The DOI matches its Crossref record; 200 of the 200 references it cites were found in a registry or an index.
Inkjet Bioprinting of Biomaterials
Abstract
The inkjet technique has the capability of generating droplets in the picoliter volume range, firing thousands of times in a few seconds and printing in the noncontact manner. Since its emergence, inkjet technology has been widely utilized in the publishing industry for printing of text and pictures. As the technology developed, its applications have been expanded from two-dimensional (2D) to three-dimensional (3D) and even used to fabricate components of electronic devices. At the end of the twentieth century, researchers were aware of the potential value of this technology in life sciences and tissue engineering because its picoliter-level printing unit is suitable for depositing biological components. Currently inkjet technology has been becoming a practical tool in modern medicine serving for drug development, scaffold building, and cell depositing. In this article, we first review the history, principles and different methods of developing this technology. Next, we focus on the recent achievements of inkjet printing in the biological field. Inkjet bioprinting of generic biomaterials, biomacromolecules, DNAs, and cells and their major applications are introduced in order of increasing complexity. The current limitations/challenges and corresponding solutions of this technology are also discussed. A new concept, biopixels, is put forward with a combination of the key characteristics of inkjet printing and basic biological units to bring a comprehensive view on inkjet-based bioprinting. Finally, a roadmap of the entire 3D bioprinting is depicted at the end of this review article, clearly demonstrating the past, present, and future of 3D bioprinting and our current progress in this field.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
3D bioprinting of tissues and organs
Murphy, S. V., & Atala, A. (2014) · Nature Biotechnology · doi:10.1038/nbt.2958 · Cited by 7,034
Biological properties of extracellular vesicles and their physiological functions
Yáñez‐Mó, M., Siljander, P. R. ‐., Andreu, Z., Bedina Zavec, A., Borràs, F. E., Buzas, E. I., Buzas, K., Casal, E., Cappello, F., Carvalho, J., et al. (2015) · Journal of Extracellular Vesicles · doi:10.3402/jev.v4.27066 · Cited by 5,926
Polymers for 3D Printing and Customized Additive Manufacturing
Ligon, S. C., Liska, R., Stampfl, J., Gurr, M., & Mülhaupt, R. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00074 · Cited by 3,741
3D printing of polymer matrix composites: A review and prospective
Wang, X., Jiang, M., Zhou, Z., Gou, J., & Hui, D. (2017) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2016.11.034 · Cited by 3,325
Gibson, I., Rosen, D., & Stucker, B. (2015) · doi:10.1007/978-1-4939-2113-3 · Cited by 3,299
Rayleigh, L. (1878) · Proceedings of the London Mathematical Society · doi:10.1112/plms/s1-10.1.4 · Cited by 3,064
DROP IMPACT DYNAMICS: Splashing, Spreading, Receding, Bouncing…
Yarin, A. L. (2006) · Annual Review of Fluid Mechanics · doi:10.1146/annurev.fluid.38.050304.092144 · Cited by 2,677
Inkjet Printing—Process and Its Applications
Singh, M., Haverinen, H. M., Dhagat, P., & Jabbour, G. E. (2010) · Advanced Materials · doi:10.1002/adma.200901141 · Cited by 2,375
Derby, B. (2010) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-070909-104502 · Cited by 1,984
Inkjet Printing of Polymers: State of the Art and Future Developments
de Gans, B. ‐., Duineveld, P. C., & Schubert, U. S. (2004) · Advanced Materials · doi:10.1002/adma.200300385 · Cited by 1,906
Inkjet Printing for Materials and Devices
Calvert, P. (2001) · Chemistry of Materials · doi:10.1021/cm0101632 · Cited by 1,822
3D bioprinting for engineering complex tissues
Mandrycky, C., Wang, Z., Kim, K., & Kim, D.-H. (2016) · Biotechnology Advances · doi:10.1016/j.biotechadv.2015.12.011 · Cited by 1,754
High-resolution electrohydrodynamic jet printing
Park, J.-U., Hardy, M., Kang, S. J., Barton, K., Adair, K., Mukhopadhyay, D. K., Lee, C. Y., Strano, M. S., Alleyne, A. G., Georgiadis, J. G., et al. (2007) · Nature Materials · doi:10.1038/nmat1974 · Cited by 1,492
New Opportunities for an Ancient Material
Omenetto, F. G., & Kaplan, D. L. (2010) · Science · doi:10.1126/science.1188936 · Cited by 1,457
Department of Materials, U. O. O., Sachlos, E., & Czernuszka, J. (2003) · European Cells and Materials · doi:10.22203/ecm.v005a03 · Cited by 1,303
A review of trends and limitations in hydrogel-rapid prototyping for tissue engineering
Billiet, T., Vandenhaute, M., Schelfhout, J., Van Vlierberghe, S., & Dubruel, P. (2012) · Biomaterials · doi:10.1016/j.biomaterials.2012.04.050 · Cited by 1,284
Hydrogel microparticles for biomedical applications
Daly, A. C., Riley, L., Segura, T., & Burdick, J. A. (2019) · Nature Reviews Materials · doi:10.1038/s41578-019-0148-6 · Cited by 1,249
Inkjet-Printed Graphene Electronics
Torrisi, F., Hasan, T., Wu, W., Sun, Z., Lombardo, A., Kulmala, T. S., Hsieh, G.-W., Jung, S., Bonaccorso, F., Paul, P. J., et al. (2012) · ACS Nano · doi:10.1021/nn2044609 · Cited by 1,195
Advances in 4D Printing: Materials and Applications
Kuang, X., Roach, D. J., Wu, J., Hamel, C. M., Ding, Z., Wang, T., Dunn, M. L., & Qi, H. J. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201805290 · Cited by 1,095
Hydrogels for Biomedical Applications: Their Characteristics and the Mechanisms behind Them
Chai, Q., Jiao, Y., & Yu, X. (2017) · Gels · doi:10.3390/gels3010006 · Cited by 1,072
