The DOI matches its Crossref record; 138 of the 138 references it cites were found in a registry or an index.
Engineering of lithium-metal anodes towards a safe and stable battery
Abstract
Abstract Currently, the state-of-the-art lithium-ion batteries (LIBs) are the most widely used energy storage devices and have brought a great impact on our daily life. However, even many strategies have been reported to improve the energy density, these LIBs still can not meet the rapidly growing demand from the many lately emerged devices. During the pursue of higher energy densities, lithium-metal batteries (LMBs) have been the most promising candidates of the next-generation energy storage devices. Unfortunately, the Li-metal anode usually induces severe safety concerns and inferior cycle performance, because of the dendrite growth, high reactivity, and infinite volume changes of Li metal. As a result, these problems limit the commercial application of LMBs and must be resolved prior to the practical deployment of LMBs. In this review, we will firstly discuss the failure mechanisms of Li-metal anodes and introduce latest characterization technologies to study dendritic Li formation. The advances to improve the safety and performance of Li metal anode through electrolyte modification, interfacial engineering, solid-state electrolyte incorporation, and host materials design will then be comprehensively summarized and discussed. Lastly, we will conclude by summarizing the challenges in the current research on LMBs and highlight the future perspectives as well. Through this review, we hope to present the latest developments of the Li metal anode materials for the readers, and also shed light on the possible solutions for the current issues in order to accelerate both fundamental research and practical deployment of the various LMBs.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Electrical energy storage for the grid: A battery of choices
Dunn, B., Kamath, H., & Tarascon, J.-M. (2011) · Science · doi:10.1126/science.1212741 · Cited by 15,072
Li-O2 and Li-S batteries with high energy storage
Bruce, P. G., Freunberger, S. A., Hardwick, L. J., & Tarascon, J.-M. (2012) · Nature Materials · doi:10.1038/nmat3191 · Cited by 9,479
Nonaqueous Liquid Electrolytes for Lithium-Based Rechargeable Batteries
Xu, K. (2004) · Chemical Reviews · doi:10.1021/cr030203g · Cited by 7,437
Reviving the lithium metal anode for high-energy batteries
Lin, D., Liu, Y., & Cui, Y. (2017) · Nature Nanotechnology · doi:10.1038/nnano.2017.16 · Cited by 6,763
Toward Safe Lithium Metal Anode in Rechargeable Batteries: A Review
Cheng, X.-B., Zhang, R., Zhao, C.-Z., & Zhang, Q. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00115 · Cited by 6,197
A lithium superionic conductor
Kamaya, N., Homma, K., Yamakawa, Y., Hirayama, M., Kanno, R., Yonemura, M., Kamiyama, T., Kato, Y., Hama, S., Kawamoto, K., et al. (2011) · Nature Materials · doi:10.1038/nmat3066 · Cited by 4,978
Lithium metal anodes for rechargeable batteries
Xu, W., Wang, J., Ding, F., Chen, X., Nasybulin, E., Zhang, Y., & Zhang, J.-G. (2014) · Energy Environ. Sci. · doi:10.1039/c3ee40795k · Cited by 4,704
Lithium battery chemistries enabled by solid-state electrolytes
Manthiram, A., Yu, X., & Wang, S. (2017) · Nature Reviews Materials · doi:10.1038/natrevmats.2016.103 · Cited by 4,689
A solid future for battery development
Janek, J., & Zeier, W. G. (2016) · Nature Energy · doi:10.1038/nenergy.2016.141 · Cited by 3,979
Peled, E. (1979) · Journal of The Electrochemical Society · doi:10.1149/1.2128859 · Cited by 2,899
Poly(ethylene oxide)-based electrolytes for lithium-ion batteries
