The DOI matches its Crossref record; 205 of the 205 references it cites were found in a registry or an index.
More Reliable Lithium‐Sulfur Batteries: Status, Solutions and Prospects
Abstract
Lithium‐sulfur (Li‐S) batteries have attracted tremendous interest because of their high theoretical energy density and cost effectiveness. The target of Li‐S battery research is to produce batteries with a high useful energy density that at least outperforms state‐of‐the‐art lithium‐ion batteries. However, due to an intrinsic gap between fundamental research and practical applications, the outstanding electrochemical results obtained in most Li‐S battery studies indeed correspond to low useful energy densities and are not really suitable for practical requirements. The Li‐S battery is a complex device and its useful energy density is determined by a number of design parameters, most of which are often ignored, leading to the failure to meet commercial requirements. The purpose of this review is to discuss how to pave the way for reliable Li‐S batteries. First, the current research status of Li‐S batteries is briefly reviewed based on statistical information obtained from literature. This includes an analysis of how the various parameters influence the useful energy density and a summary of existing problems in the current Li‐S battery research. Possible solutions and some concerns regarding the construction of reliable Li‐S batteries are comprehensively discussed. Finally, insights are offered on the future directions and prospects in Li‐S battery field.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Armand, M., & Tarascon, J.-M. (2008) · Nature · doi:10.1038/451652a · Cited by 19,612
Challenges for Rechargeable Li Batteries
Goodenough, J. B., & Kim, Y. (2010) · Chemistry of Materials · doi:10.1021/cm901452z · Cited by 10,943
Li-O2 and Li-S batteries with high energy storage
Bruce, P. G., Freunberger, S. A., Hardwick, L. J., & Tarascon, J.-M. (2012) · Nature Materials · doi:10.1038/nmat3191 · Cited by 9,479
A highly ordered nanostructured carbon–sulphur cathode for lithium–sulphur batteries
Ji, X., Lee, K. T., & Nazar, L. F. (2009) · Nature Materials · doi:10.1038/nmat2460 · Cited by 5,988
Advanced Materials for Energy Storage
Liu, C., Li, F., Ma, L., & Cheng, H. (2010) · Advanced Materials · doi:10.1002/adma.200903328 · Cited by 4,765
Self-citationRechargeable Lithium–Sulfur Batteries
Manthiram, A., Fu, Y., Chung, S.-H., Zu, C., & Su, Y.-S. (2014) · Chemical Reviews · doi:10.1021/cr500062v · Cited by 4,665
Designing high-energy lithium–sulfur batteries
Seh, Z. W., Sun, Y., Zhang, Q., & Cui, Y. (2016) · Chemical Society Reviews · doi:10.1039/c5cs00410a · Cited by 2,573
High rate and stable cycling of lithium metal anode
Qian, J., Henderson, W. A., Xu, W., Bhattacharya, P., Engelhard, M., Borodin, O., & Zhang, J.-G. (2015) · Nature Communications · doi:10.1038/ncomms7362 · Cited by 2,561
A new class of Solvent-in-Salt electrolyte for high-energy rechargeable metallic lithium batteries
Suo, L., Hu, Y.-S., Li, H., Armand, M., & Chen, L. (2013) · Nature Communications · doi:10.1038/ncomms2513 · Cited by 2,314
Wang, H., Yang, Y., Liang, Y., Robinson, J. T., Li, Y., Jackson, A., Cui, Y., & Dai, H. (2011) · Nano Letters · doi:10.1021/nl200658a · Cited by 2,119
Polysulfide Shuttle Study in the Li/S Battery System
Mikhaylik, Y. V., & Akridge, J. R. (2004) · Journal of The Electrochemical Society · doi:10.1149/1.1806394 · Cited by 2,115
Dendrite-Free Lithium Deposition via Self-Healing Electrostatic Shield Mechanism
Ding, F., Xu, W., Graff, G. L., Zhang, J., Sushko, M. L., Chen, X., Shao, Y., Engelhard, M. H., Nie, Z., Xiao, J., et al. (2013) · Journal of the American Chemical Society · doi:10.1021/ja312241y · Cited by 2,107
Wei Seh, Z., Li, W., Cha, J. J., Zheng, G., Yang, Y., McDowell, M. T., Hsu, P.-C., & Cui, Y. (2013) · Nature Communications · doi:10.1038/ncomms2327 · Cited by 2,107
Porous Hollow Carbon@Sulfur Composites for High‐Power Lithium–Sulfur Batteries
Jayaprakash, N., Shen, J., Moganty, S. S., Corona, A., & Archer, L. A. (2011) · Angewandte Chemie International Edition · doi:10.1002/anie.201100637 · Cited by 1,811
Lin, D., Liu, Y., Liang, Z., Lee, H.-W., Sun, J., Wang, H., Yan, K., Xie, J., & Cui, Y. (2016) · Nature Nanotechnology · doi:10.1038/nnano.2016.32 · Cited by 1,798
Interconnected hollow carbon nanospheres for stable lithium metal anodes
Zheng, G., Lee, S. W., Liang, Z., Lee, H.-W., Yan, K., Yao, H., Wang, H., Li, W., Chu, S., & Cui, Y. (2014) · Nature Nanotechnology · doi:10.1038/nnano.2014.152 · Cited by 1,764
Aurbach, D. (2002) · Solid State Ionics · doi:10.1016/s0167-2738(02)00080-2 · Cited by 1,697
Smaller Sulfur Molecules Promise Better Lithium–Sulfur Batteries