DNA Microarray Technology: Devices, Systems, and Applications
Heller, M. J. (2002) · Annual Review of Biomedical Engineering · doi:10.1146/annurev.bioeng.4.020702.153438 · Cited by 1,068
Biomaterials in Tissue Engineering
Hubbell, J. A. (1995) · Nature Biotechnology · doi:10.1038/nbt0695-565 · Cited by 1,060
Inkjet printing of viable mammalian cells
Xu, T., Jin, J., Gregory, C., Hickman, J. J., & Boland, T. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2004.04.011 · Cited by 1,035
Self-citationVolumetric additive manufacturing via tomographic reconstruction
Kelly, B. E., Bhattacharya, I., Heidari, H., Shusteff, M., Spadaccini, C. M., & Taylor, H. K. (2019) · Science · doi:10.1126/science.aau7114 · Cited by 1,025
Ruhrberg, C., Gerhardt, H., Golding, M., Watson, R., Ioannidou, S., Fujisawa, H., Betsholtz, C., & Shima, D. T. (2002) · Genes & Development · doi:10.1101/gad.242002 · Cited by 914
Large-scale de novo DNA synthesis: technologies and applications
Kosuri, S., & Church, G. M. (2014) · Nature Methods · doi:10.1038/nmeth.2918 · Cited by 869
A comprehensive review on droplet-based bioprinting: Past, present and future
Gudapati, H., Dey, M., & Ozbolat, I. (2016) · Biomaterials · doi:10.1016/j.biomaterials.2016.06.012 · Cited by 859
3D printing of functional biomaterials for tissue engineering
Zhu, W., Ma, X., Gou, M., Mei, D., Zhang, K., & Chen, S. (2016) · Current Opinion in Biotechnology · doi:10.1016/j.copbio.2016.03.014 · Cited by 822
Inkjet printing as a deposition and patterning tool for polymers and inorganic particles
Tekin, E., Smith, P. J., & Schubert, U. S. (2008) · Soft Matter · doi:10.1039/b711984d · Cited by 807
Direct writing by way of melt electrospinning
Brown, T. D., Dalton, P. D., & Hutmacher, D. W. (2011) · Advanced Materials · doi:10.1002/adma.201103482 · Cited by 800
Application of inkjet printing to tissue engineering
Boland, T., Xu, T., Damon, B., & Cui, X. (2006) · Biotechnology Journal · doi:10.1002/biot.200600081 · Cited by 783
Self-citationShirazi, S. F. S., Gharehkhani, S., Mehrali, M., Yarmand, H., Metselaar, H. S. C., Adib Kadri, N., & Osman, N. A. A. (2015) · Science and Technology of Advanced Materials · doi:10.1088/1468-6996/16/3/033502 · Cited by 755
Morphogen gradient interpretation
Gurdon, J. B., & Bourillot, P.-Y. (2001) · Nature · doi:10.1038/35101500 · Cited by 748
Sun, D., Chang, C., Li, S., & Lin, L. (2006) · Nano Letters · doi:10.1021/nl0602701 · Cited by 748
Influence of Fluid Physical Properties on Ink-Jet Printability
Jang, D., Kim, D., & Moon, J. (2009) · Langmuir · doi:10.1021/la900059m · Cited by 745
Biofabrication: reappraising the definition of an evolving field
Groll, J., Boland, T., Blunk, T., Burdick, J. A., Cho, D.-W., Dalton, P. D., Derby, B., Forgacs, G., Li, Q., Mironov, V. A., et al. (2016) · Biofabrication · doi:10.1088/1758-5090/8/1/013001 · Cited by 731
Self-citationInkjet printing for high-throughput cell patterning
Roth, E. A., Xu, T., Das, M., Gregory, C., Hickman, J. J., & Boland, T. (2004) · Biomaterials · doi:10.1016/j.biomaterials.2003.10.052 · Cited by 714
Self-citation4D Bioprinting for Biomedical Applications
Gao, B., Yang, Q., Zhao, X., Jin, G., Ma, Y., & Xu, F. (2016) · Trends in Biotechnology · doi:10.1016/j.tibtech.2016.03.004 · Cited by 711
Human microvasculature fabrication using thermal inkjet printing technology
Cui, X., & Boland, T. (2009) · Biomaterials · doi:10.1016/j.biomaterials.2009.07.056 · Cited by 704
Direct Human Cartilage Repair Using Three-Dimensional Bioprinting Technology
Cui, X., Breitenkamp, K., Finn, M. G., Lotz, M., & D'Lima, D. D. (2012) · Tissue Engineering Part A · doi:10.1089/ten.tea.2011.0543 · Cited by 686
Biofabrication: A Guide to Technology and Terminology
Moroni, L., Boland, T., Burdick, J. A., De Maria, C., Derby, B., Forgacs, G., Groll, J., Li, Q., Malda, J., Mironov, V. A., et al. (2018) · Trends in Biotechnology · doi:10.1016/j.tibtech.2017.10.015 · Cited by 636
Self-citationXu, T., Binder, K. W., Albanna, M. Z., Dice, D., Zhao, W., Yoo, J. J., & Atala, A. (2012) · Biofabrication · doi:10.1088/1758-5082/5/1/015001 · Cited by 631
Self-citationXu, T., Zhao, W., Zhu, J.-M., Albanna, M. Z., Yoo, J. J., & Atala, A. (2013) · Biomaterials · doi:10.1016/j.biomaterials.2012.09.035 · Cited by 607
Self-citationFarahani, R. D., Dubé, M., & Therriault, D. (2016) · Advanced Materials · doi:10.1002/adma.201506215 · Cited by 604
Numerical Calculation of the Fluid Dynamics of Drop-on-Demand Jets
Fromm, J. E. (1984) · IBM Journal of Research and Development · doi:10.1147/rd.283.0322 · Cited by 601
The dynamics of the piezo inkjet printhead operation☆
Wijshoff, H. (2010) · Physics Reports · doi:10.1016/j.physrep.2010.03.003 · Cited by 593
Thermal Inkjet Printing in Tissue Engineering and Regenerative Medicine
Cui, X., Boland, T., D.D'Lima, D., & K. Lotz, M. (2012) · Recent Patents on Drug Delivery & Formulation · doi:10.2174/187221112800672949 · Cited by 581
Emergence of 3D Printed Dosage Forms: Opportunities and Challenges
Alhnan, M. A., Okwuosa, T. C., Sadia, M., Wan, K.-W., Ahmed, W., & Arafat, B. (2016) · Pharmaceutical Research · doi:10.1007/s11095-016-1933-1 · Cited by 554
Thubagere, A. J., Li, W., Johnson, R. F., Chen, Z., Doroudi, S., Lee, Y. L., Izatt, G., Wittman, S., Srinivas, N., Woods, D., et al. (2017) · Science · doi:10.1126/science.aan6558 · Cited by 552
Biocompatible Inkjet Printing Technique for Designed Seeding of Individual Living Cells
Nakamura, M., Kobayashi, A., Takagi, F., Watanabe, A., Hiruma, Y., Ohuchi, K., Iwasaki, Y., Horie, M., Morita, I., & Takatani, S. (2005) · Tissue Engineering · doi:10.1089/ten.2005.11.1658 · Cited by 538
