The DOI matches its Crossref record; 158 of the 158 references it cites were found in a registry or an index.
Review—Li Metal Anode in Working Lithium-Sulfur Batteries
Open accessAbstract
Due to the high theoretical energy density of 2600 Wh kg −1 , lithium–sulfur batteries are strongly regarded as the promising next-generation energy storage devices. However, the practical applications of lithium–sulfur batteries are challenged by several obstacles, including the low sulfur utilization and poor lifespan, which are partly attributed to the shuttle of lithium polysulfides and lithium dendrite growth in working lithium–sulfur batteries. Suppressing lithium dendrite growth is a necessary step not only for a safe and efficient Li metal anode, but also for a high capacity cell with a high Coulombic efficiency. Herein we review the lithium metal anode protection in a polysulfide-rich environment, relative to most reviews on lithium metal anode without considering the effect of lithium polysulfides in lithium metal batteries. Firstly, the importance and dilemma of Li metal anode issues in lithium–sulfur batteries are underscored, aiming to arouse the attentions to Li metal anode protection. Specific attentions are paid to the surface chemistry of Li metal anode in a polysulfide-rich lithium–sulfur battery. Next, the proposed strategies to stabilize solid electrolyte interface and protect Li metal anode are included. Finally, a general conclusion and a perspective on the current limitations, as well as recommended future research directions of Li metal anode in lithium–sulfur batteries are presented.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Reviving the lithium metal anode for high-energy batteries
Lin, D., Liu, Y., & Cui, Y. (2017) · Nature Nanotechnology · doi:10.1038/nnano.2017.16 · Cited by 6,763
Toward Safe Lithium Metal Anode in Rechargeable Batteries: A Review
Cheng, X.-B., Zhang, R., Zhao, C.-Z., & Zhang, Q. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00115 · Cited by 6,197
Self-citationA highly ordered nanostructured carbon–sulphur cathode for lithium–sulphur batteries
Ji, X., Lee, K. T., & Nazar, L. F. (2009) · Nature Materials · doi:10.1038/nmat2460 · Cited by 5,988
Electrolytes and Interphases in Li-Ion Batteries and Beyond
Xu, K. (2014) · Chemical Reviews · doi:10.1021/cr500003w · Cited by 5,566
Promise and reality of post-lithium-ion batteries with high energy densities
Choi, J. W., & Aurbach, D. (2016) · Nature Reviews Materials · doi:10.1038/natrevmats.2016.13 · Cited by 5,110
A lithium superionic conductor
Kamaya, N., Homma, K., Yamakawa, Y., Hirayama, M., Kanno, R., Yonemura, M., Kamiyama, T., Kato, Y., Hama, S., Kawamoto, K., et al. (2011) · Nature Materials · doi:10.1038/nmat3066 · Cited by 4,978
Lithium battery chemistries enabled by solid-state electrolytes
Manthiram, A., Yu, X., & Wang, S. (2017) · Nature Reviews Materials · doi:10.1038/natrevmats.2016.103 · Cited by 4,689
Rechargeable Lithium–Sulfur Batteries
Manthiram, A., Fu, Y., Chung, S.-H., Zu, C., & Su, Y.-S. (2014) · Chemical Reviews · doi:10.1021/cr500062v · Cited by 4,665
Peled, E. (1979) · Journal of The Electrochemical Society · doi:10.1149/1.2128859 · Cited by 2,899
Lithium–Sulfur Batteries: Electrochemistry, Materials, and Prospects
Yin, Y., Xin, S., Guo, Y., & Wan, L. (2013) · Angewandte Chemie International Edition · doi:10.1002/anie.201304762 · Cited by 2,707
High rate and stable cycling of lithium metal anode
Qian, J., Henderson, W. A., Xu, W., Bhattacharya, P., Engelhard, M., Borodin, O., & Zhang, J.-G. (2015) · Nature Communications · doi:10.1038/ncomms7362 · Cited by 2,561
A new class of Solvent-in-Salt electrolyte for high-energy rechargeable metallic lithium batteries
Suo, L., Hu, Y.-S., Li, H., Armand, M., & Chen, L. (2013) · Nature Communications · doi:10.1038/ncomms2513 · Cited by 2,314
Review—SEI: Past, Present and Future
Peled, E., & Menkin, S. (2017) · Journal of The Electrochemical Society · doi:10.1149/2.1441707jes · Cited by 2,182
Dendrite-Free Lithium Deposition via Self-Healing Electrostatic Shield Mechanism
Ding, F., Xu, W., Graff, G. L., Zhang, J., Sushko, M. L., Chen, X., Shao, Y., Engelhard, M. H., Nie, Z., Xiao, J., et al. (2013) · Journal of the American Chemical Society · doi:10.1021/ja312241y · Cited by 2,107
