The DOI matches its Crossref record; 49 of the 49 references it cites were found in a registry or an index.
Reinforcement of hydrogels using three-dimensionally printed microfibres
Open accessAbstract
Despite intensive research, hydrogels currently available for tissue repair in the musculoskeletal system are unable to meet the mechanical, as well as the biological, requirements for successful outcomes. Here we reinforce soft hydrogels with highly organized, high-porosity microfibre networks that are 3D-printed with a technique termed as melt electrospinning writing. We show that the stiffness of the gel/scaffold composites increases synergistically (up to 54-fold), compared with hydrogels or microfibre scaffolds alone. Modelling affirms that reinforcement with defined microscale structures is applicable to numerous hydrogels. The stiffness and elasticity of the composites approach that of articular cartilage tissue. Human chondrocytes embedded in the composites are viable, retain their round morphology and are responsive to an in vitro physiological loading regime in terms of gene expression and matrix production. The current approach of reinforcing hydrogels with 3D-printed microfibres offers a fundament for producing tissue constructs with biological and mechanical compatibility. Hydrogels are commonly used materials for tissue engineering, but they can lack the structural properties required for load-bearing and mechanical applications. Here, the authors prepare a polycaprolactone scaffold using melt-electrospinning to reinforce a gelatin methacrylamide hydrogel.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Tissue Cells Feel and Respond to the Stiffness of Their Substrate
Discher, D. E., Janmey, P., & Wang, Y.-L. (2005) · Science · doi:10.1126/science.1116995 · Cited by 6,382
Scaffolds in tissue engineering bone and cartilage
Hutmacher, D. W. (2000) · Biomaterials · doi:10.1016/s0142-9612(00)00121-6 · Cited by 4,994
Self-citationThe return of a forgotten polymer—Polycaprolactone in the 21st century
Woodruff, M. A., & Hutmacher, D. W. (2010) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2010.04.002 · Cited by 4,033
Self-citationDesigning Cell-Compatible Hydrogels for Biomedical Applications
Seliktar, D. (2012) · Science · doi:10.1126/science.1214804 · Cited by 1,923
Printing three-dimensional tissue analogues with decellularized extracellular matrix bioink
Pati, F., Jang, J., Ha, D.-H., Won Kim, S., Rhie, J.-W., Shim, J.-H., Kim, D.-H., & Cho, D.-W. (2014) · Nature Communications · doi:10.1038/ncomms4935 · Cited by 1,904
25th Anniversary Article: Engineering Hydrogels for Biofabrication
Malda, J., Visser, J., Melchels, F. P., Jüngst, T., Hennink, W. E., Dhert, W. J. A., Groll, J., & Hutmacher, D. W. (2013) · Advanced Materials · doi:10.1002/adma.201302042 · Cited by 1,901
Self-citationAbbott, A. (2003) · Nature · doi:10.1038/424870a · Cited by 1,234
Mechanical properties of hydrogels and their experimental determination
Anseth, K. S., Bowman, C. N., & Brannon-Peppas, L. (1996) · Biomaterials · doi:10.1016/0142-9612(96)87644-7 · Cited by 1,156
A theory of coupled diffusion and large deformation in polymeric gels
Hong, W., Zhao, X., Zhou, J., & Suo, Z. (2008) · Journal of the Mechanics and Physics of Solids · doi:10.1016/j.jmps.2007.11.010 · Cited by 1,067
Pham, Q. P., Sharma, U., & Mikos, A. G. (2006) · Biomacromolecules · doi:10.1021/bm060680j · Cited by 956
Cited by
Synthesis, properties, and biomedical applications of gelatin methacryloyl (GelMA) hydrogels
Yue, K., Trujillo-de Santiago, G., Alvarez, M. M., Tamayol, A., Annabi, N., & Khademhosseini, A. (2015) · Biomaterials · doi:10.1016/j.biomaterials.2015.08.045 · Cited by 3,146
“[103] Visser J, Melchels FPW, Jeon JE, van Bussel E M, Kimpton LS, Byrne HM, et al.”