Cell and organ printing 1: Protein and cell printers
Wilson, W. C., & Boland, T. (2003) · The Anatomical Record Part A: Discoveries in Molecular, Cellular, and Evolutionary Biology · doi:10.1002/ar.a.10057 · Cited by 531
Ouyang, L., Highley, C. B., Sun, W., & Burdick, J. A. (2017) · Advanced Materials · doi:10.1002/adma.201604983 · Cited by 524
Viability and electrophysiology of neural cell structures generated by the inkjet printing method
Xu, T., Gregory, C. A., Molnar, P., Cui, X., Jalota, S., Bhaduri, S. B., & Boland, T. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2006.01.048 · Cited by 520
Self-citationAlbanna, M., Binder, K. W., Murphy, S. V., Kim, J., Qasem, S. A., Zhao, W., Tan, J., El-Amin, I. B., Dice, D. D., Marco, J., et al. (2019) · Scientific Reports · doi:10.1038/s41598-018-38366-w · Cited by 512
Self-citationDelivery of human fibroblast cells by piezoelectric drop-on-demand inkjet printing
Saunders, R. E., Gough, J. E., & Derby, B. (2008) · Biomaterials · doi:10.1016/j.biomaterials.2007.09.032 · Cited by 495
‘Printability' of Candidate Biomaterials for Extrusion Based 3D Printing: State‐of‐the‐Art
Kyle, S., Jessop, Z. M., Al‐Sabah, A., & Whitaker, I. S. (2017) · Advanced Healthcare Materials · doi:10.1002/adhm.201700264 · Cited by 495
3D Printing technologies for drug delivery: a review
Prasad, L. K., & Smyth, H. (2016) · Drug Development and Industrial Pharmacy · doi:10.3109/03639045.2015.1120743 · Cited by 454
Biodegradable polymers applied in tissue engineering research: a review
Martina, M., & Hutmacher, D. W. (2007) · Polymer International · doi:10.1002/pi.2108 · Cited by 449
Wingless gradient formation in the Drosophila wing
Strigini, M., & Cohen, S. M. (2000) · Current Biology · doi:10.1016/s0960-9822(00)00378-x · Cited by 445
Kim, B. H., Onses, M. S., Lim, J. B., Nam, S., Oh, N., Kim, H., Yu, K. J., Lee, J. W., Kim, J.-H., Kang, S.-K., et al. (2015) · Nano Letters · doi:10.1021/nl503779e · Cited by 444
Microarray fabrication with covalent attachment of DNA using Bubble Jet technology
Okamoto, T., Suzuki, T., & Yamamoto, N. (2000) · Nature Biotechnology · doi:10.1038/74507 · Cited by 440
Chen, P., Chen, H., Qiu, J., & Zhou, C. (2010) · Nano Research · doi:10.1007/s12274-010-0020-x · Cited by 435
Bioprinting Technology: A Current State-of-the-Art Review
Dababneh, A. B., & Ozbolat, I. T. (2014) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4028512 · Cited by 427
Liposomes in tissue engineering and regenerative medicine
Monteiro, N., Martins, A., Reis, R. L., & Neves, N. M. (2014) · Journal of The Royal Society Interface · doi:10.1098/rsif.2014.0459 · Cited by 427
3D and 4D Printing of Polymers for Tissue Engineering Applications
Tamay, D. G., Dursun Usal, T., Alagoz, A. S., Yucel, D., Hasirci, N., & Hasirci, V. (2019) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2019.00164 · Cited by 417
An experimental study of drop-on-demand drop formation
Dong, H., Carr, W. W., & Morris, J. F. (2006) · Physics of Fluids · doi:10.1063/1.2217929 · Cited by 395
Additive manufacturing of scaffolds with sub-micron filaments via melt electrospinning writing
Hochleitner, G., Jüngst, T., Brown, T. D., Hahn, K., Moseke, C., Jakob, F., Dalton, P. D., & Groll, J. (2015) · Biofabrication · doi:10.1088/1758-5090/7/3/035002 · Cited by 385
Li, Y.-C., Zhang, Y. S., Akpek, A., Shin, S. R., & Khademhosseini, A. (2016) · Biofabrication · doi:10.1088/1758-5090/9/1/012001 · Cited by 385
Inkjet printing ceramics: From drops to solid
Derby, B. (2011) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2011.01.016 · Cited by 365
Inkjet printing biomaterials for tissue engineering: bioprinting
Saunders, R. E., & Derby, B. (2014) · International Materials Reviews · doi:10.1179/1743280414y.0000000040 · Cited by 365
Cell damage evaluation of thermal inkjet printed Chinese hamster ovary cells
Cui, X., Dean, D., Ruggeri, Z. M., & Boland, T. (2010) · Biotechnology and Bioengineering · doi:10.1002/bit.22762 · Cited by 364
Bioprinting for cancer research
Knowlton, S., Onal, S., Yu, C. H., Zhao, J. J., & Tasoglu, S. (2015) · Trends in Biotechnology · doi:10.1016/j.tibtech.2015.06.007 · Cited by 361
Phillippi, J. A., Miller, E., Weiss, L., Huard, J., Waggoner, A., & Campbell, P. (2008) · Stem Cells · doi:10.1634/stemcells.2007-0520 · Cited by 361
Polyaniline Nanowires on Si Surfaces Fabricated with DNA Templates
Ma, Y., Zhang, J., Zhang, G., & He, H. (2004) · Journal of the American Chemical Society · doi:10.1021/ja039621t · Cited by 359
Scaffold‐free inkjet printing of three‐dimensional zigzag cellular tubes
Xu, C., Chai, W., Huang, Y., & Markwald, R. R. (2012) · Biotechnology and Bioengineering · doi:10.1002/bit.24591 · Cited by 357
Gao, G., Schilling, A. F., Yonezawa, T., Wang, J., Dai, G., & Cui, X. (2014) · Biotechnology Journal · doi:10.1002/biot.201400305 · Cited by 351
Freeform inkjet printing of cellular structures with bifurcations
Christensen, K., Xu, C., Chai, W., Zhang, Z., Fu, J., & Huang, Y. (2015) · Biotechnology and Bioengineering · doi:10.1002/bit.25501 · Cited by 351
Gao, G., Schilling, A. F., Hubbell, K., Yonezawa, T., Truong, D., Hong, Y., Dai, G., & Cui, X. (2015) · Biotechnology Letters · doi:10.1007/s10529-015-1921-2 · Cited by 341
Gao, G., Yonezawa, T., Hubbell, K., Dai, G., & Cui, X. (2015) · Biotechnology Journal · doi:10.1002/biot.201400635 · Cited by 340
Bioprinting: inkjet printing proteins and hybrid cell-containing materials and structures
Derby, B. (2008) · Journal of Materials Chemistry · doi:10.1039/b807560c · Cited by 339