Negating interfacial impedance in garnet-based solid-state Li metal batteries
Han, X., Gong, Y., Fu, K., He, X., Hitz, G. T., Dai, J., Pearse, A., Liu, B., Wang, H., Rubloff, G., et al. (2017) · Nature Materials · doi:10.1038/nmat4821 · Cited by 2,025
Lin, D., Liu, Y., Liang, Z., Lee, H.-W., Sun, J., Wang, H., Yan, K., Xie, J., & Cui, Y. (2016) · Nature Nanotechnology · doi:10.1038/nnano.2016.32 · Cited by 1,798
A Review of Solid Electrolyte Interphases on Lithium Metal Anode
Cheng, X., Zhang, R., Zhao, C., Wei, F., Zhang, J., & Zhang, Q. (2016) · Advanced Science · doi:10.1002/advs.201500213 · Cited by 1,786
Self-citationMore Reliable Lithium‐Sulfur Batteries: Status, Solutions and Prospects
Fang, R., Zhao, S., Sun, Z., Wang, D., Cheng, H., & Li, F. (2017) · Advanced Materials · doi:10.1002/adma.201606823 · Cited by 1,785
Design principles for electrolytes and interfaces for stable lithium-metal batteries
Tikekar, M. D., Choudhury, S., Tu, Z., & Archer, L. A. (2016) · Nature Energy · doi:10.1038/nenergy.2016.114 · Cited by 1,765
Interconnected hollow carbon nanospheres for stable lithium metal anodes
Zheng, G., Lee, S. W., Liang, Z., Lee, H.-W., Yan, K., Yao, H., Wang, H., Li, W., Chu, S., & Cui, Y. (2014) · Nature Nanotechnology · doi:10.1038/nnano.2014.152 · Cited by 1,764
Review on High‐Loading and High‐Energy Lithium–Sulfur Batteries
Peng, H., Huang, J., Cheng, X., & Zhang, Q. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201700260 · Cited by 1,746
Self-citationFluoroethylene Carbonate Additives to Render Uniform Li Deposits in Lithium Metal Batteries
Zhang, X., Cheng, X., Chen, X., Yan, C., & Zhang, Q. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201605989 · Cited by 1,699
Self-citationAurbach, D. (2002) · Solid State Ionics · doi:10.1016/s0167-2738(02)00080-2 · Cited by 1,697
Nanostructured Metal Oxides and Sulfides for Lithium–Sulfur Batteries
Liu, X., Huang, J., Zhang, Q., & Mai, L. (2017) · Advanced Materials · doi:10.1002/adma.201601759 · Cited by 1,616
Self-citationStable lithium electrodeposition in liquid and nanoporous solid electrolytes
Lu, Y., Tu, Z., & Archer, L. A. (2014) · Nature Materials · doi:10.1038/nmat4041 · Cited by 1,592
An Artificial Solid Electrolyte Interphase Layer for Stable Lithium Metal Anodes
Li, N., Yin, Y., Yang, C., & Guo, Y. (2016) · Advanced Materials · doi:10.1002/adma.201504526 · Cited by 1,577
The synergetic effect of lithium polysulfide and lithium nitrate to prevent lithium dendrite growth
Li, W., Yao, H., Yan, K., Zheng, G., Liang, Z., Chiang, Y.-M., & Cui, Y. (2015) · Nature Communications · doi:10.1038/ncomms8436 · Cited by 1,540
On the Surface Chemical Aspects of Very High Energy Density, Rechargeable Li–Sulfur Batteries
Aurbach, D., Pollak, E., Elazari, R., Salitra, G., Kelley, C. S., & Affinito, J. (2009) · Journal of The Electrochemical Society · doi:10.1149/1.3148721 · Cited by 1,443
Tao, X., Wang, J., Liu, C., Wang, H., Yao, H., Zheng, G., Seh, Z. W., Cai, Q., Li, W., Zhou, G., et al. (2016) · Nature Communications · doi:10.1038/ncomms11203 · Cited by 1,391
Electrolyte additive enabled fast charging and stable cycling lithium metal batteries
Zheng, J., Engelhard, M. H., Mei, D., Jiao, S., Polzin, B. J., Zhang, J.-G., & Xu, W. (2017) · Nature Energy · doi:10.1038/nenergy.2017.12 · Cited by 1,343
Zheng, G., Yang, Y., Cha, J. J., Hong, S. S., & Cui, Y. (2011) · Nano Letters · doi:10.1021/nl2027684 · Cited by 1,295
Catalytic oxidation of Li 2 S on the surface of metal sulfides for Li−S batteries
Zhou, G., Tian, H., Jin, Y., Tao, X., Liu, B., Zhang, R., Seh, Z. W., Zhuo, D., Liu, Y., Sun, J., et al. (2017) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1615837114 · Cited by 1,278
Self-citationZhang, R., Chen, X., Chen, X., Cheng, X., Zhang, X., Yan, C., & Zhang, Q. (2017) · Angewandte Chemie International Edition · doi:10.1002/anie.201702099 · Cited by 1,225
Self-citationReviving Lithium‐Metal Anodes for Next‐Generation High‐Energy Batteries
Guo, Y., Li, H., & Zhai, T. (2017) · Advanced Materials · doi:10.1002/adma.201700007 · Cited by 1,215
Sustainability and in situ monitoring in battery development
Grey, C. P., & Tarascon, J. M. (2017) · Nature Materials · doi:10.1038/nmat4777 · Cited by 1,213