BackgroundAdvances in engineering hydrogels
Zhang, Y. S., & Khademhosseini, A. (2017) · Science · doi:10.1126/science.aaf3627 · Cited by 2,908
3D printing with polymers: Challenges among expanding options and opportunities
Stansbury, J. W., & Idacavage, M. J. (2016) · Dental Materials · doi:10.1016/j.dental.2015.09.018 · Cited by 1,732
Printability and shape fidelity of bioinks in 3D bioprinting
Schwab, A., Levato, R., D’Este, M., Piluso, S., Eglin, D., & Malda, J. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00084 · Cited by 1,359
Self-citationPCL and PCL-based materials in biomedical applications
Malikmammadov, E., Tanir, T. E., Kiziltay, A., Hasirci, V., & Hasirci, N. (2018) · Journal of Biomaterials Science, Polymer Edition · doi:10.1080/09205063.2017.1394711 · Cited by 894
Gelatin-Methacryloyl Hydrogels: Towards Biofabrication-Based Tissue Repair
Klotz, B. J., Gawlitta, D., Rosenberg, A. J. W. P., Malda, J., & Melchels, F. P. W. (2016) · Trends in Biotechnology · doi:10.1016/j.tibtech.2016.01.002 · Cited by 846
Self-citationFunctional and Biomimetic Materials for Engineering of the Three-Dimensional Cell Microenvironment
Huang, G., Li, F., Zhao, X., Ma, Y., Li, Y., Lin, M., Jin, G., Lu, T. J., Genin, G. M., & Xu, F. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00094 · Cited by 825
Nanocomposite scaffolds for accelerating chronic wound healing by enhancing angiogenesis
Nosrati, H., Aramideh Khouy, R., Nosrati, A., Khodaei, M., Banitalebi-Dehkordi, M., Ashrafi-Dehkordi, K., Sanami, S., & Alizadeh, Z. (2021) · Journal of Nanobiotechnology · doi:10.1186/s12951-020-00755-7 · Cited by 720
Materials and Structures toward Soft Electronics
Wang, C., Wang, C., Huang, Z., & Xu, S. (2018) · Advanced Materials · doi:10.1002/adma.201801368 · Cited by 662
Biofabrication of bone tissue: approaches, challenges and translation for bone regeneration
Tang, D., Tare, R. S., Yang, L.-Y., Williams, D. F., Ou, K.-L., & Oreffo, R. O. C. (2016) · Biomaterials · doi:10.1016/j.biomaterials.2016.01.024 · Cited by 613
Hydrogel Bioink Reinforcement for Additive Manufacturing: A Focused Review of Emerging Strategies
Chimene, D., Kaunas, R., & Gaharwar, A. K. (2020) · Advanced Materials · doi:10.1002/adma.201902026 · Cited by 600
Bioinks and bioprinting technologies to make heterogeneous and biomimetic tissue constructs
Ashammakhi, N., Ahadian, S., Xu, C., Montazerian, H., Ko, H., Nasiri, R., Barros, N., & Khademhosseini, A. (2019) · Materials Today Bio · doi:10.1016/j.mtbio.2019.100008 · Cited by 549
Unagolla, J. M., & Jayasuriya, A. C. (2020) · Applied Materials Today · doi:10.1016/j.apmt.2019.100479 · Cited by 544
3D printing of highly stretchable hydrogel with diverse UV curable polymers
Ge, Q., Chen, Z., Cheng, J., Zhang, B., Zhang, Y.-F., Li, H., He, X., Yuan, C., Liu, J., Magdassi, S., et al. (2021) · Science Advances · doi:10.1126/sciadv.aba4261 · Cited by 518
Extrusion Bioprinting of Shear‐Thinning Gelatin Methacryloyl Bioinks
Liu, W., Heinrich, M. A., Zhou, Y., Akpek, A., Hu, N., Liu, X., Guan, X., Zhong, Z., Jin, X., Khademhosseini, A., et al. (2017) · Advanced Healthcare Materials · doi:10.1002/adhm.201601451 · Cited by 503
From Shape to Function: The Next Step in Bioprinting
Levato, R., Jungst, T., Scheuring, R. G., Blunk, T., Groll, J., & Malda, J. (2020) · Advanced Materials · doi:10.1002/adma.201906423 · Cited by 476