Xue, Z., He, D., & Xie, X. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta03471j · Cited by 2,302
Selective deposition and stable encapsulation of lithium through heterogeneous seeded growth
Yan, K., Lu, Z., Lee, H.-W., Xiong, F., Hsu, P.-C., Li, Y., Zhao, J., Chu, S., & Cui, Y. (2016) · Nature Energy · doi:10.1038/nenergy.2016.10 · Cited by 2,116
Dendrite-Free Lithium Deposition via Self-Healing Electrostatic Shield Mechanism
Ding, F., Xu, W., Graff, G. L., Zhang, J., Sushko, M. L., Chen, X., Shao, Y., Engelhard, M. H., Nie, Z., Xiao, J., et al. (2013) · Journal of the American Chemical Society · doi:10.1021/ja312241y · Cited by 2,107
Review on recent progress of nanostructured anode materials for Li-ion batteries
Goriparti, S., Miele, E., De Angelis, F., Di Fabrizio, E., Proietti Zaccaria, R., & Capiglia, C. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.11.103 · Cited by 2,092
Negating interfacial impedance in garnet-based solid-state Li metal batteries
Han, X., Gong, Y., Fu, K., He, X., Hitz, G. T., Dai, J., Pearse, A., Liu, B., Wang, H., Rubloff, G., et al. (2017) · Nature Materials · doi:10.1038/nmat4821 · Cited by 2,025
Zero‐Strain Insertion Material of Li [ Li1 / 3Ti5 / 3 ] O 4 for Rechargeable Lithium Cells
Ohzuku, T., Ueda, A., & Yamamoto, N. (1995) · Journal of The Electrochemical Society · doi:10.1149/1.2048592 · Cited by 1,940
Electrical Energy Storage and Intercalation Chemistry
Whittingham, M. S. (1976) · Science · doi:10.1126/science.192.4244.1126 · Cited by 1,919
Lin, D., Liu, Y., Liang, Z., Lee, H.-W., Sun, J., Wang, H., Yan, K., Xie, J., & Cui, Y. (2016) · Nature Nanotechnology · doi:10.1038/nnano.2016.32 · Cited by 1,798
Fluoroethylene Carbonate Additives to Render Uniform Li Deposits in Lithium Metal Batteries
Zhang, X., Cheng, X., Chen, X., Yan, C., & Zhang, Q. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201605989 · Cited by 1,699
Aurbach, D. (2002) · Solid State Ionics · doi:10.1016/s0167-2738(02)00080-2 · Cited by 1,697
Recent advances in all-solid-state rechargeable lithium batteries
Sun, C., Liu, J., Gong, Y., Wilkinson, D. P., & Zhang, J. (2017) · Nano Energy · doi:10.1016/j.nanoen.2017.01.028 · Cited by 1,688
Electrolytes for solid-state lithium rechargeable batteries: recent advances and perspectives
Quartarone, E., & Mustarelli, P. (2011) · Chemical Society Reviews · doi:10.1039/c0cs00081g · Cited by 1,607
High ionic conductivity in lithium lanthanum titanate
Inaguma, Y., Liquan, C., Itoh, M., Nakamura, T., Uchida, T., Ikuta, H., & Wakihara, M. (1993) · Solid State Communications · doi:10.1016/0038-1098(93)90841-a · Cited by 1,598
Stable lithium electrodeposition in liquid and nanoporous solid electrolytes
Lu, Y., Tu, Z., & Archer, L. A. (2014) · Nature Materials · doi:10.1038/nmat4041 · Cited by 1,592
Atomic structure of sensitive battery materials and interfaces revealed by cryo–electron microscopy
Li, Y., Li, Y., Pei, A., Yan, K., Sun, Y., Wu, C.-L., Joubert, L.-M., Chin, R., Koh, A. L., Yu, Y., et al. (2017) · Science · doi:10.1126/science.aam6014 · Cited by 1,547 · cited 4×
“d) standard SEM image of Li metal dendrites after brief exposure to air, with unobservable facets because of the oxidation/corrosion in air; e) cryo-SEM image of Li metal dendrites, showing the dendrite morphology preserved by the cryo-transfer method.[45]”
BackgroundMethodInfluentialThe synergetic effect of lithium polysulfide and lithium nitrate to prevent lithium dendrite growth
Li, W., Yao, H., Yan, K., Zheng, G., Liang, Z., Chiang, Y.-M., & Cui, Y. (2015) · Nature Communications · doi:10.1038/ncomms8436 · Cited by 1,540
