The DOI matches its Crossref record; 206 of the 206 references it cites were found in a registry or an index.
3D Bioprinting for Organ Regeneration
Open accessAbstract
Regenerative medicine holds the promise of engineering functional tissues or organs to heal or replace abnormal and necrotic tissues/organs, offering hope for filling the gap between organ shortage and transplantation needs. Three‐dimensional (3D) bioprinting is evolving into an unparalleled biomanufacturing technology due to its high‐integration potential for patient‐specific designs, precise and rapid manufacturing capabilities with high resolution, and unprecedented versatility. It enables precise control over multiple compositions, spatial distributions, and architectural accuracy/complexity, therefore achieving effective recapitulation of microstructure, architecture, mechanical properties, and biological functions of target tissues and organs. Here we provide an overview of recent advances in 3D bioprinting technology, as well as design concepts of bioinks suitable for the bioprinting process. We focus on the applications of this technology for engineering living organs, focusing more specifically on vasculature, neural networks, the heart and liver. We conclude with current challenges and the technical perspective for further development of 3D organ bioprinting.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
1 retracted
RETRACTED: Engineered whole organs and complex tissues
Badylak, S. F., Weiss, D. J., Caplan, A., & Macchiarini, P. (2012) · The Lancet · doi:10.1016/s0140-6736(12)60073-7 · Cited by 417
RetractedAlginate: Properties and biomedical applications
Lee, K. Y., & Mooney, D. J. (2012) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2011.06.003 · Cited by 8,095
3D bioprinting of tissues and organs
Murphy, S. V., & Atala, A. (2014) · Nature Biotechnology · doi:10.1038/nbt.2958 · Cited by 7,034
Basic and Therapeutic Aspects of Angiogenesis
Potente, M., Gerhardt, H., & Carmeliet, P. (2011) · Cell · doi:10.1016/j.cell.2011.08.039 · Cited by 2,771
Zheng, Y. F., Gu, X. N., & Witte, F. (2014) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2014.01.001 · Cited by 2,436
Review of selective laser melting: Materials and applications
Yap, C. Y., Chua, C. K., Dong, Z. L., Liu, Z. H., Zhang, D. Q., Loh, L. E., & Sing, S. L. (2015) · Applied Physics Reviews · doi:10.1063/1.4935926 · Cited by 2,353
Capturing complex 3D tissue physiology in vitro
Griffith, L. G., & Swartz, M. A. (2006) · Nature Reviews Molecular Cell Biology · doi:10.1038/nrm1858 · Cited by 2,290
Continuous liquid interface production of 3D objects
Tumbleston, J. R., Shirvanyants, D., Ermoshkin, N., Janusziewicz, R., Johnson, A. R., Kelly, D., Chen, K., Pinschmidt, R., Rolland, J. P., Ermoshkin, A., et al. (2015) · Science · doi:10.1126/science.aaa2397 · Cited by 2,278
3D bioprinting of vascularized, heterogeneous cell-laden tissue constructs
Kolesky, D. B., Truby, R. L., Gladman, A. S., Busbee, T. A., Homan, K. A., & Lewis, J. A. (2014) · Advanced Materials · doi:10.1002/adma.201305506 · Cited by 2,102
Rapid casting of patterned vascular networks for perfusable engineered three-dimensional tissues
Miller, J. S., Stevens, K. R., Yang, M. T., Baker, B. M., Nguyen, D.-H. T., Cohen, D. M., Toro, E., Chen, A. A., Galie, P. A., Yu, X., et al. (2012) · Nature Materials · doi:10.1038/nmat3357 · Cited by 1,917
Hinton, T. J., Jallerat, Q., Palchesko, R. N., Park, J. H., Grodzicki, M. S., Shue, H.-J., Ramadan, M. H., Hudson, A. R., & Feinberg, A. W. (2015) · Science Advances · doi:10.1126/sciadv.1500758 · Cited by 1,805
3D bioprinting for engineering complex tissues
Mandrycky, C., Wang, Z., Kim, K., & Kim, D.-H. (2016) · Biotechnology Advances · doi:10.1016/j.biotechadv.2015.12.011 · Cited by 1,754
Recent advances in 3D printing of biomaterials
Chia, H. N., & Wu, B. M. (2015) · Journal of Biological Engineering · doi:10.1186/s13036-015-0001-4 · Cited by 1,734
3D printing with polymers: Challenges among expanding options and opportunities
Stansbury, J. W., & Idacavage, M. J. (2016) · Dental Materials · doi:10.1016/j.dental.2015.09.018 · Cited by 1,732
Complexity in biomaterials for tissue engineering
Place, E. S., Evans, N. D., & Stevens, M. M. (2009) · Nature Materials · doi:10.1038/nmat2441 · Cited by 1,728
3D printing based on imaging data: review of medical applications
Rengier, F., Mehndiratta, A., von Tengg-Kobligk, H., Zechmann, C. M., Unterhinninghofen, R., Kauczor, H.-U., & Giesel, F. L. (2010) · International Journal of Computer Assisted Radiology and Surgery · doi:10.1007/s11548-010-0476-x · Cited by 1,584
Current advances and future perspectives in extrusion-based bioprinting
Ozbolat, I. T., & Hospodiuk, M. (2016) · Biomaterials · doi:10.1016/j.biomaterials.2015.10.076 · Cited by 1,572
Three-dimensional bioprinting of thick vascularized tissues
Kolesky, D. B., Homan, K. A., Skylar-Scott, M. A., & Lewis, J. A. (2016) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1521342113 · Cited by 1,492
Nanotechnological strategies for engineering complex tissues
Dvir, T., Timko, B. P., Kohane, D. S., & Langer, R. (2011) · Nature Nanotechnology · doi:10.1038/nnano.2010.246 · Cited by 1,367
Scaffold-free vascular tissue engineering using bioprinting
Norotte, C., Marga, F. S., Niklason, L. E., & Forgacs, G. (2009) · Biomaterials · doi:10.1016/j.biomaterials.2009.06.034 · Cited by 1,339
Biomedical Applications of Layer‐by‐Layer Assembly: From Biomimetics to Tissue Engineering
