The DOI matches its Crossref record; 154 of the 154 references it cites were found in a registry or an index.
4D printing and stimuli-responsive materials in biomedical aspects
Open accessAbstract
Three-dimensional (3D) printing has revolutionized the world manufacturing production. In biomedical applications, however, 3D printed constructs fell short of expectations mainly due to their inability to adequately mimic the dynamic human tissues. To date, most of the 3D printed biomedical structures are largely static and inanimate as they lack the time-dependant dimension. To adequately address the dynamic healing and regeneration process of human tissues, 4D printing emerges as an important development where "time" is incorporated into the conventional concept of 3D printing as the fourth dimension. As such, additive manufacturing (AM) evolves from 3D to 4D printing and in the process putting stimulus-responsive materials in the limelight. In this review, the state-of-the-art efforts in integrating the time-dependent behaviour of stimulus-responsive materials in 4D printing will be discussed. In addition, current literatures on the interactions between various types of stimuli (categorized under physical, chemical and biological signals) with the associated stimulus-responsive materials will be the major focus in this review. Lastly, potential usage of 4D printing in biomedical applications will also be discussed, followed by technical considerations as well as outlook for future discoveries. STATEMENT OF SIGNIFICANCE: In this Review, we have demonstrated the significance of 4D printing in biomedical applications, in which "time" has been incorporated into the conventional concept of 3D printing as the 4th dimension. As such, 4D printing differentiates and evolves from 3D printing using stimulus-responsive materials which can actively respond to external stimuli and more sophisticated "hardware"-printer which can achieve multi-printing via mathematical-predicted designs that are programmed to consider the transformation of 3D constructs over time. The emphasize will be on the interactions between various types of stimuli (categorized under physical, chemical and biological signals) with the associated stimulus-responsive materials, followed by technical considerations as well as outlook for future discoveries.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Sydney Gladman, A., Matsumoto, E. A., Nuzzo, R. G., Mahadevan, L., & Lewis, J. A. (2016) · Nature Materials · doi:10.1038/nmat4544 · Cited by 3,027
Mechanotransduction Across the Cell Surface and Through the Cytoskeleton
Wang, N., Butler, J. P., & Ingber, D. E. (1993) · Science · doi:10.1126/science.7684161 · Cited by 3,003
The design of scaffolds for use in tissue engineering. Part I. Traditional factors
Yang, S., Leong, K.-F., Du, Z., & Chua, C.-K. (2001) · Tissue Engineering · doi:10.1089/107632701753337645 · Cited by 2,234
Proceedings of the 2017 CHI Conference on Human Factors in Computing Systems
(2017) · doi:10.1145/3025453 · Cited by 2,207
Printing ferromagnetic domains for untethered fast-transforming soft materials
Kim, Y., Yuk, H., Zhao, R., Chester, S. A., & Zhao, X. (2018) · Nature · doi:10.1038/s41586-018-0185-0 · Cited by 2,183
Controlled drug delivery vehicles for cancer treatment and their performance
Senapati, S., Mahanta, A. K., Kumar, S., & Maiti, P. (2018) · Signal Transduction and Targeted Therapy · doi:10.1038/s41392-017-0004-3 · Cited by 2,167
3D printing based on imaging data: review of medical applications
Rengier, F., Mehndiratta, A., von Tengg-Kobligk, H., Zechmann, C. M., Unterhinninghofen, R., Kauczor, H.-U., & Giesel, F. L. (2010) · International Journal of Computer Assisted Radiology and Surgery · doi:10.1007/s11548-010-0476-x · Cited by 1,584
Continuous glucose monitoring and intensive treatment of type 1 diabetes
(2008) · New England Journal of Medicine · doi:10.1056/nejmoa0805017 · Cited by 1,559
Future perspectives and recent advances in stimuli-responsive materials