Self-citationXu, L., Gao, S., Guo, Q., Wang, C., Qiao, Y., & Qiu, D. (2020) · Advanced Materials · doi:10.1002/adma.202004579 · Cited by 465
Superstrong, superstiff, and conductive alginate hydrogels
Ji, D., Park, J. M., Oh, M. S., Nguyen, T. L., Shin, H., Kim, J. S., Kim, D., Park, H. S., & Kim, J. (2022) · Nature Communications · doi:10.1038/s41467-022-30691-z · Cited by 462
Sun, M., Sun, X., Wang, Z., Guo, S., Yu, G., & Yang, H. (2018) · Polymers · doi:10.3390/polym10111290 · Cited by 449
3D Bioprinting: from Benches to Translational Applications
Heinrich, M. A., Liu, W., Jimenez, A., Yang, J., Akpek, A., Liu, X., Pi, Q., Mu, X., Hu, N., Schiffelers, R. M., et al. (2019) · Small · doi:10.1002/smll.201805510 · Cited by 437
A comparison of different bioinks for 3D bioprinting of fibrocartilage and hyaline cartilage
Daly, A. C., Critchley, S. E., Rencsok, E. M., & Kelly, D. J. (2016) · Biofabrication · doi:10.1088/1758-5090/8/4/045002 · Cited by 436
Recent Advances in Electrospun Nanofibers for Wound Healing
Chen, S., Liu, B., Carlson, M. A., Gombart, A. F., Reilly, D. A., & Xie, J. (2017) · Nanomedicine · doi:10.2217/nnm-2017-0017 · Cited by 409
Wu, H., Yang, G., Zhu, K., Liu, S., Guo, W., Jiang, Z., & Li, Z. (2021) · Advanced Science · doi:10.1002/advs.202001938 · Cited by 395
Xiao, S., Zhao, T., Wang, J., Wang, C., Du, J., Ying, L., Lin, J., Zhang, C., Hu, W., Wang, L., et al. (2019) · Stem Cell Reviews and Reports · doi:10.1007/s12015-019-09893-4 · Cited by 363
New Visible-Light Photoinitiating System for Improved Print Fidelity in Gelatin-Based Bioinks
Lim, K. S., Schon, B. S., Mekhileri, N. V., Brown, G. C. J., Chia, C. M., Prabakar, S., Hooper, G. J., & Woodfield, T. B. F. (2016) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.6b00149 · Cited by 362
Mouser, V. H. M., Melchels, F. P. W., Visser, J., Dhert, W. J. A., Gawlitta, D., & Malda, J. (2016) · Biofabrication · doi:10.1088/1758-5090/8/3/035003 · Cited by 359
Self-citationBai, R., Yang, J., & Suo, Z. (2019) · European Journal of Mechanics - A/Solids · doi:10.1016/j.euromechsol.2018.12.001 · Cited by 346
New Developments in Medical Applications of Hybrid Hydrogels Containing Natural Polymers
Vasile, C., Pamfil, D., Stoleru, E., & Baican, M. (2020) · Molecules · doi:10.3390/molecules25071539 · Cited by 337
3D Bioprinting for Cartilage and Osteochondral Tissue Engineering
Daly, A. C., Freeman, F. E., Gonzalez‐Fernandez, T., Critchley, S. E., Nulty, J., & Kelly, D. J. (2017) · Advanced Healthcare Materials · doi:10.1002/adhm.201700298 · Cited by 334
Levato, R., Webb, W. R., Otto, I. A., Mensinga, A., Zhang, Y., van Rijen, M., van Weeren, R., Khan, I. M., & Malda, J. (2017) · Acta Biomaterialia · doi:10.1016/j.actbio.2017.08.005 · Cited by 326
Self-citationThe Synergy of Scaffold-Based and Scaffold-Free Tissue Engineering Strategies
Ovsianikov, A., Khademhosseini, A., & Mironov, V. (2018) · Trends in Biotechnology · doi:10.1016/j.tibtech.2018.01.005 · Cited by 314
Fiber reinforced GelMA hydrogel to induce the regeneration of corneal stroma
Kong, B., Chen, Y., Liu, R., Liu, X., Liu, C., Shao, Z., Xiong, L., Liu, X., Sun, W., & Mi, S. (2020) · Nature Communications · doi:10.1038/s41467-020-14887-9 · Cited by 319
State-of-the-Art Review of 3D Bioprinting for Cardiovascular Tissue Engineering
Duan, B. (2017) · Annals of Biomedical Engineering · doi:10.1007/s10439-016-1607-5 · Cited by 314