Tang, Z., Wang, Y., Podsiadlo, P., & Kotov, N. A. (2006) · Advanced Materials · doi:10.1002/adma.200600113 · Cited by 1,302
A review of trends and limitations in hydrogel-rapid prototyping for tissue engineering
Billiet, T., Vandenhaute, M., Schelfhout, J., Van Vlierberghe, S., & Dubruel, P. (2012) · Biomaterials · doi:10.1016/j.biomaterials.2012.04.050 · Cited by 1,284
Organ printing: Tissue spheroids as building blocks
Mironov, V., Visconti, R. P., Kasyanov, V., Forgacs, G., Drake, C. J., & Markwald, R. R. (2009) · Biomaterials · doi:10.1016/j.biomaterials.2008.12.084 · Cited by 1,238
Additive manufacturing of tissues and organs
Melchels, F. P. W., Domingos, M. A. N., Klein, T. J., Malda, J., Bartolo, P. J., & Hutmacher, D. W. (2012) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2011.11.007 · Cited by 1,213
Advancing biomaterials of human origin for tissue engineering
Chen, F.-M., & Liu, X. (2016) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2015.02.004 · Cited by 1,158
Nanotechnology and nanomaterials: Promises for improved tissue regeneration
Zhang, L., & Webster, T. J. (2009) · Nano Today · doi:10.1016/j.nantod.2008.10.014 · Cited by 1,143
Self-citationPrinting and Prototyping of Tissues and Scaffolds
Derby, B. (2012) · Science · doi:10.1126/science.1226340 · Cited by 1,108
Vascularization is the key challenge in tissue engineering
Novosel, E. C., Kleinhans, C., & Kluger, P. J. (2011) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2011.03.004 · Cited by 1,062
3D-printing technologies for electrochemical applications
Ambrosi, A., & Pumera, M. (2016) · Chemical Society Reviews · doi:10.1039/c5cs00714c · Cited by 1,040
3D Bioprinting of heterogeneous aortic valve conduits with alginate/gelatin hydrogels
Duan, B., Hockaday, L. A., Kang, K. H., & Butcher, J. T. (2013) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.34420 · Cited by 1,002
3D Printing of Scaffolds for Tissue Regeneration Applications
Do, A., Khorsand, B., Geary, S. M., & Salem, A. K. (2015) · Advanced Healthcare Materials · doi:10.1002/adhm.201500168 · Cited by 949
Direct 3D bioprinting of perfusable vascular constructs using a blend bioink
Jia, W., Gungor-Ozkerim, P. S., Zhang, Y. S., Yue, K., Zhu, K., Liu, W., Pi, Q., Byambaa, B., Dokmeci, M. R., Shin, S. R., et al. (2016) · Biomaterials · doi:10.1016/j.biomaterials.2016.07.038 · Cited by 922
Deterministically patterned biomimetic human iPSC-derived hepatic model via rapid 3D bioprinting
Ma, X., Qu, X., Zhu, W., Li, Y.-S., Yuan, S., Zhang, H., Liu, J., Wang, P., Lai, C. S. E., Zanella, F., et al. (2016) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1524510113 · Cited by 872
Microfluidic Bioprinting of Heterogeneous 3D Tissue Constructs Using Low‐Viscosity Bioink
Colosi, C., Shin, S. R., Manoharan, V., Massa, S., Costantini, M., Barbetta, A., Dokmeci, M. R., Dentini, M., & Khademhosseini, A. (2016) · Advanced Materials · doi:10.1002/adma.201503310 · Cited by 863
Application of Collagen Scaffold in Tissue Engineering: Recent Advances and New Perspectives
Dong, C., & Lv, Y. (2016) · Polymers · doi:10.3390/polym8020042 · Cited by 851
Gelatin-Methacryloyl Hydrogels: Towards Biofabrication-Based Tissue Repair
Klotz, B. J., Gawlitta, D., Rosenberg, A. J. W. P., Malda, J., & Melchels, F. P. W. (2016) · Trends in Biotechnology · doi:10.1016/j.tibtech.2016.01.002 · Cited by 846
3D printing of functional biomaterials for tissue engineering
Zhu, W., Ma, X., Gou, M., Mei, D., Zhang, K., & Chen, S. (2016) · Current Opinion in Biotechnology · doi:10.1016/j.copbio.2016.03.014 · Cited by 822
Omnidirectional Printing of 3D Microvascular Networks
Wu, W., DeConinck, A., & Lewis, J. A. (2011) · Advanced Materials · doi:10.1002/adma.201004625 · Cited by 819
Inkjet printing as a deposition and patterning tool for polymers and inorganic particles
Tekin, E., Smith, P. J., & Schubert, U. S. (2008) · Soft Matter · doi:10.1039/b711984d · Cited by 807
Designing Biomaterials for 3D Printing
Guvendiren, M., Molde, J., Soares, R. M. D., & Kohn, J. (2016) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.6b00121 · Cited by 732
Strategies and Molecular Design Criteria for 3D Printable Hydrogels
Jungst, T., Smolan, W., Schacht, K., Scheibel, T., & Groll, J. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.5b00303 · Cited by 712
4D Bioprinting for Biomedical Applications
Gao, B., Yang, Q., Zhao, X., Jin, G., Ma, Y., & Xu, F. (2016) · Trends in Biotechnology · doi:10.1016/j.tibtech.2016.03.004 · Cited by 711
Jakus, A. E., Secor, E. B., Rutz, A. L., Jordan, S. W., Hersam, M. C., & Shah, R. N. (2015) · ACS Nano · doi:10.1021/acsnano.5b01179 · Cited by 710
Hockaday, L. A., Kang, K. H., Colangelo, N. W., Cheung, P. Y. C., Duan, B., Malone, E., Wu, J., Girardi, L. N., Bonassar, L. J., Lipson, H., et al. (2012) · Biofabrication · doi:10.1088/1758-5082/4/3/035005 · Cited by 683
3D Bioprinting for Tissue and Organ Fabrication
Zhang, Y. S., Yue, K., Aleman, J., Mollazadeh-Moghaddam, K., Bakht, S. M., Yang, J., Jia, W., Dell’Erba, V., Assawes, P., Shin, S. R., et al. (2017) · Annals of Biomedical Engineering · doi:10.1007/s10439-016-1612-8 · Cited by 682
Bioprinting Toward Organ Fabrication: Challenges and Future Trends
Ozbolat, I. T., & Yu, Y. (2013) · IEEE Transactions on Biomedical Engineering · doi:10.1109/tbme.2013.2243912 · Cited by 666
3D printing in pharmaceutics: A new tool for designing customized drug delivery systems
Goole, J., & Amighi, K. (2016) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2015.12.071 · Cited by 660
