The DOI matches its Crossref record; 192 of the 192 references it cites were found in a registry or an index.
The Overview of Porous, Bioactive Scaffolds as Instructive Biomaterials for Tissue Regeneration and Their Clinical Translation
Open accessAbstract
Porous scaffolds have been employed for decades in the biomedical field where researchers have been seeking to produce an environment which could approach one of the extracellular matrixes supporting cells in natural tissues. Such three-dimensional systems offer many degrees of freedom to modulate cell activity, ranging from the chemistry of the structure and the architectural properties such as the porosity, the pore, and interconnection size. All these features can be exploited synergistically to tailor the cell–material interactions, and further, the tissue growth within the voids of the scaffold. Herein, an overview of the materials employed to generate porous scaffolds as well as the various techniques that are used to process them is supplied. Furthermore, scaffold parameters which modulate cell behavior are identified under distinct aspects: the architecture of inert scaffolds (i.e., pore and interconnection size, porosity, mechanical properties, etc.) alone on cell functions followed by comparison with bioactive scaffolds to grasp the most relevant features driving tissue regeneration. Finally, in vivo outcomes are highlighted comparing the accordance between in vitro and in vivo results in order to tackle the future translational challenges in tissue repair and regeneration.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Matrix elasticity directs stem cell lineage specification
Engler, A. J., Sen, S., Sweeney, H. L., & Discher, D. E. (2006) · Cell · doi:10.1016/j.cell.2006.06.044 · Cited by 13,915
Langer, R., & Vacanti, J. P. (1993) · Science · doi:10.1126/science.8493529 · Cited by 9,893
Cellular solids structure and properties
Gibson, L. J., Ashby, M. F., et al. (1997) · Cited by 9,172
Molecular Mechanisms of Stress-Responsive Changes in Collagen and Elastin Networks in Skin
Aziz, J., Shezali, H., Radzi, Z., Yahya, N. A., Abu Kassim, N. H., Czernuszka, J., & Rahman, M. T. (2016) · Skin Pharmacology and Physiology · doi:10.1159/000447017 · Cited by 7,323
Rubinstein, M., & Colby, R. H. (2003) · doi:10.1093/oso/9780198520597.001.0001 · Cited by 5,686
Foreign body reaction to biomaterials
Anderson, J. M., Rodriguez, A., & Chang, D. T. (2008) · Seminars in Immunology · doi:10.1016/j.smim.2007.11.004 · Cited by 5,138 · cited 1×
“In vivo outcomes also support these trends since implanted sca ff olds are often filled with scar tissues with low functionality and as a consequence of the foreign body reaction [239].”
BackgroundLehn, J. (1988) · Angewandte Chemie International Edition in English · doi:10.1002/anie.198800891 · Cited by 3,856
Biodegradable and bioactive porous polymer/inorganic composite scaffolds for bone tissue engineering
Rezwan, K., Chen, Q. Z., Blaker, J. J., & Boccaccini, A. R. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2006.01.039 · Cited by 3,839
Surface modification of titanium, titanium alloys, and related materials for biomedical applications
LIU, X., CHU, P., & DING, C. (2004) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2004.11.001 · Cited by 3,487
Biomedical applications of hydrogels: A review of patents and commercial products
Caló, E., & Khutoryanskiy, V. V. (2015) · European Polymer Journal · doi:10.1016/j.eurpolymj.2014.11.024 · Cited by 2,634
Hench, L. L. (2006) · Journal of Materials Science: Materials in Medicine · doi:10.1007/s10856-006-0432-z · Cited by 2,505
Hydrogels with tunable stress relaxation regulate stem cell fate and activity
Chaudhuri, O., Gu, L., Klumpers, D., Darnell, M., Bencherif, S. A., Weaver, J. C., Huebsch, N., Lee, H.-P., Lippens, E., Duda, G. N., et al. (2016) · Nature Materials · doi:10.1038/nmat4489 · Cited by 2,443
The Wound Healing Process: An Overview of the Cellular and Molecular Mechanisms
Velnar, T., Bailey, T., & Smrkolj, V (2009) · Journal of International Medical Research · doi:10.1177/147323000903700531 · Cited by 2,442
Zheng, Y. F., Gu, X. N., & Witte, F. (2014) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2014.01.001 · Cited by 2,436
The control of human mesenchymal cell differentiation using nanoscale symmetry and disorder
Dalby, M. J., Gadegaard, N., Tare, R., Andar, A., Riehle, M. O., Herzyk, P., Wilkinson, C. D. W., & Oreffo, R. O. C. (2007) · Nature Materials · doi:10.1038/nmat2013 · Cited by 2,416
Mechanotransduction and extracellular matrix homeostasis
Humphrey, J. D., Dufresne, E. R., & Schwartz, M. A. (2014) · Nature Reviews Molecular Cell Biology · doi:10.1038/nrm3896 · Cited by 2,124
Biomedical applications of collagen
Lee, C. H., Singla, A., & Lee, Y. (2001) · International Journal of Pharmaceutics · doi:10.1016/s0378-5173(01)00691-3 · Cited by 1,945
Bone tissue engineering using 3D printing
Bose, S., Vahabzadeh, S., & Bandyopadhyay, A. (2013) · Materials Today · doi:10.1016/j.mattod.2013.11.017 · Cited by 1,866
