The DOI matches its Crossref record; 38 of the 38 references it cites were found in a registry or an index.
The synergetic effect of lithium polysulfide and lithium nitrate to prevent lithium dendrite growth
Open accessAbstract
Lithium metal has shown great promise as an anode material for high-energy storage systems, owing to its high theoretical specific capacity and low negative electrochemical potential. Unfortunately, uncontrolled dendritic and mossy lithium growth, as well as electrolyte decomposition inherent in lithium metal-based batteries, cause safety issues and low Coulombic efficiency. Here we demonstrate that the growth of lithium dendrites can be suppressed by exploiting the reaction between lithium and lithium polysulfide, which has long been considered as a critical flaw in lithium–sulfur batteries. We show that a stable and uniform solid electrolyte interphase layer is formed due to a synergetic effect of both lithium polysulfide and lithium nitrate as additives in ether-based electrolyte, preventing dendrite growth and minimizing electrolyte decomposition. Our findings allow for re-evaluation of the reactions regarding lithium polysulfide, lithium nitrate and lithium metal, and provide insights into solving the problems associated with lithium metal anodes. Lithium dendrite growth is a serious hazard in battery operations. Here, the authors show that when using lithium polysulfide and lithium nitrate as additives in ether-based electrolyte, a stable and uniform solid electrolyte interphase forms on the lithium surface, which prevents dendrite growth.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Handbook of X-Ray Photoelectron Spectroscopy
Moulder, J. F., Chastain, J., & King, R. C. (1995) · Medical Entomology and Zoology · Cited by 27,259
Issues and challenges facing rechargeable lithium batteries
Tarascon, J.-M., & Armand, M. (2001) · Nature · doi:10.1038/35104644 · Cited by 21,130
Armand, M., & Tarascon, J.-M. (2008) · Nature · doi:10.1038/451652a · Cited by 19,612
Opportunities and challenges for a sustainable energy future
Chu, S., & Majumdar, A. (2012) · Nature · doi:10.1038/nature11475 · Cited by 12,550
Li-O2 and Li-S batteries with high energy storage
Bruce, P. G., Freunberger, S. A., Hardwick, L. J., & Tarascon, J.-M. (2012) · Nature Materials · doi:10.1038/nmat3191 · Cited by 9,479
A lithium superionic conductor
Kamaya, N., Homma, K., Yamakawa, Y., Hirayama, M., Kanno, R., Yonemura, M., Kamiyama, T., Kato, Y., Hama, S., Kawamoto, K., et al. (2011) · Nature Materials · doi:10.1038/nmat3066 · Cited by 4,978
Lithium metal anodes for rechargeable batteries
Xu, W., Wang, J., Ding, F., Chen, X., Nasybulin, E., Zhang, Y., & Zhang, J.-G. (2014) · Energy Environ. Sci. · doi:10.1039/c3ee40795k · Cited by 4,704
Nanocomposite polymer electrolytes for lithium batteries
Croce, F., Appetecchi, G. B., Persi, L., & Scrosati, B. (1998) · Nature · doi:10.1038/28818 · Cited by 3,205
Peled, E. (1979) · Journal of The Electrochemical Society · doi:10.1149/1.2128859 · Cited by 2,899