Writing in the granular gel medium
Bhattacharjee, T., Zehnder, S. M., Rowe, K. G., Jain, S., Nixon, R. M., Sawyer, W. G., & Angelini, T. E. (2015) · Science Advances · doi:10.1126/sciadv.1500655 · Cited by 635
Neural tissue engineering options for peripheral nerve regeneration
Gu, X., Ding, F., & Williams, D. F. (2014) · Biomaterials · doi:10.1016/j.biomaterials.2014.04.064 · Cited by 630
Coaxial nozzle-assisted 3D bioprinting with built-in microchannels for nutrients delivery
Gao, Q., He, Y., Fu, J.-Z., Liu, A., & Ma, L. (2015) · Biomaterials · doi:10.1016/j.biomaterials.2015.05.031 · Cited by 630
Xing, J.-F., Zheng, M.-L., & Duan, X.-M. (2015) · Chemical Society Reviews · doi:10.1039/c5cs00278h · Cited by 628
Landers, R., Hübner, U., Schmelzeisen, R., & Mülhaupt, R. (2002) · Biomaterials · doi:10.1016/s0142-9612(02)00139-4 · Cited by 624
A liver-on-a-chip platform with bioprinted hepatic spheroids
Bhise, N. S., Manoharan, V., Massa, S., Tamayol, A., Ghaderi, M., Miscuglio, M., Lang, Q., Shrike Zhang, Y., Shin, S. R., Calzone, G., et al. (2016) · Biofabrication · doi:10.1088/1758-5090/8/1/014101 · Cited by 615
Xu, T., Zhao, W., Zhu, J.-M., Albanna, M. Z., Yoo, J. J., & Atala, A. (2013) · Biomaterials · doi:10.1016/j.biomaterials.2012.09.035 · Cited by 607
Farahani, R. D., Dubé, M., & Therriault, D. (2016) · Advanced Materials · doi:10.1002/adma.201506215 · Cited by 604
Peripheral nerve regeneration: Experimental strategies and future perspectives
Faroni, A., Mobasseri, S. A., Kingham, P. J., & Reid, A. J. (2015) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2014.11.010 · Cited by 592
Thermal Inkjet Printing in Tissue Engineering and Regenerative Medicine
Cui, X., Boland, T., D.D'Lima, D., & K. Lotz, M. (2012) · Recent Patents on Drug Delivery & Formulation · doi:10.2174/187221112800672949 · Cited by 581
Cell and organ printing 1: Protein and cell printers
Wilson, W. C., & Boland, T. (2003) · The Anatomical Record Part A: Discoveries in Molecular, Cellular, and Evolutionary Biology · doi:10.1002/ar.a.10057 · Cited by 531
Viability and electrophysiology of neural cell structures generated by the inkjet printing method
Xu, T., Gregory, C. A., Molnar, P., Cui, X., Jalota, S., Bhaduri, S. B., & Boland, T. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2006.01.048 · Cited by 520
Extracellular matrix-based biomaterial scaffolds and the host response
Aamodt, J. M., & Grainger, D. W. (2016) · Biomaterials · doi:10.1016/j.biomaterials.2016.02.003 · Cited by 509
Direct writing in three dimensions
Lewis, J. A., & Gratson, G. M. (2004) · Materials Today · doi:10.1016/s1369-7021(04)00344-x · Cited by 507
Small-diameter vascular tissue engineering
Seifu, D. G., Purnama, A., Mequanint, K., & Mantovani, D. (2013) · Nature Reviews Cardiology · doi:10.1038/nrcardio.2013.77 · Cited by 501
Creating perfused functional vascular channels using 3D bio-printing technology
Lee, V. K., Kim, D. Y., Ngo, H., Lee, Y., Seo, L., Yoo, S.-S., Vincent, P. A., & Dai, G. (2014) · Biomaterials · doi:10.1016/j.biomaterials.2014.05.083 · Cited by 494
4D printing smart biomedical scaffolds with novel soybean oil epoxidized acrylate
Miao, S., Zhu, W., Castro, N. J., Nowicki, M., Zhou, X., Cui, H., Fisher, J. P., & Zhang, L. G. (2016) · Scientific Reports · doi:10.1038/srep27226 · Cited by 477
Self-citationBiomaterials for Integration with 3-D Bioprinting
Skardal, A., & Atala, A. (2015) · Annals of Biomedical Engineering · doi:10.1007/s10439-014-1207-1 · Cited by 474
Current Status of Bioinks for Micro-Extrusion-Based 3D Bioprinting
Panwar, A., & Tan, L. (2016) · Molecules · doi:10.3390/molecules21060685 · Cited by 472
Recent advances in the use of gelatin in biomedical research
Su, K., & Wang, C. (2015) · Biotechnology Letters · doi:10.1007/s10529-015-1907-0 · Cited by 461
3D printing of layered brain-like structures using peptide modified gellan gum substrates
Lozano, R., Stevens, L., Thompson, B. C., Gilmore, K. J., Gorkin, R., Stewart, E. M., in het Panhuis, M., Romero-Ortega, M., & Wallace, G. G. (2015) · Biomaterials · doi:10.1016/j.biomaterials.2015.07.022 · Cited by 445
Direct‐write bioprinting three‐dimensional biohybrid systems for future regenerative therapies
Chang, C. C., Boland, E. D., Williams, S. K., & Hoying, J. B. (2011) · Journal of Biomedical Materials Research Part B: Applied Biomaterials · doi:10.1002/jbm.b.31831 · Cited by 445
Duan, B., Kapetanovic, E., Hockaday, L. A., & Butcher, J. T. (2014) · Acta Biomaterialia · doi:10.1016/j.actbio.2013.12.005 · Cited by 436
Biomimetic and Bioinspired Synthesis of Nanomaterials/Nanostructures
Zan, G., & Wu, Q. (2016) · Advanced Materials · doi:10.1002/adma.201503215 · Cited by 434
Fluid shear stress threshold regulates angiogenic sprouting
Galie, P. A., Nguyen, D.-H. T., Choi, C. K., Cohen, D. M., Janmey, P. A., & Chen, C. S. (2014) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1310842111 · Cited by 421
Hsieh, F.-Y., Lin, H.-H., & Hsu, S.-H. (2015) · Biomaterials · doi:10.1016/j.biomaterials.2015.08.028 · Cited by 420
Engineering biological structures of prescribed shape using self-assembling multicellular systems
Jakab, K., Neagu, A., Mironov, V., Markwald, R. R., & Forgacs, G. (2004) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.0400164101 · Cited by 394
Microfabricated Biomaterials for Engineering 3D Tissues
Zorlutuna, P., Annabi, N., Camci‐Unal, G., Nikkhah, M., Cha, J. M., Nichol, J. W., Manbachi, A., Bae, H., Chen, S., & Khademhosseini, A. (2012) · Advanced Materials · doi:10.1002/adma.201104631 · Cited by 394