Xin, S., Gu, L., Zhao, N.-H., Yin, Y.-X., Zhou, L.-J., Guo, Y.-G., & Wan, L.-J. (2012) · Journal of the American Chemical Society · doi:10.1021/ja308170k · Cited by 1,644
Lithium–Sulfur Batteries: Progress and Prospects
Manthiram, A., Chung, S., & Zu, C. (2015) · Advanced Materials · doi:10.1002/adma.201405115 · Cited by 1,620
Liquid electrolyte lithium/sulfur battery: Fundamental chemistry, problems, and solutions
Zhang, S. S. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.12.102 · Cited by 1,592
Yang, C.-P., Yin, Y.-X., Zhang, S.-F., Li, N.-W., & Guo, Y.-G. (2015) · Nature Communications · doi:10.1038/ncomms9058 · Cited by 1,589
The synergetic effect of lithium polysulfide and lithium nitrate to prevent lithium dendrite growth
Li, W., Yao, H., Yan, K., Zheng, G., Liang, Z., Chiang, Y.-M., & Cui, Y. (2015) · Nature Communications · doi:10.1038/ncomms8436 · Cited by 1,540
Graphene Oxide as a Sulfur Immobilizer in High Performance Lithium/Sulfur Cells
Ji, L., Rao, M., Zheng, H., Zhang, L., Li, Y., Duan, W., Guo, J., Cairns, E. J., & Zhang, Y. (2011) · Journal of the American Chemical Society · doi:10.1021/ja206955k · Cited by 1,505
Lithium–sulphur batteries with a microporous carbon paper as a bifunctional interlayer
Su, Y.-S., & Manthiram, A. (2012) · Nature Communications · doi:10.1038/ncomms2163 · Cited by 1,458
Powering Lithium–Sulfur Battery Performance by Propelling Polysulfide Redox at Sulfiphilic Hosts
Yuan, Z., Peng, H.-J., Hou, T.-Z., Huang, J.-Q., Chen, C.-M., Wang, D.-W., Cheng, X.-B., Wei, F., & Zhang, Q. (2016) · Nano Letters · doi:10.1021/acs.nanolett.5b04166 · Cited by 1,438
Self-citationTao, X., Wang, J., Liu, C., Wang, H., Yao, H., Zheng, G., Seh, Z. W., Cai, Q., Li, W., Zhou, G., et al. (2016) · Nature Communications · doi:10.1038/ncomms11203 · Cited by 1,391
Metal–organic framework-based separator for lithium–sulfur batteries
Bai, S., Liu, X., Zhu, K., Wu, S., & Zhou, H. (2016) · Nature Energy · doi:10.1038/nenergy.2016.94 · Cited by 1,333
New Approaches for High Energy Density Lithium–Sulfur Battery Cathodes
Evers, S., & Nazar, L. F. (2013) · Accounts of Chemical Research · doi:10.1021/ar3001348 · Cited by 1,324
Pang, Q., Kundu, D., Cuisinier, M., & Nazar, L. F. (2014) · Nature Communications · doi:10.1038/ncomms5759 · Cited by 1,318
Zheng, G., Yang, Y., Cha, J. J., Hong, S. S., & Cui, Y. (2011) · Nano Letters · doi:10.1021/nl2027684 · Cited by 1,295
Zhang, B., Qin, X., Li, G. R., & Gao, X. P. (2010) · Energy & Environmental Science · doi:10.1039/c002639e · Cited by 1,280
Sulfur-Impregnated Disordered Carbon Nanotubes Cathode for Lithium–Sulfur Batteries
Guo, J., Xu, Y., & Wang, C. (2011) · Nano Letters · doi:10.1021/nl202297p · Cited by 1,278
Sulfur Cathodes Based on Conductive MXene Nanosheets for High‐Performance Lithium–Sulfur Batteries
Liang, X., Garsuch, A., & Nazar, L. F. (2015) · Angewandte Chemie International Edition · doi:10.1002/anie.201410174 · Cited by 1,201
Spherical Ordered Mesoporous Carbon Nanoparticles with High Porosity for Lithium–Sulfur Batteries
Schuster, J., He, G., Mandlmeier, B., Yim, T., Lee, K. T., Bein, T., & Nazar, L. F. (2012) · Angewandte Chemie International Edition · doi:10.1002/anie.201107817 · Cited by 1,114
Electrochemical energy storage in a sustainable modern society
Goodenough, J. B. (2014) · Energy Environ. Sci. · doi:10.1039/c3ee42613k · Cited by 1,073
Wang, Z., Dong, Y., Li, H., Zhao, Z., Bin Wu, H., Hao, C., Liu, S., Qiu, J., & Lou, X. W. (2014) · Nature Communications · doi:10.1038/ncomms6002 · Cited by 1,059
Zhou, G., Paek, E., Hwang, G. S., & Manthiram, A. (2015) · Nature Communications · doi:10.1038/ncomms8760 · Cited by 1,058
Xiao, L., Cao, Y., Xiao, J., Schwenzer, B., Engelhard, M. H., Saraf, L. V., Nie, Z., Exarhos, G. J., & Liu, J. (2012) · Advanced Materials · doi:10.1002/adma.201103392 · Cited by 1,016
A Graphene–Pure‐Sulfur Sandwich Structure for Ultrafast, Long‐Life Lithium–Sulfur Batteries
Zhou, G., Pei, S., Li, L., Wang, D., Wang, S., Huang, K., Yin, L., Li, F., & Cheng, H. (2014) · Advanced Materials · doi:10.1002/adma.201302877 · Cited by 997
Self-citationSong, J., Xu, T., Gordin, M. L., Zhu, P., Lv, D., Jiang, Y., Chen, Y., Duan, Y., & Wang, D. (2014) · Advanced Functional Materials · doi:10.1002/adfm.201302631 · Cited by 978
Self-citationRole of LiNO3 in rechargeable lithium/sulfur battery
Zhang, S. S. (2012) · Electrochimica Acta · doi:10.1016/j.electacta.2012.03.081 · Cited by 947
Lithium-coated polymeric matrix as a minimum volume-change and dendrite-free lithium metal anode
Liu, Y., Lin, D., Liang, Z., Zhao, J., Yan, K., & Cui, Y. (2016) · Nature Communications · doi:10.1038/ncomms10992 · Cited by 902
Elazari, R., Salitra, G., Garsuch, A., Panchenko, A., & Aurbach, D. (2011) · Advanced Materials · doi:10.1002/adma.201103274 · Cited by 895
Improving the Performance of Lithium–Sulfur Batteries by Conductive Polymer Coating
