The DOI matches its Crossref record; 202 of the 202 references it cites were found in a registry or an index.
3D Bioprinting for Cartilage and Osteochondral Tissue Engineering
Open accessAbstract
Significant progress has been made in the field of cartilage and bone tissue engineering over the last two decades. As a result, there is real promise that strategies to regenerate rather than replace damaged or diseased bones and joints will one day reach the clinic however, a number of major challenges must still be addressed before this becomes a reality. These include vascularization in the context of large bone defect repair, engineering complex gradients for bone‐soft tissue interface regeneration and recapitulating the stratified zonal architecture present in many adult tissues such as articular cartilage. Tissue engineered constructs typically lack such spatial complexity in cell types and tissue organization, which may explain their relatively limited success to date. This has led to increased interest in bioprinting technologies in the field of musculoskeletal tissue engineering. The additive, layer by layer nature of such biofabrication strategies makes it possible to generate zonal distributions of cells, matrix and bioactive cues in 3D. The adoption of biofabrication technology in musculoskeletal tissue engineering may therefore make it possible to produce the next generation of biological implants capable of treating a range of conditions. Here, advances in bioprinting for cartilage and osteochondral tissue engineering are reviewed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
3D bioprinting of tissues and organs
Murphy, S. V., & Atala, A. (2014) · Nature Biotechnology · doi:10.1038/nbt.2958 · Cited by 7,034
The return of a forgotten polymer—Polycaprolactone in the 21st century
Woodruff, M. A., & Hutmacher, D. W. (2010) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2010.04.002 · Cited by 4,033
A 3D bioprinting system to produce human-scale tissue constructs with structural integrity
Kang, H.-W., Lee, S. J., Ko, I. K., Kengla, C., Yoo, J. J., & Atala, A. (2016) · Nature Biotechnology · doi:10.1038/nbt.3413 · Cited by 2,622
Biodegradation and biocompatibility of PLA and PLGA microspheres
Anderson, J. M., & Shive, M. S. (1997) · Advanced Drug Delivery Reviews · doi:10.1016/s0169-409x(97)00048-3 · Cited by 2,617
Mechanical properties and the hierarchical structure of bone
Rho, J.-Y., Kuhn-Spearing, L., & Zioupos, P. (1998) · Medical Engineering & Physics · doi:10.1016/s1350-4533(98)00007-1 · Cited by 2,588
Bone Tissue Engineering: Recent Advances and Challenges
Amini, A. R., Laurencin, C. T., & Nukavarapu, S. P. (2012) · Critical Reviews in Biomedical Engineering · doi:10.1615/critrevbiomedeng.v40.i5.10 · Cited by 2,336
Why are double network hydrogels so tough?
Gong, J. P. (2010) · Soft Matter · doi:10.1039/b924290b · Cited by 2,328
Epidemiology of Osteoarthritis
Zhang, Y., & Jordan, J. M. (2010) · Clinics in Geriatric Medicine · doi:10.1016/j.cger.2010.03.001 · Cited by 2,316
Recent advances in bone tissue engineering scaffolds
Bose, S., Roy, M., & Bandyopadhyay, A. (2012) · Trends in Biotechnology · doi:10.1016/j.tibtech.2012.07.005 · Cited by 2,206
3D bioprinting of vascularized, heterogeneous cell-laden tissue constructs
Kolesky, D. B., Truby, R. L., Gladman, A. S., Busbee, T. A., Homan, K. A., & Lewis, J. A. (2014) · Advanced Materials · doi:10.1002/adma.201305506 · Cited by 2,102
Rapid casting of patterned vascular networks for perfusable engineered three-dimensional tissues
Miller, J. S., Stevens, K. R., Yang, M. T., Baker, B. M., Nguyen, D.-H. T., Cohen, D. M., Toro, E., Chen, A. A., Galie, P. A., Yu, X., et al. (2012) · Nature Materials · doi:10.1038/nmat3357 · Cited by 1,917
Printing three-dimensional tissue analogues with decellularized extracellular matrix bioink
Pati, F., Jang, J., Ha, D.-H., Won Kim, S., Rhie, J.-W., Shim, J.-H., Kim, D.-H., & Cho, D.-W. (2014) · Nature Communications · doi:10.1038/ncomms4935 · Cited by 1,904
25th Anniversary Article: Engineering Hydrogels for Biofabrication
Malda, J., Visser, J., Melchels, F. P., Jüngst, T., Hennink, W. E., Dhert, W. J. A., Groll, J., & Hutmacher, D. W. (2013) · Advanced Materials · doi:10.1002/adma.201302042 · Cited by 1,901
Fused deposition modeling of novel scaffold architectures for tissue engineering applications
Zein, I., Hutmacher, D. W., Tan, K. C., & Teoh, S. H. (2002) · Biomaterials · doi:10.1016/s0142-9612(01)00232-0 · Cited by 1,874
Current advances and future perspectives in extrusion-based bioprinting
Ozbolat, I. T., & Hospodiuk, M. (2016) · Biomaterials · doi:10.1016/j.biomaterials.2015.10.076 · Cited by 1,572
Markstedt, K., Mantas, A., Tournier, I., Martínez Ávila, H., Hägg, D., & Gatenholm, P. (2015) · Biomacromolecules · doi:10.1021/acs.biomac.5b00188 · Cited by 1,528
Three-dimensional bioprinting of thick vascularized tissues
Kolesky, D. B., Homan, K. A., Skylar-Scott, M. A., & Lewis, J. A. (2016) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1521342113 · Cited by 1,492
Hutmacher, D. W., Schantz, T., Zein, I., Ng, K. W., Teoh, S. H., & Tan, K. C. (2001) · Journal of Biomedical Materials Research · doi:10.1002/1097-4636(200105)55:2<203::aid-jbm1007>3.0.co;2-7 · Cited by 1,409
Gene-Wide Analysis Detects Two New Susceptibility Genes for Alzheimer's Disease
Escott-Price, V., Bellenguez, C., Wang, L.-S., Choi, S.-H., Harold, D., Jones, L., Holmans, P., Gerrish, A., Vedernikov, A., Richards, A., et al. (2014) · PLoS ONE · doi:10.1371/journal.pone.0094661 · Cited by 1,398
Department of Materials, U. O. O., Sachlos, E., & Czernuszka, J. (2003) · European Cells and Materials · doi:10.22203/ecm.v005a03 · Cited by 1,303
A review of trends and limitations in hydrogel-rapid prototyping for tissue engineering
Billiet, T., Vandenhaute, M., Schelfhout, J., Van Vlierberghe, S., & Dubruel, P. (2012) · Biomaterials · doi:10.1016/j.biomaterials.2012.04.050 · Cited by 1,284
Repair and tissue engineering techniques for articular cartilage
Makris, E. A., Gomoll, A. H., Malizos, K. N., Hu, J. C., & Athanasiou, K. A. (2015) · Nature Reviews Rheumatology · doi:10.1038/nrrheum.2014.157 · Cited by 1,245
Unlike Bone, Cartilage Regeneration Remains Elusive
Huey, D. J., Hu, J. C., & Athanasiou, K. A. (2012) · Science · doi:10.1126/science.1222454 · Cited by 1,182
Direct 3D Printing of Shear‐Thinning Hydrogels into Self‐Healing Hydrogels
Highley, C. B., Rodell, C. B., & Burdick, J. A. (2015) · Advanced Materials · doi:10.1002/adma.201501234 · Cited by 1,043
Billiet, T., Gevaert, E., De Schryver, T., Cornelissen, M., & Dubruel, P. (2014) · Biomaterials · doi:10.1016/j.biomaterials.2013.09.078 · Cited by 1,015
Zysset, P. K., Edward Guo, X., Edward Hoffler, C., Moore, K. E., & Goldstein, S. A. (1999) · Journal of Biomechanics · doi:10.1016/s0021-9290(99)00111-6 · Cited by 1,006
Bharathavikru, S., & Dudnakova, T. (2016) · Cited by 957
Hydrogel bioprinted microchannel networks for vascularization of tissue engineering constructs
Bertassoni, L. E., Cecconi, M., Manoharan, V., Nikkhah, M., Hjortnaes, J., Cristino, A. L., Barabaschi, G., Demarchi, D., Dokmeci, M. R., Yang, Y., et al. (2014) · Lab Chip · doi:10.1039/c4lc00030g · Cited by 944
Articular cartilage: tissue design and chondrocyte-matrix interactions.