Challenges and Prospects of Lithium–Sulfur Batteries
Manthiram, A., Fu, Y., & Su, Y.-S. (2013) · Accounts of Chemical Research · doi:10.1021/ar300179v · Cited by 2,380
Cited by
Reviving the lithium metal anode for high-energy batteries
Lin, D., Liu, Y., & Cui, Y. (2017) · Nature Nanotechnology · doi:10.1038/nnano.2017.16 · Cited by 6,763
Toward Safe Lithium Metal Anode in Rechargeable Batteries: A Review
Cheng, X.-B., Zhang, R., Zhao, C.-Z., & Zhang, Q. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00115 · Cited by 6,197
Designing high-energy lithium–sulfur batteries
Seh, Z. W., Sun, Y., Zhang, Q., & Cui, Y. (2016) · Chemical Society Reviews · doi:10.1039/c5cs00410a · Cited by 2,573
Self-citationGuidelines and trends for next-generation rechargeable lithium and lithium-ion batteries
Wu, F., Maier, J., & Yu, Y. (2020) · Chemical Society Reviews · doi:10.1039/c7cs00863e · Cited by 2,229
Albertus, P., Babinec, S., Litzelman, S., & Newman, A. (2017) · Nature Energy · doi:10.1038/s41560-017-0047-2 · Cited by 1,888
Lin, D., Liu, Y., Liang, Z., Lee, H.-W., Sun, J., Wang, H., Yan, K., Xie, J., & Cui, Y. (2016) · Nature Nanotechnology · doi:10.1038/nnano.2016.32 · Cited by 1,798
Self-citationA Review of Solid Electrolyte Interphases on Lithium Metal Anode
Cheng, X., Zhang, R., Zhao, C., Wei, F., Zhang, J., & Zhang, Q. (2016) · Advanced Science · doi:10.1002/advs.201500213 · Cited by 1,786
More Reliable Lithium‐Sulfur Batteries: Status, Solutions and Prospects
Fang, R., Zhao, S., Sun, Z., Wang, D., Cheng, H., & Li, F. (2017) · Advanced Materials · doi:10.1002/adma.201606823 · Cited by 1,785
Review on High‐Loading and High‐Energy Lithium–Sulfur Batteries
Peng, H., Huang, J., Cheng, X., & Zhang, Q. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201700260 · Cited by 1,746
Nanoscale Nucleation and Growth of Electrodeposited Lithium Metal
Pei, A., Zheng, G., Shi, F., Li, Y., & Cui, Y. (2017) · Nano Letters · doi:10.1021/acs.nanolett.6b04755 · Cited by 1,726
Self-citationPromises and challenges of nanomaterials for lithium-based rechargeable batteries
Sun, Y., Liu, N., & Cui, Y. (2016) · Nature Energy · doi:10.1038/nenergy.2016.71 · Cited by 1,703
Self-citationFluoroethylene Carbonate Additives to Render Uniform Li Deposits in Lithium Metal Batteries
Zhang, X., Cheng, X., Chen, X., Yan, C., & Zhang, Q. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201605989 · Cited by 1,699
Nanostructured Metal Oxides and Sulfides for Lithium–Sulfur Batteries
Liu, X., Huang, J., Zhang, Q., & Mai, L. (2017) · Advanced Materials · doi:10.1002/adma.201601759 · Cited by 1,616
Transition of lithium growth mechanisms in liquid electrolytes
Bai, P., Li, J., Brushett, F. R., & Bazant, M. Z. (2016) · Energy & Environmental Science · doi:10.1039/c6ee01674j · Cited by 1,591
Yang, C.-P., Yin, Y.-X., Zhang, S.-F., Li, N.-W., & Guo, Y.-G. (2015) · Nature Communications · doi:10.1038/ncomms9058 · Cited by 1,589
Non-flammable electrolyte enables Li-metal batteries with aggressive cathode chemistries