On the Surface Chemical Aspects of Very High Energy Density, Rechargeable Li–Sulfur Batteries
Aurbach, D., Pollak, E., Elazari, R., Salitra, G., Kelley, C. S., & Affinito, J. (2009) · Journal of The Electrochemical Society · doi:10.1149/1.3148721 · Cited by 1,443
Electrochemical aspects of the generation of ramified metallic electrodeposits
Chazalviel, J.-N. (1990) · Physical Review A · doi:10.1103/physreva.42.7355 · Cited by 1,402
Zhang, R., Chen, X., Chen, X., Cheng, X., Zhang, X., Yan, C., & Zhang, Q. (2017) · Angewandte Chemie International Edition · doi:10.1002/anie.201702099 · Cited by 1,225
Reviving Lithium‐Metal Anodes for Next‐Generation High‐Energy Batteries
Guo, Y., Li, H., & Zhai, T. (2017) · Advanced Materials · doi:10.1002/adma.201700007 · Cited by 1,215
Electrode–Electrolyte Interface in Li-Ion Batteries: Current Understanding and New Insights
Gauthier, M., Carney, T. J., Grimaud, A., Giordano, L., Pour, N., Chang, H.-H., Fenning, D. P., Lux, S. F., Paschos, O., Bauer, C., et al. (2015) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.5b01727 · Cited by 1,028
Metallic anodes for next generation secondary batteries
Kim, H., Jeong, G., Kim, Y.-U., Kim, J.-H., Park, C.-M., & Sohn, H.-J. (2013) · Chemical Society Reviews · doi:10.1039/c3cs60177c · Cited by 1,010
Plating a Dendrite-Free Lithium Anode with a Polymer/Ceramic/Polymer Sandwich Electrolyte
Zhou, W., Wang, S., Li, Y., Xin, S., Manthiram, A., & Goodenough, J. B. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.6b05341 · Cited by 1,006
Ionic Conductivity Enhancement of Polymer Electrolytes with Ceramic Nanowire Fillers
Liu, W., Liu, N., Sun, J., Hsu, P.-C., Li, Y., Lee, H.-W., & Cui, Y. (2015) · Nano Letters · doi:10.1021/acs.nanolett.5b00600 · Cited by 1,001
Cheng, X., Hou, T., Zhang, R., Peng, H., Zhao, C., Huang, J., & Zhang, Q. (2016) · Advanced Materials · doi:10.1002/adma.201506124 · Cited by 994
Role of LiNO3 in rechargeable lithium/sulfur battery
Zhang, S. S. (2012) · Electrochimica Acta · doi:10.1016/j.electacta.2012.03.081 · Cited by 947
Dendritic growth mechanisms in lithium/polymer cells
Brissot, C., Rosso, M., Chazalviel, J.-N., & Lascaud, S. (1999) · Journal of Power Sources · doi:10.1016/s0378-7753(98)00242-0 · Cited by 945
Detection of subsurface structures underneath dendrites formed on cycled lithium metal electrodes
Harry, K. J., Hallinan, D. T., Parkinson, D. Y., MacDowell, A. A., & Balsara, N. P. (2014) · Nature Materials · doi:10.1038/nmat3793 · Cited by 868
3D Porous Cu Current Collector/Li‐Metal Composite Anode for Stable Lithium‐Metal Batteries
Li, Q., Zhu, S., & Lu, Y. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201606422 · Cited by 854
Prestoring Lithium into Stable 3D Nickel Foam Host as Dendrite‐Free Lithium Metal Anode
Chi, S., Liu, Y., Song, W., Fan, L., & Zhang, Q. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201700348 · Cited by 846
Zhang, J., Zhao, N., Zhang, M., Li, Y., Chu, P. K.-H., Guo, X., Di, Z., Wang, X., & Li, H. (2016) · Nano Energy · doi:10.1016/j.nanoen.2016.09.002 · Cited by 818
Next-Generation Lithium Metal Anode Engineering via Atomic Layer Deposition
Kozen, A. C., Lin, C.-F., Pearse, A. J., Schroeder, M. A., Han, X., Hu, L., Lee, S.-B., Rubloff, G. W., & Noked, M. (2015) · ACS Nano · doi:10.1021/acsnano.5b02166 · Cited by 816
Chen, R., Qu, W., Guo, X., Li, L., & Wu, F. (2016) · Materials Horizons · doi:10.1039/c6mh00218h · Cited by 797
A review of lithium and non-lithium based solid state batteries
Kim, J. G., Son, B., Mukherjee, S., Schuppert, N., Bates, A., Kwon, O., Choi, M. J., Chung, H. Y., & Park, S. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.02.054 · Cited by 783
