The DOI matches its Crossref record; 84 of the 84 references it cites were found in a registry or an index.
The Boom in 3D-Printed Sensor Technology
Open accessAbstract
Future sensing applications will include high-performance features, such as toxin detection, real-time monitoring of physiological events, advanced diagnostics, and connected feedback. However, such multi-functional sensors require advancements in sensitivity, specificity, and throughput with the simultaneous delivery of multiple detection in a short time. Recent advances in 3D printing and electronics have brought us closer to sensors with multiplex advantages, and additive manufacturing approaches offer a new scope for sensor fabrication. To this end, we review the recent advances in 3D-printed cutting-edge sensors. These achievements demonstrate the successful application of 3D-printing technology in sensor fabrication, and the selected studies deeply explore the potential for creating sensors with higher performance. Further development of multi-process 3D printing is expected to expand future sensor utility and availability.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Fully integrated wearable sensor arrays for multiplexed in situ perspiration analysis
Gao, W., Emaminejad, S., Nyein, H. Y. Y., Challa, S., Chen, K., Peck, A., Fahad, H. M., Ota, H., Shiraki, H., Kiriya, D., et al. (2016) · Nature · doi:10.1038/nature16521 · Cited by 5,087
Kim, D.-H., Lu, N., Ma, R., Kim, Y.-S., Kim, R.-H., Wang, S., Wu, J., Won, S. M., Tao, H., Islam, A., et al. (2011) · Science · doi:10.1126/science.1206157 · Cited by 4,836
Bioinspired structural materials
Wegst, U. G. K., Bai, H., Saiz, E., Tomsia, A. P., & Ritchie, R. O. (2015) · Nature Materials · doi:10.1038/nmat4089 · Cited by 4,721
High-Resolution Inkjet Printing of All-Polymer Transistor Circuits
Sirringhaus, H., Kawase, T., Friend, R. H., Shimoda, T., Inbasekaran, M., Wu, W., & Woo, E. P. (2000) · Science · doi:10.1126/science.290.5499.2123 · Cited by 3,311
Bhatia, S. N., & Ingber, D. E. (2014) · Nature Biotechnology · doi:10.1038/nbt.2989 · Cited by 3,305
A stretchable carbon nanotube strain sensor for human-motion detection
Yamada, T., Hayamizu, Y., Yamamoto, Y., Yomogida, Y., Izadi-Najafabadi, A., Futaba, D. N., & Hata, K. (2011) · Nature Nanotechnology · doi:10.1038/nnano.2011.36 · Cited by 3,247
Skin-like pressure and strain sensors based on transparent elastic films of carbon nanotubes
Lipomi, D. J., Vosgueritchian, M., Tee, B. C.-K., Hellstrom, S. L., Lee, J. A., Fox, C. H., & Bao, Z. (2011) · Nature Nanotechnology · doi:10.1038/nnano.2011.184 · Cited by 3,188
Physical limitations of omnidirectional antennas
(1948) · DSpace@MIT (Massachusetts Institute of Technology) · Cited by 2,235
Shepherd, R. F., Ilievski, F., Choi, W., Morin, S. A., Stokes, A. A., Mazzeo, A. D., Chen, X., Wang, M., & Whitesides, G. M. (2011) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1116564108 · Cited by 2,111
Stretchable active-matrix organic light-emitting diode display using printable elastic conductors
Sekitani, T., Nakajima, H., Maeda, H., Fukushima, T., Aida, T., Hata, K., & Someya, T. (2009) · Nature Materials · doi:10.1038/nmat2459 · Cited by 1,767
Stretchable, Transparent, Ionic Conductors
