The DOI matches its Crossref record; 152 of the 152 references it cites were found in a registry or an index.
4D printing: Fundamentals, materials, applications and challenges
Open accessAbstract
4D printing refers to single-material or multi-material printing of a device or object that can be transformed from a 1D strand into pre-programed 3D shape, from a 2D surface into preprogramed 3D shape and is capable of morphing between different dimensions. Such transformations are facilitated by, e.g., heating, light, or swelling in a liquid, electrochemically and by programming different sensitivity to, e.g., swelling into various parts of the designed geometry. These techniques offer adaptability and dynamic response for structures and systems of all sizes, and promises new possibilities for embedding programmability and simple decision making into non-electronic based materials. Potential applications include; robotics-like behavior without the reliance on complex electro-mechanical-chemical devices as well as adaptive products, garments or mechanisms that respond to user-demands and fluctuating environments. In this paper, we have discussed fundamentals and laws governing 4D printing, materials that are employed in 4D printing along with applications such as soft robotics and challenges that need to be overcome for 4D printing to evolve as a mainstream manufacturing technology.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Bioinspired structural materials
Wegst, U. G. K., Bai, H., Saiz, E., Tomsia, A. P., & Ritchie, R. O. (2015) · Nature Materials · doi:10.1038/nmat4089 · Cited by 4,721
Autonomic healing of polymer composites
White, S. R., Sottos, N. R., Geubelle, P. H., Moore, J. S., Kessler, M. R., Sriram, S. R., Brown, E. N., & Viswanathan, S. (2001) · Nature · doi:10.1038/35057232 · Cited by 4,575
Double‐Network Hydrogels with Extremely High Mechanical Strength
Gong, J. P., Katsuyama, Y., Kurokawa, T., & Osada, Y. (2003) · Advanced Materials · doi:10.1002/adma.200304907 · Cited by 4,542
Hydrogels in Biology and Medicine: From Molecular Principles to Bionanotechnology
Peppas, N. A., Hilt, J. Z., Khademhosseini, A., & Langer, R. (2006) · Advanced Materials · doi:10.1002/adma.200501612 · Cited by 4,109
Gibson, I., Rosen, D., & Stucker, B. (2015) · doi:10.1007/978-1-4939-2113-3 · Cited by 3,299
Sydney Gladman, A., Matsumoto, E. A., Nuzzo, R. G., Mahadevan, L., & Lewis, J. A. (2016) · Nature Materials · doi:10.1038/nmat4544 · Cited by 3,027
Thermo- and pH-responsive polymers in drug delivery☆
SCHMALJOHANN, D. (2006) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2006.09.020 · Cited by 3,023
Self-healing and thermoreversible rubber from supramolecular assembly
Cordier, P., Tournilhac, F., Soulié-Ziakovic, C., & Leibler, L. (2008) · Nature · doi:10.1038/nature06669 · Cited by 2,984
Additive Manufacturing Technologies: Rapid Prototyping to Direct Digital Manufacturing
Gibson, I., Rosen, D. W., & Stucker, B. (2010) · National University of Singapore · doi:10.1007/978-1-4419-1120-9 · Cited by 2,969
A Thermally Re-mendable Cross-Linked Polymeric Material
Chen, X., Dam, M. A., Ono, K., Mal, A., Shen, H., Nutt, S. R., Sheran, K., & Wudl, F. (2002) · Science · doi:10.1126/science.1065879 · Cited by 2,645
The status, challenges, and future of additive manufacturing in engineering
Gao, W., Zhang, Y., Ramanujan, D., Ramani, K., Chen, Y., Williams, C. B., Wang, C. C. L., Shin, Y. C., Zhang, S., & Zavattieri, P. D. (2015) · Computer-Aided Design · doi:10.1016/j.cad.2015.04.001 · Cited by 2,631
A 3D bioprinting system to produce human-scale tissue constructs with structural integrity
Kang, H.-W., Lee, S. J., Ko, I. K., Kengla, C., Yoo, J. J., & Atala, A. (2016) · Nature Biotechnology · doi:10.1038/nbt.3413 · Cited by 2,622
Stimuli-reponsive polymers and their bioconjugates
GIL, E., & HUDSON, S. (2004) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2004.08.003 · Cited by 2,385
