The DOI matches its Crossref record; 211 of the 211 references it cites were found in a registry or an index.
Emerging Biofabrication Strategies for Engineering Complex Tissue Constructs
Abstract
The demand for organ transplantation and repair, coupled with a shortage of available donors, poses an urgent clinical need for the development of innovative treatment strategies for long‐term repair and regeneration of injured or diseased tissues and organs. Bioengineering organs, by growing patient‐derived cells in biomaterial scaffolds in the presence of pertinent physicochemical signals, provides a promising solution to meet this demand. However, recapitulating the structural and cytoarchitectural complexities of native tissues in vitro remains a significant challenge to be addressed. Through tremendous efforts over the past decade, several innovative biofabrication strategies have been developed to overcome these challenges. This review highlights recent work on emerging three‐dimensional bioprinting and textile techniques, compares the advantages and shortcomings of these approaches, outlines the use of common biomaterials and advanced hybrid scaffolds, and describes several design considerations including the structural, physical, biological, and economical parameters that are crucial for the fabrication of functional, complex, engineered tissues. Finally, the applications of these biofabrication strategies in neural, skin, connective, and muscle tissue engineering are explored.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Langer, R., & Vacanti, J. P. (1993) · Science · doi:10.1126/science.8493529 · Cited by 9,893
3D bioprinting of tissues and organs
Murphy, S. V., & Atala, A. (2014) · Nature Biotechnology · doi:10.1038/nbt.2958 · Cited by 7,034
Bioinspired structural materials
Wegst, U. G. K., Bai, H., Saiz, E., Tomsia, A. P., & Ritchie, R. O. (2015) · Nature Materials · doi:10.1038/nmat4089 · Cited by 4,721
Biodegradable and bioactive porous polymer/inorganic composite scaffolds for bone tissue engineering
Rezwan, K., Chen, Q. Z., Blaker, J. J., & Boccaccini, A. R. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2006.01.039 · Cited by 3,839
THE MATERIAL BONE: Structure-Mechanical Function Relations
Weiner, S., & Wagner, H. D. (1998) · Annual Review of Materials Science · doi:10.1146/annurev.matsci.28.1.271 · Cited by 2,724
A 3D bioprinting system to produce human-scale tissue constructs with structural integrity
Kang, H.-W., Lee, S. J., Ko, I. K., Kengla, C., Yoo, J. J., & Atala, A. (2016) · Nature Biotechnology · doi:10.1038/nbt.3413 · Cited by 2,622
A review on stereolithography and its applications in biomedical engineering
Melchels, F. P. W., Feijen, J., & Grijpma, D. W. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.04.050 · Cited by 2,457
The control of human mesenchymal cell differentiation using nanoscale symmetry and disorder
Dalby, M. J., Gadegaard, N., Tare, R., Andar, A., Riehle, M. O., Herzyk, P., Wilkinson, C. D. W., & Oreffo, R. O. C. (2007) · Nature Materials · doi:10.1038/nmat2013 · Cited by 2,416
3D bioprinting of vascularized, heterogeneous cell-laden tissue constructs
Kolesky, D. B., Truby, R. L., Gladman, A. S., Busbee, T. A., Homan, K. A., & Lewis, J. A. (2014) · Advanced Materials · doi:10.1002/adma.201305506 · Cited by 2,102
Application of chitosan-based polysaccharide biomaterials in cartilage tissue engineering: a review
Francis Suh, J.-K., & Matthew, H. W. T. (2000) · Biomaterials · doi:10.1016/s0142-9612(00)00126-5 · Cited by 1,997
Designing Cell-Compatible Hydrogels for Biomedical Applications
Seliktar, D. (2012) · Science · doi:10.1126/science.1214804 · Cited by 1,923
Printing three-dimensional tissue analogues with decellularized extracellular matrix bioink
Pati, F., Jang, J., Ha, D.-H., Won Kim, S., Rhie, J.-W., Shim, J.-H., Kim, D.-H., & Cho, D.-W. (2014) · Nature Communications · doi:10.1038/ncomms4935 · Cited by 1,904
25th Anniversary Article: Engineering Hydrogels for Biofabrication
Malda, J., Visser, J., Melchels, F. P., Jüngst, T., Hennink, W. E., Dhert, W. J. A., Groll, J., & Hutmacher, D. W. (2013) · Advanced Materials · doi:10.1002/adma.201302042 · Cited by 1,901
Yang, F., Murugan, R., Wang, S., & Ramakrishna, S. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2004.06.051 · Cited by 1,804
3D bioprinting for engineering complex tissues
Mandrycky, C., Wang, Z., Kim, K., & Kim, D.-H. (2016) · Biotechnology Advances · doi:10.1016/j.biotechadv.2015.12.011 · Cited by 1,754
Bone structure and formation: A new perspective
Olszta, M. J., Cheng, X., Jee, S. S., Kumar, R., Kim, Y.-Y., Kaufman, M. J., Douglas, E. P., & Gower, L. B. (2007) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2007.05.001 · Cited by 1,563
Three-dimensional bioprinting of thick vascularized tissues
Kolesky, D. B., Homan, K. A., Skylar-Scott, M. A., & Lewis, J. A. (2016) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1521342113 · Cited by 1,492
Hutmacher, D. W., Schantz, T., Zein, I., Ng, K. W., Teoh, S. H., & Tan, K. C. (2001) · Journal of Biomedical Materials Research · doi:10.1002/1097-4636(200105)55:2<203::aid-jbm1007>3.0.co;2-7 · Cited by 1,409
Nanotechnological strategies for engineering complex tissues
Dvir, T., Timko, B. P., Kohane, D. S., & Langer, R. (2011) · Nature Nanotechnology · doi:10.1038/nnano.2010.246 · Cited by 1,367
Scaffold-free vascular tissue engineering using bioprinting
Norotte, C., Marga, F. S., Niklason, L. E., & Forgacs, G. (2009) · Biomaterials · doi:10.1016/j.biomaterials.2009.06.034 · Cited by 1,339
Young's modulus of trabecular and cortical bone material: Ultrasonic and microtensile measurements
Rho, J. Y., Ashman, R. B., & Turner, C. H. (1993) · Journal of Biomechanics · doi:10.1016/0021-9290(93)90042-d · Cited by 1,283
Organ printing: Tissue spheroids as building blocks
Mironov, V., Visconti, R. P., Kasyanov, V., Forgacs, G., Drake, C. J., & Markwald, R. R. (2009) · Biomaterials · doi:10.1016/j.biomaterials.2008.12.084 · Cited by 1,238
Neural Tissue Engineering: Strategies for Repair and Regeneration
Schmidt, C. E., & Leach, J. B. (2003) · Annual Review of Biomedical Engineering · doi:10.1146/annurev.bioeng.5.011303.120731 · Cited by 1,237
Structure of the tendon connective tissue
Kannus, P. (2000) · Scandinavian Journal of Medicine & Science in Sports · doi:10.1034/j.1600-0838.2000.010006312.x · Cited by 1,148
Review: tissue engineering for regeneration of articular cartilage
Temenoff, J. S., & Mikos, A. G. (2000) · Biomaterials · doi:10.1016/s0142-9612(99)00213-6 · Cited by 1,052
Kisiday, J., Jin, M., Kurz, B., Hung, H., Semino, C., Zhang, S., & Grodzinsky, A. J. (2002) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.142309999 · Cited by 1,045
Inkjet printing of viable mammalian cells
Xu, T., Jin, J., Gregory, C., Hickman, J. J., & Boland, T. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2004.04.011 · Cited by 1,035
Billiet, T., Gevaert, E., De Schryver, T., Cornelissen, M., & Dubruel, P. (2014) · Biomaterials · doi:10.1016/j.biomaterials.2013.09.078 · Cited by 1,015
3D Bioprinting of heterogeneous aortic valve conduits with alginate/gelatin hydrogels
Duan, B., Hockaday, L. A., Kang, K. H., & Butcher, J. T. (2013) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.34420 · Cited by 1,002
Physiological function of connective tissue polysaccharides.