Advanced Model for Solid Electrolyte Interphase Electrodes in Liquid and Polymer Electrolytes
Peled, E., Golodnitsky, D., & Ardel, G. (1997) · Journal of The Electrochemical Society · doi:10.1149/1.1837858 · Cited by 1,205
Lithium sulfur batteries, a mechanistic review
Wild, M., O'Neill, L., Zhang, T., Purkayastha, R., Minton, G., Marinescu, M., & Offer, G. J. (2015) · Energy & Environmental Science · doi:10.1039/c5ee01388g · Cited by 1,107
Enhancing ionic conductivity in composite polymer electrolytes with well-aligned ceramic nanowires
Liu, W., Lee, S. W., Lin, D., Shi, F., Wang, S., Sendek, A. D., & Cui, Y. (2017) · Nature Energy · doi:10.1038/nenergy.2017.35 · Cited by 1,103
A facile surface chemistry route to a stabilized lithium metal anode
Liang, X., Pang, Q., Kochetkov, I. R., Sempere, M. S., Huang, H., Sun, X., & Nazar, L. F. (2017) · Nature Energy · doi:10.1038/nenergy.2017.119 · Cited by 1,083
Cheng, X., Hou, T., Zhang, R., Peng, H., Zhao, C., Huang, J., & Zhang, Q. (2016) · Advanced Materials · doi:10.1002/adma.201506124 · Cited by 994
Self-citationLiu, Y., Lin, D., Yuen, P. Y., Liu, K., Xie, J., Dauskardt, R. H., & Cui, Y. (2017) · Advanced Materials · doi:10.1002/adma.201605531 · Cited by 990
Lin, H., Yang, L., Jiang, X., Li, G., Zhang, T., Yao, Q., Zheng, G. W., & Lee, J. Y. (2017) · Energy & Environmental Science · doi:10.1039/c7ee01047h · Cited by 952
Role of LiNO3 in rechargeable lithium/sulfur battery
Zhang, S. S. (2012) · Electrochimica Acta · doi:10.1016/j.electacta.2012.03.081 · Cited by 947
Fu, K. (., Gong, Y., Dai, J., Gong, A., Han, X., Yao, Y., Wang, C., Wang, Y., Chen, Y., Yan, C., et al. (2016) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1600422113 · Cited by 930
Lithium-coated polymeric matrix as a minimum volume-change and dendrite-free lithium metal anode
Liu, Y., Lin, D., Liang, Z., Zhao, J., Yan, K., & Cui, Y. (2016) · Nature Communications · doi:10.1038/ncomms10992 · Cited by 902
Chemical Dealloying Derived 3D Porous Current Collector for Li Metal Anodes
Yun, Q., He, Y., Lv, W., Zhao, Y., Li, B., Kang, F., & Yang, Q. (2016) · Advanced Materials · doi:10.1002/adma.201601409 · Cited by 870
3D Porous Cu Current Collector/Li‐Metal Composite Anode for Stable Lithium‐Metal Batteries
Li, Q., Zhu, S., & Lu, Y. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201606422 · Cited by 854
An anion-immobilized composite electrolyte for dendrite-free lithium metal anodes
Zhao, C.-Z., Zhang, X.-Q., Cheng, X.-B., Zhang, R., Xu, R., Chen, P.-Y., Peng, H.-J., Huang, J.-Q., & Zhang, Q. (2017) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1708489114 · Cited by 849
Self-citationLiang, Z., Lin, D., Zhao, J., Lu, Z., Liu, Y., Liu, C., Lu, Y., Wang, H., Yan, K., Tao, X., et al. (2016) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1518188113 · Cited by 846
Prestoring Lithium into Stable 3D Nickel Foam Host as Dendrite‐Free Lithium Metal Anode
Chi, S., Liu, Y., Song, W., Fan, L., & Zhang, Q. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201700348 · Cited by 846
Self-citationFu, K. (., Gong, Y., Liu, B., Zhu, Y., Xu, S., Yao, Y., Luo, W., Wang, C., Lacey, S. D., Dai, J., et al. (2017) · Science Advances · doi:10.1126/sciadv.1601659 · Cited by 842
Review—Superconcentrated Electrolytes for Lithium Batteries
Yamada, Y., & Yamada, A. (2015) · Journal of The Electrochemical Society · doi:10.1149/2.0041514jes · Cited by 821
Huang, J.-Q., Zhuang, T.-Z., Zhang, Q., Peng, H.-J., Chen, C.-M., & Wei, F. (2015) · ACS Nano · doi:10.1021/nn507178a · Cited by 809
Self-citationChen, R., Qu, W., Guo, X., Li, L., & Wu, F. (2016) · Materials Horizons · doi:10.1039/c6mh00218h · Cited by 797
Protected Lithium‐Metal Anodes in Batteries: From Liquid to Solid
Yang, C., Fu, K., Zhang, Y., Hitz, E., & Hu, L. (2017) · Advanced Materials · doi:10.1002/adma.201701169 · Cited by 757
Failure Mechanism for Fast‐Charged Lithium Metal Batteries with Liquid Electrolytes
Lu, D., Shao, Y., Lozano, T., Bennett, W. D., Graff, G. L., Polzin, B., Zhang, J., Engelhard, M. H., Saenz, N. T., Henderson, W. A., et al. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201400993 · Cited by 740
Direct Calculation of Li-Ion Transport in the Solid Electrolyte Interphase
