The DOI matches its Crossref record; 212 of the 212 references it cites were found in a registry or an index.
Recent Progress in Biomimetic Additive Manufacturing Technology: From Materials to Functional Structures
Abstract
Nature has developed high‐performance materials and structures over millions of years of evolution and provides valuable sources of inspiration for the design of next‐generation structural materials, given the variety of excellent mechanical, hydrodynamic, optical, and electrical properties. Biomimicry, by learning from nature's concepts and design principles, is driving a paradigm shift in modern materials science and technology. However, the complicated structural architectures in nature far exceed the capability of traditional design and fabrication technologies, which hinders the progress of biomimetic study and its usage in engineering systems. Additive manufacturing (three‐dimensional (3D) printing) has created new opportunities for manipulating and mimicking the intrinsically multiscale, multimaterial, and multifunctional structures in nature. Here, an overview of recent developments in 3D printing of biomimetic reinforced mechanics, shape changing, and hydrodynamic structures, as well as optical and electrical devices is provided. The inspirations are from various creatures such as nacre, lobster claw, pine cone, flowers, octopus, butterfly wing, fly eye, etc., and various 3D‐printing technologies are discussed. Future opportunities for the development of biomimetic 3D‐printing technology to fabricate next‐generation functional materials and structures in mechanical, electrical, optical, and biomedical engineering are also outlined.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
3D bioprinting of tissues and organs
Murphy, S. V., & Atala, A. (2014) · Nature Biotechnology · doi:10.1038/nbt.2958 · Cited by 7,034
Metal Additive Manufacturing: A Review
Frazier, W. E. (2014) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-014-0958-z · Cited by 5,984
Hydrogel: Preparation, characterization, and applications: A review
Ahmed, E. M. (2015) · Journal of Advanced Research · doi:10.1016/j.jare.2013.07.006 · Cited by 5,800
Bioinspired structural materials
Wegst, U. G. K., Bai, H., Saiz, E., Tomsia, A. P., & Ritchie, R. O. (2015) · Nature Materials · doi:10.1038/nmat4089 · Cited by 4,721
Sydney Gladman, A., Matsumoto, E. A., Nuzzo, R. G., Mahadevan, L., & Lewis, J. A. (2016) · Nature Materials · doi:10.1038/nmat4544 · Cited by 3,027
The status, challenges, and future of additive manufacturing in engineering
Gao, W., Zhang, Y., Ramanujan, D., Ramani, K., Chen, Y., Williams, C. B., Wang, C. C. L., Shin, Y. C., Zhang, S., & Zavattieri, P. D. (2015) · Computer-Aided Design · doi:10.1016/j.cad.2015.04.001 · Cited by 2,631
Self-citationHammock, M. L., Chortos, A., Tee, B. C. ‐., Tok, J. B. ‐., & Bao, Z. (2013) · Advanced Materials · doi:10.1002/adma.201302240 · Cited by 2,396
Pursuing prosthetic electronic skin
Chortos, A., Liu, J., & Bao, Z. (2016) · Nature Materials · doi:10.1038/nmat4671 · Cited by 2,396
Continuous liquid interface production of 3D objects
Tumbleston, J. R., Shirvanyants, D., Ermoshkin, N., Janusziewicz, R., Johnson, A. R., Kelly, D., Chen, K., Pinschmidt, R., Rolland, J. P., Ermoshkin, A., et al. (2015) · Science · doi:10.1126/science.aaa2397 · Cited by 2,278
An integrated design and fabrication strategy for entirely soft, autonomous robots
Wehner, M., Truby, R. L., Fitzgerald, D. J., Mosadegh, B., Whitesides, G. M., Lewis, J. A., & Wood, R. J. (2016) · Nature · doi:10.1038/nature19100 · Cited by 2,127
3D bioprinting of vascularized, heterogeneous cell-laden tissue constructs
Kolesky, D. B., Truby, R. L., Gladman, A. S., Busbee, T. A., Homan, K. A., & Lewis, J. A. (2014) · Advanced Materials · doi:10.1002/adma.201305506 · Cited by 2,102
Additive manufacturing: technology, applications and research needs
Guo, N., & Leu, M. C. (2013) · Frontiers of Mechanical Engineering · doi:10.1007/s11465-013-0248-8 · Cited by 2,073
Additive manufacturing and its societal impact: a literature review
Huang, S. H., Liu, P., Mokasdar, A., & Hou, L. (2013) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-012-4558-5 · Cited by 1,862
Tough, Bio-Inspired Hybrid Materials
Munch, E., Launey, M. E., Alsem, D. H., Saiz, E., Tomsia, A. P., & Ritchie, R. O. (2008) · Science · doi:10.1126/science.1164865 · Cited by 1,822
Hinton, T. J., Jallerat, Q., Palchesko, R. N., Park, J. H., Grodzicki, M. S., Shue, H.-J., Ramadan, M. H., Hudson, A. R., & Feinberg, A. W. (2015) · Science Advances · doi:10.1126/sciadv.1500758 · Cited by 1,805
3D‐Printing of Lightweight Cellular Composites
Compton, B. G., & Lewis, J. A. (2014) · Advanced Materials · doi:10.1002/adma.201401804 · Cited by 1,626
Embedded 3D Printing of Strain Sensors within Highly Stretchable Elastomers
Muth, J. T., Vogt, D. M., Truby, R. L., Mengüç, Y., Kolesky, D. B., Wood, R. J., & Lewis, J. A. (2014) · Advanced Materials · doi:10.1002/adma.201400334 · Cited by 1,611
Highly oriented carbon fiber–polymer composites via additive manufacturing
Tekinalp, H. L., Kunc, V., Velez-Garcia, G. M., Duty, C. E., Love, L. J., Naskar, A. K., Blue, C. A., & Ozcan, S. (2014) · Composites Science and Technology · doi:10.1016/j.compscitech.2014.10.009 · Cited by 1,514
High-resolution electrohydrodynamic jet printing
Park, J.-U., Hardy, M., Kang, S. J., Barton, K., Adair, K., Mukhopadhyay, D. K., Lee, C. Y., Strano, M. S., Alleyne, A. G., Georgiadis, J. G., et al. (2007) · Nature Materials · doi:10.1038/nmat1974 · Cited by 1,492