Buckwalter, J. A., & Mankin, H. J. (1998) · PubMed · Cited by 932
Direct 3D bioprinting of perfusable vascular constructs using a blend bioink
Jia, W., Gungor-Ozkerim, P. S., Zhang, Y. S., Yue, K., Zhu, K., Liu, W., Pi, Q., Byambaa, B., Dokmeci, M. R., Shin, S. R., et al. (2016) · Biomaterials · doi:10.1016/j.biomaterials.2016.07.038 · Cited by 922
Microfluidic Bioprinting of Heterogeneous 3D Tissue Constructs Using Low‐Viscosity Bioink
Colosi, C., Shin, S. R., Manoharan, V., Massa, S., Costantini, M., Barbetta, A., Dokmeci, M. R., Dentini, M., & Khademhosseini, A. (2016) · Advanced Materials · doi:10.1002/adma.201503310 · Cited by 863
A comprehensive review on droplet-based bioprinting: Past, present and future
Gudapati, H., Dey, M., & Ozbolat, I. (2016) · Biomaterials · doi:10.1016/j.biomaterials.2016.06.012 · Cited by 859
Biodegradation and biocompatibility of PLA and PLGA microspheres
Anderson, J. M., & Shive, M. S. (2012) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2012.09.004 · Cited by 814
Blaeser, A., Duarte Campos, D. F., Puster, U., Richtering, W., Stevens, M. M., & Fischer, H. (2016) · Advanced Healthcare Materials · doi:10.1002/adhm.201500677 · Cited by 808
Direct writing by way of melt electrospinning
Brown, T. D., Dalton, P. D., & Hutmacher, D. W. (2011) · Advanced Materials · doi:10.1002/adma.201103482 · Cited by 800
Schuurman, W., Levett, P. A., Pot, M. W., van Weeren, P. R., Dhert, W. J. A., Hutmacher, D. W., Melchels, F. P. W., Klein, T. J., & Malda, J. (2013) · Macromolecular Bioscience · doi:10.1002/mabi.201200471 · Cited by 790
Functional Human Vascular Network Generated in Photocrosslinkable Gelatin Methacrylate Hydrogels
Chen, Y., Lin, R., Qi, H., Yang, Y., Bae, H., Melero‐Martin, J. M., & Khademhosseini, A. (2012) · Advanced Functional Materials · doi:10.1002/adfm.201101662 · Cited by 779
Fu, K., Pack, D. W., Klibanov, A. M., & Langer, R. (2000) · Pharmaceutical Research · doi:10.1023/a:1007582911958 · Cited by 764
Reinforcement of hydrogels using three-dimensionally printed microfibres
Visser, J., Melchels, F. P. W., Jeon, J. E., van Bussel, E. M., Kimpton, L. S., Byrne, H. M., Dhert, W. J. A., Dalton, P. D., Hutmacher, D. W., & Malda, J. (2015) · Nature Communications · doi:10.1038/ncomms7933 · Cited by 718
Strategies and Molecular Design Criteria for 3D Printable Hydrogels
Jungst, T., Smolan, W., Schacht, K., Scheibel, T., & Groll, J. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.5b00303 · Cited by 712
The mechanical properties of trabecular bone: Dependence on anatomic location and function
Goldstein, S. A. (1987) · Journal of Biomechanics · doi:10.1016/0021-9290(87)90023-6 · Cited by 687
Direct Human Cartilage Repair Using Three-Dimensional Bioprinting Technology
Cui, X., Breitenkamp, K., Finn, M. G., Lotz, M., & D'Lima, D. D. (2012) · Tissue Engineering Part A · doi:10.1089/ten.tea.2011.0543 · Cited by 686
The Impact of Osteoarthritis: Implications for Research
Buckwalter, J. A., Saltzman, C., & Brown, T. (2004) · Clinical Orthopaedics & Related Research · doi:10.1097/01.blo.0000143938.30681.9d · Cited by 678
Cell-laden hydrogels for osteochondral and cartilage tissue engineering
Yang, J., Zhang, Y. S., Yue, K., & Khademhosseini, A. (2017) · Acta Biomaterialia · doi:10.1016/j.actbio.2017.01.036 · Cited by 652
Depth‐dependent confined compression modulus of full‐thickness bovine articular cartilage
Schinagl, R. M., Gurskis, D., Chen, A. C., & Sah, R. L. (1997) · Journal of Orthopaedic Research · doi:10.1002/jor.1100150404 · Cited by 646
Direct-write bioprinting of cell-laden methacrylated gelatin hydrogels
Bertassoni, L. E., Cardoso, J. C., Manoharan, V., Cristino, A. L., Bhise, N. S., Araujo, W. A., Zorlutuna, P., Vrana, N. E., Ghaemmaghami, A. M., Dokmeci, M. R., et al. (2014) · Biofabrication · doi:10.1088/1758-5082/6/2/024105 · Cited by 642
Xu, T., Binder, K. W., Albanna, M. Z., Dice, D., Zhao, W., Yoo, J. J., & Atala, A. (2012) · Biofabrication · doi:10.1088/1758-5082/5/1/015001 · Cited by 631
Woodfield, T. B. F., Malda, J., de Wijn, J., Péters, F., Riesle, J., & van Blitterswijk, C. A. (2004) · Biomaterials · doi:10.1016/j.biomaterials.2003.10.056 · Cited by 618
Lee, C. H., Cook, J. L., Mendelson, A., Moioli, E. K., Yao, H., & Mao, J. J. (2010) · The Lancet · doi:10.1016/s0140-6736(10)60668-x · Cited by 613
Lee, W., Debasitis, J. C., Lee, V. K., Lee, J.-H., Fischer, K., Edminster, K., Park, J.-K., & Yoo, S.-S. (2009) · Biomaterials · doi:10.1016/j.biomaterials.2008.12.009 · Cited by 578
Zara, J. N., Siu, R. K., Zhang, X., Shen, J., Ngo, R., Lee, M., Li, W., Chiang, M., Chung, J., Kwak, J., et al. (2011) · Tissue Engineering Part A · doi:10.1089/ten.tea.2010.0555 · Cited by 560
Das, S., Pati, F., Choi, Y.-J., Rijal, G., Shim, J.-H., Kim, S. W., Ray, A. R., Cho, D.-W., & Ghosh, S. (2015) · Acta Biomaterialia · doi:10.1016/j.actbio.2014.09.023 · Cited by 553
Kundu, J., Shim, J.-H., Jang, J., Kim, S.-W., & Cho, D.-W. (2015) · Journal of Tissue Engineering and Regenerative Medicine · doi:10.1002/term.1682 · Cited by 552