Roy, D., Cambre, J. N., & Sumerlin, B. S. (2010) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2009.10.008 · Cited by 1,474
Lu, Y., Aimetti, A. A., Langer, R., & Gu, Z. (2016) · Nature Reviews Materials · doi:10.1038/natrevmats.2016.75 · Cited by 1,421
Thermoresponsive hydrogels in biomedical applications
Klouda, L., & Mikos, A. G. (2008) · European Journal of Pharmaceutics and Biopharmaceutics · doi:10.1016/j.ejpb.2007.02.025 · Cited by 1,349
A review of trends and limitations in hydrogel-rapid prototyping for tissue engineering
Billiet, T., Vandenhaute, M., Schelfhout, J., Van Vlierberghe, S., & Dubruel, P. (2012) · Biomaterials · doi:10.1016/j.biomaterials.2012.04.050 · Cited by 1,284
Disruptive technologies: Advances that will transform life, business, and the global economy
Manyika, J., Chui, M., Bughin, J., Dobbs, R., Bisson, P., & Marrs, A. (2013) · Cited by 1,237
4D Printing: Multi‐Material Shape Change
Tibbits, S. (2014) · Architectural Design · doi:10.1002/ad.1710 · Cited by 1,188
Momeni, F., M.Mehdi Hassani.N, S., Liu, X., & Ni, J. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.02.068 · Cited by 1,165
Potential toxicity of superparamagnetic iron oxide nanoparticles (SPION)
Singh, N., Jenkins, G. J. S., Asadi, R., & Doak, S. H. (2010) · Nano Reviews · doi:10.3402/nano.v1i0.5358 · Cited by 1,112
Stimulus-responsive shape memory materials: a review
Sun, L., Huang, W. M., Ding, Z., Zhao, Y., Wang, C. C., Purnawali, H., & Tang, C. (2012) · Materials & Design · doi:10.1016/j.matdes.2011.04.065 · Cited by 1,105
Controlling Cell Behavior Electrically: Current Views and Future Potential
McCaig, C. D., Rajnicek, A. M., Song, B., & Zhao, M. (2005) · Physiological Reviews · doi:10.1152/physrev.00020.2004 · Cited by 1,096
Hydrogels for Biomedical Applications: Their Characteristics and the Mechanisms behind Them
Chai, Q., Jiao, Y., & Yu, X. (2017) · Gels · doi:10.3390/gels3010006 · Cited by 1,072
Temperature- and light-responsive smart polymer materials
Jochum, F. D., & Theato, P. (2013) · Chem. Soc. Rev. · doi:10.1039/c2cs35191a · Cited by 1,062
Fabricated: The New World of 3D Printing
Lipson, H., & Kurman, M. (2013) · Cited by 1,032
3D bioprinting for biomedical devices and tissue engineering: A review of recent trends and advances
Derakhshanfar, S., Mbeleck, R., Xu, K., Zhang, X., Zhong, W., & Xing, M. (2018) · Bioactive Materials · doi:10.1016/j.bioactmat.2017.11.008 · Cited by 1,027
Hypercalcemia Associated with Cancer
Stewart, A. F. (2005) · New England Journal of Medicine · doi:10.1056/nejmcp042806 · Cited by 973
Saburi, T. (2000) · Materials Science Forum · doi:10.4028/b-buy1cx · Cited by 914
3D printing of smart materials: A review on recent progresses in 4D printing
Khoo, Z. X., Teoh, J. E. M., Liu, Y., Chua, C. K., Yang, S., An, J., Leong, K. F., & Yeong, W. Y. (2015) · Virtual and Physical Prototyping · doi:10.1080/17452759.2015.1097054 · Cited by 912
Brief Electrical Stimulation Promotes the Speed and Accuracy of Motor Axonal Regeneration
Al-Majed, A. A., Neumann, C. M., Brushart, T. M., & Gordon, T. (2000) · The Journal of Neuroscience · doi:10.1523/jneurosci.20-07-02602.2000 · Cited by 849
Yu, J., Zhang, Y., Ye, Y., DiSanto, R., Sun, W., Ranson, D., Ligler, F. S., Buse, J. B., & Gu, Z. (2015) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1505405112 · Cited by 848
Otsuka, K. (1999) · Cited by 841
Human Body Composition: In Vivo Methods
Ellis, K. J. (2000) · Physiological Reviews · doi:10.1152/physrev.2000.80.2.649 · Cited by 825
Hayashi, T., Hirshman, M. F., Kurth, E. J., Winder, W. W., & Goodyear, L. J. (1998) · Diabetes · doi:10.2337/diab.47.8.1369 · Cited by 775
Hayashi, T., Hirshman, M. F., Kurth, E. J., Winder, W. W., & Goodyear, L. J. (1998) · Diabetes · doi:10.2337/diabetes.47.8.1369 · Cited by 774
Magnetic nanoparticles for gene and drug delivery
Dobson (2008) · International Journal of Nanomedicine · doi:10.2147/ijn.s1608 · Cited by 755
Balance between swelling pressure and collagen tension in normal and degenerate cartilage
