The DOI matches its Crossref record; 131 of the 131 references it cites were found in a registry or an index.
Progress on the Critical Parameters for Lithium–Sulfur Batteries to be Practically Viable
Open accessAbstract
Lithium–sulfur batteries have great potential to satisfy the increasing demand of energy storage systems for portable devices, electric vehicles, and grid storage because of their extremely high specific capacity, cost‐effectiveness, and environmental friendliness. In spite of all these merits, the practical utilization of lithium–sulfur batteries is impeded by commonly known challenges, such as low sulfur utilization (<80%), short life (<200 cycles), fast capacity fade, and severe self‐discharge effect, which mainly result from the i) low conductivity of the active material, ii) serious polysulfide shuttling, iii) large volume changes, and iv) lithium–metal anode contamination/corrosion. Numerous approaches are reported to effectively mitigate these issues. Indeed, such approaches have shown enhanced lithium–sulfur battery performances. However, many reports overlook the critical parameters, including sulfur loading (<13 mg cm−2), sulfur content (<70 wt%), and electrolyte/sulfur ratio (>11 µL mg−1), that significantly affect the analyzed electrochemical characteristics, energy density, and practicality of lithium–sulfur batteries. This review highlights the trends and progress in making cells fulfilling these fabrication parameters and discuss the challenges of the amount of sulfur and electrolyte in fabricating cells with practically necessary parameters and with high electrochemical utilization and efficiency.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Li-O2 and Li-S batteries with high energy storage
Bruce, P. G., Freunberger, S. A., Hardwick, L. J., & Tarascon, J.-M. (2012) · Nature Materials · doi:10.1038/nmat3191 · Cited by 9,479
Li-ion battery materials: present and future
Nitta, N., Wu, F., Lee, J. T., & Yushin, G. (2015) · Materials Today · doi:10.1016/j.mattod.2014.10.040 · Cited by 7,389
Lithium Batteries and Cathode Materials
Whittingham, M. S. (2004) · Chemical Reviews · doi:10.1021/cr020731c · Cited by 6,267
Toward Safe Lithium Metal Anode in Rechargeable Batteries: A Review
Cheng, X.-B., Zhang, R., Zhao, C.-Z., & Zhang, Q. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00115 · Cited by 6,197
A highly ordered nanostructured carbon–sulphur cathode for lithium–sulphur batteries
Ji, X., Lee, K. T., & Nazar, L. F. (2009) · Nature Materials · doi:10.1038/nmat2460 · Cited by 5,988
Electrochemical Energy Storage for Green Grid
Yang, Z., Zhang, J., Kintner-Meyer, M. C. W., Lu, X., Choi, D., Lemmon, J. P., & Liu, J. (2011) · Chemical Reviews · doi:10.1021/cr100290v · Cited by 5,250
Lithium Batteries: Status, Prospects and Future
Scrosati, B., & Garche, J. (2010) · Journal of Power Sources · doi:10.1016/j.jpowsour.2009.11.048 · Cited by 5,153
Lithium metal anodes for rechargeable batteries
Xu, W., Wang, J., Ding, F., Chen, X., Nasybulin, E., Zhang, Y., & Zhang, J.-G. (2014) · Energy Environ. Sci. · doi:10.1039/c3ee40795k · Cited by 4,704
Rechargeable Lithium–Sulfur Batteries
Manthiram, A., Fu, Y., Chung, S.-H., Zu, C., & Su, Y.-S. (2014) · Chemical Reviews · doi:10.1021/cr500062v · Cited by 4,665
Self-citationRole of renewable energy sources in environmental protection: A review
