CoChat

Iron( ii ) carboxylates and simple carboxamides: an inexpensive and modular catalyst system for the synthesis of PLLA and PLLA-PCL block copolymers

Open access
Kirchhecker, Sarah, Nguyen, Ngoc, Reichert, Stefan, Lützow, Karola, Eselem Bungu, Paul S., Jacobi von Wangelin, Axel, Sandl, Sebastian, Neffe, Axel T. · 2023 · RSC Advances

The DOI matches its Crossref record; 89 of the 89 references it cites were found in a registry or an index; 20 of the 68 sources its claims cite were checked for support.

Abstract

The combination of inexpensive Fe( ii ) acetate with low molecular weight aliphatic carboxamides in situ generates an effective catalyst system for the ring opening polymerisation of lactones.

Overview

CoChat Summary

## TL;DR

This paper shows that inexpensive Fe(ii) acetate plus simple carboxamides forms an effective in situ catalyst system for ring-opening polymerisation of l-lactide, giving PLLA with very narrow dispersity and no racemisation under the right conditions. The same system also enables low-randomness PLLA-PCL block copolymers in the melt.

## Key findings

  • With Fe(OAc)2 plus 10 mol% carboxamides, the authors obtained PLLA with molar masses up to 15 000 g mol−1 and dispersity as low as Đ = 1.03 under melt conditions.
  • The best additive was DEAA (N,N-diethylacetamide): it gave >90% conversion, >94% initiator incorporation, Đ = 1.03, and the lowest transesterification among the tested amides; DMAA, TMU, and EAA were also effective.
  • Using the optimised system, they made PLLA of different target masses; initiator incorporation fell from 99% for PLLA-DEAA-5k to 22% for PLLA-DEAA-100k, and the catalyst was said to reach a practical limit of about 28 000 g mol−1 under those conditions.
  • For copolymers, sequential addition enabled block structures with low randomness; the best reported block copolymer, PCL-b-PLLA-140-105, had the lowest dispersity (Đ = 1.47), while the PLLA/PCL random copolymers had higher randomness at 140 °C than at 105 °C.

## Methods

  • The study systematically screened Fe(ii) sources (Fe(OAc)2 vs. freshly prepared Fe(OPiv)2) and a range of carboxamides with different steric/electronic properties in melt ROP of l-lactide, using 1,8-octanediol or 1-hexanol as initiators.
  • Polymer products were analysed by 1H/13C NMR, GPC, MALDI-ToF-MS, DSC, and polarimetry; conversions and microstructures were quantified from NMR, while dispersity and molar masses were obtained from GPC/MALDI.
  • Copolymerisation experiments covered lactide/caprolactone and lactide/glycolide systems, including random and sequential block addition protocols at 105 °C and 140 °C.

## Limitations

  • The paper states that high transesterification becomes competitive at longer reaction times, especially for slower CL incorporation, which limits the formation of truly random copolymers and can increase dispersity.
  • The authors note that the Fe(OAc)2/DEAA system “appears to reach its limit” under the tested conditions and does not reliably reach the 10 kDa target for all copolymerizations or higher-mass PLLA targets; this is a limitation evident from the reported results.
  • Evidence from the text shows some results are condition-sensitive: higher temperatures (e.g. 140 °C) can speed reactions but are associated with racemisation risk and more transesterification, making the process less broadly robust.

Model-written summary. Check it against the paper before relying on it.

Integrity signals

Registry

Crossref · 10.1039/d3ra03112h

Cites

89 of 89 references verified0 citation errors · 0 not checkable

Statistics

Nothing to recompute.

Figures

Scheme 1 Illustration of a hypothetical iron(ii) complex bearing l-lactide, carboxamide, and alkoxide ligands.
Scheme 1 Illustration of a hypothetical iron(ii) complex bearing l-lactide, carboxamide, and alkoxide ligands.CC BY · PubMed Central
Fig. 1 Representative MALDI-ToF-MS spectrum. (A) Full spectrum of PLLA-DEAA. (B) excerpt showing the two series (2n and (2n + 1)).
Fig. 1 Representative MALDI-ToF-MS spectrum. (A) Full spectrum of PLLA-DEAA. (B) excerpt showing the two series (2n and (2n + 1)).CC BY · PubMed Central
Scheme 2 Copolymerisation of LA and CL using the Fe(OAc)2-amide catalyst system.
Scheme 2 Copolymerisation of LA and CL using the Fe(OAc)2-amide catalyst system.CC BY · PubMed Central
Fig. 2 13C-NMR carbonyl regions of the l-lactide and CL homopolymers, copolymers, and block copolymers (in ppm).
Fig. 2 13C-NMR carbonyl regions of the l-lactide and CL homopolymers, copolymers, and block copolymers (in ppm).CC BY · PubMed Central

Verification

Claims the paper makes

17 Valid · 0 Not valid · 18 Not checked · 105 Own results and interpretations

72 more claims · 1 with their cited sources checked

Create a free account to see all 140 claims and every source verdict.

See all claims — free account
  • It may state two separate claims as one. 52
  • Probably not a substantial claim. 20

Create a free account to see these claims.

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

Each contradiction between two passages listed here was confirmed by an independent check.

1 of 1

Citations

Cites

Research works printed but not linked: 2

  1. L.Rüttinger , P.van Ackern , T.Lepold , R.Vogt and A.Auberger , Impacts of climate change on mining, related environmental risks and raw material supply , Final Report, 2020 , http://www.umweltbundesamt.de/publikationen
  2. PLLA , Sigma Aldrich catalogue , https://www.sigmaaldrich.com/DE/de/product/aldrich/764698

Cited by

See all 6

Metadata

Authors
Kirchhecker, S., Nguyen, N., Reichert, S., Lützow, K., Eselem Bungu, P. S., Jacobi von Wangelin, A., Sandl, S., & Neffe, A. T.
Affiliations
  • Helmholtz-Zentrum Hereon (DE)
  • Universität Hamburg (DE)
  • Institute of Active Polymers, Helmholtz-Zentrum Hereon, Kantstr. 55, 14513 Teltow, Germany
  • Department of Chemistry, University of Hamburg, Martin-Luther-King-Platz 6, 20146 Hamburg, Germany
Corresponding author
Neffe, Axel T.
Venue
RSC Advances
Published
2023
Volume
13
Issue
25
Pages
17102-17113
ISSN
2046-2069 (ISSN-L)
OpenAlex
W4379798894
Cited by
6
References
89
Citations by year
2026: 1 · 2024: 5
FWCI
0.38
Type
journal article
Language
en
Open access
Locations
  • RSC Advances (publishedVersion, cc-by)
  • PubMed Central (publishedVersion, cc-by)
  • PubMed (publishedVersion)
Funders
Helmholtz Association
Topics
  • Physical Sciences › Materials Science › Biomaterials › biodegradable polymer synthesis and properties
  • Physical Sciences › Chemistry › Organic Chemistry › Advanced Polymer Synthesis and Characterization
  • Physical Sciences › Chemical Engineering › Process Chemistry and Technology › Carbon dioxide utilization in catalysis
Keywords
carboxamides, ring-opening polymerization, poly(L-lactic acid), poly(L-lactide-co-ε-caprolactone), block copolymers, catalytic systems, steric and electronic effects, biomedical polymers

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

The claim verdicts this report counts are experimental: their accuracy is not yet measured.

A language model drew the claims from the paper on 2026-10-09, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).

A second model labelled each claim on 2026-10-09 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).

Cited sources are checked with a language model’s help (gpt-6-sol).

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.