Labek, G., Thaler, M., Janda, W., Agreiter, M., & Stöckl, B. (2011) · The Journal of Bone and Joint Surgery. British volume · doi:10.1302/0301-620x.93b3.25467 · Cited by 550
Engineering alginate as bioink for bioprinting
Jia, J., Richards, D. J., Pollard, S., Tan, Y., Rodriguez, J., Visconti, R. P., Trusk, T. C., Yost, M. J., Yao, H., Markwald, R. R., et al. (2014) · Acta Biomaterialia · doi:10.1016/j.actbio.2014.06.034 · Cited by 549
Evaluation of hydrogels for bio‐printing applications
Murphy, S. V., Skardal, A., & Atala, A. (2013) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.34326 · Cited by 543
Biocompatible Inkjet Printing Technique for Designed Seeding of Individual Living Cells
Nakamura, M., Kobayashi, A., Takagi, F., Watanabe, A., Hiruma, Y., Ohuchi, K., Iwasaki, Y., Horie, M., Morita, I., & Takatani, S. (2005) · Tissue Engineering · doi:10.1089/ten.2005.11.1658 · Cited by 538
Ouyang, L., Highley, C. B., Sun, W., & Burdick, J. A. (2017) · Advanced Materials · doi:10.1002/adma.201604983 · Cited by 524
Cell migration into scaffolds under co-culture conditions in a microfluidic platform
Chung, S., Sudo, R., Mack, P. J., Wan, C.-R., Vickerman, V., & Kamm, R. D. (2009) · Lab Chip · doi:10.1039/b807585a · Cited by 519
Characterization of cell viability during bioprinting processes
Nair, K., Gandhi, M., Khalil, S., Yan, K. C., Marcolongo, M., Barbee, K., & Sun, W. (2009) · Biotechnology Journal · doi:10.1002/biot.200900004 · Cited by 510
Creating perfused functional vascular channels using 3D bio-printing technology
Lee, V. K., Kim, D. Y., Ngo, H., Lee, Y., Seo, L., Yoo, S.-S., Vincent, P. A., & Dai, G. (2014) · Biomaterials · doi:10.1016/j.biomaterials.2014.05.083 · Cited by 494
Fabrication of microfluidic hydrogels using molded gelatin as a sacrificial element
Golden, A. P., & Tien, J. (2007) · Lab on a Chip · doi:10.1039/b618409j · Cited by 479
Chondrocyte deformation and local tissue strain in articular cartilage: A confocal microscopy study
Guilak, F., Ratcliffe, A., & Mow, V. C. (1995) · Journal of Orthopaedic Research · doi:10.1002/jor.1100130315 · Cited by 475
Biomaterials for Integration with 3-D Bioprinting
Skardal, A., & Atala, A. (2015) · Annals of Biomedical Engineering · doi:10.1007/s10439-014-1207-1 · Cited by 474
Fedorovich, N. E., Alblas, J., de Wijn, J. R., Hennink, W. E., Verbout, A. J., & Dhert, W. J. A. (2007) · Tissue Engineering · doi:10.1089/ten.2006.0175 · Cited by 467
KEMPSON, G., MUIR, H., POLLARD, C., & TUKE, M. (1973) · Biochimica et Biophysica Acta (BBA) - General Subjects · doi:10.1016/0304-4165(73)90093-7 · Cited by 453
Lam, C. X. F., Savalani, M. M., Teoh, S.-H., & Hutmacher, D. W. (2008) · Biomedical Materials · doi:10.1088/1748-6041/3/3/034108 · Cited by 444
A comparison of different bioinks for 3D bioprinting of fibrocartilage and hyaline cartilage
Daly, A. C., Critchley, S. E., Rencsok, E. M., & Kelly, D. J. (2016) · Biofabrication · doi:10.1088/1758-5090/8/4/045002 · Cited by 436
Self-citationRapid Continuous Multimaterial Extrusion Bioprinting
Liu, W., Zhang, Y. S., Heinrich, M. A., De Ferrari, F., Jang, H. L., Bakht, S. M., Alvarez, M. M., Yang, J., Li, Y., Trujillo‐de Santiago, G., et al. (2017) · Advanced Materials · doi:10.1002/adma.201604630 · Cited by 424
Bioprinting for stem cell research
Tasoglu, S., & Demirci, U. (2013) · Trends in Biotechnology · doi:10.1016/j.tibtech.2012.10.005 · Cited by 422
Wang, X., Wenk, E., Zhang, X., Meinel, L., Vunjak-Novakovic, G., & Kaplan, D. L. (2009) · Journal of Controlled Release · doi:10.1016/j.jconrel.2008.10.021 · Cited by 421
Simmons, C. A., Alsberg, E., Hsiong, S., Kim, W. J., & Mooney, D. J. (2004) · Bone · doi:10.1016/j.bone.2004.02.027 · Cited by 413
Fedorovich, N. E., De Wijn, J. R., Verbout, A. J., Alblas, J., & Dhert, W. J. A. (2008) · Tissue Engineering Part A · doi:10.1089/ten.a.2007.0158 · Cited by 410
Bioprinting of hybrid tissue constructs with tailorable mechanical properties
Schuurman, W., Khristov, V, Pot, M. W., van Weeren, P. R., Dhert, W. J. A., & Malda, J. (2011) · Biofabrication · doi:10.1088/1758-5082/3/2/021001 · Cited by 409
3D printing of composite tissue with complex shape applied to ear regeneration
Lee, J.-S., Hong, J. M., Jung, J. W., Shim, J.-H., Oh, J.-H., & Cho, D.-W. (2014) · Biofabrication · doi:10.1088/1758-5082/6/2/024103 · Cited by 407
Fedorovich, N. E., Schuurman, W., Wijnberg, H. M., Prins, H.-J., van Weeren, P. R., Malda, J., Alblas, J., & Dhert, W. J. A. (2012) · Tissue Engineering Part C: Methods · doi:10.1089/ten.tec.2011.0060 · Cited by 403
Cell-based tissue engineering strategies used in the clinical repair of articular cartilage
Huang, B. J., Hu, J. C., & Athanasiou, K. A. (2016) · Biomaterials · doi:10.1016/j.biomaterials.2016.04.018 · Cited by 393
Alsberg, E., Anderson, K. W., Albeiruti, A., Rowley, J. A., & Mooney, D. J. (2002) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.192291499 · Cited by 391
Alginate Sulfate–Nanocellulose Bioinks for Cartilage Bioprinting Applications
Müller, M., Öztürk, E., Arlov, Ø., Gatenholm, P., & Zenobi-Wong, M. (2017) · Annals of Biomedical Engineering · doi:10.1007/s10439-016-1704-5 · Cited by 389