Nishiyama, Y., Nakamura, M., Henmi, C., Yamaguchi, K., Mochizuki, S., Nakagawa, H., & Takiura, K. (2009) · Journal of Biomechanical Engineering · doi:10.1115/1.3002759 · Cited by 322
Inkjet printing for pharmaceutics – A review of research and manufacturing
Daly, R., Harrington, T. S., Martin, G. D., & Hutchings, I. M. (2015) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2015.03.017 · Cited by 317
Biomatrices and biomaterials for future developments of bioprinting and biofabrication
Nakamura, M., Iwanaga, S., Henmi, C., Arai, K., & Nishiyama, Y. (2010) · Biofabrication · doi:10.1088/1758-5082/2/1/014110 · Cited by 311
KLEBE, R. (1988) · Experimental Cell Research · doi:10.1016/0014-4827(88)90275-3 · Cited by 310
Layer by Layer Three-dimensional Tissue Epitaxy by Cell-Laden Hydrogel Droplets
Moon, S., Hasan, S. K., Song, Y. S., Xu, F., Keles, H. O., Manzur, F., Mikkilineni, S., Hong, J. W., Nagatomi, J., Haeggstrom, E., et al. (2010) · Tissue Engineering Part C: Methods · doi:10.1089/ten.tec.2009.0179 · Cited by 305
3D printed anatomical nerve regeneration pathways
Johnson, B. N., Lancaster, K. Z., Zhen, G., He, J., Gupta, M. K., Kong, Y. L., Engel, E. A., Krick, K. D., Ju, A., Meng, F., et al. (2015) · Advanced Functional Materials · doi:10.1002/adfm.201501760 · Cited by 293
Kyobula, M., Adedeji, A., Alexander, M. R., Saleh, E., Wildman, R., Ashcroft, I., Gellert, P. R., & Roberts, C. J. (2017) · Journal of Controlled Release · doi:10.1016/j.jconrel.2017.06.025 · Cited by 288
Direct 3D cell-printing of human skin with functional transwell system
Kim, B. S., Lee, J.-S., Gao, G., & Cho, D.-W. (2017) · Biofabrication · doi:10.1088/1758-5090/aa71c8 · Cited by 282
DNA-Based Storage: Trends and Methods
Yazdi, S. M. H. T., Kiah, H. M., Garcia-Ruiz, E., Ma, J., Zhao, H., & Milenkovic, O. (2015) · IEEE Transactions on Molecular, Biological and Multi-Scale Communications · doi:10.1109/tmbmc.2016.2537305 · Cited by 278
Advances and Future Perspectives in 4D Bioprinting
Ashammakhi, N., Ahadian, S., Zengjie, F., Suthiwanich, K., Lorestani, F., Orive, G., Ostrovidov, S., & Khademhosseini, A. (2018) · Biotechnology Journal · doi:10.1002/biot.201800148 · Cited by 270
Microdrop Printing of Hydrogel Bioinks into 3D Tissue‐Like Geometries
Pataky, K., Braschler, T., Negro, A., Renaud, P., Lutolf, M. P., & Brugger, J. (2012) · Advanced Materials · doi:10.1002/adma.201102800 · Cited by 267
Inkjet printing of macromolecules on hydrogels to steer neural stem cell differentiation
Ilkhanizadeh, S., Teixeira, A. I., & Hermanson, O. (2007) · Biomaterials · doi:10.1016/j.biomaterials.2007.05.018 · Cited by 246
High Frequency Recording with Electrostatically Deflected Ink Jets
Sweet, R. G. (1965) · Review of Scientific Instruments · doi:10.1063/1.1719502 · Cited by 243
Essentials of 3D Biofabrication and Translation
(2015) · Elsevier eBooks · doi:10.1016/c2013-0-18665-5 · Cited by 234
Three-dimensional bioprinting in tissue engineering and regenerative medicine
Gao, G., & Cui, X. (2016) · Biotechnology Letters · doi:10.1007/s10529-015-1975-1 · Cited by 227
Guillemot, F., Mironov, V., & Nakamura, M. (2010) · Biofabrication · doi:10.1088/1758-5082/2/1/010201 · Cited by 224
Experimental study of the parameters for stable drop-on-demand inkjet performance
Liu, Y., & Derby, B. (2019) · Physics of Fluids · doi:10.1063/1.5085868 · Cited by 224
Tissue engineering with the aid of inkjet printers
Campbell, P. G., & Weiss, L. E. (2007) · Expert Opinion on Biological Therapy · doi:10.1517/14712598.7.8.1123 · Cited by 221
Drop-on-demand printing of cells and materials for designer tissue constructs
Boland, T., Tao, X., Damon, B. J., Manley, B., Kesari, P., Jalota, S., & Bhaduri, S. (2007) · Materials Science and Engineering: C · doi:10.1016/j.msec.2006.05.047 · Cited by 220
Fabrication and characterization of bio-engineered cardiac pseudo tissues
Xu, T., Baicu, C., Aho, M., Zile, M., & Boland, T. (2009) · Biofabrication · doi:10.1088/1758-5082/1/3/035001 · Cited by 211
Self-citation3D printing of tablets using inkjet with UV photoinitiation
Clark, E. A., Alexander, M. R., Irvine, D. J., Roberts, C. J., Wallace, M. J., Sharpe, S., Yoo, J., Hague, R. J. M., Tuck, C. J., & Wildman, R. D. (2017) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2017.06.085 · Cited by 207
Piezoelectric inkjet printing of polymers: Stem cell patterning on polymer substrates
Kim, J. D., Choi, J. S., Kim, B. S., Chan Choi, Y., & Cho, Y. W. (2010) · Polymer · doi:10.1016/j.polymer.2010.03.038 · Cited by 206
Ker, E. D. F., Nain, A. S., Weiss, L. E., Wang, J., Suhan, J., Amon, C. H., & Campbell, P. G. (2011) · Biomaterials · doi:10.1016/j.biomaterials.2011.07.025 · Cited by 205
Preparation of Personalized-dose Salbutamol Sulphate Oral Films with Thermal Ink-Jet Printing
Buanz, A. B. M., Saunders, M. H., Basit, A. W., & Gaisford, S. (2011) · Pharmaceutical Research · doi:10.1007/s11095-011-0450-5 · Cited by 202
Inkjet printing of transdermal microneedles for the delivery of anticancer agents
Uddin, M. J., Scoutaris, N., Klepetsanis, P., Chowdhry, B., Prausnitz, M. R., & Douroumis, D. (2015) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2015.01.038 · Cited by 198
Jayasinghe, S. N. (2013) · The Analyst · doi:10.1039/c3an36599a · Cited by 198
Three-dimensional printing of multilayered tissue engineering scaffolds
Bittner, S. M., Guo, J. L., Melchiorri, A., & Mikos, A. G. (2018) · Materials Today · doi:10.1016/j.mattod.2018.02.006 · Cited by 185
A DNA-of-things storage architecture to create materials with embedded memory.