Additive manufacturing: scientific and technological challenges, market uptake and opportunities
Tofail, S. A. M., Koumoulos, E. P., Bandyopadhyay, A., Bose, S., O’Donoghue, L., & Charitidis, C. (2018) · Materials Today · doi:10.1016/j.mattod.2017.07.001 · Cited by 2,136
3D‐Printing of Lightweight Cellular Composites
Compton, B. G., & Lewis, J. A. (2014) · Advanced Materials · doi:10.1002/adma.201401804 · Cited by 1,626
The footprint of urban heat island effect in China
Zhou, D., Zhao, S., Zhang, L., Sun, G., & Liu, Y. (2015) · Scientific Reports · doi:10.1038/srep11160 · Cited by 1,621
Zhao, Q., Qi, H. J., & Xie, T. (2015) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2015.04.001 · Cited by 1,409
High-performance vitrimers from commodity thermoplastics through dioxaborolane metathesis
Röttger, M., Domenech, T., van der Weegen, R., Breuillac, A., Nicolaÿ, R., & Leibler, L. (2017) · Science · doi:10.1126/science.aah5281 · Cited by 1,394
Tunable polymer multi-shape memory effect
Xie, T. (2010) · Nature · doi:10.1038/nature08863 · Cited by 1,380
A review on additive manufacturing of polymer-fiber composites
Parandoush, P., & Lin, D. (2017) · Composite Structures · doi:10.1016/j.compstruct.2017.08.088 · Cited by 1,270
Additive manufacturing of tissues and organs
Melchels, F. P. W., Domingos, M. A. N., Klein, T. J., Malda, J., Bartolo, P. J., & Hutmacher, D. W. (2012) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2011.11.007 · Cited by 1,213
Momeni, F., M.Mehdi Hassani.N, S., Liu, X., & Ni, J. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.02.068 · Cited by 1,165
Multimaterial 4D Printing with Tailorable Shape Memory Polymers
Ge, Q., Sakhaei, A. H., Lee, H., Dunn, C. K., Fang, N. X., & Dunn, M. L. (2016) · Scientific Reports · doi:10.1038/srep31110 · Cited by 1,160
Advances in 4D Printing: Materials and Applications
Kuang, X., Roach, D. J., Wu, J., Hamel, C. M., Ding, Z., Wang, T., Dunn, M. L., & Qi, H. J. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201805290 · Cited by 1,095
Recent advances and challenges in designing stimuli-responsive polymers
Liu, F., & Urban, M. W. (2010) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2009.10.002 · Cited by 1,003
Shape memory polymers: Past, present and future developments
Hager, M. D., Bode, S., Weber, C., & Schubert, U. S. (2015) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2015.04.002 · Cited by 950
3D printing of smart materials: A review on recent progresses in 4D printing
Khoo, Z. X., Teoh, J. E. M., Liu, Y., Chua, C. K., Yang, S., An, J., Leong, K. F., & Yeong, W. Y. (2015) · Virtual and Physical Prototyping · doi:10.1080/17452759.2015.1097054 · Cited by 912
3D Printing of Shape Memory Polymers for Flexible Electronic Devices
Zarek, M., Layani, M., Cooperstein, I., Sachyani, E., Cohn, D., & Magdassi, S. (2016) · Advanced Materials · doi:10.1002/adma.201503132 · Cited by 903
Ray, U., & Das, S. (2011) · Scientific Reports · doi:10.1038/srep00001 · Cited by 884
Projection micro-stereolithography using digital micro-mirror dynamic mask
Sun, C., Fang, N., Wu, D. M., & Zhang, X. (2005) · Sensors and Actuators A: Physical · doi:10.1016/j.sna.2004.12.011 · Cited by 880
25th Anniversary Article: A Soft Future: From Robots and Sensor Skin to Energy Harvesters
Bauer, S., Bauer‐Gogonea, S., Graz, I., Kaltenbrunner, M., Keplinger, C., & Schwödiauer, R. (2014) · Advanced Materials · doi:10.1002/adma.201303349 · Cited by 860
Lessons from nature: stimuli-responsive polymers and their biomedical applications
Jeong, B., & Gutowska, A. (2002) · Trends in Biotechnology · doi:10.1016/s0167-7799(02)01962-5 · Cited by 856
Active materials by four-dimension printing
Ge, Q., Qi, H. J., & Dunn, M. L. (2013) · Applied Physics Letters · doi:10.1063/1.4819837 · Cited by 785
3D printing of liquid crystal elastomeric actuators with spatially programed nematic order