MAROUDAS, A. (1976) · Nature · doi:10.1038/260808a0 · Cited by 726
Design and Fabrication of Human Skin by Three-Dimensional Bioprinting
Lee, V., Singh, G., Trasatti, J. P., Bjornsson, C., Xu, X., Tran, T. N., Yoo, S.-S., Dai, G., & Karande, P. (2014) · Tissue Engineering Part C: Methods · doi:10.1089/ten.tec.2013.0335 · Cited by 725
Electrical conductivity of tissue at frequencies below 1 MHz
Gabriel, C., Peyman, A., & Grant, E. H. (2009) · Physics in Medicine and Biology · doi:10.1088/0031-9155/54/16/002 · Cited by 716
4D Bioprinting for Biomedical Applications
Gao, B., Yang, Q., Zhao, X., Jin, G., Ma, Y., & Xu, F. (2016) · Trends in Biotechnology · doi:10.1016/j.tibtech.2016.03.004 · Cited by 711
Jakus, A. E., Secor, E. B., Rutz, A. L., Jordan, S. W., Hersam, M. C., & Shah, R. N. (2015) · ACS Nano · doi:10.1021/acsnano.5b01179 · Cited by 710
pH-Responsive polymers: synthesis, properties and applications
Dai, S., Ravi, P., & Tam, K. C. (2008) · Soft Matter · doi:10.1039/b714741d · Cited by 693
Hydrogel-based actuators: possibilities and limitations
Ionov, L. (2014) · Materials Today · doi:10.1016/j.mattod.2014.07.002 · Cited by 680
Enzyme-responsive nanomaterials for controlled drug delivery
Hu, Q., Katti, P. S., & Gu, Z. (2014) · Nanoscale · doi:10.1039/c4nr04249b · Cited by 668
A Tissue-Like Printed Material
Villar, G., Graham, A. D., & Bayley, H. (2013) · Science · doi:10.1126/science.1229495 · Cited by 613
Broad-wavelength-range chemically tunable block-copolymer photonic gels
Kang, Y., Walish, J. J., Gorishnyy, T., & Thomas, E. L. (2007) · Nature Materials · doi:10.1038/nmat2032 · Cited by 609
Building Collagen Molecules, Fibrils, and Suprafibrillar Structures
Hulmes, D. J. S. (2002) · Journal of Structural Biology · doi:10.1006/jsbi.2002.4450 · Cited by 591
Wang, C., Wang, J., Zhang, X., Yu, S., Wen, D., Hu, Q., Ye, Y., Bomba, H., Hu, X., Liu, Z., et al. (2018) · Science Translational Medicine · doi:10.1126/scitranslmed.aan3682 · Cited by 591
Active printed materials for complex self-evolving deformations
Raviv, D., Zhao, W., McKnelly, C., Papadopoulou, A., Kadambi, A., Shi, B., Hirsch, S., Dikovsky, D., Zyracki, M., Olguin, C., et al. (2014) · Scientific Reports · doi:10.1038/srep07422 · Cited by 568
Mechanical properties and shape memory effect of 3D-printed PLA-based porous scaffolds
Senatov, F. S., Niaza, K. V., Zadorozhnyy, M. Y., Maksimkin, A. V., Kaloshkin, S. D., & Estrin, Y. Z. (2016) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2015.11.036 · Cited by 547
Vedadghavami, A., Minooei, F., Mohammadi, M. H., Khetani, S., Rezaei Kolahchi, A., Mashayekhan, S., & Sanati-Nezhad, A. (2017) · Acta Biomaterialia · doi:10.1016/j.actbio.2017.07.028 · Cited by 540
Yang, H., Yuan, B., Zhang, X., & Scherman, O. A. (2014) · Accounts of Chemical Research · doi:10.1021/ar500105t · Cited by 525
Light‐sensitive Intelligent Drug Delivery Systems†
Alvarez‐Lorenzo, C., Bromberg, L., & Concheiro, A. (2009) · Photochemistry and Photobiology · doi:10.1111/j.1751-1097.2008.00530.x · Cited by 519
Sequential Self-Folding Structures by 3D Printed Digital Shape Memory Polymers
Mao, Y., Yu, K., Isakov, M. S., Wu, J., Dunn, M. L., & Jerry Qi, H. (2015) · Scientific Reports · doi:10.1038/srep13616 · Cited by 510
Wei, H., Zhang, Q., Yao, Y., Liu, L., Liu, Y., & Leng, J. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b12824 · Cited by 504
Mechanotransduction: All Signals Point to Cytoskeleton, Matrix, and Integrins
Alenghat, F. J., & Ingber, D. E. (2002) · Science's STKE · doi:10.1126/stke.2002.119.pe6 · Cited by 494
Yeh, H.-C., Brown, T. T., Maruthur, N., Ranasinghe, P., Berger, Z., Suh, Y. D., Wilson, L. M., Haberl, E. B., Brick, J., Bass, E. B., et al. (2012) · Annals of Internal Medicine · doi:10.7326/0003-4819-157-5-201209040-00508 · Cited by 493
Ultrafast Digital Printing toward 4D Shape Changing Materials
Huang, L., Jiang, R., Wu, J., Song, J., Bai, H., Li, B., Zhao, Q., & Xie, T. (2017) · Advanced Materials · doi:10.1002/adma.201605390 · Cited by 490