Koch, J., Gantenbein, S., Masania, K., Stark, W. J., Erlich, Y., & Grass, R. N. (2020) · Nature Biotechnology · doi:10.1038/s41587-019-0356-z · Cited by 183
Daly, A. C., & Kelly, D. J. (2019) · Biomaterials · doi:10.1016/j.biomaterials.2018.12.028 · Cited by 176
Lee, B. K., Yun, Y. H., Choi, J. S., Choi, Y. C., Kim, J. D., & Cho, Y. W. (2012) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2012.02.011 · Cited by 172
In Vitro Organogenesis of Liver Tissuea
GRIFFITH, L. G., WU, B., CIMA, M. J., POWERS, M. J., CHAIGNAUD, B., & VACANTI, J. P. (1997) · Annals of the New York Academy of Sciences · doi:10.1111/j.1749-6632.1997.tb52212.x · Cited by 170
Three-dimensional inkjet biofabrication based on designed images
Arai, K., Iwanaga, S., Toda, H., Genci, C., Nishiyama, Y., & Nakamura, M. (2011) · Biofabrication · doi:10.1088/1758-5082/3/3/034113 · Cited by 167
Engineered spatial patterns of FGF-2 immobilized on fibrin direct cell organization
Campbell, P. G., Miller, E. D., Fisher, G. W., Walker, L. M., & Weiss, L. E. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2005.04.032 · Cited by 165
3D Powder Printing of β‐Tricalcium Phosphate Ceramics Using Different Strategies
Vorndran, E., Klarner, M., Klammert, U., Grover, L. M., Patel, S., Barralet, J. E., & Gbureck, U. (2008) · Advanced Engineering Materials · doi:10.1002/adem.200800179 · Cited by 164
Goldmann, T., & Gonzalez, J. S. (2000) · Journal of Biochemical and Biophysical Methods · doi:10.1016/s0165-022x(99)00049-4 · Cited by 161
Parallel on-chip gene synthesis and application to optimization of protein expression
Quan, J., Saaem, I., Tang, N. C., Ma, S., Nègre, N., GONG, H. R., White, K. P., & Tian, J. (2011) · Nature Biotechnology · doi:10.1038/nbt.1847 · Cited by 160
Yanez, M., Rincon, J., Dones, A., De Maria, C., Gonzales, R., & Boland, T. (2015) · Tissue Engineering Part A · doi:10.1089/ten.tea.2013.0561 · Cited by 158
Standardized 3D Bioprinting of Soft Tissue Models with Human Primary Cells
Rimann, M., Bono, E., Annaheim, H., Bleisch, M., & Graf‐Hausner, U. (2015) · SLAS TECHNOLOGY · doi:10.1177/2211068214567146 · Cited by 154
Chen, F., Lin, L., Zhang, J., He, Z., Uchiyama, K., & Lin, J. (2016) · Analytical Chemistry · doi:10.1021/acs.analchem.5b04749 · Cited by 153
Inkjet-like printing of single-cells
Yusof, A. M., Keegan, H., Spillane, C. D., Sheils, O. M., Martin, C. M., O’Leary, J. J., Zengerle, R., & Koltay, P. (2011) · Lab on a Chip · doi:10.1039/c1lc20176j · Cited by 151
Xie, H., Wang, Z., Zhang, L., Lei, Q., Zhao, A., Wang, H., Li, Q., Cao, Y., Zhang, W. J., & Chen, Z. (2017) · Scientific Reports · doi:10.1038/srep45622 · Cited by 151
Saijo, H., Igawa, K., Kanno, Y., Mori, Y., Kondo, K., Shimizu, K., Suzuki, S., Chikazu, D., Iino, M., Anzai, M., et al. (2009) · Journal of Artificial Organs · doi:10.1007/s10047-009-0462-7 · Cited by 147
4D Bioprinting: Technological Advances in Biofabrication
Yang, G. H., Yeo, M., Koo, Y. W., & Kim, G. (2019) · Macromolecular Bioscience · doi:10.1002/mabi.201800441 · Cited by 145
High-Throughput Production of Single-Cell Microparticles Using an Inkjet Printing Technology
Xu, T., Kincaid, H. A., Atala, A., & Yoo, J. J. (2008) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.2903064 · Cited by 140
Self-citationDirect Preparation and Loading of Lipid and Polymer Vesicles Using Inkjets
Hauschild, S., Lipprandt, U., Rumplecker, A., et al. (2005) · Small · doi:10.1002/smll.200500093 · Cited by 136
Cooper, G. M., Miller, E. D., DeCesare, G. E., Ūsas, A., Lensie, E. L., Bykowski, M. R., Huard, J., Weiss, L. E., Losee, J. E., & Campbell, P. G. (2009) · Tissue Engineering Part A · doi:10.1089/ten.tea.2009.0650 · Cited by 135
The Iron‐Fortified Adhesive System of Marine Mussels
Wilker, J. J. (2010) · Angewandte Chemie International Edition · doi:10.1002/anie.201003171 · Cited by 134
Barui, S., Chatterjee, S., Mandal, S., Kumar, A., & Basu, B. (2016) · Materials Science and Engineering C · doi:10.1016/j.msec.2016.09.040 · Cited by 130
Inkjet-Mediated Gene Transfection into Living Cells Combined with Targeted Delivery
Xu, T., Rohozinski, J., Zhao, W., Moorefield, E., Atala, A., & Yoo, J. J. (2008) · Tissue Engineering Part A · doi:10.1089/ten.tea.2008.0095 · Cited by 127
Self-citationOptimizing cell viability in droplet-based cell deposition
Hendriks, J., Visser, C. W., Henke, S., Leijten, J., Saris, D. B. F., Sun, C., Lohse, D., & Karperien, M. (2015) · Scientific Reports · doi:10.1038/srep11304 · Cited by 123
Microarray Technology and Its Applications
Müller, U. R., & Nicolau, D. V. (2005) · Biological and medical physics series · doi:10.1007/b137842 · Cited by 117
Miller, E. D., Fisher, G. W., Weiss, L. E., Walker, L. M., & Campbell, P. G. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2005.10.021 · Cited by 116
The future of drug-eluting stents
Kukreja, N., Onuma, Y., Daemen, J., & Serruys, P. W. J. C. (2008) · Pharmacological Research · doi:10.1016/j.phrs.2008.01.012 · Cited by 113