A review on 3D micro-additive manufacturing technologies
Vaezi, M., Seitz, H., & Yang, S. (2013) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-012-4605-2 · Cited by 1,293
4D Printing: Multi‐Material Shape Change
Tibbits, S. (2014) · Architectural Design · doi:10.1002/ad.1710 · Cited by 1,188
Directional adhesion of superhydrophobic butterfly wings
Zheng, Y., Gao, X., & Jiang, L. (2007) · Soft Matter · doi:10.1039/b612667g · Cited by 1,187
Thompson, S. M., Bian, L., Shamsaei, N., & Yadollahi, A. (2015) · Additive Manufacturing · doi:10.1016/j.addma.2015.07.001 · Cited by 1,179
Three-dimensional printing of continuous-fiber composites by in-nozzle impregnation
Matsuzaki, R., Ueda, M., Namiki, M., Jeong, T.-K., Asahara, H., Horiguchi, K., Nakamura, T., Todoroki, A., & Hirano, Y. (2016) · Scientific Reports · doi:10.1038/srep23058 · Cited by 1,171
Momeni, F., M.Mehdi Hassani.N, S., Liu, X., & Ni, J. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.02.068 · Cited by 1,165
Multimaterial 4D Printing with Tailorable Shape Memory Polymers
Ge, Q., Sakhaei, A. H., Lee, H., Dunn, C. K., Fang, N. X., & Dunn, M. L. (2016) · Scientific Reports · doi:10.1038/srep31110 · Cited by 1,160
Bioinspired Interfaces with Superwettability: From Materials to Chemistry
Su, B., Tian, Y., & Jiang, L. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.5b12728 · Cited by 1,159
Digital cameras with designs inspired by the arthropod eye
Song, Y. M., Xie, Y., Malyarchuk, V., Xiao, J., Jung, I., Choi, K.-J., Liu, Z., Park, H., Lu, C., Kim, R.-H., et al. (2013) · Nature · doi:10.1038/nature12083 · Cited by 1,143
Multiprocess 3D printing for increasing component functionality
MacDonald, E., & Wicker, R. (2016) · Science · doi:10.1126/science.aaf2093 · Cited by 961
Strong, tough and stiff bioinspired ceramics from brittle constituents
Bouville, F., Maire, E., Meille, S., Van de Moortèle, B., Stevenson, A. J., & Deville, S. (2014) · Nature Materials · doi:10.1038/nmat3915 · Cited by 959
A global sustainability perspective on 3D printing technologies
Gebler, M., Schoot Uiterkamp, A. J. M., & Visser, C. (2014) · Energy Policy · doi:10.1016/j.enpol.2014.08.033 · Cited by 950
Hydrogel bioprinted microchannel networks for vascularization of tissue engineering constructs
Bertassoni, L. E., Cecconi, M., Manoharan, V., Nikkhah, M., Hjortnaes, J., Cristino, A. L., Barabaschi, G., Demarchi, D., Dokmeci, M. R., Yang, Y., et al. (2014) · Lab Chip · doi:10.1039/c4lc00030g · Cited by 944
Self-citationTwo-photon direct laser writing of ultracompact multi-lens objectives
Gissibl, T., Thiele, S., Herkommer, A., & Giessen, H. (2016) · Nature Photonics · doi:10.1038/nphoton.2016.121 · Cited by 916
Chou, H.-H., Nguyen, A., Chortos, A., To, J. W. F., Lu, C., Mei, J., Kurosawa, T., Bae, W.-G., Tok, J. B.-H., & Bao, Z. (2015) · Nature Communications · doi:10.1038/ncomms9011 · Cited by 914
3D printing of smart materials: A review on recent progresses in 4D printing
Khoo, Z. X., Teoh, J. E. M., Liu, Y., Chua, C. K., Yang, S., An, J., Leong, K. F., & Yeong, W. Y. (2015) · Virtual and Physical Prototyping · doi:10.1080/17452759.2015.1097054 · Cited by 912
Three-dimensional printing of transparent fused silica glass
Kotz, F., Arnold, K., Bauer, W., Schild, D., Keller, N., Sachsenheimer, K., Nargang, T. M., Richter, C., Helmer, D., & Rapp, B. E. (2017) · Nature · doi:10.1038/nature22061 · Cited by 876
Mannoor, M. S., Jiang, Z., James, T., Kong, Y. L., Malatesta, K. A., Soboyejo, W. O., Verma, N., Gracias, D. H., & McAlpine, M. C. (2013) · Nano Letters · doi:10.1021/nl4007744 · Cited by 874
Wang, B., Yang, W., McKittrick, J., & Meyers, M. A. (2016) · Progress in Materials Science · doi:10.1016/j.pmatsci.2015.06.001 · Cited by 873
Instrumented cardiac microphysiological devices via multimaterial three-dimensional printing
Lind, J. U., Busbee, T. A., Valentine, A. D., Pasqualini, F. S., Yuan, H., Yadid, M., Park, S.-J., Kotikian, A., Nesmith, A. P., Campbell, P. H., et al. (2017) · Nature Materials · doi:10.1038/nmat4782 · Cited by 863
Inspiration and application in the evolution of biomaterials
Huebsch, N., & Mooney, D. J. (2009) · Nature · doi:10.1038/nature08601 · Cited by 855
Multimaterial magnetically assisted 3D printing of composite materials
Kokkinis, D., Schaffner, M., & Studart, A. R. (2015) · Nature Communications · doi:10.1038/ncomms9643 · Cited by 848
Bioinspired engineering of honeycomb structure – Using nature to inspire human innovation
Zhang, Q., Yang, X., Li, P., Huang, G., Feng, S., Shen, C., Han, B., Zhang, X., Jin, F., Xu, F., et al. (2015) · Progress in Materials Science · doi:10.1016/j.pmatsci.2015.05.001 · Cited by 836
Highly Sensitive Skin‐Mountable Strain Gauges Based Entirely on Elastomers
Lu, N., Lu, C., Yang, S., & Rogers, J. (2012) · Advanced Functional Materials · doi:10.1002/adfm.201200498 · Cited by 825
Omnidirectional Printing of 3D Microvascular Networks
Wu, W., DeConinck, A., & Lewis, J. A. (2011) · Advanced Materials · doi:10.1002/adma.201004625 · Cited by 819
A Simple, Low-Cost Conductive Composite Material for 3D Printing of Electronic Sensors
Leigh, S. J., Bradley, R. J., Purssell, C. P., Billson, D. R., & Hutchins, D. A. (2012) · PLoS ONE · doi:10.1371/journal.pone.0049365 · Cited by 787
Active materials by four-dimension printing
Ge, Q., Qi, H. J., & Dunn, M. L. (2013) · Applied Physics Letters · doi:10.1063/1.4819837 · Cited by 785
Geometry and Mechanics in the Opening of Chiral Seed Pods
Armon, S., Efrati, E., Kupferman, R., & Sharon, E. (2011) · Science · doi:10.1126/science.1203874 · Cited by 783