Panwar, N. L., Kaushik, S. C., & Kothari, S. (2011) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2010.11.037 · Cited by 3,897
A review of renewable energy sources, sustainability issues and climate change mitigation
Owusu, P. A., & Asumadu-Sarkodie, S. (2016) · Cogent Engineering · doi:10.1080/23311916.2016.1167990 · Cited by 2,831
Lithium–Sulfur Batteries: Electrochemistry, Materials, and Prospects
Yin, Y., Xin, S., Guo, Y., & Wan, L. (2013) · Angewandte Chemie International Edition · doi:10.1002/anie.201304762 · Cited by 2,707
Challenges and Prospects of Lithium–Sulfur Batteries
Manthiram, A., Fu, Y., & Su, Y.-S. (2013) · Accounts of Chemical Research · doi:10.1021/ar300179v · Cited by 2,380
Self-citationAdvances in lithium–sulfur batteries based on multifunctional cathodes and electrolytes
Pang, Q., Liang, X., Kwok, C. Y., & Nazar, L. F. (2016) · Nature Energy · doi:10.1038/nenergy.2016.132 · Cited by 2,167
Polysulfide Shuttle Study in the Li/S Battery System
Mikhaylik, Y. V., & Akridge, J. R. (2004) · Journal of The Electrochemical Society · doi:10.1149/1.1806394 · Cited by 2,115
Ji, X., & Nazar, L. F. (2010) · Journal of Materials Chemistry · doi:10.1039/b925751a · Cited by 1,967
More Reliable Lithium‐Sulfur Batteries: Status, Solutions and Prospects
Fang, R., Zhao, S., Sun, Z., Wang, D., Cheng, H., & Li, F. (2017) · Advanced Materials · doi:10.1002/adma.201606823 · Cited by 1,785
An Outlook on Lithium Ion Battery Technology
Manthiram, A. (2017) · ACS Central Science · doi:10.1021/acscentsci.7b00288 · Cited by 1,771
Self-citationEnergy storage technologies and real life applications – A state of the art review
Aneke, M., & Wang, M. (2016) · Applied Energy · doi:10.1016/j.apenergy.2016.06.097 · Cited by 1,754
Review on High‐Loading and High‐Energy Lithium–Sulfur Batteries
Peng, H., Huang, J., Cheng, X., & Zhang, Q. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201700260 · Cited by 1,746
Lithium–Sulfur Batteries: Progress and Prospects
Manthiram, A., Chung, S., & Zu, C. (2015) · Advanced Materials · doi:10.1002/adma.201405115 · Cited by 1,620
Self-citationLiquid electrolyte lithium/sulfur battery: Fundamental chemistry, problems, and solutions
Zhang, S. S. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.12.102 · Cited by 1,592
A review of energy storage technologies for wind power applications
Díaz-González, F., Sumper, A., Gomis-Bellmunt, O., & Villafáfila-Robles, R. (2012) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2012.01.029 · Cited by 1,547
Lithium–sulphur batteries with a microporous carbon paper as a bifunctional interlayer
Su, Y.-S., & Manthiram, A. (2012) · Nature Communications · doi:10.1038/ncomms2163 · Cited by 1,458
Self-citationOn the Surface Chemical Aspects of Very High Energy Density, Rechargeable Li–Sulfur Batteries
Aurbach, D., Pollak, E., Elazari, R., Salitra, G., Kelley, C. S., & Affinito, J. (2009) · Journal of The Electrochemical Society · doi:10.1149/1.3148721 · Cited by 1,443
Powering Lithium–Sulfur Battery Performance by Propelling Polysulfide Redox at Sulfiphilic Hosts
Yuan, Z., Peng, H.-J., Hou, T.-Z., Huang, J.-Q., Chen, C.-M., Wang, D.-W., Cheng, X.-B., Wei, F., & Zhang, Q. (2016) · Nano Letters · doi:10.1021/acs.nanolett.5b04166 · Cited by 1,438
New Approaches for High Energy Density Lithium–Sulfur Battery Cathodes
Evers, S., & Nazar, L. F. (2013) · Accounts of Chemical Research · doi:10.1021/ar3001348 · Cited by 1,324