Electrochemical in situ investigations of SEI and dendrite formation on the lithium metal anode
Bieker, G., Winter, M., & Bieker, P. (2015) · Physical Chemistry Chemical Physics · doi:10.1039/c4cp05865h · Cited by 777
Aurbach, D., Markovsky, B., Shechter, A., Ein‐Eli, Y., & Cohen, H. (1996) · Journal of The Electrochemical Society · doi:10.1149/1.1837300 · Cited by 760
Protected Lithium‐Metal Anodes in Batteries: From Liquid to Solid
Yang, C., Fu, K., Zhang, Y., Hitz, E., & Hu, L. (2017) · Advanced Materials · doi:10.1002/adma.201701169 · Cited by 757
A review of application of carbon nanotubes for lithium ion battery anode material
de las Casas, C., & Li, W. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.02.013 · Cited by 730
Lu, Q., He, Y., Yu, Q., Li, B., Kaneti, Y. V., Yao, Y., Kang, F., & Yang, Q. (2017) · Advanced Materials · doi:10.1002/adma.201604460 · Cited by 727
A Flexible Solid Electrolyte Interphase Layer for Long‐Life Lithium Metal Anodes
Li, N., Shi, Y., Yin, Y., Zeng, X., Li, J., Li, C., Wan, L., Wen, R., & Guo, Y. (2018) · Angewandte Chemie International Edition · doi:10.1002/anie.201710806 · Cited by 721
Ionic shield for polysulfides towards highly-stable lithium–sulfur batteries
Huang, J.-Q., Zhang, Q., Peng, H.-J., Liu, X.-Y., Qian, W.-Z., & Wei, F. (2014) · Energy Environ. Sci. · doi:10.1039/c3ee42223b · Cited by 679
Artificial Soft–Rigid Protective Layer for Dendrite‐Free Lithium Metal Anode
Xu, R., Zhang, X., Cheng, X., Peng, H., Zhao, C., Yan, C., & Huang, J. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201705838 · Cited by 670
Ultrafine Silver Nanoparticles for Seeded Lithium Deposition toward Stable Lithium Metal Anode
Yang, C., Yao, Y., He, S., Xie, H., Hitz, E., & Hu, L. (2017) · Advanced Materials · doi:10.1002/adma.201702714 · Cited by 661
Beyond lithium ion batteries: Higher energy density battery systems based on lithium metal anodes
Shen, X., Liu, H., Cheng, X.-B., Yan, C., & Huang, J.-Q. (2018) · Energy Storage Materials · doi:10.1016/j.ensm.2017.12.002 · Cited by 653
Identification of Surface Films Formed on Lithium in Propylene Carbonate Solutions
Aurbach, D., Daroux, M. L., Faguy, P. W., & Yeager, E. (1987) · Journal of The Electrochemical Society · doi:10.1149/1.2100722 · Cited by 612
Electrical properties of amorphous lithium electrolyte thin films
BATES, J. (1992) · Solid State Ionics · doi:10.1016/0167-2738(92)90442-r · Cited by 600
Carbon materials for Li–S batteries: Functional evolution and performance improvement
Liang, J., Sun, Z.-H., Li, F., & Cheng, H.-M. (2016) · Energy Storage Materials · doi:10.1016/j.ensm.2015.09.007 · Cited by 593
Self-citationAdvanced Micro/Nanostructures for Lithium Metal Anodes
Zhang, R., Li, N., Cheng, X., Yin, Y., Zhang, Q., & Guo, Y. (2017) · Advanced Science · doi:10.1002/advs.201600445 · Cited by 549
Cheng, L., Crumlin, E. J., Chen, W., Qiao, R., Hou, H., Franz Lux, S., Zorba, V., Russo, R., Kostecki, R., Liu, Z., et al. (2014) · Phys. Chem. Chem. Phys. · doi:10.1039/c4cp02921f · Cited by 545
Polymer Nanofiber-Guided Uniform Lithium Deposition for Battery Electrodes
Liang, Z., Zheng, G., Liu, C., Liu, N., Li, W., Yan, K., Yao, H., Hsu, P.-C., Chu, S., & Cui, Y. (2015) · Nano Letters · doi:10.1021/nl5046318 · Cited by 540
Chai, J., Liu, Z., Ma, J., Wang, J., Liu, X., Liu, H., Zhang, J., Cui, G., & Chen, L. (2017) · Advanced Science · doi:10.1002/advs.201600377 · Cited by 538
Lithium batteries: To the limits of lithium
Evarts, E. C. (2015) · Nature · doi:10.1038/526s93a · Cited by 501