Comper, W. D., & Laurent, T. C. (1978) · Physiological Reviews · doi:10.1152/physrev.1978.58.1.255 · Cited by 991
Bioprinting 3D microfibrous scaffolds for engineering endothelialized myocardium and heart-on-a-chip
Zhang, Y. S., Arneri, A., Bersini, S., Shin, S.-R., Zhu, K., Goli-Malekabadi, Z., Aleman, J., Colosi, C., Busignani, F., Dell'Erba, V., et al. (2016) · Biomaterials · doi:10.1016/j.biomaterials.2016.09.003 · Cited by 951
Hydrogel bioprinted microchannel networks for vascularization of tissue engineering constructs
Bertassoni, L. E., Cecconi, M., Manoharan, V., Nikkhah, M., Hjortnaes, J., Cristino, A. L., Barabaschi, G., Demarchi, D., Dokmeci, M. R., Yang, Y., et al. (2014) · Lab Chip · doi:10.1039/c4lc00030g · Cited by 944
Self-citationChallenges in tissue engineering
Ikada, Y. (2006) · Journal of The Royal Society Interface · doi:10.1098/rsif.2006.0124 · Cited by 919
Silk matrix for tissue engineered anterior cruciate ligaments
Altman, G. H., Horan, R. L., Lu, H. H., Moreau, J., Martin, I., Richmond, J. C., & Kaplan, D. L. (2002) · Biomaterials · doi:10.1016/s0142-9612(02)00156-4 · Cited by 863
Microfluidic Bioprinting of Heterogeneous 3D Tissue Constructs Using Low‐Viscosity Bioink
Colosi, C., Shin, S. R., Manoharan, V., Massa, S., Costantini, M., Barbetta, A., Dokmeci, M. R., Dentini, M., & Khademhosseini, A. (2016) · Advanced Materials · doi:10.1002/adma.201503310 · Cited by 863
Metre-long cell-laden microfibres exhibit tissue morphologies and functions
Onoe, H., Okitsu, T., Itou, A., Kato-Negishi, M., Gojo, R., Kiriya, D., Sato, K., Miura, S., Iwanaga, S., Kuribayashi-Shigetomi, K., et al. (2013) · Nature Materials · doi:10.1038/nmat3606 · Cited by 860
Accordion-like honeycombs for tissue engineering of cardiac anisotropy
Engelmayr, G. C., Cheng, M., Bettinger, C. J., Borenstein, J. T., Langer, R., & Freed, L. E. (2008) · Nature Materials · doi:10.1038/nmat2316 · Cited by 848
3D printing of composite calcium phosphate and collagen scaffolds for bone regeneration
Inzana, J. A., Olvera, D., Fuller, S. M., Kelly, J. P., Graeve, O. A., Schwarz, E. M., Kates, S. L., & Awad, H. A. (2014) · Biomaterials · doi:10.1016/j.biomaterials.2014.01.064 · Cited by 840
Laser assisted bioprinting of engineered tissue with high cell density and microscale organization
Guillotin, B., Souquet, A., Catros, S., Duocastella, M., Pippenger, B., Bellance, S., Bareille, R., Rémy, M., Bordenave, L., Amédée, J., et al. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.05.055 · Cited by 832
Engineering vascularized tissue
Jain, R. K., Au, P., Tam, J., Duda, D. G., & Fukumura, D. (2005) · Nature Biotechnology · doi:10.1038/nbt0705-821 · Cited by 808
Blaeser, A., Duarte Campos, D. F., Puster, U., Richtering, W., Stevens, M. M., & Fischer, H. (2016) · Advanced Healthcare Materials · doi:10.1002/adhm.201500677 · Cited by 808
Metcalfe, A. D., & Ferguson, M. W. J. (2007) · Journal of The Royal Society Interface · doi:10.1098/rsif.2006.0179 · Cited by 785
Application of inkjet printing to tissue engineering
Boland, T., Xu, T., Damon, B., & Cui, X. (2006) · Biotechnology Journal · doi:10.1002/biot.200600081 · Cited by 783
Getting under the skin of epidermal morphogenesis
Fuchs, E., & Raghavan, S. (2002) · Nature Reviews Genetics · doi:10.1038/nrg758 · Cited by 753
Moutos, F. T., Freed, L. E., & Guilak, F. (2007) · Nature Materials · doi:10.1038/nmat1822 · Cited by 738
Biofabrication: reappraising the definition of an evolving field
Groll, J., Boland, T., Blunk, T., Burdick, J. A., Cho, D.-W., Dalton, P. D., Derby, B., Forgacs, G., Li, Q., Mironov, V. A., et al. (2016) · Biofabrication · doi:10.1088/1758-5090/8/1/013001 · Cited by 731
Design and Fabrication of Human Skin by Three-Dimensional Bioprinting
Lee, V., Singh, G., Trasatti, J. P., Bjornsson, C., Xu, X., Tran, T. N., Yoo, S.-S., Dai, G., & Karande, P. (2014) · Tissue Engineering Part C: Methods · doi:10.1089/ten.tec.2013.0335 · Cited by 725
Graphene-based materials for tissue engineering
Shin, S. R., Li, Y.-C., Jang, H. L., Khoshakhlagh, P., Akbari, M., Nasajpour, A., Zhang, Y. S., Tamayol, A., & Khademhosseini, A. (2016) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2016.03.007 · Cited by 721
Self-citationHuman microvasculature fabrication using thermal inkjet printing technology
Cui, X., & Boland, T. (2009) · Biomaterials · doi:10.1016/j.biomaterials.2009.07.056 · Cited by 704
Direct Human Cartilage Repair Using Three-Dimensional Bioprinting Technology
Cui, X., Breitenkamp, K., Finn, M. G., Lotz, M., & D'Lima, D. D. (2012) · Tissue Engineering Part A · doi:10.1089/ten.tea.2011.0543 · Cited by 686
Wang, Z., Abdulla, R., Parker, B., Samanipour, R., Ghosh, S., & Kim, K. (2015) · Biofabrication · doi:10.1088/1758-5090/7/4/045009 · Cited by 633
Xu, T., Binder, K. W., Albanna, M. Z., Dice, D., Zhao, W., Yoo, J. J., & Atala, A. (2012) · Biofabrication · doi:10.1088/1758-5082/5/1/015001 · Cited by 631
Michael, S., Sorg, H., Peck, C.-T., Koch, L., Deiwick, A., Chichkov, B., Vogt, P. M., & Reimers, K. (2013) · PLoS ONE · doi:10.1371/journal.pone.0057741 · Cited by 623
Skin tissue generation by laser cell printing
Koch, L., Deiwick, A., Schlie, S., Michael, S., Gruene, M., Coger, V., Zychlinski, D., Schambach, A., Reimers, K., Vogt, P. M., et al. (2012) · Biotechnology and Bioengineering · doi:10.1002/bit.24455 · Cited by 609
Wang, Y., Azaïs, T., Robin, M., Vallée, A., Catania, C., Legriel, P., Pehau-Arnaudet, G., Babonneau, F., Giraud-Guille, M.-M., & Nassif, N. (2012) · Nature Materials · doi:10.1038/nmat3362 · Cited by 605