Keplinger, C., Sun, J.-Y., Foo, C. C., Rothemund, P., Whitesides, G. M., & Suo, Z. (2013) · Science · doi:10.1126/science.1240228 · Cited by 1,754
Evaluation of 3D Printing and Its Potential Impact on Biotechnology and the Chemical Sciences
Gross, B. C., Erkal, J. L., Lockwood, S. Y., Chen, C., & Spence, D. M. (2014) · Analytical Chemistry · doi:10.1021/ac403397r · Cited by 1,746
A flexible and highly sensitive strain-gauge sensor using reversible interlocking of nanofibres
Pang, C., Lee, G.-Y., Kim, T.-I., Kim, S. M., Kim, H. N., Ahn, S.-H., & Suh, K.-Y. (2012) · Nature Materials · doi:10.1038/nmat3380 · Cited by 1,695
A Stretchable Form of Single-Crystal Silicon for High-Performance Electronics on Rubber Substrates
Khang, D.-Y., Jiang, H., Huang, Y., & Rogers, J. A. (2006) · Science · doi:10.1126/science.1121401 · Cited by 1,689
Stretchable and Foldable Silicon Integrated Circuits
Kim, D.-H., Ahn, J.-H., Choi, W. M., Kim, H.-S., Kim, T.-H., Song, J., Huang, Y. Y., Liu, Z., Lu, C., & Rogers, J. A. (2008) · Science · doi:10.1126/science.1154367 · Cited by 1,676
An overview of nitinol medical applications
Duerig, T., Pelton, A., & Stöckel, D. (1999) · Materials Science and Engineering: A · doi:10.1016/s0921-5093(99)00294-4 · Cited by 1,628
Embedded 3D Printing of Strain Sensors within Highly Stretchable Elastomers
Muth, J. T., Vogt, D. M., Truby, R. L., Mengüç, Y., Kolesky, D. B., Wood, R. J., & Lewis, J. A. (2014) · Advanced Materials · doi:10.1002/adma.201400334 · Cited by 1,611
Electrochemical biosensors: Towards point-of-care cancer diagnostics
Wang, J. (2006) · Biosensors and Bioelectronics · doi:10.1016/j.bios.2005.10.027 · Cited by 1,454
All-Polymer Field-Effect Transistor Realized by Printing Techniques
Garnier, F., Hajlaoui, R., Yassar, A., & Srivastava, P. (1994) · Science · doi:10.1126/science.265.5179.1684 · Cited by 1,432
Someya, T., Kato, Y., Sekitani, T., Iba, S., Noguchi, Y., Murase, Y., Kawaguchi, H., & Sakurai, T. (2005) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.0502392102 · Cited by 1,389
A Rubberlike Stretchable Active Matrix Using Elastic Conductors
Sekitani, T., Noguchi, Y., Hata, K., Fukushima, T., Aida, T., & Someya, T. (2008) · Science · doi:10.1126/science.1160309 · Cited by 1,366
A hemispherical electronic eye camera based on compressible silicon optoelectronics
Ko, H. C., Stoykovich, M. P., Song, J., Malyarchuk, V., Choi, W. M., Yu, C.-J., Geddes III, J. B., Xiao, J., Wang, S., Huang, Y., et al. (2008) · Nature · doi:10.1038/nature07113 · Cited by 1,352
Soft Microfluidic Assemblies of Sensors, Circuits, and Radios for the Skin
Xu, S., Zhang, Y., Jia, L., Mathewson, K. E., Jang, K.-I., Kim, J., Fu, H., Huang, X., Chava, P., Wang, R., et al. (2014) · Science · doi:10.1126/science.1250169 · Cited by 1,199
Highly Stretchable Piezoresistive Graphene–Nanocellulose Nanopaper for Strain Sensors
Yan, C., Wang, J., Kang, W., Cui, M., Wang, X., Foo, C. Y., Chee, K. J., & Lee, P. S. (2014) · Advanced Materials · doi:10.1002/adma.201304742 · Cited by 1,179
Highly compressible 3D periodic graphene aerogel microlattices
Zhu, C., Han, T. Y.-J., Duoss, E. B., Golobic, A. M., Kuntz, J. D., Spadaccini, C. M., & Worsley, M. A. (2015) · Nature Communications · doi:10.1038/ncomms7962 · Cited by 1,148
A re-examination of the fundamental limits on the radiation Q of electrically small antennas