Yang, Y., Yu, G., Cha, J. J., Wu, H., Vosgueritchian, M., Yao, Y., Bao, Z., & Cui, Y. (2011) · ACS Nano · doi:10.1021/nn203436j · Cited by 866
Stabilizing lithium–sulphur cathodes using polysulphide reservoirs
Ji, X., Evers, S., Black, R., & Nazar, L. F. (2011) · Nature Communications · doi:10.1038/ncomms1293 · Cited by 864
Hierarchically Structured Sulfur/Carbon Nanocomposite Material for High-Energy Lithium Battery
Liang, C., Dudney, N. J., & Howe, J. Y. (2009) · Chemistry of Materials · doi:10.1021/cm902050j · Cited by 862
Evolution of Strategies for Modern Rechargeable Batteries
Goodenough, J. B. (2013) · Accounts of Chemical Research · doi:10.1021/ar2002705 · Cited by 859
Li, Z., Zhang, J., & Lou, X. W. (. (2015) · Angewandte Chemie International Edition · doi:10.1002/anie.201506972 · Cited by 841
Carbon–sulfur composites for Li–S batteries: status and prospects
Wang, D.-W., Zeng, Q., Zhou, G., Yin, L., Li, F., Cheng, H.-M., Gentle, I. R., & Lu, G. Q. M. (2013) · Journal of Materials Chemistry A · doi:10.1039/c3ta11045a · Cited by 816
Self-citationHuang, J.-Q., Zhuang, T.-Z., Zhang, Q., Peng, H.-J., Chen, C.-M., & Wei, F. (2015) · ACS Nano · doi:10.1021/nn507178a · Cited by 809
Li, G., Sun, J., Hou, W., Jiang, S., Huang, Y., & Geng, J. (2016) · Nature Communications · doi:10.1038/ncomms10601 · Cited by 806
Confining Sulfur in Double‐Shelled Hollow Carbon Spheres for Lithium–Sulfur Batteries
Zhang, C., Wu, H. B., Yuan, C., Guo, Z., & Lou, X. W. (. (2012) · Angewandte Chemie International Edition · doi:10.1002/anie.201205292 · Cited by 800
Yolk–Shell Structure of Polyaniline-Coated Sulfur for Lithium–Sulfur Batteries
Zhou, W., Yu, Y., Chen, H., DiSalvo, F. J., & Abruña, H. D. (2013) · Journal of the American Chemical Society · doi:10.1021/ja409508q · Cited by 782
Pang, Q., Tang, J., Huang, H., Liang, X., Hart, C., Tam, K. C., & Nazar, L. F. (2015) · Advanced Materials · doi:10.1002/adma.201502467 · Cited by 780
Song, J., Gordin, M. L., Xu, T., Chen, S., Yu, Z., Sohn, H., Lu, J., Ren, Y., Duan, Y., & Wang, D. (2015) · Angewandte Chemie International Edition · doi:10.1002/anie.201411109 · Cited by 776
Self-citationFibrous Hybrid of Graphene and Sulfur Nanocrystals for High-Performance Lithium–Sulfur Batteries
Zhou, G., Yin, L.-C., Wang, D.-W., Li, L., Pei, S., Gentle, I. R., Li, F., & Cheng, H.-M. (2013) · ACS Nano · doi:10.1021/nn401228t · Cited by 761
Self-citationSu, Y.-S., & Manthiram, A. (2012) · Chemical Communications · doi:10.1039/c2cc33945e · Cited by 755
High-Rate, Ultralong Cycle-Life Lithium/Sulfur Batteries Enabled by Nitrogen-Doped Graphene
Qiu, Y., Li, W., Zhao, W., Li, G., Hou, Y., Liu, M., Zhou, L., Ye, F., Li, H., Wei, Z., et al. (2014) · Nano Letters · doi:10.1021/nl5020475 · Cited by 738
Yang, Y., Zheng, G., Misra, S., Nelson, J., Toney, M. F., & Cui, Y. (2012) · Journal of the American Chemical Society · doi:10.1021/ja3052206 · Cited by 718
Zheng, G., Zhang, Q., Cha, J. J., Yang, Y., Li, W., Seh, Z. W., & Cui, Y. (2013) · Nano Letters · doi:10.1021/nl304795g · Cited by 705
Tao, X., Wang, J., Ying, Z., Cai, Q., Zheng, G., Gan, Y., Huang, H., Xia, Y., Liang, C., Zhang, W., et al. (2014) · Nano Letters · doi:10.1021/nl502331f · Cited by 687
Ionic shield for polysulfides towards highly-stable lithium–sulfur batteries
Huang, J.-Q., Zhang, Q., Peng, H.-J., Liu, X.-Y., Qian, W.-Z., & Wei, F. (2014) · Energy Environ. Sci. · doi:10.1039/c3ee42223b · Cited by 679
Huang, J.-Q., Zhang, Q., & Wei, F. (2015) · Energy Storage Materials · doi:10.1016/j.ensm.2015.09.008 · Cited by 665
Unstacked double-layer templated graphene for high-rate lithium–sulphur batteries
Zhao, M.-Q., Zhang, Q., Huang, J.-Q., Tian, G.-L., Nie, J.-Q., Peng, H.-J., & Wei, F. (2014) · Nature Communications · doi:10.1038/ncomms4410 · Cited by 664
Li, W., Zhang, Q., Zheng, G., Seh, Z. W., Yao, H., & Cui, Y. (2013) · Nano Letters · doi:10.1021/nl403130h · Cited by 654
New Nanostructured Li2S/Silicon Rechargeable Battery with High Specific Energy
Yang, Y., McDowell, M. T., Jackson, A., Cha, J. J., Hong, S. S., & Cui, Y. (2010) · Nano Letters · doi:10.1021/nl100504q · Cited by 653
Enhanced Electrochemical Kinetics on Conductive Polar Mediators for Lithium–Sulfur Batteries
Peng, H., Zhang, G., Chen, X., Zhang, Z., Xu, W., Huang, J., & Zhang, Q. (2016) · Angewandte Chemie International Edition · doi:10.1002/anie.201605676 · Cited by 649
Hagen, M., Hanselmann, D., Ahlbrecht, K., Maça, R., Gerber, D., & Tübke, J. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201401986 · Cited by 636
Mesoporous Titanium Nitride‐Enabled Highly Stable Lithium‐Sulfur Batteries
Cui, Z., Zu, C., Zhou, W., Manthiram, A., & Goodenough, J. B. (2016) · Advanced Materials · doi:10.1002/adma.201601382 · Cited by 611
Gao, J., Lowe, M. A., Kiya, Y., & Abruña, H. D. (2011) · The Journal of Physical Chemistry C · doi:10.1021/jp207714c · Cited by 600