Additive manufacturing of scaffolds with sub-micron filaments via melt electrospinning writing
Hochleitner, G., Jüngst, T., Brown, T. D., Hahn, K., Moseke, C., Jakob, F., Dalton, P. D., & Groll, J. (2015) · Biofabrication · doi:10.1088/1758-5090/7/3/035002 · Cited by 385
Biofabrication of tissue constructs by 3D bioprinting of cell-laden microcarriers
Levato, R., Visser, J., Planell, J. A., Engel, E., Malda, J., & Mateos-Timoneda, M. A. (2014) · Biofabrication · doi:10.1088/1758-5082/6/3/035020 · Cited by 380
Levett, P. A., Melchels, F. P. W., Schrobback, K., Hutmacher, D. W., Malda, J., & Klein, T. J. (2014) · Acta Biomaterialia · doi:10.1016/j.actbio.2013.10.005 · Cited by 375
Cell damage evaluation of thermal inkjet printed Chinese hamster ovary cells
Cui, X., Dean, D., Ruggeri, Z. M., & Boland, T. (2010) · Biotechnology and Bioengineering · doi:10.1002/bit.22762 · Cited by 364
3D Bioprinting of Spatially Heterogeneous Collagen Constructs for Cartilage Tissue Engineering
Rhee, S., Puetzer, J. L., Mason, B. N., Reinhart-King, C. A., & Bonassar, L. J. (2016) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.6b00288 · Cited by 364
Phillippi, J. A., Miller, E., Weiss, L., Huard, J., Waggoner, A., & Campbell, P. (2008) · Stem Cells · doi:10.1634/stemcells.2007-0520 · Cited by 361
Direct Freeform Fabrication of Seeded Hydrogels in Arbitrary Geometries
Cohen, D. L., Malone, E., Lipson, H., & Bonassar, L. J. (2006) · Tissue Engineering · doi:10.1089/ten.2006.12.1325 · Cited by 360
Mouser, V. H. M., Melchels, F. P. W., Visser, J., Dhert, W. J. A., Gawlitta, D., & Malda, J. (2016) · Biofabrication · doi:10.1088/1758-5090/8/3/035003 · Cited by 359
Wüst, S., Godla, M. E., Müller, R., & Hofmann, S. (2014) · Acta Biomaterialia · doi:10.1016/j.actbio.2013.10.016 · Cited by 357
Lee, V. K., Lanzi, A. M., Ngo, H., Yoo, S.-S., Vincent, P. A., & Dai, G. (2014) · Cellular and Molecular Bioengineering · doi:10.1007/s12195-014-0340-0 · Cited by 342
Gao, G., Schilling, A. F., Hubbell, K., Yonezawa, T., Truong, D., Hong, Y., Dai, G., & Cui, X. (2015) · Biotechnology Letters · doi:10.1007/s10529-015-1921-2 · Cited by 341
Vickerman, V., Blundo, J., Chung, S., & Kamm, R. (2008) · Lab on a Chip · doi:10.1039/b802395f · Cited by 340
Bioprinting: inkjet printing proteins and hybrid cell-containing materials and structures
Derby, B. (2008) · Journal of Materials Chemistry · doi:10.1039/b807560c · Cited by 339
Regulating Bone Formation via Controlled Scaffold Degradation
Alsberg, E., Kong, H. J., Hirano, Y., Smith, M. K., Albeiruti, A., & Mooney, D. J. (2003) · Journal of Dental Research · doi:10.1177/154405910308201111 · Cited by 327
Single cell epitaxy by acoustic picolitre droplets
Demirci, U., & Montesano, G. (2007) · Lab on a Chip · doi:10.1039/b704965j · Cited by 326
Biofabrication of multi-material anatomically shaped tissue constructs
Visser, J., Peters, B., Burger, T. J., Boomstra, J., Dhert, W. J. A., Melchels, F. P. W., & Malda, J. (2013) · Biofabrication · doi:10.1088/1758-5082/5/3/035007 · Cited by 313
Bian, L., Hou, C., Tous, E., Rai, R., Mauck, R. L., & Burdick, J. A. (2013) · Biomaterials · doi:10.1016/j.biomaterials.2012.09.052 · Cited by 306
3D cell printing of functional skeletal muscle constructs using skeletal muscle-derived bioink
Choi, Y., Kim, T. G., Jeong, J., Yi, H., Park, J. W., Hwang, W., & Cho, D. (2016) · Advanced Healthcare Materials · doi:10.1002/adhm.201600483 · Cited by 298
Kesti, M., Müller, M., Becher, J., Schnabelrauch, M., D’Este, M., Eglin, D., & Zenobi-Wong, M. (2015) · Acta Biomaterialia · doi:10.1016/j.actbio.2014.09.033 · Cited by 294
Vascularization in Bone Tissue Engineering Constructs
Mercado-Pagán, Á. E., Stahl, A. M., Shanjani, Y., & Yang, Y. (2015) · Annals of Biomedical Engineering · doi:10.1007/s10439-015-1253-3 · Cited by 288
Hyaluronic Acid and Dextran-Based Semi-IPN Hydrogels as Biomaterials for Bioprinting
Pescosolido, L., Schuurman, W., Malda, J., Matricardi, P., Alhaique, F., Coviello, T., van Weeren, P. R., Dhert, W. J. A., Hennink, W. E., & Vermonden, T. (2011) · Biomacromolecules · doi:10.1021/bm200178w · Cited by 280
Chen, J., Chen, H., Li, P., Diao, H., Zhu, S., Dong, L., Wang, R., Guo, T., Zhao, J., & Zhang, J. (2011) · Biomaterials · doi:10.1016/j.biomaterials.2011.03.041 · Cited by 274
3D Bioprinting of Developmentally Inspired Templates for Whole Bone Organ Engineering
Daly, A. C., Cunniffe, G. M., Sathy, B. N., Jeon, O., Alsberg, E., & Kelly, D. J. (2016) · Advanced Healthcare Materials · doi:10.1002/adhm.201600182 · Cited by 272
Self-citationYu, Y., Moncal, K. K., Li, J., Peng, W., Rivero, I., Martin, J. A., & Ozbolat, I. T. (2016) · Scientific Reports · doi:10.1038/srep28714 · Cited by 269
Bian, L., Zhai, D. Y., Mauck, R. L., & Burdick, J. A. (2011) · Tissue Engineering Part A · doi:10.1089/ten.tea.2010.0531 · Cited by 267
Chen, S. S., Falcovitz, Y. H., Schneiderman, R., Maroudas, A., & Sah, R. L. (2001) · Osteoarthritis and Cartilage · doi:10.1053/joca.2001.0424 · Cited by 266
Chen, A. C., Bae, W. C., Schinagl, R. M., & Sah, R. L. (2001) · Journal of Biomechanics · doi:10.1016/s0021-9290(00)00170-6 · Cited by 254