The future cost of electrical energy storage based on experience rates
Schmidt, O., Hawkes, A., Gambhir, A., & Staffell, I. (2017) · Nature Energy · doi:10.1038/nenergy.2017.110 · Cited by 1,134
Spherical Ordered Mesoporous Carbon Nanoparticles with High Porosity for Lithium–Sulfur Batteries
Schuster, J., He, G., Mandlmeier, B., Yim, T., Lee, K. T., Bein, T., & Nazar, L. F. (2012) · Angewandte Chemie International Edition · doi:10.1002/anie.201107817 · Cited by 1,114
Lithium sulfur batteries, a mechanistic review
Wild, M., O'Neill, L., Zhang, T., Purkayastha, R., Minton, G., Marinescu, M., & Offer, G. J. (2015) · Energy & Environmental Science · doi:10.1039/c5ee01388g · Cited by 1,107
Wang, Z., Dong, Y., Li, H., Zhao, Z., Bin Wu, H., Hao, C., Liu, S., Qiu, J., & Lou, X. W. (2014) · Nature Communications · doi:10.1038/ncomms6002 · Cited by 1,059
Song, J., Xu, T., Gordin, M. L., Zhu, P., Lv, D., Jiang, Y., Chen, Y., Duan, Y., & Wang, D. (2014) · Advanced Functional Materials · doi:10.1002/adfm.201302631 · Cited by 978
Role of LiNO3 in rechargeable lithium/sulfur battery
Zhang, S. S. (2012) · Electrochimica Acta · doi:10.1016/j.electacta.2012.03.081 · Cited by 947
Barchasz, C., Molton, F., Duboc, C., Leprêtre, J.-C., Patoux, S., & Alloin, F. (2012) · Analytical Chemistry · doi:10.1021/ac2032244 · Cited by 946
Elazari, R., Salitra, G., Garsuch, A., Panchenko, A., & Aurbach, D. (2011) · Advanced Materials · doi:10.1002/adma.201103274 · Cited by 895
Carbon–sulfur composites for Li–S batteries: status and prospects
Wang, D.-W., Zeng, Q., Zhou, G., Yin, L., Li, F., Cheng, H.-M., Gentle, I. R., & Lu, G. Q. M. (2013) · Journal of Materials Chemistry A · doi:10.1039/c3ta11045a · Cited by 816
Protected Lithium‐Metal Anodes in Batteries: From Liquid to Solid
Yang, C., Fu, K., Zhang, Y., Hitz, E., & Hu, L. (2017) · Advanced Materials · doi:10.1002/adma.201701169 · Cited by 757
Su, Y.-S., & Manthiram, A. (2012) · Chemical Communications · doi:10.1039/c2cc33945e · Cited by 755
Self-citationHigh-Rate, Ultralong Cycle-Life Lithium/Sulfur Batteries Enabled by Nitrogen-Doped Graphene
Qiu, Y., Li, W., Zhao, W., Li, G., Hou, Y., Liu, M., Zhou, L., Ye, F., Li, H., Wei, Z., et al. (2014) · Nano Letters · doi:10.1021/nl5020475 · Cited by 738
Review of energy storage technologies for sustainable power networks
Akinyele, D. O., & Rayudu, R. K. (2014) · Sustainable Energy Technologies and Assessments · doi:10.1016/j.seta.2014.07.004 · Cited by 700
A review of flexible lithium–sulfur and analogous alkali metal–chalcogen rechargeable batteries
Peng, H.-J., Huang, J.-Q., & Zhang, Q. (2017) · Chemical Society Reviews · doi:10.1039/c7cs00139h · Cited by 680
Hagen, M., Hanselmann, D., Ahlbrecht, K., Maça, R., Gerber, D., & Tübke, J. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201401986 · Cited by 636
Recent Advances in Electrolytes for Lithium–Sulfur Batteries
Zhang, S., Ueno, K., Dokko, K., & Watanabe, M. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201500117 · Cited by 616
A Lithium/Dissolved Sulfur Battery with an Organic Electrolyte
Rauh, R. D., Abraham, K. M., Pearson, G. F., Surprenant, J. K., & Brummer, S. B. (1979) · Journal of The Electrochemical Society · doi:10.1149/1.2129079 · Cited by 592
A Cooperative Interface for Highly Efficient Lithium–Sulfur Batteries
Peng, H., Zhang, Z., Huang, J., Zhang, G., Xie, J., Xu, W., Shi, J., Chen, X., Cheng, X., & Zhang, Q. (2016) · Advanced Materials · doi:10.1002/adma.201603401 · Cited by 583
