., Strößner, J., Völkl, R., & Glatzel, U. (2016) · Materials Letters · doi:10.1016/j.matlet.2015.10.136 · Cited by 556
Dehoff, R. R., Kirka, M. M., Sames, W. J., Bilheux, H., Tremsin, A. S., Lowe, L. E., & Babu, S. S. (2015) · Materials Science and Technology · doi:10.1179/1743284714y.0000000734 · Cited by 555
Fluid and particle dynamics in laser powder bed fusion
Bidare, P., Bitharas, I., Ward, R. M., Attallah, M. M., & Moore, A. J. (2018) · Acta Materialia · doi:10.1016/j.actamat.2017.09.051 · Cited by 555
Vrancken, B., Thijs, L., Kruth, J.-P., & Van Humbeeck, J. (2014) · Acta Materialia · doi:10.1016/j.actamat.2014.01.018 · Cited by 553
Li, P., Warner, D. H., Fatemi, A., & Phan, N. (2016) · International Journal of Fatigue · doi:10.1016/j.ijfatigue.2015.12.003 · Cited by 546
Casati, R., Lemke, J., & Vedani, M. (2016) · Journal of Materials Science & Technology · doi:10.1016/j.jmst.2016.06.016 · Cited by 542
Powder Bed Fusion of nickel-based superalloys: A review
Sanchez, S., Smith, P., Xu, Z., Gaspard, G., Hyde, C. J., Wits, W. W., Ashcroft, I. A., Chen, H., & Clare, A. T. (2021) · International Journal of Machine Tools and Manufacture · doi:10.1016/j.ijmachtools.2021.103729 · Cited by 541
Masuo, H., Tanaka, Y., Morokoshi, S., Yagura, H., Uchida, T., Yamamoto, Y., & Murakami, Y. (2018) · International Journal of Fatigue · doi:10.1016/j.ijfatigue.2018.07.020 · Cited by 539
Baufeld, B., Brandl, E., & der Biest, O. V. (2011) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2011.01.018 · Cited by 537
Kruth, J.-P., Deckers, J., Yasa, E., & Wauthlé, R. (2012) · Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture · doi:10.1177/0954405412437085 · Cited by 532
Mechanistic models for additive manufacturing of metallic components
Wei, H. L., Mukherjee, T., Zhang, W., Zuback, J. S., Knapp, G. L., De, A., & DebRoy, T. (2021) · Progress in Materials Science · doi:10.1016/j.pmatsci.2020.100703 · Cited by 530
Modeling metal deposition in heat transfer analyses of additive manufacturing processes
Michaleris, P. (2014) · Finite Elements in Analysis and Design · doi:10.1016/j.finel.2014.04.003 · Cited by 527
Murr, L. E., Gaytan, S. M., Ceylan, A., Martinez, E., Martinez, J. L., Hernandez, D. H., Machado, B. I., Ramirez, D. A., Medina, F., Collins, S., et al. (2010) · Acta Materialia · doi:10.1016/j.actamat.2009.11.032 · Cited by 526
Printability of alloys for additive manufacturing
Mukherjee, T., Zuback, J. S., De, A., & DebRoy, T. (2016) · Scientific Reports · doi:10.1038/srep19717 · Cited by 523
Nickel based superalloy welding practices for industrial gas turbine applications
Henderson, M. B., Arrell, D. J., Larsson, R., Heobel, M., & Marchant, G. (2004) · Science and Technology of Welding & Joining · doi:10.1179/136217104225017099 · Cited by 522
X-ray computed tomography for additive manufacturing: a review
Thompson, A., Maskery, I., & Leach, R. K. (2016) · Measurement Science and Technology · doi:10.1088/0957-0233/27/7/072001 · Cited by 521
Ly, S., Rubenchik, A. M., Khairallah, S. A., Guss, G. M., & Matthews, M. J. (2017) · Scientific Reports · doi:10.1038/s41598-017-04237-z · Cited by 521
Romano, S., Brückner-Foit, A., Brandão, A., Gumpinger, J., Ghidini, T., & Beretta, S. (2018) · Engineering Fracture Mechanics · doi:10.1016/j.engfracmech.2017.11.002 · Cited by 521
Absorptance of powder materials suitable for laser sintering