McLean, J. S. (1996) · IEEE Transactions on Antennas and Propagation · doi:10.1109/8.496253 · Cited by 1,084
Multiprocess 3D printing for increasing component functionality
MacDonald, E., & Wicker, R. (2016) · Science · doi:10.1126/science.aaf2093 · Cited by 961
Controlled buckling of semiconductor nanoribbons for stretchable electronics
Sun, Y., Choi, W. M., Jiang, H., Huang, Y. Y., & Rogers, J. A. (2006) · Nature Nanotechnology · doi:10.1038/nnano.2006.131 · Cited by 933
Mannoor, M. S., Jiang, Z., James, T., Kong, Y. L., Malatesta, K. A., Soboyejo, W. O., Verma, N., Gracias, D. H., & McAlpine, M. C. (2013) · Nano Letters · doi:10.1021/nl4007744 · Cited by 874
Instrumented cardiac microphysiological devices via multimaterial three-dimensional printing
Lind, J. U., Busbee, T. A., Valentine, A. D., Pasqualini, F. S., Yuan, H., Yadid, M., Park, S.-J., Kotikian, A., Nesmith, A. P., Campbell, P. H., et al. (2017) · Nature Materials · doi:10.1038/nmat4782 · Cited by 863
Highly Sensitive Skin‐Mountable Strain Gauges Based Entirely on Elastomers
Lu, N., Lu, C., Yang, S., & Rogers, J. (2012) · Advanced Functional Materials · doi:10.1002/adfm.201200498 · Cited by 825
Omnidirectional Printing of 3D Microvascular Networks
Wu, W., DeConinck, A., & Lewis, J. A. (2011) · Advanced Materials · doi:10.1002/adma.201004625 · Cited by 819
Design and Fabrication of Soft Artificial Skin Using Embedded Microchannels and Liquid Conductors
Park, Y.-L., Chen, B.-R., & Wood, R. J. (2012) · IEEE Sensors Journal · doi:10.1109/jsen.2012.2200790 · Cited by 776
Recent Progress in Materials and Devices toward Printable and Flexible Sensors
Rim, Y. S., Bae, S., Chen, H., De Marco, N., & Yang, Y. (2016) · Advanced Materials · doi:10.1002/adma.201505118 · Cited by 771
Ko, S. H., Pan, H., Grigoropoulos, C. P., Luscombe, C. K., Fréchet, J. M. J., & Poulikakos, D. (2007) · Nanotechnology · doi:10.1088/0957-4484/18/34/345202 · Cited by 770
Flexible and Stretchable Electronics for Biointegrated Devices
Kim, D.-H., Ghaffari, R., Lu, N., & Rogers, J. A. (2012) · Annual Review of Biomedical Engineering · doi:10.1146/annurev-bioeng-071811-150018 · Cited by 749 · cited 1×
“Stretchable electronics is a new class of electronic devices that has the potential to offer exciting opportunities, particularly in the area of large-area electronics, and has been applied in soft robotics [84–87], wearable electronics [88–91], human-machine interfaces [92,93], and other areas [94–102].”
BackgroundRobotic Tentacles with Three‐Dimensional Mobility Based on Flexible Elastomers
Martinez, R. V., Branch, J. L., Fish, C. R., Jin, L., Shepherd, R. F., Nunes, R. M. D., Suo, Z., & Whitesides, G. M. (2013) · Advanced Materials · doi:10.1002/adma.201203002 · Cited by 718
A tissue-engineered jellyfish with biomimetic propulsion
Nawroth, J. C., Lee, H., Feinberg, A. W., Ripplinger, C. M., McCain, M. L., Grosberg, A., Dabiri, J. O., & Parker, K. K. (2012) · Nature Biotechnology · doi:10.1038/nbt.2269 · Cited by 647
Xu, L., Gutbrod, S. R., Bonifas, A. P., Su, Y., Sulkin, M. S., Lu, N., Chung, H.-J., Jang, K.-I., Liu, Z., Ying, M., et al. (2014) · Nature Communications · doi:10.1038/ncomms4329 · Cited by 634
Conformal Printing of Electrically Small Antennas on Three‐Dimensional Surfaces
Adams, J. J., Duoss, E. B., Malkowski, T. F., Motala, M. J., Ahn, B. Y., Nuzzo, R. G., Bernhard, J. T., & Lewis, J. A. (2011) · Advanced Materials · doi:10.1002/adma.201003734 · Cited by 630