A graphene foam electrode with high sulfur loading for flexible and high energy Li-S batteries
Zhou, G., Li, L., Ma, C., Wang, S., Shi, Y., Koratkar, N., Ren, W., Li, F., & Cheng, H.-M. (2015) · Nano Energy · doi:10.1016/j.nanoen.2014.11.025 · Cited by 570
Greenhouse gas emissions from renewable energy sources: A review of lifecycle considerations
Amponsah, N. Y., Troldborg, M., Kington, B., Aalders, I., & Hough, R. L. (2014) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2014.07.087 · Cited by 558
High Energy Density Lithium–Sulfur Batteries: Challenges of Thick Sulfur Cathodes
Lv, D., Zheng, J., Li, Q., Xie, X., Ferrara, S., Nie, Z., Mehdi, L. B., Browning, N. D., Zhang, J., Graff, G. L., et al. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201402290 · Cited by 554
Rechargeable Lithium Sulfur Battery
Cheon, S.-E., Ko, K.-S., Cho, J.-H., Kim, S.-W., Chin, E.-Y., & Kim, H.-T. (2003) · Journal of The Electrochemical Society · doi:10.1149/1.1571532 · Cited by 553
Peng, H., Huang, J., Zhao, M., Zhang, Q., Cheng, X., Liu, X., Qian, W., & Wei, F. (2014) · Advanced Functional Materials · doi:10.1002/adfm.201303296 · Cited by 552
Hu, G., Xu, C., Sun, Z., Wang, S., Cheng, H., Li, F., & Ren, W. (2016) · Advanced Materials · doi:10.1002/adma.201504765 · Cited by 532
3D Interconnected Electrode Materials with Ultrahigh Areal Sulfur Loading for Li–S Batteries
Fang, R., Zhao, S., Hou, P., Cheng, M., Wang, S., Cheng, H., Liu, C., & Li, F. (2016) · Advanced Materials · doi:10.1002/adma.201506014 · Cited by 532
Pie-like electrode design for high-energy density lithium–sulfur batteries
Li, Z., Zhang, J. T., Chen, Y. M., Li, J., & Lou, X. W. (2015) · Nature Communications · doi:10.1038/ncomms9850 · Cited by 524
Lithium/sulfur batteries with high specific energy: old challenges and new opportunities
Song, M.-K., Cairns, E. J., & Zhang, Y. (2013) · Nanoscale · doi:10.1039/c2nr33044j · Cited by 522
Mao, Y., Li, G., Guo, Y., Li, Z., Liang, C., Peng, X., & Lin, Z. (2017) · Nature Communications · doi:10.1038/ncomms14628 · Cited by 518
Chung, S., & Manthiram, A. (2014) · Advanced Functional Materials · doi:10.1002/adfm.201400845 · Cited by 516
Self-citationRecent progress and remaining challenges in sulfur-based lithium secondary batteries – a review
Bresser, D., Passerini, S., & Scrosati, B. (2013) · Chemical Communications · doi:10.1039/c3cc46131a · Cited by 514
Progress in Mechanistic Understanding and Characterization Techniques of Li‐S Batteries
Xu, R., Lu, J., & Amine, K. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201500408 · Cited by 507
Structural Design of Cathodes for Li‐S Batteries
Pope, M. A., & Aksay, I. A. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201500124 · Cited by 500
The Lithium/Sulfur Rechargeable Cell
Shim, J., Striebel, K. A., & Cairns, E. J. (2002) · Journal of The Electrochemical Society · doi:10.1149/1.1503076 · Cited by 478
Lithium Sulfur Battery: Oxidation/Reduction Mechanisms of Polysulfides in THF Solutions
Yamin, H., Gorenshtein, A., Penciner, J., Sternberg, Y., & Peled, E. (1988) · Journal of The Electrochemical Society · doi:10.1149/1.2095868 · Cited by 471
Phosphorous Pentasulfide as a Novel Additive for High‐Performance Lithium‐Sulfur Batteries
Lin, Z., Liu, Z., Fu, W., Dudney, N. J., & Liang, C. (2013) · Advanced Functional Materials · doi:10.1002/adfm.201200696 · Cited by 450