Tolochko, N. K., Khlopkov, Y. V., Mozzharov, S. E., Ignatiev, M. B., Laoui, T., & Titov, V. I. (2000) · Rapid Prototyping Journal · doi:10.1108/13552540010337029 · Cited by 518
Recent advances in X-ray microtomography applied to materials
Stock, S. R. (2008) · International Materials Reviews · doi:10.1179/174328008x277803 · Cited by 517
Ductility of a Ti‐6Al‐4V alloy produced by selective laser melting of prealloyed powders
Facchini, L., Magalini, E., Robotti, P., Molinari, A., Höges, S., & Wissenbach, K. (2010) · Rapid Prototyping Journal · doi:10.1108/13552541011083371 · Cited by 512
Trapp, J., Rubenchik, A. M., Guss, G., & Matthews, M. J. (2017) · Applied Materials Today · doi:10.1016/j.apmt.2017.08.006 · Cited by 509
Characterization of Metal Powders Used for Additive Manufacturing
Slotwinski, J. A., Garboczi, E. J., Stutzman, P. E., Ferraris, C. F., Watson, S. S., & Peltz, M. A. (2014) · Journal of Research of the National Institute of Standards and Technology · doi:10.6028/jres.119.018 · Cited by 506
Controlling interdependent meso-nanosecond dynamics and defect generation in metal 3D printing
Khairallah, S. A., Martin, A. A., Lee, J. R. I., Guss, G., Calta, N. P., Hammons, J. A., Nielsen, M. H., Chaput, K., Schwalbach, E., Shah, M. N., et al. (2020) · Science · doi:10.1126/science.aay7830 · Cited by 506
Stress and deformation evaluations of scanning strategy effect in selective laser melting
Cheng, B., Shrestha, S., & Chou, K. (2016) · Additive Manufacturing · doi:10.1016/j.addma.2016.05.007 · Cited by 504
Powders for powder bed fusion: a review
Vock, S., Klöden, B., Kirchner, A., Weißgärber, T., & Kieback, B. (2019) · Progress in Additive Manufacturing · doi:10.1007/s40964-019-00078-6 · Cited by 500
Liu, Y., Yang, Y., Mai, S., Wang, D., & Song, C. (2015) · Materials & Design · doi:10.1016/j.matdes.2015.08.086 · Cited by 498
The Influence of Porosity on Fatigue Crack Initiation in Additively Manufactured Titanium Components
Tammas-Williams, S., Withers, P. J., Todd, I., & Prangnell, P. B. (2017) · Scientific Reports · doi:10.1038/s41598-017-06504-5 · Cited by 494
Cloots, M., Uggowitzer, P. J., & Wegener, K. (2015) · Materials & Design · doi:10.1016/j.matdes.2015.10.027 · Cited by 492
Uriondo, A., Esperon-Miguez, M., & Perinpanayagam, S. (2015) · Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering · doi:10.1177/0954410014568797 · Cited by 489
Scime, L., & Beuth, J. (2018) · Additive Manufacturing · doi:10.1016/j.addma.2017.11.009 · Cited by 489
Kurzynowski, T., Gruber, K., Stopyra, W., Kuźnicka, B., & Chlebus, E. (2018) · Materials Science and Engineering: A · doi:10.1016/j.msea.2018.01.103 · Cited by 489
Oxides, porosity and fatigue performance of AlSi10Mg parts produced by selective laser melting
Ming, T., & Pistorius, P. C. (2016) · International Journal of Fatigue · doi:10.1016/j.ijfatigue.2016.06.002 · Cited by 487
Biamino, S., Penna, A., Ackelid, U., Sabbadini, S., Tassa, O., Fino, P., Pavese, M., Gennaro, P., & Badini, C. (2011) · Intermetallics · doi:10.1016/j.intermet.2010.11.017 · Cited by 486
Tang, H. P., Qian, M., Liu, N., Zhang, X. Z., Yang, G. Y., & Wang, J. (2015) · JOM · doi:10.1007/s11837-015-1300-4 · Cited by 483
Zhang, H., Zhu, H., Nie, X., Yin, J., Hu, Z., & Zeng, X. (2017) · Scripta Materialia · doi:10.1016/j.scriptamat.2017.02.036 · Cited by 477
Fatigue life of additively manufactured Ti–6Al–4V in the very high cycle fatigue regime
Günther, J., Krewerth, D., Lippmann, T., Leuders, S., Tröster, T., Weidner, A., Biermann, H., & Niendorf, T. (2017) · International Journal of Fatigue · doi:10.1016/j.ijfatigue.2016.05.018 · Cited by 475