Haider, A., Haider, S., & Kang, I.-K. (2018) · Arabian Journal of Chemistry · doi:10.1016/j.arabjc.2015.11.015 · Cited by 1,861
Use of electrospinning technique for biomedical applications
Agarwal, S., Wendorff, J. H., & Greiner, A. (2008) · Polymer · doi:10.1016/j.polymer.2008.09.014 · Cited by 1,822
Metal Fabrication by Additive Manufacturing Using Laser and Electron Beam Melting Technologies
Murr, L. E., Gaytan, S. M., Ramirez, D. A., Martinez, E., Hernandez, J., Amato, K. N., Shindo, P. W., Medina, F. R., & Wicker, R. B. (2012) · Journal of Materials Science & Technology · doi:10.1016/s1005-0302(12)60016-4 · Cited by 1,686
An overview of nitinol medical applications
Duerig, T., Pelton, A., & Stöckel, D. (1999) · Materials Science and Engineering: A · doi:10.1016/s0921-5093(99)00294-4 · Cited by 1,628
Webber, M. J., Appel, E. A., Meijer, E. W., & Langer, R. (2016) · Nature Materials · doi:10.1038/nmat4474 · Cited by 1,605
COLLAGEN SUBSTRATA FOR STUDIES ON CELL BEHAVIOR
Elsdale, T., & Bard, J. (1972) · The Journal of Cell Biology · doi:10.1083/jcb.54.3.626 · Cited by 1,525
Malafaya, P. B., Silva, G. A., & Reis, R. L. (2007) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2007.03.012 · Cited by 1,401
Fundamentals and applications of 3D printing for novel materials
Lee, J.-Y., An, J., & Chua, C. K. (2017) · Applied Materials Today · doi:10.1016/j.apmt.2017.02.004 · Cited by 1,354
Kenawy, E.-R., Bowlin, G. L., Mansfield, K., Layman, J., Simpson, D. G., Sanders, E. H., & Wnek, G. E. (2002) · Journal of Controlled Release · doi:10.1016/s0168-3659(02)00041-x · Cited by 1,311
Additive manufacturing of tissues and organs
Melchels, F. P. W., Domingos, M. A. N., Klein, T. J., Malda, J., Bartolo, P. J., & Hutmacher, D. W. (2012) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2011.11.007 · Cited by 1,213
Kisiday, J., Jin, M., Kurz, B., Hung, H., Semino, C., Zhang, S., & Grodzinsky, A. J. (2002) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.142309999 · Cited by 1,045
Three-Dimensional Cell Culture: A Breakthrough in Vivo
Antoni, D., Burckel, H., Josset, E., & Noel, G. (2015) · International Journal of Molecular Sciences · doi:10.3390/ijms16035517 · Cited by 990
Teng, Y. D., Lavik, E. B., Qu, X., Park, K. I., Ourednik, J., Zurakowski, D., Langer, R., & Snyder, E. Y. (2002) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.052678899 · Cited by 966
Bobbert, F. S. L., Lietaert, K., Eftekhari, A. A., Pouran, B., Ahmadi, S. M., Weinans, H., & Zadpoor, A. A. (2017) · Acta Biomaterialia · doi:10.1016/j.actbio.2017.02.024 · Cited by 873
Scaffolds and cells for tissue regeneration: different scaffold pore sizes—different cell effects
Bružauskaitė, I., Bironaitė, D., Bagdonas, E., & Bernotienė, E. (2016) · Cytotechnology · doi:10.1007/s10616-015-9895-4 · Cited by 797
Ellis-Behnke, R. G., Liang, Y.-X., You, S.-W., Tay, D. K. C., Zhang, S., So, K.-F., & Schneider, G. E. (2006) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.0600559103 · Cited by 796
Exploring the sequence space for (tri-)peptide self-assembly to design and discover new hydrogels
Frederix, P. W. J. M., Scott, G. G., Abul-Haija, Y. M., Kalafatovic, D., Pappas, C. G., Javid, N., Hunt, N. T., Ulijn, R. V., & Tuttle, T. (2015) · Nature Chemistry · doi:10.1038/nchem.2122 · Cited by 774
Gerecht, S., Burdick, J. A., Ferreira, L. S., Townsend, S. A., Langer, R., & Vunjak-Novakovic, G. (2007) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.0703723104 · Cited by 664
Proangiogenic scaffolds as functional templates for cardiac tissue engineering
Madden, L. R., Mortisen, D. J., Sussman, E. M., Dupras, S. K., Fugate, J. A., Cuy, J. L., Hauch, K. D., Laflamme, M. A., Murry, C. E., & Ratner, B. D. (2010) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1006442107 · Cited by 662
Nanogels and Microgels: From Model Colloids to Applications, Recent Developments, and Future Trends
Karg, M., Pich, A., Hellweg, T., Hoare, T., Lyon, L. A., Crassous, J. J., Suzuki, D., Gumerov, R. A., Schneider, S., Potemkin, I. I., et al. (2019) · Langmuir · doi:10.1021/acs.langmuir.8b04304 · Cited by 658
A review on biodegradable polymeric materials for bone tissue engineering applications
Sabir, M. I., Xu, X., & Li, L. (2009) · Journal of Materials Science · doi:10.1007/s10853-009-3770-7 · Cited by 645
Developing a pro-regenerative biomaterial scaffold microenvironment requires T helper 2 cells
Sadtler, K., Estrellas, K., Allen, B. W., Wolf, M. T., Fan, H., Tam, A. J., Patel, C. H., Luber, B. S., Wang, H., Wagner, K. R., et al. (2016) · Science · doi:10.1126/science.aad9272 · Cited by 605
Arginyl-glycyl-aspartic acid (RGD): a cell adhesion motif
D'Souza, S. E., Ginsberg, M. H., & Plow, E. F. (1991) · Trends in Biochemical Sciences · doi:10.1016/0968-0004(91)90096-e · Cited by 605
Photocrosslinked alginate hydrogels with tunable biodegradation rates and mechanical properties
Jeon, O., Bouhadir, K. H., Mansour, J. M., & Alsberg, E. (2009) · Biomaterials · doi:10.1016/j.biomaterials.2009.01.034 · Cited by 592
Surface modification and property analysis of biomedical polymers used for tissue engineering