Additive manufacturing: A framework for implementation
Mellor, S., Hao, L., & Zhang, D. (2014) · International Journal of Production Economics · doi:10.1016/j.ijpe.2013.07.008 · Cited by 777
Bio-inspired design of multiscale structures for function integration
Liu, K., & Jiang, L. (2011) · Nano Today · doi:10.1016/j.nantod.2011.02.002 · Cited by 760
Making sense of 3-D printing: Creating a map of additive manufacturing products and services
Conner, B. P., Manogharan, G. P., Martof, A. N., Rodomsky, L. M., Rodomsky, C. M., Jordan, D. C., & Limperos, J. W. (2014) · Additive Manufacturing · doi:10.1016/j.addma.2014.08.005 · Cited by 750
De Angelis, F., Gentile, F., Mecarini, F., Das, G., Moretti, M., Candeloro, P., Coluccio, M. L., Cojoc, G., Accardo, A., Liberale, C., et al. (2011) · Nature Photonics · doi:10.1038/nphoton.2011.222 · Cited by 736
Structural Design Elements in Biological Materials: Application to Bioinspiration
Naleway, S. E., Porter, M. M., McKittrick, J., & Meyers, M. A. (2015) · Advanced Materials · doi:10.1002/adma.201502403 · Cited by 730
Ge, Q., Dunn, C. K., Qi, H. J., & Dunn, M. L. (2014) · Smart Materials and Structures · doi:10.1088/0964-1726/23/9/094007 · Cited by 726
Phototactic guidance of a tissue-engineered soft-robotic ray
Park, S.-J., Gazzola, M., Park, K. S., Park, S., Di Santo, V., Blevins, E. L., Lind, J. U., Campbell, P. H., Dauth, S., Capulli, A. K., et al. (2016) · Science · doi:10.1126/science.aaf4292 · Cited by 721
Jakus, A. E., Secor, E. B., Rutz, A. L., Jordan, S. W., Hersam, M. C., & Shah, R. N. (2015) · ACS Nano · doi:10.1021/acsnano.5b01179 · Cited by 710
Direct 4D Printing Via Active Composite Materials
Ding, Z., Yuan, C., Peng, X., Wang, T., Qi, H. J., & Dunn, M. L. (2017) · Science Advances · doi:10.1126/sciadv.1602890 · Cited by 692
Taboas, J. M., Maddox, R. D., Krebsbach, P. H., & Hollister, S. J. (2003) · Biomaterials · doi:10.1016/s0142-9612(02)00276-4 · Cited by 691
Kim, H., Ge, J., Kim, J., Choi, S.-E., Lee, H., Lee, H., Park, W., Yin, Y., & Kwon, S. (2009) · Nature Photonics · doi:10.1038/nphoton.2009.141 · Cited by 680
Composites Reinforced in Three Dimensions by Using Low Magnetic Fields
Erb, R. M., Libanori, R., Rothfuchs, N., & Studart, A. R. (2012) · Science · doi:10.1126/science.1210822 · Cited by 675
Darabi, M. A., Khosrozadeh, A., Mbeleck, R., Liu, Y., Chang, Q., Jiang, J., Cai, J., Wang, Q., Luo, G., & Xing, M. (2017) · Advanced Materials · doi:10.1002/adma.201700533 · Cited by 672
Magnetically aligned graphite electrodes for high-rate performance Li-ion batteries
Billaud, J., Bouville, F., Magrini, T., Villevieille, C., & Studart, A. R. (2016) · Nature Energy · doi:10.1038/nenergy.2016.97 · Cited by 671
Calcitic microlenses as part of the photoreceptor system in brittlestars
Aizenberg, J., Tkachenko, A., Weiner, S., Addadi, L., & Hendler, G. (2001) · Nature · doi:10.1038/35090573 · Cited by 656
Self-shaping composites with programmable bioinspired microstructures
Erb, R. M., Sander, J. S., Grisch, R., & Studart, A. R. (2013) · Nature Communications · doi:10.1038/ncomms2666 · Cited by 656
Writing in the granular gel medium
Bhattacharjee, T., Zehnder, S. M., Rowe, K. G., Jain, S., Nixon, R. M., Sawyer, W. G., & Angelini, T. E. (2015) · Science Advances · doi:10.1126/sciadv.1500655 · Cited by 635
Conformal Printing of Electrically Small Antennas on Three‐Dimensional Surfaces
Adams, J. J., Duoss, E. B., Malkowski, T. F., Motala, M. J., Ahn, B. Y., Nuzzo, R. G., Bernhard, J. T., & Lewis, J. A. (2011) · Advanced Materials · doi:10.1002/adma.201003734 · Cited by 630
Printing, folding and assembly methods for forming 3D mesostructures in advanced materials
Zhang, Y., Zhang, F., Yan, Z., Ma, Q., Li, X., Huang, Y., & Rogers, J. A. (2017) · Nature Reviews Materials · doi:10.1038/natrevmats.2017.19 · Cited by 620
Self-citationFarahani, R. D., Dubé, M., & Therriault, D. (2016) · Advanced Materials · doi:10.1002/adma.201506215 · Cited by 604
Hierarchical structure and mechanical properties of nacre: a review
Sun, J., & Bhushan, B. (2012) · RSC Advances · doi:10.1039/c2ra20218b · Cited by 601
The cortical angiome: an interconnected vascular network with noncolumnar patterns of blood flow
Blinder, P., Tsai, P. S., Kaufhold, J. P., Knutsen, P. M., Suhl, H., & Kleinfeld, D. (2013) · Nature Neuroscience · doi:10.1038/nn.3426 · Cited by 573
Direct 3D bioprinting of prevascularized tissue constructs with complex microarchitecture
Zhu, W., Qu, X., Zhu, J., Ma, X., Patel, S., Liu, J., Wang, P., Lai, C. S. E., Gou, M., Xu, Y., et al. (2017) · Biomaterials · doi:10.1016/j.biomaterials.2017.01.042 · Cited by 567
Reversible Switching of Hydrogel-Actuated Nanostructures into Complex Micropatterns
Sidorenko, A., Krupenkin, T., Taylor, A., Fratzl, P., & Aizenberg, J. (2007) · Science · doi:10.1126/science.1135516 · Cited by 562
The Salvinia Paradox: Superhydrophobic Surfaces with Hydrophilic Pins for Air Retention Under Water
Barthlott, W., Schimmel, T., Wiersch, S., Koch, K., Brede, M., Barczewski, M., Walheim, S., Weis, A., Kaltenmaier, A., Leder, A., et al. (2010) · Advanced Materials · doi:10.1002/adma.200904411 · Cited by 556
Soft network composite materials with deterministic and bio-inspired designs
Jang, K.-I., Chung, H. U., Xu, S., Lee, C. H., Luan, H., Jeong, J., Cheng, H., Kim, G.-T., Han, S. Y., Lee, J. W., et al. (2015) · Nature Communications · doi:10.1038/ncomms7566 · Cited by 533
Self-citation3D Printing of Graphene Aerogels
Zhang, Q., Zhang, F., Medarametla, S. P., Li, H., Zhou, C., & Lin, D. (2016) · Small · doi:10.1002/smll.201503524 · Cited by 532
