The DOI matches its Crossref record; 207 of the 207 references it cites were found in a registry or an index.
Four-dimensional bioprinting: Current developments and applications in bone tissue engineering
Open accessAbstract
Four-dimensional (4D) bioprinting, in which the concept of time is integrated with three-dimensional (3D) bioprinting as the fourth dimension, has currently emerged as the next-generation solution of tissue engineering as it presents the possibility of constructing complex, functional structures. 4D bioprinting can be used to fabricate dynamic 3D-patterned biological architectures that will change their shapes under various stimuli by employing stimuli-responsive materials. The functional transformation and maturation of printed cell-laden constructs over time are also regarded as 4D bioprinting, providing unprecedented potential for bone tissue engineering. The shape memory properties of printed structures cater to the need for personalized bone defect repair and the functional maturation procedures promote the osteogenic differentiation of stem cells. In this review, we introduce the application of different stimuli-responsive biomaterials in tissue engineering and a series of 4D bioprinting strategies based on functional transformation of printed structures. Furthermore, we discuss the application of 4D bioprinting in bone tissue engineering, as well as the current challenges and future perspectives. STATEMENTS OF SIGNIFICANCE: In this review, we have demonstrated the 4D bioprinting technologies, which integrate the concept of time within the traditional 3D bioprinting technology as the fourth dimension and facilitate the fabrications of complex, functional biological architectures. These 4D bioprinting structures could go through shape or functional transformation over time via using different stimuli-responsive biomaterials and a series of 4D bioprinting strategies. Moreover, by summarizing potential applications of 4D bioprinting in the field of bone tissue engineering, these emerging technologies could fulfill unaddressed medical requirements. The further discussions about future challenges and perspectives will give us more inspirations about widespread applications of this emerging technology for tissue engineering in biomedical field.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
3D bioprinting of tissues and organs
Murphy, S. V., & Atala, A. (2014) · Nature Biotechnology · doi:10.1038/nbt.2958 · Cited by 7,034
Hydrogels in pharmaceutical formulations
Peppas, N. (2000) · European Journal of Pharmaceutics and Biopharmaceutics · doi:10.1016/s0939-6411(00)00090-4 · Cited by 4,011
Sydney Gladman, A., Matsumoto, E. A., Nuzzo, R. G., Mahadevan, L., & Lewis, J. A. (2016) · Nature Materials · doi:10.1038/nmat4544 · Cited by 3,027
Bone Tissue Engineering: Recent Advances and Challenges
Amini, A. R., Laurencin, C. T., & Nukavarapu, S. P. (2012) · Critical Reviews in Biomedical Engineering · doi:10.1615/critrevbiomedeng.v40.i5.10 · Cited by 2,336
Recent advances in bone tissue engineering scaffolds
Bose, S., Roy, M., & Bandyopadhyay, A. (2012) · Trends in Biotechnology · doi:10.1016/j.tibtech.2012.07.005 · Cited by 2,206
Cells lying on a bed of microneedles: An approach to isolate mechanical force
Tan, J. L., Tien, J., Pirone, D. M., Gray, D. S., Bhadriraju, K., & Chen, C. S. (2003) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.0235407100 · Cited by 1,962
Review of progress in shape-memory polymers
Liu, C., Qin, H., & Mather, P. T. (2007) · Journal of Materials Chemistry · doi:10.1039/b615954k · Cited by 1,942
25th Anniversary Article: Engineering Hydrogels for Biofabrication
Malda, J., Visser, J., Melchels, F. P., Jüngst, T., Hennink, W. E., Dhert, W. J. A., Groll, J., & Hutmacher, D. W. (2013) · Advanced Materials · doi:10.1002/adma.201302042 · Cited by 1,901
Ulbrich, K., Holá, K., Šubr, V., Bakandritsos, A., Tuček, J., & Zbořil, R. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.5b00589 · Cited by 1,730
Thermoresponsive hydrogels in biomedical applications
Klouda, L., & Mikos, A. G. (2008) · European Journal of Pharmaceutics and Biopharmaceutics · doi:10.1016/j.ejpb.2007.02.025 · Cited by 1,349
Scaffold-free vascular tissue engineering using bioprinting
Norotte, C., Marga, F. S., Niklason, L. E., & Forgacs, G. (2009) · Biomaterials · doi:10.1016/j.biomaterials.2009.06.034 · Cited by 1,339
Kocak, G., Tuncer, C., & Bütün, V. (2017) · Polymer Chemistry · doi:10.1039/c6py01872f · Cited by 1,189
4D Printing: Multi‐Material Shape Change
Tibbits, S. (2014) · Architectural Design · doi:10.1002/ad.1710 · Cited by 1,188
Multimaterial 4D Printing with Tailorable Shape Memory Polymers
Ge, Q., Sakhaei, A. H., Lee, H., Dunn, C. K., Fang, N. X., & Dunn, M. L. (2016) · Scientific Reports · doi:10.1038/srep31110 · Cited by 1,160
Three-dimensional (3D) printed scaffold and material selection for bone repair
Zhang, L., Yang, G., Johnson, B. N., & Jia, X. (2019) · Acta Biomaterialia · doi:10.1016/j.actbio.2018.11.039 · Cited by 865
Multimaterial magnetically assisted 3D printing of composite materials
Kokkinis, D., Schaffner, M., & Studart, A. R. (2015) · Nature Communications · doi:10.1038/ncomms9643 · Cited by 848
Design and Fabrication of Human Skin by Three-Dimensional Bioprinting
Lee, V., Singh, G., Trasatti, J. P., Bjornsson, C., Xu, X., Tran, T. N., Yoo, S.-S., Dai, G., & Karande, P. (2014) · Tissue Engineering Part C: Methods · doi:10.1089/ten.tec.2013.0335 · Cited by 725