Fan, X., Chen, L., Borodin, O., Ji, X., Chen, J., Hou, S., Deng, T., Zheng, J., Yang, C., Liou, S.-C., et al. (2018) · Nature Nanotechnology · doi:10.1038/s41565-018-0183-2 · Cited by 1,371
Zhang, R., Chen, X., Chen, X., Cheng, X., Zhang, X., Yan, C., & Zhang, Q. (2017) · Angewandte Chemie International Edition · doi:10.1002/anie.201702099 · Cited by 1,225
Reviving Lithium‐Metal Anodes for Next‐Generation High‐Energy Batteries
Guo, Y., Li, H., & Zhai, T. (2017) · Advanced Materials · doi:10.1002/adma.201700007 · Cited by 1,215
A facile surface chemistry route to a stabilized lithium metal anode
Liang, X., Pang, Q., Kochetkov, I. R., Sempere, M. S., Huang, H., Sun, X., & Nazar, L. F. (2017) · Nature Energy · doi:10.1038/nenergy.2017.119 · Cited by 1,083
Cheng, X., Hou, T., Zhang, R., Peng, H., Zhao, C., Huang, J., & Zhang, Q. (2016) · Advanced Materials · doi:10.1002/adma.201506124 · Cited by 994
Formulating energy density for designing practical lithium–sulfur batteries
Zhou, G., Chen, H., & Cui, Y. (2022) · Nature Energy · doi:10.1038/s41560-022-01001-0 · Cited by 983
Self-citationHighly Fluorinated Interphases Enable High-Voltage Li-Metal Batteries
Fan, X., Chen, L., Ji, X., Deng, T., Hou, S., Chen, J., Zheng, J., Wang, F., Jiang, J., Xu, K., et al. (2018) · Chem · doi:10.1016/j.chempr.2017.10.017 · Cited by 961
Practical Challenges and Future Perspectives of All-Solid-State Lithium-Metal Batteries
Xia, S., Wu, X., Zhang, Z., Cui, Y., & Liu, W. (2019) · Chem · doi:10.1016/j.chempr.2018.11.013 · Cited by 942
Self-citationLithium-coated polymeric matrix as a minimum volume-change and dendrite-free lithium metal anode
Liu, Y., Lin, D., Liang, Z., Zhao, J., Yan, K., & Cui, Y. (2016) · Nature Communications · doi:10.1038/ncomms10992 · Cited by 902
Self-citationWood, K. N., Kazyak, E., Chadwick, A. F., Chen, K.-H., Zhang, J.-G., Thornton, K., & Dasgupta, N. P. (2016) · ACS Central Science · doi:10.1021/acscentsci.6b00260 · Cited by 900
Chemical Dealloying Derived 3D Porous Current Collector for Li Metal Anodes
Yun, Q., He, Y., Lv, W., Zhao, Y., Li, B., Kang, F., & Yang, Q. (2016) · Advanced Materials · doi:10.1002/adma.201601409 · Cited by 870
3D Porous Cu Current Collector/Li‐Metal Composite Anode for Stable Lithium‐Metal Batteries
Li, Q., Zhu, S., & Lu, Y. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201606422 · Cited by 854
Zhang, H., Eshetu, G. G., Judez, X., Li, C., Rodriguez‐Martínez, L. M., & Armand, M. (2018) · Angewandte Chemie International Edition · doi:10.1002/anie.201712702 · Cited by 774
Protected Lithium‐Metal Anodes in Batteries: From Liquid to Solid
Yang, C., Fu, K., Zhang, Y., Hitz, E., & Hu, L. (2017) · Advanced Materials · doi:10.1002/adma.201701169 · Cited by 757
Coralloid Carbon Fiber-Based Composite Lithium Anode for Robust Lithium Metal Batteries
Zhang, R., Chen, X., Shen, X., Zhang, X.-Q., Chen, X.-R., Cheng, X.-B., Yan, C., Zhao, C.-Z., & Zhang, Q. (2018) · Joule · doi:10.1016/j.joule.2018.02.001 · Cited by 728
Towards practical lithium-metal anodes
Zhang, X., Yang, Y., & Zhou, Z. (2020) · Chemical Society Reviews · doi:10.1039/c9cs00838a · Cited by 726
