The DOI matches its Crossref record; 255 of the 255 references it cites were found in a registry or an index.
Extrusion 3D Printing of Polymeric Materials with Advanced Properties
Open accessAbstract
3D printing is a rapidly growing technology that has an enormous potential to impact a wide range of industries such as engineering, art, education, medicine, and aerospace. The flexibility in design provided by this technique offers many opportunities for manufacturing sophisticated 3D devices. The most widely utilized method is an extrusion‐based solid‐freeform fabrication approach, which is an extremely attractive additive manufacturing technology in both academic and industrial research communities. This method is versatile, with the ability to print a range of dimensions, multimaterial, and multifunctional 3D structures. It is also a very affordable technique in prototyping. However, the lack of variety in printable polymers with advanced material properties becomes the main bottleneck in further development of this technology. Herein, a comprehensive review is provided, focusing on material design strategies to achieve or enhance the 3D printability of a range of polymers including thermoplastics, thermosets, hydrogels, and other polymers by extrusion techniques. Moreover, diverse advanced properties exhibited by such printed polymers, such as mechanical strength, conductance, self‐healing, as well as other integrated properties are highlighted. Lastly, the stimuli responsiveness of the 3D printed polymeric materials including shape morphing, degradability, and color changing is also discussed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
3D bioprinting of tissues and organs
Murphy, S. V., & Atala, A. (2014) · Nature Biotechnology · doi:10.1038/nbt.2958 · Cited by 7,034
Highly stretchable and tough hydrogels
Sun, J.-Y., Zhao, X., Illeperuma, W. R. K., Chaudhuri, O., Oh, K. H., Mooney, D. J., Vlassak, J. J., & Suo, Z. (2012) · Nature · doi:10.1038/nature11409 · Cited by 5,481
Polymers for 3D Printing and Customized Additive Manufacturing
Ligon, S. C., Liska, R., Stampfl, J., Gurr, M., & Mülhaupt, R. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00074 · Cited by 3,741
Skin-like pressure and strain sensors based on transparent elastic films of carbon nanotubes
Lipomi, D. J., Vosgueritchian, M., Tee, B. C.-K., Hellstrom, S. L., Lee, J. A., Fox, C. H., & Bao, Z. (2011) · Nature Nanotechnology · doi:10.1038/nnano.2011.184 · Cited by 3,188
Sydney Gladman, A., Matsumoto, E. A., Nuzzo, R. G., Mahadevan, L., & Lewis, J. A. (2016) · Nature Materials · doi:10.1038/nmat4544 · Cited by 3,027
Brunsveld, L., Folmer, B. J. B., Meijer, E. W., & Sijbesma, R. P. (2001) · Chemical Reviews · doi:10.1021/cr990125q · Cited by 3,006
Advances in engineering hydrogels
Zhang, Y. S., & Khademhosseini, A. (2017) · Science · doi:10.1126/science.aaf3627 · Cited by 2,908
Printing ferromagnetic domains for untethered fast-transforming soft materials
Kim, Y., Yuk, H., Zhao, R., Chester, S. A., & Zhao, X. (2018) · Nature · doi:10.1038/s41586-018-0185-0 · Cited by 2,183
An integrated design and fabrication strategy for entirely soft, autonomous robots
Wehner, M., Truby, R. L., Fitzgerald, D. J., Mosadegh, B., Whitesides, G. M., Lewis, J. A., & Wood, R. J. (2016) · Nature · doi:10.1038/nature19100 · Cited by 2,127
Physical hydrogels composed of polyampholytes demonstrate high toughness and viscoelasticity
Sun, T. L., Kurokawa, T., Kuroda, S., Ihsan, A. B., Akasaki, T., Sato, K., Haque, M. A., Nakajima, T., & Gong, J. P. (2013) · Nature Materials · doi:10.1038/nmat3713 · Cited by 2,089
Derby, B. (2010) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-070909-104502 · Cited by 1,984
Designing Cell-Compatible Hydrogels for Biomedical Applications
Seliktar, D. (2012) · Science · doi:10.1126/science.1214804 · Cited by 1,923
25th Anniversary Article: Engineering Hydrogels for Biofabrication
Malda, J., Visser, J., Melchels, F. P., Jüngst, T., Hennink, W. E., Dhert, W. J. A., Groll, J., & Hutmacher, D. W. (2013) · Advanced Materials · doi:10.1002/adma.201302042 · Cited by 1,901
The Polyrotaxane Gel: A Topological Gel by Figure-of-Eight Cross-links
Okumura, Y., & Ito, K. (2001) · Advanced Materials · doi:10.1002/1521-4095(200104)13:7<485::aid-adma485>3.0.co;2-t · Cited by 1,848
Hinton, T. J., Jallerat, Q., Palchesko, R. N., Park, J. H., Grodzicki, M. S., Shue, H.-J., Ramadan, M. H., Hudson, A. R., & Feinberg, A. W. (2015) · Science Advances · doi:10.1126/sciadv.1500758 · Cited by 1,805
Photodegradable Hydrogels for Dynamic Tuning of Physical and Chemical Properties
Kloxin, A. M., Kasko, A. M., Salinas, C. N., & Anseth, K. S. (2009) · Science · doi:10.1126/science.1169494 · Cited by 1,748
Evaluation of 3D Printing and Its Potential Impact on Biotechnology and the Chemical Sciences
Gross, B. C., Erkal, J. L., Lockwood, S. Y., Chen, C., & Spence, D. M. (2014) · Analytical Chemistry · doi:10.1021/ac403397r · Cited by 1,746
Direct Ink Writing of 3D Functional Materials
Lewis, J. A. (2006) · Advanced Functional Materials · doi:10.1002/adfm.200600434 · Cited by 1,740
3D printing with polymers: Challenges among expanding options and opportunities
Stansbury, J. W., & Idacavage, M. J. (2016) · Dental Materials · doi:10.1016/j.dental.2015.09.018 · Cited by 1,732