3D Printed Photoresponsive Devices Based on Shape Memory Composites
Yang, H., Leow, W. R., Wang, T., Wang, J., Yu, J., He, K., Qi, D., Wan, C., & Chen, X. (2017) · Advanced Materials · doi:10.1002/adma.201701627 · Cited by 483
Lutz, J.-F., Weichenhan, K., Akdemir, Ö., & Hoth, A. (2007) · Macromolecules · doi:10.1021/ma062925q · Cited by 470
Three-dimensionally printed biological machines powered by skeletal muscle
Cvetkovic, C., Raman, R., Chan, V., Williams, B. J., Tolish, M., Bajaj, P., Sakar, M. S., Asada, H. H., Saif, M. T. A., & Bashir, R. (2014) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1401577111 · Cited by 443
Origami-inspired active structures: a synthesis and review
Peraza-Hernandez, E. A., Hartl, D. J., Malak Jr, R. J., & Lagoudas, D. C. (2014) · Smart Materials and Structures · doi:10.1088/0964-1726/23/9/094001 · Cited by 421
4D Printing of Shape Memory‐Based Personalized Endoluminal Medical Devices
Zarek, M., Mansour, N., Shapira, S., & Cohn, D. (2017) · Macromolecular Rapid Communications · doi:10.1002/marc.201600628 · Cited by 419
Oral delivery of insulin using pH‐responsive complexation gels
Lowman, A. M., Morishita, M., Kajita, M., Nagai, T., & Peppas, N. A. (1999) · Journal of Pharmaceutical Sciences · doi:10.1021/js980337n · Cited by 406
Joe Lopes, A., MacDonald, E., & Wicker, R. B. (2012) · Rapid Prototyping Journal · doi:10.1108/13552541211212113 · Cited by 399
Thermomechanical Constitutive Modeling in Shape Memory Polymer of Polyurethane Series
Tobushi, H., Hashimoto, T., Hayashi, S., & Yamada, E. (1997) · Journal of Intelligent Material Systems and Structures · doi:10.1177/1045389x9700800808 · Cited by 395
An Advanced Multifunctional Hydrogel‐Based Dressing for Wound Monitoring and Drug Delivery
Mirani, B., Pagan, E., Currie, B., Siddiqui, M. A., Hosseinzadeh, R., Mostafalu, P., Zhang, Y. S., Ghahary, A., & Akbari, M. (2017) · Advanced Healthcare Materials · doi:10.1002/adhm.201700718 · Cited by 387
3D Printed Enzymatically Biodegradable Soft Helical Microswimmers
Wang, X., Qin, X., Hu, C., Terzopoulou, A., Chen, X., Huang, T., Maniura‐Weber, K., Pané, S., & Nelson, B. J. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201804107 · Cited by 371
Additive Manufacturing Technologies – Rapid Prototyping to Direct Digital Manufacturing
Mueller, B. (2012) · Assembly Automation · doi:10.1108/aa.2012.03332baa.010 · Cited by 359
Goyanes, A., Fina, F., Martorana, A., Sedough, D., Gaisford, S., & Basit, A. W. (2017) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2017.05.021 · Cited by 355
Self-folding all-polymer thermoresponsive microcapsules
Stoychev, G., Puretskiy, N., & Ionov, L. (2011) · Soft Matter · doi:10.1039/c1sm05109a · Cited by 348
Multiple Shape Transformations of Composite Hydrogel Sheets
Thérien-Aubin, H., Wu, Z. L., Nie, Z., & Kumacheva, E. (2013) · Journal of the American Chemical Society · doi:10.1021/ja400518c · Cited by 345
Davis, G. E. (1992) · Biochemical and Biophysical Research Communications · doi:10.1016/0006-291x(92)91834-d · Cited by 337
Biocompatibility and Toxicity of Magnetic Nanoparticles in Regenerative Medicine
Markides, H., Rotherham, M., & El Haj, A. J. (2012) · Journal of Nanomaterials · doi:10.1155/2012/614094 · Cited by 332
“2D or not 2D”: Shape-programming polymer sheets
Liu, Y., Genzer, J., & Dickey, M. D. (2016) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2015.09.001 · Cited by 329
Biomedical Applications of Polymeric Materials
鶴田, 禎., Kataoka, K., & Hayashi, T. (1993) · CRC Press eBooks · Cited by 328
A Glucose-Controlled Insulin-Delivery System: Semisynthetic Insulin Bound to Lectin
Brownlee, M., & Cerami, A. (1979) · Science · doi:10.1126/science.505005 · Cited by 319
Enzyme responsive materials: design strategies and future developments
Zelzer, M., Todd, S. J., Hirst, A. R., McDonald, T. O., & Ulijn, R. V. (2013) · Biomater. Sci. · doi:10.1039/c2bm00041e · Cited by 306
Controlling the shape of 3D microstructures by temperature and light