Marcacci, M., Kon, E., Moukhachev, V., Lavroukov, A., Kutepov, S., Quarto, R., Mastrogiacomo, M., & Cancedda, R. (2007) · Tissue Engineering · doi:10.1089/ten.2006.0271 · Cited by 589
Bioresorbable Airway Splint Created with a Three-Dimensional Printer
Zopf, D. A., Hollister, S. J., Nelson, M. E., Ohye, R. G., & Green, G. E. (2013) · New England Journal of Medicine · doi:10.1056/nejmc1206319 · Cited by 589
Lee, W., Debasitis, J. C., Lee, V. K., Lee, J.-H., Fischer, K., Edminster, K., Park, J.-K., & Yoo, S.-S. (2009) · Biomaterials · doi:10.1016/j.biomaterials.2008.12.009 · Cited by 578
Biocompatible Inkjet Printing Technique for Designed Seeding of Individual Living Cells
Nakamura, M., Kobayashi, A., Takagi, F., Watanabe, A., Hiruma, Y., Ohuchi, K., Iwasaki, Y., Horie, M., Morita, I., & Takatani, S. (2005) · Tissue Engineering · doi:10.1089/ten.2005.11.1658 · Cited by 538
Cell and organ printing 1: Protein and cell printers
Wilson, W. C., & Boland, T. (2003) · The Anatomical Record Part A: Discoveries in Molecular, Cellular, and Evolutionary Biology · doi:10.1002/ar.a.10057 · Cited by 531
Viability and electrophysiology of neural cell structures generated by the inkjet printing method
Xu, T., Gregory, C. A., Molnar, P., Cui, X., Jalota, S., Bhaduri, S. B., & Boland, T. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2006.01.048 · Cited by 520
Reduced Graphene Oxide‐GelMA Hybrid Hydrogels as Scaffolds for Cardiac Tissue Engineering
Shin, S. R., Zihlmann, C., Akbari, M., Assawes, P., Cheung, L., Zhang, K., Manoharan, V., Zhang, Y. S., Yüksekkaya, M., Wan, K., et al. (2016) · Small · doi:10.1002/smll.201600178 · Cited by 497
Self-citationDelivery of human fibroblast cells by piezoelectric drop-on-demand inkjet printing
Saunders, R. E., Gough, J. E., & Derby, B. (2008) · Biomaterials · doi:10.1016/j.biomaterials.2007.09.032 · Cited by 495
Cooper, J. A., Lu, H. H., Ko, F. K., Freeman, J. W., & Laurencin, C. T. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2004.05.014 · Cited by 481
Laser Printing of Skin Cells and Human Stem Cells
Koch, L., Kuhn, S., Sorg, H., Gruene, M., Schlie, S., Gaebel, R., Polchow, B., Reimers, K., Stoelting, S., Ma, N., et al. (2010) · Tissue Engineering Part C: Methods · doi:10.1089/ten.tec.2009.0397 · Cited by 476
High-throughput laser printing of cells and biomaterials for tissue engineering
Guillemot, F., Souquet, A., Catros, S., Guillotin, B., Lopez, J., Faucon, M., Pippenger, B., Bareille, R., Rémy, M., Bellance, S., et al. (2010) · Acta Biomaterialia · doi:10.1016/j.actbio.2009.09.029 · Cited by 475
Fiber-based tissue engineering: progress, challenges, and opportunities
Tamayol, A., Akbari, M., Annabi, N., Paul, A., Khademhosseini, A., & Juncker, D. (2013) · Biotechnology Advances · doi:10.1016/j.biotechadv.2012.11.007 · Cited by 458
Self-citationCox, S. C., Thornby, J. A., Gibbons, G. J., Williams, M. A., & Mallick, K. K. (2015) · Materials Science and Engineering: C · doi:10.1016/j.msec.2014.11.024 · Cited by 452
Functional muscle regeneration with combined delivery of angiogenesis and myogenesis factors
Borselli, C., Storrie, H., Benesch-Lee, F., Shvartsman, D., Cezar, C., Lichtman, J. W., Vandenburgh, H. H., & Mooney, D. J. (2010) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.0903875106 · Cited by 447
Wang, Y., Kim, U.-J., Blasioli, D. J., Kim, H.-J., & Kaplan, D. L. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2005.05.022 · Cited by 436
Qazi, T. H., Mooney, D. J., Pumberger, M., Geißler, S., & Duda, G. N. (2015) · Biomaterials · doi:10.1016/j.biomaterials.2015.02.110 · Cited by 433
Bioprinting for stem cell research
Tasoglu, S., & Demirci, U. (2013) · Trends in Biotechnology · doi:10.1016/j.tibtech.2012.10.005 · Cited by 422
Hsieh, F.-Y., Lin, H.-H., & Hsu, S.-H. (2015) · Biomaterials · doi:10.1016/j.biomaterials.2015.08.028 · Cited by 420
30,000-Year-Old Wild Flax Fibers
Kvavadze, E., Bar-Yosef, O., Belfer-Cohen, A., Boaretto, E., Jakeli, N., Matskevich, Z., & Meshveliani, T. (2009) · Science · doi:10.1126/science.1175404 · Cited by 415
Rapid Prototyping: Principles and Applications (with Companion CD-ROM)
Chua, C. K., Leong, K. F., & Lim, C. S. (2003) · WORLD SCIENTIFIC eBooks · doi:10.1142/5064 · Cited by 413
Approaches to neural tissue engineering using scaffolds for drug delivery
Willerth, S. M., & Sakiyama-Elbert, S. E. (2007) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2007.03.014 · Cited by 392
Self-citationA biodegradable porous composite scaffold of PGA/β-TCP for bone tissue engineering
Cao, H., & Kuboyama, N. (2010) · Bone · doi:10.1016/j.bone.2009.09.031 · Cited by 391
Navaei, A., Saini, H., Christenson, W., Sullivan, R. T., Ros, R., & Nikkhah, M. (2016) · Acta Biomaterialia · doi:10.1016/j.actbio.2016.05.027 · Cited by 386
Self-citationCardiac tissue engineering using tissue printing technology and human cardiac progenitor cells
Gaetani, R., Doevendans, P. A., Metz, C. H. G., Alblas, J., Messina, E., Giacomello, A., & Sluijter, J. P. G. (2012) · Biomaterials · doi:10.1016/j.biomaterials.2011.11.003 · Cited by 383
Wang, L., Wu, Y., Guo, B., & Ma, P. X. (2015) · ACS Nano · doi:10.1021/acsnano.5b03644 · Cited by 381
The lightweight and large porous mesh concept for hernia repair
Klosterhalfen, B., Junge, K., & Klinge, U. (2005) · Expert Review of Medical Devices · doi:10.1586/17434440.2.1.103 · Cited by 380
A 3D bioprinted complex structure for engineering the muscle–tendon unit
Merceron, T. K., Burt, M., Seol, Y.-J., Kang, H.-W., Lee, S. J., Yoo, J. J., & Atala, A. (2015) · Biofabrication · doi:10.1088/1758-5090/7/3/035003 · Cited by 373
Stem and progenitor cells: the premature desertion of rigorous definitions