Peng, C., Ning, G.-H., Su, J., Zhong, G., Tang, W., Tian, B., Su, C., Yu, D., Zu, L., Yang, J., et al. (2017) · Nature Energy · doi:10.1038/nenergy.2017.74 · Cited by 713
Review—Practical Challenges Hindering the Development of Solid State Li Ion Batteries
Kerman, K., Luntz, A., Viswanathan, V., Chiang, Y.-M., & Chen, Z. (2017) · Journal of The Electrochemical Society · doi:10.1149/2.1571707jes · Cited by 712
Self-citationRevisiting the Role of Polysulfides in Lithium–Sulfur Batteries
Li, G., Wang, S., Zhang, Y., Li, M., Chen, Z., & Lu, J. (2018) · Advanced Materials · doi:10.1002/adma.201705590 · Cited by 711
High-Performance Anode Materials for Rechargeable Lithium-Ion Batteries
Lu, J., Chen, Z., Pan, F., Cui, Y., & Amine, K. (2018) · Electrochemical Energy Reviews · doi:10.1007/s41918-018-0001-4 · Cited by 695
Self-citationLiu, W., Liu, P., & Mitlin, D. (2020) · Advanced Energy Materials · doi:10.1002/aenm.202002297 · Cited by 687
Zhang, R., Cheng, X., Zhao, C., Peng, H., Shi, J., Huang, J., Wang, J., Wei, F., & Zhang, Q. (2016) · Advanced Materials · doi:10.1002/adma.201504117 · Cited by 686
Wang, C., Gong, Y., Liu, B., Fu, K., Yao, Y., Hitz, E., Li, Y., Dai, J., Xu, S., Luo, W., et al. (2017) · Nano Letters · doi:10.1021/acs.nanolett.6b04695 · Cited by 682
Free-Standing Copper Nanowire Network Current Collector for Improving Lithium Anode Performance
Lu, L.-L., Ge, J., Yang, J.-N., Chen, S.-M., Yao, H.-B., Zhou, F., & Yu, S.-H. (2016) · Nano Letters · doi:10.1021/acs.nanolett.6b01581 · Cited by 678
Self-citationBeyond lithium ion batteries: Higher energy density battery systems based on lithium metal anodes
Shen, X., Liu, H., Cheng, X.-B., Yan, C., & Huang, J.-Q. (2018) · Energy Storage Materials · doi:10.1016/j.ensm.2017.12.002 · Cited by 653
Towards better Li metal anodes: Challenges and strategies
Zhang, Y., Zuo, T.-T., Popovic, J., Lim, K., Yin, Y.-X., Maier, J., & Guo, Y.-G. (2020) · Materials Today · doi:10.1016/j.mattod.2019.09.018 · Cited by 653
Emerging Era of Electrolyte Solvation Structure and Interfacial Model in Batteries
Cheng, H., Sun, Q., Li, L., Zou, Y., Wang, Y., Cai, T., Zhao, F., Liu, G., Ma, Z., Wahyudi, W., et al. (2022) · ACS Energy Letters · doi:10.1021/acsenergylett.1c02425 · Cited by 640
Yan, C., Yao, Y., Chen, X., Cheng, X., Zhang, X., Huang, J., & Zhang, Q. (2018) · Angewandte Chemie International Edition · doi:10.1002/anie.201807034 · Cited by 635
Stabilizing metal battery anodes through the design of solid electrolyte interphases
Zhao, Q., Stalin, S., & Archer, L. A. (2021) · Joule · doi:10.1016/j.joule.2021.03.024 · Cited by 629
Ionic liquids and derived materials for lithium and sodium batteries
Yang, Q., Zhang, Z., Sun, X.-G., Hu, Y.-S., Xing, H., & Dai, S. (2018) · Chemical Society Reviews · doi:10.1039/c7cs00464h · Cited by 601
Liquid electrolyte: The nexus of practical lithium metal batteries
Wang, H., Yu, Z., Kong, X., Kim, S. C., Boyle, D. T., Qin, J., Bao, Z., & Cui, Y. (2022) · Joule · doi:10.1016/j.joule.2021.12.018 · Cited by 596