Ma, Z., Mao, Z., & Gao, C. (2007) · Colloids and Surfaces B: Biointerfaces · doi:10.1016/j.colsurfb.2007.06.019 · Cited by 590
Thermal Inkjet Printing in Tissue Engineering and Regenerative Medicine
Cui, X., Boland, T., D.D'Lima, D., & K. Lotz, M. (2012) · Recent Patents on Drug Delivery & Formulation · doi:10.2174/187221112800672949 · Cited by 581
Patel, Z. S., Young, S., Tabata, Y., Jansen, J. A., Wong, M. E. K., & Mikos, A. G. (2008) · Bone · doi:10.1016/j.bone.2008.06.019 · Cited by 580
Opportunities and challenges of translational 3D bioprinting
Murphy, S. V., De Coppi, P., & Atala, A. (2019) · Nature Biomedical Engineering · doi:10.1038/s41551-019-0471-7 · Cited by 563
Sobral, J. M., Caridade, S. G., Sousa, R. A., Mano, J. F., & Reis, R. L. (2011) · Acta Biomaterialia · doi:10.1016/j.actbio.2010.11.003 · Cited by 561
Biosynthetic hydrogel scaffolds made from fibrinogen and polyethylene glycol for 3D cell cultures
Almany, L., & Seliktar, D. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2004.06.047 · Cited by 551
The effect of geometry on three-dimensional tissue growth
Rumpler, M., Woesz, A., Dunlop, J. W. C., van Dongen, J. T., & Fratzl, P. (2008) · Journal of The Royal Society Interface · doi:10.1098/rsif.2008.0064 · Cited by 531
Current status of prosthetic bypass grafts: A review
Kannan, R. Y., Salacinski, H. J., Butler, P. E., Hamilton, G., & Seifalian, A. M. (2005) · Journal of Biomedical Materials Research Part B: Applied Biomaterials · doi:10.1002/jbm.b.30247 · Cited by 527
Bone tissue regeneration: the role of scaffold geometry
Zadpoor, A. A. (2015) · Biomaterials Science · doi:10.1039/c4bm00291a · Cited by 518
Biomedical Applications of Biodegradable Polyesters
Manavitehrani, I., Fathi, A., Badr, H., Daly, S., Negahi Shirazi, A., & Dehghani, F. (2016) · Polymers · doi:10.3390/polym8010020 · Cited by 514
Surface micropatterning to regulate cell functions
Ito, Y. (1999) · Biomaterials · doi:10.1016/s0142-9612(99)00162-3 · Cited by 500
3D Cell Culture in Alginate Hydrogels
Andersen, T., Auk-Emblem, P., & Dornish, M. (2015) · Microarrays · doi:10.3390/microarrays4020133 · Cited by 472
In vitro dissolution of melt‐derived 45S5 and sol‐gel derived 58S bioactive glasses
Sepulveda, P., Jones, J. R., & Hench, L. L. (2002) · Journal of Biomedical Materials Research · doi:10.1002/jbm.10207 · Cited by 470
Effect of the nano/microscale structure of biomaterial scaffolds on bone regeneration
Zhu, L., Luo, D., & Liu, Y. (2020) · International Journal of Oral Science · doi:10.1038/s41368-020-0073-y · Cited by 458
Karande, T. S., Ong, J. L., & Agrawal, C. M. (2004) · Annals of Biomedical Engineering · doi:10.1007/s10439-004-7825-2 · Cited by 457
A modular and supramolecular approach to bioactive scaffolds for tissue engineering
Dankers, P. Y. W., Harmsen, M. C., Brouwer, L. A., Van Luyn, M. J. A., & Meijer, E. W. (2005) · Nature Materials · doi:10.1038/nmat1418 · Cited by 455
Sussman, E. M., Halpin, M. C., Muster, J., Moon, R. T., & Ratner, B. D. (2014) · Annals of Biomedical Engineering · doi:10.1007/s10439-013-0933-0 · Cited by 416
McKinnon, D. D., Domaille, D. W., Cha, J. N., & Anseth, K. S. (2014) · Advanced Materials · doi:10.1002/adma.201303680 · Cited by 414
Loebel, C., Mauck, R. L., & Burdick, J. A. (2019) · Nature Materials · doi:10.1038/s41563-019-0307-6 · Cited by 402
3D Printing of Multifunctional Hydrogels
Chen, Z., Zhao, D., Liu, B., Nian, G., Li, X., Yin, J., Qu, S., & Yang, W. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201900971 · Cited by 398
A cell-laden microfluidic hydrogel
Ling, Y., Rubin, J., Deng, Y., Huang, C., Demirci, U., Karp, J. M., & Khademhosseini, A. (2007) · Lab on a Chip · doi:10.1039/b615486g · Cited by 395
Salt Fusion: An Approach to Improve Pore Interconnectivity within Tissue Engineering Scaffolds
Murphy, W. L., Dennis, R. G., Kileny, J. L., & Mooney, D. J. (2002) · Tissue Engineering · doi:10.1089/107632702753503045 · Cited by 392
Yang, J., Shi, G., Bei, J., Wang, S., Cao, Y., Shang, Q., Yang, G., & Wang, W. (2002) · Journal of Biomedical Materials Research · doi:10.1002/jbm.10318 · Cited by 387
The effect of matrix stiffness on mesenchymal stem cell differentiation in a 3D thixotropic gel
Pek, Y. S., Wan, A. C. A., & Ying, J. Y. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2009.09.057 · Cited by 384
Rationally designed meta-implants: a combination of auxetic and conventional meta-biomaterials
Kolken, H. M. A., Janbaz, S., Leeflang, S. M. A., Lietaert, K., Weinans, H. H., & Zadpoor, A. A. (2018) · Materials Horizons · doi:10.1039/c7mh00699c · Cited by 374
Engineering growth factors for regenerative medicine applications
Mitchell, A. C., Briquez, P. S., Hubbell, J. A., & Cochran, J. R. (2016) · Acta Biomaterialia · doi:10.1016/j.actbio.2015.11.007 · Cited by 372
A review: Fabrication of porous polyurethane scaffolds
Janik, H., & Marzec, M. (2015) · Materials Science and Engineering: C · doi:10.1016/j.msec.2014.12.037 · Cited by 371
Characteristics of Metals Used in Implants
GOTMAN, I. (1997) · Journal of Endourology · doi:10.1089/end.1997.11.383 · Cited by 354
Viscoelastic hydrogels for 3D cell culture
