Research Progress of Shape Memory Polymer and 4D Printing in Biomedical Application
The DOI matches its Crossref record; 277 of the 290 references it cites were found in a registry or an index.
Abstract
This review summarizes the application of shape memory polymers and 4D printing technology in bone tissue scaffolds, tracheal scaffolds, and drug release, and discusses adjustable biodegradability and tunable mechanical properties for biomedical devices.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Citations
Cites
Bioinspired structural materials
Wegst, U. G. K., Bai, H., Saiz, E., Tomsia, A. P., & Ritchie, R. O. (2015) · Nature Materials · doi:10.1038/nmat4089 · Cited by 4,721
Fischman, D. L., Leon, M. B., Baim, D. S., Schatz, R. A., Savage, M. P., Penn, I., Detre, K., Veltri, L., Ricci, D., Nobuyoshi, M., et al. (1994) · New England Journal of Medicine · doi:10.1056/nejm199408253310802 · Cited by 4,271
Morice, M.-C., Serruys, P. W., Sousa, J. E., Fajadet, J., Ban Hayashi, E., Perin, M., Colombo, A., Schuler, G., Barragan, P., Guagliumi, G., et al. (2002) · New England Journal of Medicine · doi:10.1056/nejmoa012843 · Cited by 4,033
Hydrogels in regenerative medicine
Slaughter, B. V., Khurshid, S. S., Fisher, O. Z., Khademhosseini, A., & Peppas, N. A. (2009) · Advanced Materials · doi:10.1002/adma.200802106 · Cited by 2,703
Exploring and Engineering the Cell Surface Interface
Stevens, M. M., & George, J. H. (2005) · Science · doi:10.1126/science.1106587 · Cited by 2,607
Light-induced shape-memory polymers
Lendlein, A., Jiang, H., Jünger, O., & Langer, R. (2005) · Nature · doi:10.1038/nature03496 · Cited by 2,006
Organic molecule-based photothermal agents: an expanding photothermal therapy universe
Jung, H. S., Verwilst, P., Sharma, A., Shin, J., Sessler, J. L., & Kim, J. S. (2018) · Chemical Society Reviews · doi:10.1039/c7cs00522a · Cited by 1,583
3D bioactive composite scaffolds for bone tissue engineering
Turnbull, G., Clarke, J., Picard, F., Riches, P., Jia, L., Han, F., Li, B., & Shu, W. (2018) · Bioactive Materials · doi:10.1016/j.bioactmat.2017.10.001 · Cited by 1,332
A Review of Shape Memory Polymers and Composites: Mechanisms, Materials, and Applications
Xia, Y., He, Y., Zhang, F., Liu, Y., & Leng, J. (2021) · Advanced Materials · doi:10.1002/adma.202000713 · Cited by 1,281
Self-citationHu, J., Zhu, Y., Huang, H., & Lu, J. (2012) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2012.06.001 · Cited by 1,279
Vascularization in tissue engineering
Rouwkema, J., Rivron, N. C., & van Blitterswijk, C. A. (2008) · Trends in Biotechnology · doi:10.1016/j.tibtech.2008.04.009 · Cited by 1,211
Biomaterials for bone tissue engineering
Stevens, M. M. (2008) · Materials Today · doi:10.1016/s1369-7021(08)70086-5 · Cited by 1,202
Momeni, F., M.Mehdi Hassani.N, S., Liu, X., & Ni, J. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.02.068 · Cited by 1,165
Multimaterial 4D Printing with Tailorable Shape Memory Polymers
Ge, Q., Sakhaei, A. H., Lee, H., Dunn, C. K., Fang, N. X., & Dunn, M. L. (2016) · Scientific Reports · doi:10.1038/srep31110 · Cited by 1,160
Min, B.-M., Lee, G., Kim, S. H., Nam, Y. S., Lee, T. S., & Park, W. H. (2004) · Biomaterials · doi:10.1016/j.biomaterials.2003.08.045 · Cited by 1,151
Nanotechnology and nanomaterials: Promises for improved tissue regeneration
Zhang, L., & Webster, T. J. (2009) · Nano Today · doi:10.1016/j.nantod.2008.10.014 · Cited by 1,143
Photomobile Polymer Materials: Towards Light‐Driven Plastic Motors
Yamada, M., Kondo, M., Mamiya, J., Yu, Y., Kinoshita, M., Barrett, C. J., & Ikeda, T. (2008) · Angewandte Chemie International Edition · doi:10.1002/anie.200800760 · Cited by 1,047
Metal–Organic Frameworks for Biomedical Applications
Yang, J., & Yang, Y. (2020) · Small · doi:10.1002/smll.201906846 · Cited by 998
3D printing of smart materials: A review on recent progresses in 4D printing
Khoo, Z. X., Teoh, J. E. M., Liu, Y., Chua, C. K., Yang, S., An, J., Leong, K. F., & Yeong, W. Y. (2015) · Virtual and Physical Prototyping · doi:10.1080/17452759.2015.1097054 · Cited by 912
Self-citationWoodard, J. R., Hilldore, A. J., Lan, S. K., Park, C. J., Morgan, A. W., Eurell, J. A. C., Clark, S. G., Wheeler, M. B., Jamison, R. D., & Wagoner Johnson, A. J. (2007) · Biomaterials · doi:10.1016/j.biomaterials.2006.08.021 · Cited by 829
Initial and 6-Month Results of Biodegradable Poly- l -Lactic Acid Coronary Stents in Humans
Tamai, H., Igaki, K., Kyo, E., Kosuga, K., Kawashima, A., Matsui, S., Komori, H., Tsuji, T., Motohara, S., & Uehata, H. (2000) · Circulation · doi:10.1161/01.cir.102.4.399 · Cited by 806
Coumarins in Polymers: From Light Harvesting to Photo-Cross-Linkable Tissue Scaffolds
Trenor, S. R., Shultz, A. R., Love, B. J., & Long, T. E. (2004) · Chemical Reviews · doi:10.1021/cr030037c · Cited by 790
Biological materials: Functional adaptations and bioinspired designs
Chen, P.-Y., McKittrick, J., & Meyers, M. A. (2012) · Progress in Materials Science · doi:10.1016/j.pmatsci.2012.03.001 · Cited by 766
Makvandi, P., Wang, C., Zare, E. N., Borzacchiello, A., Niu, L., & Tay, F. R. (2020) · Advanced Functional Materials · doi:10.1002/adfm.201910021 · Cited by 737