Bio-printing of collagen and VEGF-releasing fibrin gel scaffolds for neural stem cell culture
Lee, Y.-B., Polio, S., Lee, W., Dai, G., Menon, L., Carroll, R. S., & Yoo, S.-S. (2010) · Experimental Neurology · doi:10.1016/j.expneurol.2010.02.014 · Cited by 388
Cardiac tissue engineering using tissue printing technology and human cardiac progenitor cells
Gaetani, R., Doevendans, P. A., Metz, C. H. G., Alblas, J., Messina, E., Giacomello, A., & Sluijter, J. P. G. (2012) · Biomaterials · doi:10.1016/j.biomaterials.2011.11.003 · Cited by 383
Lin, H., Zhang, D., Alexander, P. G., Yang, G., Tan, J., Cheng, A. W.-M., & Tuan, R. S. (2013) · Biomaterials · doi:10.1016/j.biomaterials.2012.09.048 · Cited by 382
Functional 3D Neural Mini‐Tissues from Printed Gel‐Based Bioink and Human Neural Stem Cells
Gu, Q., Tomaskovic‐Crook, E., Lozano, R., Chen, Y., Kapsa, R. M., Zhou, Q., Wallace, G. G., & Crook, J. M. (2016) · Advanced Healthcare Materials · doi:10.1002/adhm.201600095 · Cited by 376
Engineering growth factors for regenerative medicine applications
Mitchell, A. C., Briquez, P. S., Hubbell, J. A., & Cochran, J. R. (2016) · Acta Biomaterialia · doi:10.1016/j.actbio.2015.11.007 · Cited by 372
Biomimetic 3D tissue printing for soft tissue regeneration
Pati, F., Ha, D.-H., Jang, J., Han, H. H., Rhie, J.-W., & Cho, D.-W. (2015) · Biomaterials · doi:10.1016/j.biomaterials.2015.05.043 · Cited by 368
Scaffold‐free inkjet printing of three‐dimensional zigzag cellular tubes
Xu, C., Chai, W., Huang, Y., & Markwald, R. R. (2012) · Biotechnology and Bioengineering · doi:10.1002/bit.24591 · Cited by 357
Generation of Three-Dimensional Hepatocyte/Gelatin Structures with Rapid Prototyping System
Wang, X., Yan, Y., Pan, Y., Xiong, Z., Liu, H., Cheng, J., Liu, F., Lin, F., Wu, R., Zhang, R., et al. (2006) · Tissue Engineering · doi:10.1089/ten.2006.12.83 · Cited by 353
Patterning human stem cells and endothelial cells with laser printing for cardiac regeneration
Gaebel, R., Ma, N., Liu, J., Guan, J., Koch, L., Klopsch, C., Gruene, M., Toelk, A., Wang, W., Mark, P., et al. (2011) · Biomaterials · doi:10.1016/j.biomaterials.2011.08.071 · Cited by 351
Multi‐nozzle deposition for construction of 3D biopolymer tissue scaffolds
Khalil, S., Nam, J., & Sun, W. (2005) · Rapid Prototyping Journal · doi:10.1108/13552540510573347 · Cited by 351
Bioprinting scale-up tissue and organ constructs for transplantation
Ozbolat, I. T. (2015) · Trends in Biotechnology · doi:10.1016/j.tibtech.2015.04.005 · Cited by 350
Toward engineering functional organ modules by additive manufacturing
Marga, F., Jakab, K., Khatiwala, C., Shepherd, B., Dorfman, S., Hubbard, B., Colbert, S., & Gabor, F. (2012) · Biofabrication · doi:10.1088/1758-5082/4/2/022001 · Cited by 348
Jang, J., Kim, T. G., Kim, B. S., Kim, S.-W., Kwon, S.-M., & Cho, D.-W. (2016) · Acta Biomaterialia · doi:10.1016/j.actbio.2016.01.013 · Cited by 344
Organ printing: from bioprinter to organ biofabrication line
Mironov, V., Kasyanov, V., & Markwald, R. R. (2011) · Current Opinion in Biotechnology · doi:10.1016/j.copbio.2011.02.006 · Cited by 343
Gribova, V., Auzely-Velty, R., & Picart, C. (2012) · Chemistry of Materials · doi:10.1021/cm2032459 · Cited by 338
Survival and Proliferative Ability of Various Living Cell Types after Laser-Induced Forward Transfer
Hopp, B., Smausz, T., Kresz, N., Barna, N., Bor, Z., Kolozsvári, L., Chrisey, D. B., Szabó, A., & Nógrádi, A. (2005) · Tissue Engineering · doi:10.1089/ten.2005.11.1817 · Cited by 333
Single cell epitaxy by acoustic picolitre droplets
Demirci, U., & Montesano, G. (2007) · Lab on a Chip · doi:10.1039/b704965j · Cited by 326
Stereolithography in tissue engineering
Skoog, S. A., Goering, P. L., & Narayan, R. J. (2014) · Journal of Materials Science: Materials in Medicine · doi:10.1007/s10856-013-5107-y · Cited by 321
State-of-the-Art Review of 3D Bioprinting for Cardiovascular Tissue Engineering
Duan, B. (2017) · Annals of Biomedical Engineering · doi:10.1007/s10439-016-1607-5 · Cited by 314
3D Bioprinting a Cell-Laden Bone Matrix for Breast Cancer Metastasis Study
Zhou, X., Zhu, W., Nowicki, M., Miao, S., Cui, H., Holmes, B., Glazer, R. I., & Zhang, L. G. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b10673 · Cited by 307
Self-citationEvolution of Bioinks and Additive Manufacturing Technologies for 3D Bioprinting
Jose, R. R., Rodriguez, M. J., Dixon, T. A., Omenetto, F., & Kaplan, D. L. (2016) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.6b00088 · Cited by 302
3D Bioprinting of Tissue/Organ Models
Pati, F., Gantelius, J., & Svahn, H. A. (2016) · Angewandte Chemie International Edition · doi:10.1002/anie.201505062 · Cited by 301
Laser-guided direct writing of living cells
Odde, D. J., & Renn, M. J. (2000) · Biotechnology and Bioengineering · doi:10.1002/(sici)1097-0290(20000205)67:3<312::aid-bit7>3.0.co;2-f · Cited by 297
Polyelectrolyte multilayered assemblies in biomedical technologies
Costa, R. R., & Mano, J. F. (2014) · Chemical Society Reviews · doi:10.1039/c3cs60393h · Cited by 296
Powder-based 3D printing for bone tissue engineering
Brunello, G., Sivolella, S., Meneghello, R., Ferroni, L., Gardin, C., Piattelli, A., Zavan, B., & Bressan, E. (2016) · Biotechnology Advances · doi:10.1016/j.biotechadv.2016.03.009 · Cited by 296
Recent developments in 3D printable composite materials
Kalsoom, U., Nesterenko, P. N., & Paull, B. (2016) · RSC Advances · doi:10.1039/c6ra11334f · Cited by 294
3D printed anatomical nerve regeneration pathways