Self-citationYang, Y., Li, X., Zheng, X., Chen, Z., Zhou, Q., & Chen, Y. (2018) · Advanced Materials · doi:10.1002/adma.201704912 · Cited by 525
Self-citationSelf-folding of polymer sheets using local light absorption
Liu, Y., Boyles, J. K., Genzer, J., & Dickey, M. D. (2012) · Soft Matter · doi:10.1039/c1sm06564e · Cited by 523
Designing bioinspired composite reinforcement architectures via 3D magnetic printing
Martin, J. J., Fiore, B. E., & Erb, R. M. (2015) · Nature Communications · doi:10.1038/ncomms9641 · Cited by 515
Saranathan, V., Osuji, C. O., Mochrie, S. G. J., Noh, H., Narayanan, S., Sandy, A., Dufresne, E. R., & Prum, R. O. (2010) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.0909616107 · Cited by 506
Capacitive Soft Strain Sensors via Multicore–Shell Fiber Printing
Frutiger, A., Muth, J. T., Vogt, D. M., Mengüç, Y., Campo, A., Valentine, A. D., Walsh, C. J., & Lewis, J. A. (2015) · Advanced Materials · doi:10.1002/adma.201500072 · Cited by 468
Biomimetic shark skin: design, fabrication and hydrodynamic function
Wen, L., Weaver, J. C., & Lauder, G. V. (2014) · Journal of Experimental Biology · doi:10.1242/jeb.097097 · Cited by 465
Shape-Morphing Materials from Stimuli-Responsive Hydrogel Hybrids
Jeon, S.-J., Hauser, A. W., & Hayward, R. C. (2017) · Accounts of Chemical Research · doi:10.1021/acs.accounts.6b00570 · Cited by 464
Ultrastretchable and Self-Healing Double-Network Hydrogel for 3D Printing and Strain Sensor
Liu, S., & Li, L. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b07445 · Cited by 456
The mechanics and design of a lightweight three-dimensional graphene assembly
Qin, Z., Jung, G. S., Kang, M. J., & Buehler, M. J. (2017) · Science Advances · doi:10.1126/sciadv.1601536 · Cited by 453
Processing metallic glasses by selective laser melting
Pauly, S., Löber, L., Petters, R., Stoica, M., Scudino, S., Kühn, U., & Eckert, J. (2013) · Materials Today · doi:10.1016/j.mattod.2013.01.018 · Cited by 446
3D Printed Stretchable Tactile Sensors
Guo, S., Qiu, K., Meng, F., Park, S. H., & McAlpine, M. C. (2017) · Advanced Materials · doi:10.1002/adma.201701218 · Cited by 445
Nano/Micro‐Manufacturing of Bioinspired Materials: a Review of Methods to Mimic Natural Structures
Zhang, C., Mcadams, D. A., & Grunlan, J. C. (2016) · Advanced Materials · doi:10.1002/adma.201505555 · Cited by 443
3D Printed Quantum Dot Light-Emitting Diodes
Kong, Y. L., Tamargo, I. A., Kim, H., Johnson, B. N., Gupta, M. K., Koh, T.-W., Chin, H.-A., Steingart, D. A., Rand, B. P., & McAlpine, M. C. (2014) · Nano Letters · doi:10.1021/nl5033292 · Cited by 432
Yang, W., Chen, I. H., Gludovatz, B., Zimmermann, E. A., Ritchie, R. O., & Meyers, M. A. (2013) · Advanced Materials · doi:10.1002/adma.201202713 · Cited by 426
3D Printing of Transparent and Conductive Heterogeneous Hydrogel–Elastomer Systems
Tian, K., Bae, J., Bakarich, S. E., Yang, C., Gately, R. D., Spinks, G. M., in het Panhuis, M., Suo, Z., & Vlassak, J. J. (2017) · Advanced Materials · doi:10.1002/adma.201604827 · Cited by 419
Additive manufacturing of biologically-inspired materials
Studart, A. R. (2016) · Chemical Society Reviews · doi:10.1039/c5cs00836k · Cited by 415
All‐Printed Flexible and Stretchable Electronics
Mohammed, M. G., & Kramer, R. (2017) · Advanced Materials · doi:10.1002/adma.201604965 · Cited by 410
High-performance battery electrodes via magnetic templating
Sander, J. S., Erb, R. M., Li, L., Gurijala, A., & Chiang, Y.-M. (2016) · Nature Energy · doi:10.1038/nenergy.2016.99 · Cited by 409
Magnetically assisted slip casting of bioinspired heterogeneous composites
Le Ferrand, H., Bouville, F., Niebel, T. P., & Studart, A. R. (2015) · Nature Materials · doi:10.1038/nmat4419 · Cited by 400
Hierarchically Enhanced Impact Resistance of Bioinspired Composites
Gu, G. X., Takaffoli, M., & Buehler, M. J. (2017) · Advanced Materials · doi:10.1002/adma.201700060 · Cited by 396
Tough Composites Inspired by Mineralized Natural Materials: Computation, 3D printing, and Testing
Dimas, L. S., Bratzel, G. H., Eylon, I., & Buehler, M. J. (2013) · Advanced Functional Materials · doi:10.1002/adfm.201300215 · Cited by 385
Li, Y.-C., Zhang, Y. S., Akpek, A., Shin, S. R., & Khademhosseini, A. (2016) · Biofabrication · doi:10.1088/1758-5090/9/1/012001 · Cited by 385
3D Optical Printing of Piezoelectric Nanoparticle–Polymer Composite Materials
Kim, K., Zhu, W., Qu, X., Aaronson, C., McCall, W. R., Chen, S., & Sirbuly, D. J. (2014) · ACS Nano · doi:10.1021/nn503268f · Cited by 374
Actuation systems in plants as prototypes for bioinspired devices
Burgert, I., & Fratzl, P. (2009) · Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences · doi:10.1098/rsta.2009.0003 · Cited by 360
Freeform inkjet printing of cellular structures with bifurcations
Christensen, K., Xu, C., Chai, W., Zhang, Z., Fu, J., & Huang, Y. (2015) · Biotechnology and Bioengineering · doi:10.1002/bit.25501 · Cited by 351
Sequential self-folding of polymer sheets
Liu, Y., Shaw, B., Dickey, M. D., & Genzer, J. (2017) · Science Advances · doi:10.1126/sciadv.1602417 · Cited by 335
3D-printed eagle eye: Compound microlens system for foveated imaging
Thiele, S., Arzenbacher, K., Gissibl, T., Giessen, H. W., & Herkommer, A. (2017) · Science Advances · doi:10.1126/sciadv.1602655 · Cited by 331
Additive manufacturing of multi-directional preforms for composites: opportunities and challenges
Quan, Z., Wu, A., Keefe, M., Qin, X., Yu, J., Suhr, J., Byun, J.-H., Kim, B.-S., & Chou, T.-W. (2015) · Materials Today · doi:10.1016/j.mattod.2015.05.001 · Cited by 324