Thermo-sensitive polymeric micelles based on poly (N-isopropylacrylamide) as drug carriers
Wei, H., Cheng, S.-X., Zhang, X.-Z., & Zhuo, R.-X. (2009) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2009.05.002 · Cited by 718
Strategies and Molecular Design Criteria for 3D Printable Hydrogels
Jungst, T., Smolan, W., Schacht, K., Scheibel, T., & Groll, J. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.5b00303 · Cited by 712
4D Bioprinting for Biomedical Applications
Gao, B., Yang, Q., Zhao, X., Jin, G., Ma, Y., & Xu, F. (2016) · Trends in Biotechnology · doi:10.1016/j.tibtech.2016.03.004 · Cited by 711
Biomimetic 3D-printed scaffolds for spinal cord injury repair
Koffler, J., Zhu, W., Qu, X., Platoshyn, O., Dulin, J. N., Brock, J., Graham, L., Lu, P., Sakamoto, J., Marsala, M., et al. (2019) · Nature Medicine · doi:10.1038/s41591-018-0296-z · Cited by 708
Biomaterial systems for mechanosensing and actuation
Fratzl, P., & Barth, F. G. (2009) · Nature · doi:10.1038/nature08603 · Cited by 706
Hockaday, L. A., Kang, K. H., Colangelo, N. W., Cheung, P. Y. C., Duan, B., Malone, E., Wu, J., Girardi, L. N., Bonassar, L. J., Lipson, H., et al. (2012) · Biofabrication · doi:10.1088/1758-5082/4/3/035005 · Cited by 683
The Role of Wheat Awns in the Seed Dispersal Unit
Elbaum, R., Zaltzman, L., Burgert, I., & Fratzl, P. (2007) · Science · doi:10.1126/science.1140097 · Cited by 664
Three-dimensional tissue culture based on magnetic cell levitation
Souza, G. R., Molina, J. R., Raphael, R. M., Ozawa, M. G., Stark, D. J., Levin, C. S., Bronk, L. F., Ananta, J. S., Mandelin, J., Georgescu, M.-M., et al. (2010) · Nature Nanotechnology · doi:10.1038/nnano.2010.23 · Cited by 662
Self-Folding Thermo-Magnetically Responsive Soft Microgrippers
Breger, J. C., Yoon, C., Xiao, R., Kwag, H. R., Wang, M. O., Fisher, J. P., Nguyen, T. D., & Gracias, D. H. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/am508621s · Cited by 655
Cell-laden hydrogels for osteochondral and cartilage tissue engineering
Yang, J., Zhang, Y. S., Yue, K., & Khademhosseini, A. (2017) · Acta Biomaterialia · doi:10.1016/j.actbio.2017.01.036 · Cited by 652
A Tissue-Like Printed Material
Villar, G., Graham, A. D., & Bayley, H. (2013) · Science · doi:10.1126/science.1229495 · Cited by 613
Vegetable-oil-based polymers as future polymeric biomaterials
Miao, S., Wang, P., Su, Z., & Zhang, S. (2014) · Acta Biomaterialia · doi:10.1016/j.actbio.2013.08.040 · Cited by 573
König, I. R., Fuchs, O., Hansen, G., von Mutius, E., & Kopp, M. V. (2017) · European Respiratory Journal · doi:10.1183/13993003.00391-2017 · Cited by 572
Active printed materials for complex self-evolving deformations
Raviv, D., Zhao, W., McKnelly, C., Papadopoulou, A., Kadambi, A., Shi, B., Hirsch, S., Dikovsky, D., Zyracki, M., Olguin, C., et al. (2014) · Scientific Reports · doi:10.1038/srep07422 · Cited by 568
Mechanical properties and shape memory effect of 3D-printed PLA-based porous scaffolds
Senatov, F. S., Niaza, K. V., Zadorozhnyy, M. Y., Maksimkin, A. V., Kaloshkin, S. D., & Estrin, Y. Z. (2016) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2015.11.036 · Cited by 547
3D Bioprinting for Organ Regeneration
Cui, H., Nowicki, M., Fisher, J. P., & Zhang, L. G. (2017) · Advanced Healthcare Materials · doi:10.1002/adhm.201601118 · Cited by 535
4D Printing with Mechanically Robust, Thermally Actuating Hydrogels
Bakarich, S. E., Gorkin, R., Panhuis, M. I. H., & Spinks, G. M. (2015) · Macromolecular Rapid Communications · doi:10.1002/marc.201500079 · Cited by 526
3D Printing of Highly Stretchable, Shape-Memory, and Self-Healing Elastomer toward Novel 4D Printing
Kuang, X., Chen, K., Dunn, C. K., Wu, J., Li, V. C. F., & Qi, H. J. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b18265 · Cited by 523
Wei, H., Zhang, Q., Yao, Y., Liu, L., Liu, Y., & Leng, J. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b12824 · Cited by 504
Self-citationMorrison, R. J., Hollister, S. J., Niedner, M. F., Mahani, M. G., Park, A. H., Mehta, D. K., Ohye, R. G., & Green, G. E. (2015) · Science Translational Medicine · doi:10.1126/scitranslmed.3010825 · Cited by 498
4D Biofabrication Using Shape‐Morphing Hydrogels
Kirillova, A., Maxson, R., Stoychev, G., Gomillion, C. T., & Ionov, L. (2017) · Advanced Materials · doi:10.1002/adma.201703443 · Cited by 494
Magnetic Field-Responsive Smart Polymer Composites
Filipcsei, G., Csetneki, I., Szilágyi, A., & Zrínyi, M. (2007) · Advances in Polymer Science · doi:10.1007/12_2006_104 · Cited by 478
4D printing smart biomedical scaffolds with novel soybean oil epoxidized acrylate
Miao, S., Zhu, W., Castro, N. J., Nowicki, M., Zhou, X., Cui, H., Fisher, J. P., & Zhang, L. G. (2016) · Scientific Reports · doi:10.1038/srep27226 · Cited by 477
Biomaterials for Integration with 3-D Bioprinting
Skardal, A., & Atala, A. (2015) · Annals of Biomedical Engineering · doi:10.1007/s10439-014-1207-1 · Cited by 474
3D Printed Graphene Based Energy Storage Devices
Foster, C. W., Down, M. P., Zhang, Y., Ji, X., Rowley-Neale, S. J., Smith, G. C., Kelly, P. J., & Banks, C. E. (2017) · Scientific Reports · doi:10.1038/srep42233 · Cited by 471
Conducting Polyaniline Nanowire and Its Applications in Chemiresistive Sensing
Song, E., & Choi, J.-W. (2013) · Nanomaterials · doi:10.3390/nano3030498 · Cited by 462
Piezoelectric smart biomaterials for bone and cartilage tissue engineering