Ning, F., Cong, W., Qiu, J., Wei, J., & Wang, S. (2015) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2015.06.013 · Cited by 1,718
Using the dynamic bond to access macroscopically responsive structurally dynamic polymers
Wojtecki, R. J., Meador, M. A., & Rowan, S. J. (2011) · Nature Materials · doi:10.1038/nmat2891 · Cited by 1,636
3D‐Printing of Lightweight Cellular Composites
Compton, B. G., & Lewis, J. A. (2014) · Advanced Materials · doi:10.1002/adma.201401804 · Cited by 1,626
Printing soft matter in three dimensions
Truby, R. L., & Lewis, J. A. (2016) · Nature · doi:10.1038/nature21003 · Cited by 1,622
Embedded 3D Printing of Strain Sensors within Highly Stretchable Elastomers
Muth, J. T., Vogt, D. M., Truby, R. L., Mengüç, Y., Kolesky, D. B., Wood, R. J., & Lewis, J. A. (2014) · Advanced Materials · doi:10.1002/adma.201400334 · Cited by 1,611
Current advances and future perspectives in extrusion-based bioprinting
Ozbolat, I. T., & Hospodiuk, M. (2016) · Biomaterials · doi:10.1016/j.biomaterials.2015.10.076 · Cited by 1,572
A highly stretchable autonomous self-healing elastomer
Li, C.-H., Wang, C., Keplinger, C., Zuo, J.-L., Jin, L., Sun, Y., Zheng, P., Cao, Y., Lissel, F., Linder, C., et al. (2016) · Nature Chemistry · doi:10.1038/nchem.2492 · Cited by 1,496
Mohamed, O. A., Masood, S. H., & Bhowmik, J. L. (2015) · Advances in Manufacturing · doi:10.1007/s40436-014-0097-7 · Cited by 1,481
Applications of Orthogonal “Click” Chemistries in the Synthesis of Functional Soft Materials
Iha, R. K., Wooley, K. L., Nyström, A. M., Burke, D. J., Kade, M. J., & Hawker, C. J. (2009) · Chemical Reviews · doi:10.1021/cr900138t · Cited by 1,468
3D Printing of Interdigitated Li‐Ion Microbattery Architectures
Sun, K., Wei, T., Ahn, B. Y., Seo, J. Y., Dillon, S. J., & Lewis, J. A. (2013) · Advanced Materials · doi:10.1002/adma.201301036 · Cited by 1,341
Taylor, D. L., & in het Panhuis, M. (2016) · Advanced Materials · doi:10.1002/adma.201601613 · Cited by 1,340
Sun, J., Keplinger, C., Whitesides, G. M., & Suo, Z. (2014) · Advanced Materials · doi:10.1002/adma.201403441 · Cited by 1,198
Advances in 4D Printing: Materials and Applications
Kuang, X., Roach, D. J., Wu, J., Hamel, C. M., Ding, Z., Wang, T., Dunn, M. L., & Qi, H. J. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201805290 · Cited by 1,095
A 3D-printed, functionally graded soft robot powered by combustion
Bartlett, N. W., Tolley, M. T., Overvelde, J. T. B., Weaver, J. C., Mosadegh, B., Bertoldi, K., Whitesides, G. M., & Wood, R. J. (2015) · Science · doi:10.1126/science.aab0129 · Cited by 1,052
Direct 3D Printing of Shear‐Thinning Hydrogels into Self‐Healing Hydrogels
Highley, C. B., Rodell, C. B., & Burdick, J. A. (2015) · Advanced Materials · doi:10.1002/adma.201501234 · Cited by 1,043
3D bioprinting for biomedical devices and tissue engineering: A review of recent trends and advances
Derakhshanfar, S., Mbeleck, R., Xu, K., Zhang, X., Zhong, W., & Xing, M. (2018) · Bioactive Materials · doi:10.1016/j.bioactmat.2017.11.008 · Cited by 1,027
All solid-state polymer electrolytes for high-performance lithium ion batteries
Yue, L., Ma, J., Zhang, J., Zhao, J., Dong, S., Liu, Z., Cui, G., & Chen, L. (2016) · Energy Storage Materials · doi:10.1016/j.ensm.2016.07.003 · Cited by 1,020
Dynamic Covalent Polymer Networks: from Old Chemistry to Modern Day Innovations
Zou, W., Dong, J., Luo, Y., Zhao, Q., & Xie, T. (2017) · Advanced Materials · doi:10.1002/adma.201606100 · Cited by 1,014
Dynamic Covalent Bonds in Polymeric Materials
Chakma, P., & Konkolewicz, D. (2019) · Angewandte Chemie International Edition · doi:10.1002/anie.201813525 · Cited by 1,014
Multiprocess 3D printing for increasing component functionality
MacDonald, E., & Wicker, R. (2016) · Science · doi:10.1126/science.aaf2093 · Cited by 961
Lin, P., Ma, S., Wang, X., & Zhou, F. (2015) · Advanced Materials · doi:10.1002/adma.201405022 · Cited by 915
3D printing of smart materials: A review on recent progresses in 4D printing
Khoo, Z. X., Teoh, J. E. M., Liu, Y., Chua, C. K., Yang, S., An, J., Leong, K. F., & Yeong, W. Y. (2015) · Virtual and Physical Prototyping · doi:10.1080/17452759.2015.1097054 · Cited by 912
Shear-thinning hydrogels for biomedical applications
Guvendiren, M., Lu, H. D., & Burdick, J. A. (2012) · Soft Matter · doi:10.1039/c1sm06513k · Cited by 911
Mouldable liquid-crystalline elastomer actuators with exchangeable covalent bonds
Pei, Z., Yang, Y., Chen, Q., Terentjev, E. M., Wei, Y., & Ji, Y. (2014) · Nature Materials · doi:10.1038/nmat3812 · Cited by 886
Designing Responsive Buckled Surfaces by Halftone Gel Lithography
Kim, J., Hanna, J. A., Byun, M., Santangelo, C. D., & Hayward, R. C. (2012) · Science · doi:10.1126/science.1215309 · Cited by 883
3D Printing of Highly Stretchable and Tough Hydrogels into Complex, Cellularized Structures
Hong, S., Sycks, D., Chan, H. F., Lin, S., Lopez, G. P., Guilak, F., Leong, K. W., & Zhao, X. (2015) · Advanced Materials · doi:10.1002/adma.201501099 · Cited by 873
Soft material for soft actuators
Miriyev, A., Stack, K., & Lipson, H. (2017) · Nature Communications · doi:10.1038/s41467-017-00685-3 · Cited by 861
PDMS with designer functionalities—Properties, modifications strategies, and applications