Ormiston, J. A., Serruys, P. W., Regar, E., Dudek, D., Thuesen, L., Webster, M. W., Onuma, Y., Garcia-Garcia, H. M., McGreevy, R., & Veldhof, S. (2008) · The Lancet · doi:10.1016/s0140-6736(08)60415-8 · Cited by 712
4D Bioprinting for Biomedical Applications
Gao, B., Yang, Q., Zhao, X., Jin, G., Ma, Y., & Xu, F. (2016) · Trends in Biotechnology · doi:10.1016/j.tibtech.2016.03.004 · Cited by 711
Bone Compressive Strength: The Influence of Density and Strain Rate
Carter, D. R., & Hayes, W. C. (1976) · Science · doi:10.1126/science.996549 · Cited by 709
Synthesis, structure, properties and applications of MXenes: Current status and perspectives
Ronchi, R. M., Arantes, J. T., & Santos, S. F. (2019) · Ceramics International · doi:10.1016/j.ceramint.2019.06.114 · Cited by 698
Direct 4D Printing Via Active Composite Materials
Ding, Z., Yuan, C., Peng, X., Wang, T., Qi, H. J., & Dunn, M. L. (2017) · Science Advances · doi:10.1126/sciadv.1602890 · Cited by 692
3D printing of bone tissue engineering scaffolds
Wang, C., Huang, W., Zhou, Y., He, L., He, Z., Chen, Z., He, X., Tian, S., Liao, J., Lu, B., et al. (2020) · Bioactive Materials · doi:10.1016/j.bioactmat.2020.01.004 · Cited by 661
Wagoner Johnson, A. J., & Herschler, B. A. (2011) · Acta Biomaterialia · doi:10.1016/j.actbio.2010.07.012 · Cited by 635
The effects of strontium-substituted bioactive glasses on osteoblasts and osteoclasts in vitro
Gentleman, E., Fredholm, Y. C., Jell, G., Lotfibakhshaiesh, N., O'Donnell, M. D., Hill, R. G., & Stevens, M. M. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.01.121 · Cited by 635
Yakacki, C. M., Shandas, R., Lanning, C., Rech, B., Eckstein, A., & Gall, K. (2007) · Biomaterials · doi:10.1016/j.biomaterials.2007.01.030 · Cited by 618
Water-driven programmable polyurethane shape memory polymer: Demonstration and mechanism
Huang, W. M., Yang, B., An, L., Li, C., & Chan, Y. S. (2005) · Applied Physics Letters · doi:10.1063/1.1880448 · Cited by 616
González-Henríquez, C. M., Sarabia-Vallejos, M. A., & Rodriguez-Hernandez, J. (2019) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2019.03.001 · Cited by 562
Mechanical properties and shape memory effect of 3D-printed PLA-based porous scaffolds
Senatov, F. S., Niaza, K. V., Zadorozhnyy, M. Y., Maksimkin, A. V., Kaloshkin, S. D., & Estrin, Y. Z. (2016) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2015.11.036 · Cited by 547
Yang, Y., Song, X., Li, X., Chen, Z., Zhou, C., Zhou, Q., & Chen, Y. (2018) · Advanced Materials · doi:10.1002/adma.201706539 · Cited by 538
Electromagnetic activation of shape memory polymer networks containing magnetic nanoparticles
Schmidt, A. M. (2006) · Macromolecular Rapid Communications · doi:10.1002/marc.200600225 · Cited by 518
3D-printed bioceramic scaffolds: From bone tissue engineering to tumor therapy.
Ma, H., Feng, C., Chang, J., & Wu, C. (2018) · Acta Biomaterialia · doi:10.1016/j.actbio.2018.08.026 · Cited by 512
Wei, H., Zhang, Q., Yao, Y., Liu, L., Liu, Y., & Leng, J. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b12824 · Cited by 504
Self-citationMorrison, R. J., Hollister, S. J., Niedner, M. F., Mahani, M. G., Park, A. H., Mehta, D. K., Ohye, R. G., & Green, G. E. (2015) · Science Translational Medicine · doi:10.1126/scitranslmed.3010825 · Cited by 498
Grüntzig, A., Vetter, W., Meier, B., Kuhlmann, U., Lütolf, U., & Siegenthaler, W. (1978) · The Lancet · doi:10.1016/s0140-6736(78)93000-3 · Cited by 490
Ultrafast Digital Printing toward 4D Shape Changing Materials
Huang, L., Jiang, R., Wu, J., Song, J., Bai, H., Li, B., Zhao, Q., & Xie, T. (2017) · Advanced Materials · doi:10.1002/adma.201605390 · Cited by 490
Polymeric triple-shape materials
Bellin, I., Kelch, S., Langer, R., & Lendlein, A. (2006) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.0608586103 · Cited by 481
Lu, W., Le, X., Zhang, J., Huang, Y., & Chen, T. (2017) · Chemical Society Reviews · doi:10.1039/c6cs00754f · Cited by 459
4D Printing of Shape Memory‐Based Personalized Endoluminal Medical Devices
Zarek, M., Mansour, N., Shapira, S., & Cohn, D. (2017) · Macromolecular Rapid Communications · doi:10.1002/marc.201600628 · Cited by 419
Flexible shape-memory scaffold for minimally invasive delivery of functional tissues
Montgomery, M., Ahadian, S., Davenport Huyer, L., Lo Rito, M., Civitarese, R. A., Vanderlaan, R. D., Wu, J., Reis, L. A., Momen, A., Akbari, S., et al. (2017) · Nature Materials · doi:10.1038/nmat4956 · Cited by 409
4D printing of polymeric materials for tissue and organ regeneration
Miao, S., Castro, N., Nowicki, M., Xia, L., Cui, H., Zhou, X., Zhu, W., Lee, S.-J., Sarkar, K., Vozzi, G., et al. (2017) · Materials Today · doi:10.1016/j.mattod.2017.06.005 · Cited by 408
Recent Advances in Shape Memory Soft Materials for Biomedical Applications
Chan, B. Q. Y., Low, Z. W. K., Heng, S. J. W., Chan, S. Y., Owh, C., & Loh, X. J. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b01295 · Cited by 377
Four-dimensional bioprinting: Current developments and applications in bone tissue engineering
Wan, Z., Zhang, P., Liu, Y., Lv, L., & Zhou, Y. (2020) · Acta Biomaterialia · doi:10.1016/j.actbio.2019.10.038 · Cited by 368
Self-citationInductively Heated Shape Memory Polymer for the Magnetic Actuation of Medical Devices