Seaberg, R. M., & van der Kooy, D. (2003) · Trends in Neurosciences · doi:10.1016/s0166-2236(03)00031-6 · Cited by 371
Fabrication of soft tissue engineering scaffolds by means of rapid prototyping techniques
Landers, R., Pfister, A., Hübner, U., John, H., Schmelzeisen, R., & Mülhaupt, R. (2002) · Journal of Materials Science · doi:10.1023/a:1016189724389 · Cited by 367
Tarafder, S., Balla, V. K., Davies, N. M., Bandyopadhyay, A., & Bose, S. (2013) · Journal of Tissue Engineering and Regenerative Medicine · doi:10.1002/term.555 · Cited by 364
Arcaute, K., Mann, B. K., & Wicker, R. B. (2006) · Annals of Biomedical Engineering · doi:10.1007/s10439-006-9156-y · Cited by 364
Biofabrication: a 21st century manufacturing paradigm
Mironov, V, Trusk, T., Kasyanov, V, Little, S., Swaja, R., & Markwald, R. (2009) · Biofabrication · doi:10.1088/1758-5082/1/2/022001 · Cited by 362
Bioprinting for cancer research
Knowlton, S., Onal, S., Yu, C. H., Zhao, J. J., & Tasoglu, S. (2015) · Trends in Biotechnology · doi:10.1016/j.tibtech.2015.06.007 · Cited by 361
Phillippi, J. A., Miller, E., Weiss, L., Huard, J., Waggoner, A., & Campbell, P. (2008) · Stem Cells · doi:10.1634/stemcells.2007-0520 · Cited by 361
Yeong, W. Y., Sudarmadji, N., Yu, H. Y., Chua, C. K., Leong, K. F., Venkatraman, S. S., Boey, Y. C. F., & Tan, L. P. (2010) · Acta Biomaterialia · doi:10.1016/j.actbio.2009.12.033 · Cited by 355
Patterning human stem cells and endothelial cells with laser printing for cardiac regeneration
Gaebel, R., Ma, N., Liu, J., Guan, J., Koch, L., Klopsch, C., Gruene, M., Toelk, A., Wang, W., Mark, P., et al. (2011) · Biomaterials · doi:10.1016/j.biomaterials.2011.08.071 · Cited by 351
Tissue Engineering of Ligaments
Vunjak-Novakovic, G., Altman, G., Horan, R., & Kaplan, D. L. (2004) · Annual Review of Biomedical Engineering · doi:10.1146/annurev.bioeng.6.040803.140037 · Cited by 346
Bioprinting: inkjet printing proteins and hybrid cell-containing materials and structures
Derby, B. (2008) · Journal of Materials Chemistry · doi:10.1039/b807560c · Cited by 339
Xu, F., Celli, J., Rizvi, I., Moon, S., Hasan, T., & Demirci, U. (2011) · Biotechnology Journal · doi:10.1002/biot.201000340 · Cited by 337
Axon Growth and Guidance: Receptor Regulation and Signal Transduction
O'Donnell, M., Chance, R. K., & Bashaw, G. J. (2009) · Annual Review of Neuroscience · doi:10.1146/annurev.neuro.051508.135614 · Cited by 334
Survival and Proliferative Ability of Various Living Cell Types after Laser-Induced Forward Transfer
Hopp, B., Smausz, T., Kresz, N., Barna, N., Bor, Z., Kolozsvári, L., Chrisey, D. B., Szabó, A., & Nógrádi, A. (2005) · Tissue Engineering · doi:10.1089/ten.2005.11.1817 · Cited by 333
Polylysine-functionalised thermoresponsive chitosan hydrogel for neural tissue engineering
Crompton, K. E., Goud, J. D., Bellamkonda, R. V., Gengenbach, T. R., Finkelstein, D. I., Horne, M. K., & Forsythe, J. S. (2007) · Biomaterials · doi:10.1016/j.biomaterials.2006.08.044 · Cited by 332
Polymeric hydrogels for burn wound care: Advanced skin wound dressings and regenerative templates
Madaghiele, M., Sannino, A., Ambrosio, L., & Demitri, C. (2014) · Burns & Trauma · doi:10.4103/2321-3868.143616 · Cited by 331
Sahoo, S., Toh, S. L., & Goh, J. C. H. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.01.004 · Cited by 329
Swistowski, A., Peng, J., Liu, Q., Mali, P., Rao, M. S., Cheng, L., & Zeng, X. (2010) · Stem Cells · doi:10.1002/stem.499 · Cited by 317
Kharaziha, M., Nikkhah, M., Shin, S.-R., Annabi, N., Masoumi, N., Gaharwar, A. K., Camci-Unal, G., & Khademhosseini, A. (2013) · Biomaterials · doi:10.1016/j.biomaterials.2013.04.045 · Cited by 313
Self-citationKLEBE, R. (1988) · Experimental Cell Research · doi:10.1016/0014-4827(88)90275-3 · Cited by 310
Ligament tissue engineering: An evolutionary materials science approach
Laurencin, C. T., & Freeman, J. W. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2005.05.073 · Cited by 304
Skeletal muscle tissue engineering: methods to form skeletal myotubes and their applications
Ostrovidov, S., Hosseini, V., Ahadian, S., Fujie, T., Parthiban, S. P., Ramalingam, M., Bae, H., Kaji, H., & Khademhosseini, A. (2014) · Tissue Engineering Part B: Reviews · doi:10.1089/ten.teb.2013.0534 · Cited by 302
Some recent advances in the fabrication and design of three-dimensional textile preforms: a review
Kamiya, R., Cheeseman, B. A., Popper, P., & Chou, T.-W. (2000) · Composites Science and Technology · doi:10.1016/s0266-3538(99)00093-7 · Cited by 300
Tough and flexible CNT–polymeric hybrid scaffolds for engineering cardiac constructs
Kharaziha, M., Shin, S. R., Nikkhah, M., Topkaya, S. N., Masoumi, N., Annabi, N., Dokmeci, M. R., & Khademhosseini, A. (2014) · Biomaterials · doi:10.1016/j.biomaterials.2014.05.014 · Cited by 297
Self-citationLaser-guided direct writing of living cells
Odde, D. J., & Renn, M. J. (2000) · Biotechnology and Bioengineering · doi:10.1002/(sici)1097-0290(20000205)67:3<312::aid-bit7>3.0.co;2-f · Cited by 297
3D printed anatomical nerve regeneration pathways
Johnson, B. N., Lancaster, K. Z., Zhen, G., He, J., Gupta, M. K., Kong, Y. L., Engel, E. A., Krick, K. D., Ju, A., Meng, F., et al. (2015) · Advanced Functional Materials · doi:10.1002/adfm.201501760 · Cited by 293
Laser Printing of Stem Cells for Biofabrication of Scaffold-Free Autologous Grafts
Gruene, M., Deiwick, A., Koch, L., Schlie, S., Unger, C., Hofmann, N., Bernemann, I., Glasmacher, B., & Chichkov, B. (2011) · Tissue Engineering Part C: Methods · doi:10.1089/ten.tec.2010.0359 · Cited by 286
Laser-guided direct writing for applications in biotechnology