Johnson, B. N., Lancaster, K. Z., Zhen, G., He, J., Gupta, M. K., Kong, Y. L., Engel, E. A., Krick, K. D., Ju, A., Meng, F., et al. (2015) · Advanced Functional Materials · doi:10.1002/adfm.201501760 · Cited by 293
Pfister, A., Landers, R., Laib, A., Hübner, U., Schmelzeisen, R., & Mülhaupt, R. (2004) · Journal of Polymer Science Part A: Polymer Chemistry · doi:10.1002/pola.10807 · Cited by 284
Invited review: activity-induced angiogenesis
Egginton, S. (2009) · Pflügers Archiv - European Journal of Physiology · doi:10.1007/s00424-008-0563-9 · Cited by 259
Hung, K.-C., Tseng, C.-S., Dai, L.-G., & Hsu, S.-H. (2016) · Biomaterials · doi:10.1016/j.biomaterials.2016.01.019 · Cited by 251
Biofabrication of a three-dimensional liver micro-organ as an in vitro drug metabolism model
Chang, R., Emami, K., Wu, H., & Sun, W. (2010) · Biofabrication · doi:10.1088/1758-5082/2/4/045004 · Cited by 247
3-dimensional bioprinting for tissue engineering applications
Gu, B. K., Choi, D. J., Park, S. J., Kim, M. S., Kang, C. M., & Kim, C.-H. (2016) · Biomaterials Research · doi:10.1186/s40824-016-0058-2 · Cited by 232
In vitro study of directly bioprinted perfusable vasculature conduits
Zhang, Y., Yu, Y., Akkouch, A., Dababneh, A., Dolati, F., & Ozbolat, I. T. (2015) · Biomaterials Science · doi:10.1039/c4bm00234b · Cited by 226
3D Printing Gets a Boost and Opportunities with Polymer Materials
Hofmann, M. (2014) · ACS Macro Letters · doi:10.1021/mz4006556 · Cited by 225
Towards organ printing: engineering an intra-organ branched vascular tree
Visconti, R. P., Kasyanov, V., Gentile, C., Zhang, J., Markwald, R. R., & Mironov, V. (2010) · Expert Opinion on Biological Therapy · doi:10.1517/14712590903563352 · Cited by 224
Gonçalves, E. M., Oliveira, F. J., Silva, R. F., Neto, M. A., Fernandes, M. H., Amaral, M., Vallet‐Regí, M., & Vila, M. (2016) · Journal of Biomedical Materials Research Part B: Applied Biomaterials · doi:10.1002/jbm.b.33432 · Cited by 221
Lee, S. J., Lee, D., Yoon, T. R., Kim, H. K., Jo, H. H., Park, J. S., Lee, J. H., Kim, W. D., Kwon, I. K., & Park, S. A. (2016) · Acta Biomaterialia · doi:10.1016/j.actbio.2016.02.006 · Cited by 221
Tissue Engineering Applications of Three-Dimensional Bioprinting
Zhang, X., & Zhang, Y. (2015) · Cell Biochemistry and Biophysics · doi:10.1007/s12013-015-0531-x · Cited by 218
Biocompatibility evaluation of tissue-engineered decellularized scaffolds for biomedical application
Hussein, K. H., Park, K.-M., Kang, K.-S., & Woo, H.-M. (2016) · Materials Science and Engineering: C · doi:10.1016/j.msec.2016.05.068 · Cited by 218
Bio-ink for on-demand printing of living cells
Ferris, C. J., Gilmore, K. J., Beirne, S., McCallum, D., Wallace, G. G., & in het Panhuis, M. (2013) · Biomater. Sci. · doi:10.1039/c2bm00114d · Cited by 214
Castilho, M., Moseke, C., Ewald, A., Gbureck, U., Groll, J., Pires, I., Teßmar, J., & Vorndran, E. (2014) · Biofabrication · doi:10.1088/1758-5082/6/1/015006 · Cited by 211
Extracellular matrix bioscaffolds in tissue remodeling and morphogenesis
Swinehart, I. T., & Badylak, S. F. (2016) · Developmental Dynamics · doi:10.1002/dvdy.24379 · Cited by 208
Adult rat retinal ganglion cells and glia can be printed by piezoelectric inkjet printing
Lorber, B., Hsiao, W.-K., Hutchings, I. M., & Martin, K. R. (2013) · Biofabrication · doi:10.1088/1758-5082/6/1/015001 · Cited by 207
Inkjet Printing of Regenerated Silk Fibroin: From Printable Forms to Printable Functions
Tao, H., Marelli, B., Yang, M., An, B., Onses, M. S., Rogers, J. A., Kaplan, D. L., & Omenetto, F. G. (2015) · Advanced Materials · doi:10.1002/adma.201501425 · Cited by 205
Biofabrication and testing of a fully cellular nerve graft
Owens, C. M., Marga, F., Forgacs, G., & Heesch, C. M. (2013) · Biofabrication · doi:10.1088/1758-5082/5/4/045007 · Cited by 204
Three-Dimensional Printing of Nanomaterial Scaffolds for Complex Tissue Regeneration
O'Brien, C. M., Holmes, B., Faucett, S., & Zhang, L. G. (2015) · Tissue Engineering Part B: Reviews · doi:10.1089/ten.teb.2014.0168 · Cited by 201
Self-citationBioprinting towards physiologically relevant tissue models for pharmaceutics
Peng, W., Unutmaz, D., & Ozbolat, I. T. (2016) · Trends in Biotechnology · doi:10.1016/j.tibtech.2016.05.013 · Cited by 196
Vasa Vasorum in Normal and Diseased Arteries
Mulligan-Kehoe, M. J., & Simons, M. (2014) · Circulation · doi:10.1161/circulationaha.113.007189 · Cited by 195
Microglia in central nervous system repair after injury
Jin, X., & Yamashita, T. (2016) · Journal of Biochemistry · doi:10.1093/jb/mvw009 · Cited by 191
Park, J. Y., Shim, J.-H., Choi, S.-A., Jang, J., Kim, M., Lee, S. H., & Cho, D.-W. (2015) · Journal of Materials Chemistry B · doi:10.1039/c5tb00637f · Cited by 188
Miao, S., Zhu, W., Castro, N. J., Leng, J., & Zhang, L. G. (2016) · Tissue Engineering Part C: Methods · doi:10.1089/ten.tec.2015.0542 · Cited by 187
Self-citationCui, H., Zhu, W., Nowicki, M., Zhou, X., Khademhosseini, A., & Zhang, L. G. (2016) · Advanced Healthcare Materials · doi:10.1002/adhm.201600505 · Cited by 185
Self-citationKumar Giri, T., Thakur, D., Ajazuddin, Badwaik, H., & Krishna Tripathi, D. (2012) · Current Drug Delivery · doi:10.2174/156720112803529800 · Cited by 183
Development of ‘Multi-arm Bioprinter’ for hybrid biofabrication of tissue engineering constructs
Ozbolat, I. T., Chen, H., & Yu, Y. (2014) · Robotics and Computer-Integrated Manufacturing · doi:10.1016/j.rcim.2013.10.005 · Cited by 182