Large-area flexible 3D optical negative index metamaterial formed by nanotransfer printing
Chanda, D., Shigeta, K., Gupta, S., Cain, T., Carlson, A., Mihi, A., Baca, A. J., Bogart, G. R., Braun, P., & Rogers, J. A. (2011) · Nature Nanotechnology · doi:10.1038/nnano.2011.82 · Cited by 319
Lewicki, J. P., Rodriguez, J. N., Zhu, C., Worsley, M. A., Wu, A. S., Kanarska, Y., Horn, J. D., Duoss, E. B., Ortega, J. M., Elmer, W., et al. (2017) · Scientific Reports · doi:10.1038/srep43401 · Cited by 318
Yang, Y., Chen, Z., Song, X., Zhang, Z., Zhang, J., Shung, K. K., Zhou, Q., & Chen, Y. (2017) · Advanced Materials · doi:10.1002/adma.201605750 · Cited by 316
Self-citationBioinspired Layered Materials with Superior Mechanical Performance
Cheng, Q., Jiang, L., & Tang, Z. (2014) · Accounts of Chemical Research · doi:10.1021/ar400279t · Cited by 315
Printed optics: 3D printing of embedded optical elements for interactive devices
Willis, K., Brockmeyer, E., Hudson, S., & Poupyrev, I. (2012) · Proceedings of the 25th annual ACM symposium on User interface software and technology · doi:10.1145/2380116.2380190 · Cited by 306
Additive Manufacturing: Unlocking the Evolution of Energy Materials
Zhakeyev, A., Wang, P., Zhang, L., Shu, W., Wang, H., & Xuan, J. (2017) · Advanced Science · doi:10.1002/advs.201700187 · Cited by 291
Additive Manufacturing of Optically Transparent Glass
Klein, J., Stern, M., Franchin, G., Kayser, M., Inamura, C., Dave, S., Weaver, J. C., Houk, P., Colombo, P., Yang, M., et al. (2015) · 3D Printing and Additive Manufacturing · doi:10.1089/3dp.2015.0021 · Cited by 289
One-Step Solvent Evaporation-Assisted 3D Printing of Piezoelectric PVDF Nanocomposite Structures
Bodkhe, S., Turcot, G., Gosselin, F. P., & Therriault, D. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b04095 · Cited by 289
3D‐Printed Artificial Microfish
Zhu, W., Li, J., Leong, Y. J., Rozen, I., Qu, X., Dong, R., Wu, Z., Gao, W., Chung, P. H., Wang, J., et al. (2015) · Advanced Materials · doi:10.1002/adma.201501372 · Cited by 288
A multifunctional skin-like sensor based on a 3D printed thermo-responsive hydrogel
Lei, Z., Wang, Q., & Wu, P. (2017) · Materials Horizons · doi:10.1039/c7mh00262a · Cited by 288
The potential to enhance membrane module design with 3D printing technology
Lee, J.-Y., Tan, W. S., An, J., Chua, C. K., Tang, C. Y., Fane, A. G., & Chong, T. H. (2016) · Journal of Membrane Science · doi:10.1016/j.memsci.2015.11.008 · Cited by 283
Toward an enhanced understanding and implementation of photopolymerization reactions
Bowman, C. N., & Kloxin, C. J. (2008) · AIChE Journal · doi:10.1002/aic.11678 · Cited by 280
3D printing of piezoelectric element for energy focusing and ultrasonic sensing
Chen, Z., Song, X., Lei, L., Chen, X., Fei, C., Chiu, C. T., Qian, X., Ma, T., Yang, Y., Shung, K., et al. (2016) · Nano Energy · doi:10.1016/j.nanoen.2016.06.048 · Cited by 277
Self-citationNguyen, D. T., Meyers, C., Yee, T. D., Dudukovic, N. A., Destino, J. F., Zhu, C., Duoss, E. B., Baumann, T. F., Suratwala, T., Smay, J. E., et al. (2017) · Advanced Materials · doi:10.1002/adma.201701181 · Cited by 273
Gaynor, A. T., Meisel, N. A., Williams, C. B., & Guest, J. K. (2014) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4028439 · Cited by 271
Light curing strategies for lithography-based additive manufacturing of customized ceramics
Mitteramskogler, G., Gmeiner, R., Felzmann, R., Gruber, S., Hofstetter, C., Stampfl, J., Ebert, J., Wachter, W., & Laubersheimer, J. (2014) · Additive Manufacturing · doi:10.1016/j.addma.2014.08.003 · Cited by 263
Tran, P., Ngo, T. D., Ghazlan, A., & Hui, D. (2017) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2016.09.083 · Cited by 261
Bioinspired Materials: from Low to High Dimensional Structure
Zhao, N., Wang, Z., Cai, C., Shen, H., Liang, F., Wang, D., Wang, C., Zhu, T., Guo, J., Wang, Y., et al. (2014) · Advanced Materials · doi:10.1002/adma.201401718 · Cited by 258
3D printing of a mechanically durable superhydrophobic porous membrane for oil–water separation
Lv, J., Gong, Z., He, Z., Yang, J., Chen, Y., Tang, C., Liu, Y., Fan, M., & Lau, W.-M. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta02202f · Cited by 257
Self-citationOrigami by Frontal Photopolymerization
Zhao, Z., Wu, J., Mu, X., Chen, H., Qi, H. J., & Fang, D. (2017) · Science Advances · doi:10.1126/sciadv.1602326 · Cited by 256
Liu, D., & Broer, D. J. (2014) · Langmuir · doi:10.1021/la500454d · Cited by 243
Gecko-Inspired Carbon Nanotube-Based Self-Cleaning Adhesives
Sethi, S., Ge, L., Ci, L., Ajayan, P. M., & Dhinojwala, A. (2008) · Nano Letters · doi:10.1021/nl0727765 · Cited by 241
A Bioactive Carbon Nanotube‐Based Ink for Printing 2D and 3D Flexible Electronics
Shin, S. R., Farzad, R., Tamayol, A., Manoharan, V., Mostafalu, P., Zhang, Y. S., Akbari, M., Jung, S. M., Kim, D., Comotto, M., et al. (2016) · Advanced Materials · doi:10.1002/adma.201506420 · Cited by 236
Development of Miniaturized Walking Biological Machines
Chan, V., Park, K., Collens, M. B., Kong, H., Saif, T. A., & Bashir, R. (2012) · Scientific Reports · doi:10.1038/srep00857 · Cited by 228
Saleh, M. S., Hu, C., & Panat, R. (2017) · Science Advances · doi:10.1126/sciadv.1601986 · Cited by 203
3D-Printed Wood: Programming Hygroscopic Material Transformations
Correa, D., Papadopoulou, A., Guberan, C., Jhaveri, N., Reichert, S., Menges, A., & Tibbits, S. (2015) · 3D Printing and Additive Manufacturing · doi:10.1089/3dp.2015.0022 · Cited by 202
The Billion Cell Construct: Will Three-Dimensional Printing Get Us There?