Odde, D. J., & Renn, M. J. (1999) · Trends in Biotechnology · doi:10.1016/s0167-7799(99)01355-4 · Cited by 278
Liao, I., Moutos, F. T., Estes, B. T., Zhao, X., & Guilak, F. (2013) · Advanced Functional Materials · doi:10.1002/adfm.201300483 · Cited by 276
Guillemot, F., Souquet, A., Catros, S., & Guillotin, B. (2010) · Nanomedicine · doi:10.2217/nnm.10.14 · Cited by 268
Directed endothelial cell morphogenesis in micropatterned gelatin methacrylate hydrogels
Nikkhah, M., Eshak, N., Zorlutuna, P., Annabi, N., Castello, M., Kim, K., Dolatshahi-Pirouz, A., Edalat, F., Bae, H., Yang, Y., et al. (2012) · Biomaterials · doi:10.1016/j.biomaterials.2012.08.068 · Cited by 261
Self-citationKennedy, J. E. (2007) · The Journal of Rehabilitation Research and Development · doi:10.1682/jrrd.2006.12.0166 · Cited by 261
Eschenhagen, T., & Zimmermann, W. H. (2005) · Circulation Research · doi:10.1161/01.res.0000196562.73231.7d · Cited by 261
Jet‐based methods to print living cells
Ringeisen, B. R., Othon, C. M., Barron, J. A., Young, D., & Spargo, B. J. (2006) · Biotechnology Journal · doi:10.1002/biot.200600058 · Cited by 249
Alginate/graphene oxide fibers with enhanced mechanical strength prepared by wet spinning
He, Y., Zhang, N., Gong, Q., Qiu, H., Wang, W., Liu, Y., & Gao, J. (2012) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2012.01.071 · Cited by 249
Science in three dimensions: The print revolution
Jones, N. (2012) · Nature · doi:10.1038/487022a · Cited by 249
The influence of structural design of PLGA/collagen hybrid scaffolds in cartilage tissue engineering
Dai, W., Kawazoe, N., Lin, X., Dong, J., & Chen, G. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2009.11.070 · Cited by 248
Biofabrication of a three-dimensional liver micro-organ as an in vitro drug metabolism model
Chang, R., Emami, K., Wu, H., & Sun, W. (2010) · Biofabrication · doi:10.1088/1758-5082/2/4/045004 · Cited by 247
Catros, S., Fricain, J.-C., Guillotin, B., Pippenger, B., Bareille, R., Remy, M., Lebraud, E., Desbat, B., Amédée, J., & Guillemot, F. (2011) · Biofabrication · doi:10.1088/1758-5082/3/2/025001 · Cited by 245
Application of laser printing to mammalian cells
Barron, J. A., Ringeisen, B. R., Kim, H., Spargo, B. J., & Chrisey, D. B. (2004) · Thin Solid Films · doi:10.1016/j.tsf.2003.11.161 · Cited by 242
Engineered Contractile Skeletal Muscle Tissue on a Microgrooved Methacrylated Gelatin Substrate
Hosseini, V., Ahadian, S., Ostrovidov, S., Camci-Unal, G., Chen, S., Kaji, H., Ramalingam, M., & Khademhosseini, A. (2012) · Tissue Engineering Part A · doi:10.1089/ten.tea.2012.0181 · Cited by 242
Engineering thick tissues - the vascularisation problem
Graduate School of Biomedical Engineering, U. O. N. S. W., Ko, H., Milthorpe, B., & McFarland, C. (2007) · European Cells and Materials · doi:10.22203/ecm.v014a01 · Cited by 238
A Bioactive Carbon Nanotube‐Based Ink for Printing 2D and 3D Flexible Electronics
Shin, S. R., Farzad, R., Tamayol, A., Manoharan, V., Mostafalu, P., Zhang, Y. S., Akbari, M., Jung, S. M., Kim, D., Comotto, M., et al. (2016) · Advanced Materials · doi:10.1002/adma.201506420 · Cited by 236
Self-citationThe mechanical properties of composites reinforced with woven and braided fabrics
Huang, Z. M. (2000) · Composites Science and Technology · doi:10.1016/s0266-3538(99)00148-7 · Cited by 232
Xu, N., Ye, X., Wei, D., Zhong, J., Chen, Y., Xu, G., & He, D. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am502716t · Cited by 231
Foroughi, J., Spinks, G. M., Aziz, S., Mirabedini, A., Jeiranikhameneh, A., Wallace, G. G., Kozlov, M. E., & Baughman, R. H. (2016) · ACS Nano · doi:10.1021/acsnano.6b04125 · Cited by 229
Tissue engineering of the anterior cruciate ligament using a braid–twist scaffold design
Freeman, J. W., Woods, M. D., & Laurencin, C. T. (2007) · Journal of Biomechanics · doi:10.1016/j.jbiomech.2006.09.025 · Cited by 227
Tissue engineering of human bladder
Atala, A. (2011) · British Medical Bulletin · doi:10.1093/bmb/ldr003 · Cited by 219
Mostafalu, P., Akbari, M., Alberti, K. A., Xu, Q., Khademhosseini, A., & Sonkusale, S. R. (2016) · Microsystems & Nanoengineering · doi:10.1038/micronano.2016.39 · Cited by 219
Self-citationAlginate fibres modified with unhydrolysed and hydrolysed chitosans for wound dressings
Knill, C. J., Kennedy, J. F., Mistry, J., Miraftab, M., Smart, G., Groocock, M. R., & Williams, H. J. (2004) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2003.08.004 · Cited by 218
DNA deposition through laser induced forward transfer
Colina, M., Serra, P., Fernández-Pradas, J. M., Sevilla, L., & Morenza, J. L. (2005) · Biosensors and Bioelectronics · doi:10.1016/j.bios.2004.08.047 · Cited by 217
Textile Technologies and Tissue Engineering: A Path Toward Organ Weaving
Akbari, M., Tamayol, A., Bagherifard, S., Serex, L., Mostafalu, P., Faramarzi, N., Mohammadi, M. H., & Khademhosseini, A. (2016) · Advanced Healthcare Materials · doi:10.1002/adhm.201500517 · Cited by 215
Self-citationAn injectable shear-thinning biomaterial for endovascular embolization
Avery, R. K., Albadawi, H., Akbari, M., Zhang, Y. S., Duggan, M. J., Sahani, D. V., Olsen, B. D., Khademhosseini, A., & Oklu, R. (2016) · Science Translational Medicine · doi:10.1126/scitranslmed.aah5533 · Cited by 215
Self-citationFabrication and characterization of bio-engineered cardiac pseudo tissues
Xu, T., Baicu, C., Aho, M., Zile, M., & Boland, T. (2009) · Biofabrication · doi:10.1088/1758-5082/1/3/035001 · Cited by 211
Snyder, J. E., Hamid, Q., Wang, C., Chang, R., Emami, K., Wu, H., & Sun, W. (2011) · Biofabrication · doi:10.1088/1758-5082/3/3/034112 · Cited by 210