Wolf, M. P., Salieb-Beugelaar, G. B., & Hunziker, P. (2018) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2018.06.001 · Cited by 853
Whitesides, G. M. (2018) · Angewandte Chemie International Edition · doi:10.1002/anie.201800907 · Cited by 850
Dai, X., Zhang, Y., Gao, L., Bai, T., Wang, W., Cui, Y., & Liu, W. (2015) · Advanced Materials · doi:10.1002/adma.201500534 · Cited by 848
Shao, C., Wang, M., Meng, L., Chang, H., Wang, B., Xu, F., Yang, J., & Wan, P. (2018) · Chemistry of Materials · doi:10.1021/acs.chemmater.8b01172 · Cited by 783
Qin, Y., Peng, Q., Ding, Y., Lin, Z., Wang, C., Li, Y., Xu, F., Li, J., Yuan, Y., He, X., et al. (2015) · ACS Nano · doi:10.1021/acsnano.5b02781 · Cited by 775
Zhang, Q., Shi, C.-Y., Qu, D.-H., Long, Y.-T., Feringa, B. L., & Tian, H. (2018) · Science Advances · doi:10.1126/sciadv.aat8192 · Cited by 771
3D printing of liquid crystal elastomeric actuators with spatially programed nematic order
Kotikian, A., Truby, R. L., Boley, J. W., White, T. J., & Lewis, J. A. (2018) · Advanced Materials · doi:10.1002/adma.201706164 · Cited by 768
Graphene Oxide‐Based Electrode Inks for 3D‐Printed Lithium‐Ion Batteries
Fu, K., Wang, Y., Yan, C., Yao, Y., Chen, Y., Dai, J., Lacey, S., Wang, Y., Wan, J., Li, T., et al. (2016) · Advanced Materials · doi:10.1002/adma.201505391 · Cited by 758
Expansion–contraction of photoresponsive artificial muscle regulated by host–guest interactions
Takashima, Y., Hatanaka, S., Otsubo, M., Nakahata, M., Kakuta, T., Hashidzume, A., Yamaguchi, H., & Harada, A. (2012) · Nature Communications · doi:10.1038/ncomms2280 · Cited by 725
Short fiber reinforced composites for fused deposition modeling
Zhong, W., Li, F., Zhang, Z., Song, L., & Li, Z. (2001) · Materials Science and Engineering: A · doi:10.1016/s0921-5093(00)01810-4 · Cited by 721
Strategies and Molecular Design Criteria for 3D Printable Hydrogels
Jungst, T., Smolan, W., Schacht, K., Scheibel, T., & Groll, J. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.5b00303 · Cited by 712
Jakus, A. E., Secor, E. B., Rutz, A. L., Jordan, S. W., Hersam, M. C., & Shah, R. N. (2015) · ACS Nano · doi:10.1021/acsnano.5b01179 · Cited by 710
Enhanced Differentiation of Human Neural Stem Cells into Neurons on Graphene
Park, S. Y., Park, J., Sim, S. H., Sung, M. G., Kim, K. S., Hong, B. H., & Hong, S. (2011) · Advanced Materials · doi:10.1002/adma.201101503 · Cited by 703
Functional Block Copolymers: Nanostructured Materials with Emerging Applications
Schacher, F. H., Rupar, P. A., & Manners, I. (2012) · Angewandte Chemie International Edition · doi:10.1002/anie.201200310 · Cited by 694
Direct 4D Printing Via Active Composite Materials
Ding, Z., Yuan, C., Peng, X., Wang, T., Qi, H. J., & Dunn, M. L. (2017) · Science Advances · doi:10.1126/sciadv.1602890 · Cited by 692
Hybrid 3D Printing of Soft Electronics
Valentine, A. D., Busbee, T. A., Boley, J. W., Raney, J. R., Chortos, A., Kotikian, A., Berrigan, J. D., Durstock, M. F., & Lewis, J. A. (2017) · Advanced Materials · doi:10.1002/adma.201703817 · Cited by 688
Hydrogel-based actuators: possibilities and limitations
Ionov, L. (2014) · Materials Today · doi:10.1016/j.mattod.2014.07.002 · Cited by 680
Oppositely Charged Polyelectrolytes Form Tough, Self‐Healing, and Rebuildable Hydrogels
Luo, F., Sun, T. L., Nakajima, T., Kurokawa, T., Zhao, Y., Sato, K., Ihsan, A. B., Li, X., Guo, H., & Gong, J. P. (2015) · Advanced Materials · doi:10.1002/adma.201500140 · Cited by 664
Song, Y., Liu, Y., Qi, T., & Li, G. L. (2018) · Angewandte Chemie International Edition · doi:10.1002/anie.201807622 · Cited by 646
Self-healing electronic skins for aquatic environments
Cao, Y., Tan, Y. J., Li, S., Lee, W. W., Guo, H., Cai, Y., Wang, C., & Tee, B. C.-K. (2019) · Nature Electronics · doi:10.1038/s41928-019-0206-5 · Cited by 643
Yang, Y., Wang, X., Yang, F., Shen, H., & Wu, D. (2016) · Advanced Materials · doi:10.1002/adma.201601742 · Cited by 637
Bates, C. M., Maher, M. J., Janes, D. W., Ellison, C. J., & Willson, C. G. (2014) · Macromolecules · doi:10.1021/ma401762n · Cited by 634
Muscle‐Inspired Highly Anisotropic, Strong, Ion‐Conductive Hydrogels
Kong, W., Wang, C., Jia, C., Kuang, Y., Pastel, G., Chen, C., Chen, G., He, S., Huang, H., Zhang, J., et al. (2018) · Advanced Materials · doi:10.1002/adma.201801934 · Cited by 625
3D Printing of Shear-Thinning Hyaluronic Acid Hydrogels with Secondary Cross-Linking
Ouyang, L., Highley, C. B., Rodell, C. B., Sun, W., & Burdick, J. A. (2016) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.6b00158 · Cited by 607
Farahani, R. D., Dubé, M., & Therriault, D. (2016) · Advanced Materials · doi:10.1002/adma.201506215 · Cited by 604
Weak Hydrogen Bonding Enables Hard, Strong, Tough, and Elastic Hydrogels
Hu, X., Vatankhah‐Varnoosfaderani, M., Zhou, J., Li, Q., & Sheiko, S. S. (2015) · Advanced Materials · doi:10.1002/adma.201503724 · Cited by 596
Biodegradable and electrically conducting polymers for biomedical applications
Guo, B., Glavas, L., & Albertsson, A.-C. (2013) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2013.06.003 · Cited by 592
Soft Somatosensitive Actuators via Embedded 3D Printing
Truby, R. L., Wehner, M., Grosskopf, A. K., Vogt, D. M., Uzel, S. G. M., Wood, R. J., & Lewis, J. A. (2018) · Advanced Materials · doi:10.1002/adma.201706383 · Cited by 586