4D Biofabrication: Materials, Methods, and Applications
Ionov, L. (2018) · Advanced Healthcare Materials · doi:10.1002/adhm.201800412 · Cited by 113
Zhang, C., Wen, X., Vyavahare, N. R., & Boland, T. (2008) · Biomaterials · doi:10.1016/j.biomaterials.2008.06.009 · Cited by 110
Inkjet printing Schwann cells and neuronal analogue NG108-15 cells
Tse, C., Whiteley, R., Yu, T., Stringer, J., MacNeil, S., Haycock, J. W., & Smith, P. J. (2016) · Biofabrication · doi:10.1088/1758-5090/8/1/015017 · Cited by 110
Accelerated myotube formation using bioprinting technology for biosensor applications
Cui, X., Gao, G., & Qiu, Y. (2012) · Biotechnology Letters · doi:10.1007/s10529-012-1087-0 · Cited by 109
Engineering spatial control of multiple differentiation fates within a stem cell population
Ker, D. F. E., Chu, B., Phillippi, J. A., Gharaibeh, B., Huard, J., Weiss, L. E., & Campbell, P. G. (2011) · Biomaterials · doi:10.1016/j.biomaterials.2011.01.036 · Cited by 108
Workman, V. L., Tezera, L. B., Elkington, P. T., & Jayasinghe, S. N. (2014) · Advanced Functional Materials · doi:10.1002/adfm.201303891 · Cited by 108
A Step Toward Development of Printable Dosage Forms for Poorly Soluble Drugs
Raijada, D. K., Genina, N., Fors, D., Wisaeus, E., Peltonen, J. P. K., Rantanen, J., & Sandler, N. (2013) · Journal of Pharmaceutical Sciences · doi:10.1002/jps.23678 · Cited by 105
Effects of surfactant and gentle agitation on inkjet dispensing of living cells
Parsa, S., Gupta, M., Loizeau, F., & Cheung, K. C. (2010) · Biofabrication · doi:10.1088/1758-5082/2/2/025003 · Cited by 105
POSaM: a fast, flexible, open-source, inkjet oligonucleotide synthesizer and microarrayer
Lausted, C. G., Dahl, T. A., Warren, C., King, K., Smith, K. A., Johnson, M., Saleem, R. A., Aitchison, J. D., Hood, L., & Lasky, S. R. (2004) · Genome biology · doi:10.1186/gb-2004-5-8-r58 · Cited by 104
Freeform micropatterning of living cells into cell culture medium using direct inkjet printing
Park, J. A., Yoon, S., Kwon, J., Now, H., Kim, Y. K., Kim, W. J., Yoo, J.-Y., & Jung, S. (2017) · Scientific Reports · doi:10.1038/s41598-017-14726-w · Cited by 104
Quesenberry, P. J., Dooner, M. S., & Aliotta, J. M. (2010) · Experimental Hematology · doi:10.1016/j.exphem.2010.03.021 · Cited by 97
Shi, J., Wu, B., Li, S., Song, J., Song, B., & Lu, W. F. (2018) · Biomedical Physics & Engineering Express · doi:10.1088/2057-1976/aac946 · Cited by 95
Water-based 3D inkjet printing of an oral pharmaceutical dosage form
Cader, H. K., Rance, G. A., Alexander, M. R., Gonçalves, A. D., Roberts, C. J., Tuck, C. J., & Wildman, R. D. (2019) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2019.04.026 · Cited by 95
Patterned Hydrogel Substrates for Cell Culture with Electrohydrodynamic Jet Printing
Poellmann, M. J., Barton, K. L., Mishra, S., & Johnson, A. J. W. (2011) · Macromolecular Bioscience · doi:10.1002/mabi.201100004 · Cited by 94
Nishiyama, Y., Henmi, C., Iwanaga, S., Nakagawa, H., Yamaguchi, K., Akita, K., Mochizuki, S., Takiura, K., & Nakamura, M. (2008) · Journal of Imaging Science and Technology · doi:10.2352/j.imagingsci.technol.(2008)52:6(060201 · Cited by 94
Chahal, D., Ahmadi, A., & Cheung, K. C. (2012) · Biotechnology and Bioengineering · doi:10.1002/bit.24562 · Cited by 92
Current developments in multifunctional smart materials for 3D/4D bioprinting
Castro, N. J., Meinert, C., Levett, P. A., & Hutmacher, D. W. (2017) · Current Opinion in Biomedical Engineering · doi:10.1016/j.cobme.2017.04.002 · Cited by 92
Miller, E. D., Phillippi, J. A., Fisher, G. W., Campbell, P. G., Walker, L. M., & Weiss, L. E. (2009) · Combinatorial Chemistry & High Throughput Screening · doi:10.2174/138620709788681907 · Cited by 88
High throughput miniature drug-screening platform using bioprinting technology
Rodríguez-Dévora, J. I., Zhang, B., Reyna, D., Shi, Z., & Xu, T. (2012) · Biofabrication · doi:10.1088/1758-5082/4/3/035001 · Cited by 86
Self-citationMiller, E. D., Li, K., Takeo Kanade, A., Weiss, L. E., Walker, L. M., & Campbell, P. G. (2011) · Biomaterials · doi:10.1016/j.biomaterials.2010.12.005 · Cited by 82
Solis, L. H., Ayala-Marin, Y. M., Portillo, S., Varela-Ramírez, A., Aguilera, R. J., & Boland, T. (2019) · Biofabrication · doi:10.1088/1758-5090/ab25f9 · Cited by 82
Characterization of a newly developed chicken 44K Agilent microarray
Li, X., Chiang, H., Zhu, J. J., Dowd, S. E., & Zhou, H. (2008) · BMC Genomics · doi:10.1186/1471-2164-9-60 · Cited by 80
Self-citationSpatiotemporal control of growth factors in three-dimensional printed scaffolds
Bittner, S. M., Guo, J. L., & Mikos, A. G. (2018) · Bioprinting · doi:10.1016/j.bprint.2018.e00032 · Cited by 80
Inkjet Printing of Silk Nest Arrays for Cell Hosting
Suntivich, R., Drachuk, I. V., Calabrese, R., Kaplan, D. L., & Tsukruk, V. V. (2014) · Biomacromolecules · doi:10.1021/bm500027c · Cited by 79
“One Cell−One Well”: A New Approach to Inkjet Printing Single Cell Microarrays