Miller, J. S. (2014) · PLoS Biology · doi:10.1371/journal.pbio.1001882 · Cited by 199
Varghese, T., Hollar, C., Richardson, J., Kempf, N., Han, C., Gamarachchi, P., Estrada, D., Mehta, R. J., & Zhang, Y. (2016) · Scientific Reports · doi:10.1038/srep33135 · Cited by 193
Pattern Transformation of Heat-Shrinkable Polymer by Three-Dimensional (3D) Printing Technique
Zhang, Q., Yan, D., Zhang, K., & Hu, G. (2015) · Scientific Reports · doi:10.1038/srep08936 · Cited by 188
Multifunctional Integration: From Biological to Bio-Inspired Materials
Liu, K., & Jiang, L. (2011) · ACS Nano · doi:10.1021/nn203250y · Cited by 182
Gecko‐Inspired Controllable Adhesive Structures Applied to Micromanipulation
Mengüç, Y., Yang, S. Y., Kim, S., Rogers, J. A., & Sitti, M. (2012) · Advanced Functional Materials · doi:10.1002/adfm.201101783 · Cited by 180
Biomimetic additive manufactured polymer composites for improved impact resistance
Gu, G. X., Takaffoli, M., Hsieh, A. J., & Buehler, M. J. (2016) · Extreme Mechanics Letters · doi:10.1016/j.eml.2016.09.006 · Cited by 180
Structural optimization of 3D-printed synthetic spider webs for high strength
Qin, Z., Compton, B. G., Lewis, J. A., & Buehler, M. J. (2015) · Nature Communications · doi:10.1038/ncomms8038 · Cited by 179
Wu, D., Wang, J., Niu, L., Zhang, X. L., Wu, S. Z., Chen, Q., Lee, L. P., & Sun, H. B. (2014) · Advanced Optical Materials · doi:10.1002/adom.201400175 · Cited by 174
Biologically Inspired Dynamic Material Systems
Studart, A. R. (2015) · Angewandte Chemie International Edition · doi:10.1002/anie.201410139 · Cited by 167
Colloidal processing: enabling complex shaped ceramics with unique multiscale structures
Franks, G. V., Tallon, C., Studart, A. R., Sesso, M. L., & Leo, S. (2017) · Journal of the American Ceramic Society · doi:10.1111/jace.14705 · Cited by 167
Mechanics of composite elasmoid fish scale assemblies and their bioinspired analogues
Browning, A., Ortiz, C., & Boyce, M. C. (2013) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2012.11.003 · Cited by 166
Yang, Y., Chen, Z., Song, X., Zhu, B., Hsiai, T., Wu, P.-I., Xiong, R., Shi, J., Chen, Y., Zhou, Q., et al. (2016) · Nano Energy · doi:10.1016/j.nanoen.2016.02.045 · Cited by 166
Self-citationFu, K., Moreno, D., Yang, M., & Wood, K. L. (2014) · Journal of Mechanical Design · doi:10.1115/1.4028289 · Cited by 165
Biomimetic gyroid nanostructures exceeding their natural origins
Gan, Z., Turner, M. D., & Gu, M. (2016) · Science Advances · doi:10.1126/sciadv.1600084 · Cited by 164
Bristled shark skin: a microgeometry for boundary layer control?
Lang, A. W., Motta, P., Hidalgo, P., & Westcott, M. (2008) · Bioinspiration & Biomimetics · doi:10.1088/1748-3182/3/4/046005 · Cited by 159
Ceramic fabrication using Mask-Image-Projection-based Stereolithography integrated with tape-casting
Song, X., Chen, Y., Lee, T., Wu, S., & Cheng, L. (2015) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2015.06.022 · Cited by 153
Self-citationOliver, K., Seddon, A. M., & Trask, R. S. (2016) · Journal of Materials Science · doi:10.1007/s10853-016-0295-8 · Cited by 151
Printing nature: Unraveling the role of nacre's mineral bridges
Gu, G. X., Libonati, F., Wettermark, S. D., & Buehler, M. J. (2017) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2017.05.007 · Cited by 151
Establishment of a fabrication method for a long-term actuated hybrid cell robot
Kim, J., Park, J., Yang, S., Baek, J., Kim, B., Lee, S. H., Yoon, E.-S., Chun, K., & Park, S. (2007) · Lab on a Chip · doi:10.1039/b705367c · Cited by 150
Three-Dimensional-Printing of Bio-Inspired Composites
Gu, G. X., Su, I., Sharma, S., Voros, J. L., Zhao Qin, A., & Buehler, M. J. (2016) · Journal of Biomechanical Engineering · doi:10.1115/1.4032423 · Cited by 148
3D printed components with ultrasonically arranged microscale structure
Llewellyn-Jones, T. M., Drinkwater, B. W., & Trask, R. S. (2016) · Smart Materials and Structures · doi:10.1088/0964-1726/25/2/02lt01 · Cited by 147
Magnetic freeze casting inspired by nature
Porter, M. M., Yeh, M., Strawson, J., Goehring, T., Lujan, S., Siripasopsotorn, P., Meyers, M. A., & McKittrick, J. M. (2012) · Materials Science and Engineering A · doi:10.1016/j.msea.2012.07.058 · Cited by 146
Lee, C., & Tarbutton, J. A. (2014) · Smart Materials and Structures · doi:10.1088/0964-1726/23/9/095044 · Cited by 143
Bio-inspired “jigsaw”-like interlocking sutures: Modeling, optimization, 3D printing and testing
Malik, I. A., Mirkhalaf, M., & Barthelat, F. (2017) · Journal of the Mechanics and Physics of Solids · doi:10.1016/j.jmps.2017.03.003 · Cited by 143
3D-printed fluidic networks as vasculature for engineered tissue
Kinstlinger, I. S., & Miller, J. S. (2016) · Lab on a Chip · doi:10.1039/c6lc00193a · Cited by 141
Luo, G., Teh, K. S., Liu, Y., Zang, X., Wen, Z., & Lin, L. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b08909 · Cited by 140
Flexibility and protection by design: imbricated hybrid microstructures of bio-inspired armor
Rudykh, S., Ortiz, C., & Boyce, M. C. (2015) · Soft Matter · doi:10.1039/c4sm02907k · Cited by 139