Kotikian, A., Truby, R. L., Boley, J. W., White, T. J., & Lewis, J. A. (2018) · Advanced Materials · doi:10.1002/adma.201706164 · Cited by 768
Huang, W. M., Ding, Z., Wang, C. C., Wei, J., Zhao, Y., & Purnawali, H. (2010) · Materials Today · doi:10.1016/s1369-7021(10)70128-0 · Cited by 747
4D Bioprinting for Biomedical Applications
Gao, B., Yang, Q., Zhao, X., Jin, G., Ma, Y., & Xu, F. (2016) · Trends in Biotechnology · doi:10.1016/j.tibtech.2016.03.004 · Cited by 711
pH-Responsive polymers: synthesis, properties and applications
Dai, S., Ravi, P., & Tam, K. C. (2008) · Soft Matter · doi:10.1039/b714741d · Cited by 693
3D Bioprinting for Tissue and Organ Fabrication
Zhang, Y. S., Yue, K., Aleman, J., Mollazadeh-Moghaddam, K., Bakht, S. M., Yang, J., Jia, W., Dell’Erba, V., Assawes, P., Shin, S. R., et al. (2017) · Annals of Biomedical Engineering · doi:10.1007/s10439-016-1612-8 · Cited by 682
Self-Folding Thermo-Magnetically Responsive Soft Microgrippers
Breger, J. C., Yoon, C., Xiao, R., Kwag, H. R., Wang, M. O., Fisher, J. P., Nguyen, T. D., & Gracias, D. H. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/am508621s · Cited by 655
Parametric analysis of the selective laser melting process
Yadroitsev, I., Bertrand, P., & Smurov, I. (2007) · Applied Surface Science · doi:10.1016/j.apsusc.2007.02.088 · Cited by 650
High-Force Soft Printable Pneumatics for Soft Robotic Applications
Yap, H. K., Ng, H. Y., & Yeow, C.-H. (2016) · Soft Robotics · doi:10.1089/soro.2016.0030 · Cited by 601
Active printed materials for complex self-evolving deformations
Raviv, D., Zhao, W., McKnelly, C., Papadopoulou, A., Kadambi, A., Shi, B., Hirsch, S., Dikovsky, D., Zyracki, M., Olguin, C., et al. (2014) · Scientific Reports · doi:10.1038/srep07422 · Cited by 568
Building Research Equipment with Free, Open-Source Hardware
Pearce, J. M. (2012) · Science · doi:10.1126/science.1228183 · Cited by 561
Gu, G. X., Chen, C.-T., Richmond, D. J., & Buehler, M. J. (2018) · Materials Horizons · doi:10.1039/c8mh00653a · Cited by 556
Vaezi, M., Chianrabutra, S., Mellor, B., & Yang, S. (2013) · Virtual and Physical Prototyping · doi:10.1080/17452759.2013.778175 · Cited by 548
Biocompatible Inkjet Printing Technique for Designed Seeding of Individual Living Cells
Nakamura, M., Kobayashi, A., Takagi, F., Watanabe, A., Hiruma, Y., Ohuchi, K., Iwasaki, Y., Horie, M., Morita, I., & Takatani, S. (2005) · Tissue Engineering · doi:10.1089/ten.2005.11.1658 · Cited by 538
Inkjet printing wearable electronic devices
Gao, M., Li, L., & Song, Y. (2017) · Journal of Materials Chemistry C · doi:10.1039/c7tc00038c · Cited by 535
4D Printing with Mechanically Robust, Thermally Actuating Hydrogels
Bakarich, S. E., Gorkin, R., Panhuis, M. I. H., & Spinks, G. M. (2015) · Macromolecular Rapid Communications · doi:10.1002/marc.201500079 · Cited by 526
3D printing for continuous fiber reinforced thermoplastic composites: mechanism and performance
Yang, C., Tian, X., Liu, T., Cao, Y., & Li, D. (2017) · Rapid Prototyping Journal · doi:10.1108/rpj-08-2015-0098 · Cited by 515
Wei, H., Zhang, Q., Yao, Y., Liu, L., Liu, Y., & Leng, J. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b12824 · Cited by 504
Morrison, R. J., Hollister, S. J., Niedner, M. F., Mahani, M. G., Park, A. H., Mehta, D. K., Ohye, R. G., & Green, G. E. (2015) · Science Translational Medicine · doi:10.1126/scitranslmed.3010825 · Cited by 498
Ultrafast Digital Printing toward 4D Shape Changing Materials
Huang, L., Jiang, R., Wu, J., Song, J., Bai, H., Li, B., Zhao, Q., & Xie, T. (2017) · Advanced Materials · doi:10.1002/adma.201605390 · Cited by 490
3D Printed Photoresponsive Devices Based on Shape Memory Composites
Yang, H., Leow, W. R., Wang, T., Wang, J., Yu, J., He, K., Qi, D., Wan, C., & Chen, X. (2017) · Advanced Materials · doi:10.1002/adma.201701627 · Cited by 483
4D printing smart biomedical scaffolds with novel soybean oil epoxidized acrylate