Evers, S., & Nazar, L. F. (2011) · Chemical Communications · doi:10.1039/c2cc16726c · Cited by 441
Recent advances in lithium–sulfur batteries
Chen, L., & Shaw, L. L. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.05.111 · Cited by 432
Li, Z., Huang, Y., Yuan, L., Hao, Z., & Huang, Y. (2015) · Carbon · doi:10.1016/j.carbon.2015.03.008 · Cited by 429
A review of electrolytes for lithium–sulphur batteries
Scheers, J., Fantini, S., & Johansson, P. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.01.023 · Cited by 429
Rechargeable Lithium Sulfur Battery
Cheon, S.-E., Ko, K.-S., Cho, J.-H., Kim, S.-W., Chin, E.-Y., & Kim, H.-T. (2003) · Journal of The Electrochemical Society · doi:10.1149/1.1571533 · Cited by 424
Progress Towards Commercially Viable Li–S Battery Cells
Urbonaite, S., Poux, T., & Novák, P. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201500118 · Cited by 406
Cheng, X.-B., Huang, J.-Q., Zhang, Q., Peng, H.-J., Zhao, M.-Q., & Wei, F. (2014) · Nano Energy · doi:10.1016/j.nanoen.2013.12.013 · Cited by 403
High-Performance Li–S Batteries with an Ultra-lightweight MWCNT-Coated Separator
Chung, S.-H., & Manthiram, A. (2014) · The Journal of Physical Chemistry Letters · doi:10.1021/jz5006913 · Cited by 393
Self-citationRecent progress on flexible lithium rechargeable batteries
Gwon, H., Hong, J., Kim, H., Seo, D.-H., Jeon, S., & Kang, K. (2014) · Energy Environ. Sci. · doi:10.1039/c3ee42927j · Cited by 391
A review of recent developments in rechargeable lithium–sulfur batteries
Kang, W., Deng, N., Ju, J., Li, Q., Wu, D., Ma, X., Li, L., Naebe, M., & Cheng, B. (2016) · Nanoscale · doi:10.1039/c6nr04923k · Cited by 391
Chen, W., Qian, T., Xiong, J., Xu, N., Liu, X., Liu, J., Zhou, J., Shen, X., Yang, T., Chen, Y., et al. (2017) · Advanced Materials · doi:10.1002/adma.201605160 · Cited by 382
Carbonized Eggshell Membrane as a Natural Polysulfide Reservoir for Highly Reversible Li‐S Batteries
Chung, S., & Manthiram, A. (2014) · Advanced Materials · doi:10.1002/adma.201304365 · Cited by 375
Self-citationChung, S., & Manthiram, A. (2014) · Advanced Materials · doi:10.1002/adma.201402893 · Cited by 364
Self-citationElectrochemistry of a nonaqueous lithium/sulfur cell
Yamin, H., & Peled, E. (1983) · Journal of Power Sources · doi:10.1016/0378-7753(83)87029-3 · Cited by 360
Encapsulated Monoclinic Sulfur for Stable Cycling of Li–S Rechargeable Batteries
Moon, S., Jung, Y. H., Jung, W. K., Jung, D. S., Choi, J. W., & Kim, D. K. (2013) · Advanced Materials · doi:10.1002/adma.201303166 · Cited by 354
Exploiting a robust biopolymer network binder for an ultrahigh-areal-capacity Li–S battery
Liu, J., Galpaya, D. G. D., Yan, L., Sun, M., Lin, Z., Yan, C., Liang, C., & Zhang, S. (2017) · Energy & Environmental Science · doi:10.1039/c6ee03033e · Cited by 347
Formation of lithium polysulfides in aprotic media
Rauh, R. D., Shuker, F. S., Marston, J. M., & Brummer, S. B. (1977) · Journal of Inorganic and Nuclear Chemistry · doi:10.1016/0022-1902(77)80198-x · Cited by 338
Highly Reversible Lithium/Dissolved Polysulfide Batteries with Carbon Nanotube Electrodes
Fu, Y., Su, Y., & Manthiram, A. (2013) · Angewandte Chemie International Edition · doi:10.1002/anie.201301250 · Cited by 334
Self-citationLithium–sulfur batteries—the solution is in the electrolyte, but is the electrolyte a solution?