High‐Power Actuation from Molecular Photoswitches in Enantiomerically Paired Soft Springs
Aßhoff, S. J., Lancia, F., Iamsaard, S., Matt, B., Kudernác, T., Fletcher, S. P., & Katsonis, N. (2017) · Angewandte Chemie International Edition · doi:10.1002/anie.201611325 · Cited by 127
Biologically inspired LED lens from cuticular nanostructures of firefly lantern
Kim, J., Lee, Y., Kim, H. G., Choi, K.-J., Kweon, H., Park, S., & Jeong, K. (2012) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1213331109 · Cited by 124
Direct-write assembly of biomimetic microvascular networks for efficient fluid transport
Wu, W., Hansen, C. J., Aragón, A. M., Geubelle, P. H., White, S. R., & Lewis, J. A. (2009) · Soft Matter · doi:10.1039/b918436h · Cited by 123
Paper as Active Layer in Inkjet-Printed Capacitive Humidity Sensors
Gaspar, C., Olkkonen, J. T., Passoja, S., et al. (2017) · Sensors · doi:10.3390/s17071464 · Cited by 122
Kamat, S., Keßler, H., Ballarini, R., Nassirou, M., & Heuer, A. H. (2004) · Acta Materialia · doi:10.1016/j.actamat.2004.01.030 · Cited by 115
Numerical simulation of ballistic impact behavior of bio-inspired scale-like protection system
Liu, P., Zhu, D., Yao, Y., Wang, J., & Bui, T. Q. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.03.040 · Cited by 109
A comparative study of bio-inspired protective scales using 3D printing and mechanical testing
Martini, R., Balit, Y., & Barthelat, F. (2017) · Acta Biomaterialia · doi:10.1016/j.actbio.2017.03.025 · Cited by 109
Sherman, V. R., Quan, H., Yang, W., Ritchie, R. O., & Meyers, M. A. (2016) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2016.10.001 · Cited by 108
Bio-inspired self-shaping ceramics
Bargardi, F. L., Ferrand, H. L., Libanori, R., & Studart, A. R. (2016) · Nature Communications · doi:10.1038/ncomms13912 · Cited by 107
i3DP, a robust 3D printing approach enabling genetic post-printing surface modification
Wang, X., Cai, X., Guo, Q., Zhang, T., Kobe, B. A., & Yang, J. (2013) · Chemical Communications · doi:10.1039/c3cc45817b · Cited by 106
Wang, Z., Jiang, F. D., Zhang, Y., You, Y., Wang, Z., & Guan, Z. (2014) · ACS Nano · doi:10.1021/nn506960f · Cited by 105
Lu, L., Guo, P. Y., & Pan, Y. (2017) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4035964 · Cited by 105
Yan, P., Brown, E., Su, Q., Li, J., Wang, J., Xu, C., Zhou, C., & Lin, D. L. (2017) · Small · doi:10.1002/smll.201701756 · Cited by 105
Self-citation3D Printing of Highly Conductive Nanocomposites for the Functional Optimization of Liquid Sensors
Chizari, K., Daoud, M. A., Ravindran, A. R., & Therriault, D. (2016) · Small · doi:10.1002/smll.201601695 · Cited by 104
An, B. W., Kim, K., Kim, M., Kim, S.-Y., Hur, S. H., & Park, J. (2015) · Small · doi:10.1002/smll.201403131 · Cited by 103
Song, J., Reichert, S., Kallai, I., Gazit, D., Wund, M. A., Boyce, M. C., & Christine Ortiz, B. (2010) · Journal of Structural Biology · doi:10.1016/j.jsb.2010.04.009 · Cited by 98
3D-printing and mechanics of bio-inspired articulated and multi-material structures
Porter, M. M., Ravikumar, N., Barthelat, F., & Martini, R. (2016) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2016.12.016 · Cited by 98
Printable cellulose-based electroconductive composites for sensing elements in paper electronics
Barras, R., Cunha, I., Gaspar, D., Fortunato, E. M. C., Martins, R., & Pereira, L. (2017) · Flexible and Printed Electronics · doi:10.1088/2058-8585/aa5ef9 · Cited by 98
3D Network Magnetophotonic Crystals Fabricated on Morpho Butterfly Wing Templates
Peng, W., Zhu, S., Wang, W., Zhang, W., Gu, J., Hu, X., Zhang, D., & Chen, Z. (2012) · Advanced Functional Materials · doi:10.1002/adfm.201103032 · Cited by 95
Self-citation3D printable composite dough for stretchable, ultrasensitive and body-patchable strain sensors
Kim, J. Y., Ji, S., Jung, S., Ryu, B.-H., Kim, H., Lee, S. S., Choi, Y., & Jeong, S. (2017) · Nanoscale · doi:10.1039/c7nr01865g · Cited by 95
Biologically Inspired Organic Light-Emitting Diodes
Kim, J.-J., Lee, J. H., Yang, S., Kim, H. G., Kweon, H., Yoo, S., & Jeong, K. (2016) · Nano Letters · doi:10.1021/acs.nanolett.5b05183 · Cited by 94
Kwok, T.-H., Wang, C. C. L., Deng, D., Zhang, Y., & Chen, Y. (2015) · Journal of Mechanical Design · doi:10.1115/1.4031023 · Cited by 93
Self-citationFlexible self-healing nanocomposites for recoverable motion sensor
Yang, Y., Zhu, B., Yin, D., Wei, J., Wang, Z., Xiong, R., Shi, J., Liu, Z., & Lei, Q. (2015) · Nano Energy · doi:10.1016/j.nanoen.2015.07.023 · Cited by 90
Self-citationShape-Changing Photodegradable Hydrogels for Dynamic 3D Cell Culture
Käpylä, E., Delgado, S. M., & Kasko, A. M. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b05527 · Cited by 89
Wassenbergh, S. V., van Manen, K., Marcroft, T. A., Alfaro, M. E., & Stamhuis, E. J. (2014) · Journal of The Royal Society Interface · doi:10.1098/rsif.2014.1146 · Cited by 87
Shear induced alignment of short nanofibers in 3D printed polymer composites
Yunus, D. E., Shi, W., Sohrabi, S., et al. (2016) · Nanotechnology · doi:10.1088/0957-4484/27/49/495302 · Cited by 87