Direct Fabrication of a Hybrid Cell/Hydrogel Construct by a Double-nozzle Assembling Technology
Li, S., Xiong, Z., Wang, X., Yan, Y., Liu, H., & Zhang, R. (2009) · Journal of Bioactive and Compatible Polymers · doi:10.1177/0883911509104094 · Cited by 180
Direct Bioprinting of Vessel-Like Tubular Microfluidic Channels
Zhang, Y., Yu, Y., & Ozbolat, I. T. (2013) · Journal of Nanotechnology in Engineering and Medicine · doi:10.1115/1.4024398 · Cited by 178
Layer‐by‐Layer Assembly of 3D Tissue Constructs with Functionalized Graphene
Shin, S. R., Aghaei‐Ghareh‐Bolagh, B., Gao, X., Nikkhah, M., Jung, S. M., Dolatshahi‐Pirouz, A., Kim, S. B., Kim, S. M., Dokmeci, M. R., Tang, X. (., et al. (2014) · Advanced Functional Materials · doi:10.1002/adfm.201401300 · Cited by 173
Nanomaterials design and tests for neural tissue engineering
Saracino, G. A. A., Cigognini, D., Silva, D., Caprini, A., & Gelain, F. (2013) · Chem. Soc. Rev. · doi:10.1039/c2cs35065c · Cited by 172
Wu, P. K., & Ringeisen, B. R. (2010) · Biofabrication · doi:10.1088/1758-5082/2/1/014111 · Cited by 168
Design principles for therapeutic angiogenic materials
Briquez, P. S., Clegg, L. E., Martino, M. M., Gabhann, F. M., & Hubbell, J. A. (2016) · Nature Reviews Materials · doi:10.1038/natrevmats.2015.6 · Cited by 166
Biomaterial-based scaffolds – current status and future directions
Garg, T., & Goyal, A. K. (2014) · Expert Opinion on Drug Delivery · doi:10.1517/17425247.2014.891014 · Cited by 165
3D‐Printed Biodegradable Polymeric Vascular Grafts
Melchiorri, A. J., Hibino, N., Best, C. A., Yi, T., Lee, Y. U., Kraynak, C. A., Kimerer, L. K., Krieger, A., Kim, P., Breuer, C. K., et al. (2016) · Advanced Healthcare Materials · doi:10.1002/adhm.201500725 · Cited by 165
Self-citation3D Printing of Personalized Artificial Bone Scaffolds
Jariwala, S. H., Lewis, G. S., Bushman, Z. J., Adair, J. H., & Donahue, H. J. (2015) · 3D Printing and Additive Manufacturing · doi:10.1089/3dp.2015.0001 · Cited by 164
3D Powder Printing of β‐Tricalcium Phosphate Ceramics Using Different Strategies
Vorndran, E., Klarner, M., Klammert, U., Grover, L. M., Patel, S., Barralet, J. E., & Gbureck, U. (2008) · Advanced Engineering Materials · doi:10.1002/adem.200800179 · Cited by 164
Nerve guides manufactured from photocurable polymers to aid peripheral nerve repair
Pateman, C. J., Harding, A. J., Glen, A., Taylor, C. S., Christmas, C. R., Robinson, P. P., Rimmer, S., Boissonade, F. M., Claeyssens, F., & Haycock, J. W. (2015) · Biomaterials · doi:10.1016/j.biomaterials.2015.01.055 · Cited by 164
Three-dimensional bioprinting of rat embryonic neural cells
Lee, W., Pinckney, J., Lee, V., Lee, J.-H., Fischer, K., Polio, S., Park, J.-K., & Yoo, S.-S. (2009) · NeuroReport · doi:10.1097/wnr.0b013e32832b8be4 · Cited by 162
3D-engineering of Cellularized Conduits for Peripheral Nerve Regeneration
Hu, Y. X., Wu, Y., Gou, Z., Tao, J., Zhang, J., Liu, Q., Kang, T., Jiang, S., Huang, S., He, J., et al. (2016) · Scientific Reports · doi:10.1038/srep32184 · Cited by 161
High‐Resolution Projection Microstereolithography for Patterning of Neovasculature
Raman, R., Bhaduri, B., Mir, M., Shkumatov, A., Lee, M. K., Popescu, G., Kong, H., & Bashir, R. (2016) · Advanced Healthcare Materials · doi:10.1002/adhm.201500721 · Cited by 159
Trends in Tissue Engineering for Blood Vessels
Nemeno-Guanzon, J. G., Lee, S., Berg, J. R., Jo, Y. H., Yeo, J. E., Nam, B. M., Koh, Y.-G., & Lee, J. I. (2012) · Journal of Biomedicine and Biotechnology · doi:10.1155/2012/956345 · Cited by 158
Formation of Blood Clot on Biomaterial Implants Influences Bone Healing
Shiu, H. T., Goss, B. G. S., Lutton, C., Crawford, R., & Xiao, Y. (2014) · Tissue Engineering Part B Reviews · doi:10.1089/ten.teb.2013.0709 · Cited by 156
Cui, H., Zhu, W., Holmes, B. B., & Zhang, L. G. (2016) · Advanced Science · doi:10.1002/advs.201600058 · Cited by 155
Self-citation3D printing facilitated scaffold-free tissue unit fabrication
Tan, Y. J., Richards, D., Trusk, T. C., Visconti, R. P., Yost, M. J., Kindy, M. S., Drake, C. J., Argraves, W. S., Markwald, R. R., & Mei, Y. (2014) · Biofabrication · doi:10.1088/1758-5082/6/2/024111 · Cited by 154
Holmes, B. B., Bulusu, K. V., Plesniak, M. W., & Zhang, L. G. (2016) · Nanotechnology · doi:10.1088/0957-4484/27/6/064001 · Cited by 152
Self-citationBiophysical Responses upon the Interaction of Nanomaterials with Cellular Interfaces
Wu, Y., Putcha, N., Ng, K. W., Leong, D. T., Lim, C. T., Loo, S. C. J., & Chen, X. (2012) · Accounts of Chemical Research · doi:10.1021/ar300046u · Cited by 150
Bioconjugated Hydrogels for Tissue Engineering and Regenerative Medicine
Ahadian, S., Sadeghian, R. B., Salehi, S., Ostrovidov, S., Bae, H., Ramalingam, M., & Khademhosseini, A. (2015) · Bioconjugate Chemistry · doi:10.1021/acs.bioconjchem.5b00360 · Cited by 150
Cell culture in autologous fibrin scaffolds for applications in tissue engineering
de la Puente, P., & Ludeña, D. (2014) · Experimental Cell Research · doi:10.1016/j.yexcr.2013.12.017 · Cited by 149
Luo, Y., Lode, A., & Gelinsky, M. (2012) · Advanced Healthcare Materials · doi:10.1002/adhm.201200303 · Cited by 147
A novel tissue-engineered trachea with a mechanical behavior similar to native trachea
Park, J., Hong, J. M., Ju, Y. M., Jung, J. W., Kang, H.-W., Lee, S. J., Yoo, J. J., Kim, S. W., Kim, S. H., & Cho, D. (2015) · Biomaterials · doi:10.1016/j.biomaterials.2015.05.008 · Cited by 143
Widmaier, E. B. E. P., Raff, H., & Strang, K. T. (2005) · Cited by 143
What Is the Biological and Clinical Relevance of Fibrin?