Miao, S., Zhu, W., Castro, N. J., Nowicki, M., Zhou, X., Cui, H., Fisher, J. P., & Zhang, L. G. (2016) · Scientific Reports · doi:10.1038/srep27226 · Cited by 477
De novo composite design based on machine learning algorithm
Gu, G. X., Chen, C.-T., & Buehler, M. J. (2018) · Extreme Mechanics Letters · doi:10.1016/j.eml.2017.10.001 · Cited by 470
Craig, D. (1999) · International Journal of Pharmaceutics · doi:10.1016/s0378-5173(98)00338-x · Cited by 459
Bridging topology optimization and additive manufacturing
Zegard, T., & Paulino, G. H. (2016) · Structural and Multidisciplinary Optimization · doi:10.1007/s00158-015-1274-4 · Cited by 457
4D Printing of Shape Memory‐Based Personalized Endoluminal Medical Devices
Zarek, M., Mansour, N., Shapira, S., & Cohn, D. (2017) · Macromolecular Rapid Communications · doi:10.1002/marc.201600628 · Cited by 419
Stimulus-Responsive “Smart” Hydrogels as Novel Drug Delivery Systems
Soppimath, K. S., Aminabhavi, T. M., Dave, A. M., Kumbar, S. G., & Rudzinski, W. E. (2002) · Drug Development and Industrial Pharmacy · doi:10.1081/ddc-120006428 · Cited by 389
Li, Y.-C., Zhang, Y. S., Akpek, A., Shin, S. R., & Khademhosseini, A. (2016) · Biofabrication · doi:10.1088/1758-5090/9/1/012001 · Cited by 385
4D Printed Actuators with Soft-Robotic Functions
López‐Valdeolivas, M., Liu, D., Broer, D. J., & Sánchez‐Somolinos, C. (2018) · Macromolecular Rapid Communications · doi:10.1002/marc.201700710 · Cited by 371
Roy, I., & Gupta, M. N. (2003) · Chemistry & Biology · doi:10.1016/j.chembiol.2003.12.004 · Cited by 371
4D printing of high performance shape memory polymer using stereolithography
Choong, Y. Y. C., Maleksaeedi, S., Eng, H., Wei, J., & Su, P.-C. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.04.049 · Cited by 328
Ryder Glacier in northwest Greenland is shielded from warm Atlantic water by a bathymetric sill
Jakobsson, M., Mayer, L. A., Nilsson, J., Stranne, C., Calder, B., O’Regan, M., Farrell, J. W., Cronin, T. M., Brüchert, V., Chawarski, J., et al. (2020) · Communications Earth & Environment · doi:10.1038/s43247-020-00043-0 · Cited by 319
Adaptive metamaterials by functionally graded 4D printing
Bodaghi, M., Damanpack, A. R., & Liao, W. H. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.08.069 · Cited by 302
Shape memory polymers for composites
Mu, T., Liu, L., Lan, X., Liu, Y., & Leng, J. (2018) · Composites Science and Technology · doi:10.1016/j.compscitech.2018.03.018 · Cited by 302
Okwuosa, T. C., Pereira, B. C., Arafat, B., Cieszynska, M., Isreb, A., & Alhnan, M. A. (2017) · Pharmaceutical Research · doi:10.1007/s11095-016-2073-3 · Cited by 277
4D Printing of Reversible Shape Morphing Hydrogel Structures
Naficy, S., Gately, R., Gorkin, R., Xin, H., & Spinks, G. M. (2017) · Macromolecular Materials and Engineering · doi:10.1002/mame.201600212 · Cited by 276
Zhang, Q., Zhang, K., & Hu, G. (2016) · Scientific Reports · doi:10.1038/srep22431 · Cited by 269
Reversible energy absorbing meta-sandwiches by FDM 4D printing
Bodaghi, M., Serjouei, A., Zolfagharian, A., Fotouhi, M., Rahman, H., & Durand, D. (2020) · International Journal of Mechanical Sciences · doi:10.1016/j.ijmecsci.2020.105451 · Cited by 268
A constitutive theory for shape memory polymers. Part I
Chen, Y.-C., & Lagoudas, D. C. (2008) · Journal of the Mechanics and Physics of Solids · doi:10.1016/j.jmps.2007.12.005 · Cited by 262
Restoration of Large Damage Volumes in Polymers
White, S. R., Moore, J. S., Sottos, N. R., Krull, B. P., Santa Cruz, W. A., & Gergely, R. C. R. (2014) · Science · doi:10.1126/science.1251135 · Cited by 258
A Graphene‐Based Bimorph Structure for Design of High Performance Photoactuators
Hu, Y., Wu, G., Lan, T., Zhao, J., Liu, Y., & Chen, W. (2015) · Advanced Materials · doi:10.1002/adma.201502777 · Cited by 258
Stimuli‐Responsive Theragrippers for Chemomechanical Controlled Release
Malachowski, K., Breger, J., Kwag, H. R., Wang, M. O., Fisher, J. P., Selaru, F. M., & Gracias, D. H. (2014) · Angewandte Chemie International Edition · doi:10.1002/anie.201311047 · Cited by 257