A novel synergistic composite with multi-functional effects for high-performance Li–S batteries
Li, Y.-J., Fan, J.-M., Zheng, M.-S., & Dong, Q.-F. (2016) · Energy & Environmental Science · doi:10.1039/c6ee00104a · Cited by 600
Carbon materials for Li–S batteries: Functional evolution and performance improvement
Liang, J., Sun, Z.-H., Li, F., & Cheng, H.-M. (2016) · Energy Storage Materials · doi:10.1016/j.ensm.2015.09.007 · Cited by 593
Self-citationA Lithium/Dissolved Sulfur Battery with an Organic Electrolyte
Rauh, R. D., Abraham, K. M., Pearson, G. F., Surprenant, J. K., & Brummer, S. B. (1979) · Journal of The Electrochemical Society · doi:10.1149/1.2129079 · Cited by 592
A Flexible Sulfur‐Graphene‐Polypropylene Separator Integrated Electrode for Advanced Li–S Batteries
Zhou, G., Li, L., Wang, D., Shan, X., Pei, S., Li, F., & Cheng, H. (2015) · Advanced Materials · doi:10.1002/adma.201404210 · Cited by 590
Self-citationTang, C., Zhang, Q., Zhao, M., Huang, J., Cheng, X., Tian, G., Peng, H., & Wei, F. (2014) · Advanced Materials · doi:10.1002/adma.201401243 · Cited by 586
A Cooperative Interface for Highly Efficient Lithium–Sulfur Batteries
Peng, H., Zhang, Z., Huang, J., Zhang, G., Xie, J., Xu, W., Shi, J., Chen, X., Cheng, X., & Zhang, Q. (2016) · Advanced Materials · doi:10.1002/adma.201603401 · Cited by 583
Metal–Sulfur Battery Cathodes Based on PAN–Sulfur Composites
Wei, S., Ma, L., Hendrickson, K. E., Tu, Z., & Archer, L. A. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b08113 · Cited by 579
A graphene foam electrode with high sulfur loading for flexible and high energy Li-S batteries
Zhou, G., Li, L., Ma, C., Wang, S., Shi, Y., Koratkar, N., Ren, W., Li, F., & Cheng, H.-M. (2015) · Nano Energy · doi:10.1016/j.nanoen.2014.11.025 · Cited by 570
Self-citationSong, J., Yu, Z., Gordin, M. L., & Wang, D. (2016) · Nano Letters · doi:10.1021/acs.nanolett.5b03217 · Cited by 561
Self-citationZhang, J., Hu, H., Li, Z., & Lou, X. W. (. (2016) · Angewandte Chemie International Edition · doi:10.1002/anie.201511632 · Cited by 560
Pei, F., An, T., Zang, J., Zhao, X., Fang, X., Zheng, M., Dong, Q., & Zheng, N. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201502539 · Cited by 555
High Energy Density Lithium–Sulfur Batteries: Challenges of Thick Sulfur Cathodes
Lv, D., Zheng, J., Li, Q., Xie, X., Ferrara, S., Nie, Z., Mehdi, L. B., Browning, N. D., Zhang, J., Graff, G. L., et al. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201402290 · Cited by 554
Zhao, M.-Q., Liu, X.-F., Zhang, Q., Tian, G.-L., Huang, J.-Q., Zhu, W., & Wei, F. (2012) · ACS Nano · doi:10.1021/nn304037d · Cited by 553
Peng, H., Huang, J., Zhao, M., Zhang, Q., Cheng, X., Liu, X., Qian, W., & Wei, F. (2014) · Advanced Functional Materials · doi:10.1002/adfm.201303296 · Cited by 552
Multi‐Functional Layered WS2 Nanosheets for Enhancing the Performance of Lithium–Sulfur Batteries
Lei, T., Chen, W., Huang, J., Yan, C., Sun, H., Wang, C., Zhang, W., Li, Y., & Xiong, J. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201601843 · Cited by 548
Hu, G., Xu, C., Sun, Z., Wang, S., Cheng, H., Li, F., & Ren, W. (2016) · Advanced Materials · doi:10.1002/adma.201504765 · Cited by 532
Self-citation3D Interconnected Electrode Materials with Ultrahigh Areal Sulfur Loading for Li–S Batteries
Fang, R., Zhao, S., Hou, P., Cheng, M., Wang, S., Cheng, H., Liu, C., & Li, F. (2016) · Advanced Materials · doi:10.1002/adma.201506014 · Cited by 532
Self-citationLi, G., Li, G., Ye, S., & Gao, X. (2012) · Advanced Energy Materials · doi:10.1002/aenm.201200017 · Cited by 528
Pie-like electrode design for high-energy density lithium–sulfur batteries
Li, Z., Zhang, J. T., Chen, Y. M., Li, J., & Lou, X. W. (2015) · Nature Communications · doi:10.1038/ncomms9850 · Cited by 524
Wu, F., Chen, J., Chen, R., Wu, S., Li, L., Chen, S., & Zhao, T. (2011) · The Journal of Physical Chemistry C · doi:10.1021/jp1114724 · Cited by 520
Zhou, G., Wang, D.-W., Li, F., Hou, P.-X., Yin, L., Liu, C., Lu, G. Q. (., Gentle, I. R., & Cheng, H.-M. (2012) · Energy & Environmental Science · doi:10.1039/c2ee22294a · Cited by 518
Self-citationChung, S., & Manthiram, A. (2014) · Advanced Functional Materials · doi:10.1002/adfm.201400845 · Cited by 516
Improved cycling performances of lithium sulfur batteries with LiNO3-modified electrolyte
Liang, X. M., Wen, Z., Liu, Y., Wu, M., Jin, J. H., Zhang, H., & Wu, X. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.08.027 · Cited by 506
Zhou, G., Zhao, Y., & Manthiram, A. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201402263 · Cited by 502
Anodes for Rechargeable Lithium‐Sulfur Batteries
Cao, R., Xu, W., Lv, D., Xiao, J., & Zhang, J. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201402273 · Cited by 502
Structural Design of Cathodes for Li‐S Batteries