Zhang, Z. P., Rong, M. Z., & Zhang, M. Q. (2018) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2018.03.002 · Cited by 586
Shear-thinning and self-healing hydrogels as injectable therapeutics and for 3D-printing
Loebel, C., Rodell, C. B., Chen, M. H., & Burdick, J. A. (2017) · Nature Protocols · doi:10.1038/nprot.2017.053 · Cited by 565
Deng, Z., Guo, Y., Zhao, X., Ma, P. X., & Guo, B. (2018) · Chemistry of Materials · doi:10.1021/acs.chemmater.8b00008 · Cited by 563
Novel Materials for 3D Printing by Photopolymerization
Layani, M., Wang, X., & Magdassi, S. (2018) · Advanced Materials · doi:10.1002/adma.201706344 · Cited by 561
Yang, Y., Song, X., Li, X., Chen, Z., Zhou, C., Zhou, Q., & Chen, Y. (2018) · Advanced Materials · doi:10.1002/adma.201706539 · Cited by 538
Rapid energy-efficient manufacturing of polymers and composites via frontal polymerization
Robertson, I. D., Yourdkhani, M., Centellas, P. J., Aw, J. E., Ivanoff, D. G., Goli, E., Lloyd, E. M., Dean, L. M., Sottos, N. R., Geubelle, P. H., et al. (2018) · Nature · doi:10.1038/s41586-018-0054-x · Cited by 527
3D Printing of Highly Stretchable, Shape-Memory, and Self-Healing Elastomer toward Novel 4D Printing
Kuang, X., Chen, K., Dunn, C. K., Wu, J., Li, V. C. F., & Qi, H. J. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b18265 · Cited by 523
3D printing of robotic soft actuators with programmable bioinspired architectures
Schaffner, M., Faber, J. A., Pianegonda, L., Rühs, P. A., Coulter, F., & Studart, A. R. (2018) · Nature Communications · doi:10.1038/s41467-018-03216-w · Cited by 518
Fast‐Response, Stiffness‐Tunable Soft Actuator by Hybrid Multimaterial 3D Printing
Zhang, Y., Zhang, N., Hingorani, H., Ding, N., Wang, D., Yuan, C., Zhang, B., Gu, G., & Ge, Q. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201806698 · Cited by 513
Four-dimensional printing of liquid crystal elastomers
Ambulo, C. P., Burroughs, J. J., Boothby, J. M., Kim, H., Shankar, M. R., & Ware, T. H. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b11851 · Cited by 508
3D Printing of Emulsions and Foams into Hierarchical Porous Ceramics
Minas, C., Carnelli, D., Tervoort, E., & Studart, A. R. (2016) · Advanced Materials · doi:10.1002/adma.201603390 · Cited by 507
Wei, H., Zhang, Q., Yao, Y., Liu, L., Liu, Y., & Leng, J. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b12824 · Cited by 504
Extrusion Bioprinting of Shear‐Thinning Gelatin Methacryloyl Bioinks
Liu, W., Heinrich, M. A., Zhou, Y., Akpek, A., Hu, N., Liu, X., Guan, X., Zhong, Z., Jin, X., Khademhosseini, A., et al. (2017) · Advanced Healthcare Materials · doi:10.1002/adhm.201601451 · Cited by 503
4D Biofabrication Using Shape‐Morphing Hydrogels
Kirillova, A., Maxson, R., Stoychev, G., Gomillion, C. T., & Ionov, L. (2017) · Advanced Materials · doi:10.1002/adma.201703443 · Cited by 494
Ultrafast Digital Printing toward 4D Shape Changing Materials
Huang, L., Jiang, R., Wu, J., Song, J., Bai, H., Li, B., Zhao, Q., & Xie, T. (2017) · Advanced Materials · doi:10.1002/adma.201605390 · Cited by 490
3D Printed Photoresponsive Devices Based on Shape Memory Composites
Yang, H., Leow, W. R., Wang, T., Wang, J., Yu, J., He, K., Qi, D., Wan, C., & Chen, X. (2017) · Advanced Materials · doi:10.1002/adma.201701627 · Cited by 483
3D Printable Graphene Composite
Wei, X., Li, D., Jiang, W., Gu, Z., Wang, X., Zhang, Z., & Sun, Z. (2015) · Scientific Reports · doi:10.1038/srep11181 · Cited by 481
Christ, J. F., Aliheidari, N., Ameli, A., & Pötschke, P. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.06.011 · Cited by 481
Progress in 3D Printing of Carbon Materials for Energy‐Related Applications
Fu, K., Yao, Y., Dai, J., & Hu, L. (2017) · Advanced Materials · doi:10.1002/adma.201603486 · Cited by 475
Recyclable 3D printing of vitrimer epoxy
Shi, Q., Yu, K., Kuang, X., Mu, X., Dunn, C. K., Dunn, M. L., Wang, T., & Jerry Qi, H. (2017) · Materials Horizons · doi:10.1039/c7mh00043j · Cited by 460
Lu, W., Le, X., Zhang, J., Huang, Y., & Chen, T. (2017) · Chemical Society Reviews · doi:10.1039/c6cs00754f · Cited by 459
Multifunctional Nanostructured Conductive Polymer Gels: Synthesis, Properties, and Applications
Zhao, F., Shi, Y., Pan, L., & Yu, G. (2017) · Accounts of Chemical Research · doi:10.1021/acs.accounts.7b00191 · Cited by 457
Highly Elastic and Ultratough Hybrid Ionic–Covalent Hydrogels with Tunable Structures and Mechanics
Yang, Y., Wang, X., Yang, F., Wang, L., & Wu, D. (2018) · Advanced Materials · doi:10.1002/adma.201707071 · Cited by 449
Reversible patterning and actuation of hydrogels by electrically assisted ionoprinting
Palleau, E., Morales, D., Dickey, M. D., & Velev, O. D. (2013) · Nature Communications · doi:10.1038/ncomms3257 · Cited by 445
50th Anniversary Perspective: Polymer Functionalization
Blasco, E., Sims, M. B., Goldmann, A. S., Sumerlin, B. S., & Barner-Kowollik, C. (2017) · Macromolecules · doi:10.1021/acs.macromol.7b00465 · Cited by 437
3D printing for soft robotics – a review
Gul, J. Z., Sajid, M., Rehman, M. M., Siddiqui, G. U., Shah, I., Kim, K.-H., Lee, J.-W., & Choi, K. H. (2018) · Science and Technology of Advanced Materials · doi:10.1080/14686996.2018.1431862 · Cited by 428
3D printing of bacteria into functional complex materials
Schaffner, M., Rühs, P. A., Coulter, F., Kilcher, S., & Studart, A. R. (2017) · Science Advances · doi:10.1126/sciadv.aao6804 · Cited by 425