Kuribayashi-Shigetomi, K., Onoe, H., & Takeuchi, S. (2012) · PLoS ONE · doi:10.1371/journal.pone.0051085 · Cited by 255
Direct 3D printing of polymers onto textiles: experimental studies and applications
Pei, E., Shen, J., & Watling, J. (2015) · Rapid Prototyping Journal · doi:10.1108/rpj-09-2014-0126 · Cited by 240
Responsive cellulose-hydrogel composite ink for 4D printing
Mulakkal, M. C., Trask, R. S., Ting, V. P., & Seddon, A. M. (2018) · Materials & Design · doi:10.1016/j.matdes.2018.09.009 · Cited by 238
Advanced piezoelectric materials
Uchino, K. (2010) · Woodhead Publishing Limited eBooks · doi:10.1533/9781845699758 · Cited by 236
Three-Dimensional Printing of pH-Responsive and Functional Polymers on an Affordable Desktop Printer
Nadgorny, M., Xiao, Z., Chen, C., & Connal, L. A. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b07388 · Cited by 234
Closed-loop 4D-printed soft robots
Zolfagharian, A., Kaynak, A., & Kouzani, A. (2020) · Materials & Design · doi:10.1016/j.matdes.2019.108411 · Cited by 225
From 3D to 4D printing: Approaches and typical applications
Zhou, Y., Huang, W. M., Kang, S. F., Wu, X. L., Lu, H. B., Fu, J., & Cui, H. (2015) · Journal of Mechanical Science and Technology · doi:10.1007/s12206-015-0925-0 · Cited by 224
Botanical‐Inspired 4D Printing of Hydrogel at the Microscale
Hu, Y., Wang, Z., Jin, D., Zhang, C., Sun, R., Li, Z., Hu, K., Ni, J., Cai, Z., Pan, D., et al. (2020) · Advanced Functional Materials · doi:10.1002/adfm.201907377 · Cited by 221
Yu, K., Ritchie, A., Mao, Y., Dunn, M. L., & Qi, H. J. (2015) · Procedia IUTAM · doi:10.1016/j.piutam.2014.12.021 · Cited by 220
4D Printing: History and Recent Progress
Wu, J.-J., Huang, L.-M., Zhao, Q., & Xie, T. (2018) · Chinese Journal of Polymer Science · doi:10.1007/s10118-018-2089-8 · Cited by 219
Additive Manufacturing Technologies
Stampfl, J., & Hatzenbichler, M. (2014) · Springer eBooks · doi:10.1007/978-3-642-20617-7_6492 · Cited by 213
Additive manufacturing: Toward holistic design
Jared, B. H., Aguiló, M. A., Beghini, L. L., Boyce, B. L., Clark, B. W., Cook, A., Kaehr, B., & Robbins, J. (2017) · Scripta Materialia · doi:10.1016/j.scriptamat.2017.02.029 · Cited by 204
4D printing of shape memory polymers
Subash, A., & Kandasubramanian, B. (2020) · European Polymer Journal · doi:10.1016/j.eurpolymj.2020.109771 · Cited by 204
4D printing of mashed potato/purple sweet potato puree with spontaneous color change
He, C., Zhang, M., & Guo, C. (2020) · Innovative Food Science & Emerging Technologies · doi:10.1016/j.ifset.2019.102250 · Cited by 201
4D Printing: dawn of an emerging technology cycle
Pei, E. (2014) · Assembly Automation · doi:10.1108/aa-07-2014-062 · Cited by 199
3D printed nanocomposite matrix for the study of breast cancer bone metastasis
Zhu, W., Holmes, B., Glazer, R. I., & Zhang, L. G. (2016) · Nanomedicine: Nanotechnology, Biology and Medicine · doi:10.1016/j.nano.2015.09.010 · Cited by 193
3D Printing of Organs-On-Chips
Yi, H.-G., Lee, H., & Cho, D.-W. (2017) · Bioengineering · doi:10.3390/bioengineering4010010 · Cited by 193
Pattern Transformation of Heat-Shrinkable Polymer by Three-Dimensional (3D) Printing Technique
Zhang, Q., Yan, D., Zhang, K., & Hu, G. (2015) · Scientific Reports · doi:10.1038/srep08936 · Cited by 188
Cold, warm, and hot programming of shape memory polymers
Li, G., & Wang, A. (2016) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.24041 · Cited by 188
Review of 4D printing materials and their properties
Shin, D.-G., Kim, T.-H., & Kim, D.-E. (2017) · International Journal of Precision Engineering and Manufacturing-Green Technology · doi:10.1007/s40684-017-0040-z · Cited by 183
Biomimetic additive manufactured polymer composites for improved impact resistance
Gu, G. X., Takaffoli, M., Hsieh, A. J., & Buehler, M. J. (2016) · Extreme Mechanics Letters · doi:10.1016/j.eml.2016.09.006 · Cited by 180