Barghamadi, M., Best, A. S., Bhatt, A. I., Hollenkamp, A. F., Musameh, M., Rees, R. J., & Rüther, T. (2014) · Energy Environ. Sci. · doi:10.1039/c4ee02192d · Cited by 324
Qie, L., Zu, C., & Manthiram, A. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201502459 · Cited by 321
Self-citationA Comprehensive Approach toward Stable Lithium–Sulfur Batteries with High Volumetric Energy Density
Pang, Q., Liang, X., Kwok, C. Y., Kulisch, J., & Nazar, L. F. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201601630 · Cited by 321
An interdisciplinary review of energy storage for communities: Challenges and perspectives
Parra, D., Swierczynski, M., Stroe, D. I., Norman, S. A., Abdon, A., Worlitschek, J., O’Doherty, T., Rodrigues, L., Gillott, M., Zhang, X., et al. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.05.003 · Cited by 307
Nanostructured Li2S–C Composites as Cathode Material for High-Energy Lithium/Sulfur Batteries
Cai, K., Song, M.-K., Cairns, E. J., & Zhang, Y. (2012) · Nano Letters · doi:10.1021/nl303965a · Cited by 307
Monodispersed Sulfur Nanoparticles for Lithium–Sulfur Batteries with Theoretical Performance
Chen, H., Wang, C., Dong, W., Lu, W., Du, Z., & Chen, L. (2015) · Nano Letters · doi:10.1021/nl504963e · Cited by 304
A Review on Li-S Batteries as a High Efficiency Rechargeable Lithium Battery
Barghamadi, M., Kapoor, A., & Wen, C. (2013) · Journal of The Electrochemical Society · doi:10.1149/2.096308jes · Cited by 299
A Facile Layer‐by‐Layer Approach for High‐Areal‐Capacity Sulfur Cathodes
Qie, L., & Manthiram, A. (2015) · Advanced Materials · doi:10.1002/adma.201405689 · Cited by 290
Self-citationA new direction for the performance improvement of rechargeable lithium/sulfur batteries
Zhang, S. S., & Read, J. A. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.10.076 · Cited by 289
Chung, S., Chang, C., & Manthiram, A. (2016) · ACS Nano · doi:10.1021/acsnano.6b06369 · Cited by 282
Self-citationMcCloskey, B. D. (2015) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.5b01814 · Cited by 281
Chung, S., Han, P., Singhal, R., Kalra, V., & Manthiram, A. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201500738 · Cited by 280
Self-citationReview—Li Metal Anode in Working Lithium-Sulfur Batteries
Cheng, X.-B., Huang, J.-Q., & Zhang, Q. (2018) · Journal of The Electrochemical Society · doi:10.1149/2.0111801jes · Cited by 277
Peng, H., Xu, W., Zhu, L., Wang, D., Huang, J., Cheng, X., Yuan, Z., Wei, F., & Zhang, Q. (2016) · Advanced Functional Materials · doi:10.1002/adfm.201602071 · Cited by 256
Li/S fundamental chemistry and application to high-performance rechargeable batteries
AKRIDGE, J. (2004) · Solid State Ionics · doi:10.1016/j.ssi.2004.07.070 · Cited by 251
Eroglu, D., Zavadil, K. R., & Gallagher, K. G. (2015) · Journal of The Electrochemical Society · doi:10.1149/2.0611506jes · Cited by 224
Lee, C.-W., Pang, Q., Ha, S., Cheng, L., Han, S.-D., Zavadil, K. R., Gallagher, K. G., Nazar, L. F., & Balasubramanian, M. (2017) · ACS Central Science · doi:10.1021/acscentsci.7b00123 · Cited by 212
High Energy Rechargeable Li-S Cells for EV Application: Status, Remaining Problems and Solutions
Mikhaylik, Y. V., Kovalev, I., Schock, R., Kumaresan, K., Xu, J., & Affinito, J. (2010) · ECS Transactions · doi:10.1149/1.3414001 · Cited by 209
Lu, S., Chen, Y., Wu, X., Wang, Z., & Li, Y. (2014) · Scientific Reports · doi:10.1038/srep04629 · Cited by 203