Chaudhuri, O. (2017) · Biomaterials Science · doi:10.1039/c7bm00261k · Cited by 353
Jones, A. C., Arns, C. H., Hutmacher, D. W., Milthorpe, B. K., Sheppard, A. P., & Knackstedt, M. A. (2009) · Biomaterials · doi:10.1016/j.biomaterials.2008.10.056 · Cited by 346
Geometry as a Factor for Tissue Growth: Towards Shape Optimization of Tissue Engineering Scaffolds
Bidan, C. M., Kommareddy, K. P., Rumpler, M., Kollmannsberger, P., Fratzl, P., & Dunlop, J. W. C. (2013) · Advanced Healthcare Materials · doi:10.1002/adhm.201200159 · Cited by 341
Advances in metals and alloys for joint replacement
Kunčická, L., Kocich, R., & Lowe, T. C. (2017) · Progress in Materials Science · doi:10.1016/j.pmatsci.2017.04.002 · Cited by 329
Falanga, V., & Sabolinski, M. (1999) · Wound Repair and Regeneration · doi:10.1046/j.1524-475x.1999.00201.x · Cited by 326
Advanced smart biomaterials and constructs for hard tissue engineering and regeneration
Zhang, K., Wang, S., Zhou, C., Cheng, L., Gao, X., Xie, X., Sun, J., Wang, H., Weir, M. D., Reynolds, M. A., et al. (2018) · Bone Research · doi:10.1038/s41413-018-0032-9 · Cited by 317
3D in vitro bioengineered tumors based on collagen I hydrogels
Szot, C. S., Buchanan, C. F., Freeman, J. W., & Rylander, M. N. (2011) · Biomaterials · doi:10.1016/j.biomaterials.2011.07.001 · Cited by 306
Curvotaxis directs cell migration through cell-scale curvature landscapes
Pieuchot, L., Marteau, J., Guignandon, A., Dos Santos, T., Brigaud, I., Chauvy, P.-F., Cloatre, T., Ponche, A., Petithory, T., Rougerie, P., et al. (2018) · Nature Communications · doi:10.1038/s41467-018-06494-6 · Cited by 304
Jamming of frictional spheres and random loose packing
Silbert, L. E. (2010) · Soft Matter · doi:10.1039/c001973a · Cited by 297
Drenckhan, W., & Saint-Jalmes, A. (2015) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2015.04.001 · Cited by 296
Growth of continuous bonelike mineral within porous poly(lactide-co-glycolide) scaffoldsin vitro
Murphy, W. L., Kohn, D. H., & Mooney, D. J. (2000) · Journal of Biomedical Materials Research · doi:10.1002/(sici)1097-4636(200004)50:1<50::aid-jbm8>3.0.co;2-f · Cited by 296
Yu, D., Shen, X., Branford-White, C. J., White, K., Zhu, L., & Bligh, S. W. A. (2009) · Nanotechnology · doi:10.1088/0957-4484/20/5/055104 · Cited by 288
Montazerian, H., Davoodi, E., Asadi-Eydivand, M., Kadkhodapour, J., & Solati-Hashjin, M. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.04.009 · Cited by 286
Powell, H. M., & Boyce, S. T. (2009) · Tissue Engineering Part A · doi:10.1089/ten.tea.2008.0473 · Cited by 267
Photo-patterning of porous hydrogels for tissue engineering
Bryant, S. J., Cuy, J. L., Hauch, K. D., & Ratner, B. D. (2007) · Biomaterials · doi:10.1016/j.biomaterials.2006.11.033 · Cited by 263
Mechanical Properties and Cellular Proliferation of Electrospun Collagen Type II
Shields, K. J., Beckman, M. J., Bowlin, G. L., & Wayne, J. S. (2004) · Tissue Engineering · doi:10.1089/1076327042500373 · Cited by 262
Recent advancements in electrospinning design for tissue engineering applications: A review
Kishan, A. P., & Cosgriff‐Hernandez, E. M. (2017) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.36124 · Cited by 261
Matsiko, A., Gleeson, J. P., & O'Brien, F. J. (2015) · Tissue Engineering Part A · doi:10.1089/ten.tea.2013.0545 · Cited by 259
Handheld skin printer: in situ formation of planar biomaterials and tissues
Hakimi, N., Cheng, R., Leng, L., Sotoudehfar, M., Ba, P. Q., Bakhtyar, N., Amini-Nik, S., Jeschke, M. G., & Günther, A. (2018) · Lab on a Chip · doi:10.1039/c7lc01236e · Cited by 259
Alvarez, M. M., Liu, J. C., Trujillo-de Santiago, G., Cha, B.-H., Vishwakarma, A., Ghaemmaghami, A. M., & Khademhosseini, A. (2016) · Journal of Controlled Release · doi:10.1016/j.jconrel.2016.01.026 · Cited by 256
Platelet-Rich Fibrin is a Bioscaffold and Reservoir of Growth Factors for Tissue Regeneration
Kang, Y.-H., Jeon, S. H., Park, J.-Y., Chung, J.-H., Choung, Y.-H., Choung, H.-W., Kim, E.-S., & Choung, P.-H. (2011) · Tissue Engineering Part A · doi:10.1089/ten.tea.2010.0327 · Cited by 254
Feng, B., Jinkang, Z., Zhen, W., Jianxi, L., Jiang, C., Jian, L., Guolin, M., & Xin, D. (2011) · Biomedical Materials · doi:10.1088/1748-6041/6/1/015007 · Cited by 252
Self‐Healing Supramolecular Hydrogels for Tissue Engineering Applications
Saunders, L., & Ma, P. X. (2019) · Macromolecular Bioscience · doi:10.1002/mabi.201800313 · Cited by 252
Li, G., Wang, L., Pan, W., Yang, F., Jiang, W., Wu, X., Kong, X., Dai, K., & Hao, Y. (2016) · Scientific Reports · doi:10.1038/srep34072 · Cited by 251
Hasan, A., Waibhaw, G., Saxena, V., & Pandey, L. M. (2018) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2018.01.089 · Cited by 251
A Perspective on the Clinical Translation of Scaffolds for Tissue Engineering
Webber, M. J., Khan, O. F., Sydlik, S. A., Tang, B. C., & Langer, R. (2015) · Annals of Biomedical Engineering · doi:10.1007/s10439-014-1104-7 · Cited by 243
Brunton, P. A., Davies, R. P. W., Burke, J. L., Smith, A., Aggeli, A., Brookes, S. J., & Kirkham, J. (2013) · British Dental Journal · doi:10.1038/sj.bdj.2013.741 · Cited by 242