Pope, M. A., & Aksay, I. A. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201500124 · Cited by 500
Yin, L., Wang, J., Lin, F., Yang, J., & Nuli, Y. (2012) · Energy & Environmental Science · doi:10.1039/c2ee03495f · Cited by 484
Li, Z., Yuan, L., Yi, Z., Sun, Y., Liu, Y., Jiang, Y., Shen, Y., Xin, Y., Zhang, Z., & Huang, Y. (2014) · Advanced Energy Materials · doi:10.1002/aenm.201301473 · Cited by 481
Tailoring Porosity in Carbon Nanospheres for Lithium–Sulfur Battery Cathodes
He, G., Evers, S., Liang, X., Cuisinier, M., Garsuch, A., & Nazar, L. F. (2013) · ACS Nano · doi:10.1021/nn404439r · Cited by 475
Optimization of mesoporous carbon structures for lithium–sulfur battery applications
Li, X., Cao, Y., Qi, W., Saraf, L. V., Xiao, J., Nie, Z., Mietek, J., Zhang, J.-G., Schwenzer, B., & Liu, J. (2011) · Journal of Materials Chemistry · doi:10.1039/c1jm12979a · Cited by 454
Evers, S., & Nazar, L. F. (2011) · Chemical Communications · doi:10.1039/c2cc16726c · Cited by 441
A High‐Performance Polymer Tin Sulfur Lithium Ion Battery
Hassoun, J., & Scrosati, B. (2010) · Angewandte Chemie International Edition · doi:10.1002/anie.200907324 · Cited by 433
A graphene-like metallic cathode host for long-life and high-loading lithium–sulfur batteries
Pang, Q., Kundu, D., & Nazar, L. F. (2016) · Materials Horizons · doi:10.1039/c5mh00246j · Cited by 424
Zhang, J., Yang, C., Yin, Y., Wan, L., & Guo, Y. (2016) · Advanced Materials · doi:10.1002/adma.201602913 · Cited by 418
Carbon Materials for Lithium Sulfur Batteries—Ten Critical Questions
Borchardt, L., Oschatz, M., & Kaskel, S. (2016) · Chemistry – A European Journal · doi:10.1002/chem.201600040 · Cited by 414
Pang, Q., & Nazar, L. F. (2016) · ACS Nano · doi:10.1021/acsnano.5b07347 · Cited by 411
Progress Towards Commercially Viable Li–S Battery Cells
Urbonaite, S., Poux, T., & Novák, P. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201500118 · Cited by 406
Cheng, X.-B., Huang, J.-Q., Zhang, Q., Peng, H.-J., Zhao, M.-Q., & Wei, F. (2014) · Nano Energy · doi:10.1016/j.nanoen.2013.12.013 · Cited by 403
Chen, R., Zhao, T., Lu, J., Wu, F., Li, L., Chen, J., Tan, G., Ye, Y., & Amine, K. (2013) · Nano Letters · doi:10.1021/nl4016683 · Cited by 401
Improving battery safety by early detection of internal shorting with a bifunctional separator
Wu, H., Zhuo, D., Kong, D., & Cui, Y. (2014) · Nature Communications · doi:10.1038/ncomms6193 · Cited by 400
Yao, H., Zheng, G., Hsu, P.-C., Kong, D., Cha, J. J., Li, W., Seh, Z. W., McDowell, M. T., Yan, K., Liang, Z., et al. (2014) · Nature Communications · doi:10.1038/ncomms4943 · Cited by 398
Yang, X., Zhang, L., Zhang, F., Huang, Y., & Chen, Y. (2014) · ACS Nano · doi:10.1021/nn501284q · Cited by 396
Cheng, X.-B., Yan, C., Huang, J.-Q., Li, P., Zhu, L., Zhao, L., Zhang, Y., Zhu, W., Yang, S.-T., & Zhang, Q. (2017) · Energy Storage Materials · doi:10.1016/j.ensm.2016.09.003 · Cited by 394
Tang, C., Li, B., Zhang, Q., Zhu, L., Wang, H., Shi, J., & Wei, F. (2016) · Advanced Functional Materials · doi:10.1002/adfm.201503726 · Cited by 388
Sulfur-graphene composite for rechargeable lithium batteries
Wang, J.-Z., Lu, L., Choucair, M., Stride, J. A., Xu, X., & Liu, H.-K. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2010.09.106 · Cited by 380
Li, W., Zheng, G., Yang, Y., Seh, Z. W., Liu, N., & Cui, Y. (2013) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1220992110 · Cited by 379
Lithium Superionic Sulfide Cathode for All-Solid Lithium–Sulfur Batteries
Lin, Z., Liu, Z., Dudney, N. J., & Liang, C. (2013) · ACS Nano · doi:10.1021/nn400391h · Cited by 378
Wang, J., Chew, S. Y., Zhao, Z. W., Ashraf, S., Wexler, D., Chen, J., Ng, S. H., Chou, S. L., & Liu, H. K. (2008) · Carbon · doi:10.1016/j.carbon.2007.11.007 · Cited by 371
In Situ Reactive Assembly of Scalable Core–Shell Sulfur–MnO2 Composite Cathodes
Liang, X. M., & Nazar, L. F. (2016) · ACS Nano · doi:10.1021/acsnano.5b07458 · Cited by 371
Yuan, L., Yuan, H., Qiu, X., Chen, L., & Zhu, W. (2009) · Journal of Power Sources · doi:10.1016/j.jpowsour.2008.12.149 · Cited by 369
Tao, Y., Wei, Y., Liu, Y., Wang, J., Qiao, W., Ling, L., & Long, D. (2016) · Energy & Environmental Science · doi:10.1039/c6ee01662f · Cited by 362
Wang, X., Li, G., Li, J., Zhang, Y., Wook, A., Yu, A., & Chen, Z. (2016) · Energy & Environmental Science · doi:10.1039/c6ee00194g · Cited by 360
Sandwich-type functionalized graphene sheet-sulfur nanocomposite for rechargeable lithium batteries
Cao, Y., Li, X., Aksay, I. A., Lemmon, J., Nie, Z., Yang, Z., & Liu, J. (2011) · Physical Chemistry Chemical Physics · doi:10.1039/c0cp02477e · Cited by 356
Encapsulated Monoclinic Sulfur for Stable Cycling of Li–S Rechargeable Batteries
Moon, S., Jung, Y. H., Jung, W. K., Jung, D. S., Choi, J. W., & Kim, D. K. (2013) · Advanced Materials · doi:10.1002/adma.201303166 · Cited by 354