Shi, S., Lu, P., Liu, Z., Qi, Y., Hector, L. G., Li, H., & Harris, S. J. (2012) · Journal of the American Chemical Society · doi:10.1021/ja305366r · Cited by 712
Zhang, R., Cheng, X., Zhao, C., Peng, H., Shi, J., Huang, J., Wang, J., Wei, F., & Zhang, Q. (2016) · Advanced Materials · doi:10.1002/adma.201504117 · Cited by 686
Self-citationWang, C., Gong, Y., Liu, B., Fu, K., Yao, Y., Hitz, E., Li, Y., Dai, J., Xu, S., Luo, W., et al. (2017) · Nano Letters · doi:10.1021/acs.nanolett.6b04695 · Cited by 682
A review of flexible lithium–sulfur and analogous alkali metal–chalcogen rechargeable batteries
Peng, H.-J., Huang, J.-Q., & Zhang, Q. (2017) · Chemical Society Reviews · doi:10.1039/c7cs00139h · Cited by 680
Self-citationFree-Standing Copper Nanowire Network Current Collector for Improving Lithium Anode Performance
Lu, L.-L., Ge, J., Yang, J.-N., Chen, S.-M., Yao, H.-B., Zhou, F., & Yu, S.-H. (2016) · Nano Letters · doi:10.1021/acs.nanolett.6b01581 · Cited by 678
Transition from Superlithiophobicity to Superlithiophilicity of Garnet Solid-State Electrolyte
Luo, W., Gong, Y., Zhu, Y., Fu, K. K., Dai, J., Lacey, S. D., Wang, C., Liu, B., Han, X., Mo, Y., et al. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.6b06777 · Cited by 671
Huang, J.-Q., Zhang, Q., & Wei, F. (2015) · Energy Storage Materials · doi:10.1016/j.ensm.2015.09.008 · Cited by 665
Self-citationUltrafine Silver Nanoparticles for Seeded Lithium Deposition toward Stable Lithium Metal Anode
Yang, C., Yao, Y., He, S., Xie, H., Hitz, E., & Hu, L. (2017) · Advanced Materials · doi:10.1002/adma.201702714 · Cited by 661
Enhanced Electrochemical Kinetics on Conductive Polar Mediators for Lithium–Sulfur Batteries
Peng, H., Zhang, G., Chen, X., Zhang, Z., Xu, W., Huang, J., & Zhang, Q. (2016) · Angewandte Chemie International Edition · doi:10.1002/anie.201605676 · Cited by 649
Self-citationRecent Advances in Electrolytes for Lithium–Sulfur Batteries
Zhang, S., Ueno, K., Dokko, K., & Watanabe, M. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201500117 · Cited by 616
Carbon materials for Li–S batteries: Functional evolution and performance improvement
Liang, J., Sun, Z.-H., Li, F., & Cheng, H.-M. (2016) · Energy Storage Materials · doi:10.1016/j.ensm.2015.09.007 · Cited by 593
A Flexible Sulfur‐Graphene‐Polypropylene Separator Integrated Electrode for Advanced Li–S Batteries
Zhou, G., Li, L., Wang, D., Shan, X., Pei, S., Li, F., & Cheng, H. (2015) · Advanced Materials · doi:10.1002/adma.201404210 · Cited by 590
Zhu, B., Jin, Y., Hu, X., Zheng, Q., Zhang, S., Wang, Q., & Zhu, J. (2017) · Advanced Materials · doi:10.1002/adma.201603755 · Cited by 587
Graphitized Carbon Fibers as Multifunctional 3D Current Collectors for High Areal Capacity Li Anodes
Zuo, T., Wu, X., Yang, C., Yin, Y., Ye, H., Li, N., & Guo, Y. (2017) · Advanced Materials · doi:10.1002/adma.201700389 · Cited by 579
Wood, K. N., Noked, M., & Dasgupta, N. P. (2017) · ACS Energy Letters · doi:10.1021/acsenergylett.6b00650 · Cited by 558
Advanced Micro/Nanostructures for Lithium Metal Anodes
Zhang, R., Li, N., Cheng, X., Yin, Y., Zhang, Q., & Guo, Y. (2017) · Advanced Science · doi:10.1002/advs.201600445 · Cited by 549
Self-citationTowards High‐Safe Lithium Metal Anodes: Suppressing Lithium Dendrites via Tuning Surface Energy
Wang, D., Zhang, W., Zheng, W., Cui, X., Rojo, T., & Zhang, Q. (2017) · Advanced Science · doi:10.1002/advs.201600168 · Cited by 548
Self-citationImplantable Solid Electrolyte Interphase in Lithium-Metal Batteries
Cheng, X.-B., Yan, C., Chen, X., Guan, C., Huang, J.-Q., Peng, H.-J., Zhang, R., Yang, S.-T., & Zhang, Q. (2017) · Chem · doi:10.1016/j.chempr.2017.01.003 · Cited by 524
Self-citationNanostructured energy materials for electrochemical energy conversion and storage: A review
Zhang, X., Cheng, X., & Zhang, Q. (2016) · Journal of Energy Chemistry · doi:10.1016/j.jechem.2016.11.003 · Cited by 516
Self-citationImproved cycling performances of lithium sulfur batteries with LiNO3-modified electrolyte
Liang, X. M., Wen, Z., Liu, Y., Wu, M., Jin, J. H., Zhang, H., & Wu, X. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.08.027 · Cited by 506
Anodes for Rechargeable Lithium‐Sulfur Batteries
Cao, R., Xu, W., Lv, D., Xiao, J., & Zhang, J. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201402273 · Cited by 502