Sintered carbonate apatites as bioresorbable bone substitutes
Doi, Y., Shibutani, T., Moriwaki, Y., Kajimoto, T., & Iwayama, Y. (1998) · Journal of Biomedical Materials Research · Cited by 239
3D niche microarrays for systems-level analyses of cell fate
Ranga, A., Gobaa, S., Okawa, Y., Mosiewicz, K., Negro, A., & Lutolf, M. P. (2014) · Nature Communications · doi:10.1038/ncomms5324 · Cited by 238
A Metabolically Active Human Dermal Replacement for the Treatment of Diabetic Foot Ulcers
Naughton, G., Mansbridge, J., & Gentzkow, G. (1997) · Artificial Organs · doi:10.1111/j.1525-1594.1997.tb00476.x · Cited by 233
High throughput methods applied in biomaterial development and discovery
Hook, A. L., Anderson, D. G., Langer, R., Williams, P., Davies, M. C., & Alexander, M. R. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2009.09.037 · Cited by 231
Tunable dual growth factor delivery from polyelectrolyte multilayer films
Shah, N. J., Macdonald, M. L., Beben, Y. M., Padera, R. F., Samuel, R. E., & Hammond, P. T. (2011) · Biomaterials · doi:10.1016/j.biomaterials.2011.04.036 · Cited by 226
Torres-Sanchez, C., Al Mushref, F. R. A., Norrito, M., Yendall, K., Liu, Y., & Conway, P. P. (2017) · Materials Science and Engineering: C · doi:10.1016/j.msec.2017.03.249 · Cited by 217
Effect of porosity on the fluid flow characteristics and mechanical properties of tantalum scaffolds
Shimko, D. A., Shimko, V. F., Sander, E. A., Dickson, K. F., & Nauman, E. A. (2005) · Journal of Biomedical Materials Research Part B: Applied Biomaterials · doi:10.1002/jbm.b.30229 · Cited by 215
Tunable Supramolecular Hydrogels for Selection of Lineage-Guiding Metabolites in Stem Cell Cultures
Alakpa, E. V., Jayawarna, V., Lampel, A., Burgess, K. V., West, C. C., Bakker, S. C. J., Roy, S., Javid, N., Fleming, S., Lamprou, D. A., et al. (2016) · Chem · doi:10.1016/j.chempr.2016.07.001 · Cited by 215
Di Luca, A., Ostrowska, B., Lorenzo-Moldero, I., Lepedda, A., Swieszkowski, W., Van Blitterswijk, C., & Moroni, L. (2016) · Scientific Reports · doi:10.1038/srep22898 · Cited by 207
Xiao, X., Wang, W., Liu, D., Zhang, H., Gao, P., Geng, L., Yuan, Y., Lu, J., & Wang, Z. (2015) · Scientific Reports · doi:10.1038/srep09409 · Cited by 185
Naskar, J., Palui, G., & Banerjee, A. (2009) · The Journal of Physical Chemistry B · doi:10.1021/jp904251j · Cited by 184
Hydrolytic and enzymatic degradation of a poly(ε-caprolactone) network
Castilla-Cortázar, I., Más-Estellés, J., Meseguer-Dueñas, J. M., Escobar Ivirico, J. L., Marí, B., & Vidaurre, A. (2012) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2012.05.038 · Cited by 181
Adipurnama, I., Yang, M.-C., Ciach, T., & Butruk-Raszeja, B. (2017) · Biomaterials Science · doi:10.1039/c6bm00618c · Cited by 179
New trends in bioactive scaffolds: The importance of nanostructure
Jones, J. R. (2009) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2008.08.003 · Cited by 179
Fibroblast contraction of a collagen–GAG matrix
Freyman, T. M., Yannas, I. V., Yokoo, R., & Gibson, L. J. (2001) · Biomaterials · doi:10.1016/s0142-9612(01)00034-5 · Cited by 177
A fibrinogen-based precision microporous scaffold for tissue engineering
Linnes, M. P., Ratner, B. D., & Giachelli, C. M. (2007) · Biomaterials · doi:10.1016/j.biomaterials.2007.08.020 · Cited by 174
Current progress in 3D printing for cardiovascular tissue engineering
Mosadegh, B., Xiong, G., Dunham, S., & Min, J. K. (2015) · Biomedical Materials · doi:10.1088/1748-6041/10/3/034002 · Cited by 174
Azevedo, S., Costa, A. M. S., Andersen, A., Choi, I. S., Birkedal, H., & Mano, J. F. (2017) · Advanced Materials · doi:10.1002/adma.201700759 · Cited by 171
Choi, S.-W., Zhang, Y. S., & Younan Xia, A. (2010) · Langmuir · doi:10.1021/la104206h · Cited by 162
Fibrin–Polyurethane Composites for Articular Cartilage Tissue Engineering: A Preliminary Analysis
Lee, C. R., Grad, S., Gorna, K., Gogolewski, S., Goessl, A., & Alini, M. (2005) · Tissue Engineering · doi:10.1089/ten.2005.11.1562 · Cited by 161
Fadia, N. B., Bliley, J. M., DiBernardo, G., Crammond, D. J., Schilling, B. K., Sivak, W. N., Spiess, A. M., Washington, K. M., Waldner, M., Liao, H.-T., et al. (2020) · Science Translational Medicine · doi:10.1126/scitranslmed.aav7753 · Cited by 160
Kon, E., Roffi, A., Filardo, G., Tesei, G., & Marcacci, M. (2015) · Arthroscopy: The Journal of Arthroscopic & Related Surgery · doi:10.1016/j.arthro.2014.11.017 · Cited by 159
Effect of Scaffold Stiffness on Myoblast Differentiation
Levy-Mishali, M., Zoldan, J., & Levenberg, S. (2008) · Tissue Engineering Part A · doi:10.1089/ten.tea.2008.0111 · Cited by 155
Replacement of the Knee Meniscus by a Porous Polymer Implant: A Study in Dogs
van Tienen, T. G., Heijkants, R. G. J. C., de Groot, J. H., Pennings, A. J., Schouten, A. J., Veth, R. P. H., & Buma, P. (2005) · The American Journal of Sports Medicine · doi:10.1177/0363546505280905 · Cited by 151
Bioactive scaffolds based on elastin-like materials for wound healing
Rodríguez‐Cabello, J. C., de Torre, I. G., Ibáñez‐Fonseca, A., & Alonso, M. (2018) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2018.03.003 · Cited by 148