Miao, L., Wang, W., Yuan, K., et al. (2014) · Chemical Communications · doi:10.1039/c4cc03410d · Cited by 194
Chang, C.-H., Chung, S.-H., & Manthiram, A. (2016) · Small · doi:10.1002/smll.201502505 · Cited by 194
Self-citationWaluś, S., Barchasz, C., Bouchet, R., Leprêtre, J., Colin, J., Martin, J., Elkaïm, E., Baehtz, C., & Alloin, F. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201500165 · Cited by 184
Designing Lithium-Sulfur Cells with Practically Necessary Parameters
Chung, S.-H., & Manthiram, A. (2018) · Joule · doi:10.1016/j.joule.2018.01.002 · Cited by 184
Self-citationChen, S., Dai, F., Gordin, M. L., Yu, Z., Gao, Y., Song, J., & Wang, D. (2016) · Angewandte Chemie International Edition · doi:10.1002/anie.201511830 · Cited by 183
Cell energy density and electrolyte/sulfur ratio in Li–S cells
Hagen, M., Fanz, P., & Tübke, J. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.04.018 · Cited by 177
Low Temperature Performance of Li/S Batteries
Mikhaylik, Y., & Akridge, J. R. (2003) · Journal of The Electrochemical Society · doi:10.1149/1.1545452 · Cited by 162
Hollow cobalt sulfide polyhedra-enabled long-life, high areal-capacity lithium-sulfur batteries
Xu, H., & Manthiram, A. (2017) · Nano Energy · doi:10.1016/j.nanoen.2017.01.007 · Cited by 162
Self-citationPerspective—Commercializing Lithium Sulfur Batteries: Are We Doing the Right Research?
Cleaver, T., Kováčik, P., Marinescu, M., Zhang, T., & Offer, G. J. (2017) · Journal of The Electrochemical Society · doi:10.1149/2.0071801jes · Cited by 159
In Situ-Formed Li2S in Lithiated Graphite Electrodes for Lithium–Sulfur Batteries
Fu, Y., Zu, C., & Manthiram, A. (2013) · Journal of the American Chemical Society · doi:10.1021/ja409705u · Cited by 155
Self-citationHagen, M., Dörfler, S., Fanz, P., et al. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.10.004 · Cited by 154
Zhao, Y., Feng, J., Liu, X., Wang, F., Wang, L., Shi, C., Huang, L., Feng, X. Y., Chen, X., Xu, L., et al. (2014) · Nature Communications · doi:10.1038/ncomms5565 · Cited by 154
A core–shell electrode for dynamically and statically stable Li–S battery chemistry
Chung, S., Chang, C., & Manthiram, A. (2016) · Energy & Environmental Science · doi:10.1039/c6ee01280a · Cited by 139
Self-citationShi, J., Tang, C., Peng, H., Zhu, L. Z., Cheng, X., Huang, J., Zhu, W., & Zhang, Q. (2015) · Small · doi:10.1002/smll.201501467 · Cited by 138
Students’ voice: The hopes and fears of student-teacher candidates
Shoyer, S., & Leshem, S. (2016) · Cogent Education · doi:10.1080/2331186x.2016.1139438 · Cited by 127
New insight into liquid electrolyte of rechargeable lithium/sulfur battery
Zhang, S. S. (2013) · Electrochimica Acta · doi:10.1016/j.electacta.2013.02.122 · Cited by 123
A Hierarchical Particle–Shell Architecture for Long‐Term Cycle Stability of Li2S Cathodes
Wu, F., Lee, J. T., Fan, F., Nitta, N., Kim, H., Zhu, T., & Yushin, G. N. (2015) · Advanced Materials · doi:10.1002/adma.201502289 · Cited by 123
Cheon, S.-E., Cho, J., Ko, K.-S., et al. (2002) · Journal of The Electrochemical Society · doi:10.1149/1.1511187 · Cited by 123
Systematic Effect for an Ultralong Cycle Lithium–Sulfur Battery
Wu, F., Ye, Y., Chen, R., Qian, J., Zhao, T., Li, L., & Li, W. (2015) · Nano Letters · doi:10.1021/acs.nanolett.5b02864 · Cited by 116
Key Parameters Governing the Energy Density of Rechargeable Li/S Batteries
Gao, J., & Abruña, H. D. (2014) · The Journal of Physical Chemistry Letters · doi:10.1021/jz5001819 · Cited by 113