Yang, K., Grant, J. C., Lamey, P., Joshi‐Imre, A., Lund, B. R., Smaldone, R. A., & Voit, W. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201700318 · Cited by 176
Bone‐Inspired Materials by Design: Toughness Amplification Observed Using 3D Printing and Testing
Libonati, F., Gu, G. X., Qin, Z., Vergani, L., & Buehler, M. J. (2016) · Advanced Engineering Materials · doi:10.1002/adem.201600143 · Cited by 175
Technological considerations for 4D printing: An overview
Pei, E., & Loh, G. H. (2018) · Progress in Additive Manufacturing · doi:10.1007/s40964-018-0047-1 · Cited by 171
Self-folding micropatterned polymeric containers
Azam, A., Laflin, K. E., Jamal, M., Fernandes, R., & Gracias, D. H. (2011) · Biomedical Microdevices · doi:10.1007/s10544-010-9470-x · Cited by 169
4D Printing of a Light-Driven Soft Actuator with Programmed Printing Density
Nishiguchi, A., Zhang, H., Schweizerhof, S., Schulte, M. F., Mourran, A., & Möller, M. (2020) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.0c02781 · Cited by 169
Laser Processing of Net-Shape NiTi Shape Memory Alloy
Krishna, B. V., Bose, S., & Bandyopadhyay, A. (2007) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-007-9127-4 · Cited by 163
Kuksenok, O., & Balazs, A. C. (2016) · Materials Horizons · doi:10.1039/c5mh00212e · Cited by 162
4D printing of shape memory polyurethane via stereolithography
Zhao, T., Yu, R., Li, X., Cheng, B., Zhang, Y., Yang, X. M., Zhao, X., Zhao, Y., & Huang, W. (2018) · European Polymer Journal · doi:10.1016/j.eurpolymj.2018.02.021 · Cited by 161
4D printing of products based on soy protein isolate via microwave heating for flavor development
Phuhongsung, P., Zhang, M., & Bhandari, B. (2020) · Food Research International · doi:10.1016/j.foodres.2020.109605 · Cited by 161
Cui, H., Miao, S., Esworthy, T. J., Lee, S., Zhou, X., Hann, S.-Y., Webster, T. J., Harris, B. T., & Zhang, L. G. (2019) · Nano Research · doi:10.1007/s12274-019-2340-9 · Cited by 159
Programmable morphing composites with embedded continuous fibers by 4D printing
Wang, Q., Tian, X., Huang, L., Li, D., Malakhov, A. V., & Полилов, А. Н. (2018) · Materials & Design · doi:10.1016/j.matdes.2018.06.027 · Cited by 157
Printing nature: Unraveling the role of nacre's mineral bridges
Gu, G. X., Libonati, F., Wettermark, S. D., & Buehler, M. J. (2017) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2017.05.007 · Cited by 151
Liu, Y., Zhang, W., Zhang, F., Lan, X., Leng, J., Liu, S., Jia, X., Cotton, C., Sun, B., Gu, B., et al. (2018) · Composites Part B Engineering · doi:10.1016/j.compositesb.2018.07.053 · Cited by 148
High speed 4D printing of shape memory polymers with nanosilica
Choong, Y. Y. C., Maleksaeedi, S., Eng, H., Yu, S., Wei, J., & Su, P. (2019) · Applied Materials Today · doi:10.1016/j.apmt.2019.100515 · Cited by 146
Thermal conductivity of architected cellular metamaterials
Mirabolghasemi, A., Akbarzadeh, A. H., Rodrigue, D., & Therriault, D. (2019) · Acta Materialia · doi:10.1016/j.actamat.2019.04.061 · Cited by 144
Fang, Z., Song, H., Zhang, Y., Jin, B., Wu, J., Zhao, Q., & Xie, T. (2020) · Matter · doi:10.1016/j.matt.2020.01.014 · Cited by 144
Zopf, D., Mitsak, A. G., Flanagan, C. L., et al. (2014) · Otolaryngology · doi:10.1177/0194599814552065 · Cited by 141
4D printing shape memory polymers for dynamic jewellery and fashionwear
Zarek, M., Layani, M., Eliazar, S., Mansour, N., Cooperstein, I., Shukrun, E., Szlar, A., Cohn, D., & Magdassi, S. (2016) · Virtual and Physical Prototyping · doi:10.1080/17452759.2016.1244085 · Cited by 138
Programmable, Pattern‐Memorizing Polymer Surface
Wang, Z., Hansen, C., Ge, Q., Maruf, S. H., Ahn, D. U., Qi, H. J., & Ding, Y. (2011) · Advanced Materials · doi:10.1002/adma.201101571 · Cited by 133
Cheng, C., Xie, H. Q., Xu, Z., Li, L., Jiang, M.-N., Li, T., Yang, K., & Wang, Y. (2020) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.125242 · Cited by 130