Self-citationRecent Progress in Understanding Solid Electrolyte Interphase on Lithium Metal Anodes
Wu, H., Jia, H., Wang, C., Zhang, J., & Xu, W. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202003092 · Cited by 595
A stable room-temperature sodium–sulfur battery
Wei, S., Xu, S., Agrawral, A., Choudhury, S., Lu, Y., Tu, Z., Ma, L., & Archer, L. A. (2016) · Nature Communications · doi:10.1038/ncomms11722 · Cited by 589
A Cooperative Interface for Highly Efficient Lithium–Sulfur Batteries
Peng, H., Zhang, Z., Huang, J., Zhang, G., Xie, J., Xu, W., Shi, J., Chen, X., Cheng, X., & Zhang, Q. (2016) · Advanced Materials · doi:10.1002/adma.201603401 · Cited by 583
Graphitized Carbon Fibers as Multifunctional 3D Current Collectors for High Areal Capacity Li Anodes
Zuo, T., Wu, X., Yang, C., Yin, Y., Ye, H., Li, N., & Guo, Y. (2017) · Advanced Materials · doi:10.1002/adma.201700389 · Cited by 579
Liu, Y., Lin, D., Li, Y., Chen, G., Pei, A., Nix, O., Li, Y., & Cui, Y. (2018) · Nature Communications · doi:10.1038/s41467-018-06077-5 · Cited by 570
Self-citationWood, K. N., Noked, M., & Dasgupta, N. P. (2017) · ACS Energy Letters · doi:10.1021/acsenergylett.6b00650 · Cited by 558
Advanced Micro/Nanostructures for Lithium Metal Anodes
Zhang, R., Li, N., Cheng, X., Yin, Y., Zhang, Q., & Guo, Y. (2017) · Advanced Science · doi:10.1002/advs.201600445 · Cited by 549
Towards High‐Safe Lithium Metal Anodes: Suppressing Lithium Dendrites via Tuning Surface Energy
Wang, D., Zhang, W., Zheng, W., Cui, X., Rojo, T., & Zhang, Q. (2017) · Advanced Science · doi:10.1002/advs.201600168 · Cited by 548
Moving beyond 99.9% Coulombic efficiency for lithium anodes in liquid electrolytes
Hobold, G. M., Lopez, J., Guo, R., Minafra, N., Banerjee, A., Shirley Meng, Y., Shao-Horn, Y., & Gallant, B. M. (2021) · Nature Energy · doi:10.1038/s41560-021-00910-w · Cited by 547
Liu, L., Yin, Y., Li, J., Wang, S., Guo, Y., & Wan, L. (2018) · Advanced Materials · doi:10.1002/adma.201706216 · Cited by 538
Anode‐Free Full Cells: A Pathway to High‐Energy Density Lithium‐Metal Batteries
Nanda, S., Gupta, A., & Manthiram, A. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202000804 · Cited by 537
Developing High‐Performance Lithium Metal Anode in Liquid Electrolytes: Challenges and Progress
Li, S., Jiang, M., Xie, Y., Xu, H., Jia, J., & Li, J. (2018) · Advanced Materials · doi:10.1002/adma.201706375 · Cited by 535
Implantable Solid Electrolyte Interphase in Lithium-Metal Batteries
Cheng, X.-B., Yan, C., Chen, X., Guan, C., Huang, J.-Q., Peng, H.-J., Zhang, R., Yang, S.-T., & Zhang, Q. (2017) · Chem · doi:10.1016/j.chempr.2017.01.003 · Cited by 524
Applications of Phosphorene and Black Phosphorus in Energy Conversion and Storage Devices
Pang, J., Bachmatiuk, A., Yin, Y., Trzebicka, B., Zhao, L., Fu, L., Mendes, R. G., Gemming, T., Liu, Z., & Rummeli, M. H. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201702093 · Cited by 518
Challenges and advances in wide-temperature rechargeable lithium batteries