Buckley, P. R., McKinley, G. H., Wilson, T. S., Small, W., Benett, W. J., Bearinger, J. P., McElfresh, M. W., & Maitland, D. J. (2006) · IEEE Transactions on Biomedical Engineering · doi:10.1109/tbme.2006.877113 · Cited by 361
Han, D., Morde, R. S., Mariani, S., La Mattina, A. A., Vignali, E., Yang, C., Barillaro, G., & Lee, H. (2020) · Advanced Functional Materials · doi:10.1002/adfm.201909197 · Cited by 360
Zhang, Y., Li, Y., & Liu, W. (2015) · Advanced Functional Materials · doi:10.1002/adfm.201401989 · Cited by 355
Lee, S. J., Liu, J., Oh, S. H., Soker, S., Atala, A., & Yoo, J. J. (2008) · Biomaterials · doi:10.1016/j.biomaterials.2008.03.032 · Cited by 353
Self-folding all-polymer thermoresponsive microcapsules
Stoychev, G., Puretskiy, N., & Ionov, L. (2011) · Soft Matter · doi:10.1039/c1sm05109a · Cited by 348
Zartner, P., Cesnjevar, R., Singer, H., & Weyand, M. (2005) · Catheterization and Cardiovascular Interventions · doi:10.1002/ccd.20520 · Cited by 347
Wang, W., Caetano, G., Ambler, W., Blaker, J., Frade, M., Mandal, P., Diver, C., & Bártolo, P. (2016) · Materials · doi:10.3390/ma9120992 · Cited by 330
Gao, F., Xu, Z., Liang, Q., Liu, B., Li, H., Wu, Y., Zhang, Y., Lin, Z., Wu, M., Ruan, C., et al. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201706644 · Cited by 330
Zhang, B., Li, H., Cheng, J., Ye, H., Sakhaei, A. H., Yuan, C., Rao, P., Zhang, Y., Chen, Z., Wang, R., et al. (2021) · Advanced Materials · doi:10.1002/adma.202101298 · Cited by 330
4D printing of high performance shape memory polymer using stereolithography
Choong, Y. Y. C., Maleksaeedi, S., Eng, H., Wei, J., & Su, P.-C. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.04.049 · Cited by 328
Two-Way 4D Printing: A Review on the Reversibility of 3D-Printed Shape Memory Materials
Lee, A. Y., An, J., & Chua, C. K. (2017) · Engineering · doi:10.1016/j.eng.2017.05.014 · Cited by 326
Advances in Biomaterials and Technologies for Vascular Embolization
Hu, J., Albadawi, H., Chong, B. W., Deipolyi, A. R., Sheth, R. A., Khademhosseini, A., & Oklu, R. (2019) · Advanced Materials · doi:10.1002/adma.201901071 · Cited by 321
Shape memory polymers and their composites in biomedical applications
Zhao, W., Liu, L., Zhang, F., Leng, J., & Liu, Y. (2019) · Materials Science and Engineering: C · doi:10.1016/j.msec.2018.12.054 · Cited by 313
Self-citationAdaptive metamaterials by functionally graded 4D printing
Bodaghi, M., Damanpack, A. R., & Liao, W. H. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.08.069 · Cited by 302
Scaffolds for bone healing: Concepts, materials and evidence
Lichte, P., Pape, H. C., Pufe, T., Kobbe, P., & Fischer, H. (2011) · Injury · doi:10.1016/j.injury.2011.03.033 · Cited by 295
3D printing of shape memory polymer for functional part fabrication
Yang, Y., Chen, Y., Wei, Y., & Li, Y. (2016) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-015-7843-2 · Cited by 294
Water-induced shape memory effect of graphene oxide reinforced polyvinyl alcohol nanocomposites
Qi, X., Yao, X., Deng, S., Zhou, T., & Fu, Q. (2014) · J. Mater. Chem. A · doi:10.1039/c3ta14340f · Cited by 293
Shape Memory Effect Exhibited by Smectic-C Liquid Crystalline Elastomers
Rousseau, I. A., & Mather, P. T. (2003) · Journal of the American Chemical Society · doi:10.1021/ja039001s · Cited by 290
Shape‐Memory Effects in Polymer Networks Containing Reversibly Associating Side‐Groups
Li, J., Viveros, J. A., Wrue, M. H., & Anthamatten, M. (2007) · Advanced Materials · doi:10.1002/adma.200602260 · Cited by 283
Zhao, W., Zhang, F., Leng, J., & Liu, Y. (2019) · Composites Science and Technology · doi:10.1016/j.compscitech.2019.107866 · Cited by 279
Self-citation4D‐Printed Biodegradable and Remotely Controllable Shape Memory Occlusion Devices
Lin, C., Lv, J., Li, Y., Zhang, F., Li, J., Liu, Y., Liu, L., & Leng, J. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201906569 · Cited by 272
Self-citationBao, M., Lou, X., Zhou, Q., Dong, W., Yuan, H., & Zhang, Y. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am405101k · Cited by 267
Magnetic programming of 4D printed shape memory composite structures
Zhang, F., Wang, L., Zheng, Z., Liu, Y., & Leng, J. (2019) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2019.105571 · Cited by 267
Self-citationEvaluation of a degradable shape-memory polymer network as matrix for controlled drug release
Wischke, C., Neffe, A. T., Steuer, S., & Lendlein, A. (2009) · Journal of Controlled Release · doi:10.1016/j.jconrel.2009.05.027 · Cited by 248
Bone substitutes in the Netherlands – A systematic literature review
Van der Stok, J., Van Lieshout, E. M. M., El-Massoudi, Y., Van Kralingen, G. H., & Patka, P. (2011) · Acta Biomaterialia · doi:10.1016/j.actbio.2010.07.035 · Cited by 246
Chen, L., Deng, C., Li, J., Yao, Q., Chang, J., Wang, L., & Wu, C. (2019) · Biomaterials · doi:10.1016/j.biomaterials.2018.04.005 · Cited by 245
Vidal, L., Kampleitner, C., Brennan, M. Á., Hoornaert, A., & Layrolle, P. (2020) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2020.00061 · Cited by 239
Biodegradable, Amorphous Copolyester‐Urethane Networks Having Shape‐Memory Properties
Alteheld, A., Feng, Y., Kelch, S., & Lendlein, A. (2005) · Angewandte Chemie International Edition · doi:10.1002/anie.200461360 · Cited by 237