Wei, S., Zhang, H., Huang, Y., Wang, W., Xia, Y., & Yu, Z. (2011) · Energy & Environmental Science · doi:10.1039/c0ee00505c · Cited by 350
Chen, S.-R., Zhai, Y.-P., Xu, G.-L., Jiang, Y.-X., Zhao, D.-Y., Li, J.-T., Huang, L., & Sun, S.-G. (2011) · Electrochimica Acta · doi:10.1016/j.electacta.2011.03.005 · Cited by 346
Yu, M., Ma, J., Song, H., Wang, A., Tian, F., Wang, Y., Qiu, H., & Wang, R. (2016) · Energy & Environmental Science · doi:10.1039/c5ee03902a · Cited by 345
Enhanced Li–S Batteries Using Amine-Functionalized Carbon Nanotubes in the Cathode
Ma, L., Zhuang, H. L., Wei, S., Hendrickson, K. E., Kim, M. S., Cohn, G., Hennig, R. G., & Archer, L. A. (2016) · ACS Nano · doi:10.1021/acsnano.5b06373 · Cited by 345
A Graphene Foam Electrode with High Sulfur Loading for Flexible and High-Energy Li–S Batteries
Zhou, G. (2017) · Springer Theses · doi:10.1007/978-981-10-3406-0_6 · Cited by 344
Manipulating surface reactions in lithium–sulphur batteries using hybrid anode structures
Huang, C., Xiao, J., Shao, Y., Zheng, J., Bennett, W. D., Lu, D., Saraf, L. V., Engelhard, M., Ji, L., Zhang, J., et al. (2014) · Nature Communications · doi:10.1038/ncomms4015 · Cited by 343
Sulfur‐Based Composite Cathode Materials for High‐Energy Rechargeable Lithium Batteries
Wang, J., He, Y., & Yang, J. (2015) · Advanced Materials · doi:10.1002/adma.201402569 · Cited by 331
High-rate lithium–sulfur batteries promoted by reduced graphene oxide coating
Li, N., Zheng, M., Lu, H., Hu, Z., Shen, C., Chang, X., Ji, G., Cao, J., & Shi, Y. (2012) · Chemical Communications · doi:10.1039/c2cc17912a · Cited by 331
An Advanced Lithium‐Sulfur Battery
Kim, J., Lee, D. J., Jung, H., Sun, Y., Hassoun, J., & Scrosati, B. (2012) · Advanced Functional Materials · doi:10.1002/adfm.201200689 · Cited by 329
Li, Z., Yuan, L., Yi, Z., Liu, Y., Xin, Y., Zhang, Z., & Huang, Y. (2013) · ECS Meeting Abstracts · doi:10.1149/ma2013-02/2/42 · Cited by 322
Qie, L., Zu, C., & Manthiram, A. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201502459 · Cited by 321
Sulfur Cathodes with Hydrogen Reduced Titanium Dioxide Inverse Opal Structure
Liang, Z., Zheng, G., Li, W., Seh, Z. W., Yao, H., Yan, K., Kong, D., & Cui, Y. (2014) · ACS Nano · doi:10.1021/nn501308m · Cited by 313
Confined Sulfur in Microporous Carbon Renders Superior Cycling Stability in Li/S Batteries
Xu, Y., Wen, Y., Zhu, Y., Gaskell, K., Cychosz, K. A., Eichhorn, B., Xu, K., & Wang, C. (2015) · Advanced Functional Materials · doi:10.1002/adfm.201500983 · Cited by 311
Ding, Y., Kopold, P., Hahn, K., van Aken, P. A., Maier, J., & Yu, Y. (2016) · Advanced Functional Materials · doi:10.1002/adfm.201504294 · Cited by 310
Monodispersed Sulfur Nanoparticles for Lithium–Sulfur Batteries with Theoretical Performance
Chen, H., Wang, C., Dong, W., Lu, W., Du, Z., & Chen, L. (2015) · Nano Letters · doi:10.1021/nl504963e · Cited by 304
Dörfler, S., Hagen, M., Althues, H., Tübke, J., Kaskel, S., & Hoffmann, M. J. (2012) · Chemical Communications · doi:10.1039/c2cc17925c · Cited by 299
Zhang, S. S. (2012) · Journal of The Electrochemical Society · doi:10.1149/2.002207jes · Cited by 297
Wang, D.-W., Zhou, G., Li, F., Wu, K.-H., Lu, G. Q. (., Cheng, H.-M., & Gentle, I. R. (2012) · Physical Chemistry Chemical Physics · doi:10.1039/c2cp40808b · Cited by 296
Self-citationTowards systems materials engineering
Yang, P., & Tarascon, J.-M. (2012) · Nature Materials · doi:10.1038/nmat3367 · Cited by 295
Zhou, W., Wang, C., Zhang, Q., Abruña, H. D., He, Y., Wang, J., Mao, S. X., & Xiao, X. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201401752 · Cited by 292
A Facile Layer‐by‐Layer Approach for High‐Areal‐Capacity Sulfur Cathodes
Qie, L., & Manthiram, A. (2015) · Advanced Materials · doi:10.1002/adma.201405689 · Cited by 290
Sun, L., Li, M., Jiang, Y., Kong, W., Jiang, K., Wang, J., & Fan, S. (2014) · Nano Letters · doi:10.1021/nl501486n · Cited by 288
Chung, S., Han, P., Singhal, R., Kalra, V., & Manthiram, A. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201500738 · Cited by 280
Toward More Reliable Lithium–Sulfur Batteries: An All-Graphene Cathode Structure
Fang, R., Zhao, S., Pei, S., Qian, X., Hou, P.-X., Cheng, H.-M., Liu, C., & Li, F. (2016) · ACS Nano · doi:10.1021/acsnano.6b04019 · Cited by 280
Self-citationGraphene materials for lithium–sulfur batteries
Yu, M., Li, R., Wu, M., & Shi, G. (2015) · Energy Storage Materials · doi:10.1016/j.ensm.2015.08.004 · Cited by 268
Peng, H., Xu, W., Zhu, L., Wang, D., Huang, J., Cheng, X., Yuan, Z., Wei, F., & Zhang, Q. (2016) · Advanced Functional Materials · doi:10.1002/adfm.201602071 · Cited by 256
Self-citationWeng, W., Pol, V. G., & Amine, K. (2013) · Advanced Materials · doi:10.1002/adma.201204051 · Cited by 241
Chen, H., Dong, W., Ge, J., Wang, C., Wu, X., Lu, W., & Chen, L. (2013) · Scientific Reports · doi:10.1038/srep01910 · Cited by 233