Liberski, A. R., Delaney, J. T., & Schubert, U. S. (2010) · ACS Combinatorial Science · doi:10.1021/co100061c · Cited by 77
Bioprinting microvessels using an inkjet printer
Hewes, S. A., Wong, A. D., & Searson, P. C. (2017) · Bioprinting · doi:10.1016/j.bprint.2017.05.002 · Cited by 77
Barui, S., Panda, A. K., Naskar, S., Rajamanickam, K., Basu, S., & Basu, B. (2019) · Biomaterials · doi:10.1016/j.biomaterials.2019.05.023 · Cited by 74
Inkjet Printing Based Droplet Generation for Integrated Online Digital Polymerase Chain Reaction
Zhang, W., Li, N., Koga, D., Zhang, Y., Zeng, H., Nakajima, H., Lin, J., & Uchiyama, K. (2018) · Analytical Chemistry · doi:10.1021/acs.analchem.8b00463 · Cited by 73
Electrohydrodynamic jetting of mouse neuronal cells
Eagles, P. A. M., Qureshi, A., & Jayasinghe, S. N. (2006) · Biochemical Journal · doi:10.1042/bj20051838 · Cited by 72
In situ Synthesis of DNA Microarray on Functionalized Cyclic Olefin Copolymer Substrate
Saaem, I., Ma, K.-S., Marchi, A. N., et al. (2010) · ACS Applied Materials & Interfaces · doi:10.1021/am900884b · Cited by 72
Inkjet printing and cell seeding thermoreversible photocurable gel structures
Biase, M. D., Saunders, R., Tirelli, N., & Derby, B. (2011) · Soft Matter · doi:10.1039/c0sm00996b · Cited by 71
Investigation of the hydrodynamic response of cells in drop on demand piezoelectric inkjet nozzles
Cheng, E., Yu, H., Ahmadi, A., & Cheung, K. C. (2016) · Biofabrication · doi:10.1088/1758-5090/8/1/015008 · Cited by 69
Enabling Free-Standing 3D Hydrogel Microstructures with Microreactive Inkjet Printing
Teo, M. Y., Kee, S., RaviChandran, N., Stuart, L., Aw, K. C., & Stringer, J. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b17192 · Cited by 67
Synthetic multicellular cell-to-cell communication in inkjet printed bacterial cell systems
Choi, W. S., Ha, D., Park, S., & Kim, T. (2011) · Biomaterials · doi:10.1016/j.biomaterials.2010.12.014 · Cited by 65
Characterizing the effects of cell settling on bioprinter output
Pepper, M. E., Seshadri, V., Burg, T. C., Burg, K. J. L., & Groff, R. E. (2012) · Biofabrication · doi:10.1088/1758-5082/4/1/011001 · Cited by 65
Inkjet Printing Methodologies for Drug Screening
Arrabito, G. D., & Pignataro, B. (2010) · Analytical Chemistry · doi:10.1021/ac100169w · Cited by 65
Photocurable Bioink for the Inkjet 3D Pharming of Hydrophilic Drugs
Acosta‐Vélez, G. F., Linsley, C. S., Craig, M., & Wu, B. M. (2017) · Bioengineering · doi:10.3390/bioengineering4010011 · Cited by 65
Sun, Y., Zhou, X., & Yu, Y. (2014) · Lab on a Chip · doi:10.1039/c4lc00598h · Cited by 63
Xie, H., Wang, Z., Zhang, L., Lei, Q., Zhao, A., Wang, H., Li, Q., Chen, Z., & Zhang, W. (2016) · PeerJ · doi:10.7717/peerj.2040 · Cited by 63
Bayesian computer-aided experimental design of heterogeneous scaffolds for tissue engineering
Weiss, L. E., Amon, C. H., Finger, S., Miller, E. D., Romero, D. A., Verdinelli, I., Walker, L. M., & Campbell, P. G. (2005) · Computer-Aided Design · doi:10.1016/j.cad.2005.02.004 · Cited by 61
Bertlein, S., Hikimoto, D., Hochleitner, G., Hümmer, J., Jüngst, T., Matsusaki, M., Akashi, M., & Gröll, J. (2017) · Small · doi:10.1002/smll.201701521 · Cited by 60
Microencapsulation of cells in alginate through an electrohydrodynamic process
Gasperini, L., Maniglio, D., & Migliaresi, C. (2013) · Journal of Bioactive and Compatible Polymers · doi:10.1177/0883911513501599 · Cited by 55
Growth Factor Array Fabrication Using a Color Ink Jet Printer
Watanabe, K., Miyazaki, T., & Matsuda, R. (2003) · ZOOLOGICAL SCIENCE · doi:10.2108/zsj.20.429 · Cited by 51
Bioprinting exosome-like extracellular vesicle microenvironments
Yerneni, S. S., Whiteside, T. L., Weiss, L. E., & Campbell, P. G. (2019) · Bioprinting · doi:10.1016/j.bprint.2019.e00041 · Cited by 50
An integrated cell printing system for the construction of heterogeneous tissue models
Liu, T., Pang, Y., Zhou, Z., Yao, R., & Sun, W. (2019) · Acta Biomaterialia · doi:10.1016/j.actbio.2019.05.052 · Cited by 50
Single-cell PCR of genomic DNA enabled by automated single-cell printing for cell isolation
Stumpf, F., Schoendube, J., Gross, A., Rath, C., Niekrawietz, S., Koltay, P., & Roth, G. D. (2015) · Biosensors and Bioelectronics · doi:10.1016/j.bios.2015.03.008 · Cited by 49
Development and Biological Evaluation of Inkjet Printed Drug Coatings on Intravascular Stent
Scoutaris, N., Chai, F., Maurel, B., Sobocinski, J., Zhao, M., Moffat, J. G., Craig, D. Q. M., Martel, B., Blanchemain, N., & Douroumis, D. (2015) · Molecular Pharmaceutics · doi:10.1021/acs.molpharmaceut.5b00570 · Cited by 48
Making tablets for delivery of poorly soluble drugs using photoinitiated 3D inkjet printing
Clark, E. A., Alexander, M. R., Irvine, D. J., Roberts, C. J., Wallace, M. J., Yoo, J. S., & Wildman, R. D. (2019) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2019.118805 · Cited by 48
Improved Resolution and Fidelity of Droplet-Based Bioprinting by Upward Ejection