Cui, H., Liu, C., Esworthy, T., Huang, Y., Yu, Z.-X., Zhou, X., San, H., Lee, S.-J., Hann, S. Y., Boehm, M., et al. (2020) · Science Advances · doi:10.1126/sciadv.abb5067 · Cited by 230
Shape‐memory polymer networks from oligo(ϵ‐caprolactone)dimethacrylates
Lendlein, A., Schmidt, A. M., Schroeter, M., & Langer, R. (2005) · Journal of Polymer Science Part A: Polymer Chemistry · doi:10.1002/pola.20598 · Cited by 220
4D Printing: History and Recent Progress
Wu, J.-J., Huang, L.-M., Zhao, Q., & Xie, T. (2018) · Chinese Journal of Polymer Science · doi:10.1007/s10118-018-2089-8 · Cited by 219
Zhang, D., George, O. J., Petersen, K. M., Jimenez-Vergara, A. C., Hahn, M. S., & Grunlan, M. A. (2014) · Acta Biomaterialia · doi:10.1016/j.actbio.2014.07.020 · Cited by 217
Polymers with Dual Light-Triggered Functions of Shape Memory and Healing Using Gold Nanoparticles
Zhang, H., & Zhao, Y. (2013) · ACS Applied Materials & Interfaces · doi:10.1021/am404087q · Cited by 217
Leist, S. K., & Zhou, J. (2016) · Virtual and Physical Prototyping · doi:10.1080/17452759.2016.1198630 · Cited by 216
Calcium phosphate‐based composites as injectable bone substitute materials
Low, K. L., Tan, S. H., Zein, S. H. S., Roether, J. A., Mouriño, V., & Boccaccini, A. R. (2010) · Journal of Biomedical Materials Research Part B: Applied Biomaterials · doi:10.1002/jbm.b.31619 · Cited by 212
Rapidly switchable water-sensitive shape-memory cellulose/elastomer nano-composites
Zhu, Y., Hu, J., Luo, H., Young, R. J., Deng, L., Zhang, S., Fan, Y., & Ye, G. (2012) · Soft Matter · doi:10.1039/c2sm07035a · Cited by 208
Biodegradable Shape Memory Polymers in Medicine
Peterson, G. I., Dobrynin, A. V., & Becker, M. L. (2017) · Advanced Healthcare Materials · doi:10.1002/adhm.201700694 · Cited by 206
Emerging 4D Printing Strategies for Next‐Generation Tissue Regeneration and Medical Devices
Wang, Y., Cui, H., Esworthy, T., Mei, D., Wang, Y., & Zhang, L. G. (2022) · Advanced Materials · doi:10.1002/adma.202109198 · Cited by 205
4D Printing: dawn of an emerging technology cycle
Pei, E. (2014) · Assembly Automation · doi:10.1108/aa-07-2014-062 · Cited by 199
Yang, T., Hu, Y., Wang, C., & Binks, B. P. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b05012 · Cited by 198
Robust Vacuum‐/Air‐Dried Graphene Aerogels and Fast Recoverable Shape‐Memory Hybrid Foams
Li, C., Qiu, L., Zhang, B., Li, D., & Liu, C. (2016) · Advanced Materials · doi:10.1002/adma.201504317 · Cited by 195
Programmed Shape‐Morphing Scaffolds Enabling Facile 3D Endothelialization
Zhao, Q., Wang, J., Cui, H., Chen, H., Wang, Y., & Du, X. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201801027 · Cited by 195
Jiang, Z., Xiao, Y., Tong, X., & Zhao, Y. (2019) · Angewandte Chemie International Edition · doi:10.1002/anie.201900470 · Cited by 190
Low density biodegradable shape memory polyurethane foams for embolic biomedical applications
Singhal, P., Small, W., Cosgriff-Hernandez, E., Maitland, D. J., & Wilson, T. S. (2014) · Acta Biomaterialia · doi:10.1016/j.actbio.2013.09.027 · Cited by 189
Miao, S., Zhu, W., Castro, N. J., Leng, J., & Zhang, L. G. (2016) · Tissue Engineering Part C: Methods · doi:10.1089/ten.tec.2015.0542 · Cited by 187
Self-citationTriple shape memory polymers by 4D printing
Bodaghi, M., Damanpack, A. R., & Liao, W. H. (2018) · Smart Materials and Structures · doi:10.1088/1361-665x/aabc2a · Cited by 187
Review of 4D printing materials and their properties
Shin, D.-G., Kim, T.-H., & Kim, D.-E. (2017) · International Journal of Precision Engineering and Manufacturing-Green Technology · doi:10.1007/s40684-017-0040-z · Cited by 183
Wang, Y., Cui, H., Wang, Y., Xu, C., Esworthy, T. J., Hann, S. Y., Boehm, M., Shen, Y.-L., Mei, D., & Zhang, L. G. (2021) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.0c17610 · Cited by 180
Ajili, S. H., Ebrahimi, N. G., & Soleimani, M. (2009) · Acta Biomaterialia · doi:10.1016/j.actbio.2008.12.014 · Cited by 179
Liu, X., Zhao, K., Gong, T., Song, J., Bao, C., Luo, E., Weng, J., & Zhou, S. (2014) · Biomacromolecules · doi:10.1021/bm401911p · Cited by 178
Porous bone tissue scaffold concept based on shape memory PLA/Fe3O4
Zhao, W., Huang, Z., Liu, L., Wang, W., Leng, J., & Liu, Y. (2021) · Composites Science and Technology · doi:10.1016/j.compscitech.2020.108563 · Cited by 178
Self-citationHendrikson, W. J., Rouwkema, J., Clementi, F., van Blitterswijk, C. A., Farè, S., & Moroni, L. (2017) · Biofabrication · doi:10.1088/1758-5090/aa8114 · Cited by 177
Lin, C., Zhang, L., Liu, Y., Liu, L., & Leng, J. (2020) · Science China Technological Sciences · doi:10.1007/s11431-019-1468-2 · Cited by 177
Self-citationde Boer, H. H. (1988) · Clinical Orthopaedics and Related Research · doi:10.1097/00003086-198801000-00037 · Cited by 176
Luo, Y., Li, Y., Qin, X., & Wa, Q. (2018) · Materials & Design · doi:10.1016/j.matdes.2018.03.002 · Cited by 171
A new insight into the dissociating effect of strontium on bone resorption and formation
Braux, J., Velard, F., Guillaume, C., Bouthors, S., Jallot, E., Nedelec, J.-M., Laurent-Maquin, D., & Laquerrière, P. (2011) · Acta Biomaterialia · doi:10.1016/j.actbio.2011.02.013 · Cited by 164
4D printing – fused deposition modeling printing with thermal-responsive shape memory polymers