4D printing using anisotropic thermal deformation of 3D-printed thermoplastic parts
Goo, B., Hong, C.-H., & Park, K. (2020) · Materials & Design · doi:10.1016/j.matdes.2020.108485 · Cited by 126
Large deformations of soft metamaterials fabricated by 3D printing
Bodaghi, M., Damanpack, A. R., Hu, G., & Liao, W. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.06.002 · Cited by 125
Microstructure and corrosion behavior of laser processed NiTi alloy
Marattukalam, J. J., Singh, A. K., Datta, S., Das, M., Balla, V. K., Bontha, S., & Kalpathy, S. K. (2015) · Materials Science and Engineering C · doi:10.1016/j.msec.2015.07.067 · Cited by 124
Halani, P. R., Kaya, İ., Shin, Y. C., & Karaca, H. E. (2012) · Materials Science and Engineering A · doi:10.1016/j.msea.2012.09.031 · Cited by 124
Reversible shape change structures by grayscale pattern 4D printing
Wu, J., Zhao, Z., Kuang, X., Hamel, C. M., Fang, D., & Qi, H. J. (2018) · Multifunctional Materials · doi:10.1088/2399-7532/aac322 · Cited by 124
Gosnell, J. M., Pietila, T., Samuel, B. P., Kurup, H. K. N., Haw, M. P., & Vettukattil, J. J. (2016) · Journal of Imaging Informatics in Medicine · doi:10.1007/s10278-016-9879-8 · Cited by 113
4D printing: processability and measurement of recovery force in shape memory polymers
Monzón, M., Paz, R., Pei, E., Ortega, Z., Suárez, L., Ortega, Z., Alemán‐Domínguez, M. E., Plucinski, T., & Clow, N. (2016) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-016-9233-9 · Cited by 110
Ahn, S., Lee, K., Kim, H.-J., Wu, R., Kim, J., & Song, S.-H. (2012) · International Journal of Precision Engineering and Manufacturing · doi:10.1007/s12541-012-0081-8 · Cited by 109
3D printing of responsive hydrogels for drug-delivery systems
Larush, L., Kaner, I., Fluksman, A., Tamsut, A., Pawar, A. A., Lesnovski, P., Benny, O., & Magdassi, S. (2017) · Journal of 3D Printing in Medicine · doi:10.2217/3dp-2017-0009 · Cited by 108
4D printing composite with electrically controlled local deformation
Shao, L., Zhao, B., Zhang, Q., Xing, Y., & Zhang, K. (2020) · Extreme Mechanics Letters · doi:10.1016/j.eml.2020.100793 · Cited by 108
Bai, J., Goodridge, R., Hague, R., & Song, M. (2013) · Polymer Engineering and Science · doi:10.1002/pen.23459 · Cited by 105
Design of a shape memory composite(SMC) using 4D printing technology
Kang, M., Pyo, Y., Jang, J. Y., Park, Y., Son, Y.-H., Choi, M. C., Ha, J. W., Chang, Y., & Lee, C. S. (2018) · Sensors and Actuators A Physical · doi:10.1016/j.sna.2018.08.049 · Cited by 103
Development of Novel Three-Dimensional Printed Scaffolds for Osteochondral Regeneration
Holmes, B. B., Zhu, W., Li, J., Lee, J. D., & Zhang, L. G. (2014) · Tissue Engineering Part A · doi:10.1089/ten.tea.2014.0138 · Cited by 102
A Drop-on-Demand Ink-Jet Printer for Combinatorial Libraries and Functionally Graded Ceramics
Mohebi, M. M., & Evans, J. (2002) · Journal of Combinatorial Chemistry · doi:10.1021/cc010075e · Cited by 100
Hamilton, R. F., Palmer, T. A., & Bimber, B. A. (2015) · Scripta Materialia · doi:10.1016/j.scriptamat.2015.01.018 · Cited by 98
Plant leaf-mimetic smart wind turbine blades by 4D printing
Momeni, F., Sabzpoushan, S., Valizadeh, R., Morad, M. R., Liu, X., & Ni, J. (2018) · Renewable Energy · doi:10.1016/j.renene.2018.05.095 · Cited by 98
Dual-method molding of 4D shape memory polyimide ink
Li, X., Yang, Y., Zhang, Y., Wang, T., Yang, Z., Wang, Q., & Zhang, X. (2020) · Materials & Design · doi:10.1016/j.matdes.2020.108606 · Cited by 87
Yu, Y., Liu, H., Qian, K., Yang, H., McGehee, M., Gu, J., Luo, D., Yao, L., & Zhang, Y. J. (2020) · Computer-Aided Design · doi:10.1016/j.cad.2020.102817 · Cited by 84
4D printing of polyurethane paint-based composites
Su, J.-W., Gao, W., Trinh, K., Kenderes, S. M., Tekin Pulatsu, E., Zhang, C., Whittington, A., Lin, M., & Lin, J. (2019) · International Journal of Smart and Nano Materials · doi:10.1080/19475411.2019.1618409 · Cited by 81