Markevich, E., Salitra, G., & Aurbach, D. (2017) · ACS Energy Letters · doi:10.1021/acsenergylett.7b00163 · Cited by 502
3D lithium metal embedded within lithiophilic porous matrix for stable lithium metal batteries
Jin, C., Sheng, O., Luo, J., Yuan, H., Fang, C., Zhang, W., Huang, H., Gan, Y., Xia, Y., Liang, C., et al. (2017) · Nano Energy · doi:10.1016/j.nanoen.2017.05.015 · Cited by 501
Stable Li Metal Anodes via Regulating Lithium Plating/Stripping in Vertically Aligned Microchannels
Wang, S., Yin, Y., Zuo, T., Dong, W., Li, J., Shi, J., Zhang, C., Li, N., Li, C., & Guo, Y. (2017) · Advanced Materials · doi:10.1002/adma.201703729 · Cited by 484
Artificial Protection Film on Lithium Metal Anode toward Long‐Cycle‐Life Lithium–Oxygen Batteries
Liu, Q., Xu, J., Yuan, S., Chang, Z., Xu, D., Yin, Y., Li, L., Zhong, H., Jiang, Y., Yan, J., et al. (2015) · Advanced Materials · doi:10.1002/adma.201501490 · Cited by 482
The Electrochemical Decomposition of Propylene Carbonate on Graphite
Dey, A. N., & Sullivan, B. P. (1970) · Journal of The Electrochemical Society · doi:10.1149/1.2407470 · Cited by 479
Air-stable and freestanding lithium alloy/graphene foil as an alternative to lithium metal anodes
Zhao, J., Zhou, G., Yan, K., Xie, J., Li, Y., Liao, L., Jin, Y., Liu, K., Hsu, P.-C., Wang, J., et al. (2017) · Nature Nanotechnology · doi:10.1038/nnano.2017.129 · Cited by 468
Lin, D., Liu, Y., Chen, W., Zhou, G., Liu, K., Dunn, B., & Cui, Y. (2017) · Nano Letters · doi:10.1021/acs.nanolett.7b01020 · Cited by 465
Making Li-metal electrodes rechargeable by controlling the dendrite growth direction
Liu, Y., Liu, Q., Xin, L., Liu, Y., Yang, F., Stach, E. A., & Xie, J. (2017) · Nature Energy · doi:10.1038/nenergy.2017.83 · Cited by 464
Zeng, X.-X., Yin, Y.-X., Li, N.-W., Du, W.-C., Guo, Y.-G., & Wan, L.-J. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.6b10088 · Cited by 459
Ye, H., Xin, S., Yin, Y.-X., Li, J.-Y., Guo, Y.-G., & Wan, L.-J. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.7b01763 · Cited by 451
Phosphorous Pentasulfide as a Novel Additive for High‐Performance Lithium‐Sulfur Batteries
Lin, Z., Liu, Z., Fu, W., Dudney, N. J., & Liang, C. (2013) · Advanced Functional Materials · doi:10.1002/adfm.201200696 · Cited by 450
Burning lithium in CS2 for high-performing compact Li2S–graphene nanocapsules for Li–S batteries
Tan, G., Xu, R., Xing, Z., Yuan, Y., Lu, J., Wen, J., Liu, C., Ma, L., Zhan, C., Liu, Q., et al. (2017) · Nature Energy · doi:10.1038/nenergy.2017.90 · Cited by 444
Xiong, S., Xie, K., Diao, Y., & Hong, X. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.08.041 · Cited by 414
Carbon Materials for Lithium Sulfur Batteries—Ten Critical Questions
Borchardt, L., Oschatz, M., & Kaskel, S. (2016) · Chemistry – A European Journal · doi:10.1002/chem.201600040 · Cited by 414
Nanodiamonds suppress the growth of lithium dendrites
Cheng, X.-B., Zhao, M.-Q., Chen, C., Pentecost, A., Maleski, K., Mathis, T., Zhang, X.-Q., Zhang, Q., Jiang, J., & Gogotsi, Y. (2017) · Nature Communications · doi:10.1038/s41467-017-00519-2 · Cited by 401
Self-citationLithium–sulfur batteries: from liquid to solid cells
Lin, Z., & Liang, C. (2015) · Journal of Materials Chemistry A · doi:10.1039/c4ta04727c · Cited by 399
Cheng, X.-B., Yan, C., Huang, J.-Q., Li, P., Zhu, L., Zhao, L., Zhang, Y., Zhu, W., Yang, S.-T., & Zhang, Q. (2017) · Energy Storage Materials · doi:10.1016/j.ensm.2016.09.003 · Cited by 394
Self-citationA lithium anode protection guided highly-stable lithium–sulfur battery
Ma, G., Wen, Z., Wu, M., Shen, C., Wang, Q., Jin, J., & Wu, X. (2014) · Chem. Commun. · doi:10.1039/c4cc05535g · Cited by 382
Miao, R., Yang, J., Feng, X., Jia, H., Wang, J., & Nuli, Y. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.08.011 · Cited by 361
Peng, H., Wang, D., Huang, J., Cheng, X., Yuan, Z., Wei, F., & Zhang, Q. (2016) · Advanced Science · doi:10.1002/advs.201500268 · Cited by 348
Self-citationZhuang, T., Huang, J., Peng, H., He, L., Cheng, X., Chen, C., & Zhang, Q. (2016) · Small · doi:10.1002/smll.201503133 · Cited by 346
Self-citationManipulating surface reactions in lithium–sulphur batteries using hybrid anode structures