Hippler, M., Blasco, E., Qu, J., Tanaka, M., Barner-Kowollik, C., Wegener, M., & Bastmeyer, M. (2019) · Nature Communications · doi:10.1038/s41467-018-08175-w · Cited by 293
A Synthetic Approach Toward a Self‐Regulated Insulin Delivery System
Matsumoto, A., Ishii, T., Nishida, J., Matsumoto, H., Kataoka, K., & Miyahara, Y. (2012) · Angewandte Chemie International Edition · doi:10.1002/anie.201106252 · Cited by 292
Deformation of ferrogels induced by nonuniform magnetic fields
Zrínyi, M., Barsi, L., & Büki, A. (1996) · The Journal of Chemical Physics · doi:10.1063/1.471564 · Cited by 279
Okwuosa, T. C., Pereira, B. C., Arafat, B., Cieszynska, M., Isreb, A., & Alhnan, M. A. (2017) · Pharmaceutical Research · doi:10.1007/s11095-016-2073-3 · Cited by 277
Design and evaluation of novel pH-sensitive chitosan nanoparticles for oral insulin delivery
Makhlof, A., Tozuka, Y., & Takeuchi, H. (2011) · European Journal of Pharmaceutical Sciences · doi:10.1016/j.ejps.2010.12.007 · Cited by 273
Bio‐Origami Hydrogel Scaffolds Composed of Photocrosslinked PEG Bilayers
Jamal, M., Kadam, S. S., Xiao, R., Jivan, F., Onn, T., Fernandes, R., Nguyen, T. D., & Gracias, D. H. (2013) · Advanced Healthcare Materials · doi:10.1002/adhm.201200458 · Cited by 270
Origami and 4D printing of elastomer-derived ceramic structures
Liu, G., Zhao, Y., Wu, G., & Lu, J. (2018) · Science Advances · doi:10.1126/sciadv.aat0641 · Cited by 270
Zhang, Q., Zhang, K., & Hu, G. (2016) · Scientific Reports · doi:10.1038/srep22431 · Cited by 269
Recent Advances in light-responsive on-demand drug-delivery Systems
Linsley, C. S., & Wu, B. M. (2017) · Therapeutic Delivery · doi:10.4155/tde-2016-0060 · Cited by 265
Stimuli‐Responsive Theragrippers for Chemomechanical Controlled Release
Malachowski, K., Breger, J., Kwag, H. R., Wang, M. O., Fisher, J. P., Selaru, F. M., & Gracias, D. H. (2014) · Angewandte Chemie International Edition · doi:10.1002/anie.201311047 · Cited by 257
Khalyfa, A., Vogt, S., Weisser, J., Grimm, G., Rechtenbach, A., Meyer, W., & Schnabelrauch, M. (2007) · Journal of Materials Science: Materials in Medicine · doi:10.1007/s10856-006-0073-2 · Cited by 247
Thermo- and photo-responsive polymeric systems
Dai, S., Ravi, P., & Tam, K. C. (2009) · Soft Matter · doi:10.1039/b820044k · Cited by 244
Functional Polymers and Nanocomposites for 3D Printing of Smart Structures and Devices
Nadgorny, M., & Ameli, A. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b01786 · Cited by 244
Complex 3D‐Printed Microchannels within Cell‐Degradable Hydrogels
Song, K. H., Highley, C. B., Rouff, A., & Burdick, J. A. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201801331 · Cited by 241
Szilvśi-Nagy, M., & Mátyási, G. (2003) · Mathematical and Computer Modelling · doi:10.1016/s0895-7177(03)90079-3 · Cited by 238
Responsive cellulose-hydrogel composite ink for 4D printing
Mulakkal, M. C., Trask, R. S., Ting, V. P., & Seddon, A. M. (2018) · Materials & Design · doi:10.1016/j.matdes.2018.09.009 · Cited by 238
Three-Dimensional Printing of pH-Responsive and Functional Polymers on an Affordable Desktop Printer
Nadgorny, M., Xiao, Z., Chen, C., & Connal, L. A. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b07388 · Cited by 234
Podual, K., Doyle, F. J., & Peppas, N. A. (2000) · Journal of Controlled Release · doi:10.1016/s0168-3659(00)00195-4 · Cited by 222
Structural Color for Additive Manufacturing: 3D-Printed Photonic Crystals from Block Copolymers
Boyle, B. M., French, T. A., Pearson, R. M., McCarthy, B. G., & Miyake, G. M. (2017) · ACS Nano · doi:10.1021/acsnano.7b00032 · Cited by 217
McCain, M. L., & Parker, K. K. (2011) · Pflügers Archiv - European Journal of Physiology · doi:10.1007/s00424-011-0951-4 · Cited by 214
Jiang, X., Lavender, C. A., Woodcock, J. W., & Zhao, B. (2008) · Macromolecules · doi:10.1021/ma7028105 · Cited by 207
Mechanisms of multi-shape memory effects and associated energy release in shape memory polymers
Yu, K., Xie, T., Leng, J., Ding, Y., & Qi, H. J. (2012) · Soft Matter · doi:10.1039/c2sm25292a · Cited by 207