Jacob, J., More, N., Kalia, K., & Kapusetti, G. (2018) · Inflammation and Regeneration · doi:10.1186/s41232-018-0059-8 · Cited by 454
Huebsch, N., Kearney, C. J., Zhao, X., Kim, J., Cezar, C. A., Suo, Z., & Mooney, D. J. (2014) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1405469111 · Cited by 453
Forces driving epithelial wound healing
Brugués, A., Anon, E., Conte, V., Veldhuis, J. H., Gupta, M., Colombelli, J., Muñoz, J. J., Brodland, G. W., Ladoux, B., & Trepat, X. (2014) · Nature Physics · doi:10.1038/nphys3040 · Cited by 450
Spatiotemporal hydrogel biomaterials for regenerative medicine
Brown, T. E., & Anseth, K. S. (2017) · Chemical Society Reviews · doi:10.1039/c7cs00445a · Cited by 428
Stimuli-responsive hydrogels in drug delivery and tissue engineering
Sood, N., Bhardwaj, A., Mehta, S., & Mehta, A. (2016) · Drug Delivery · doi:10.3109/10717544.2014.940091 · Cited by 426
Piezoelectric materials as stimulatory biomedical materials and scaffolds for bone repair
Tandon, B., Blaker, J. J., & Cartmell, S. H. (2018) · Acta Biomaterialia · doi:10.1016/j.actbio.2018.04.026 · Cited by 420
4D printing of polymeric materials for tissue and organ regeneration
Miao, S., Castro, N., Nowicki, M., Xia, L., Cui, H., Zhou, X., Zhu, W., Lee, S.-J., Sarkar, K., Vozzi, G., et al. (2017) · Materials Today · doi:10.1016/j.mattod.2017.06.005 · Cited by 408
Cellular Traction Stresses Increase with Increasing Metastatic Potential
Kraning-Rush, C. M., Califano, J. P., & Reinhart-King, C. A. (2012) · PLoS ONE · doi:10.1371/journal.pone.0032572 · Cited by 400
Three-dimensional bioprinting of complex cell laden alginate hydrogel structures
Tabriz, A. G., Hermida, M. A., Leslie, N. R., & Shu, W. (2015) · Biofabrication · doi:10.1088/1758-5090/7/4/045012 · Cited by 393
Biomimetic Materials and Fabrication Approaches for Bone Tissue Engineering
Kim, H. D., Amirthalingam, S., Kim, S. L., Lee, S. S., Rangasamy, J., & Hwang, N. S. (2017) · Advanced Healthcare Materials · doi:10.1002/adhm.201700612 · Cited by 392
pH‐Stimulated DNA Hydrogels Exhibiting Shape‐Memory Properties
Guo, W., Lu, C., Orbach, R., Wang, F., Qi, X., Cecconello, A., Seliktar, D., & Willner, I. (2015) · Advanced Materials · doi:10.1002/adma.201403702 · Cited by 388
Li, Y.-C., Zhang, Y. S., Akpek, A., Shin, S. R., & Khademhosseini, A. (2016) · Biofabrication · doi:10.1088/1758-5090/9/1/012001 · Cited by 385
A bioprintable form of chitosan hydrogel for bone tissue engineering
Demirtaş, T. T., Irmak, G., & Gümüşderelioğlu, M. (2017) · Biofabrication · doi:10.1088/1758-5090/aa7b1d · Cited by 376
Ornamenting 3D printed scaffolds with cell-laid extracellular matrix for bone tissue regeneration
Pati, F., Song, T.-H., Rijal, G., Jang, J., Kim, S. W., & Cho, D.-W. (2015) · Biomaterials · doi:10.1016/j.biomaterials.2014.10.012 · Cited by 361
de Haan, L. T., Verjans, J. M. N., Broer, D. J., Bastiaansen, C. W. M., & Schenning, A. P. H. J. (2014) · Journal of the American Chemical Society · doi:10.1021/ja505475x · Cited by 353
Löwenberg, C., Balk, M., Wischke, C., Behl, M., & Lendlein, A. (2017) · Accounts of Chemical Research · doi:10.1021/acs.accounts.6b00584 · Cited by 335
3D Bioprinting for Cartilage and Osteochondral Tissue Engineering
Daly, A. C., Freeman, F. E., Gonzalez‐Fernandez, T., Critchley, S. E., Nulty, J., & Kelly, D. J. (2017) · Advanced Healthcare Materials · doi:10.1002/adhm.201700298 · Cited by 334
Costantini, M., Testa, S., Mozetic, P., Barbetta, A., Fuoco, C., Fornetti, E., Tamiro, F., Bernardini, S., Jaroszewicz, J., Święszkowski, W., et al. (2017) · Biomaterials · doi:10.1016/j.biomaterials.2017.03.026 · Cited by 330
Luo, R., Wu, J., Dinh, N., & Chen, C. (2015) · Advanced Functional Materials · doi:10.1002/adfm.201503434 · Cited by 306
Wu, S., Zhang, J., Ladani, R. B., Ravindran, A. R., Mouritz, A. P., Kinloch, A. J., & Wang, C. H. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b00847 · Cited by 302
Towards artificial tissue models: past, present, and future of 3D bioprinting
Arslan-Yildiz, A., Assal, R. E., Chen, P., Guven, S., Inci, F., & Demirci, U. (2016) · Biofabrication · doi:10.1088/1758-5090/8/1/014103 · Cited by 301
DNA-directed self-assembly of shape-controlled hydrogels
Qi, H., Ghodousi, M., Du, Y., Grun, C., Bae, H., Yin, P., & Khademhosseini, A. (2013) · Nature Communications · doi:10.1038/ncomms3275 · Cited by 280
4D Printing of Reversible Shape Morphing Hydrogel Structures
Naficy, S., Gately, R., Gorkin, R., Xin, H., & Spinks, G. M. (2017) · Macromolecular Materials and Engineering · doi:10.1002/mame.201600212 · Cited by 276
Scanningless and continuous 3D bioprinting of human tissues with decellularized extracellular matrix
Yu, C., Ma, X., Zhu, W., Wang, P., Miller, K. L., Stupin, J., Koroleva-Maharajh, A., Hairabedian, A., & Chen, S. (2019) · Biomaterials · doi:10.1016/j.biomaterials.2018.12.009 · Cited by 272
Bio‐Origami Hydrogel Scaffolds Composed of Photocrosslinked PEG Bilayers
Jamal, M., Kadam, S. S., Xiao, R., Jivan, F., Onn, T., Fernandes, R., Nguyen, T. D., & Gracias, D. H. (2013) · Advanced Healthcare Materials · doi:10.1002/adhm.201200458 · Cited by 270
Advances and Future Perspectives in 4D Bioprinting
Ashammakhi, N., Ahadian, S., Zengjie, F., Suthiwanich, K., Lorestani, F., Orive, G., Ostrovidov, S., & Khademhosseini, A. (2018) · Biotechnology Journal · doi:10.1002/biot.201800148 · Cited by 270
Conducting polymer-hydrogels for medical electrode applications
Green, R. A., Baek, S., Poole-Warren, L. A., & Martens, P. J. (2010) · Science and Technology of Advanced Materials · doi:10.1088/1468-6996/11/1/014107 · Cited by 268