Shim, J.-H., Jang, K.-M., Hahn, S. K., Park, J. Y., Jung, H., Oh, K., Park, K. M., Yeom, J., Park, S. H., Kim, S. W., et al. (2016) · Biofabrication · doi:10.1088/1758-5090/8/1/014102 · Cited by 251
3D bioprinting of BM-MSCs-loaded ECM biomimetic hydrogels for in vitro neocartilage formation
Costantini, M., Idaszek, J., Szöke, K., Jaroszewicz, J., Dentini, M., Barbetta, A., Brinchmann, J. E., & Święszkowski, W. (2016) · Biofabrication · doi:10.1088/1758-5090/8/3/035002 · Cited by 250
Seyednejad, H., Gawlitta, D., Kuiper, R. V., de Bruin, A., van Nostrum, C. F., Vermonden, T., Dhert, W. J. A., & Hennink, W. E. (2012) · Biomaterials · doi:10.1016/j.biomaterials.2012.03.002 · Cited by 245
Biofabrication of Cell‐Loaded 3D Spider Silk Constructs
Schacht, K., Jüngst, T., Schweinlin, M., Ewald, A., Groll, J., & Scheibel, T. (2015) · Angewandte Chemie International Edition · doi:10.1002/anie.201409846 · Cited by 232
Bioprinting Complex Cartilaginous Structures with Clinically Compliant Biomaterials
Kesti, M., Eberhardt, C., Pagliccia, G., Kenkel, D., Grande, D., Boss, A., & Zenobi‐Wong, M. (2015) · Advanced Functional Materials · doi:10.1002/adfm.201503423 · Cited by 228
Poldervaart, M. T., Gremmels, H., van Deventer, K., Fledderus, J. O., Öner, F. C., Verhaar, M. C., Dhert, W. J. A., & Alblas, J. (2014) · Journal of Controlled Release · doi:10.1016/j.jconrel.2014.04.007 · Cited by 224
Development and characterisation of a new bioink for additive tissue manufacturing
Melchels, F. P. W., Dhert, W. J. A., Hutmacher, D. W., & Malda, J. (2014) · Journal of Materials Chemistry B · doi:10.1039/c3tb21280g · Cited by 222
Lee, S. J., Lee, D., Yoon, T. R., Kim, H. K., Jo, H. H., Park, J. S., Lee, J. H., Kim, W. D., Kwon, I. K., & Park, S. A. (2016) · Acta Biomaterialia · doi:10.1016/j.actbio.2016.02.006 · Cited by 221
Drop-on-demand printing of cells and materials for designer tissue constructs
Boland, T., Tao, X., Damon, B. J., Manley, B., Kesari, P., Jalota, S., & Bhaduri, S. (2007) · Materials Science and Engineering: C · doi:10.1016/j.msec.2006.05.047 · Cited by 220
Rodriguez, M. J., Brown, J., Giordano, J., Lin, S. J., Omenetto, F. G., & Kaplan, D. L. (2017) · Biomaterials · doi:10.1016/j.biomaterials.2016.11.046 · Cited by 220
Madry, H., Kaul, G., Cucchiarini, M., Stein, U., Zurakowski, D., Remberger, K., Menger, M. D., Kohn, D., & Trippel, S. B. (2005) · Gene Therapy · doi:10.1038/sj.gt.3302515 · Cited by 216
Unger, R. E., Ghanaati, S., Orth, C., Sartoris, A., Barbeck, M., Halstenberg, S., Motta, A., Migliaresi, C., & Kirkpatrick, C. J. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.05.057 · Cited by 214
Park, J. Y., Choi, J.-C., Shim, J.-H., Lee, J.-S., Park, H., Kim, S. W., Doh, J., & Cho, D.-W. (2014) · Biofabrication · doi:10.1088/1758-5082/6/3/035004 · Cited by 213
Repair and regeneration of osteochondral defects in the articular joints
Swieszkowski, W., Tuan, B. H. S., Kurzydlowski, K. J., & Hutmacher, D. W. (2007) · Biomolecular Engineering · doi:10.1016/j.bioeng.2007.07.014 · Cited by 212
Faulkner-Jones, A., Greenhough, S., A King, J., Gardner, J., Courtney, A., & Shu, W. (2013) · Biofabrication · doi:10.1088/1758-5082/5/1/015013 · Cited by 212
Multi-layered collagen-based scaffolds for osteochondral defect repair in rabbits
Levingstone, T. J., Thompson, E., Matsiko, A., Schepens, A., Gleeson, J. P., & O’Brien, F. J. (2016) · Acta Biomaterialia · doi:10.1016/j.actbio.2015.12.034 · Cited by 209
Di Luca, A., Ostrowska, B., Lorenzo-Moldero, I., Lepedda, A., Swieszkowski, W., Van Blitterswijk, C., & Moroni, L. (2016) · Scientific Reports · doi:10.1038/srep22898 · Cited by 207
Sustained Release of BMP-2 in Bioprinted Alginate for Osteogenicity in Mice and Rats
Poldervaart, M. T., Wang, H., van der Stok, J., Weinans, H., Leeuwenburgh, S. C. G., Öner, F. C., Dhert, W. J. A., & Alblas, J. (2013) · PLoS ONE · doi:10.1371/journal.pone.0072610 · Cited by 202
Shao, X. X., Hutmacher, D. W., Ho, S. T., Goh, J. C. H., & Lee, E. H. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2005.07.040 · Cited by 200
Malda, J., Woodfield, T. B. F., van der Vloodt, F., Kooy, F. K., Martens, D. E., Tramper, J., Blitterswijk, C. A. V., & Riesle, J. (2004) · Biomaterials · doi:10.1016/j.biomaterials.2004.01.028 · Cited by 200
Martínez-Vázquez, F. J., Cabañas, M. V., Paris, J. L., Lozano, D., & Vallet-Regí, M. (2015) · Acta Biomaterialia · doi:10.1016/j.actbio.2014.12.021 · Cited by 196
Park, J. Y., Shim, J.-H., Choi, S.-A., Jang, J., Kim, M., Lee, S. H., & Cho, D.-W. (2015) · Journal of Materials Chemistry B · doi:10.1039/c5tb00637f · Cited by 188
Biofabricated soft network composites for cartilage tissue engineering
Bas, O., De-Juan-Pardo, E. M., Meinert, C., D’Angella, D., Baldwin, J. G., Bray, L. J., Wellard, R. M., Kollmannsberger, S., Rank, E., Werner, C., et al. (2017) · Biofabrication · doi:10.1088/1758-5090/aa6b15 · Cited by 188
Erickson, I. E., Huang, A. H., Sengupta, S., Kestle, S., Burdick, J. A., & Mauck, R. L. (2009) · Osteoarthritis and Cartilage · doi:10.1016/j.joca.2009.07.003 · Cited by 186