Optimizing PANi doped electroactive substrates as patches for the regeneration of cardiac muscle
Borriello, A., Guarino, V., Schiavo, L., Alvarez-Perez, M. A., & Ambrosio, L. (2011) · Journal of Materials Science: Materials in Medicine · doi:10.1007/s10856-011-4259-x · Cited by 204
Biomedical Applications of Polymeric Materials
Tsuruta, T., Kataoka, K., & Hayashi, T. (1993) · Cited by 204
Biologic-free mechanically induced muscle regeneration
Cezar, C. A., Roche, E. T., Vandenburgh, H. H., Duda, G. N., Walsh, C. J., & Mooney, D. J. (2016) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1517517113 · Cited by 201
4D Printing: dawn of an emerging technology cycle
Pei, E. (2014) · Assembly Automation · doi:10.1108/aa-07-2014-062 · Cited by 199
Regulation of insulin secretion and blood glucose metabolism by adrenomedullin
Martinez, A. (1996) · Endocrinology · doi:10.1210/en.137.6.2626 · Cited by 195
3D Printed Programmable Release Capsules
Gupta, M. K., Meng, F., Johnson, B. N., Kong, Y. L., Tian, L., Yeh, Y.-W., Masters, N., Singamaneni, S., & McAlpine, M. C. (2015) · Nano Letters · doi:10.1021/acs.nanolett.5b01688 · Cited by 190
4D Printing of Complex Structures with a Fast Response Time to Magnetic Stimulus
Zhu, P., Yang, W., Wang, R., Gao, S., Li, B., & Li, Q. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b12853 · Cited by 190
Wavelength‐Controlled Photocleavage for the Orthogonal and Sequential Release of Multiple Proteins
Azagarsamy, M. A., & Anseth, K. S. (2013) · Angewandte Chemie International Edition · doi:10.1002/anie.201308174 · Cited by 175
Technological considerations for 4D printing: An overview
Pei, E., & Loh, G. H. (2018) · Progress in Additive Manufacturing · doi:10.1007/s40964-018-0047-1 · Cited by 171
Three-Dimensional Printing of Shape Memory Composites with Epoxy-Acrylate Hybrid Photopolymer
Yu, R., Yang, X., Zhang, Y., Zhao, X., Wu, X., Zhao, T., Zhao, Y., & Huang, W. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b13531 · Cited by 168
Three-dimensional printing: technologies, applications, and limitations in neurosurgery
Pucci, J. U., Christophe, B. R., Sisti, J. A., & Connolly, E. S. (2017) · Biotechnology Advances · doi:10.1016/j.biotechadv.2017.05.007 · Cited by 168
Sun, S., Titushkin, I., & Cho, M. (2006) · Bioelectrochemistry · doi:10.1016/j.bioelechem.2005.11.007 · Cited by 166
Magnetic self-assembly of three-dimensional surfaces from planar sheets
Boncheva, M., Andreev, S. A., Mahadevan, L., Winkleman, A., Reichman, D. R., Prentiss, M. G., Whitesides, S., & Whitesides, G. M. (2005) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.0500807102 · Cited by 165
Na+ and K+ ion imbalances in Alzheimer's disease
Vitvitsky, V. M., Garg, S. K., Keep, R. F., Albin, R. L., & Banerjee, R. (2012) · Biochimica et Biophysica Acta (BBA) - Molecular Basis of Disease · doi:10.1016/j.bbadis.2012.07.004 · Cited by 162
Kuksenok, O., & Balazs, A. C. (2016) · Materials Horizons · doi:10.1039/c5mh00212e · Cited by 162
4D Printing and Universal Transformation
Tibbits, S., McKnelly, C., Olguin, C., Dikovsky, D., & Hirsch, S. (2014) · ACADIA proceedings · doi:10.52842/conf.acadia.2014.539 · Cited by 160
Sundaramurthy, A., Krishnamoorthy, G., Ramkumar, K. M., & Raichur, A. M. (2016) · Materials Science and Engineering C · doi:10.1016/j.msec.2016.09.003 · Cited by 155
Development of 3D printed fibrillar collagen scaffold for tissue engineering
Nocera, A. D., Comín, R., Salvatierra, N. A., & Cid, M. P. (2018) · Biomedical Microdevices · doi:10.1007/s10544-018-0270-z · Cited by 154
Function of Osteocytes in Bone—Their Role in Mechanotransduction
Burger, E. H., Klein‐Nulend, J., van der Plas, A., & Nijweide, P. J. (1995) · Journal of Nutrition · doi:10.1093/jn/125.suppl_7.2020s · Cited by 151
Karch, R., Neumann, F., Neumann, M., & Schreiner, W. (1999) · Computers in Biology and Medicine · doi:10.1016/s0010-4825(98)00045-6 · Cited by 149
Shape-Memory Polymers and Multifunctional Composites
(2010) · CRC Press eBooks · doi:10.1201/9781420090208 · Cited by 144
Magnetic sensing platform technologies for biomedical applications