Ly, S. T., & Kim, J. Y. (2017) · International Journal of Precision Engineering and Manufacturing-Green Technology · doi:10.1007/s40684-017-0032-z · Cited by 163
Biodegradable Water-Based Polyurethane Shape Memory Elastomers for Bone Tissue Engineering
Wang, Y.-J., Jeng, U.-S., & Hsu, S.-H. (2018) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.8b00091 · Cited by 163
4D printed shape memory polymers and their structures for biomedical applications
Li, Y., Zhang, F., Liu, Y., & Leng, J. (2020) · Science China Technological Sciences · doi:10.1007/s11431-019-1494-0 · Cited by 163
Self-citationWu, L., Jin, C., & Sun, X. (2011) · Biomacromolecules · doi:10.1021/bm1012162 · Cited by 161
Harnessing 4D Printing Bioscaffolds for Advanced Orthopedics
Chen, X., Han, S., Wu, W., Wu, Z., Yuan, Y., Wu, J., & Liu, C. (2022) · Small · doi:10.1002/smll.202106824 · Cited by 160
Liquid metal biomaterials: a newly emerging area to tackle modern biomedical challenges
Yi, L., & Liu, J. (2017) · International Materials Reviews · doi:10.1080/09506608.2016.1271090 · Cited by 156
The scaffold microenvironment for stem cell based bone tissue engineering
Hao, Z., Song, Z., Huang, J., Huang, K., Panetta, A., Gu, Z., & Wu, J. (2017) · Biomaterials Science · doi:10.1039/c7bm00146k · Cited by 155
NIR-Triggered Rapid Shape Memory PAM–GO–Gelatin Hydrogels with High Mechanical Strength
Huang, J., Zhao, L., Wang, T., Sun, W., & Tong, Z. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b00867 · Cited by 153
Tissue-engineered trachea from a 3D-printed scaffold enhances whole-segment tracheal repair
Gao, M., Zhang, H., Wei, D., Bai, J., Gao, B., Xia, D., Feng, B., Chen, M., He, X., Yin, M., et al. (2017) · Scientific Reports · doi:10.1038/s41598-017-05518-3 · Cited by 153
4D printing of reconfigurable metamaterials and devices
van Manen, T., Janbaz, S., Jansen, K. M. B., & Zadpoor, A. A. (2021) · Communications Materials · doi:10.1038/s43246-021-00165-8 · Cited by 151
Teixeira, B. N., Aprile, P., Mendonça, R. H., Kelly, D. J., & Thiré, R. M. D. S. M. (2019) · Journal of Biomedical Materials Research Part B: Applied Biomaterials · doi:10.1002/jbm.b.34093 · Cited by 150
Shape memory effect in 3D-printed scaffolds for self-fitting implants
Senatov, F. S., Zadorozhnyy, M. Y., Niaza, K. V., Medvedev, V. V., Kaloshkin, S. D., Anisimova, N. Y., Kiselevskiy, M., & Yang, K.-C. (2017) · European Polymer Journal · doi:10.1016/j.eurpolymj.2017.06.011 · Cited by 149
Remotely actuated shape memory effect of electrospun composite nanofibers
Gong, T., Li, W., Chen, H., Wang, L., Shao, S., & Zhou, S. (2012) · Acta Biomaterialia · doi:10.1016/j.actbio.2011.12.006 · Cited by 147
Yu, Y.-J., Hearon, K., Wilson, T. S., & Maitland, D. J. (2011) · Smart Materials and Structures · doi:10.1088/0964-1726/20/8/085010 · Cited by 147
Intelligent materials: a review of applications in 4D printing
Li, X., Shang, J., & Wang, Z. (2017) · Assembly Automation · doi:10.1108/aa-11-2015-093 · Cited by 142
Kai, D., Prabhakaran, M. P., Chan, B. Q. Y., Liow, S. S., Ramakrishna, S., Xu, F., & Loh, X. J. (2016) · Biomedical Materials · doi:10.1088/1748-6041/11/1/015007 · Cited by 141
Lee, H., Yang, G. H., Kim, M., Lee, J., Huh, J., & Kim, G. (2017) · Materials Science and Engineering C · doi:10.1016/j.msec.2017.11.013 · Cited by 140
Development of tracheal surgery: a historical review. Part 1: techniques of tracheal surgery
Grillo, H. C. (2003) · The Annals of Thoracic Surgery · doi:10.1016/s0003-4975(02)04108-5 · Cited by 139
Salvekar, A. V., Huang, W., Xiao, R., Wong, Y. S., Venkatraman, S. S., Tay, K. H., & Shen, Z. (2017) · Accounts of Chemical Research · doi:10.1021/acs.accounts.6b00539 · Cited by 139
4D printing in biomedical applications: emerging trends and technologies
Agarwal, T., Hann, S.-Y., Chiesa, I., Cui, H., Celikkin, N., Micalizzi, S., Barbetta, A., Costantini, M., Esworthy, T. J., Zhang, L. G., et al. (2021) · Journal of Materials Chemistry B · doi:10.1039/d1tb01335a · Cited by 136
Xie, H., He, M.-J., Deng, X.-Y., Du, L., Fan, C.-J., Yang, K.-K., & Wang, Y.-Z. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b00704 · Cited by 134
Visible Light-Induced Plasticity of Shape Memory Polymers
Ji, S., Fan, F., Sun, C., Yu, Y., & Xu, H. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b11188 · Cited by 134
Bioactive glass and hybrid scaffolds prepared by sol–gel method for bone tissue engineering
Pereira, M. M., Jones, J. R., & Hench, L. L. (2004) · Advances in Applied Ceramics Structural Functional and Bioceramics · doi:10.1179/174367605225011034 · Cited by 133
Wang, C., Yue, H., Liu, J., Zhao, Q., He, Z., Li, K., Lu, B., Huang, W., Wei, Y., Tang, Y., et al. (2020) · Biofabrication · doi:10.1088/1758-5090/abab5b · Cited by 132
Mimicking the nanostructure of bone matrix to regenerate bone
Kane, R. J., & Ma, P. X. (2013) · Materials Today · doi:10.1016/j.mattod.2013.11.001 · Cited by 131
4D Printing based piezoelectric composite for medical applications
Grinberg, D., Siddique, S., Le, M., Liang, R., Capsal, J., & Cottinet, P. (2018) · Journal of Polymer Science Part B Polymer Physics · doi:10.1002/polb.24763 · Cited by 131
Lin, C. T., Liu, L., Liu, Y., & Leng, J. (2021) · Composite Structures · doi:10.1016/j.compstruct.2021.114729 · Cited by 127