Trapping lithium polysulfides of a Li–S battery by forming lithium bonds in a polymer matrix
Park, K., Cho, J. H., Jang, J.-H., Yu, B.-C., De La Hoz, A. T., Miller, K. M., Ellison, C. J., & Goodenough, J. B. (2015) · Energy & Environmental Science · doi:10.1039/c5ee01809a · Cited by 222
Copper‐Stabilized Sulfur‐Microporous Carbon Cathodes for Li–S Batteries
Zheng, S., Yi, F., Li, Z., Zhu, Y., Xu, Y., Luo, C., Yang, J., & Wang, C. (2014) · Advanced Functional Materials · doi:10.1002/adfm.201304156 · Cited by 217
Jin, S., Xin, S., Wang, L., Du, Z., Cao, L., Chen, J., Kong, X., Gong, M., Lu, J., Zhu, Y., et al. (2016) · Advanced Materials · doi:10.1002/adma.201602704 · Cited by 216
Qu, Y., Zhang, Z., Zhang, X., Ren, G., Lai, Y., Liu, Y., & Li, J. (2015) · Carbon · doi:10.1016/j.carbon.2014.12.001 · Cited by 213
Miao, L., Wang, W., Yuan, K., et al. (2014) · Chemical Communications · doi:10.1039/c4cc03410d · Cited by 194
Chang, C.-H., Chung, S.-H., & Manthiram, A. (2016) · Small · doi:10.1002/smll.201502505 · Cited by 194
Papandrea, B., Xu, X., Xu, Y., Chen, C.-Y., Lin, Z., Wang, G., Luo, Y., Liu, M., Huang, Y., Mai, L., et al. (2016) · Nano Research · doi:10.1007/s12274-016-1005-1 · Cited by 190
Zhu, L., Peng, H.-J., Liang, J., Huang, J.-Q., Chen, C.-M., Guo, X., Zhu, W., Li, P., & Zhang, Q. (2015) · Nano Energy · doi:10.1016/j.nanoen.2014.11.062 · Cited by 184
Carbon‐Based Anodes for Lithium Sulfur Full Cells with High Cycle Stability
Brückner, J., Thieme, S., Böttger‐Hiller, F., Bauer, I., Grossmann, H. T., Strubel, P., Althues, H., Spange, S., & Kaskel, S. (2014) · Advanced Functional Materials · doi:10.1002/adfm.201302169 · Cited by 184
Rong, J., Ge, M., Fang, X., & Zhou, C. (2013) · Nano Letters · doi:10.1021/nl403404v · Cited by 175
3D Hyperbranched Hollow Carbon Nanorod Architectures for High‐Performance Lithium‐Sulfur Batteries
Chen, S., Huang, X., Liu, H., Sun, B., Yeoh, W., Li, K., Zhang, J., & Wang, G. (2014) · Advanced Energy Materials · doi:10.1002/aenm.201301761 · Cited by 174
Zheng, Z., Guo, H., Pei, F., Zhang, X., Chen, X., Fang, X., Wang, T., & Zheng, N. (2016) · Advanced Functional Materials · doi:10.1002/adfm.201601897 · Cited by 171
Ponraj, R., Kannan, A. G., Ahn, J. H., & Kim, D.-W. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b11327 · Cited by 168
Shaibani, M., Akbari, A., Sheath, P., Easton, C. D., Banerjee, P. C., Konstas, K., Fakhfouri, A., Barghamadi, M., Musameh, M. M., Best, A. S., et al. (2016) · ACS Nano · doi:10.1021/acsnano.6b03285 · Cited by 163
Enhanced Performance of a Lithium–Sulfur Battery Using a Carbonate‐Based Electrolyte
Xu, Z., Wang, J., Yang, J., Miao, X., Chen, R., Qian, J., & Miao, R. (2016) · Angewandte Chemie International Edition · doi:10.1002/anie.201605931 · Cited by 159
Li, H., Yang, X., Wang, X., Liu, M., Ye, F., Wang, J., Qiu, Y., Li, W., & Zhang, Y. (2015) · Nano Energy · doi:10.1016/j.nanoen.2015.01.007 · Cited by 152
Wu, F., Kim, H., Magasinski, A., Lee, J. T., Lin, H., & Yushin, G. N. (2014) · Advanced Energy Materials · doi:10.1002/aenm.201400196 · Cited by 151
A high sulfur content composite with core–shell structure as cathode material for Li–S batteries
Miao, L., Wang, W., Wang, A., et al. (2013) · Journal of Materials Chemistry A · doi:10.1039/c3ta12079a · Cited by 143
Ye, J., He, F., Nie, J., Cao, Y., Yang, H., & Ai, X. (2015) · Journal of Materials Chemistry A · doi:10.1039/c4ta06976e · Cited by 143
Niu, S., Lv, W. Z., Zhang, C., Shi, Y., Zhao, J., Li, B., Yang, Q., & Kang, F. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.06.122 · Cited by 142
Yang, J., Chen, F., Li, C., Bai, T., Long, B., & Zhou, X. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta06250d · Cited by 142
A core–shell electrode for dynamically and statically stable Li–S battery chemistry
Chung, S., Chang, C., & Manthiram, A. (2016) · Energy & Environmental Science · doi:10.1039/c6ee01280a · Cited by 139
Shi, J., Tang, C., Peng, H., Zhu, L. Z., Cheng, X., Huang, J., Zhu, W., & Zhang, Q. (2015) · Small · doi:10.1002/smll.201501467 · Cited by 138
Chung, S., & Manthiram, A. (2014) · ChemSusChem · doi:10.1002/cssc.201301287 · Cited by 137
A Sulfur Cathode with Pomegranate‐Like Cluster Structure
Li, W., Liang, Z., Lu, Z., Yao, H., Seh, Z. W., Yan, K., Zheng, G. W., & Cui, Y. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201500211 · Cited by 131
Oschmann, B., Park, J., Kim, C., et al. (2015) · Chemistry of Materials · doi:10.1021/acs.chemmater.5b02317 · Cited by 126
Niu, S., Zhou, G., Lv, W. Z., Shi, H., Luo, C., He, Y., Li, B., Yang, Q., & Kang, F. (2016) · Carbon · doi:10.1016/j.carbon.2016.07.062 · Cited by 124
A Hierarchical Particle–Shell Architecture for Long‐Term Cycle Stability of Li2S Cathodes