Lin, G., Makarov, D., & Schmidt, O. G. (2017) · Lab on a Chip · doi:10.1039/c7lc00026j · Cited by 144
Review on the Functional Determinants and Durability of Shape Memory Polymers
Pretsch, T. (2010) · Polymers · doi:10.3390/polym2030120 · Cited by 138
A general strategy of 3D printing thermosets for diverse applications
Lei, D., Yang, Y., Liu, Z., Chen, S., Song, B., Shen, A., Yang, B., Li, S., Yuan, Z., Qi, Q., et al. (2018) · Materials Horizons · doi:10.1039/c8mh00937f · Cited by 138
Temperature and pH responsive 3D printed scaffolds
Dutta, S., & Cohn, D. (2017) · Journal of Materials Chemistry B · doi:10.1039/c7tb02368e · Cited by 135
Sensitively Humidity‐Driven Actuator Based on Photopolymerizable PEG‐DA Films
Lv, C., Xia, H., Shi, Q., Wang, G., Wang, Y., Chen, Q., Zhang, Y., Liu, L., & Sun, H. (2017) · Advanced Materials Interfaces · doi:10.1002/admi.201601002 · Cited by 130
Development and Characterization of a 3D Printed, Keratin-Based Hydrogel
Placone, J. K., Navarro, J., Laslo, G. W., Lerman, M. J., Gabard, A. R., Herendeen, G. J., Falco, E. E., Tomblyn, S., Burnett, L., & Fisher, J. P. (2016) · Annals of Biomedical Engineering · doi:10.1007/s10439-016-1621-7 · Cited by 125
3D printable light-responsive polymers
Roppolo, I., Chiappone, A., Angelini, A., Stassi, S., Frascella, F., Pirri, C. F., Ricciardi, C., & Descrovi, E. (2017) · Materials Horizons · doi:10.1039/c7mh00072c · Cited by 125
Guo, B., Sun, Y., Finne‐Wistrand, A., Mustafa, K., & Albertsson, A. (2011) · Acta Biomaterialia · doi:10.1016/j.actbio.2011.09.027 · Cited by 122
Matrix Metalloprotease Triggered Delivery of Cancer Chemotherapeutics from Hydrogel Matrixes
Tauro, J. R., & Gemeinhart, R. A. (2005) · Bioconjugate Chemistry · doi:10.1021/bc0501303 · Cited by 121
Li, Y., Zhi, X., Lin, J., You, X., & Yuan, J. (2016) · Materials Science and Engineering C · doi:10.1016/j.msec.2016.12.067 · Cited by 115
3D printing of responsive hydrogels for drug-delivery systems
Larush, L., Kaner, I., Fluksman, A., Tamsut, A., Pawar, A. A., Lesnovski, P., Benny, O., & Magdassi, S. (2017) · Journal of 3D Printing in Medicine · doi:10.2217/3dp-2017-0009 · Cited by 108
Programming temporal shapeshifting
Hu, X., Zhou, J., Vatankhah-Varnosfaderani, M., Daniel, W. F. M., Li, Q., Zhushma, A. P., Dobrynin, A. V., & Sheiko, S. S. (2016) · Nature Communications · doi:10.1038/ncomms12919 · Cited by 93
Cell death induced by AC magnetic fields and magnetic nanoparticles: Current state and perspectives
Goya, G. F., Asín, L., & Ibarra, M. R. (2013) · International Journal of Hyperthermia · doi:10.3109/02656736.2013.838646 · Cited by 91
4D printing – revolution or fad?
Pei, E. (2014) · Assembly Automation · doi:10.1108/aa-02-2014-014 · Cited by 89
The contribution of cellular mechanotransduction to cardiomyocyte form and function
Sheehy, S. P., Grosberg, A., & Parker, K. K. (2012) · Biomechanics and Modeling in Mechanobiology · doi:10.1007/s10237-012-0419-2 · Cited by 87
Sayyar, S., Björninen, M., Haimi, S. P., Miettinen, S., Gilmore, K. J., Grijpma, D. W., & Wallace, G. G. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b09962 · Cited by 81
A Design Method for 3D Origami Based on Rotational Sweep
Mitani, J. (2009) · Computer-Aided Design and Applications · doi:10.3722/cadaps.2009.69-79 · Cited by 80
Economic 3D-printing approach for transplantation of human stem cell-derived β-like cells
Song, J., & Millman, J. (2016) · Biofabrication · doi:10.1088/1758-5090/9/1/015002 · Cited by 79
Smart release of antimicrobial ZnO nanoplates from a pH-responsive keratin hydrogel
Villanueva, M. E., Cuestas, M. L., Pérez, C. J., Orto, V. C. D., & Copello, G. J. (2018) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2018.10.067 · Cited by 75
Photo-induced bending in a light-activated polymer laminated composite
Mu, X., Sowan, N., Tumbic, J., Bowman, C. N., Mather, P. T., & Qi, H. J. (2015) · Soft Matter · doi:10.1039/c4sm02592j · Cited by 72