Direct laser writing of 3D scaffolds for neural tissue engineering applications
Melissinaki, V, Gill, A. A., Ortega, I., Vamvakaki, M., Ranella, A., Haycock, J. W., Fotakis, C., Farsari, M., & Claeyssens, F. (2011) · Biofabrication · doi:10.1088/1758-5082/3/4/045005 · Cited by 209
Digital microfabrication of user‐defined 3D microstructures in cell‐laden hydrogels
Soman, P., Chung, P. H., Zhang, A. P., & Chen, S. (2013) · Biotechnology and Bioengineering · doi:10.1002/bit.24957 · Cited by 207
Stereolithography of spatially controlled multi-material bioactive poly(ethylene glycol) scaffolds
Arcaute, K., Mann, B., & Wicker, R. (2010) · Acta Biomaterialia · doi:10.1016/j.actbio.2009.08.017 · Cited by 205
Maintenance of highly contractile tissue-cultured avian skeletal myotubes in collagen gel
Vandenburgh, H. H., Karlisch, P., & Farr, L. (1988) · In Vitro Cellular & Developmental Biology · doi:10.1007/bf02623542 · Cited by 205
Direct Cell Writing of 3D Microorgan for In Vitro Pharmacokinetic Model
Chang, R., Nam, J., & Sun, W. (2008) · Tissue Engineering Part C: Methods · doi:10.1089/ten.tec.2007.0392 · Cited by 203
Braided Nanofibrous Scaffold for Tendon and Ligament Tissue Engineering
Barber, J. G., Handorf, A. M., Allee, T. J., & Li, W.-J. (2013) · Tissue Engineering Part A · doi:10.1089/ten.tea.2010.0538 · Cited by 202
A Review of 3D Printing Techniques and the Future in Biofabrication of Bioprinted Tissue
Patra, S., & Young, V. (2016) · Cell Biochemistry and Biophysics · doi:10.1007/s12013-016-0730-0 · Cited by 202
Culturing of skin fibroblasts in a thin PLGA–collagen hybrid mesh
Chen, G., Sato, T., Ohgushi, H., Ushida, T., Tateishi, T., & Tanaka, J. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2004.07.034 · Cited by 199
Huang, S., Yao, B., Xie, J., & Fu, X. (2016) · Acta Biomaterialia · doi:10.1016/j.actbio.2015.12.039 · Cited by 187
Ahadian, S., Yamada, S., Ramón-Azcón, J., Estili, M., Liang, X., Nakajima, K., Shiku, H., Khademhosseini, A., & Matsue, T. (2016) · Acta Biomaterialia · doi:10.1016/j.actbio.2015.11.047 · Cited by 180
Porous ceramic bone scaffolds for vascularized bone tissue regeneration
Will, J., Melcher, R., Treul, C., Travitzky, N., Kneser, U., Polykandriotis, E., Horch, R., & Greil, P. (2008) · Journal of Materials Science: Materials in Medicine · doi:10.1007/s10856-007-3346-5 · Cited by 179
Tenogenic Induction of Human MSCs by Anisotropically Aligned Collagen Biotextiles
Younesi, M., Islam, A., Kishore, V., Anderson, J. M., & Akkus, O. (2014) · Advanced Functional Materials · doi:10.1002/adfm.201400828 · Cited by 179
Chen, G., Sato, T., Ushida, T., Hirochika, R., Shirasaki, Y., Ochiai, N., & Tateishi, T. (2003) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.10164 · Cited by 176
Composite living fibers for creating tissue constructs using textile techniques
Akbari, M., Tamayol, A., Laforte, V., Annabi, N., Najafabadi, A. H., Khademhosseini, A., & Juncker, D. (2014) · Advanced Functional Materials · doi:10.1002/adfm.201303655 · Cited by 167
Self-citationEngineered spatial patterns of FGF-2 immobilized on fibrin direct cell organization
Campbell, P. G., Miller, E. D., Fisher, G. W., Walker, L. M., & Weiss, L. E. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2005.04.032 · Cited by 165
3D‐Printed Biodegradable Polymeric Vascular Grafts
Melchiorri, A. J., Hibino, N., Best, C. A., Yi, T., Lee, Y. U., Kraynak, C. A., Kimerer, L. K., Krieger, A., Kim, P., Breuer, C. K., et al. (2016) · Advanced Healthcare Materials · doi:10.1002/adhm.201500725 · Cited by 165
Cheng, Y., Yu, Y., Fu, F., Wang, J., Shang, L., Gu, Z., & Zhao, Y. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b11445 · Cited by 158
Restoration of Skeletal Muscle Defects with Adult Human Cells Delivered on Fibrin Microthreads
Page, R. L., Malcuit, C. M., Vilner, L., Vojtic, I., Shaw, S. E., Hedblom, E., Hu, J. Z., Pins, G. D., Rolle, M. W., & Dominko, T. (2011) · Tissue Engineering Part A · doi:10.1089/ten.tea.2011.0024 · Cited by 156
Synthesis and characterization of a biodegradable elastomer featuring a dual crosslinking mechanism
Tran, R. T., Thevenot, P., Gyawali, D., Chiao, J. ‐., Tang, L., & Yang, J. Y. (2010) · Soft Matter · doi:10.1039/c001605e · Cited by 155
Standardized 3D Bioprinting of Soft Tissue Models with Human Primary Cells
Rimann, M., Bono, E., Annaheim, H., Bleisch, M., & Graf‐Hausner, U. (2015) · SLAS TECHNOLOGY · doi:10.1177/2211068214567146 · Cited by 154
Dermal Patch with Integrated Flexible Heater for on Demand Drug Delivery
Bagherifard, S., Tamayol, A., Mostafalu, P., Akbari, M., Comotto, M., Annabi, N., Ghaderi, M., Sonkusale, S., Dokmeci, M. R., & Khademhosseini, A. (2015) · Advanced Healthcare Materials · doi:10.1002/adhm.201500357 · Cited by 153
Self-citationBiomaterials and scaffolds for ligament tissue engineering
Ge, Z., Yang, F., Goh, J., Ramakrishna, S., & Lee, E. H. (2006) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.30578 · Cited by 151
Directed Three-Dimensional Patterning of Self-Assembled Peptide Fibrils
Dinca, V. C., Kasotakis, E., Catherine, J., Mourka, A., Ranella, A., Ovsianikov, A., Chichkov, B. N., Farsari, M., Mitraki, A., & Fotakis, C. (2007) · Nano Letters · doi:10.1021/nl072798r · Cited by 148
Luo, Y., Lode, A., & Gelinsky, M. (2012) · Advanced Healthcare Materials · doi:10.1002/adhm.201200303 · Cited by 147
Saijo, H., Igawa, K., Kanno, Y., Mori, Y., Kondo, K., Shimizu, K., Suzuki, S., Chikazu, D., Iino, M., Anzai, M., et al. (2009) · Journal of Artificial Organs · doi:10.1007/s10047-009-0462-7 · Cited by 147
Apparent Decline of the Golden Toad: Underground or Extinct?