Huang, C., Xiao, J., Shao, Y., Zheng, J., Bennett, W. D., Lu, D., Saraf, L. V., Engelhard, M., Ji, L., Zhang, J., et al. (2014) · Nature Communications · doi:10.1038/ncomms4015 · Cited by 343
High-Performance Lithium Metal Negative Electrode with a Soft and Flowable Polymer Coating
Zheng, G., Wang, C., Pei, A., Lopez, J., Shi, F., Chen, Z., Sendek, A. D., Lee, H.-W., Lu, Z., Schneider, H., et al. (2016) · ACS Energy Letters · doi:10.1021/acsenergylett.6b00456 · Cited by 328
Pang, Q., Liang, X., Kwok, C. Y., & Nazar, L. F. (2015) · Journal of The Electrochemical Society · doi:10.1149/2.0171514jes · Cited by 323
Cheng, X.-B., Peng, H.-J., Huang, J.-Q., Zhang, R., Zhao, C.-Z., & Zhang, Q. (2015) · ACS Nano · doi:10.1021/acsnano.5b01990 · Cited by 321
Self-citationGraphite-Encapsulated Li-Metal Hybrid Anodes for High-Capacity Li Batteries
Sun, Y., Zheng, G., Seh, Z. W., Liu, N., Wang, S., Sun, J., Lee, H. R., & Cui, Y. (2016) · Chem · doi:10.1016/j.chempr.2016.07.009 · Cited by 305
Anode Improvement in Rechargeable Lithium–Sulfur Batteries
Tao, T., Lu, S., Fan, Y., Lei, W., Huang, S., & Chen, Y. (2017) · Advanced Materials · doi:10.1002/adma.201700542 · Cited by 304
3D TiC/C Core/Shell Nanowire Skeleton for Dendrite‐Free and Long‐Life Lithium Metal Anode
Liu, S., Xia, X., Zhong, Y., Deng, S., Yao, Z., Zhang, L., Cheng, X., Wang, X., Zhang, Q., & Tu, J. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201702322 · Cited by 292
Self-citationChung, S., Chang, C., & Manthiram, A. (2016) · ACS Nano · doi:10.1021/acsnano.6b06369 · Cited by 282
Rechargeable Batteries: Grasping for the Limits of Chemistry
Berg, E. J., Villevieille, C., Streich, D., Trabesinger, S., & Novák, P. (2015) · Journal of The Electrochemical Society · doi:10.1149/2.0081514jes · Cited by 270
The interplay between solid electrolyte interface (SEI) and dendritic lithium growth
Wu, B., Lochala, J., Taverne, T., & Xiao, J. (2017) · Nano Energy · doi:10.1016/j.nanoen.2017.08.005 · Cited by 262
Advanced Porous Carbon Materials for High‐Efficient Lithium Metal Anodes
Ye, H., Xin, S., Yin, Y., & Guo, Y. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201700530 · Cited by 261
Li 2 S 5 -based ternary-salt electrolyte for robust lithium metal anode
Zhao, C.-Z., Cheng, X.-B., Zhang, R., Peng, H.-J., Huang, J.-Q., Ran, R., Huang, Z.-H., Wei, F., & Zhang, Q. (2016) · Energy Storage Materials · doi:10.1016/j.ensm.2016.01.007 · Cited by 260
Self-citationA Toolbox for Lithium–Sulfur Battery Research: Methods and Protocols
Zhang, G., Zhang, Z., Peng, H., Huang, J., & Zhang, Q. (2017) · Small Methods · doi:10.1002/smtd.201700134 · Cited by 260
Self-citationDuan, H., Yin, Y.-X., Zeng, X.-X., Li, J.-Y., Shi, J.-L., Shi, Y., Wen, R., Guo, Y.-G., & Wan, L.-J. (2018) · Energy Storage Materials · doi:10.1016/j.ensm.2017.06.017 · Cited by 260
Sulfurized solid electrolyte interphases with a rapid Li+ diffusion on dendrite-free Li metal anodes
Cheng, X.-B., Yan, C., Peng, H.-J., Huang, J.-Q., Yang, S.-T., & Zhang, Q. (2018) · Energy Storage Materials · doi:10.1016/j.ensm.2017.03.008 · Cited by 257
Self-citationYan, C., Cheng, X.-B., Zhao, C.-Z., Huang, J.-Q., Yang, S.-T., & Zhang, Q. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.07.056 · Cited by 255
Self-citationA carbon-based 3D current collector with surface protection for Li metal anode
Zhang, Y., Liu, B., Hitz, E., Luo, W., Yao, Y., Li, Y., Dai, J., Chen, C., Wang, Y., Yang, C., et al. (2017) · Nano Research · doi:10.1007/s12274-017-1461-2 · Cited by 252
Zhang, L., Ling, M., Feng, J., Mai, L., Liu, G., & Guo, J. (2018) · Energy Storage Materials · doi:10.1016/j.ensm.2017.09.001 · Cited by 251
Wang, H., Lin, D., Liu, Y., Li, Y., & Cui, Y. (2017) · Science Advances · doi:10.1126/sciadv.1701301 · Cited by 244
Zhang, X., Chen, X., Xu, R., Cheng, X., Peng, H., Zhang, R., Huang, J., & Zhang, Q. (2017) · Angewandte Chemie International Edition · doi:10.1002/anie.201707093 · Cited by 231
Self-citationA Lithium‐Sulfur Battery with a High Areal Energy Density
Kim, J., Hwang, T. H., Kim, B. G., Min, J., & Choi, J. W. (2014) · Advanced Functional Materials · doi:10.1002/adfm.201400935 · Cited by 230
Long lifespan lithium metal anodes enabled by Al2O3 sputter coating
Wang, L., Zhang, L., Wang, Q., Li, W., Wu, B., Jia, W., Wang, Y., Li, J., & Li, H. (2018) · Energy Storage Materials · doi:10.1016/j.ensm.2017.08.001 · Cited by 229