Cui, H., Zhu, W., Nowicki, M., Zhou, X., Khademhosseini, A., & Zhang, L. G. (2016) · Advanced Healthcare Materials · doi:10.1002/adhm.201600505 · Cited by 185
Luo, Y., Wu, C., Lode, A., & Gelinsky, M. (2012) · Biofabrication · doi:10.1088/1758-5082/5/1/015005 · Cited by 182
3D Bioprinting Using a Templated Porous Bioink
Armstrong, J. P. K., Burke, M., Carter, B. M., Davis, S. A., & Perriman, A. W. (2016) · Advanced Healthcare Materials · doi:10.1002/adhm.201600022 · Cited by 182
Sultana, N., & Wang, M. (2008) · Journal of Materials Science: Materials in Medicine · doi:10.1007/s10856-007-3214-3 · Cited by 181
Curtin, C. M., Tierney, E. G., McSorley, K., Cryan, S., Duffy, G. P., & O'Brien, F. J. (2015) · Advanced Healthcare Materials · doi:10.1002/adhm.201400397 · Cited by 177
Fibre pulsing during melt electrospinning writing
Hochleitner, G., Youssef, A., Hrynevich, A., Haigh, J. N., Jungst, T., Groll, J., & Dalton, P. D. (2016) · BioNanoMaterials · doi:10.1515/bnm-2015-0022 · Cited by 177
Olubamiji, A. D., Izadifar, Z., Si, J. L., Cooper, D. M. L., Eames, B. F., & Chen, D. X. (2016) · Biofabrication · doi:10.1088/1758-5090/8/2/025020 · Cited by 174
Duarte Campos, D. F., Blaeser, A., Buellesbach, K., Sen, K. S., Xun, W., Tillmann, W., & Fischer, H. (2016) · Advanced Healthcare Materials · doi:10.1002/adhm.201501033 · Cited by 173
A Printable Photopolymerizable Thermosensitive p(HPMAm‐lactate)‐PEG Hydrogel for Tissue Engineering
Censi, R., Schuurman, W., Malda, J., di Dato, G., Burgisser, P. E., Dhert, W. J. A., van Nostrum, C. F., di Martino, P., Vermonden, T., & Hennink, W. E. (2011) · Advanced Functional Materials · doi:10.1002/adfm.201002428 · Cited by 171
Levingstone, T. J., Ramesh, A., Brady, R. T., Brama, P. A. J., Kearney, C., Gleeson, J. P., & O'Brien, F. J. (2016) · Biomaterials · doi:10.1016/j.biomaterials.2016.02.006 · Cited by 166
Wang, W., Li, B., Yang, J., Xin, L., Li, Y., Yin, H., Qi, Y., Jiang, Y., Ouyang, H., & Gao, C. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.08.018 · Cited by 159
Yeo, M., Lee, J.-S., Chun, W., & Kim, G. H. (2016) · Biomacromolecules · doi:10.1021/acs.biomac.5b01764 · Cited by 159
Boere, K. W. M., Visser, J., Seyednejad, H., Rahimian, S., Gawlitta, D., van Steenbergen, M. J., Dhert, W. J. A., Hennink, W. E., Vermonden, T., & Malda, J. (2014) · Acta Biomaterialia · doi:10.1016/j.actbio.2014.02.041 · Cited by 155
Rapid Prototyping Three-Dimensional Cell/Gelatin/Fibrinogen Constructs for Medical Regeneration
Xu, W., Wang, X., Yan, Y., Zheng, W. J., Xiong, Z., Lin, F., Wu, R., & Zhang, R. (2007) · Journal of Bioactive and Compatible Polymers · doi:10.1177/0883911507079451 · Cited by 155
Co-culture in cartilage tissue engineering
Hendriks, J., Riesle, J., & van Blitterswijk, C. (2007) · Journal of Tissue Engineering and Regenerative Medicine · doi:10.1002/term.19 · Cited by 155
Gonzalez‐Fernandez, T., Tierney, E. G., Cunniffe, G. M., O’Brien, F. J., & Kelly, D. J. (2016) · Tissue Engineering Part A · doi:10.1089/ten.tea.2015.0576 · Cited by 154
Self-citationRapid-prototyped PLGA/β-TCP/hydroxyapatite nanocomposite scaffolds in a rabbit femoral defect model
Kim, J., McBride, S., Tellis, B. C., Alvarez, P., Song, Y. H., Dean, D. D., Sylvia, V. L., Elgendy, H. M., Ong, J. L., & Hollinger, J. O. (2012) · Biofabrication · doi:10.1088/1758-5082/4/2/025003 · Cited by 153
3D bioprinting of BMSC-laden methacrylamide gelatin scaffolds with CBD-BMP2-collagen microfibers
Du, M., Chen, B., Meng, Q., Liu, S., Zheng, X., Zhang, C., Wang, H., Li, H., Wang, N., & Dai, J. (2015) · Biofabrication · doi:10.1088/1758-5090/7/4/044104 · Cited by 152
Holmes, B. B., Bulusu, K. V., Plesniak, M. W., & Zhang, L. G. (2016) · Nanotechnology · doi:10.1088/0957-4484/27/6/064001 · Cited by 152
Fang, Y., Frampton, J. P., Raghavan, S. A., Sabahi‐Kaviani, R., Luker, G. D., Deng, C. X., & Takayama, S. (2012) · Tissue Engineering Part C Methods · doi:10.1089/ten.tec.2011.0709 · Cited by 145
Ren, X., Wang, F., Chen, C., Gong, X., Yin, L., & Yang, L. (2016) · BMC Musculoskeletal Disorders · doi:10.1186/s12891-016-1130-8 · Cited by 143
Park, S. H., Park, D. S., Shin, J. W., Kang, Y. G., Kim, H. K., Yoon, T. R., & Shin, J. (2012) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-012-4738-8 · Cited by 138
Custom-made composite scaffolds for segmental defect repair in long bones
Reichert, J. C., Wullschleger, M., Cipitria, A., Lienau, J., Cheng, T. K., Schuetz, M., Duda, G. N., Nöth, U. A., Eulert, J., & Hutmacher, D. W. (2010) · International Orthopaedics · doi:10.1007/s00264-010-1146-x · Cited by 137
Abbadessa, A., Mouser, V. H. M., Blokzijl, M. M., Gawlitta, D., Dhert, W. J. A., Hennink, W. E., Malda, J., & Vermonden, T. (2016) · Biomacromolecules · doi:10.1021/acs.biomac.6b00366 · Cited by 135
Micro-precise spatiotemporal delivery system embedded in 3D printing for complex tissue regeneration
Tarafder, S., Koch, A., Jun, Y., Chou, C., Awadallah, M. R., & Lee, C. H. (2016) · Biofabrication · doi:10.1088/1758-5090/8/2/025003 · Cited by 126
Mouser, V. H. M., Abbadessa, A., Levato, R., Hennink, W. E., Vermonden, T., Gawlitta, D., & Malda, J. (2017) · Biofabrication · doi:10.1088/1758-5090/aa6265 · Cited by 126