Crump, M. L., Hensley, F. R., & Clark, K. L. (1992) · Copeia · doi:10.2307/1446201 · Cited by 144
Dolatshahi‐Pirouz, A., Nikkhah, M., Gaharwar, A. K., Hashmi, B., Guermani, E., Aliabadi, H., Camci‐Unal, G., Ferrante, T. C., Foss, M., Ingber, D. E., et al. (2014) · Scientific Reports · doi:10.1038/srep03896 · Cited by 143
Self-citationHigh-Throughput Production of Single-Cell Microparticles Using an Inkjet Printing Technology
Xu, T., Kincaid, H. A., Atala, A., & Yoo, J. J. (2008) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.2903064 · Cited by 140
PNIPAAm-based biohybrid injectable hydrogel for cardiac tissue engineering
Navaei, A., Truong, D. D., Heffernan, J. M., Cutts, J., Brafman, D. A., Sirianni, R. W., Vernon, B. L., & Nikkhah, M. (2015) · Acta Biomaterialia · doi:10.1016/j.actbio.2015.12.019 · Cited by 135
Self-citationMatsuda, T., Mizutani, M., & Arnold, S. C. (2000) · Macromolecules · doi:10.1021/ma991404i · Cited by 134
Moutos, F. T., & Guilak, F. (2009) · Tissue Engineering Part A · doi:10.1089/ten.tea.2009.0480 · Cited by 132
Boublik, J., Park, H., Radisic, M., Tognana, E., Chen, F., Pei, M., Vunjak‐Novakovic, G., & Freed, L. E. (2005) · Tissue Engineering · doi:10.1089/ten.2005.11.1122 · Cited by 129
In situ bioprinting of the skin for burns
Binder, K. W., Zhao, W., Aboushwareb, T. A., Dice, D. D., Atala, A., & Yoo, J. J. (2010) · Journal of the American College of Surgeons · doi:10.1016/j.jamcollsurg.2010.06.198 · Cited by 124
Stem cells for skeletal muscle repair
Shadrach, J. L., & Wagers, A. J. (2011) · Philosophical Transactions of the Royal Society B Biological Sciences · doi:10.1098/rstb.2011.0027 · Cited by 123
Vaquette, C., Kahn, C. J. F., Frochot, C., Nouvel, C., Six, J., de Isla, N., Luo, L., Cooper-White, J. J., Rahouadj, R., & Wang, X. (2010) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.32801 · Cited by 118
Multifunctional Hybrid Three‐dimensionally Woven Scaffolds for Cartilage Tissue Engineering
Moutos, F. T., Estes, B. T., & Guilak, F. (2010) · Macromolecular Bioscience · doi:10.1002/mabi.201000124 · Cited by 113
Inkjet printing Schwann cells and neuronal analogue NG108-15 cells
Tse, C., Whiteley, R., Yu, T., Stringer, J., MacNeil, S., Haycock, J. W., & Smith, P. J. (2016) · Biofabrication · doi:10.1088/1758-5090/8/1/015017 · Cited by 110
3D Cardiac Microtissues Encapsulated with the Co‐Culture of Cardiomyocytes and Cardiac Fibroblasts
Saini, H., Navaei, A., Putten, A. V., & Nikkhah, M. (2015) · Advanced Healthcare Materials · doi:10.1002/adhm.201500331 · Cited by 108
Self-citationSimple Spinning of Heterogeneous Hollow Microfibers on Chip
Yu, Y., Wei, W., Wang, Y., Xu, C., Guo, Y., & Qin, J. (2016) · Advanced Materials · doi:10.1002/adma.201601504 · Cited by 107
Wang, A., Ao, Q., Cao, W., Yu, M., He, Q., Kong, L., Zhang, L., Gong, Y., & Zhang, X. (2006) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.30683 · Cited by 106
Ikeda, M., Uemura, T., Takamatsu, K., Okada, M., Kazuki, K., Tabata, Y., Ikada, Y., & Nakamura, H. (2013) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.34816 · Cited by 105
Three‐dimensional architecture of the left ventricular myocardium
Lunkenheimer, P. P., Redmann, K., Kling, N., Jiang, X., Rothaus, K., Cryer, C. W., Wübbeling, F., Niederer, P. F., Heitz, P. U., Ho, S. Y., et al. (2006) · The Anatomical Record Part A Discoveries in Molecular Cellular and Evolutionary Biology · doi:10.1002/ar.a.20326 · Cited by 102
3D bioprinting: A new insight into the therapeutic strategy of neural tissue regeneration
Hsieh, F.-Y., & Hsu, S. (2015) · Organogenesis · doi:10.1080/15476278.2015.1123360 · Cited by 102
Textile-templated electrospun anisotropic scaffolds for regenerative cardiac tissue engineering
Ayaz, H., Perets, A., Ayaz, H., Gilroy, K. D., Govindaraj, M., Brookstein, D. S., & Lelkes, P. I. (2014) · Biomaterials · doi:10.1016/j.biomaterials.2014.06.029 · Cited by 101
Synthetic niche to modulate regenerative potential of MSCs and enhance skeletal muscle regeneration
Pumberger, M., Qazi, T. H., Ehrentraut, M. C., Textor, M., Kueper, J., Stoltenburg, G., Winkler, T., von Roth, P., Reinke, S., Borselli, C., et al. (2016) · Biomaterials · doi:10.1016/j.biomaterials.2016.05.009 · Cited by 98
Yeh, P., Wang, B., Oakes, T. R., French, L. M., Pan, H., Graner, J. L., Liu, W., & Riedy, G. P. (2013) · Human Brain Mapping · doi:10.1002/hbm.22358 · Cited by 97
Acellular Hydrogels for Regenerative Burn Wound Healing: Translation from a Porcine Model
Shen, Y., Song, H. G., Papa, A. E., Burke, J. A., Volk, S. W., & Gerecht, S. (2015) · Journal of Investigative Dermatology · doi:10.1038/jid.2015.182 · Cited by 94
Fischer, B. L., Parsons, M. W., Durgerian, S., Reece, C., Mourany, L., Lowe, M. J., Beall, E. B., Koenig, K. A., Jones, S. E., Newsome, M. R., et al. (2013) · Journal of Neurotrauma · doi:10.1089/neu.2013.2877 · Cited by 92