Li, R., Shi, Y., Wang, Z., Wang, L., Liu, J., & Jiang, W. (2010) · Applied Surface Science · doi:10.1016/j.apsusc.2010.02.030 · Cited by 473
Rai, R., Elmer, J. W., Palmer, T. A., & DebRoy, T. (2007) · Journal of Physics D Applied Physics · doi:10.1088/0022-3727/40/18/037 · Cited by 473
Influence of process parameters on surface roughness of aluminum parts produced by DMLS
Calignano, F., Manfredi, D., Ambrosio, E. P., Iuliano, L., & Fino, P. (2013) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-012-4688-9 · Cited by 469
Keller, T., Lindwall, G., Ghosh, S., Ma, L., Lane, B. M., Zhang, F., Kattner, U. R., Lass, E. A., Heigel, J. C., Idell, Y., et al. (2017) · Acta Materialia · doi:10.1016/j.actamat.2017.05.003 · Cited by 457
Mesoscopic simulation of selective beam melting processes
Körner, C., Attar, E., & Heinl, P. (2011) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2010.12.016 · Cited by 450
Electron Beam Additive Manufacturing of Titanium Components: Properties and Performance
Edwards, P., O'Conner, A., & Ramulu, M. (2013) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4025773 · Cited by 450
Gobert, C., Reutzel, E. W., Petrich, J., Nassar, A. R., & Phoha, S. (2018) · Additive Manufacturing · doi:10.1016/j.addma.2018.04.005 · Cited by 447
Heigel, J. C., Michaleris, P., & Reutzel, E. W. (2015) · Additive Manufacturing · doi:10.1016/j.addma.2014.10.003 · Cited by 438
Pore elimination mechanisms during 3D printing of metals
Hojjatzadeh, S. M. H., Parab, N. D., Yan, W., Guo, Q., Xiong, L., Zhao, C., Qu, M., Escano, L. I., Xiao, X., Fezzaa, K., et al. (2019) · Nature Communications · doi:10.1038/s41467-019-10973-9 · Cited by 438
Self-citationMicrostructure and texture evolution during solidification processing of Ti–6Al–4V
Kobryn, P. A., & Semiatin, S. L. (2003) · Journal of Materials Processing Technology · doi:10.1016/s0924-0136(02)00865-8 · Cited by 433
Top surface and side roughness of Inconel 625 parts processed using selective laser melting
Mumtaz, K., & Hopkinson, N. (2009) · Rapid Prototyping Journal · doi:10.1108/13552540910943397 · Cited by 429
Kobryn, P. A., Moore, E. H., & Semiatin, S. L. (2000) · Scripta Materialia · doi:10.1016/s1359-6462(00)00408-5 · Cited by 428
Fatigue performance of additive manufactured metallic parts
Spierings, A. B., Starr, T. L., & Wegener, K. (2013) · Rapid Prototyping Journal · doi:10.1108/13552541311302932 · Cited by 426
Microstructure and mechanical behaviour of Ti―6Al―7Nb alloy produced by selective laser melting
Chlebus, E., Kuźnicka, B., Kurzynowski, T., & Dybała, B. (2011) · Materials Characterization · doi:10.1016/j.matchar.2011.03.006 · Cited by 423
Seifi, M., Gorelik, M., Waller, J., Hrabe, N., Shamsaei, N., Daniewicz, S., & Lewandowski, J. J. (2017) · JOM · doi:10.1007/s11837-017-2265-2 · Cited by 422
Self-citationPrinciples of Laser Materials Processing
Kannatey‐Asibu, E. (2008) · Wiley eBooks · doi:10.1002/9780470459300 · Cited by 418
Bayat, M., Dong, W. Y., Thorborg, J., To, A. C., & Hattel, J. H. (2021) · Additive manufacturing · doi:10.1016/j.addma.2021.102278 · Cited by 415
Microstructural evolution of a Ti–6Al–4V alloy during thermomechanical processing
Ding, R., Guo, Z. X., & Wilson, A. (2002) · Materials Science and Engineering: A · doi:10.1016/s0921-5093(01)01531-3 · Cited by 413