Recent progress in cartilage tissue engineering
Keeney, M., Lai, J. H., & Yang, F. (2011) · Current Opinion in Biotechnology · doi:10.1016/j.copbio.2011.04.003 · Cited by 125
Scaffold-mediated lentiviral transduction for functional tissue engineering of cartilage
Brunger, J. M., Huynh, N. P. T., Guenther, C. M., Pérez‐Piñera, P., Moutos, F. T., Sanchez‐Adams, J., Gersbach, C. A., & Guilak, F. (2014) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1321744111 · Cited by 123
Ding, C., Qiao, Z., Jiang, W., Li, H., Wei, J., Zhou, G., & Dai, K. (2013) · Biomaterials · doi:10.1016/j.biomaterials.2013.05.038 · Cited by 123
Microcarriers and Their Potential in Tissue Regeneration
Hewings-Martin, Y., Eldardiri, M., Lawrence‐Watt, D. J., & Sharpe, J. R. (2010) · Tissue Engineering Part B Reviews · doi:10.1089/ten.teb.2010.0559 · Cited by 121
Cui, X., Breitenkamp, K., Lotz, M., & DʼLima, D. D. (2012) · Biotechnology and Bioengineering · doi:10.1002/bit.24488 · Cited by 120
Shim, J., Yoon, M.-C., Jeong, C.-M., et al. (2014) · Biomedical Materials · doi:10.1088/1748-6041/9/6/065006 · Cited by 119
Large-scale time series microscopy of neovessel growth during angiogenesis
Utzinger, U., Baggett, B. K., Weiss, J. A., Hoying, J. B., & Edgar, L. T. (2015) · Angiogenesis · doi:10.1007/s10456-015-9461-x · Cited by 115
Inkjet-Mediated Gene Transfection into Living Cells Combined with Targeted Delivery
Xu, T., Rohozinski, J., Zhao, W., Moorefield, E., Atala, A., & Yoo, J. J. (2008) · Tissue Engineering Part A · doi:10.1089/ten.tea.2008.0095 · Cited by 115
Wang, X., Tolba, E., Schröder, H. C., Neufurth, M., Feng, Q., Diehl‐Seifert, B., & Müller, W. E. G. (2014) · PLoS ONE · doi:10.1371/journal.pone.0112497 · Cited by 114
Luca, A. D., Szlązak, K., Lorenzo‐Moldero, I., Ghebes, C. A., Lepedda, A. J., Święszkowski, W., van Blitterswijk, C., & Moroni, L. (2016) · Acta Biomaterialia · doi:10.1016/j.actbio.2016.03.014 · Cited by 114
Three-Dimensional Bioprinting and Its Potential in the Field of Articular Cartilage Regeneration
Mouser, V. H. M., Levato, R., Bonassar, L. J., DʼLima, D. D., Grande, D. A., Klein, T. J., Saris, D. B. F., Zenobi‐Wong, M., Gawlitta, D., & Malda, J. (2016) · Cartilage · doi:10.1177/1947603516665445 · Cited by 114
Ahn, S., Lee, H., Bonassar, L. J., & Kim, G. (2012) · Biomacromolecules · doi:10.1021/bm3011352 · Cited by 112
Cell and protein compatible 3D bioprinting of mechanically strong constructs for bone repair
Sawkins, M. J., Mistry, P., Brown, B. N., Shakesheff, K. M., Bonassar, L. J., & Yang, J. (2015) · Biofabrication · doi:10.1088/1758-5090/7/3/035004 · Cited by 110
Fedorovich, N. E., Kuipers, E., Gawlitta, D., Dhert, W. J. A., & Alblas, J. (2011) · Tissue Engineering Part A · doi:10.1089/ten.tea.2011.0001 · Cited by 109
Porous bioprinted constructs in BMP-2 non-viral gene therapy for bone tissue engineering
Loozen, L. D., Wegman, F., Öner, F. C., Dhert, W. J. A., & Alblas, J. (2013) · Journal of Materials Chemistry B · doi:10.1039/c3tb21093f · Cited by 103
Engineering stem cell fate with biochemical and biomechanical properties of microcarriers
Sart, S., Agathos, S. N., & Li, Y. (2013) · Biotechnology Progress · doi:10.1002/btpr.1825 · Cited by 103
Biochemical and Physical Signal Gradients in Hydrogels to Control Stem Cell Behavior
Jeon, O., Alt, D. S., Linderman, S. W., & Alsberg, E. (2013) · Advanced Materials · doi:10.1002/adma.201302364 · Cited by 102
Hong, S., Sycks, D. G., Chan, H. F., Lin, S., López, G. P., Guilak, F., Leong, K. W., & Zhao, X. (2015) · Advanced Materials · doi:10.1002/adma.201570182 · Cited by 99
Öztürk, E., Arlov, Ø., Aksel, S., Li, L., Ornitz, D. M., Skjåk‐Bræk, G., & Zenobi‐Wong, M. (2016) · Advanced Functional Materials · doi:10.1002/adfm.201600092 · Cited by 97
Blaeser, A., Campos, D. F. D., Weber, M. H., Neuß, S., Theek, B., Fischer, H., & Jahnen‐Dechent, W. (2013) · BioResearch open access · doi:10.1089/biores.2013.0031 · Cited by 95
Steward, A. J., Wagner, D. R., & Kelly, D. J. (2013) · European Cells and Materials · doi:10.22203/ecm.v025a12 · Cited by 94
Self-citationOdedra, D., Chiu, L. L. Y., Shoichet, M. S., & Radisic, M. (2011) · Acta Biomaterialia · doi:10.1016/j.actbio.2011.05.002 · Cited by 89
Miller, E. D., Phillippi, J. A., Fisher, G. W., Campbell, P. G., Walker, L. M., & Weiss, L. E. (2009) · Combinatorial Chemistry & High Throughput Screening · doi:10.2174/138620709788681907 · Cited by 88
The role of the superficial region in determining the dynamic properties of articular cartilage
Gannon, A. R., Nagel, T., & Kelly, D. J. (2012) · Osteoarthritis and Cartilage · doi:10.1016/j.joca.2012.08.005 · Cited by 86
Self-citationGuex, A. G., Hegemann, D., Giraud, M., Tevaearai, H. T., Popa, A., Rossi, R. M., & Fortunato, G. (2014) · Colloids and Surfaces B Biointerfaces · doi:10.1016/j.colsurfb.2014.10.016 · Cited by 84
Mesenchymal cells condensation-inducible mesh scaffolds for cartilage tissue engineering
Kim, I. G., Ko, J., Lee, H. R., Hee, S., & Park, K. (2016) · Biomaterials · doi:10.1016/j.biomaterials.2016.01.048 · Cited by 82