Almeida, L. R., Martins, A. R., Fernandes, E. M., Oliveira, M. B., Correlo, V. M., Pashkuleva, I., Marques, A. P., Ribeiro, A. S., Durães, N. F., Silva, C., et al. (2013) · Acta Biomaterialia · doi:10.1016/j.actbio.2013.05.019 · Cited by 88
Engineering Functional Epithelium for Regenerative Medicine and In Vitro Organ Models: A Review
Vrana, N. E., Lavall�e, P., Dokmeci, M. R., Dehghani, F., Ghaemmaghami, A. M., & Khademhosseini, A. (2013) · Tissue Engineering Part B Reviews · doi:10.1089/ten.teb.2012.0603 · Cited by 81
Kabadi, S. V., Stoica, B. A., Loane, D. J., Luo, T., & Faden, A. I. (2014) · Journal of Cerebral Blood Flow & Metabolism · doi:10.1038/jcbfm.2013.228 · Cited by 78
A multilayer braided scaffold for Anterior Cruciate Ligament: Mechanical modeling at the fiber scale
Laurent, C. P., Durville, D., Mainard, D., Ganghoffer, J., & Rahouadj, R. (2012) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2012.03.005 · Cited by 78
Fabrication of three-dimensional scaffolds for heterogeneous tissue engineering
Han, L., Suri, S., Schmidt, C. E., & Chen, S. (2010) · Biomedical Microdevices · doi:10.1007/s10544-010-9425-2 · Cited by 77
Skin Diseases Modeling using Combined Tissue Engineering and Microfluidic Technologies
Mohammadi, M. H., Araghi, B. H., Beydaghi, V., Geraili, A., Moradi, F., Jafari, P., Janmaleki, M., Valente, K. P., Akbari, M., & Sanati‐Nezhad, A. (2016) · Advanced Healthcare Materials · doi:10.1002/adhm.201600439 · Cited by 76
Self-citationGhorbanian, S., Qasaimeh, M. A., Akbari, M., Tamayol, A., & Juncker, D. (2014) · Biomedical Microdevices · doi:10.1007/s10544-014-9842-8 · Cited by 73
Self-citationCT-generated porous hydroxyapatite orbital floor prosthesis as a prototype bioimplant.
Levy, R. A., Chu, T. G., Halloran, J. W., Feinberg, S. E., & Hollister, S. J. (1997) · PubMed Central · Cited by 72
Skeletal Muscle Tissue Engineering: Which Cell to Use?
Fishman, J. M., Tyraskis, A., Maghsoudlou, P., Urbani, L., Totonelli, G., Birchall, M., & Coppi, P. D. (2013) · Tissue Engineering Part B Reviews · doi:10.1089/ten.teb.2013.0120 · Cited by 71
Kim, M. H., Hong, H. N., Hong, J. P., et al. (2009) · Biomaterials · doi:10.1016/j.biomaterials.2009.10.057 · Cited by 69
From fibroblast cells to cardiomyocytes: direct lineage reprogramming
Yang, L. (2011) · Stem Cell Research & Therapy · doi:10.1186/scrt42 · Cited by 68
Bongio, M., Lopa, S., Gilardi, M., Bersini, S., & Moretti, M. (2016) · Nanomedicine · doi:10.2217/nnm-2015-0021 · Cited by 64
Neural tissue engineering using embryonic and induced pluripotent stem cells
Willerth, S. M. (2011) · Stem Cell Research & Therapy · doi:10.1186/scrt58 · Cited by 63
Self-citationLu, M.-C., Huang, Y.-T., Lin, J., Yao, C., Lou, C., Tsai, C., & Chen, Y.-S. (2008) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-008-3646-4 · Cited by 60
Neural correlates of apathy revealed by lesion mapping in participants with traumatic brain injuries
Knutson, K. M., Monte, O. D., Raymont, V., Wassermann, E. M., Krüeger, F., & Grafman, J. H. (2013) · Human Brain Mapping · doi:10.1002/hbm.22225 · Cited by 57
Cited by
3D bioprinting of tissues and organs for regenerative medicine
Vijayavenkataraman, S., Yan, W.-C., Lu, W. F., Wang, C.-H., & Fuh, J. Y. H. (2018) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2018.07.004 · Cited by 630
Recent Advances in Biomaterials for 3D Printing and Tissue Engineering
Jammalamadaka, U., & Tappa, K. (2018) · Journal of Functional Biomaterials · doi:10.3390/jfb9010022 · Cited by 526
Mondschein, R. J., Kanitkar, A., Williams, C. B., Verbridge, S. S., & Long, T. E. (2017) · Biomaterials · doi:10.1016/j.biomaterials.2017.06.005 · Cited by 475
An Advanced Multifunctional Hydrogel‐Based Dressing for Wound Monitoring and Drug Delivery
Mirani, B., Pagan, E., Currie, B., Siddiqui, M. A., Hosseinzadeh, R., Mostafalu, P., Zhang, Y. S., Ghahary, A., & Akbari, M. (2017) · Advanced Healthcare Materials · doi:10.1002/adhm.201700718 · Cited by 387
Self-citationAqueous Two‐Phase Emulsion Bioink‐Enabled 3D Bioprinting of Porous Hydrogels
Ying, G., Jiang, N., Maharjan, S., Yin, Y., Chai, R., Cao, X., Yang, J., Miri, A. K., Hassan, S., & Zhang, Y. S. (2018) · Advanced Materials · doi:10.1002/adma.201805460 · Cited by 377
Metadata
- Authors
- Pedde, R. D., Mirani, B., Navaei, A., Styan, T., Wong, S., Mehrali, M., Thakur, A., Mohtaram, N. K., Bayati, A., Dolatshahi‐Pirouz, A., Nikkhah, M., Willerth, S. M., & Akbari, M.
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2017-04-03
- Volume
- 29
- Issue
- 19
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W2605174594
- Cited by
- 388
- References
- 211
- FWCI
- 17.92
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.