Xiang, H., Shi, P., Bhattacharya, P., Chen, X., Mei, D., Bowden, M. E., Zheng, J., Zhang, J.-G., & Xu, W. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.04.017 · Cited by 225
Peng, H.-J., Huang, J.-Q., Liu, X.-Y., Cheng, X.-B., Xu, W.-T., Zhao, C.-Z., Wei, F., & Zhang, Q. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.6b12358 · Cited by 224
Self-citationProtected lithium anode with porous Al2O3layer for lithium–sulfur battery
Jing, H.-K., Kong, L.-L., Liu, S., Li, G.-R., & Gao, X.-P. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta01490e · Cited by 220
Jin, S., Xin, S., Wang, L., Du, Z., Cao, L., Chen, J., Kong, X., Gong, M., Lu, J., Zhu, Y., et al. (2016) · Advanced Materials · doi:10.1002/adma.201602704 · Cited by 216
Chen, X., Hou, T.-Z., Li, B., Yan, C., Zhu, L., Guan, C., Cheng, X.-B., Peng, H.-J., Huang, J.-Q., & Zhang, Q. (2017) · Energy Storage Materials · doi:10.1016/j.ensm.2017.01.003 · Cited by 216
Self-citationYe, H., Yin, Y.-X., Zhang, S.-F., Shi, Y., Liu, L., Zeng, X.-X., Wen, R., Guo, Y.-G., & Wan, L.-J. (2017) · Nano Energy · doi:10.1016/j.nanoen.2017.04.056 · Cited by 205
Pan, H., Wei, X., Henderson, W. A., Shao, Y., Chen, J., Bhattacharya, P., Xiao, J., & Liu, J. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201500113 · Cited by 196
Lithium Batteries with Nearly Maximum Metal Storage
Raji, A.-R. O., Villegas Salvatierra, R., Kim, N. D., Fan, X., Li, Y., Silva, G. A. L., Sha, J., & Tour, J. M. (2017) · ACS Nano · doi:10.1021/acsnano.7b02731 · Cited by 196
Chang, C.-H., Chung, S.-H., & Manthiram, A. (2016) · Small · doi:10.1002/smll.201502505 · Cited by 194
Zhang, Z., Zhao, Y., Chen, S., Xie, D., Yao, X., Cui, P., & Xu, X. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta04320a · Cited by 194
Electroless Formation of Hybrid Lithium Anodes for Fast Interfacial Ion Transport
Choudhury, S., Tu, Z., Stalin, S., Vu, D., Fawole, K., Gunceler, D., Sundararaman, R., & Archer, L. A. (2017) · Angewandte Chemie International Edition · doi:10.1002/anie.201707754 · Cited by 183
Liu, S., Li, G.-R., & Gao, X.-P. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b12231 · Cited by 177
Jin, S., Sun, Z., Guo, Y., Qi, Z., Guo, C., Kong, X., Zhu, Y., & Ji, H. (2017) · Advanced Materials · doi:10.1002/adma.201700783 · Cited by 172
Lu, L.-L., Zhang, Y., Pan, Z., Yao, H.-B., Zhou, F., & Yu, S.-H. (2017) · Energy Storage Materials · doi:10.1016/j.ensm.2017.06.004 · Cited by 170
Ji, X., Liu, D.-Y., Prendiville, D. G., Zhang, Y., Liu, X., & Stucky, G. D. (2012) · Nano Today · doi:10.1016/j.nantod.2011.11.002 · Cited by 169
Hao, G., Tang, C., Zhang, E., Zhai, P., Yin, J., Zhu, W., Zhang, Q., & Kaskel, S. (2017) · Advanced Materials · doi:10.1002/adma.201702829 · Cited by 169
Self-citationStabilized Lithium–Metal Surface in a Polysulfide-Rich Environment of Lithium–Sulfur Batteries
Zu, C., & Manthiram, A. (2014) · The Journal of Physical Chemistry Letters · doi:10.1021/jz501352e · Cited by 164
A Quinonoid‐Imine‐Enriched Nanostructured Polymer Mediator for Lithium–Sulfur Batteries
Chen, C., Peng, H., Hou, T., Zhai, P., Li, B., Tang, C., Zhu, W., Huang, J., & Zhang, Q. (2017) · Advanced Materials · doi:10.1002/adma.201606802 · Cited by 164
Self-citationProgress of rechargeable lithium metal batteries based on conversion reactions
Xin, S., Chang, Z., Zhang, X., & Guo, Y. (2016) · National Science Review · doi:10.1093/nsr/nww078 · Cited by 158
Sheng, O., Jin, C., Luo, J., Yuan, H., Fang, C., Huang, H., Gan, Y., Zhang, J., Xia, Y., Liang, C., et al. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta03699j · Cited by 151
Jia, W., Fan, C., Wang, L., Wang, Q., Zhao, M., Zhou, A., & Li, J. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b03897 · Cited by 150
Polymer-Rich Composite Electrolytes for All-Solid-State Li–S Cells
Júdez, X., Zhang, H., Li, C., Eshetu, G. G., Zhang, Y., González-Marcos, J. A., Armand, M. B., & Rodrı́guez-Martı́nez, L. M. (2017) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.7b01321 · Cited by 135
Kaiser, M. R., Chou, S., Liu, H., Dou, S. X., Wang, C., & Wang, J. (2017) · Advanced Materials · doi:10.1002/adma.201700449 · Cited by 134
Carbon enables the practical use of lithium metal in a battery