Li, C., Faulkner‐Jones, A., Dun, A. R., Jin, J., Chen, P., Xing, Y., Yang, Z., Li, Z., Shu, W., Liu, D., et al. (2015) · Angewandte Chemie International Edition · doi:10.1002/anie.201411383 · Cited by 423
3D Printing of Transparent and Conductive Heterogeneous Hydrogel–Elastomer Systems
Tian, K., Bae, J., Bakarich, S. E., Yang, C., Gately, R. D., Spinks, G. M., in het Panhuis, M., Suo, Z., & Vlassak, J. J. (2017) · Advanced Materials · doi:10.1002/adma.201604827 · Cited by 419
Chen, Q., Mangadlao, J. D., Wallat, J., De Leon, A., Pokorski, J. K., & Advincula, R. C. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b11793 · Cited by 415
4D printing of polymeric materials for tissue and organ regeneration
Miao, S., Castro, N., Nowicki, M., Xia, L., Cui, H., Zhou, X., Zhu, W., Lee, S.-J., Sarkar, K., Vozzi, G., et al. (2017) · Materials Today · doi:10.1016/j.mattod.2017.06.005 · Cited by 408
3D Printing of Multifunctional Hydrogels
Chen, Z., Zhao, D., Liu, B., Nian, G., Li, X., Yin, J., Qu, S., & Yang, W. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201900971 · Cited by 398
Zheng, S. Y., Ding, H., Qian, J., Yin, J., Wu, Z. L., Song, Y., & Zheng, Q. (2016) · Macromolecules · doi:10.1021/acs.macromol.6b02150 · Cited by 392
Chen, H., Ma, X., Wu, S., & Tian, H. (2014) · Angewandte Chemie International Edition · doi:10.1002/anie.201407402 · Cited by 390
Molecularly-engineered, 4D-printed liquid crystal elastomer actuators
Saed, M. O., Ambulo, C. P., Kim, H., De, R., Raval, V., Searles, K., Siddiqui, D. A., Cue, J. M. O., Stefan, M. C., Shankar, M. R., et al. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201806412 · Cited by 383
Three-Dimensional Printed Thermal Regulation Textiles
Gao, T., Yang, Z., Chen, C., Li, Y., Fu, K., Dai, J., Hitz, E. M., Xie, H., Liu, B., Song, J., et al. (2017) · ACS Nano · doi:10.1021/acsnano.7b06295 · Cited by 378
Three-dimensional printing of hierarchical liquid-crystal-polymer structures
Gantenbein, S., Masania, K., Woigk, W., Sesseg, J. P. W., Tervoort, T. A., & Studart, A. R. (2018) · Nature · doi:10.1038/s41586-018-0474-7 · Cited by 377
Haque, M. A., Kurokawa, T., Kamita, G., & Gong, J. P. (2011) · Macromolecules · doi:10.1021/ma201653t · Cited by 373
4D Printed Actuators with Soft-Robotic Functions
López‐Valdeolivas, M., Liu, D., Broer, D. J., & Sánchez‐Somolinos, C. (2018) · Macromolecular Rapid Communications · doi:10.1002/marc.201700710 · Cited by 371
Shear-Thinning and Thermo-Reversible Nanoengineered Inks for 3D Bioprinting
Wilson, S. A., Cross, L. M., Peak, C. W., & Gaharwar, A. K. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b13602 · Cited by 369
A rigid and healable polymer cross-linked by weak but abundant Zn(II)-carboxylate interactions
Lai, J.-C., Li, L., Wang, D.-P., Zhang, M.-H., Mo, S.-R., Wang, X., Zeng, K.-Y., Li, C.-H., Jiang, Q., You, X.-Z., et al. (2018) · Nature Communications · doi:10.1038/s41467-018-05285-3 · Cited by 354
3D-Printable Bioactivated Nanocellulose–Alginate Hydrogels
Leppiniemi, J., Lahtinen, P., Paajanen, A., Mahlberg, R., Metsä-Kortelainen, S., Pinomaa, T., Pajari, H., Vikholm-Lundin, I., Pursula, P., & Hytönen, V. P. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b02756 · Cited by 347
An overview of the suitability of hydrogel-forming polymers for extrusion-based 3D-printing
Kirchmajer, D. M., Gorkin III, R., & in het Panhuis, M. (2015) · Journal of Materials Chemistry B · doi:10.1039/c5tb00393h · Cited by 337
Löwenberg, C., Balk, M., Wischke, C., Behl, M., & Lendlein, A. (2017) · Accounts of Chemical Research · doi:10.1021/acs.accounts.6b00584 · Cited by 335
Gao, F., Xu, Z., Liang, Q., Liu, B., Li, H., Wu, Y., Zhang, Y., Lin, Z., Wu, M., Ruan, C., et al. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201706644 · Cited by 330
Programming 2D/3D shape-shifting with hobbyist 3D printers
van Manen, T., Janbaz, S., & Zadpoor, A. A. (2017) · Materials Horizons · doi:10.1039/c7mh00269f · Cited by 321
Roach, D. J., Yuan, C., Kuang, X., Li, V. C.-F., Blake, P., Romero, M. L., Hammel, I., Yu, K., & Qi, H. J. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b04401 · Cited by 319
Lewicki, J. P., Rodriguez, J. N., Zhu, C., Worsley, M. A., Wu, A. S., Kanarska, Y., Horn, J. D., Duoss, E. B., Ortega, J. M., Elmer, W., et al. (2017) · Scientific Reports · doi:10.1038/srep43401 · Cited by 318
Direct-Ink-Write 3D Printing of Hydrogels into Biomimetic Soft Robots
Cheng, Y., Chan, K. H., Wang, X.-Q., Ding, T., Li, T., Lu, X., & Ho, G. W. (2019) · ACS Nano · doi:10.1021/acsnano.9b06144 · Cited by 312
Digitally Tunable Microfluidic Bioprinting of Multilayered Cannular Tissues
Pi, Q., Maharjan, S., Yan, X., Liu, X., Singh, B., van Genderen, A. M., Robledo‐Padilla, F., Parra‐Saldivar, R., Hu, N., Jia, W., et al. (2018) · Advanced Materials · doi:10.1002/adma.201706913 · Cited by 305
Functional Gels Based on Chemically Modified Graphenes
Li, C., & Shi, G. (2014) · Advanced Materials · doi:10.1002/adma.201306104 · Cited by 300
Kesti, M., Müller, M., Becher, J., Schnabelrauch, M., D’Este, M., Eglin, D., & Zenobi-Wong, M. (2015) · Acta Biomaterialia · doi:10.1016/j.actbio.2014.09.033 · Cited by 294
Polyelectrolyte gelatin-chitosan hydrogel optimized for 3D bioprinting in skin tissue engineering