Multiscale bioprinting of vascularized models
Miri, A. K., Khalilpour, A., Cecen, B., Maharjan, S., Shin, S. R., & Khademhosseini, A. (2019) · Biomaterials · doi:10.1016/j.biomaterials.2018.08.006 · Cited by 267
Magnetic programming of 4D printed shape memory composite structures
Zhang, F., Wang, L., Zheng, Z., Liu, Y., & Leng, J. (2019) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2019.105571 · Cited by 267
Self-citationBagheri, A., Arandiyan, H., Boyer, C., & Lim, M. (2016) · Advanced Science · doi:10.1002/advs.201500437 · Cited by 265
Photodegradable Macromers and Hydrogels for Live Cell Encapsulation and Release
Griffin, D. R., & Kasko, A. M. (2012) · Journal of the American Chemical Society · doi:10.1021/ja305280w · Cited by 264
A Photo‐Crosslinkable Kidney ECM‐Derived Bioink Accelerates Renal Tissue Formation
Ali, M., PR, A. K., Yoo, J. J., Zahran, F., Atala, A., & Lee, S. J. (2019) · Advanced Healthcare Materials · doi:10.1002/adhm.201800992 · Cited by 264
3D Printing of Reduced Graphene Oxide Nanowires
Kim, J. H., Chang, W. S., Kim, D., Yang, J. R., Han, J. T., Lee, G., Kim, J. T., & Seol, S. K. (2015) · Advanced Materials · doi:10.1002/adma.201404380 · Cited by 258
Kuribayashi-Shigetomi, K., Onoe, H., & Takeuchi, S. (2012) · PLoS ONE · doi:10.1371/journal.pone.0051085 · Cited by 255
Kruse, C. R., Singh, M., Targosinski, S., Sinha, I., Sørensen, J. A., Eriksson, E., & Nuutila, K. (2017) · Wound Repair and Regeneration · doi:10.1111/wrr.12526 · Cited by 251
Science in three dimensions: The print revolution
Jones, N. (2012) · Nature · doi:10.1038/487022a · Cited by 249
Thermally induced association and dissociation of methylcellulose in aqueous solutions
Li, L., Shan, H., Yue, C. Y., Lam, Y. C., Tam, K. C., & Hu, X. (2002) · Langmuir · doi:10.1021/la020029b · Cited by 247
Programmed synthesis of three-dimensional tissues
Todhunter, M. E., Jee, N. Y., Hughes, A. J., Coyle, M. C., Cerchiari, A., Farlow, J., Garbe, J. C., LaBarge, M. A., Desai, T. A., & Gartner, Z. J. (2015) · Nature Methods · doi:10.1038/nmeth.3553 · Cited by 247
Zhao, X., Yang, C.-X., Chen, L.-G., & Yan, X.-P. (2017) · Nature Communications · doi:10.1038/ncomms14998 · Cited by 247
Lim, K. S., Klotz, B. J., Lindberg, G. C. J., Melchels, F. P. W., Hooper, G. J., Malda, J., Gawlitta, D., & Woodfield, T. B. F. (2019) · Macromolecular Bioscience · doi:10.1002/mabi.201900098 · Cited by 247
Thermoresponsive polysaccharides and their thermoreversible physical hydrogel networks
Graham, S., Marina, P. F., & Blencowe, A. (2019) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2018.11.053 · Cited by 245
Functional Polymers and Nanocomposites for 3D Printing of Smart Structures and Devices
Nadgorny, M., & Ameli, A. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b01786 · Cited by 244
Advancing Frontiers in Bone Bioprinting
Ashammakhi, N., Hasan, A., Kaarela, O., Byambaa, B., Sheikhi, A., Gaharwar, A. K., & Khademhosseini, A. (2019) · Advanced Healthcare Materials · doi:10.1002/adhm.201801048 · Cited by 244
A review on injectable chitosan/beta glycerophosphate hydrogels for bone tissue regeneration
Saravanan, S., Vimalraj, S., Thanikaivelan, P., Banudevi, S., & Manivasagam, G. (2019) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2018.10.014 · Cited by 239
A Bioactive Carbon Nanotube‐Based Ink for Printing 2D and 3D Flexible Electronics
Shin, S. R., Farzad, R., Tamayol, A., Manoharan, V., Mostafalu, P., Zhang, Y. S., Akbari, M., Jung, S. M., Kim, D., Comotto, M., et al. (2016) · Advanced Materials · doi:10.1002/adma.201506420 · Cited by 236
Three-Dimensional Printing of pH-Responsive and Functional Polymers on an Affordable Desktop Printer
Nadgorny, M., Xiao, Z., Chen, C., & Connal, L. A. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b07388 · Cited by 234
From 3D to 4D printing: Approaches and typical applications
Zhou, Y., Huang, W. M., Kang, S. F., Wu, X. L., Lu, H. B., Fu, J., & Cui, H. (2015) · Journal of Mechanical Science and Technology · doi:10.1007/s12206-015-0925-0 · Cited by 224
Self-citationThe mechanical control of nervous system development
Franze, K. (2013) · Development · doi:10.1242/dev.079145 · Cited by 222
Gonçalves, E. M., Oliveira, F. J., Silva, R. F., Neto, M. A., Fernandes, M. H., Amaral, M., Vallet‐Regí, M., & Vila, M. (2016) · Journal of Biomedical Materials Research Part B: Applied Biomaterials · doi:10.1002/jbm.b.33432 · Cited by 221
Photogated humidity-driven motility
Zhang, L., Liang, H., Jacob, J., & Naumov, P. (2015) · Nature Communications · doi:10.1038/ncomms8429 · Cited by 221
Light-activated communication in synthetic tissues
Booth, M. J., Schild, V. R., Graham, A. D., Olof, S. N., & Bayley, H. (2016) · Science Advances · doi:10.1126/sciadv.1600056 · Cited by 218
PH sensitive N-succinyl chitosan grafted polyacrylamide hydrogel for oral insulin delivery
Mukhopadhyay, P., Sarkar, K., Bhattacharya, S., Bhattacharyya, A., Mishra, R., & Kundu, P. P. (2014) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2014.06.045 · Cited by 217
Zhang, D., George, O. J., Petersen, K. M., Jimenez-Vergara, A. C., Hahn, M. S., & Grunlan, M. A. (2014) · Acta Biomaterialia · doi:10.1016/j.actbio.2014.07.020 · Cited by 217
Fabrication and in vitro biological properties of piezoelectric bioceramics for bone regeneration
Tang, Y., Wu, C., Wu, Z., Hu, L., Zhang, W., & Zhao, K. (2017) · Scientific Reports · doi:10.1038/srep43360 · Cited by 210