Self-citation4D Printing: Materials, Technologies, and Future Applications in the Biomedical Field
Bajpai, A., Baigent, A., Raghav, S., Brádaigh, C. M. Ó., Koutsos, V., & Radacsi, N. (2020) · Sustainability · doi:10.3390/su122410628 · Cited by 126
4D polycarbonates via stereolithography as scaffolds for soft tissue repair
Weems, A. C., Arno, M. C., Wei, Y., Huckstepp, R. T. R., & Dove, A. P. (2021) · Nature Communications · doi:10.1038/s41467-021-23956-6 · Cited by 126
Baker, R. M., Tseng, L.-F., Iannolo, M. T., Oest, M. E., & Henderson, J. H. (2015) · Biomaterials · doi:10.1016/j.biomaterials.2015.10.064 · Cited by 125
Zhang, Y., Li, C., Zhang, W., Deng, J., Nie, Y., Du, X., Qin, L., & Lai, Y. (2021) · Bioactive Materials · doi:10.1016/j.bioactmat.2021.12.032 · Cited by 125
Self-expandable Metallic Airway Stent Insertion Employing Flexible Bronchoscopy
Dasgupta, A., Dolmatch, B. L., Abi-Saleh, W. J., et al. (1998) · CHEST Journal · doi:10.1378/chest.114.1.106 · Cited by 124
Design of 4D printed shape-changing tracheal stent and remote controlling actuation
Zhang, F., Wen, N., Wang, L., Bai, Y., & Leng, J. (2021) · International Journal of Smart and Nano Materials · doi:10.1080/19475411.2021.1974972 · Cited by 123
Self-citationSiddique, A. R. M., Rabari, R., Mahmud, S., & Heyst, B. V. (2016) · Energy · doi:10.1016/j.energy.2016.09.087 · Cited by 122
He, F., Li, D.-W., He, J., Liu, Y., Ahmad, F., Liu, Y., Deng, X., Ye, Y., & Yin, D. (2017) · Materials Science and Engineering C · doi:10.1016/j.msec.2017.12.016 · Cited by 119
Self-citationXiao, R., & Huang, W. (2020) · Macromolecular Bioscience · doi:10.1002/mabi.202000108 · Cited by 119
Shape memory materials and 4D printing in pharmaceutics
Melocchi, A., Uboldi, M., Cerea, M., Foppoli, A., Maroni, A., Moutaharrik, S., Palugan, L., Zema, L., & Gazzaniga, A. (2021) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2021.03.013 · Cited by 118
A bifurcated silicone rubber stent for relief of tracheobronchial obstruction
Westaby, S., Jackson, J. W., & Pearson, F. G. (1982) · Journal of Thoracic and Cardiovascular Surgery · doi:10.1016/s0022-5223(19)37277-0 · Cited by 117
Cabrera, M. S., Sanders, B., Goor, O. J. G. M., Driessen-Mol, A., Oomens, C. W. J., & Baaijens, F. P. T. (2017) · 3D Printing and Additive Manufacturing · doi:10.1089/3dp.2016.0052 · Cited by 117
4D Printing of Bioinspired Absorbable Left Atrial Appendage Occluders: A Proof-of-Concept Study
Lin, C. T., Liu, L., Liu, Y., & Leng, J. (2021) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.0c17192 · Cited by 117
Self-citationSirolimus-Eluting Stent Implantation in ST-Elevation Acute Myocardial Infarction
Saia, F., Lemos, P. A., Lee, C., et al. (2003) · Circulation · doi:10.1161/01.cir.0000096053.87580.cd · Cited by 115
Xuan, H., Hu, H., Geng, C., Song, J., Shen, Y., Lei, D., Guan, Q., Zhao, S., & You, Z. (2020) · Acta Biomaterialia · doi:10.1016/j.actbio.2020.01.015 · Cited by 113
Degradable shape-memory polymer networks from oligo[(l-lactide)-ran-glycolide]dimethacrylates
Choi, N.-Y., & Lendlein, A. (2007) · Soft Matter · doi:10.1039/b702515g · Cited by 110
4D printing: processability and measurement of recovery force in shape memory polymers
Monzón, M., Paz, R., Pei, E., Ortega, Z., Suárez, L., Ortega, Z., Alemán‐Domínguez, M. E., Plucinski, T., & Clow, N. (2016) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-016-9233-9 · Cited by 110
Smart scaffolds: shape memory polymers (SMPs) in tissue engineering
Pfau, M. R., & Grunlan, M. A. (2021) · Journal of Materials Chemistry B · doi:10.1039/d1tb00607j · Cited by 110
Kirigami-inspired stents for sustained local delivery of therapeutics
Babaee, S., Shi, Y., Abbasalizadeh, S., Tamang, S. M., Hess, K., Collins, J. E., Ishida, K., Lopes, A., Williams, M., Albaghdadi, M. S., et al. (2021) · Nature Materials · doi:10.1038/s41563-021-01031-1 · Cited by 110
Bai, Y., Zhang, J., & Chen, X. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b01425 · Cited by 107
Biomimetic micro/nano structures for biomedical applications
Xiang, T., Hou, J., Xie, H. Q., Liu, X., Gong, T., & Zhou, S. (2020) · Nano Today · doi:10.1016/j.nantod.2020.100980 · Cited by 106
Shin, H., Temenoff, J. S., & Mikos, A. G. (2003) · Biomacromolecules · doi:10.1021/bm020121m · Cited by 105
Kim, H., Yang, G. H., Choi, C. H., Cho, Y. S., & Kim, G. (2018) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2018.07.159 · Cited by 105
Advanced Material Strategies for Next-Generation Additive Manufacturing
Chang, J., He, J., Mao, M., Zhou, W., Lei, Q., Li, X., Li, D., Chua, C.-K., & Zhao, X. (2018) · Materials · doi:10.3390/ma11010166 · Cited by 104
Polylactide-based thermoplastic shape memory polymer nanocomposites
Yan, B., Gu, S., & Zhang, Y. (2012) · European Polymer Journal · doi:10.1016/j.eurpolymj.2012.09.026 · Cited by 103
A Survey of Surface Modification Techniques for Next-Generation Shape Memory Polymer Stent Devices
Govindarajan, T., & Shandas, R. (2014) · Polymers · doi:10.3390/polym6092309 · Cited by 103
4D Printing of Resorbable Complex Shape-Memory Poly(propylene fumarate) Star Scaffolds
Fer, G. L., & Becker, M. L. (2020) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.0c01444 · Cited by 103