Qi, Y., Guo, H., Hector, L. G., & Timmons, A. (2010) · Journal of The Electrochemical Society · doi:10.1149/1.3327913 · Cited by 491
Stable Li Metal Anodes via Regulating Lithium Plating/Stripping in Vertically Aligned Microchannels
Wang, S., Yin, Y., Zuo, T., Dong, W., Li, J., Shi, J., Zhang, C., Li, N., Li, C., & Guo, Y. (2017) · Advanced Materials · doi:10.1002/adma.201703729 · Cited by 484
Artificial Protection Film on Lithium Metal Anode toward Long‐Cycle‐Life Lithium–Oxygen Batteries
Liu, Q., Xu, J., Yuan, S., Chang, Z., Xu, D., Yin, Y., Li, L., Zhong, H., Jiang, Y., Yan, J., et al. (2015) · Advanced Materials · doi:10.1002/adma.201501490 · Cited by 482
Ryou, M., Lee, D. J., Lee, J., Lee, Y. M., Park, J., & Choi, J. W. (2012) · Advanced Energy Materials · doi:10.1002/aenm.201100687 · Cited by 473
Aurbach, D., Ein‐Eli, Y., Markovsky, B., Zaban, A., Luski, S., Carmeli, Y., & Yamin, H. (1995) · Journal of The Electrochemical Society · doi:10.1149/1.2048659 · Cited by 454
Hu, Y.-S. (2016) · Nature Energy · doi:10.1038/nenergy.2016.42 · Cited by 440
Superionic conductivity of glass-ceramics in the system Li 2 O- Al 2 O 3 -TiO 2 -P 2 O 5
Fu, J. (1997) · Solid State Ionics · doi:10.1016/s0167-2738(97)00018-0 · Cited by 420
Wang, C., Yang, Y., Liu, X., Zhong, H., Xu, H., Xu, Z., Shao, H., & Ding, F. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b00336 · Cited by 419
Cheng, X.-B., Yan, C., Huang, J.-Q., Li, P., Zhu, L., Zhao, L., Zhang, Y., Zhu, W., Yang, S.-T., & Zhang, Q. (2017) · Energy Storage Materials · doi:10.1016/j.ensm.2016.09.003 · Cited by 394
Xiong, S., Xie, K., Diao, Y., & Hong, X. (2012) · Electrochimica Acta · doi:10.1016/j.electacta.2012.07.118 · Cited by 371
Cohen, Y. S., Cohen, Y., & Aurbach, D. (2000) · The Journal of Physical Chemistry B · doi:10.1021/jp002526b · Cited by 360
Effects of Some Organic Additives on Lithium Deposition in Propylene Carbonate
Mogi, R., Inaba, M., Jeong, S.-K., Iriyama, Y., Abe, T., & Ogumi, Z. (2002) · Journal of The Electrochemical Society · doi:10.1149/1.1516770 · Cited by 360
Zhao, Y., Li, X., Yan, B., Li, D., Lawes, S., & Sun, X. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.10.008 · Cited by 356
Kazyak, E., Wood, K. N., & Dasgupta, N. P. (2015) · Chemistry of Materials · doi:10.1021/acs.chemmater.5b02789 · Cited by 356
Recent progress in solid oxide and lithium ion conducting electrolytes research
Thangadurai, V., & Weppner, W. (2006) · Ionics · doi:10.1007/s11581-006-0013-7 · Cited by 353
Shim, J., Kim, H. J., Kim, B. G., Kim, Y. S., Kim, D.-G., & Lee, J.-C. (2017) · Energy & Environmental Science · doi:10.1039/c7ee01095h · Cited by 351
Crumpled Graphene Balls Stabilized Dendrite-free Lithium Metal Anodes
Liu, S., Wang, A., Li, Q., Wu, J., Chiou, K., Huang, J., & Luo, J. (2018) · Joule · doi:10.1016/j.joule.2017.11.004 · Cited by 347
Recent Developments of the Lithium Metal Anode for Rechargeable Non‐Aqueous Batteries
Zhang, K., Lee, G., Park, M., Li, W., & Kang, Y. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201600811 · Cited by 345
Regulating Li deposition at artificial solid electrolyte interphases
Fan, L., Zhuang, H. L., Gao, L., Lu, Y., & Archer, L. A. (2017) · Journal of Materials Chemistry A · doi:10.1039/c6ta10204b · Cited by 327
Aurbach, D., Gofer, Y., & Langzam, J. (1989) · Journal of The Electrochemical Society · doi:10.1149/1.2096425 · Cited by 313
Orsini, F., Du Pasquier, A., Beaudoin, B., Tarascon, J. M., Trentin, M., Langenhuizen, N., De Beer, E., & Notten, P. (1998) · Journal of Power Sources · doi:10.1016/s0378-7753(98)00128-1 · Cited by 310 · cited 1×