Cell Sources for Articular Cartilage Repair Strategies: Shifting from Monocultures to Cocultures
Leijten, J., Georgi, N., Wu, L., van Blitterswijk, C., & Karperien, M. (2012) · Tissue Engineering Part B Reviews · doi:10.1089/ten.teb.2012.0273 · Cited by 75
Ge, Z., Wang, L., Heng, B. C., Tian, X., Lü, K., Fan, V., Yeo, J. F., Cao, T., & Tan, E. X. X. (2008) · Journal of Biomaterials Applications · doi:10.1177/0885328208094301 · Cited by 70
Albro, M. B., Nims, R. J., Durney, K. M., Cigan, A. D., Shim, J. J., Vunjak‐Novakovic, G., Hung, C. T., & Ateshian, G. A. (2015) · Biomaterials · doi:10.1016/j.biomaterials.2015.10.018 · Cited by 70
Schuurman, W., Klein, T. J., Dhert, W. J. A., van Weeren, P. R., Hutmacher, D. W., & Malda, J. (2012) · Journal of Tissue Engineering and Regenerative Medicine · doi:10.1002/term.1638 · Cited by 64
Lee, Y., Kwon, J., Khang, G., & Lee, D. (2012) · Tissue Engineering Part A · doi:10.1089/ten.tea.2012.0001 · Cited by 64
Luca, A. D., Longoni, A., Criscenti, G., Lorenzo‐Moldero, I., Gunnewiek, M. K., Vancso, G. J., van Blitterswijk, C., Mota, C., & Moroni, L. (2016) · Biofabrication · doi:10.1088/1758-5090/8/1/015014 · Cited by 64
A Facile Method to Fabricate Hydrogels with Microchannel-Like Porosity for Tissue Engineering
Hammer, J. A., Han, L., Tong, X., & Yang, F. (2013) · Tissue Engineering Part C Methods · doi:10.1089/ten.tec.2013.0176 · Cited by 60
Heo, S.-J., Kim, S.-E., Wei, J., Kim, D. H., Hyun, Y.-T., Yun, H., Kim, H. K., Yoon, T. R., Kim, S.-H., Park, S., et al. (2008) · Tissue Engineering Part A · doi:10.1089/ten.tea.2008.0190 · Cited by 58
Wang, X., Song, Y., Liu, Y., Sun, Y.-C., Wang, Y., Wang, Y., & Lyu, P. (2016) · PLoS ONE · doi:10.1371/journal.pone.0157214 · Cited by 57
Physical and Chemical Signals That Promote Vascularization of Capillary-Scale Channels
Linville, R. M., Boland, N. F., Covarrubias, G., Price, G. M., & Tien, J. (2016) · Cellular and Molecular Bioengineering · doi:10.1007/s12195-016-0429-8 · Cited by 54
Moeinzadeh, S., Shariati, S. R. P., & Jabbari, E. (2016) · Biomaterials · doi:10.1016/j.biomaterials.2016.03.034 · Cited by 54
Wegman, F., Geuze, R. E., van der Helm, Y. J. M., Öner, F. C., Dhert, W. J. A., & Alblas, J. (2012) · Journal of Tissue Engineering and Regenerative Medicine · doi:10.1002/term.1571 · Cited by 53
Engineering a vascularized collagen-β-tricalcium phosphate graft using an electrochemical approach
Kang, Y., Mochizuki, N., Khademhosseini, A., Fukuda, J., & Yang, Y. (2014) · Acta Biomaterialia · doi:10.1016/j.actbio.2014.09.035 · Cited by 53
Tissue engineering scaled-up, anatomically shaped osteochondral constructs for joint resurfacing
Mesallati, T., Sheehy, E. J., Vinardell, T., Buckley, C. T., & Kelly, D. J. (2015) · European Cells and Materials · doi:10.22203/ecm.v030a12 · Cited by 46
Self-citationTissue Engineering Whole Bones Through Endochondral Ossification: Regenerating the Distal Phalanx
Sheehy, E. J., Mesallati, T., Kelly, L., Vinardell, T., Buckley, C. T., & Kelly, D. J. (2015) · BioResearch open access · doi:10.1089/biores.2015.0014 · Cited by 45
Self-citationSeyednejad, H., Vermonden, T., Fedorovich, N. E., van Eijk, R., van Steenbergen, M. J., Dhert, W. J. A., van Nostrum, C. F., & Hennink, W. E. (2009) · Biomacromolecules · doi:10.1021/bm900693p · Cited by 45
Cunniffe, G. M., Vinardell, T., Thompson, E. M., Daly, A. C., Matsiko, A., O’Brien, F. J., & Kelly, D. J. (2015) · European Polymer Journal · doi:10.1016/j.eurpolymj.2015.07.021 · Cited by 43
Self-citationKim, G., & Son, J. G. (2008) · Applied Physics A · doi:10.1007/s00339-008-4959-3 · Cited by 43
Cited by
Printability and shape fidelity of bioinks in 3D bioprinting
Schwab, A., Levato, R., D’Este, M., Piluso, S., Eglin, D., & Malda, J. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00084 · Cited by 1,359
Scaffold Fabrication Technologies and Structure/Function Properties in Bone Tissue Engineering
Collins, M. N., Ren, G., Young, K., Pina, S., Reis, R. L., & Oliveira, J. M. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202010609 · Cited by 867
3D printing of hydrogels: Rational design strategies and emerging biomedical applications
Li, J., Wu, C., Chu, P. K., & Gelinsky, M. (2020) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2020.100543 · Cited by 862
3D bioprinting of tissues and organs for regenerative medicine
Vijayavenkataraman, S., Yan, W.-C., Lu, W. F., Wang, C.-H., & Fuh, J. Y. H. (2018) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2018.07.004 · Cited by 630
Effect of the nano/microscale structure of biomaterial scaffolds on bone regeneration
Zhu, L., Luo, D., & Liu, Y. (2020) · International Journal of Oral Science · doi:10.1038/s41368-020-0073-y · Cited by 458
Metadata
- Authors
- Daly, A. C., Freeman, F. E., Gonzalez‐Fernandez, T., Critchley, S. E., Nulty, J., & Kelly, D. J.
- Venue
- Advanced Healthcare Materials
- Publisher
- Wiley
- Published
- 2017-08-14
- Volume
- 6
- Issue
- 22
- ISSN
- 2192-2640 (ISSN-L)
- 2192-2659
- OpenAlex
- W2746536920
- Cited by
- 334
- References
- 202
- FWCI
- 11.06
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.