Wu, F., Lee, J. T., Fan, F., Nitta, N., Kim, H., Zhu, T., & Yushin, G. N. (2015) · Advanced Materials · doi:10.1002/adma.201502289 · Cited by 123
Leaf‐Like Graphene‐Oxide‐Wrapped Sulfur for High‐Performance Lithium–Sulfur Battery
Yuan, S., Guo, Z., Wang, L., Hu, S., Wang, Y., & Xia, Y. (2015) · Advanced Science · doi:10.1002/advs.201500071 · Cited by 120
A lithium sulfur battery with high power density
Nagata, H., & Chikusa, Y. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.04.106 · Cited by 107
Dong, Y., Liu, S., Wang, Z., Liu, Y., Zhao, Z., & Qiu, J. (2015) · Nanoscale · doi:10.1039/c5nr01015b · Cited by 107
Ma, J., Fang, Z., Yan, Y. G., Yang, Z., Gu, L., Hu, Y., Li, H., Wang, Z., & Huang, X. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201500046 · Cited by 104
Zhou, Y., Zhou, C., Li, Q., et al. (2015) · Advanced Materials · doi:10.1002/adma.201501082 · Cited by 101
Hou, Y., Li, J., Gao, X., Wen, Z., Yuan, C. Y., & Chen, J. (2016) · Nanoscale · doi:10.1039/c5nr09037g · Cited by 100
A high-density graphene–sulfur assembly: a promising cathode for compact Li–S batteries
Zhang, C., Liu, D.-H., Lv, W. Z., Wang, D., Wei, W., Zhou, G., Wang, S., Li, F., Li, B., Kang, F., et al. (2015) · Nanoscale · doi:10.1039/c4nr06863g · Cited by 95
Self-citationZeng, F., Jin, Z., Yuan, K., Liu, S., Cheng, X., Wang, A., Wang, W., & Yang, Y. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta02680j · Cited by 93
Li, Y., Ye, D., Liu, W., Shi, B., Guo, R., Zhao, H., Pei, H., Xu, J., & Xie, J. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b04270 · Cited by 91
Shi, J., Peng, H., Zhu, L. Z., Zhu, W., & Zhang, Q. (2015) · Carbon · doi:10.1016/j.carbon.2015.03.031 · Cited by 89
Shan, J., Liu, Y., Su, Y., Liu, P., Zhuang, X., Wu, D., Zhang, F., & Feng, X. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta08109b · Cited by 87
He, G., Mandlmeier, B., Schuster, J., Nazar, L. F., & Bein, T. (2014) · Chemistry of Materials · doi:10.1021/cm403740r · Cited by 85
Krause, A., Dörfler, S., Piwko, M., Wisser, F. M., Jaumann, T., Ahrens, E., Giebeler, L., Althues, H., Schädlich, S., Grothe, J., et al. (2016) · Scientific Reports · doi:10.1038/srep27982 · Cited by 85
Yan, J., Liu, X., He, Q., Li, W., Zhou, Y., Yao, M., & Li, B. (2015) · Chemistry of Materials · doi:10.1021/acs.chemmater.5b02533 · Cited by 83
Schipper, F., Vižintin, A., Ren, J., Dominko, R., & Fellinger, T. (2015) · ChemSusChem · doi:10.1002/cssc.201500832 · Cited by 81
Zhang, Y., Zhao, Y. H., Bakenov, Z., Babaa, M., Konarov, A., Ding, C., & Chen, P. (2013) · Journal of The Electrochemical Society · doi:10.1149/2.068308jes · Cited by 71
Long-Life, High-Efficiency Lithium–Sulfur Battery from a Nanoassembled Cathode
Yan, J., Liu, X., Yao, M., Wang, X., Wafle, T. K., & Li, B. (2015) · Chemistry of Materials · doi:10.1021/acs.chemmater.5b01780 · Cited by 66
Fang, R., Zhao, S., Pei, S., Cheng, Y., Hou, P., Liu, M., Cheng, H., Liu, C., & Li, F. (2016) · Carbon · doi:10.1016/j.carbon.2016.08.050 · Cited by 58
Self-citationFunctionalized Graphene‐Based Cathode for Highly Reversible Lithium–Sulfur Batteries
Kim, J. W., Ocon, J. D., Park, D., & Lee, J. (2014) · ChemSusChem · doi:10.1002/cssc.201300782 · Cited by 57
Improved Cycling Stability of Lithium Electrodes in Rechargeable Lithium Batteries
Kang, I. S., Lee, Y.-S., & Kim, D. (2013) · Journal of The Electrochemical Society · doi:10.1149/2.029401jes · Cited by 54
Cited by
Toward Safe Lithium Metal Anode in Rechargeable Batteries: A Review
Cheng, X.-B., Zhang, R., Zhao, C.-Z., & Zhang, Q. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00115 · Cited by 6,197
Pathways for practical high-energy long-cycling lithium metal batteries
Liu, J., Bao, Z., Cui, Y., Dufek, E. J., Goodenough, J. B., Khalifah, P., Li, Q., Liaw, B. Y., Liu, P., Manthiram, A., et al. (2019) · Nature Energy · doi:10.1038/s41560-019-0338-x · Cited by 3,412
Bulk COFs and COF nanosheets for electrochemical energy storage and conversion
Li, J., Jing, X., Li, Q., Li, S., Gao, X., Feng, X., & Wang, B. (2020) · Chemical Society Reviews · doi:10.1039/d0cs00017e · Cited by 1,152
Study of energy storage systems and environmental challenges of batteries
Dehghani-Sanij, A. R., Tharumalingam, E., Dusseault, M. B., & Fraser, R. (2019) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2019.01.023 · Cited by 872
Advances in Lithium–Sulfur Batteries: From Academic Research to Commercial Viability
Chen, Y., Wang, T., Tian, H., Su, D., Zhang, Q., & Wang, G. (2021) · Advanced Materials · doi:10.1002/adma.202003666 · Cited by 870
Metadata
- Authors
- Fang, R., Zhao, S., Sun, Z., Wang, D., Cheng, H., & Li, F.
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2017-04-05
- Volume
- 29
- Issue
- 48
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W2604862259
- Cited by
- 1,785
- References
- 205
- FWCI
- 86.59
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.