“To solve this issue, advanced characterization methods have been recently exploited, such as using a special system, which allowed the transfer of the unpackaged battery components from a glove box into the scanning electron microscopy (SEM) without exposure to ambient environments;[39, 40] directly observing the morp…”
MethodElectrochemical behaviors of a Li3N modified Li metal electrode in secondary lithium batteries
Wu, M., Wen, Z., Liu, Y., Wang, X., & Huang, L. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.05.035 · Cited by 298
Gao, Y., Zhao, Y., Li, Y. C., Huang, Q., Mallouk, T. E., & Wang, D. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.7b06437 · Cited by 297
TARASCON, J., & GUYOMARD, D. (1994) · Solid State Ionics · doi:10.1016/0167-2738(94)90418-9 · Cited by 291
Ion–Solvent Complexes Promote Gas Evolution from Electrolytes on a Sodium Metal Anode
Chen, X., Shen, X., Li, B., Peng, H., Cheng, X., Li, B., Zhang, X., Huang, J., & Zhang, Q. (2018) · Angewandte Chemie International Edition · doi:10.1002/anie.201711552 · Cited by 287
Aurbach, D., Zaban, A., Gofer, Y., Ely, Y. E., Weissman, I., Chusid, O., & Abramson, O. (1995) · Journal of Power Sources · doi:10.1016/0378-7753(94)02044-4 · Cited by 262
Li 2 S 5 -based ternary-salt electrolyte for robust lithium metal anode
Zhao, C.-Z., Cheng, X.-B., Zhang, R., Peng, H.-J., Huang, J.-Q., Ran, R., Huang, Z.-H., Wei, F., & Zhang, Q. (2016) · Energy Storage Materials · doi:10.1016/j.ensm.2016.01.007 · Cited by 260
Cussen, E. J. (2006) · Chem. Commun. · doi:10.1039/b514640b · Cited by 257
Lithium Electrode Morphology during Cycling in Lithium Cells
Yoshimatsu, I., Hirai, T., & Yamaki, J. (1988) · Journal of The Electrochemical Society · doi:10.1149/1.2095351 · Cited by 257
Sulfurized solid electrolyte interphases with a rapid Li+ diffusion on dendrite-free Li metal anodes
Cheng, X.-B., Yan, C., Peng, H.-J., Huang, J.-Q., Yang, S.-T., & Zhang, Q. (2018) · Energy Storage Materials · doi:10.1016/j.ensm.2017.03.008 · Cited by 257
Zhang, L., Ling, M., Feng, J., Mai, L., Liu, G., & Guo, J. (2018) · Energy Storage Materials · doi:10.1016/j.ensm.2017.09.001 · Cited by 251
An Advanced Tool for the Selection of Electrolyte Components for Rechargeable Lithium Batteries
Peled, E., Golodnitsky, D., Menachem, C., & Bar‐Tow, D. (1998) · Journal of The Electrochemical Society · doi:10.1149/1.1838831 · Cited by 249
Wang, H., Lin, D., Liu, Y., Li, Y., & Cui, Y. (2017) · Science Advances · doi:10.1126/sciadv.1701301 · Cited by 244
Long lifespan lithium metal anodes enabled by Al2O3 sputter coating
Wang, L., Zhang, L., Wang, Q., Li, W., Wu, B., Jia, W., Wang, Y., Li, J., & Li, H. (2018) · Energy Storage Materials · doi:10.1016/j.ensm.2017.08.001 · Cited by 229
Self-citationSacci, R. L., Black, J. M., Balke, N., Dudney, N. J., More, K. L., & Unocic, R. R. (2015) · Nano Letters · doi:10.1021/nl5048626 · Cited by 227
Stability Analysis of Electrodeposition across a Structured Electrolyte with Immobilized Anions
Tikekar, M. D., Archer, L. A., & Koch, D. L. (2014) · Journal of The Electrochemical Society · doi:10.1149/2.085405jes · Cited by 226
Chen, X., Hou, T.-Z., Li, B., Yan, C., Zhu, L., Guan, C., Cheng, X.-B., Peng, H.-J., Huang, J.-Q., & Zhang, Q. (2017) · Energy Storage Materials · doi:10.1016/j.ensm.2017.01.003 · Cited by 216
Shin, B. R., Nam, Y. J., Oh, D. Y., Kim, D. H., Kim, J. W., & Jung, Y. S. (2014) · Electrochimica Acta · doi:10.1016/j.electacta.2014.08.139 · Cited by 214
Ye, H., Yin, Y.-X., Zhang, S.-F., Shi, Y., Liu, L., Zeng, X.-X., Wen, R., Guo, Y.-G., & Wan, L.-J. (2017) · Nano Energy · doi:10.1016/j.nanoen.2017.04.056 · Cited by 205