Current Biomedical Applications of 3D Printing and Additive Manufacturing
Ahangar, P., Cooke, M. E., Weber, M. H., & Rosenzweig, D. H. (2019) · Applied Sciences · doi:10.3390/app9081713 · Cited by 309
Yi, B., Xu, Q., & Liu, W. (2022) · Bioactive Materials · doi:10.1016/j.bioactmat.2021.12.005 · Cited by 304
Biomedical applications of gelatin methacryloyl hydrogels
Piao, Y., You, H., Xu, T., Bei, H.-P., Piwko, I. Z., Kwan, Y. Y., & Zhao, X. (2021) · Engineered Regeneration · doi:10.1016/j.engreg.2021.03.002 · Cited by 295
Recent developments in 3D printable composite materials
Kalsoom, U., Nesterenko, P. N., & Paull, B. (2016) · RSC Advances · doi:10.1039/c6ra11334f · Cited by 294
Print Me An Organ! Why We Are Not There Yet
Ng, W. L., Chua, C. K., & Shen, Y.-F. (2019) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2019.101145 · Cited by 287
The rheology of direct and suspended extrusion bioprinting
Cooke, M. E., & Rosenzweig, D. H. (2021) · APL Bioengineering · doi:10.1063/5.0031475 · Cited by 284
3D Bioprinting of Developmentally Inspired Templates for Whole Bone Organ Engineering
Daly, A. C., Cunniffe, G. M., Sathy, B. N., Jeon, O., Alsberg, E., & Kelly, D. J. (2016) · Advanced Healthcare Materials · doi:10.1002/adhm.201600182 · Cited by 272
The Next Frontier in Melt Electrospinning: Taming the Jet
Robinson, T. M., Hutmacher, D. W., & Dalton, P. D. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201904664 · Cited by 267
Self-citationRepair of Damaged Articular Cartilage: Current Approaches and Future Directions
Medvedeva, E. V., Grebenik, E. A., Gornostaeva, S. N., Telpuhov, V. I., Lychagin, A. V., Timashev, P. S., & Chagin, A. S. (2018) · International Journal of Molecular Sciences · doi:10.3390/ijms19082366 · Cited by 266
Design, printing, and engineering of regenerative biomaterials for personalized bone healthcare
Jia, Z., Xu, X., Zhu, D., & Zheng, Y. (2023) · Progress in Materials Science · doi:10.1016/j.pmatsci.2023.101072 · Cited by 176
Polycaprolactone: Synthesis, Properties, and Applications
Guarino, V., Gentile, G., Sorrentino, L., & Ambrosio, L. (2017) · Encyclopedia of Polymer Science and Technology · doi:10.1002/0471440264.pst658 · Cited by 163
Schneeberger, K., Spee, B., Costa, P., Sachs, N., Clevers, H., & Malda, J. (2017) · Biofabrication · doi:10.1088/1758-5090/aa6121 · Cited by 100
Self-citationRamasamy, S., Davoodi, P., Vijayavenkataraman, S., Teoh, J. H., Thamizhchelvan, A. M., Robinson, K. S., Wu, B., Fuh, J. Y. H., DiColandrea, T., Zhao, H., et al. (2021) · Bioprinting · doi:10.1016/j.bprint.2020.e00123 · Cited by 96
Fang, Y., Sun, W., Zhang, T., & Xiong, Z. (2022) · Biomaterials · doi:10.1016/j.biomaterials.2021.121298 · Cited by 40
Fabrication and characterization of polycaprolactone-based green materials for drug delivery
Kurakula, M., Rao, G. S. N. K., & Yadav, K. S. (2021) · Applications of Advanced Green Materials · doi:10.1016/b978-0-12-820484-9.00016-7 · Cited by 34
Metadata
- Authors
- Visser, J., Melchels, F. P. W., Jeon, J. E., van Bussel, E. M., Kimpton, L. S., Byrne, H. M., Dhert, W. J. A., Dalton, P. D., Hutmacher, D. W., & Malda, J.
- Venue
- Nature Communications
- Published
- 2015-04-28
- Volume
- 6
- Issue
- 1
- Pages
- 6933-6933
- ISSN
- 2041-1723 (ISSN-L)
- OpenAlex
- W2091482871
- Cited by
- 718
- References
- 49
- FWCI
- 28.05
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.