Choi, S., Zhang, Y. S., MacEwan, M. R., & Younan Xia, A. (2012) · Advanced Healthcare Materials · doi:10.1002/adhm.201200106 · Cited by 147
Baker, B. M., Shah, R. P., Huang, A. H., & Mauck, R. L. (2011) · Tissue Engineering Part A · doi:10.1089/ten.tea.2010.0535 · Cited by 147
Sulfated polysaccharide-based scaffolds for orthopaedic tissue engineering
Dinoro, J., Maher, M., Talebian, S., Jafarkhani, M., Mehrali, M., Orive, G., Foroughi, J., Lord, M. S., & Dolatshahi‐Pirouz, A. (2019) · Biomaterials · doi:10.1016/j.biomaterials.2019.05.025 · Cited by 143
Oh, S. H., Kim, T. H., Im, G., & Lee, J. H. (2010) · Biomacromolecules · doi:10.1021/bm100199m · Cited by 142
Bi-directional cell-pericellular matrix interactions direct stem cell fate
Ferreira, S. A., Motwani, M. S., Faull, P. A., Seymour, A. J., Yu, T. T. L., Enayati, M., Taheem, D. K., Salzlechner, C., Haghighi, T., Kania, E. M., et al. (2018) · Nature Communications · doi:10.1038/s41467-018-06183-4 · Cited by 137
Liu, A., Xue, G.-H., Sun, M., Shao, H., Ma, C., Gao, Q., Gou, Z., Yan, S., Liu, Y., & He, Y. (2016) · Scientific Reports · doi:10.1038/srep21704 · Cited by 135
Kemppainen, J. M., & Hollister, S. J. (2009) · Biomaterials · doi:10.1016/j.biomaterials.2009.09.041 · Cited by 126
Importance and regulation of adult stem cell migration
de Lucas, B., Pérez, L. M., & Gálvez, B. G. (2017) · Journal of Cellular and Molecular Medicine · doi:10.1111/jcmm.13422 · Cited by 120
Danilevicius, P., Georgiadi, L., Pateman, C. J., Claeyssens, F., Chatzinikolaidou, M., & Farsari, M. (2015) · Applied Surface Science · doi:10.1016/j.apsusc.2014.06.012 · Cited by 117
Polyamides and their functionalization: recent concepts for their applications as biomaterials
Winnacker, M. (2017) · Biomaterials Science · doi:10.1039/c7bm00160f · Cited by 117
Xiao, Z., Tang, F., Tang, J., Yang, H., Zhao, Y., Chen, B., Han, S., Wang, N., Li, X., Cheng, S., et al. (2016) · Science China Life Sciences · doi:10.1007/s11427-016-5080-z · Cited by 116
Moradi, L., Vasei, M., Dehghan, M. M., Majidi, M., Farzad‐Mohajeri, S., & Bonakdar, S. (2017) · Biomaterials · doi:10.1016/j.biomaterials.2017.02.022 · Cited by 116
Lozoya, O. A., Wauthier, E., Turner, R., Barbier, C., Prestwich, G. D., Guilak, F., Superfine, R., Lubkin, S. R., & Reid, L. M. (2011) · Biomaterials · doi:10.1016/j.biomaterials.2011.06.042 · Cited by 114
Fabrication of computationally designed scaffolds by low temperature 3D printing
Castilho, M. D., Dias, M., Gbureck, U., Gröll, J., Fernandes, P. R., Pires, I., Gouveia, B., Rodrigues, J. M. C., & Vorndran, E. (2013) · Biofabrication · doi:10.1088/1758-5082/5/3/035012 · Cited by 113
3D Bioprinting of Cartilage for Orthopedic Surgeons: Reading between the Lines
Bella, C. D., Fosang, A., Donati, D. M., Wallace, G. G., & Choong, P. (2015) · Frontiers in Surgery · doi:10.3389/fsurg.2015.00039 · Cited by 107
Progress in three-dimensional printing with growth factors
Koons, G. L., & Mikos, A. G. (2018) · Journal of Controlled Release · doi:10.1016/j.jconrel.2018.12.035 · Cited by 107
Sun, X., Kang, Y., Bao, J., Zhang, Y., Yang, Y., & Zhou, X. (2013) · Biomaterials · doi:10.1016/j.biomaterials.2013.03.015 · Cited by 103
Stachewicz, U., Szewczyk, P. K., Kruk, A., Barber, A. H., & Czyrska‐Filemonowicz, A. (2017) · Materials Science and Engineering C · doi:10.1016/j.msec.2017.08.076 · Cited by 103
Somo, S. I., Akar, B., Bayrak, E. S., Larson, J. C., Appel, A. A., Mehdizadeh, H., Çınar, A., & Brey, E. M. (2015) · Tissue Engineering Part C Methods · doi:10.1089/ten.tec.2014.0454 · Cited by 102
Zhang, Q., Jiang, Y., Zhang, Y., Ye, Z., Tan, W., & Lang, M. (2013) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2012.10.008 · Cited by 102
Guyot, Y., Papantoniou, I., Chai, Y. C., Bael, S. V., Schrooten, J., & Geris, L. (2014) · Biomechanics and Modeling in Mechanobiology · doi:10.1007/s10237-014-0577-5 · Cited by 102
A pore way to heal and regenerate: 21st century thinking on biocompatibility
Ratner, B. D. (2016) · Regenerative Biomaterials · doi:10.1093/rb/rbw006 · Cited by 101
Ng, W. S., Lee, C. S., Chuah, C. H., & Cheng, S. F. (2016) · Industrial Crops and Products · doi:10.1016/j.indcrop.2016.11.066 · Cited by 99
The Role of Biomaterials in Stem Cell Differentiation: Applications in the Musculoskeletal System
Elisseeff, J. H., Ferran, A., Hwang, S., Varghese, S., & Zhang, Z. (2006) · Stem Cells and Development · doi:10.1089/scd.2006.15.295 · Cited by 98
Growth‐Factor Free Multicomponent Nanocomposite Hydrogels That Stimulate Bone Formation
Okesola, B. O., Ni, S., Derkuş, B., Galeano, C. C., Hasan, A., Wu, Y., Ramis, J. M., Buttery, L. D. K., Dawson, J. I., D’Este, M., et al. (2020) · Advanced Functional Materials · doi:10.1002/adfm.201906205 · Cited by 98
Bio-Functional Design, Application and Trends in Metallic Biomaterials
Yang, K., Zhou, C., Fan, H., Fan, Y., Jiang, Q. Y., Song, P., Fan, H., Chen, Y., & Zhang, X. (2017) · International Journal of Molecular Sciences · doi:10.3390/ijms19010024 · Cited by 96
Liquid foam templating - A route to tailor-made polymer foams.