Chen, B.-Q., Kankala, R., Chen, A.-Z., Yang, D.-Z., Cheng, X.-X., Jiang, N.-N., Zhu, K., & Wang, S.-B. (2017) · International Journal of Nanomedicine · doi:10.2147/ijn.s129526 · Cited by 98
3D Powder Printed Bioglass and β-Tricalcium Phosphate Bone Scaffolds
Seidenstuecker, M., Kerr, L., Bernstein, A., Mayr, H., Suedkamp, N., Gadow, R., Krieg, P., Hernandez Latorre, S., Thomann, R., Syrowatka, F., et al. (2017) · Materials · doi:10.3390/ma11010013 · Cited by 98
Wong, Y. S., Salvekar, A. V., Zhuang, K. D., Liu, H., Birch, W. R., Tay, K. H., Huang, W., & Venkatraman, S. S. (2016) · Biomaterials · doi:10.1016/j.biomaterials.2016.06.014 · Cited by 96
3D bioprinting scaffold using alginate/polyvinyl alcohol bioinks
Luo, Y., Luo, G., Gelinsky, M., Huang, P., & Ruan, C. (2016) · Materials Letters · doi:10.1016/j.matlet.2016.12.009 · Cited by 95
Wang, K., & Zhu, X. X. (2018) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.8b00671 · Cited by 95
Kim, B.-S., Yang, S.-S., & Kim, C. S. (2018) · Colloids and Surfaces B: Biointerfaces · doi:10.1016/j.colsurfb.2018.06.043 · Cited by 95
Lee, P., Küpeli̇, E., & Mehta, A. C. (2010) · Clinics in Chest Medicine · doi:10.1016/j.ccm.2009.08.002 · Cited by 94
4D Printing of Shape Memory Vascular Stent Based on β CD‐ g ‐Polycaprolactone
Zhou, Y., Zhou, D., Cao, P., Zhang, X., Wang, Q., Wang, T., Li, Z., He, W., Ju, J., & Zhang, Y. (2021) · Macromolecular Rapid Communications · doi:10.1002/marc.202100176 · Cited by 93
Song, X., Tetik, H., Jirakittsonthon, T., Parandoush, P., Yang, G., Lee, D., Ryu, S., Lei, S., Weiss, M. L., & Lin, D. (2019) · Advanced Engineering Materials · doi:10.1002/adem.201800678 · Cited by 91
Biocompatible Shape Memory Blend for Self-Expandable Stents with Potential Biomedical Applications
Zheng, Y., Li, Y., Hu, X. F., Shen, J., & Guo, S. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b04808 · Cited by 89
Touri, M., Moztarzadeh, F., Osman, N., Dehghan, M., & Mozafari, M. (2018) · Materials Science and Engineering C: Materials for Biological Applications · doi:10.1016/j.msec.2017.11.037 · Cited by 89
Self-fitting shape memory polymer foam inducing bone regeneration: A rabbit femoral defect study
Xie, R., Hu, J., Hoffmann, O., Zhang, Y., Ng, M. C. F., Qin, T., & Guo, X. (2018) · Biochimica et Biophysica Acta (BBA) - General Subjects · doi:10.1016/j.bbagen.2018.01.013 · Cited by 89
A flexible porous chiral auxetic tracheal stent with ciliated epithelium
Liu, J., Yao, X., Wang, Z., Ye, J., Luan, C., He, Y., Lin, H. M., & Fu, J. (2021) · Acta Biomaterialia · doi:10.1016/j.actbio.2021.01.044 · Cited by 88
von der Höh, N., Bormann, D., Lucas, A., Denkena, B., Hackenbroich, C., & Meyer‐Lindenberg, A. (2009) · Advanced Engineering Materials · doi:10.1002/adem.200800273 · Cited by 87
Ahmad, M., Luo, J., Xu, B., Purnawali, H., King, P. J., Chalker, P. R., Fu, Y., Huang, W., & Miraftab, M. (2011) · Macromolecular Chemistry and Physics · doi:10.1002/macp.201000540 · Cited by 87
Multi‐Dimensional Printing for Bone Tissue Engineering
Qu, M., Wang, C., Zhou, X., Libanori, A., Jiang, X., Xu, W., Zhu, S., Chen, Q., Sun, W., & Khademhosseini, A. (2021) · Advanced Healthcare Materials · doi:10.1002/adhm.202001986 · Cited by 87
Park, S. A., Lee, S. J., Seok, J. M., Lee, J. H., Kim, W. D., & Kwon, I. K. (2018) · Journal of Bionic Engineering · doi:10.1007/s42235-018-0034-8 · Cited by 86
A bioinspired 4D printed hydrogel capsule for smart controlled drug release
Zu, S., Wang, Z., Zhang, S., Guo, Y., Chen, C., Zhang, Q., Wang, Z., Liu, T., Liu, Q., & Zhang, Z. (2022) · Materials Today Chemistry · doi:10.1016/j.mtchem.2022.100789 · Cited by 85
Ristovski, N., Bock, N., Liao, S., Powell, S. K., Ren, J., Kirby, G. T. S., Blackwood, K. A., & Woodruff, M. A. (2015) · Biointerphases · doi:10.1116/1.4914380 · Cited by 84
In vitro characterization of 3D printed scaffolds aimed at bone tissue regeneration
Boga, J. C., Miguel, S. P., de Melo‐Diogo, D., Mendonça, A., Louro, R. O., & Correia, I. J. (2018) · Colloids and Surfaces B Biointerfaces · doi:10.1016/j.colsurfb.2018.02.038 · Cited by 84
Yuan, F., Wang, H., Guan, J., Fu, J.-N., Yang, M., Zhang, J., Chen, Y., Wang, X., & Yu, J. (2021) · Pharmaceutics · doi:10.3390/pharmaceutics13091487 · Cited by 83
Origami derived self-assembly stents fabricated via 4D printing
Zhao, W. D., Li, N., Liu, L., Leng, J., & Liu, Y. (2022) · Composite Structures · doi:10.1016/j.compstruct.2022.115669 · Cited by 81
Self-citationChoi, N. ‐., Kelch, S., & Lendlein, A. (2006) · Advanced Engineering Materials · doi:10.1002/adem.200600020 · Cited by 80
Advanced 4D-bioprinting technologies for brain tissue modeling and study
Esworthy, T. J., Miao, S., Lee, S., Zhou, X., Cui, H., Zuo, Y. Y., & Zhang, L. G. (2019) · International Journal of Smart and Nano Materials · doi:10.1080/19475411.2019.1631899 · Cited by 80
Chen, L., Zhang, Y., Ye, H., Duan, G., Duan, H., Ge, Q., & Wang, Z. (2021) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.1c02656 · Cited by 80
Chen, M., Chang, Y., Liu, C.-T., Lai, W., Peng, S., Hung, Y.-W., Tsai, H.-W., & Sung, H. (2008) · Biomaterials · doi:10.1016/j.biomaterials.2008.09.006 · Cited by 78
Selectively actuated multi-shape memory effect of a polymer multicomposite
Li, W., Liu, Y., & Leng, J. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta08513f · Cited by 78