3D Printing for the Rapid Prototyping of Structural Electronics
Macdonald, E., Salas, R., Espalin, D., Perez, M., Aguilera, E., Muse, D., & Wicker, R. B. (2014) · IEEE Access · doi:10.1109/access.2014.2311810 · Cited by 606
Impedance, bandwidth, and Q of antennas
(2005) · IEEE Antennas and Propagation Magazine · doi:10.1109/map.2005.1436241 · Cited by 598
High‐Strain Sensors Based on ZnO Nanowire/Polystyrene Hybridized Flexible Films
Xiao, X., Yuan, L., Zhong, J., Ding, T., Liu, Y., Cai, Z., Rong, Y., Han, H., Zhou, J., & Wang, Z. L. (2011) · Advanced Materials · doi:10.1002/adma.201103406 · Cited by 552
High-Performance Plastic Transistors Fabricated by Printing Techniques
Bao, Z., Feng, Y., Dodabalapur, A., Raju, V. R., & Lovinger, A. J. (1997) · Chemistry of Materials · doi:10.1021/cm9701163 · Cited by 537
Capacitive Soft Strain Sensors via Multicore–Shell Fiber Printing
Frutiger, A., Muth, J. T., Vogt, D. M., Mengüç, Y., Campo, A., Valentine, A. D., Walsh, C. J., & Lewis, J. A. (2015) · Advanced Materials · doi:10.1002/adma.201500072 · Cited by 468
Sensor for Measuring Strain in Textile
Mattmann, C., Clemens, F., & Tröster, G. (2008) · Sensors · doi:10.3390/s8063719 · Cited by 464
Characterizing and Patterning of PDMS‐Based Conducting Composites
Niu, X. Z., Peng, S. L., Liu, L. Y., Wen, W. J., & Sheng, P. (2007) · Advanced Materials · doi:10.1002/adma.200602515 · Cited by 414
Kim, D., Kim, Y., Wu, J., Liu, Z., Song, J., Kim, H., Huang, Y. Y., Hwang, K., & Rogers, J. A. (2009) · Advanced Materials · doi:10.1002/adma.200900405 · Cited by 403
Review of graphene-based strain sensors
Zhao, J., Zhang, G.-Y., & Shi, D.-X. (2013) · Chinese Physics B · doi:10.1088/1674-1056/22/5/057701 · Cited by 387
Ueberschlag, P. (2001) · Sensor Review · doi:10.1108/02602280110388315 · Cited by 377
Cochrane, C., Koncar, V., Lewandowski, M., & Dufour, C. (2007) · Sensors · doi:10.3390/s7040473 · Cited by 376
3D printing: the dawn of a new era in manufacturing?
Bogue, R. (2013) · Assembly Automation · doi:10.1108/aa-06-2013-055 · Cited by 371
Developments of 3D Printing Microfluidics and Applications in Chemistry and Biology: a Review
He, Y., Wu, Y., Fu, J., Gao, Q., & Qiu, J. (2016) · Electroanalysis · doi:10.1002/elan.201600043 · Cited by 313
Printed optics: 3D printing of embedded optical elements for interactive devices
Willis, K., Brockmeyer, E., Hudson, S., & Poupyrev, I. (2012) · Proceedings of the 25th annual ACM symposium on User interface software and technology · doi:10.1145/2380116.2380190 · Cited by 306
3D-printed microelectronics for integrated circuitry and passive wireless sensors
Wu, S.-Y., Yang, C., Hsu, W., & Lin, L. (2015) · Microsystems & Nanoengineering · doi:10.1038/micronano.2015.13 · Cited by 285
Nanoparticle films as sensitive strain gauges
Herrmann, J., Müller, K.-H., Reda, T., Baxter, G. R., Raguse, B., de Groot, G. J. J. B., Chai, R., Roberts, M., & Wieczorek, L. (2007) · Applied Physics Letters · doi:10.1063/1.2805026 · Cited by 275
A robust compliant grasper via shape deposition manufacturing
Dollar, A. M., & Howe, R. D. (2006) · IEEE/ASME Transactions on Mechatronics · doi:10.1109/tmech.2006.871090 · Cited by 233
Helical 3D‐Printed Metal Electrodes as Custom‐Shaped 3D Platform for Electrochemical Devices