Ji, Y., Yang, Q., Huang, G., Shen, M., Jian, Z., Thoraval, M.-J., Lian, Q., Zhang, X., & Xu, F. (2019) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.9b00400 · Cited by 46
Self-citationMarangoni-driven spreading of miscible liquids in the binary pendant drop geometry
Koldeweij, R. B. J., van Capelleveen, B. F., Lohse, D., & Visser, C. W. (2019) · Soft Matter · doi:10.1039/c8sm02074d · Cited by 44
Xu, T., Olson, J. D., Zhao, W., et al. (2008) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.2902857 · Cited by 42
Self-citationPredictive compensation-enabled horizontal inkjet printing of alginate tubular constructs
Xu, C., Christensen, K., Zhang, Z., Huang, Y. H., Fu, J., & Markwald, R. R. (2013) · Manufacturing Letters · doi:10.1016/j.mfglet.2013.09.003 · Cited by 39
An oligonucleotide synthesizer based on a microreactor chip and an inkjet printer
Li, H., Huang, Y., Wei, Z., Wang, W., Yang, Z., Liang, Z., & Li, Z. (2019) · Scientific Reports · doi:10.1038/s41598-019-41519-0 · Cited by 39
Iwanaga, S., Saito, N., Sanae, H., & Nakamura, M. (2013) · Colloids and Surfaces B Biointerfaces · doi:10.1016/j.colsurfb.2013.04.007 · Cited by 38
Sohrabi, S., & Liu, Y. (2018) · Physical review. E · doi:10.1103/physreve.97.033105 · Cited by 36
Parzel, C. A., Pepper, M. E., Burg, T. C., Groff, R. E., & Burg, K. J. L. (2009) · Journal of Tissue Engineering and Regenerative Medicine · doi:10.1002/term.162 · Cited by 35
Precise Control of Osteogenesis for Craniofacial Defect Repair
Smith, D. M., Cray, J., Weiss, L. E., et al. (2012) · Annals of Plastic Surgery · doi:10.1097/sap.0b013e31824cfe64 · Cited by 34
Dou, R., Saunders, R., Mohamet, L., Ward, C. M., & Derby, B. (2015) · Lab on a Chip · doi:10.1039/c5lc00674k · Cited by 34
In Situ Printing-then-Mixing for Biological Structure Fabrication Using Intersecting Jets
Christensen, K., Compaan, A. M., Chai, W., Xia, G., & Huang, Y. H. (2017) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.7b00752 · Cited by 33
Jia, C., Luo, B., Wang, H., Bian, Y., Li, X., Li, S., & Wang, H. (2017) · Advanced Materials · doi:10.1002/adma.201701154 · Cited by 32
Self-citationThermal inkjet 3D powder printing of metals and alloys: Current status and challenges
Barui, S., Mandal, S., & Basu, B. (2017) · Current Opinion in Biomedical Engineering · doi:10.1016/j.cobme.2017.05.010 · Cited by 29
Park, T.-M., Kang, D., Jang, I., Yun, W., Shim, J., Jeong, Y. H., Kwak, J.-Y., Yoon, S., & Jin, S. (2017) · International Journal of Molecular Sciences · doi:10.3390/ijms18112348 · Cited by 25
Pakes, N. K., Jayasinghe, S. N., & Williams, R. S. B. (2011) · Journal of The Royal Society Interface · doi:10.1098/rsif.2010.0696 · Cited by 23
Droplet Enhanced Fluorescence for Ultrasensitive Detection Using Inkjet
Zeng, H., Katagiri, D., Ogino, T., Nakajima, H., Kato, S., & Uchiyama, K. (2016) · Analytical Chemistry · doi:10.1021/acs.analchem.6b01566 · Cited by 21
Fabrication of 3D Cell Supporting Structures With Multi-Materials Using the Bio-Printer
Nishiyama, Y., Nakamura, M., Henmi, C., Yamaguchi, K., Mochizuki, S., Nakagawa, H., & Takiura, K. (2007) · ASME International Manufacturing Science and Engineering Conference (MSEC) · doi:10.1115/msec2007-31064 · Cited by 15
Chitosan surface enhances the mobility, cytoplasm spreading, and phagocytosis of macrophages
Gu, Y., Zhang, W., Wang, H., & Lee, W. Y. (2014) · Colloids and Surfaces B Biointerfaces · doi:10.1016/j.colsurfb.2014.01.051 · Cited by 15
Acoustic Poration and Dynamic Healing of Mammalian Cell Membranes during Inkjet Printing
Barui, S., Saunders, R., Naskar, S., Basu, B., & Derby, B. (2019) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.9b01635 · Cited by 14
Cited by
Arif, Z. U., Khalid, M. Y., Noroozi, R., Sadeghianmaryan, A., Jalalvand, M., & Hossain, M. (2022) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2022.07.140 · Cited by 395
Unraveling of Advances in 3D-Printed Polymer-Based Bone Scaffolds
Xu, Y., Zhang, F., Zhai, W., Cheng, S., Li, J., & Wang, Y. (2022) · Polymers · doi:10.3390/polym14030566 · Cited by 349
Recent Advances in 3D Printing of Smart Scaffolds for Bone Tissue Engineering and Regeneration
Yuan, X., Zhu, W., Yang, Z., He, N., Chen, F., Han, X., & Zhou, K. (2024) · Advanced Materials · doi:10.1002/adma.202403641 · Cited by 339
Daly, A. C., Prendergast, M. E., Hughes, A. J., & Burdick, J. A. (2021) · Cell · doi:10.1016/j.cell.2020.12.002 · Cited by 332
In Situ 3D Bioprinting Living Photosynthetic Scaffolds for Autotrophic Wound Healing
Wang, X., Yang, C., Yu, Y., & Zhao, Y. (2022) · Research · doi:10.34133/2022/9794745 · Cited by 143
Metadata
- Authors
- Li, X., Liu, B., Pei, B., Chen, J., Zhou, D., Peng, J., Zhang, X., Jia, W., & Xu, T.
- Venue
- Chemical Reviews
- Publisher
- American Chemical Society (ACS)
- Published
- 2020-09-09
- Volume
- 120
- Issue
- 19
- Pages
- 10793-10833
- ISSN
- 0009-2665 (ISSN-L)
- 1520-6890
- OpenAlex
- W3084300836
- Cited by
- 686
- References
- 200
- FWCI
- 8.40
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.