Andrieux, S., Quell, A., Stubenrauch, C., & Drenckhan, W. (2018) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2018.03.010 · Cited by 94
Werner, M., Kurniawan, N. A., Korus, G., Bouten, C. V. C., & Petersen, A. (2018) · Journal of The Royal Society Interface · doi:10.1098/rsif.2018.0162 · Cited by 94
Synthetic scaffold morphology controls human dermal connective tissue formation
Wang, H., Pieper, J., Péters, F. L. A. M. A., van Blitterswijk, C., & Lamme, E. N. (2005) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.30232 · Cited by 92
The Impact of Substrate Stiffness and Mechanical Loading on Fibroblast-Induced Scaffold Remodeling
Petersen, A., Joly, P., Bergmann, C., Korus, G., & Duda, G. N. (2012) · Tissue Engineering Part A · doi:10.1089/ten.tea.2011.0514 · Cited by 79
Yeo, M., Lee, H., & Kim, G. (2016) · Biofabrication · doi:10.1088/1758-5090/8/3/035021 · Cited by 78
3D Printing and Biofabrication
(2018) · Springer eBooks · doi:10.1007/978-3-319-45444-3 · Cited by 78
Kang, W., Bi, B., Zhuo, R., & Jiang, X. (2016) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2016.12.032 · Cited by 76
Sun, A. X., Lin, H., Beck, A. M., Kilroy, E. J., & Tuan, R. S. (2015) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2015.00115 · Cited by 75
Harley, B. A. C., Freyman, T. M., Wong, M. Q., & Gibson, L. J. (2007) · Biophysical Journal · doi:10.1529/biophysj.106.095471 · Cited by 75
Sridharan, R., Ryan, E. J., Kearney, C. J., Kelly, D. J., & O’Brien, F. J. (2018) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.8b00910 · Cited by 74
Protease-Degradable Microgels for Protein Delivery for Vascularization
Foster, G. A., Headen, D., Gonzalez-Garcia, C., Salmerón-Sánchez, M., Shirwan, H., & García, A. J. (2016) · Biomaterials · doi:10.1016/j.biomaterials.2016.10.044 · Cited by 73
Liu, J., Xiao, Y. M., Wang, X., Huang, L., Chen, Y., & Bao, C. (2018) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2018.09.202 · Cited by 73
Nonswellable and Tough Supramolecular Hydrogel Based on Strong Micelle Cross-Linkings
Qin, Z., Yu, X., Wu, H., Li, J., Lv, H., & Yang, X. (2019) · Biomacromolecules · doi:10.1021/acs.biomac.9b00666 · Cited by 73
Electrospun Biodegradable Nanofibrous Mats for Tissue Engineering
Halili, A. N., Nikkola, L., Ylikauppila, H., Ashammakhi, N. A., & Hasırcı, V. (2008) · Nanomedicine · doi:10.2217/17435889.3.1.45 · Cited by 72
Fibrous Protein Self‐Assembly in Biomimetic Materials
Mason, T. O., & Shimanovich, U. (2018) · Advanced Materials · doi:10.1002/adma.201706462 · Cited by 72
Gas foaming technologies for 3D scaffold engineering
Costantini, M., & Barbetta, A. (2017) · Elsevier eBooks · doi:10.1016/b978-0-08-100979-6.00006-9 · Cited by 71
A biomimetic self-assembling peptide promotes bone regeneration in vivo: A rat cranial defect study
Saha, S., Yang, X., Wijayathunga, N., Harris, S. A., Feichtinger, G. A., Davies, R. P., & Kirkham, J. (2019) · Bone · doi:10.1016/j.bone.2019.06.020 · Cited by 70
Costantini, M., Colosi, C., Jaroszewicz, J., Tosato, A., Święszkowski, W., Dentini, M., Garstecki, P., & Barbetta, A. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b08221 · Cited by 68
Ikeda, R., Fujioka, H., Nagura, I., Kokubu, T., Toyokawa, N., Inui, A., Makino, T., Kaneko, H., Doita, M., & Kurosaka, M. (2008) · International Orthopaedics · doi:10.1007/s00264-008-0532-0 · Cited by 67
Quantitative characterization of sphere‐templated porous biomaterials
Marshall, A. J., & Ratner, B. D. (2005) · AIChE Journal · doi:10.1002/aic.10390 · Cited by 63
Grier, W. K., Iyoha, E. M., & Harley, B. A. C. (2016) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2016.08.034 · Cited by 63
Precision‐porous templated scaffolds of varying pore size drive dendritic cell activation
Chen, R., Ma, H., Zhang, L., & Bryers, J. D. (2017) · Biotechnology and Bioengineering · doi:10.1002/bit.26532 · Cited by 47
Highly Ordered Gelatin Methacryloyl Hydrogel Foams with Tunable Pore Size
Dehli, F., Rebers, L., Stubenrauch, C., & Southan, A. (2019) · Biomacromolecules · doi:10.1021/acs.biomac.9b00433 · Cited by 47
Substrate curvature regulates cell migration
He, X., & Jiang, Y. (2017) · Physical Biology · doi:10.1088/1478-3975/aa6f8e · Cited by 44
The Role of Electrospun Fiber Scaffolds in Stem Cell Therapy for Skin Tissue Regeneration
Gizaw, M., Faglie, A., Pieper, M., Poudel, S., & Chou, S. (2019) · Med One · doi:10.20900/mo.20190002 · Cited by 42
A thermosensitive drug delivery system prepared by blend electrospinning
Li, H., Liu, K., Sang, Q., Williams, G. R., Wu, J., Wang, H., Wu, J., & Zhu, L. (2017) · Colloids and Surfaces B Biointerfaces · doi:10.1016/j.colsurfb.2017.07.058 · Cited by 40
Lutzweiler, G., Barthès, J., Koenig, G., Kerdjoudj, H., Mayingi, J., Boulmedais, F., Schaaf, P., Drenckhan, W., & Vrana, N. E. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b04625 · Cited by 40