Besenhard, J. O., Wagner, M. W., Winter, M., Jannakoudakis, A. D., Jannakoudakis, P. D., & Theodoridou, E. (1993) · Journal of Power Sources · doi:10.1016/0378-7753(93)80183-p · Cited by 179
Lu, L.-L., Zhang, Y., Pan, Z., Yao, H.-B., Zhou, F., & Yu, S.-H. (2017) · Energy Storage Materials · doi:10.1016/j.ensm.2017.06.004 · Cited by 170
Honeycomb-like porous 3D nickel electrodeposition for stable Li and Na metal anodes
Xu, Y., Menon, A. S., Harks, P. P. R. M. L., Hermes, D. C., Haverkate, L. A., Unnikrishnan, S., & Mulder, F. M. (2018) · Energy Storage Materials · doi:10.1016/j.ensm.2017.11.011 · Cited by 168
Xiong, S., Xie, K., Diao, Y., & Hong, X. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.02.072 · Cited by 160
Morigaki, K.-I., & Ohta, A. (1998) · Journal of Power Sources · doi:10.1016/s0378-7753(98)00151-7 · Cited by 160
Three-dimensional pie-like current collectors for dendrite-free lithium metal anodes
Yan, K., Sun, B., Munroe, P. R., & Wang, G. (2017) · Energy storage materials · doi:10.1016/j.ensm.2017.10.012 · Cited by 144
ZnO/carbon framework derived from metal-organic frameworks as a stable host for lithium metal anodes
Wang, L., Zhu, X., Guan, Y., Zhang, J., Ai, F., Zhang, W., Yu, X., Srinivasapriyan, V., Li, G., Huang, Y., et al. (2017) · Energy storage materials · doi:10.1016/j.ensm.2017.10.016 · Cited by 143
Self-citationGao, Y., Yi, R., Li, Y., Song, J., Chen, S., Huang, Q., Mallouk, T. E., & Wang, D. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.7b07584 · Cited by 139
Mixed solvent electrolyte for high voltage lithium metal secondary cells
Hayashi, K., Nemoto, Y., Tobishima, S., & Yamaki, J. (1999) · Electrochimica Acta · doi:10.1016/s0013-4686(98)00374-0 · Cited by 136
Hu, J., Tian, J., & Li, C. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b00478 · Cited by 131
Lithium Metal Anodes and Rechargeable Lithium Metal Batteries
Zhang, J.-G., Xu, W., & Henderson, W. A. (2017) · Springer Series in Materials Science · doi:10.1007/978-3-319-44054-5 · Cited by 119
Ota, H., Sakata, Y., Wang, X.-M., Sasahara, J., & Yasukawa, E. (2004) · Journal of The Electrochemical Society · doi:10.1149/1.1644137 · Cited by 118
Lin, Z., Guo, X., & Yu, H. (2017) · Nano Energy · doi:10.1016/j.nanoen.2017.10.021 · Cited by 116
Goujon, L. J., Khaldi, A., Maziz, A., Plesse, C., Nguyen, G. T. M., Aubert, P., Vidal, F., Chevrot, C., & Teyssié, D. (2011) · Macromolecules · doi:10.1021/ma201662h · Cited by 110
Kim, H., Oh, Y., Kang, K. H., Kim, J. H., Kim, J., & Yoon, C. S. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b15305 · Cited by 109
Review of nanostructured current collectors in lithium–sulfur batteries
Kong, L., Peng, H., Huang, J., & Zhang, Q. (2017) · Nano Research · doi:10.1007/s12274-017-1652-x · Cited by 104
Matsuda, S., Kubo, Y., Uosaki, K., & Nakanishi, S. (2017) · ACS Energy Letters · doi:10.1021/acsenergylett.7b00149 · Cited by 102
Kim, D.-G., Shim, J., Lee, J. H., Kwon, S.-J., Baik, J.-H., & Lee, J.-C. (2013) · Polymer · doi:10.1016/j.polymer.2013.08.049 · Cited by 100
Ōsaka, T., Momma, T., Matsumoto, Y., & Uchida, Y. (1997) · Journal of The Electrochemical Society · doi:10.1149/1.1837665 · Cited by 96
Aurbach, D., Gnanaraj, J., Geißler, W., & Schmidt, M. (2003) · Journal of The Electrochemical Society · doi:10.1149/1.1631820 · Cited by 95
Ethylmethylcarbonate, a Promising Solvent for Li‐Ion Rechargeable Batteries
Ein‐Eli, Y., Thomas, S. R., Koch, V., Aurbach, D., Markovsky, B., & Schechter, A. (1996) · Journal of The Electrochemical Society · doi:10.1149/1.1837293 · Cited by 92 · cited 1×
“(EMC), etc.[64-66] Among these choices, ethylene and dimethyl carbonates (EC-DMC) have shown the greatest potential to be used in the LMBs.”