Stereolithographic 4D Bioprinting of Multiresponsive Architectures for Neural Engineering
Miao, S., Cui, H., Nowicki, M., Xia, L., Zhou, X., Lee, S., Zhu, W., Sarkar, K., Zhang, Z., & Zhang, L. G. (2018) · Advanced Biosystems · doi:10.1002/adbi.201800101 · Cited by 209
Multicellular Vascularized Engineered Tissues through User‐Programmable Biomaterial Photodegradation
Arakawa, C. K., Badeau, B. A., Zheng, Y., & DeForest, C. A. (2017) · Advanced Materials · doi:10.1002/adma.201703156 · Cited by 200
Wu, J., Zheng, K., Huang, X., Liu, J., Liu, H., Boccaccini, A. R., Wan, Y., Guo, X., & Shao, Z. (2019) · Acta Biomaterialia · doi:10.1016/j.actbio.2019.04.023 · Cited by 199
Suo, H., Zhang, D., Yin, J., Qian, J., Wu, Z. L., & Fu, J. (2018) · Materials Science and Engineering: C · doi:10.1016/j.msec.2018.07.016 · Cited by 190
Miao, S., Zhu, W., Castro, N. J., Leng, J., & Zhang, L. G. (2016) · Tissue Engineering Part C: Methods · doi:10.1089/ten.tec.2015.0542 · Cited by 187
Structural optimization of 3D-printed synthetic spider webs for high strength
Qin, Z., Compton, B. G., Lewis, J. A., & Buehler, M. J. (2015) · Nature Communications · doi:10.1038/ncomms8038 · Cited by 179
Tissue Engineering and Regenerative Medicine: New Trends and Directions—A Year in Review
Gomes, M. E., Rodrigues, M. T., Domingues, R. M. A., & Reis, R. L. (2017) · Tissue Engineering Part B: Reviews · doi:10.1089/ten.teb.2017.0081 · Cited by 179
Liu, X., Zhao, K., Gong, T., Song, J., Bao, C., Luo, E., Weng, J., & Zhou, S. (2014) · Biomacromolecules · doi:10.1021/bm401911p · Cited by 178
Hendrikson, W. J., Rouwkema, J., Clementi, F., van Blitterswijk, C. A., Farè, S., & Moroni, L. (2017) · Biofabrication · doi:10.1088/1758-5090/aa8114 · Cited by 177
Qasim, M., Chae, D. S., & Lee, N. Y. (2019) · International Journal of Nanomedicine · doi:10.2147/ijn.s209431 · Cited by 176
Bouyer, C., Chen, P., Güven, S., Demirtaş, T. T., Nieland, T. J. F., Padilla, F., & Demirci, U. (2016) · Advanced Materials · doi:10.1002/adma.201503916 · Cited by 175
Moreira, C. D. F., Carvalho, S. M., Mansur, H. S., & Pereira, M. M. (2016) · Materials Science and Engineering: C · doi:10.1016/j.msec.2015.09.075 · Cited by 175
Betsch, M., Cristian, C., Lin, Y., Blaeser, A., Schöneberg, J., Vogt, M., Buhl, E. M., Fischer, H., & Duarte Campos, D. F. (2018) · Advanced Healthcare Materials · doi:10.1002/adhm.201800894 · Cited by 173
Qin, Y., Chen, J., Bi, Y., Xu, X., Zhou, H., Gao, J., Hu, Y., Zhao, Y., & Chai, Z. (2015) · Acta Biomaterialia · doi:10.1016/j.actbio.2015.01.026 · Cited by 171
Guided and magnetic self-assembly of tunable magnetoceptive gels
Tasoglu, S., Yu, C. H., Gungordu, H. I., Guven, S., Vural, T., & Demirci, U. (2014) · Nature Communications · doi:10.1038/ncomms5702 · Cited by 168
Acoustic Fabrication via the Assembly and Fusion of Particles
Melde, K., Choi, E., Wu, Z., Palagi, S., Qiu, T., & Fischer, P. (2018) · Advanced Materials · doi:10.1002/adma.201704507 · Cited by 167
Surface acoustic waves induced micropatterning of cells in gelatin methacryloyl (GelMA) hydrogels
Naseer, S. M., Manbachi, A., Samandari, M., Walch, P., Gao, Y., Zhang, Y. S., Davoudi, F., Wang, W., Abrinia, K., Cooper, J. M., et al. (2017) · Biofabrication · doi:10.1088/1758-5090/aa585e · Cited by 166
Graphene‐Based Electroresponsive Scaffolds as Polymeric Implants for On‐Demand Drug Delivery
Servant, A., Leon, V., Jasim, D., Methven, L., Limousin, P., Fernandez‐Pacheco, E. V., Prato, M., & Kostarelos, K. (2014) · Advanced Healthcare Materials · doi:10.1002/adhm.201400016 · Cited by 165
A 3D magnetic tissue stretcher for remote mechanical control of embryonic stem cell differentiation
Du, V., Luciani, N., Richard, S., Mary, G., Gay, C., Mazuel, F., Reffay, M., Menasché, P., Agbulut, O., & Wilhelm, C. (2017) · Nature Communications · doi:10.1038/s41467-017-00543-2 · Cited by 161
Zakharchenko, S., Puretskiy, N., Stoychev, G. V., Stamm, M., & Ionov, L. (2010) · Soft Matter · doi:10.1039/c0sm00088d · Cited by 158
Cui, H., Miao, S., Esworthy, T. J., Lee, S., Zhou, X., Hann, S.-Y., Webster, T. J., Harris, B. T., & Zhang, L. G. (2019) · Nano Research · doi:10.1007/s12274-019-2340-9 · Cited by 156
Continuum model of fibroblast-driven wound contraction: Inflammation-mediation
Tranquillo, R. T., & Murray, J. D. (1992) · Journal of Theoretical Biology · doi:10.1016/s0022-5193(05)80715-5 · Cited by 155
3D-printed bioceramic scaffolds with antibacterial and osteogenic activity
Zhang, Y., Zhai, D., Xu, M., Yao, Q., Zhu, H., Chang, J., & Wu, C. (2017) · Biofabrication · doi:10.1088/1758-5090/aa6ed6 · Cited by 148
Adine, C., Ng, K. K., Rungarunlert, S., Souza, G. R., & Ferreira, J. N. (2018) · Biomaterials · doi:10.1016/j.biomaterials.2018.06.011 · Cited by 145
Moisture-responsive films of cellulose stearoyl esters showing reversible shape transitions
Zhang, K., Geißler, A., Standhardt, M., Mehlhase, S., Gallei, M., Chen, L., & Thiele, C. M. (2015) · Scientific Reports · doi:10.1038/srep11011 · Cited by 144
Humidity-Responsive Bilayer Actuators Based on a Liquid-Crystalline Polymer Network
Dai, M., Picot, O. T., Verjans, J. M. N., de Haan, L. T., Schenning, A. P. H. J., Peijs, T., & Bastiaansen, C. W. M. (2013) · ACS Applied Materials & Interfaces · doi:10.1021/am400681z · Cited by 141
Miao, S., Cui, H., Nowicki, M. A., Lee, S., de Almeida, J. A. A., Zhou, X., Zhu, W., Yao, X., Masood, F., Plesniak, M. W., et al. (2018) · Biofabrication · doi:10.1088/1758-5090/aabe0b · Cited by 141