Ng, W. L., Yeong, W. Y., & Naing, M. W. (2024) · International Journal of Bioprinting · doi:10.18063/ijb.2016.01.009 · Cited by 293
Transformer Hydrogels: A Review
Erol, O., Pantula, A., Liu, W., & Gracias, D. H. (2019) · Advanced Materials Technologies · doi:10.1002/admt.201900043 · Cited by 293
A multifunctional skin-like sensor based on a 3D printed thermo-responsive hydrogel
Lei, Z., Wang, Q., & Wu, P. (2017) · Materials Horizons · doi:10.1039/c7mh00262a · Cited by 288
Chen, Q., Yan, X., Zhu, L., Chen, H., Jiang, B., Wei, D., Huang, L., Yang, J., Liu, B., & Zheng, J. (2016) · Chemistry of Materials · doi:10.1021/acs.chemmater.6b01920 · Cited by 284
Davidson, E. C., Kotikian, A., Li, S., Aizenberg, J., & Lewis, J. A. (2020) · Advanced Materials · doi:10.1002/adma.201905682 · Cited by 284
3D Laser Micro‐ and Nanoprinting: Challenges for Chemistry
Barner‐Kowollik, C., Bastmeyer, M., Blasco, E., Delaittre, G., Müller, P., Richter, B., & Wegener, M. (2017) · Angewandte Chemie International Edition · doi:10.1002/anie.201704695 · Cited by 280
3D-Printed Mechanochromic Materials
Peterson, G. I., Larsen, M. B., Ganter, M. A., Storti, D. W., & Boydston, A. J. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/am506745m · Cited by 273
Origami and 4D printing of elastomer-derived ceramic structures
Liu, G., Zhao, Y., Wu, G., & Lu, J. (2018) · Science Advances · doi:10.1126/sciadv.aat0641 · Cited by 270
Photodegradable Macromers and Hydrogels for Live Cell Encapsulation and Release
Griffin, D. R., & Kasko, A. M. (2012) · Journal of the American Chemical Society · doi:10.1021/ja305280w · Cited by 264
Xu, W., Molino, B. Z., Cheng, F., Molino, P. J., Yue, Z., Su, D., Wang, X., Willför, S., Xu, C., & Wallace, G. G. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b21268 · Cited by 263
Advanced Polymer Designs for Direct‐Ink‐Write 3D Printing
Li, L., Lin, Q., Tang, M., Duncan, A. J. E., & Ke, C. (2019) · Chemistry – A European Journal · doi:10.1002/chem.201900975 · Cited by 258
3D printing of a mechanically durable superhydrophobic porous membrane for oil–water separation
Lv, J., Gong, Z., He, Z., Yang, J., Chen, Y., Tang, C., Liu, Y., Fan, M., & Lau, W.-M. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta02202f · Cited by 257
3D Printing Sulfur Copolymer‐Graphene Architectures for Li‐S Batteries
Shen, K., Mei, H., Li, B., Ding, J., & Yang, S. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201701527 · Cited by 256
Biomaterials-based 3D cell printing for next-generation therapeutics and diagnostics
Jang, J., Park, J. Y., Gao, G., & Cho, D.-W. (2018) · Biomaterials · doi:10.1016/j.biomaterials.2017.11.030 · Cited by 254
3D Bioprinting of Highly Thixotropic Alginate/Methylcellulose Hydrogel with Strong Interface Bonding
Li, H., Tan, Y. J., Leong, K. F., & Li, L. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b04216 · Cited by 250
Supramolecular Lego Assembly Towards Three‐Dimensional Multi‐Responsive Hydrogels
Ma, C., Li, T., Zhao, Q., Yang, X., Wu, J., Luo, Y., & Xie, T. (2014) · Advanced Materials · doi:10.1002/adma.201402026 · Cited by 249
Additive Manufacturing as a Method to Design and Optimize Bioinspired Structures
Velasco‐Hogan, A., Xu, J., & Meyers, M. A. (2018) · Advanced Materials · doi:10.1002/adma.201800940 · Cited by 247
Printable Smart Pattern for Multifunctional Energy-Management E-Textile
Zhang, M., Zhao, M., Jian, M., Wang, C., Yu, A., Yin, Z., Liang, X., Wang, H., Xia, K., Liang, X., et al. (2019) · Matter · doi:10.1016/j.matt.2019.02.003 · Cited by 247
Growth, geometry, and mechanics of a blooming lily
Liang, H., & Mahadevan, L. (2011) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1007808108 · Cited by 246
3D Printed Functional and Biological Materials on Moving Freeform Surfaces
Zhu, Z., Guo, S., Hirdler, T., Eide, C., Fan, X., Tolar, J., & McAlpine, M. C. (2018) · Advanced Materials · doi:10.1002/adma.201707495 · Cited by 245
Progressive Macromolecular Self‐Assembly: From Biomimetic Chemistry to Bio‐Inspired Materials
Zhao, Y., Sakai, F., Su, L., Liu, Y., Wei, K., Chen, G., & Jiang, M. (2013) · Advanced Materials · doi:10.1002/adma.201302215 · Cited by 244
Zhai, X., Ma, Y., Hou, C., Gao, F., Zhang, Y., Ruan, C., Pan, H., Lu, W. W., & Liu, W. (2017) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.7b00224 · Cited by 243
Three-dimensional ultraflexible triboelectric nanogenerator made by 3D printing
Chen, B., Tang, W., Jiang, T., Zhu, L., Chen, X., He, C., Xu, L., Guo, H., Lin, P., Li, D., et al. (2018) · Nano Energy · doi:10.1016/j.nanoen.2017.12.049 · Cited by 243
Zheng, S. Y., Shen, Y., Zhu, F., Yin, J., Qian, J., Fu, J., Wu, Z. L., & Zheng, Q. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201803366 · Cited by 242
Complex 3D‐Printed Microchannels within Cell‐Degradable Hydrogels
Song, K. H., Highley, C. B., Rouff, A., & Burdick, J. A. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201801331 · Cited by 241
Jin, Y., Liu, C., Chai, W., Compaan, A., & Huang, Y. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b03613 · Cited by 238
Li, X., Wang, H., Li, D., Long, S., Zhang, G., & Wu, Z. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b13038 · Cited by 235
Three-Dimensional Printing of pH-Responsive and Functional Polymers on an Affordable Desktop Printer