Ambrosi, A., Moo, J. G. S., & Pumera, M. (2016) · Advanced Functional Materials · doi:10.1002/adfm.201503902 · Cited by 214
Lee, C., Jug, L., & Meng, E. (2013) · Applied Physics Letters · doi:10.1063/1.4804580 · Cited by 203
Choi, J.-W., Wicker, R., Lee, S.-H., Choi, K.-H., Ha, C.-S., & Chung, I. (2009) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2009.05.004 · Cited by 200
Metal Ion Implantation for the Fabrication of Stretchable Electrodes on Elastomers
Rosset, S., Niklaus, M., Dubois, P., & Shea, H. R. (2009) · Advanced Functional Materials · doi:10.1002/adfm.200801218 · Cited by 200
3D-printed supercapacitor-powered electrochemiluminescent protein immunoarray
Kadimisetty, K., Mosa, I. M., Malla, S., Satterwhite-Warden, J. E., Kuhns, T. M., Faria, R. C., Lee, N. H., & Rusling, J. F. (2016) · Biosensors and Bioelectronics · doi:10.1016/j.bios.2015.09.017 · Cited by 172
Capacitive-type humidity sensors fabricated using the offset lithographic printing process
Harrey, P. M., Ramsey, B. J., Evans, P. S. A., & Harrison, D. J. (2002) · Sensors and Actuators B Chemical · doi:10.1016/s0925-4005(02)00240-x · Cited by 166
A large area force sensor for smart skin applications
Papakostas, T. V., Lima, J., & Lowe, M. (2003) · Proceedings of IEEE Sensors · doi:10.1109/icsens.2002.1037366 · Cited by 162
All-printed humidity sensor based on graphene/methyl-red composite with high sensitivity
Ali, S., Hassan, A., Hassan, G., Bae, J., & Lee, C. H. (2016) · Carbon · doi:10.1016/j.carbon.2016.04.013 · Cited by 161
Development and validation of a 3D-printed interfacial stress sensor for prosthetic applications
Laszczak, P., Jiang, L., Bader, D. L., et al. (2014) · Medical Engineering & Physics · doi:10.1016/j.medengphy.2014.10.002 · Cited by 135
Inkjet printing on paper for the realization of humidity and temperature sensors
Courbat, J., Kim, Y. B., Briand, D., & de Rooij, N. F. (2011) · International Conference on Solid-State Sensors, Actuators and Microsystems · doi:10.1109/transducers.2011.5969506 · Cited by 125
Design Principles for Rapid Prototyping Forces Sensors Using 3-D Printing
Kesner, S. B., & Howe, R. D. (2011) · IEEE/ASME Transactions on Mechatronics · doi:10.1109/tmech.2011.2160353 · Cited by 123
Hong, Y., Wu, M., Chen, G., Dai, Z., Zhang, Y., Chen, G., & Dong, X. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b10464 · Cited by 123
3D Printing of Cantilever-Type Microstructures by Stereolithography of Ferromagnetic Photopolymers
Credi, C., Fiorese, A., Tironi, M., et al. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b08880 · Cited by 117
Characterization of Printed Moisture Sensors in Packaging Surveillance Applications
Unander, T., & Nilsson, H. (2009) · IEEE Sensors Journal · doi:10.1109/jsen.2009.2024866 · Cited by 111
Krachunov, S., & Casson, A. J. (2016) · Sensors · doi:10.3390/s16101635 · Cited by 109
Layered Manufacturing: Current Status and Future Trends
Dutta, D., Prinz, F. B., Rosen, D. W., & Weiss, L. E. (2000) · Journal of Computing and Information Science in Engineering · doi:10.1115/1.1355029 · Cited by 97
Three-dimensional multi-recognition flexible wearable sensor via graphene aerogel printing
An, B., Ma, Y., Li, W., Su, M., Li, F., & Song, Y. (2016) · Chemical Communications · doi:10.1039/c6cc05910d · Cited by 97