Luo, Y., Lin, X., Chen, B., & Wei, X. (2019) · Biofabrication · doi:10.1088/1758-5090/ab39c5 · Cited by 138
Lanfer, B., Seib, F. P., Freudenberg, U., Stamov, D. R., Bley, T., Bornhäuser, M., & Werner, C. (2009) · Biomaterials · doi:10.1016/j.biomaterials.2009.07.039 · Cited by 134
Wang, T., Chen, L., Shen, T., & Wu, D. (2016) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2016.09.038 · Cited by 134
Magnetically Guided Self‐Assembly and Coding of 3D Living Architectures
Tocchio, A., Durmus, N. G., Sridhar, K., Mani, V., Coskun, B., Assal, R. E., & Demirci, U. (2017) · Advanced Materials · doi:10.1002/adma.201705034 · Cited by 127
Tunable Pentapeptide Self‐Assembled β‐Sheet Hydrogels
Clarke, D. E., Parmenter, C. D. J., & Scherman, O. A. (2018) · Angewandte Chemie International Edition · doi:10.1002/anie.201801001 · Cited by 127
4D Printing based piezoelectric composite for medical applications
Grinberg, D., Siddique, S., Le, M., et al. (2018) · Journal of Polymer Science Part B Polymer Physics · doi:10.1002/polb.24763 · Cited by 127
Pei, Y., Chen, J., Yang, L., Shi, L., Tao, Q., Hui, B., & Li, J. (2004) · Journal of Biomaterials Science Polymer Edition · doi:10.1163/156856204323046852 · Cited by 125
Baker, R. M., Tseng, L.-F., Iannolo, M. T., Oest, M. E., & Henderson, J. H. (2015) · Biomaterials · doi:10.1016/j.biomaterials.2015.10.064 · Cited by 125
A Thermoresponsive Biodegradable Polymer with Intrinsic Antioxidant Properties
Yang, J. H., van Lith, R., Baler, K., Hoshi, R. A., & Ameer, G. A. (2014) · Biomacromolecules · doi:10.1021/bm5010004 · Cited by 123
Nan, W., Wang, W., Gao, H., & Liu, W. (2013) · Soft Matter · doi:10.1039/c2sm26918j · Cited by 121
Li, C., Wang, K., Zhou, X., Li, T., Xu, Y., Qiang, L., Peng, M., Xu, Y., Xie, L., He, C., et al. (2018) · Biomedical Materials · doi:10.1088/1748-605x/aaf8ed · Cited by 119
Engineering Pre-vascularized Scaffolds for Bone Regeneration
Barabaschi, G. D. G., Manoharan, V., Li, Q., & Bertassoni, L. E. (2015) · Advances in experimental medicine and biology · doi:10.1007/978-3-319-22345-2_5 · Cited by 118
Biocompatible electrically conductive nanofibers from inorganic-organic shape memory polymers
Kai, D., Tan, M. J., Prabhakaran, M. P., Chan, B. Q. Y., Liow, S. S., Ramakrishna, S., & Loh, X. J. (2016) · Colloids and Surfaces B Biointerfaces · doi:10.1016/j.colsurfb.2016.09.035 · Cited by 118
Glycosylated superparamagnetic nanoparticle gradients for osteochondral tissue engineering
Li, C., Armstrong, J. P. K., Pence, I. J., Kit‐Anan, W., Puetzer, J. L., Carreira, S. C., Moore, A. C., & Stevens, M. M. (2018) · Biomaterials · doi:10.1016/j.biomaterials.2018.05.029 · Cited by 118
Huang, B., Vyas, C., Roberts, I. V., Poutrel, Q.-A., Chiang, W., Blaker, J. J., Huang, Z., & Bártolo, P. (2018) · Materials Science and Engineering C · doi:10.1016/j.msec.2018.12.100 · Cited by 118
Chen, C., Zhao, M., Zhang, R., Lu, G., Zhao, C., Fu, F., Sun, H., Zhang, S., Tu, Y., & Li, X. (2017) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.36011 · Cited by 117
Three-dimensional printing of shape memory hydrogels with internal structure for drug delivery
Wang, Y., Miao, Y., Zhang, J., Wu, J., Kirk, T. B., Xu, J., Ma, D., & Xue, W. (2017) · Materials Science and Engineering C · doi:10.1016/j.msec.2017.11.025 · Cited by 116
Tomaskovic‐Crook, E., Zhang, P., Ahtiainen, A., Kaisvuo, H., Lee, C., Beirne, S., Aqrawe, Z., Svirskis, D. M., Hyttinen, J., Wallace, G. G., et al. (2019) · Advanced Healthcare Materials · doi:10.1002/adhm.201900425 · Cited by 114
Self-citationWang, Y. (2018) · Biomaterials · doi:10.1016/j.biomaterials.2018.03.008 · Cited by 114
4D Biofabrication: Materials, Methods, and Applications
Ionov, L. (2018) · Advanced Healthcare Materials · doi:10.1002/adhm.201800412 · Cited by 113
Fast Setting Silk Fibroin Bioink for Bioprinting of Patient‐Specific Memory‐Shape Implants
Costa, J. B., Silva‐Correia, J., Oliveira, J. M., & Reis, R. L. (2017) · Advanced Healthcare Materials · doi:10.1002/adhm.201701021 · Cited by 110
An effective strategy of magnetic stem cell delivery for spinal cord injury therapy
Tukmachev, D., Lunov, O., Zablotskii, V., Dejneka, A., Babič, M., Syková, E., & Kubinová, Š. (2015) · Nanoscale · doi:10.1039/c4nr05791k · Cited by 108
Synthetic and Marine-Derived Porous Scaffolds for Bone Tissue Engineering
Neto, A. S., & Ferreira, J. M. F. (2018) · Materials · doi:10.3390/ma11091702 · Cited by 108
Hsiao, S.-H., & Hsu, S. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b08362 · Cited by 103
Scaffold-free three-dimensional cell culturing using magnetic levitation
Türker, E., Demirçak, N., & Yıldız, A. A. (2018) · Biomaterials Science · doi:10.1039/c8bm00122g · Cited by 102
Magnetic Levitational Assembly for Living Material Fabrication
Taşoğlu, S., Yu, C. H., Liaudanskaya, V., Güven, S., Migliaresi, C., & Demirci, U. (2015) · Advanced Healthcare Materials · doi:10.1002/adhm.201500092 · Cited by 98
4D printing of a self-morphing polymer driven by a swellable guest medium
Su, J., Tao, X., Deng, H., Zhang, C., Jiang, S., Lin, Y., & Lin, J. (2017) · Soft Matter · doi:10.1039/c7sm01796k · Cited by 97
Luo, Z., Zhang, S., Pan, J., Shi, R., Liu, H., Lyu, Y., Han, X. Y., Li, Y., Yang, Y., Xu, Z., et al. (2018) · Biomaterials · doi:10.1016/j.biomaterials.2018.02.025 · Cited by 97
Parfenov, V. A., Koudan, E. V., Bulanova, E. A., Karalkin, P. A., Pereira, F. D. A. S., Norkin, N., Knyazeva, A. D., Gryadunova, A. A., Petrov, O. F., Vasiliev, M. M., et al. (2018) · Biofabrication · doi:10.1088/1758-5090/aac900 · Cited by 95