Feng, Y., Zhou, L., Ma, H., Wu, Z., Zhao, Q., Li, H., Zhang, K., & Chen, J. (2022) · Energy & Environmental Science · doi:10.1039/d1ee03292e · Cited by 517
Surface Fluorination of Reactive Battery Anode Materials for Enhanced Stability
Zhao, J., Liao, L., Shi, F., Lei, T., Chen, G., Pei, A., Sun, J., Yan, K., Zhou, G., Xie, J., et al. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.7b05251 · Cited by 514
Self-citationDual‐Layered Film Protected Lithium Metal Anode to Enable Dendrite‐Free Lithium Deposition
Yan, C., Cheng, X., Tian, Y., Chen, X., Zhang, X., Li, W., Huang, J., & Zhang, Q. (2018) · Advanced Materials · doi:10.1002/adma.201707629 · Cited by 513
Self-citationHigh-Concentration Ether Electrolytes for Stable High-Voltage Lithium Metal Batteries
Ren, X., Zou, L., Jiao, S., Mei, D., Engelhard, M. H., Li, Q., Lee, H., Niu, C., Adams, B. D., Wang, C., et al. (2019) · ACS Energy Letters · doi:10.1021/acsenergylett.9b00381 · Cited by 502
Wang, X., Zeng, W., Hong, L., Xu, W., Yang, H., Wang, F., Duan, H., Tang, M., & Jiang, H. (2018) · Nature Energy · doi:10.1038/s41560-018-0104-5 · Cited by 499
In situ analytical techniques for battery interface analysis
Tripathi, A. M., Su, W.-N., & Hwang, B. J. (2018) · Chemical Society Reviews · doi:10.1039/c7cs00180k · Cited by 488
Regulating Anions in the Solvation Sheath of Lithium Ions for Stable Lithium Metal Batteries
Zhang, X.-Q., Chen, X., Hou, L.-P., Li, B.-Q., Cheng, X.-B., Huang, J.-Q., & Zhang, Q. (2019) · ACS Energy Letters · doi:10.1021/acsenergylett.8b02376 · Cited by 485
Stable Li Metal Anodes via Regulating Lithium Plating/Stripping in Vertically Aligned Microchannels
Wang, S., Yin, Y., Zuo, T., Dong, W., Li, J., Shi, J., Zhang, C., Li, N., Li, C., & Guo, Y. (2017) · Advanced Materials · doi:10.1002/adma.201703729 · Cited by 484
Challenges and perspectives of garnet solid electrolytes for all solid-state lithium batteries
Liu, Q., Geng, Z., Han, C., Fu, Y., Li, S., He, Y.-B., Kang, F., & Li, B. (2018) · Journal of Power Sources · doi:10.1016/j.jpowsour.2018.04.019 · Cited by 478
High-capacity, low-tortuosity, and channel-guided lithium metal anode
Zhang, Y., Luo, W., Wang, C., Li, Y., Chen, C., Song, J., Dai, J., Hitz, E. M., Xu, S., Yang, C., et al. (2017) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1618871114 · Cited by 472
Uniform High Ionic Conducting Lithium Sulfide Protection Layer for Stable Lithium Metal Anode
Chen, H., Pei, A., Lin, D., Xie, J., Yang, A., Xu, J., Lin, K., Wang, J., Wang, H., Shi, F., et al. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201900858 · Cited by 472
Self-citationAir-stable and freestanding lithium alloy/graphene foil as an alternative to lithium metal anodes
Zhao, J., Zhou, G., Yan, K., Xie, J., Li, Y., Liao, L., Jin, Y., Liu, K., Hsu, P.-C., Wang, J., et al. (2017) · Nature Nanotechnology · doi:10.1038/nnano.2017.129 · Cited by 468
Self-citationZheng, J., Kim, M. S., Tu, Z., Choudhury, S., Tang, T., & Archer, L. A. (2020) · Chemical Society Reviews · doi:10.1039/c9cs00883g · Cited by 466