Self-citationSelf‐Unfolding Flexible Microelectrode Arrays Based on Shape Memory Polymers
Wang, J., Zhao, Q., Wang, Y., Zeng, Q., Wu, T., & Du, X. (2019) · Advanced Materials Technologies · doi:10.1002/admt.201900566 · Cited by 77
Bone grafting: historical and conceptual review, starting with an old manuscript by Vittorio Putti
Donati, D. M., Zolezzi, C., Tomba, P., et al. (2007) · Acta Orthopaedica · doi:10.1080/17453670610013376 · Cited by 76
Triple-Layer Vascular Grafts Fabricated by Combined E-Jet 3D Printing and Electrospinning
Huang, R., Gao, X., Wang, J., Chen, H., Tong, C., Tan, Y., & Tan, Z. (2018) · Annals of Biomedical Engineering · doi:10.1007/s10439-018-2065-z · Cited by 76
The local and global geometry of trabecular bone
Callens, S. J. P., Betts, D. C. T. N., Müller, R., & ZADPOOR, A. A. (2021) · Acta Biomaterialia · doi:10.1016/j.actbio.2021.06.013 · Cited by 76
Saito, Y., & Imamura, H. (2005) · Surgery Today · doi:10.1007/s00595-004-2942-y · Cited by 76
Zhang, X., Zhu, C., Xu, B., Qin, L., Wei, J., & Yu, Y. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b17271 · Cited by 74
Gong, T., Zhao, K., Liu, X., Lu, L., Liu, D., & Zhou, S. (2016) · Small · doi:10.1002/smll.201601503 · Cited by 73
Guillaume, O., Daly, A., Lennon, K., et al. (2014) · Acta Biomaterialia · doi:10.1016/j.actbio.2013.12.037 · Cited by 72
Jiao, C., Chen, Y., Liu, T., Peng, X., Zhao, Y., Zhang, J., Wu, Y., & Wang, H. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b11391 · Cited by 72
Li, W., Liu, Y., & Leng, J. (2014) · RSC Adv. · doi:10.1039/c4ra10716k · Cited by 71
Self-citationFang, Z., Kuang, Y., Zhou, P., Ming, S., Zhu, P., Liu, Y., Ning, H., & Chen, G. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b14868 · Cited by 71
Self-citationYang, G., Liu, X., Tok, A. I. Y., & Lipik, V. (2017) · Polymer Chemistry · doi:10.1039/c7py00786h · Cited by 71
Thermal and water dual-responsive shape memory poly(vinyl alcohol)/Al 2 O 3 nanocomposite
Bai, Q., Zhang, G., Xu, B., Feng, X., Jiang, H., & Li, H. (2015) · RSC Advances · doi:10.1039/c5ra17103b · Cited by 70
Research works printed but not linked: 6
- Tibbits S., 2014, Archit. Des., 84, 116
- Choi J., 2015, Addit. Manuf., 2, 159
- Saficy N., 2017, Macromol. Mater. Eng., 302, 170
- Zhang Z. X., 2016, J. Phys. Chem., 120
- Yao M. Z., 2016, Zhejiang Da Xue Xue Bao Yi Xue Ban, 45, 161
- Chen Y., 2019, Beijing Da Xue Xue Bao Yi Xue Ban, 51, 907
Cited by
4D Printing in Biomedical Engineering: Advancements, Challenges, and Future Directions
Ramezani, M., & Mohd Ripin, Z. (2023) · Journal of Functional Biomaterials · doi:10.3390/jfb14070347 · Cited by 241
“Biocompatibility is a critical consideration in biomedical engineering, as the materials used must be non-toxic and non-immunogenic to ensure the safety of patients [88,89].”
BackgroundLiu, B., Li, H., Meng, F., Xu, Z., Hao, L., Yao, Y., Zhu, H., Wang, C., Wu, J., Bian, S., et al. (2024) · Nature Communications · doi:10.1038/s41467-024-45938-0 · Cited by 195
“The fourth dimension of 4D printing enables the printed scaffolds to undergo programmable deformations in response to speci fi c stimuli, offering alternative possibilities for minimally invasive surgery 10,11 .”
3D printing of magneto-active smart materials for advanced actuators and soft robotics applications
Khalid, M. Y., Arif, Z. U., Tariq, A., Hossain, M., Ahmed Khan, K., & Umer, R. (2024) · European Polymer Journal · doi:10.1016/j.eurpolymj.2023.112718 · Cited by 190
Recent Advances in 4D Printing of Advanced Materials and Structures for Functional Applications
Wan, X., Xiao, Z., Tian, Y., Chen, M., Liu, F., Wang, D., Liu, Y., Bartolo, P. J. D. S., Yan, C., Shi, Y., et al. (2024) · Advanced Materials · doi:10.1002/adma.202312263 · Cited by 188
Self-citationDing, A., Tang, F., & Alsberg, E. (2025) · Chemical Reviews · doi:10.1021/acs.chemrev.4c00070 · Cited by 165
Metadata
- Authors
- Zhao, W., Yue, C., Liu, L., Liu, Y., & Leng, J.
- Affiliations
- Harbin Institute of Technology (CN)
- Corresponding author
- Liu, Yanju
- Leng, Jinsong
- Venue
- Advanced Healthcare Materials
- Publisher
- Wiley
- Published
- 2022-12-25
- Volume
- 12
- Issue
- 16
- Pages
- e2201975-e2201975
- ISSN
- 2192-2640 (ISSN-L)
- 2192-2659
- OpenAlex
- W4311776557
- Cited by
- 183
- References
- 290
- Citations by year
- 2026: 46 · 2025: 61 · 2024: 59 · 2023: 17
- FWCI
- 2.53
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Advanced Healthcare Materials (publishedVersion)
- PubMed (publishedVersion)
- Funders
- National Natural Science Foundation of China (12072094)
- Topics
- Physical Sciences › Engineering › Mechanical Engineering › Advanced Materials and Mechanics
- Physical Sciences › Materials Science › Polymers and Plastics › Polymer composites and self-healing
- Physical Sciences › Materials Science › Biomaterials › Hydrogels: synthesis, properties, applications
- Keywords
- shape memory polymers, 4D printing, smart materials, biomedical devices, bone scaffolds, controlled drug release, biocompatibility, biodegradability, personalized medical devices, minimally invasive implantation
- MeSH terms
- Smart Materials, Bone and Bones, Tissue Scaffolds, Drug Liberation, Printing, Three-Dimensional
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.