Nadgorny, M., Xiao, Z., Chen, C., & Connal, L. A. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b07388 · Cited by 234
Self-citationJiang, Z., Xu, M., Li, F., & Yu, Y. (2013) · Journal of the American Chemical Society · doi:10.1021/ja406020r · Cited by 226
Self-citationWang, Z., Ren, Y., Zhu, Y., Hao, L., Chen, Y., An, G., Wu, H., Shi, X., & Mao, C. (2018) · Angewandte Chemie International Edition · doi:10.1002/anie.201804400 · Cited by 226
3D Printing Gets a Boost and Opportunities with Polymer Materials
Hofmann, M. (2014) · ACS Macro Letters · doi:10.1021/mz4006556 · Cited by 225
Chen, S., Huang, T., Zuo, H., Qian, S., Guo, Y., Sun, L., Lei, D., Wu, Q., Zhu, B., He, C., et al. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201805108 · Cited by 219
Wang, Z., An, G., Zhu, Y., Liu, X., Chen, Y., Wu, H., Wang, Y., Shi, X., & Mao, C. (2019) · Materials Horizons · doi:10.1039/c8mh01208c · Cited by 218
Structural Color for Additive Manufacturing: 3D-Printed Photonic Crystals from Block Copolymers
Boyle, B. M., French, T. A., Pearson, R. M., McCarthy, B. G., & Miyake, G. M. (2017) · ACS Nano · doi:10.1021/acsnano.7b00032 · Cited by 217
Blake, A. J., Kohlmeyer, R. R., Hardin, J. O., Carmona, E. A., Maruyama, B., Berrigan, J. D., Huang, H., & Durstock, M. F. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201602920 · Cited by 217
Architected Lattices with High Stiffness and Toughness via Multicore–Shell 3D Printing
Mueller, J., Raney, J. R., Shea, K., & Lewis, J. A. (2018) · Advanced Materials · doi:10.1002/adma.201705001 · Cited by 216
Elevated‐Temperature 3D Printing of Hybrid Solid‐State Electrolyte for Li‐Ion Batteries
Cheng, M., Jiang, Y., Yao, W., Yuan, Y., Deivanayagam, R., Foroozan, T., Huang, Z., Song, B., Rojaee, R., Shokuhfar, T., et al. (2018) · Advanced Materials · doi:10.1002/adma.201800615 · Cited by 214
An Artificial Nocturnal Flower via Humidity‐Gated Photoactuation in Liquid Crystal Networks
Wani, O. M., Verpaalen, R., Zeng, H., Priimagi, A., & Schenning, A. P. H. J. (2019) · Advanced Materials · doi:10.1002/adma.201805985 · Cited by 208
Fabrication of tough epoxy with shape memory effects by UV-assisted direct-ink write printing
Chen, K., Kuang, X., Li, V., Kang, G., & Qi, H. J. (2018) · Soft Matter · doi:10.1039/c7sm02362f · Cited by 207
Zwitterionic Skins with a Wide Scope of Customizable Functionalities
Lei, Z., & Wu, P. (2018) · ACS Nano · doi:10.1021/acsnano.8b08062 · Cited by 206
3D Printed Multifunctional, Hyperelastic Silicone Rubber Foam
Chen, Q., Zhao, J., Ren, J., Rong, L., Cao, P., & Advincula, R. C. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201900469 · Cited by 201
Thiol–Ene Alginate Hydrogels as Versatile Bioinks for Bioprinting
Ooi, H. W., Mota, C., ten Cate, A. T., Calore, A., Moroni, L., & Baker, M. B. (2018) · Biomacromolecules · doi:10.1021/acs.biomac.8b00696 · Cited by 198
Mechanically Robust, Ultraelastic Hierarchical Foam with Tunable Properties via 3D Printing
Chen, Q., Cao, P., & Advincula, R. C. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201800631 · Cited by 197
Wu, Q., Wei, J., Xu, B., Liu, X., Wang, H., Wang, W., Wang, Q., & Liu, W. (2017) · Scientific Reports · doi:10.1038/srep41566 · Cited by 192
3D Printed Programmable Release Capsules
Gupta, M. K., Meng, F., Johnson, B. N., Kong, Y. L., Tian, L., Yeh, Y.-W., Masters, N., Singamaneni, S., & McAlpine, M. C. (2015) · Nano Letters · doi:10.1021/acs.nanolett.5b01688 · Cited by 190
Zhang, B., Zhang, W., Zhang, Z., Zhang, Y.-F., Hingorani, H., Liu, Z., Liu, J., & Ge, Q. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b00359 · Cited by 190
3D Printing by Multiphase Silicone/Water Capillary Inks
Roh, S., Parekh, D. P., Bharti, B., Stoyanov, S. D., & Velev, O. D. (2017) · Advanced Materials · doi:10.1002/adma.201701554 · Cited by 187
Pan, C., Liu, L., Chen, Q., Zhang, Q., & Guo, G. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b12932 · Cited by 187
Wang, Z., Zhou, H., Chen, W., Li, Q., Yan, B., Jin, X., Ma, A., Liu, H., & Zhao, W. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b02060 · Cited by 187
Prashantha, K., & Roger, F. (2017) · Journal of Macromolecular Science, Part A · doi:10.1080/10601325.2017.1250311 · Cited by 184
Photolithographic surface micromachining of polydimethylsiloxane (PDMS)
Chen, W., Lam, R. H. W., & Fu, J. (2012) · Lab Chip · doi:10.1039/c1lc20721k · Cited by 180
Dual-Responsive Hydrogels for Direct-Write 3D Printing
Zhang, M., Vora, A., Han, W., Wojtecki, R. J., Maune, H., Le, A. B. A., Thompson, L. E., McClelland, G. M., Ribet, F., Engler, A. C., et al. (2015) · Macromolecules · doi:10.1021/acs.macromol.5b01550 · Cited by 178
Extrusion printing of ionic–covalent entanglement hydrogels with high toughness
Bakarich, S. E., Panhuis, M. I. H., Beirne, S., Wallace, G. G., & Spinks, G. M. (2013) · Journal of Materials Chemistry B · doi:10.1039/c3tb21159b · Cited by 177
Yang, K., Grant, J. C., Lamey, P., Joshi‐Imre, A., Lund, B. R., Smaldone, R. A., & Voit, W. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201700318 · Cited by 176
Photochemically Driven Polymeric Network Formation: Synthesis and Applications
Blasco, E., Wegener, M., & Barner‐Kowollik, C. (2017) · Advanced Materials · doi:10.1002/adma.201604005 · Cited by 175
3D Printing of PDMS Improves Its Mechanical and Cell Adhesion Properties