Du, W., Yin, Y., Zeng, X., Shi, J., Zhang, S., Wan, L., & Guo, Y. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b07468 · Cited by 112
Dendrite‐Free Lithium Anode via a Homogenous Li‐Ion Distribution Enabled by a Kimwipe Paper
Chang, C., Chung, S., & Manthiram, A. (2017) · Advanced Sustainable Systems · doi:10.1002/adsu.201600034 · Cited by 104
Self-citationSun, Q., Fang, X., Weng, W., Deng, J., Chen, P., Ren, J., Guan, G., Wang, M., & Peng, H. (2015) · Angewandte Chemie International Edition · doi:10.1002/anie.201504514 · Cited by 98
Safari, M., Kwok, C. Y., & Nazar, L. F. (2016) · ACS Central Science · doi:10.1021/acscentsci.6b00169 · Cited by 96
Hong, X., Jin, J. H., Wu, T., Yang, L., Zhang, S., Chen, C., & Wen, Z. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta03552g · Cited by 81
Peled, E., Goor, M., Schektman, I., Mukra, T., Shoval, Y., & Golodnitsky, D. (2016) · Journal of The Electrochemical Society · doi:10.1149/2.0161701jes · Cited by 77
Introducing ion-transport-regulating nanochannels to lithium-sulfur batteries
Pan, Y., Zhou, Y., Zhao, Q. X., Dou, Y., Chou, S., Cheng, F., Chen, J., Liu, H., Jiang, L., & Dou, S. X. (2017) · Nano Energy · doi:10.1016/j.nanoen.2017.01.025 · Cited by 66
Han, S., Pu, X., Li, X., Liu, M., Li, M., Feng, N., Dou, S., & Hu, W. (2017) · Electrochimica Acta · doi:10.1016/j.electacta.2017.05.005 · Cited by 48
Jung, Y., & Kang, B. (2016) · Physical Chemistry Chemical Physics · doi:10.1039/c6cp03146c · Cited by 47
Nara, H., Yokoshima, T., Mikuriya, H., Tsuda, S., Momma, T., & Ōsaka, T. (2016) · Journal of The Electrochemical Society · doi:10.1149/2.0381701jes · Cited by 37
Sulfur Cathodes with Carbon Current Collector for Li-S cells
Hagen, M., Feisthammel, G., Fanz, P., Grossmann, H. T., Dörfler, S., Tübke, J., Hoffmann, M. J., Börner, D., Joos, M., Althues, H., et al. (2013) · Journal of The Electrochemical Society · doi:10.1149/2.149306jes · Cited by 26
A novel device structure for a low-cost Li–S battery
Liu, Z., Zheng, X., Yuan, N., & Ding, J. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta08828g · Cited by 14
Cited by
A Perspective toward Practical Lithium–Sulfur Batteries
Zhao, M., Li, B.-Q., Zhang, X.-Q., Huang, J.-Q., & Zhang, Q. (2020) · ACS Central Science · doi:10.1021/acscentsci.0c00449 · Cited by 858
Lithium–Sulfur Batteries under Lean Electrolyte Conditions: Challenges and Opportunities
Zhao, M., Li, B., Peng, H., Yuan, H., Wei, J., & Huang, J. (2020) · Angewandte Chemie International Edition · doi:10.1002/anie.201909339 · Cited by 663
Yuan, H., Peng, H., Li, B., Xie, J., Kong, L., Zhao, M., Chen, X., Huang, J., & Zhang, Q. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201802768 · Cited by 626
Current Status and Future Prospects of Metal–Sulfur Batteries
Chung, S., & Manthiram, A. (2019) · Advanced Materials · doi:10.1002/adma.201901125 · Cited by 622
Self-citationBridging the academic and industrial metrics for next-generation practical batteries
Cao, Y., Li, M., Lu, J., Liu, J., & Amine, K. (2019) · Nature Nanotechnology · doi:10.1038/s41565-019-0371-8 · Cited by 612
Metadata
- Authors
- Chung, S., Chang, C., & Manthiram, A.
- Venue
- Advanced Functional Materials
- Publisher
- Wiley
- Published
- 2018-05-29
- Volume
- 28
- Issue
- 28
- ISSN
- 1616-301X (ISSN-L)
- 1616-3028
- OpenAlex
- W2807433987
- Cited by
- 477
- References
- 131
- FWCI
- 23.14
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.