Litvinov, R. I., & Weisel, J. W. (2016) · Seminars in Thrombosis and Hemostasis · doi:10.1055/s-0036-1571342 · Cited by 142
Zhou, X., Castro, N. J., Zhu, W., Cui, H., Aliabouzar, M., Sarkar, K., & Zhang, L. G. (2016) · Scientific Reports · doi:10.1038/srep32876 · Cited by 142
Self-citation3D-printed fluidic networks as vasculature for engineered tissue
Kinstlinger, I. S., & Miller, J. S. (2016) · Lab on a Chip · doi:10.1039/c6lc00193a · Cited by 141
Experimental strategies to promote axonal regeneration after traumatic central nervous system injury
Stichel, C. C., & Müller, H. W. (1998) · Progress in Neurobiology · doi:10.1016/s0301-0082(98)00033-1 · Cited by 139
Jung, J. W., Lee, J., & Cho, D. (2016) · Scientific Reports · doi:10.1038/srep21685 · Cited by 133
Scaffolds in vascular regeneration: current status
Nair, P. D., & Thottappillil, N. (2015) · Vascular Health and Risk Management · doi:10.2147/vhrm.s50536 · Cited by 131
Solid freeform fabrication of designer scaffolds of hyaluronic acid for nerve tissue engineering
Suri, S., Han, L., Zhang, W., Singh, A. K., Chen, S., & Schmidt, C. E. (2011) · Biomedical Microdevices · doi:10.1007/s10544-011-9568-9 · Cited by 128
Davidson, J. R., Appuhamillage, G. A., Thompson, C. M., Voit, W. E., & Smaldone, R. A. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b05118 · Cited by 127
Micro-precise spatiotemporal delivery system embedded in 3D printing for complex tissue regeneration
Tarafder, S., Koch, A., Jun, Y., Chou, C., Awadallah, M. R., & Lee, C. H. (2016) · Biofabrication · doi:10.1088/1758-5090/8/2/025003 · Cited by 126
Zhu, W., Masood, F., O'Brien, J. R., et al. (2015) · Nanomedicine Nanotechnology Biology and Medicine · doi:10.1016/j.nano.2014.12.001 · Cited by 124
3D Nano/Microfabrication Techniques and Nanobiomaterials for Neural Tissue Regeneration
Zhu, W., O’Brien, C., O'Brien, J. R., & Zhang, L. G. (2014) · Nanomedicine · doi:10.2217/nnm.14.36 · Cited by 122
Self-citationEngineering of arteries in vitro
Huang, A., & Niklason, L. E. (2014) · Cellular and Molecular Life Sciences · doi:10.1007/s00018-013-1546-3 · Cited by 118
Tissue vascularization through 3D printing: Will technology bring us flow?
Paulsen, S. J., & Miller, J. S. (2015) · Developmental Dynamics · doi:10.1002/dvdy.24254 · Cited by 115
Cui, H., Shao, J., Wang, Y., Zhang, P., Chen, X., & Wei, Y. (2013) · Biomacromolecules · doi:10.1021/bm4002766 · Cited by 115
Self-citationShim, J., Kim, S. E., Park, J. Y., Kundu, J., Kim, S. W., Kang, S. S., & Cho, D. (2014) · Tissue Engineering Part A · doi:10.1089/ten.tea.2013.0513 · Cited by 112
Personalized development of human organs using 3D printing technology
Radenković, D., Solouk, A., & Seifalian, A. M. (2015) · Medical Hypotheses · doi:10.1016/j.mehy.2015.12.017 · Cited by 111
Cui, H., Liu, Y., Cheng, Y., Zhang, Z., Zhang, P., Chen, X., & Wei, Y. (2014) · Biomacromolecules · doi:10.1021/bm4018963 · Cited by 110
Self-citation3D bioprinting: A new insight into the therapeutic strategy of neural tissue regeneration
Hsieh, F.-Y., & Hsu, S. (2015) · Organogenesis · doi:10.1080/15476278.2015.1123360 · Cited by 102
Recent Strategies in Tissue Engineering for Guided Peripheral Nerve Regeneration
Belanger, K., Dinis, T., Taourirt, S., Vidal, G., Kaplan, D. L., & Egles, C. (2016) · Macromolecular Bioscience · doi:10.1002/mabi.201500367 · Cited by 100
Yi, Y., Park, Y., Choi, H., Lee, K., Kim, S., Kim, K., Oh, S., & Shim, J. (2015) · Journal of Nanomaterials · doi:10.1155/2015/581713 · Cited by 99
Nishiyama, Y., Henmi, C., Iwanaga, S., Nakagawa, H., Yamaguchi, K., Akita, K., Mochizuki, S., Takiura, K., & Nakamura, M. (2008) · Journal of Imaging Science and Technology · doi:10.2352/j.imagingsci.technol.(2008)52:6(060201 · Cited by 94
Development of Novel Three-Dimensional Printed Scaffolds for Osteochondral Regeneration
Holmes, B. B., Zhu, W., Li, J., Lee, J. D., & Zhang, L. G. (2014) · Tissue Engineering Part A · doi:10.1089/ten.tea.2014.0138 · Cited by 92
Self-citationStrategies for organ level tissue engineering
Rustad, K. C., Sorkin, M., Lévi, B., Longaker, M. T., & Gurtner, G. C. (2010) · Organogenesis · doi:10.4161/org.6.3.12139 · Cited by 91
Cui, H., Cui, L., Zhang, P., Huang, Y., Wei, Y., & Chen, X. (2013) · Macromolecular Bioscience · doi:10.1002/mabi.201300366 · Cited by 88
Self-citationSoft Polymers for Building up Small and Smallest Blood Supplying Systems by Stereolithography
Meyer, W., Engelhardt, S., Novosel, E. C., Elling, B., Wegener, M., & Krüger, H. (2012) · Journal of Functional Biomaterials · doi:10.3390/jfb3020257 · Cited by 86
Zhu, W., Wang, M., Fu, Y., Castro, N. J., Fu, S. W., & Zhang, L. G. (2014) · Acta Biomaterialia · doi:10.1016/j.actbio.2014.12.008 · Cited by 86
Self-citationAn Electrohydrodynamic Bioprinter for Alginate Hydrogels Containing Living Cells
Gasperini, L., Maniglio, D., Motta, A., & Migliaresi, C. (2014) · Tissue Engineering Part C Methods · doi:10.1089/ten.tec.2014.0149 · Cited by 82