Zhang, C., Huang, Z., Lv, W. Z., Yun, Q., Kang, F., & Yang, Q. (2017) · Carbon · doi:10.1016/j.carbon.2017.08.027 · Cited by 117
Research Progress toward the Practical Applications of Lithium–Sulfur Batteries
Lochala, J. A., Liu, D., Wu, B., Robinson, C., & Xiao, J. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b06208 · Cited by 115
Xu, G., Yan, Q., Wang, S., Kushima, A., Bai, P., Liu, K., Zhang, X., Tang, Z., & Li, J. (2017) · Chemical Science · doi:10.1039/c7sc01961k · Cited by 103
Li2S Film Formation on Lithium Anode Surface of Li–S batteries
Liu, Z., Bertolini, S., Balbuena, P. B., & Mukherjee, P. P. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b11803 · Cited by 93
Lee, H., Song, J., Kim, Y., Park, J.-K., & Kim, H. (2016) · Scientific Reports · doi:10.1038/srep30830 · Cited by 93
Breaking Down the Crystallinity: The Path for Advanced Lithium Batteries
Zu, C., Dolocan, A., Xiao, P., Stauffer, S. K., Henkelman, G., & Manthiram, A. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201501933 · Cited by 84
Peng, Z., Wang, S., Zhou, J., Jin, Y., Liu, Y., Qin, Y., Shen, C., Han, W., & Wang, D. (2016) · Journal of Materials Chemistry A · doi:10.1039/c5ta10050j · Cited by 82
Peled, E., Goor, M., Schektman, I., Mukra, T., Shoval, Y., & Golodnitsky, D. (2016) · Journal of The Electrochemical Society · doi:10.1149/2.0161701jes · Cited by 77
Matsuda, S., Kubo, Y., Uosaki, K., & Nakanishi, S. (2017) · Carbon · doi:10.1016/j.carbon.2017.04.032 · Cited by 75
Few-Layer Graphene Island Seeding for Dendrite-Free Li Metal Electrodes
Kang, H.-K., Woo, S., Kim, J., Yu, J., Lee, S.-R., & Kim, Y. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b09757 · Cited by 68
Taiwo, O. O., Finegan, D. P., Paz-García, J. M., Eastwood, D. S., Bodey, A. J., Rau, C., Hall, S. A., Brett, D. J. L., Lee, P. D., & Shearing, P. R. (2017) · Physical Chemistry Chemical Physics · doi:10.1039/c7cp02872e · Cited by 66
Lee, J. H., Song, J., Lee, H., et al. (2017) · ACS Energy Letters · doi:10.1021/acsenergylett.7b00289 · Cited by 57
Recent development in lithium metal anodes of liquid-state rechargeable batteries
Liu, S., Wang, X., Xie, D., Xia, X. H., Gu, C., Wu, J., & Tu, J. P. (2017) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2017.09.204 · Cited by 52
Dendrite-Free Lithium Deposition for Lithium Metal Anodes with Interconnected Microsphere Protection
Lee, Y.-G., Ryu, S., Sugimoto, T., Yu, T.-H., Chang, W.-S., Yang, Y., Jung, C., Woo, J., Kang, S. G., Han, H. N., et al. (2017) · Chemistry of Materials · doi:10.1021/acs.chemmater.7b01304 · Cited by 50
Pre-planted nucleation seeds for rechargeable metallic lithium anodes
Liu, Y., Li, B., Liu, J., Li, S., & Yang, S. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta04932c · Cited by 31
Cited by
Batteries and fuel cells for emerging electric vehicle markets
Cano, Z. P., Banham, D., Ye, S., Hintennach, A., Lu, J., Fowler, M., & Chen, Z. (2018) · Nature Energy · doi:10.1038/s41560-018-0108-1 · Cited by 2,873
Recent Advances in Energy Chemistry between Solid-State Electrolyte and Safe Lithium-Metal Anodes
Cheng, X.-B., Zhao, C.-Z., Yao, Y.-X., Liu, H., & Zhang, Q. (2019) · Chem · doi:10.1016/j.chempr.2018.12.002 · Cited by 874
Self-citationFluorinated solid electrolyte interphase enables highly reversible solid-state Li metal battery
Fan, X., Ji, X., Han, F., Yue, J., Chen, J., Chen, L., Deng, T., Jiang, J., & Wang, C. (2018) · Science Advances · doi:10.1126/sciadv.aau9245 · Cited by 838
Artificial Interphases for Highly Stable Lithium Metal Anode
Xu, R., Cheng, X.-B., Yan, C., Zhang, X.-Q., Xiao, Y., Zhao, C.-Z., Huang, J.-Q., & Zhang, Q. (2019) · Matter · doi:10.1016/j.matt.2019.05.016 · Cited by 721
Self-citationFluorinated Solid-Electrolyte Interphase in High-Voltage Lithium Metal Batteries
Li, T., Zhang, X.-Q., Shi, P., & Zhang, Q. (2019) · Joule · doi:10.1016/j.joule.2019.09.022 · Cited by 714
Self-citation
Metadata
- Authors
- Cheng, X.-B., Huang, J.-Q., & Zhang, Q.
- Venue
- Journal of The Electrochemical Society
- Publisher
- The Electrochemical Society
- Published
- 2017-11-07
- Volume
- 165
- Issue
- 1
- Pages
- A6058-A6072
- ISSN
- 0013-4651 (ISSN-L)
- 1945-7111
- OpenAlex
- W2767731419
- Cited by
- 277
- References
- 158
- FWCI
- 13.54
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.