BackgroundLithium fiber growth on the anode in a nanowire lithium ion battery during charging
Liu, X. H., Zhong, L. S., Zhang, L., Kushima, A., Mao, S. X., Li, J., Ye, Z. Z., Sullivan, J. P., & Huang, J. Y. (2011) · Applied Physics Letters · doi:10.1063/1.3585655 · Cited by 90
New battery strategies with a polymer/Al2O3 separator
Park, K., Cho, J. H., Shanmuganathan, K., Song, J., Peng, J., Gobet, M. P., Greenbaum, S., Ellison, C. J., & Goodenough, J. B. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.04.017 · Cited by 86
Ihlefeld, J. F., Clem, P. G., Doyle, B. L., Kotula, P. G., Fenton, K., & Apblett, C. A. (2011) · Advanced Materials · doi:10.1002/adma.201102980 · Cited by 83
Real-time observation of lithium fibers growth inside a nanoscale lithium-ion battery
Ghassemi, H., Au, M., Chen, N., Heiden, P. A., & Yassar, R. S. (2011) · Applied Physics Letters · doi:10.1063/1.3643035 · Cited by 83
K+Reduces Lithium Dendrite Growth by Forming a Thin, Less-Resistive Solid Electrolyte Interphase
Wood, S. M., Pham, C. H., Rodríguez, R., Nathan, S. S., Dolocan, A., Celio, H., de Souza, J. P., Klavetter, K. C., Heller, A., & Mullins, C. B. (2016) · ACS Energy Letters · doi:10.1021/acsenergylett.6b00259 · Cited by 80
Lin, C., Kozen, A. C., Noked, M., Liu, C., & Rubloff, G. W. (2016) · Advanced Materials Interfaces · doi:10.1002/admi.201600426 · Cited by 76
Lang, J., Song, J., Qi, L., Luo, Y., Luo, X., & Wu, H. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b00181 · Cited by 68
Electrochemical performance of Al–Si–graphite composite as anode for lithium–ion batteries
Zhou, W., Upreti, S., & Whittingham, M. S. (2010) · Electrochemistry Communications · doi:10.1016/j.elecom.2010.12.001 · Cited by 64
Lang, J., Jin, Y., Luo, X., Liu, Z., Song, J., Long, Y., Qi, L., Fang, M., Li, Z., & Wu, H. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta05997c · Cited by 60
Lithium surface protection by polyacetylene in situ polymerization
Belov, D. G., Yarmolenko, O. V., Peng, A., & Efimov, O. N. (2006) · Synthetic Metals · doi:10.1016/j.synthmet.2006.04.006 · Cited by 52
Ye, Y., Wang, L., Guan, L., Wu, F., Qian, J., Zhao, T., Zhang, X., Xing, Y., Shi, J., Li, L., et al. (2017) · Energy storage materials · doi:10.1016/j.ensm.2017.07.004 · Cited by 52
Self-citationDendrite-Free Lithium Deposition for Lithium Metal Anodes with Interconnected Microsphere Protection
Lee, Y.-G., Ryu, S., Sugimoto, T., Yu, T.-H., Chang, W.-S., Yang, Y., Jung, C., Woo, J., Kang, S. G., Han, H. N., et al. (2017) · Chemistry of Materials · doi:10.1021/acs.chemmater.7b01304 · Cited by 50
Novel Surface Coating Strategies for Better Battery Materials
Wen, L., Wang, X., Liu, G., Luo, H., Liang, J., & Dou, S. X. (2017) · Surface Innovations · doi:10.1680/jsuin.17.00056 · Cited by 37
Self-citationAnalysis of the interface between lithium and organic electrolyte solution
Morigaki, K. (2002) · Journal of Power Sources · doi:10.1016/s0378-7753(01)00871-0 · Cited by 34
Zhou, H.-M., Fang, Z., & Li, J. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.11.060 · Cited by 33
Hu, J. Z., Zhao, Z., Hu, M. Y., Feng, J., Deng, X., Chen, X., Xu, W., Liu, J., & Zhang, J. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.10.067 · Cited by 29
Cited by
Lithium–Oxygen Batteries and Related Systems: Potential, Status, and Future
Kwak, W.-J., Rosy, Sharon, D., Xia, C., Kim, H., Johnson, L. R., Bruce, P. G., Nazar, L. F., Sun, Y.-K., Frimer, A. A., et al. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00609 · Cited by 1,009
Strategies for the Stabilization of Zn Metal Anodes for Zn‐Ion Batteries
Yi, Z., Chen, G., Hou, F., Wang, L., & Liang, J. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202003065 · Cited by 942
Self-citationArtificial Interphases for Highly Stable Lithium Metal Anode
Xu, R., Cheng, X.-B., Yan, C., Zhang, X.-Q., Xiao, Y., Zhao, C.-Z., Huang, J.-Q., & Zhang, Q. (2019) · Matter · doi:10.1016/j.matt.2019.05.016 · Cited by 721
Current Status and Future Prospects of Metal–Sulfur Batteries
Chung, S., & Manthiram, A. (2019) · Advanced Materials · doi:10.1002/adma.201901125 · Cited by 622
Confronting the Challenges in Lithium Anodes for Lithium Metal Batteries
Wang, Q., Liu, B., Shen, Y., Wu, J., Zhao, Z., Zhong, C., & Hu, W. (2021) · Advanced Science · doi:10.1002/advs.202101111 · Cited by 531
Metadata
- Authors
- Wang, L., Zhou, Z., Yan, X., Hou, F., Wen, L., Luo, W., Liang, J., & Dou, S. X.
- Venue
- Energy Storage Materials
- Publisher
- Elsevier BV
- Published
- 2018-09
- Volume
- 14
- Pages
- 22-48
- ISSN
- 2405-8289 (ISSN-L)
- 2405-8297
- OpenAlex
- W2789359517
- Cited by
- 270
- References
- 138
- FWCI
- 14.68
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.