Self-citationWang, Y.-F., Barrera, C. M., Dauer, E. A., Gu, W., Andreopoulos, F. M., & Huang, C. ‐. C. (2016) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2016.09.029 · Cited by 37
Enzyme-assisted self-assembly within a hydrogel induced by peptide diffusion
Criado‐Gonzalez, M., Fores, J. R., Wagner, D., Schröder, A., Carvalho, A., Schmutz, M., Harth, E. M., Schaaf, P., Jierry, L., & Boulmedais, F. (2018) · Chemical Communications · doi:10.1039/c8cc09437c · Cited by 36
Roether, J., Bertels, S., Oelschlaeger, C., Bastmeyer, M., & Willenbacher, N. (2018) · PLoS ONE · doi:10.1371/journal.pone.0207397 · Cited by 34
Spatiotemporal control of gene expression using microfluidics
Benedetto, A., Accetta, G., Fujita, Y., & Charras, G. (2014) · Lab on a Chip · doi:10.1039/c3lc51281a · Cited by 32
Barthès, J., Cazzola, M., Muller, C. B., Dollinger, C., Debry, C., Ferraris, S., Spriano, S., & Vrana, N. E. (2020) · Materials Science and Engineering C · doi:10.1016/j.msec.2020.110845 · Cited by 32
Nanopatterned Scaffolds for Neural Tissue Engineering and Regenerative Medicine
Park, S., Kim, D., Park, S., Kim, S., Lee, D., Kim, W., & Kim, J. (2018) · Advances in experimental medicine and biology · doi:10.1007/978-981-13-0950-2_22 · Cited by 30
Bioengineered peptide-functionalized hydrogels for tissue regeneration and repair
Neves, S. C., Pereira, R. F., Araújo, M., & Barrias, C. C. (2017) · Elsevier eBooks · doi:10.1016/b978-0-08-100803-4.00004-8 · Cited by 28
Lu, T., Feng, S., He, F., et al. (2019) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.36844 · Cited by 25
Schaschkow, A., Sigrist, S., Mura, C., Barthès, J., Vrana, N. E., Czuba, E., Lemaire, F., Neidl, R., Dissaux, C., Lejay, A., et al. (2019) · Acta Biomaterialia · doi:10.1016/j.actbio.2019.11.047 · Cited by 25
Fabrication and characterization of 3 D ‐printed elastic auricular scaffolds: A pilot study
Kim, H. Y., Jung, S. Y., Lee, S. J., Lee, H. J., Truong, M., & Kim, H. S. (2018) · The Laryngoscope · doi:10.1002/lary.27344 · Cited by 23
Biogelx: Cell Culture on Self-Assembling Peptide Gels
Harper, M. M., Connolly, M. L., Goldie, L., Irvine, E., Shaw, J. E., Jayawarna, V., Richardson, S. M., Dalby, M. J., Lightbody, D., & Ulijn, R. V. (2018) · Methods in molecular biology · doi:10.1007/978-1-4939-7811-3_18 · Cited by 21
“Smart” hydrogels in tissue engineering and regenerative medicine applications
Bacelar, A. H., Cengiz, I. F., Silva‐Correia, J., et al. (2017) · Portuguese National Funding Agency for Science, Research and Technology (RCAAP Project by FCT) · Cited by 18
Vrana, N. E., Ghaemmaghami, A. M., & Zorlutuna, P. (2019) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2019.00015 · Cited by 13
Zwitterionic Functionalizable Scaffolds with Gyroid Pore Architecture for Tissue Engineering
Kostina, N. Y., Blanquer, S., Pop‐Georgievski, O., Rahimi, K., Dittrich, B., Höcherl, A., Michálek, J., Grijpma, D. W., & Rodriguez‐Emmenegger, C. (2019) · Macromolecular Bioscience · doi:10.1002/mabi.201800403 · Cited by 8
Kuo, T.-Y., Lin, C.-M., Hung, S., Hsien, T.-Y., Wang, D., & Hsieh, H. (2018) · Journal of the Taiwan Institute of Chemical Engineers · doi:10.1016/j.jtice.2018.06.011 · Cited by 7
Lutzweiler, G., Farago, J., Oliveira, E., Jacomine, L., Erverdi, O., Vrana, N. E., Testouri, A., Schaaf, P., & Drenckhan, W. (2020) · Soft Matter · doi:10.1039/c9sm01991j · Cited by 5
Self-citationRoss, E. A., Turner, L.-A., Saeed, A., Burgess, K., Blackburn, G. J., Reynolds, P. M., Wells, J. A., Mountford, J. C., Gadegaard, N., Salmerón‐Sánchez, M., et al. (2019) · bioRxiv (Cold Spring Harbor Laboratory) · doi:10.1101/603332 · Cited by 4
Cited by
Optimizing scaffold pore size for tissue engineering: insights across various tissue types
Mukasheva, F., Adilova, L., Dyussenbinov, A., Yernaimanova, B., Abilev, M., & Akilbekova, D. (2024) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2024.1444986 · Cited by 468
Xiong, Y., Mi, B.-B., Lin, Z., Hu, Y.-Q., Yu, L., Zha, K.-K., Panayi, A. C., Yu, T., Chen, L., Liu, Z.-P., et al. (2022) · Military Medical Research · doi:10.1186/s40779-022-00426-8 · Cited by 291
Jamaluddin, M. F. B., Ghosh, A., Ingle, A., Mohammed, R., Ali, A., Bahrami, M., Kaiko, G., Gibb, Z., Filipe, E. C., Cox, T. R., et al. (2022) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.2208040119 · Cited by 84
Vakilian, S., Al‐Hashmi, S., Al‐kindi, J., Al‐Fahdi, F., Al‐Wahaibi, N., Shalaby, A., Al‐Riyami, H., Al‐Harrasi, A., & Jamshidi‐adegani, F. (2024) · Macromolecular Bioscience · doi:10.1002/mabi.202300530 · Cited by 5
Metadata
- Authors
- Lutzweiler, G., Ndreu Halili, A., & Engin Vrana, N.
- Venue
- Pharmaceutics
- Publisher
- MDPI AG
- Published
- 2020-06-29
- Volume
- 12
- Issue
- 7
- Pages
- 602
- ISSN
- 1999-4923 (ISSN-L)
- OpenAlex
- W3037029104
- Cited by
- 271
- References
- 192
- FWCI
- 5.46
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.