Lin, D., Liu, Y., Chen, W., Zhou, G., Liu, K., Dunn, B., & Cui, Y. (2017) · Nano Letters · doi:10.1021/acs.nanolett.7b01020 · Cited by 465
Self-citationMaking Li-metal electrodes rechargeable by controlling the dendrite growth direction
Liu, Y., Liu, Q., Xin, L., Liu, Y., Yang, F., Stach, E. A., & Xie, J. (2017) · Nature Energy · doi:10.1038/nenergy.2017.83 · Cited by 464
Huang, Y., Lin, L., Zhang, C., Liu, L., Li, Y., Qiao, Z., Lin, J., Wei, Q., Wang, L., Xie, Q., et al. (2022) · Advanced Science · doi:10.1002/advs.202106004 · Cited by 463
Li, Y., Huang, W., Li, Y., Pei, A., Boyle, D. T., & Cui, Y. (2018) · Joule · doi:10.1016/j.joule.2018.08.004 · Cited by 459
Self-citationStabilizing Lithium Metal Anodes by Uniform Li-Ion Flux Distribution in Nanochannel Confinement
Liu, W., Lin, D., Pei, A., & Cui, Y. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.6b08730 · Cited by 455
Self-citationLithiophilic-lithiophobic gradient interfacial layer for a highly stable lithium metal anode
Zhang, H., Liao, X., Guan, Y., Xiang, Y., Li, M., Zhang, W., Zhu, X., Ming, H., Lu, L., Qiu, J., et al. (2018) · Nature Communications · doi:10.1038/s41467-018-06126-z · Cited by 453
Effects of Polymer Coatings on Electrodeposited Lithium Metal
Lopez, J., Pei, A., Oh, J. Y., Wang, G.-J. N., Cui, Y., & Bao, Z. (2018) · Journal of the American Chemical Society · doi:10.1021/jacs.8b06047 · Cited by 452
Self-citationYe, H., Xin, S., Yin, Y.-X., Li, J.-Y., Guo, Y.-G., & Wan, L.-J. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.7b01763 · Cited by 451
A highly reversible room-temperature lithium metal battery based on crosslinked hairy nanoparticles
Choudhury, S., Mangal, R., Agrawal, A., & Archer, L. A. (2015) · Nature Communications · doi:10.1038/ncomms10101 · Cited by 450
Recent advances in shuttle effect inhibition for lithium sulfur batteries
Ren, W., Ma, W., Zhang, S., & Tang, B. (2019) · Energy Storage Materials · doi:10.1016/j.ensm.2019.02.022 · Cited by 434
Zhao, H., Lei, D., He, Y., Yuan, Y., Yun, Q., Ni, B., Lv, W., Li, B., Yang, Q., Kang, F., et al. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201800266 · Cited by 431
An Armored Mixed Conductor Interphase on a Dendrite‐Free Lithium‐Metal Anode
Yan, C., Cheng, X., Yao, Y., Shen, X., Li, B., Li, W., Zhang, R., Huang, J., Li, H., & Zhang, Q. (2018) · Advanced Materials · doi:10.1002/adma.201804461 · Cited by 427
Self-citationStructural Design of Lithium–Sulfur Batteries: From Fundamental Research to Practical Application
Yang, X., Li, X., Adair, K., Zhang, H., & Sun, X. (2018) · Electrochemical Energy Reviews · doi:10.1007/s41918-018-0010-3 · Cited by 411
Designing solid-liquid interphases for sodium batteries
Choudhury, S., Wei, S., Ozhabes, Y., Gunceler, D., Zachman, M. J., Tu, Z., Shin, J. H., Nath, P., Agrawal, A., Kourkoutis, L. F., et al. (2017) · Nature Communications · doi:10.1038/s41467-017-00742-x · Cited by 410
Strategies toward High‐Loading Lithium–Sulfur Battery
Hu, Y., Chen, W., Lei, T., Jiao, Y., Huang, J., Hu, A., Gong, C., Yan, C., Wang, X., & Xiong, J. (2020) · Advanced Energy Materials · doi:10.1002/aenm.202000082 · Cited by 402