Kumar, S. A., Alonzo, M., Allen, S. C., Abelseth, L., Thakur, V., Akimoto, J., Ito, Y., Willerth, S. M., Suggs, L. J., Chattopadhyay, M., et al. (2019) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.9b00505 · Cited by 93
Reversible Thermosensitive Biodegradable Polymeric Actuators Based on Confined Crystallization
Stroganov, V., Al‐Hussein, M., Sommer, J., Janke, A., Zakharchenko, S., & Ionov, L. (2015) · Nano Letters · doi:10.1021/nl5045023 · Cited by 92
Current developments in multifunctional smart materials for 3D/4D bioprinting
Castro, N. J., Meinert, C., Levett, P. A., & Hutmacher, D. W. (2017) · Current Opinion in Biomedical Engineering · doi:10.1016/j.cobme.2017.04.002 · Cited by 92
Kim, J., Park, Y., Tae, G., Lee, K. B., Hwang, S. J., Kim, I. S., Noh, I., & Sun, K. (2008) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-008-3469-3 · Cited by 91
Paramagnetic Levitational Assembly of Hydrogels
Taşoğlu, S., Kavaz, D., Gurkan, U. A., Güven, S., Chen, P., Zheng, R., & Demirci, U. (2012) · Advanced Materials · doi:10.1002/adma.201200285 · Cited by 89
Bryant, S. J., & Vernerey, F. J. (2017) · Advanced Healthcare Materials · doi:10.1002/adhm.201700605 · Cited by 86
4D printing of polyurethane paint-based composites
Su, J.-W., Gao, W., Trinh, K., Kenderes, S. M., Tekin Pulatsu, E., Zhang, C., Whittington, A., Lin, M., & Lin, J. (2019) · International Journal of Smart and Nano Materials · doi:10.1080/19475411.2019.1618409 · Cited by 81
Self-Assembly of Metallo-Nucleoside Hydrogels for Injectable Materials That Promote Wound Closure
Tang, Q., Plank, T. N., Zhu, T., Yu, H., Ge, Z., Li, Q., Li, L., Davis, J. T., & Pei, H. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b02265 · Cited by 81
Biodegradable Self‐Folding Polymer Films with Controlled Thermo‐Triggered Folding
Stroganov, V., Zakharchenko, S., Sperling, E., Meyer, A. K., Schmidt, O. G., & Ionov, L. (2014) · Advanced Functional Materials · doi:10.1002/adfm.201400176 · Cited by 78
Advanced 4D-bioprinting technologies for brain tissue modeling and study
Esworthy, T. J., Miao, S., Lee, S., Zhou, X., Cui, H., Zuo, Y. Y., & Zhang, L. G. (2019) · International Journal of Smart and Nano Materials · doi:10.1080/19475411.2019.1631899 · Cited by 78
Bioinspired Multi‐Activities 4D Printing Objects: A New Approach Toward Complex Tissue Engineering
Devillard, C. D., Mandon, C. A., Lambert, S. A., Blum, L. J., & Marquette, C. A. (2018) · Biotechnology Journal · doi:10.1002/biot.201800098 · Cited by 76
4D anisotropic skeletal muscle tissue constructs fabricated by staircase effect strategy
Miao, S., Nowicki, M. A., Cui, H., Lee, S., Zhou, X., Mills, D. K., & Zhang, L. G. (2019) · Biofabrication · doi:10.1088/1758-5090/ab1d07 · Cited by 76
Ren, Z., Zhang, Y., Li, Y., Xu, B., & Liu, W. (2015) · Journal of Materials Chemistry B · doi:10.1039/c5tb00781j · Cited by 75
Sortase A as a cross-linking enzyme in tissue engineering
Broguière, N., Formica, F. A., Barreto, G., & Zenobi‐Wong, M. (2018) · Acta Biomaterialia · doi:10.1016/j.actbio.2018.07.020 · Cited by 75
Li, S., Shu, K., Zhao, C., Wang, C., Guo, Z., Wallace, G. G., & Liu, H. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am503572w · Cited by 74
Adding Biomolecular Recognition Capability to 3D Printed Objects
Mandon, C. A., Blum, L. J., & Marquette, C. A. (2016) · Analytical Chemistry · doi:10.1021/acs.analchem.6b03426 · Cited by 74
Porous Stimuli-Responsive Self-Folding Electrospun Mats for 4D Biofabrication
Apsite, I., Stoychev, G. V., Zhang, W., Jehnichen, D., Xie, J., & Ionov, L. (2017) · Biomacromolecules · doi:10.1021/acs.biomac.7b00829 · Cited by 73
Zhao, C., Zeng, Z., Qazvini, N. T., Yu, X., Zhang, R., Yan, S., Shu, Y., Zhu, Y., Duan, C., Bishop, E. S., et al. (2018) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.8b00179 · Cited by 73
Nafee, N. A., Zewail, M., & Boraie, N. A. (2017) · Journal of drug targeting · doi:10.1080/1061186x.2017.1390670 · Cited by 72
4D biofabrication of skeletal muscle microtissues
Apsite, I., Jaramillo, J. M., Posada‐Murcia, A., Rosenfeldt, S., Salehi, S., & Ionov, L. (2019) · Biofabrication · doi:10.1088/1758-5090/ab4cc4 · Cited by 72
Kashi, M., Baghbani, F., Moztarzadeh, F., Mobasheri, H., & Kowsari, E. (2017) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2017.10.015 · Cited by 71
Magnetically Bioprinted Human Myometrial 3D Cell Rings as A Model for Uterine Contractility
Souza, G. R., Tseng, H., Gage, J. A., Mani, A., Desai, P. K., Leonard, F., Liao, A., Longo, M., Refuerzo, J., & Godin, B. (2017) · International Journal of Molecular Sciences · doi:10.3390/ijms18040683 · Cited by 70
Ren, L., Li, B., Song, Z., Liu, Q., Ren, L., & Zhou, X. (2019) · Composites Part B Engineering · doi:10.1016/j.compositesb.2019.01.061 · Cited by 69
Stimuli-responsive polymers: Fundamental considerations and applications
Gao, Y., Wei, M., Li, X., Xu, W., Ahiabu, A., Perdiz, J. S., Liu, Z., & Serpe, M. J. (2017) · Macromolecular Research · doi:10.1007/s13233-017-5088-7 · Cited by 68
3D Printing/Interfacial Polymerization Coupling for the Fabrication of Conductive Hydrogel
Fantino, E., Roppolo, I., Zhang, D., Xiao, J., Chiappone, A., Castellino, M., Guo, Q., Pirri, C. F., & Yang, J. (2018) · Macromolecular Materials and Engineering · doi:10.1002/mame.201700356 · Cited by 66