Soft Polymers for Building up Small and Smallest Blood Supplying Systems by Stereolithography
Meyer, W., Engelhardt, S., Novosel, E. C., Elling, B., Wegener, M., & Krüger, H. (2012) · Journal of Functional Biomaterials · doi:10.3390/jfb3020257 · Cited by 86
Laser microstructuring for fabricating superhydrophobic polymeric surfaces
Cardoso, M. R., Tribuzi, V., Balogh, D. T., Misoguti, L., & Mendonça, C. R. (2010) · Applied Surface Science · doi:10.1016/j.apsusc.2010.10.156 · Cited by 85
Wang, Z. J., Zhu, C. N., Hong, W., Wu, Z. L., & Zheng, Q. (2016) · Journal of Materials Chemistry B · doi:10.1039/c6tb02178f · Cited by 81
Additive Manufacturing of Transparent Soda-Lime Glass Using a Filament-Fed Process
Luo, J., Gilbert, L. J., Qu, C., Landers, R. G., Bristow, D. A., & Kinzel, E. C. (2016) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4035182 · Cited by 80
Ultra-compact on-chip LED collimation optics by 3D femtosecond direct laser writing
Thiele, S., Gissibl, T., Giessen, H. W., & Herkommer, A. (2016) · Optics Letters · doi:10.1364/ol.41.003029 · Cited by 67
Ultrasonic assembly of anisotropic short fibre reinforced composites
Scholz, M.-S., Drinkwater, B. W., & Trask, R. S. (2013) · Ultrasonics · doi:10.1016/j.ultras.2013.12.001 · Cited by 66
Torsional properties of helix-reinforced composites fabricated by magnetic freeze casting
Porter, M. M., Meraz, L., Calderon, A., Choi, H., Chouhan, A., Wang, L. Z., Meyers, M. A., & McKittrick, J. M. (2014) · Composite Structures · doi:10.1016/j.compstruct.2014.08.033 · Cited by 65
Understanding and overcoming shear alignment of fibers during extrusion
Martin, J. J., Riederer, M. S., Krebs, M. D., & Erb, R. M. (2014) · Soft Matter · doi:10.1039/c4sm02108h · Cited by 64
Origami-Based Self-Folding Structure Design and Fabrication Using Projection Based Stereolithography
Deng, D., & Chen, Y. (2014) · Journal of Mechanical Design · doi:10.1115/1.4029066 · Cited by 60
Self-citationvan den Ende, D., van Kempen, S. E., Wu, X., Groen, P., Randall, C. A., & van der Zwaag, S. (2012) · Journal of Applied Physics · doi:10.1063/1.4729814 · Cited by 60
Morphogenesis and mechanostabilization of complex natural and 3D printed shapes
Tiwary, C. S., Kishore, S., Sarkar, S., Mahapatra, D. R., Ajayan, P. M., & Chattopadhyay, K. (2015) · Science Advances · doi:10.1126/sciadv.1400052 · Cited by 58
Martini, R., & Barthelat, F. (2016) · Journal of the Mechanics and Physics of Solids · doi:10.1016/j.jmps.2016.04.009 · Cited by 56
Synergetic Material and Structure Optimization Yields Robust Spider Web Anchorages
Pugno, N. M., Cranford, S. W., & Buehler, M. J. (2013) · Small · doi:10.1002/smll.201201343 · Cited by 55
Holmes, L. R., & Riddick, J. C. (2013) · JOM · doi:10.1007/s11837-013-0828-4 · Cited by 50
Representative Sinusoids for Hepatic Four-Scale Pharmacokinetics Simulations
Schwen, L. O., Schenk, A., Kreutz, C., Timmer, J., Rodríguez, M. M. B., Kuepfer, L., & Preußer, T. (2015) · PLoS ONE · doi:10.1371/journal.pone.0133653 · Cited by 47
Frølich, S., Weaver, J. C., Dean, M. N., & Birkedal, H. (2017) · Advanced Engineering Materials · doi:10.1002/adem.201600848 · Cited by 43
Jamshidinia, M., Atabaki, M. M., Zahiri, M., Kelly, S. M., sadek, A. A., & Kovacevic, R. (2015) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2015.07.006 · Cited by 41
Meniscus process optimization for smooth surface fabrication in Stereolithography
Pan, Y., & Chen, Y. (2016) · Additive manufacturing · doi:10.1016/j.addma.2016.05.004 · Cited by 40
Self-citationShape-Morphing Chromonic Liquid Crystal Hydrogels
Kularatne, R. S., Kim, H., Ammanamanchi, M., Hayenga, H. N., & Ware, T. H. (2016) · Chemistry of Materials · doi:10.1021/acs.chemmater.6b04553 · Cited by 37
Cited by
Material-structure-performance integrated laser-metal additive manufacturing
Gu, D., Shi, X., Poprawe, R., Bourell, D. L., Setchi, R., & Zhu, J. (2021) · Science · doi:10.1126/science.abg1487 · Cited by 1,703
Advances in 4D Printing: Materials and Applications
Kuang, X., Roach, D. J., Wu, J., Hamel, C. M., Ding, Z., Wang, T., Dunn, M. L., & Qi, H. J. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201805290 · Cited by 1,095
Feng, J., Fu, J., Yao, X., & He, Y. (2022) · International Journal of Extreme Manufacturing · doi:10.1088/2631-7990/ac5be6 · Cited by 813
Bioinspired Designs of Superhydrophobic and Superhydrophilic Materials
Si, Y., Dong, Z., & Jiang, L. (2018) · ACS Central Science · doi:10.1021/acscentsci.8b00504 · Cited by 507
Beautiful and Functional: A Review of Biomimetic Design in Additive Manufacturing
du Plessis, A., Broeckhoven, C., Yadroitsava, I., Yadroitsev, I., Hands, C. H., Kunju, R., & Bhate, D. (2019) · Additive Manufacturing · doi:10.1016/j.addma.2019.03.033 · Cited by 448
Metadata
- Authors
- Yang, Y., Song, X., Li, X., Chen, Z., Zhou, C., Zhou, Q., & Chen, Y.
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2018-06-19
- Volume
- 30
- Issue
- 36
- Pages
- e1706539-e1706539
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W2809416073
- Cited by
- 538
- References
- 212
- FWCI
- 24.57
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.