Ozbolat, V., Dey, M., Ayan, B., Povilianskas, A., Demirel, M. C., & Ozbolat, I. T. (2018) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.7b00646 · Cited by 173
Azevedo, S., Costa, A. M. S., Andersen, A., Choi, I. S., Birkedal, H., & Mano, J. F. (2017) · Advanced Materials · doi:10.1002/adma.201700759 · Cited by 171
Chemical modification and printability of shear-thinning hydrogel inks for direct-write 3D printing
Smith, P. T., Basu, A., Saha, A., & Nelson, A. (2018) · Polymer · doi:10.1016/j.polymer.2018.01.070 · Cited by 168
Ge, F., Yang, R., Tong, X., Camerel, F., & Zhao, Y. (2018) · Angewandte Chemie International Edition · doi:10.1002/anie.201807495 · Cited by 165
4D Printing of Robust Hydrogels Consisted of Agarose Nanofibers and Polyacrylamide
Guo, J., Zhang, R., Zhang, L., & Cao, X. (2018) · ACS Macro Letters · doi:10.1021/acsmacrolett.7b00957 · Cited by 159
3D bioprinting of a hyaluronan bioink through enzymatic-and visible light-crosslinking
Petta, D., Armiento, A. R., Grijpma, D., Alini, M., Eglin, D., & D’Este, M. (2018) · Biofabrication · doi:10.1088/1758-5090/aadf58 · Cited by 158
Novel ABS-based binary and ternary polymer blends for material extrusion 3D printing
Rocha, C. R., Perez, A. R. T., Roberson, D. A., Shemelya, C. M., MacDonald, E. W., & Wicker, R. B. (2014) · Journal of materials research/Pratt's guide to venture capital sources · doi:10.1557/jmr.2014.158 · Cited by 157
Thermoplastic 3D Printing—An Additive Manufacturing Method for Producing Dense Ceramics
Scheithauer, U., Schwarzer, E., Richter, H., et al. (2014) · International Journal of Applied Ceramic Technology · doi:10.1111/ijac.12306 · Cited by 155
50th Anniversary Perspective: Solid-State Multistimuli, Multiresponsive Polymeric Materials
Herbert, K. M., Schrettl, S., Rowan, S. J., & Weder, C. (2017) · Macromolecules · doi:10.1021/acs.macromol.7b01607 · Cited by 155
Dubbin, K., Hori, Y., Lewis, K. K., & Heilshorn, S. C. (2016) · Advanced Healthcare Materials · doi:10.1002/adhm.201600636 · Cited by 153
Chen, T., Bakhshi, H., Liu, L., Ji, J., & Agarwal, S. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201800514 · Cited by 153
Perovskite nanowire–block copolymer composites with digitally programmable polarization anisotropy
Zhou, N., Bekenstein, Y., Eisler, C. N., Zhang, D., Schwartzberg, A. M., Yang, P., Alivisatos, A. P., & Lewis, J. A. (2019) · Science Advances · doi:10.1126/sciadv.aav8141 · Cited by 149
Dynamic Coordination Chemistry Enables Free Directional Printing of Biopolymer Hydrogel
Shi, L., Carstensen, H., Hölzl, K., Lunzer, M., Li, H., Hilborn, J. G., Ovsianikov, A., & Ossipov, D. A. (2017) · Chemistry of Materials · doi:10.1021/acs.chemmater.7b00128 · Cited by 148
Yang, F., Tadepalli, V. R., & Wiley, B. J. (2017) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.7b00094 · Cited by 145
Guiney, L. M., Mansukhani, N. D., Jakus, A. E., Wallace, S. G., Shah, R. N., & Hersam, M. C. (2018) · Nano Letters · doi:10.1021/acs.nanolett.8b00555 · Cited by 137
3D Printing of Ultratough Polyion Complex Hydrogels
Zhu, F., Cheng, L., Yin, J., Wu, Z. L., Qian, J. W., Fu, J., & Zheng, Q. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b09881 · Cited by 136
Covalent-supramolecular hybrid polymers as muscle-inspired anisotropic actuators
Chin, S. M., Synatschke, C. V., Liu, S., Nap, R. J., Sather, N. A., Wang, Q., Álvarez, Z., Edelbrock, A. N., Fyrner, T., Palmer, L. C., et al. (2018) · Nature Communications · doi:10.1038/s41467-018-04800-w · Cited by 134
Using Synergistic Multiple Dynamic Bonds to Construct Polymers with Engineered Properties
Jiang, Z., Bhaskaran, A., Aitken, H. M., Shackleford, I. C. G., & Connal, L. A. (2019) · Macromolecular Rapid Communications · doi:10.1002/marc.201900038 · Cited by 133
Self-citationPrinting Hydrogels and Elastomers in Arbitrary Sequence with Strong Adhesion
Yang, H., Li, C., Yang, M., Pan, Y., Yin, Q., Tang, J., Qi, H. J., & Suo, Z. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201901721 · Cited by 132
Cited by
Fabrication of Biomedical Scaffolds Using Biodegradable Polymers.
Kirillova, A., Yeazel, T. R., Asheghali, D., Petersen, S. R., Dort, S., Gall, K., & Becker, M. L. (2021) · Chemical Reviews · doi:10.1021/acs.chemrev.0c01200 · Cited by 368
Design, printing, and engineering of regenerative biomaterials for personalized bone healthcare
Jia, Z., Xu, X., Zhu, D., & Zheng, Y. (2023) · Progress in Materials Science · doi:10.1016/j.pmatsci.2023.101072 · Cited by 176
3D printing to innovate biopolymer materials for demanding applications: A review
Li, N., Qiao, D., Zhao, S., Lin, Q., Zhang, B., & Xie, F. (2021) · Materials Today Chemistry · doi:10.1016/j.mtchem.2021.100459 · Cited by 142
3D Printing of Materials and Printing Parameters with Animal Resources: A Review
Jeon, E. Y., Kim, Y., Yun, H.-J., Kim, B.-K., & Choi, Y.-S. (2024) · Food Science of Animal Resources · doi:10.5851/kosfa.2023.e73 · Cited by 19
Metadata
- Authors
- Jiang, Z., Diggle, B., Tan, M. L., Viktorova, J., Bennett, C. W., & Connal, L. A.
- Venue
- Advanced Science
- Publisher
- Wiley
- Published
- 2020-08-05
- Volume
- 7
- Issue
- 17
- Pages
- 2001379-2001379
- ISSN
- 2198-3844 (ISSN-L)
- OpenAlex
- W3047618178
- Cited by
- 408
- References
- 255
- FWCI
- 14.59
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.