Galuska, S. P., Geyer, R., Gerardy‐Schahn, R., Mühlenhoff, M., & Geyer, H. (2007) · Journal of Biological Chemistry · doi:10.1074/jbc.m707024200 · Cited by 70
Wang, G., Yao, L., Wang, W., Ou, J., Cheng, C.-Y., & Ishii, H. (2016) · CHI Conference on Human Factors in Computing Systems · doi:10.1145/2858036.2858281 · Cited by 70
Mechanisms of hepatocyte attachment to keratin biomaterials
Richter, J. R., de Guzman, R. C., & Dyke, M. E. V. (2011) · Biomaterials · doi:10.1016/j.biomaterials.2011.06.061 · Cited by 66
Electrospun Human Keratin Matrices as Templates for Tissue Regeneration
Sow, W. T., Lui, Y. S., & Ng, K. W. (2013) · Nanomedicine · doi:10.2217/nnm.13.38 · Cited by 64
Self-citationSustainable and smart keratin hydrogel with pH-sensitive swelling and enhanced mechanical properties
Ramos, M. L. P., González, J. A., Fabián, L., Pérez, C. J., Villanueva, M. E., & Copello, G. J. (2017) · Materials Science and Engineering C · doi:10.1016/j.msec.2017.04.120 · Cited by 63
Arizaga, A., Ibarz, G., & Piñol, R. (2010) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2010.05.051 · Cited by 55
Sun, S., Wise, J. K., & Cho, M. (2004) · Tissue Engineering · doi:10.1089/ten.2004.10.1548 · Cited by 53
Zhu, Y., Jiang, H., Ye, S., Yoshizumi, T., & Wagner, W. R. (2015) · Biomaterials · doi:10.1016/j.biomaterials.2015.02.100 · Cited by 53
The swelling of collagen in alkaline solutions. 1. Swelling in solutions of sodium hydroxide
Bowes, J. H., & Kenten, R. H. (1950) · Biochemical Journal · doi:10.1042/bj0460001 · Cited by 52
Airway Stent Insertion Simulated With a Three-Dimensional Printed Airway Model
Miyazaki, T., Yamasaki, N., Tsuchiya, T., Matsumoto, K., Takagi, K., & Nagayasu, T. (2014) · The Annals of Thoracic Surgery · doi:10.1016/j.athoracsur.2014.10.021 · Cited by 51
Dong, S., Han, L., Du, C., Wang, X., Li, L., & Wei, Y. (2017) · Macromolecular Rapid Communications · doi:10.1002/marc.201600551 · Cited by 46
The Development of a Glucose Dehydrogenase 3D-Printed Glucose Sensor: A Proof-of-Concept Study
Adams, A. C., Malkoc, A., & Belle, J. T. L. (2017) · Journal of Diabetes Science and Technology · doi:10.1177/1932296817715272 · Cited by 39
3D-Printed Biodegradable Microswimmer for Drug Delivery and Targeted Cell LabelingPreprint
Ceylan, H., Yasa, I. C., Yaşa, Ö., et al. (2018) · bioRxiv (Cold Spring Harbor Laboratory) · doi:10.1101/379024 · Cited by 29
Modeling Origami for Computational Construction and Beyond
Ida, T., Takahashi, H., Marin, M., & Ghourabi, F. (2007) · Springer eBooks · doi:10.1007/978-3-540-74477-1_60 · Cited by 10
Integrated multi-media platform for hybrid 3D printing
Dunn, C. K. (2017) · SMARTech Repository (Georgia Institute of Technology) · Cited by 1
Cited by
Materials design for bone-tissue engineering
Koons, G. L., Diba, M., & Mikos, A. G. (2020) · Nature Reviews Materials · doi:10.1038/s41578-020-0204-2 · Cited by 1,699
Recent advances in smart stimuli-responsive biomaterials for bone therapeutics and regeneration
Wei, H., Cui, J., Lin, K., Xie, J., & Wang, X. (2022) · Bone Research · doi:10.1038/s41413-021-00180-y · Cited by 471
Carboxymethyl cellulose-based materials for infection control and wound healing: A review
Kanikireddy, V., Varaprasad, K., Jayaramudu, T., Karthikeyan, C., & Sadiku, R. (2020) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2020.07.160 · Cited by 455
Fabrication of Biomedical Scaffolds Using Biodegradable Polymers.
Kirillova, A., Yeazel, T. R., Asheghali, D., Petersen, S. R., Dort, S., Gall, K., & Becker, M. L. (2021) · Chemical Reviews · doi:10.1021/acs.chemrev.0c01200 · Cited by 368
Khalid, M. Y., Arif, Z. U., Noroozi, R., Zolfagharian, A., & Bodaghi, M. (2022) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2022.07.035 · Cited by 336
Metadata
- Authors
- Lui, Y. S., Sow, W. T., Tan, L. P., Wu, Y., Lai, Y., & Li, H.
- Venue
- Acta Biomaterialia
- Publisher
- Elsevier BV
- Published
- 2019-07
- Volume
- 92
- Pages
- 19-36
- ISSN
- 1742-7061 (ISSN-L)
- OpenAlex
- W2944478708
- Cited by
- 333
- References
- 154
- FWCI
- 18.00
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.