Printed Humidity Sensor With Memory Functionality for Passive RFID Tags
Gao, J., Sidén, J., Nilsson, H., & Gulliksson, M. (2013) · IEEE Sensors Journal · doi:10.1109/jsen.2013.2244034 · Cited by 93
MRI-Compatible Intensity-Modulated Force Sensor for Cardiac Catheterization Procedures
Polygerinos, P., Ataollahi, A., Schaeffter, T., Razavi, R., Seneviratne, L. D., & Althoefer, K. A. (2010) · IEEE Transactions on Biomedical Engineering · doi:10.1109/tbme.2010.2095853 · Cited by 93
Adding Biomolecular Recognition Capability to 3D Printed Objects
Mandon, C. A., Blum, L. J., & Marquette, C. A. (2016) · Analytical Chemistry · doi:10.1021/acs.analchem.6b03426 · Cited by 74
Staymates, M. E., MacCrehan, W. A., Staymates, J. L., Kunz, R. R., Mendum, T. H. E., Ong, T., Geurtsen, G. P., Gillen, G. J., & Craven, B. A. (2016) · Scientific Reports · doi:10.1038/srep36876 · Cited by 72
Suaste-Gómez, E., Rodríguez-Roldán, G., Reyes-Cruz, H., & Terán-Jiménez, O. (2016) · Sensors · doi:10.3390/s16030332 · Cited by 70
Soft, Transparent, Electronic Skin for Distributed and Multiple Pressure Sensing
Levi, A., Piovanelli, M., Furlan, S., Mazzolai, B., & Beccai, L. (2013) · Sensors · doi:10.3390/s130506578 · Cited by 60
Park, C., Yoo, Y.-S., & Hong, S.-T. (2010) · Current Opinion in Otolaryngology & Head & Neck Surgery · doi:10.1097/moo.0b013e32833fecb9 · Cited by 37
Low velocity digital air flow sensor from 3D printed PEDOT:PSS micro-hair structures
Devaraj, H., Aw, K. C., Travaš‐Sejdić, J., & Sharma, R. N. (2015) · International Conference on Solid-State Sensors, Actuators and Microsystems · doi:10.1109/transducers.2015.7181118 · Cited by 13
Zhang, P., Cao, D., & Cui, S. (2013) · Polymer Composites · doi:10.1002/pc.22798 · Cited by 11
Nassar, I. T., Wang, J., Frolik, J. L., & Weller, T. M. (2015) · IEEE Sensors Journal · doi:10.1109/jsen.2015.2432807 · Cited by 8
Cited by
Electrochemical biosensors for pathogen detection
Cesewski, E., & Johnson, B. N. (2020) · Biosensors and Bioelectronics · doi:10.1016/j.bios.2020.112214 · Cited by 902
Printed supercapacitors: materials, printing and applications
Zhang, Y.-Z., Wang, Y., Cheng, T., Yao, L.-Q., Li, X., Lai, W.-Y., & Huang, W. (2019) · Chemical Society Reviews · doi:10.1039/c7cs00819h · Cited by 497
3D Printed Flexible Strain Sensors: From Printing to Devices and Signals
Liu, H., Zhang, H., Han, W., Lin, H., Li, R., Zhu, J., & Huang, W. (2021) · Advanced Materials · doi:10.1002/adma.202004782 · Cited by 441
3D Bioprinting: from Benches to Translational Applications
Heinrich, M. A., Liu, W., Jimenez, A., Yang, J., Akpek, A., Liu, X., Pi, Q., Mu, X., Hu, N., Schiffelers, R. M., et al. (2019) · Small · doi:10.1002/smll.201805510 · Cited by 437
Flexible Multifunctional Sensors for Wearable and Robotic Applications
Xie, M., Hisano, K., Zhu, M., Toyoshi, T., Pan, M., Okada, S., Tsutsumi, O., Kawamura, S., & Bowen, C. (2019) · Advanced Materials Technologies · doi:10.1002/admt.201800626 · Cited by 335
Metadata
- Authors
- Xu, Y., Wu, X., Guo, X., Kong, B., Zhang, M., Qian, X., Mi, S., & Sun, W.
- Venue
- Sensors
- Publisher
- MDPI AG
- Published
- 2017-05-19
- Volume
- 17
- Issue
- 5
- Pages
- 1166
- ISSN
- 1424-8220 (ISSN-L)
- OpenAlex
- W2615857549
- Cited by
- 361
- References
- 84
- FWCI
- 21.05
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.