dos Santos, B. P., Garbay, B., Fénelon, M., Rosselin, M., Garanger, É., Lecommandoux, S., Oliveira, H., & Amédée, J. (2019) · Acta Biomaterialia · doi:10.1016/j.actbio.2019.08.028 · Cited by 66
Eldin, M. S. M., Kamoun, E. A., Sofan, M. A., & Elbayomi, S. M. (2014) · Arabian Journal of Chemistry · doi:10.1016/j.arabjc.2014.01.007 · Cited by 65
Shape-Memory Effects in Biopolymer Networks with Collagen-Like Transient Nodes
Skrzeszewska, P. J., Jong, L. N., de Wolf, F. A., Stuart, M. A. C., & van der Gucht, J. (2011) · Biomacromolecules · doi:10.1021/bm2003626 · Cited by 64
Borisova, O. V., Billon, L., Richter, R. P., Reimhult, E., & Borisov, O. V. (2015) · Langmuir · doi:10.1021/acs.langmuir.5b01993 · Cited by 61
Yun, W. S., Choi, J. S., Ju, H. M., Kim, M. H., Choi, S. J., Oh, E. S., Seo, Y. J., & Key, J. (2018) · International Journal of Molecular Sciences · doi:10.3390/ijms19051376 · Cited by 60
Bai, T., Han, Y., Zhang, P., Wang, W., & Liu, W. (2012) · Soft Matter · doi:10.1039/c2sm07364a · Cited by 59
Self-citationUnderwood, C. J., Edgar, L. T., Hoying, J. B., & Weiss, J. A. (2014) · American Journal of Physiology-Heart and Circulatory Physiology · doi:10.1152/ajpheart.00995.2013 · Cited by 57
Ahadian, S., Obregón, R., Ramón‐Azcón, J., Salazar, G. T., Shiku, H., Ramalingam, M., & Matsue, T. (2016) · Journal of Nanoscience and Nanotechnology · doi:10.1166/jnn.2016.12729 · Cited by 53
Xu, Y., Han, J., Chai, Y., Yuan, S., Lin, H. R., & Zhang, X. (2017) · Materials Science and Engineering C · doi:10.1016/j.msec.2017.12.032 · Cited by 52
Sun, T., Shi, Q., Huang, Q., Wang, H., Xiong, X., Hu, C., & Fukuda, T. (2017) · Acta Biomaterialia · doi:10.1016/j.actbio.2017.11.038 · Cited by 50
Zhang, F., Zhang, N., Meng, H., Liu, H., Lu, Y.-Q., Liu, C.-M., Zhang, Z.-M., Qu, K.-Y., & Huang, N. (2019) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.9b00515 · Cited by 50
Lalitha, K., Prasad, Y. S., Sridharan, V., Maheswari, C. U., John, G., & Nagarajan, S. (2015) · RSC Advances · doi:10.1039/c5ra14744a · Cited by 49
Wang, D., Zheng, S., Liu, H., Tang, J., Miao, W., Wang, H., Tian, Y., Yang, H., & Jiang, L. (2018) · Advanced Materials · doi:10.1002/adma.201805953 · Cited by 47
Camacho, P., Busari, H., Seims, K. B., Schwarzenberg, P., Dailey, H. L., & Chow, L. W. (2019) · Biomaterials Science · doi:10.1039/c9bm00887j · Cited by 47
Parameswaran-Thankam, A., Parnell, C. M., Watanabe, F., RanguMagar, A. B., Chhetri, B. P., Szwedo, P. K., Biris, A. S., & Ghosh, A. (2018) · ACS Omega · doi:10.1021/acsomega.8b01765 · Cited by 45
Nakayama, M., Lim, W. Q., Kajiyama, S., Kumamoto, A., Ikuhara, Y., Kato, T., & Zhao, Y. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b02485 · Cited by 45
Zhang, Q., Liu, J., Yuan, K., Zhang, Z., Zhang, X., & Fang, X. (2017) · Nanotechnology · doi:10.1088/1361-6528/aa883f · Cited by 43
Scaffolds with shape memory behavior for the treatment of large bone defects
Rychter, P., Pamuła, E., Orchel, A., Posadowska, U., Krok−Borkowicz, M., Kaps, A., Śmigiel-Gac, N., Smola-Dmochowska, A., Kasperczyk, J., Prochwicz, W., et al. (2015) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.35500 · Cited by 42
Synergistic therapy of magnetism-responsive hydrogel for soft tissue injuries
Zhang, L., Zuo, X.-Q., Li, S., Sun, M., Xie, H.-M., Zhang, K., Zhou, J., Che, L., Ma, J., Jia, Z.-S., et al. (2019) · Bioactive Materials · doi:10.1016/j.bioactmat.2019.03.002 · Cited by 40
Vojtová, L., Michlovská, L., Valová, K., Zbončák, M., Trunec, M., Částková, K., Krtička, M., Pavliňáková, V., Poláček, P., Dzurov, M., et al. (2019) · International Journal of Molecular Sciences · doi:10.3390/ijms20020391 · Cited by 39
Wu, L., Virdee, J., Maughan, E. F., Darbyshire, A., Jell, G., Loizidou, M., Emberton, M., Butler, P. E. M., Howkins, A., Reynolds, A. J., et al. (2018) · Acta Biomaterialia · doi:10.1016/j.actbio.2018.09.016 · Cited by 38
Multifunctional Bioinstructive 3D Architectures to Modulate Cellular Behavior
Vaithilingam, J., Sanjuan‐Alberte, P., Campora, S., Rance, G. A., Jiang, L., Thorpe, J., Burroughs, L., Tuck, C. J., Denning, C. N., Wildman, R. D., et al. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201902016 · Cited by 37
Cited by
Printability and shape fidelity of bioinks in 3D bioprinting
Schwab, A., Levato, R., D’Este, M., Piluso, S., Eglin, D., & Malda, J. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00084 · Cited by 1,359
Fabrication of Biomedical Scaffolds Using Biodegradable Polymers.
Kirillova, A., Yeazel, T. R., Asheghali, D., Petersen, S. R., Dort, S., Gall, K., & Becker, M. L. (2021) · Chemical Reviews · doi:10.1021/acs.chemrev.0c01200 · Cited by 368
Askari, M., Afzali Naniz, M., Kouhi, M., Saberi, A., Zolfagharian, A., & Bodaghi, M. (2021) · Biomaterials Science · doi:10.1039/d0bm00973c · Cited by 369
Seoane-Viaño, I., Januskaite, P., Alvarez-Lorenzo, C., Basit, A. W., & Goyanes, A. (2021) · Journal of Controlled Release · doi:10.1016/j.jconrel.2021.02.027 · Cited by 357
Progress in Gelatin as Biomaterial for Tissue Engineering
Lukin, I., Erezuma, I., Maeso, L., Zarate, J., Desimone, M. F., Al-Tel, T. H., Dolatshahi-Pirouz, A., & Orive, G. (2022) · Pharmaceutics · doi:10.3390/pharmaceutics14061177 · Cited by 278
Metadata
- Authors
- Wan, Z., Zhang, P., Liu, Y., Lv, L., & Zhou, Y.
- Venue
- Acta Biomaterialia
- Publisher
- Elsevier BV
- Published
- 2020-01
- Volume
- 101
- Pages
- 26-42
- ISSN
- 1742-7061 (ISSN-L)
- OpenAlex
- W2982343556
- Cited by
- 368
- References
- 207
- FWCI
- 12.60
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.