Scipioni Bertoli, U., Guss, G., Wu, S., Matthews, M. J., & Schoenung, J. M. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.09.044 · Cited by 412
Bermingham, M. J., Kent, D., Zhan, H., StJohn, D. H., & Dargusch, M. S. (2015) · Acta Materialia · doi:10.1016/j.actamat.2015.03.035 · Cited by 411
Guo, Q., Zhao, C., Escano, L. I., Young, Z., Xiong, L., Fezzaa, K., Everhart, W., Brown, B., Sun, T., & Chen, L. (2018) · Acta Materialia · doi:10.1016/j.actamat.2018.03.036 · Cited by 409
Self-citationPorosity Measurements and Analysis for Metal Additive Manufacturing Process Control
Slotwinski, J. A., Garboczi, E. J., & Hebenstreit, K. M. (2014) · Journal of Research of the National Institute of Standards and Technology · doi:10.6028/jres.119.019 · Cited by 408
Tan, J. H., Wong, W. L. E., & Dalgarno, K. W. (2017) · Additive Manufacturing · doi:10.1016/j.addma.2017.10.011 · Cited by 407
A model of deep penetration laser welding based on calculation of the keyhole profile
Kaplan, A. F. H. (1994) · Journal of Physics D Applied Physics · doi:10.1088/0022-3727/27/9/002 · Cited by 406
The influence of additive manufacturing processing parameters on surface roughness and fatigue life
Gockel, J., Sheridan, L., Koerper, B., & Whip, B. (2019) · International Journal of Fatigue · doi:10.1016/j.ijfatigue.2019.03.025 · Cited by 405
Kimura, T., & Nakamoto, T. (2016) · Materials & Design · doi:10.1016/j.matdes.2015.10.065 · Cited by 404
Shevchik, S. A., Kenel, C., Leinenbach, C., & Wasmer, K. (2018) · Additive Manufacturing · doi:10.1016/j.addma.2017.11.012 · Cited by 403
Balling phenomena in selective laser melted tungsten
Zhou, X., Liu, X., Zhang, D., Shen, Z., & Liu, W. (2015) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2015.02.032 · Cited by 399
Popovich, V., Borisov, E. V., Popovich, A., Sufiiarov, V. S., Masaylo, D. V., & Alzina, L. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.05.065 · Cited by 399
Sander, G., Thomas, S., Cruz, V., Jurg, M., Birbilis, N., Gao, X., Brameld, M., & Hutchinson, C. R. (2017) · Journal of The Electrochemical Society · doi:10.1149/2.0551706jes · Cited by 398
Cited by
Mostafaei, A., Ghiaasiaan, R., Ho, I.-T., Strayer, S., Chang, K.-C., Shamsaei, N., Shao, S., Paul, S., Yeh, A.-C., Tin, S., et al. (2023) · Progress in Materials Science · doi:10.1016/j.pmatsci.2023.101108 · Cited by 531
Self-citationGrain refinement of magnesium alloys by dynamic recrystallization (DRX): A review
Mirzadeh, H. (2023) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2023.07.150 · Cited by 354
A review of various materials for additive manufacturing: Recent trends and processing issues
Srivastava, M., Rathee, S., Patel, V., Kumar, A., & Koppad, P. G. (2022) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2022.10.015 · Cited by 311
Mukherjee, T., Elmer, J. W., Wei, H. L., Lienert, T. J., Zhang, W., Kou, S., & DebRoy, T. (2023) · Progress in Materials Science · doi:10.1016/j.pmatsci.2023.101153 · Cited by 267
Metadata
- Authors
- Mostafaei, A., Zhao, C., He, Y., Reza Ghiaasiaan, S., Shi, B., Shao, S., Shamsaei, N., Wu, Z., Kouraytem, N., Sun, T., Pauza, J., Gordon, J. V., Webler, B., Parab, N. D., Asherloo, M., Guo, Q., Chen, L., & Rollett, A. D.
- Venue
- Current Opinion in Solid State and Materials Science
- Publisher
- Elsevier BV
- Published
- 2022-04
- Volume
- 26
- Issue
- 2
- Pages
- 100974
- ISSN
- 1359-0286 (ISSN-L)
- OpenAlex
- W4206945023
- Cited by
- 491
- References
- 621
- FWCI
- 8.07
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.