Nanodiamonds suppress the growth of lithium dendrites
Cheng, X.-B., Zhao, M.-Q., Chen, C., Pentecost, A., Maleski, K., Mathis, T., Zhang, X.-Q., Zhang, Q., Jiang, J., & Gogotsi, Y. (2017) · Nature Communications · doi:10.1038/s41467-017-00519-2 · Cited by 401
Cheng, X.-B., Yan, C., Huang, J.-Q., Li, P., Zhu, L., Zhao, L., Zhang, Y., Zhu, W., Yang, S.-T., & Zhang, Q. (2017) · Energy Storage Materials · doi:10.1016/j.ensm.2016.09.003 · Cited by 394
A review of recent developments in rechargeable lithium–sulfur batteries
Kang, W., Deng, N., Ju, J., Li, Q., Wu, D., Ma, X., Li, L., Naebe, M., & Cheng, B. (2016) · Nanoscale · doi:10.1039/c6nr04923k · Cited by 391
Free-Standing Hollow Carbon Fibers as High-Capacity Containers for Stable Lithium Metal Anodes
Liu, L., Yin, Y.-X., Li, J.-Y., Li, N.-W., Zeng, X.-X., Ye, H., Guo, Y.-G., & Wan, L.-J. (2017) · Joule · doi:10.1016/j.joule.2017.06.004 · Cited by 391
Conductivity and lithiophilicity gradients guide lithium deposition to mitigate short circuits
Pu, J., Li, J., Zhang, K., Zhang, T., Li, C., Ma, H., Zhu, J., Braun, P. V., Lu, J., & Zhang, H. (2019) · Nature Communications · doi:10.1038/s41467-019-09932-1 · Cited by 387
Key Aspects of Lithium Metal Anodes for Lithium Metal Batteries
Ghazi, Z. A., Sun, Z., Sun, C., Qi, F., An, B., Li, F., & Cheng, H. (2019) · Small · doi:10.1002/smll.201900687 · Cited by 382
Interface Engineering for Lithium Metal Anodes in Liquid Electrolyte
Zhai, P., Liu, L., Gu, X., Wang, T., & Gong, Y. (2020) · Advanced Energy Materials · doi:10.1002/aenm.202001257 · Cited by 380
Costa, C. M., Lee, Y.-H., Kim, J.-H., Lee, S.-Y., & Lanceros-Méndez, S. (2019) · Energy Storage Materials · doi:10.1016/j.ensm.2019.07.024 · Cited by 369
Critical effects of electrolyte recipes for Li and Na metal batteries
Zheng, X., Huang, L., Ye, X., Zhang, J., Min, F., Luo, W., & Huang, Y. (2021) · Chem · doi:10.1016/j.chempr.2021.02.025 · Cited by 367
High-Energy All-Solid-State Lithium Batteries with Ultralong Cycle Life
Yao, X., Liu, D., Wang, C., Long, P., Peng, G., Hu, Y.-S., Li, H., Chen, L., & Xu, X. (2016) · Nano Letters · doi:10.1021/acs.nanolett.6b03448 · Cited by 360
Lithium Nitrate Regulated Sulfone Electrolytes for Lithium Metal Batteries
Fu, J., Ji, X., Chen, J., Chen, L., Fan, X., Mu, D., & Wang, C. (2020) · Angewandte Chemie International Edition · doi:10.1002/anie.202009575 · Cited by 358
Designing Safe Electrolyte Systems for a High‐Stability Lithium–Sulfur Battery
Chen, W., Lei, T., Wu, C., Deng, M., Gong, C., Hu, K., Ma, Y., Dai, L., Lv, W., He, W., et al. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201702348 · Cited by 356
Metadata
- Authors
- Li, W., Yao, H., Yan, K., Zheng, G., Liang, Z., Chiang, Y.-M., & Cui, Y.
- Venue
- Nature Communications
- Published
- 2015-06-17
- Volume
- 6
- Issue
- 1
- Pages
- 7436-7436
- ISSN
- 2041-1723 (ISSN-L)
- OpenAlex
- W2265160803
- Cited by
- 1,540
- References
- 38
- FWCI
- 65.92
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.