Development of Novel 3-D Printed Scaffolds With Core-Shell Nanoparticles for Nerve Regeneration
Lee, S., Zhu, W., Heyburn, L., Nowicki, M. A., Harris, B. T., & Zhang, L. G. (2016) · IEEE Transactions on Biomedical Engineering · doi:10.1109/tbme.2016.2558493 · Cited by 82
Self-citationThree-Dimensional Printing of Tissue/Organ Analogues Containing Living Cells
Park, J., Jang, J., Lee, J., & Cho, D. (2016) · Annals of Biomedical Engineering · doi:10.1007/s10439-016-1611-9 · Cited by 81
Biodegradable Polymers and Stem Cells for Bioprinting
Lei, M., & Wang, X. (2016) · Molecules · doi:10.3390/molecules21050539 · Cited by 81
A 3D printed nano bone matrix for characterization of breast cancer cell and osteoblast interactions
Zhu, W., Castro, N. J., Cui, H., Zhou, X., Boualam, B., McGrane, R., Glazer, R. I., & Zhang, L. G. (2016) · Nanotechnology · doi:10.1088/0957-4484/27/31/315103 · Cited by 78
Self-citationHiguchi, A., Ling, Q., Kumar, S. S., Chang, Y., Alarfaj, A. A., Munusamy, M. A., Murugan, K., Hsu, S.-T., & Umezawa, A. (2015) · Journal of Materials Chemistry B · doi:10.1039/c5tb01276g · Cited by 77
Cui, H., Zhuang, X., He, C., Wei, Y., & Chen, X. (2014) · Acta Biomaterialia · doi:10.1016/j.actbio.2014.09.017 · Cited by 75
Self-citationKumar, A., Nune, K. C., & Misra, R. D. K. (2016) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.35664 · Cited by 74
Electrohydrodynamic jetting of mouse neuronal cells
Eagles, P. A. M., Qureshi, A., & Jayasinghe, S. N. (2006) · Biochemical Journal · doi:10.1042/bj20051838 · Cited by 72
Wang, Q., Xia, Q., Wu, Y., Zhang, X., Wen, F., Chen, X., Zhang, S., Heng, B. C., He, Y., & Ouyang, H. (2015) · Advanced Healthcare Materials · doi:10.1002/adhm.201500211 · Cited by 71
Utilizing stem cells for three-dimensional neural tissue engineering
Knowlton, S. M., Cho, Y. K., Li, X. J., Khademhosseini, A., & Taşoğlu, S. (2016) · Biomaterials Science · doi:10.1039/c5bm00324e · Cited by 69
3D printing of the liver in living donor liver transplantation
Ikegami, T., & Maehara, Y. (2013) · Nature Reviews Gastroenterology & Hepatology · doi:10.1038/nrgastro.2013.195 · Cited by 68
3D Bioprinting and Nanotechnology in Tissue Engineering and Regenerative Medicine
(2015) · Elsevier eBooks · doi:10.1016/c2013-0-18595-9 · Cited by 68
Baudis, S., Nehl, F., Ligon, S. C., Nigisch, A., Bergmeister, H., Bernhard, D., Stampfl, J., & Liska, R. (2011) · Biomedical Materials · doi:10.1088/1748-6041/6/5/055003 · Cited by 62
Vascular tissue engineering: building perfusable vasculature for implantation
Gui, L., & Niklason, L. E. (2013) · Current Opinion in Chemical Engineering · doi:10.1016/j.coche.2013.11.004 · Cited by 62
Progress and perspectives of neural tissue engineering
Gu, X. (2015) · Frontiers of Medicine · doi:10.1007/s11684-015-0415-x · Cited by 59
Controlled and Sequential Delivery of Fluorophores from 3D Printed Alginate-PLGA Tubes
Do, A., Akkouch, A., Green, B. J., Ozbolat, I. T., Debabneh, A., Geary, S. M., & Salem, A. K. (2016) · Annals of Biomedical Engineering · doi:10.1007/s10439-016-1648-9 · Cited by 58
Jia, C., Yu, D., Lamarre, M., Leopold, P. L., Teng, Y. D., & Wang, H. (2014) · Advanced Materials · doi:10.1002/adma.201403509 · Cited by 53
A novel in vitro three‐dimensional bioprinted liver tissue system for drug development
Robbins, J. B., Gorgen, V., Min, P., Shepherd, B. R., & Presnell, S. C. (2013) · The FASEB Journal · doi:10.1096/fasebj.27.1_supplement.872.12 · Cited by 52
3D printing for regenerative medicine: From bench to bedside
Li, J., He, L., Zhou, C., Zhou, Y., Bai, Y., Lee, F. Y., & Mao, J. J. (2015) · MRS Bulletin · doi:10.1557/mrs.2015.5 · Cited by 52
Cited by
3D Printing in Pharmaceutical and Medical Applications – Recent Achievements and Challenges
Jamróz, W., Szafraniec, J., Kurek, M., & Jachowicz, R. (2018) · Pharmaceutical Research · doi:10.1007/s11095-018-2454-x · Cited by 707
3D bioprinting of tissues and organs for regenerative medicine
Vijayavenkataraman, S., Yan, W.-C., Lu, W. F., Wang, C.-H., & Fuh, J. Y. H. (2018) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2018.07.004 · Cited by 630
Nanomaterial-Enabled Wearable Sensors for Healthcare
Yao, S., Swetha, P., & Zhu, Y. (2018) · Advanced Healthcare Materials · doi:10.1002/adhm.201700889 · Cited by 576
Recent Advances in Biomaterials for 3D Printing and Tissue Engineering
Jammalamadaka, U., & Tappa, K. (2018) · Journal of Functional Biomaterials · doi:10.3390/jfb9010022 · Cited by 526
4D Biofabrication Using Shape‐Morphing Hydrogels
Kirillova, A., Maxson, R., Stoychev, G., Gomillion, C. T., & Ionov, L. (2017) · Advanced Materials · doi:10.1002/adma.201703443 · Cited by 494
Metadata
- Authors
- Cui, H., Nowicki, M., Fisher, J. P., & Zhang, L. G.
- Venue
- Advanced Healthcare Materials
- Publisher
- Wiley
- Published
- 2016-12-20
- Volume
- 6
- Issue
- 1
- ISSN
- 2192-2640 (ISSN-L)
- 2192-2659
- OpenAlex
- W2561750927
- Cited by
- 535
- References
- 206
- FWCI
- 15.20
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.