Digital manufacture of shape changing components
Yu, K., Dunn, M. L., & Qi, H. J. (2015) · Extreme Mechanics Letters · doi:10.1016/j.eml.2015.07.005 · Cited by 76
Current developments in multifunctional smart materials for 3D/4D bioprinting
Castro, N. J., Meinert, C., Levett, P. A., & Hutmacher, D. (2017) · Current Opinion in Biomedical Engineering · doi:10.1016/j.cobme.2017.04.002 · Cited by 72
Niendorf, T., Brenne, F., Krooß, P., Vollmer, M., Günther, J., Schwarze, D., & Biermann, H. (2016) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-016-3412-z · Cited by 70
Teoh, J. E. M., Zhao, Y., An, J., Chua, C. K., & Liu, Y. (2017) · Smart Materials and Structures · doi:10.1088/1361-665x/aa908a · Cited by 67
Development of composite springs using 4D printing method
Hoa, S. V. (2018) · Composite Structures · doi:10.1016/j.compstruct.2018.12.003 · Cited by 64
Campbell, T. A., Tibbits, S., & Garrett, B. N. (2014) · Scientific American · doi:10.1038/scientificamerican1114-60 · Cited by 63
Giftedness and Talent in the 21st Century: Adapting to the Turbulence of Globalization
Sternberg, R. J., & Ambrose, D. (2016) · SensePublishers eBooks · doi:10.1007/978-94-6300-503-6 · Cited by 61
Synthesis of Macroporous Thermosensitive Hydrogels: A Novel Method of Controlling Pore Size
Zhao, Q., Sun, J., Ling, Q., et al. (2009) · Langmuir · doi:10.1021/la8038939 · Cited by 51
Awasthi, S., Verma, T., Agarwal, M., Singh, J. V., Srivastava, N. M., & Nichter, M. (2017) · Clinical Epidemiology and Global Health · doi:10.1016/j.cegh.2017.01.001 · Cited by 51
Modified commercial UV curable elastomers for passive 4D printing
Hingorani, H., Zhang, Y., Zhang, B., Serjouei, A., & Ge, Q. (2019) · International Journal of Smart and Nano Materials · doi:10.1080/19475411.2019.1591540 · Cited by 47
A 3D Printed Paper-Based Thermally Driven Soft Robotic Gripper Inspired by Cabbage
Hu, F., Lyu, L., & He, Y. (2019) · International Journal of Precision Engineering and Manufacturing · doi:10.1007/s12541-019-00199-6 · Cited by 45
Inkjet Printing on PET Substrate
Riheen, M. A., Saha, T. K., & Sekhar, P. K. (2019) · Journal of The Electrochemical Society · doi:10.1149/2.0091909jes · Cited by 42
Twisted composite structures made by 4D printing method
Hoa, S. V., & Cai, X. (2020) · Composite Structures · doi:10.1016/j.compstruct.2020.111883 · Cited by 30
Formation of letters in the alphabet using 4D printing of composites
Hoa, S. V., & Rosca, I. D. (2020) · Materials Today Communications · doi:10.1016/j.mtcomm.2020.101115 · Cited by 21
Clearing the Way for Pivotal 21st-Century Innovation: More Talent Literacy, Less Talent Management
Jacobsen, M. E. (2016) · SensePublishers eBooks · doi:10.1007/978-94-6300-503-6_10 · Cited by 15
Gu, G. X., & Buehler, M. J. (2018) · Acta Mechanica · doi:10.1007/s00707-018-2208-1 · Cited by 13
Three-Way Shape Memory Composite Actuator
TOBUSHI, H., HAYASHI, S., Pieczyska, E. A., Date, K., & Nishimura, Y. (2011) · Materials science forum · doi:10.4028/www.scientific.net/msf.674.225 · Cited by 7
(2001) · doi:10.1002/1527-2648(200111)3:11<837::aid-adem837>3.0.co;2-0
Cited by
Deep Learning in Mechanical Metamaterials: From Prediction and Generation to Inverse Design
Zheng, X., Zhang, X., Chen, T., & Watanabe, I. (2023) · Advanced Materials · doi:10.1002/adma.202302530 · Cited by 372
Khalid, M. Y., Arif, Z. U., Noroozi, R., Zolfagharian, A., & Bodaghi, M. (2022) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2022.07.035 · Cited by 336
Pugliese, R., & Regondi, S. (2022) · Polymers · doi:10.3390/polym14142794 · Cited by 152
Metadata
- Authors
- Ahmed, A., Arya, S., Gupta, V., Furukawa, H., & Khosla, A.
- Venue
- Polymer
- Publisher
- Elsevier BV
- Published
- 2021-07
- Volume
- 228
- Pages
- 123926
- ISSN
- 0032-3861 (ISSN-L)
- OpenAlex
- W3171635419
- Cited by
- 350
- References
- 152
- FWCI
- 20.70
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.