The DOI matches its Crossref record; 184 of the 184 references it cites were found in a registry or an index.
Three-dimensional (3D) printed scaffold and material selection for bone repair
Abstract
Critical-sized bone defect repair remains a substantial challenge in clinical settings and requires bone grafts or bone substitute materials. However, existing biomaterials often do not meet the clinical requirements of structural support, osteoinductive property, and controllable biodegradability. To treat large-scale bone defects, the development of three-dimensional (3D) porous scaffolds has received considerable focus within bone engineering. A variety of biomaterials and manufacturing methods, including 3D printing, have emerged to fabricate patient-specific bioactive scaffolds that possess controlled micro-architectures for bridging bone defects in complex configurations. During the last decade, with the development of the 3D printing industry, a large number of tissue-engineered scaffolds have been created for preclinical and clinical applications using novel materials and innovative technologies. Thus, this review provides a brief overview of current progress in existing biomaterials and tissue engineering scaffolds prepared by 3D printing technologies, with an emphasis on the material selection, scaffold design optimization, and their preclinical and clinical applications in the repair of critical-sized bone defects. Furthermore, it will elaborate on the current limitations and potential future prospects of 3D printing technology. STATEMENT OF SIGNIFICANCE: 3D printing has emerged as a critical fabrication process for bone engineering due to its ability to control bulk geometry and internal structure of tissue scaffolds. The advancement of bioprinting methods and compatible ink materials for bone engineering have been a major focus to develop optimal 3D scaffolds for bone defect repair. Achieving a successful balance of cellular function, cellular viability, and mechanical integrity under load-bearing conditions is critical. Hybridization of natural and synthetic polymer-based materials is a promising approach to create novel tissue engineered scaffolds that combines the advantages of both materials and meets various requirements, including biological activity, mechanical strength, easy fabrication and controllable degradation. 3D printing is linked to the future of bone grafts to create on-demand patient-specific scaffolds.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
1 retracted
Xu, S., Xu, S., Zhou, P., Cheng, X., Xie, Y., Liang, C., & Li, C. (2013) · International Journal of Nanomedicine · doi:10.2147/ijn.s50685 · Cited by 160
Retracted3D bioprinting of tissues and organs
Murphy, S. V., & Atala, A. (2014) · Nature Biotechnology · doi:10.1038/nbt.2958 · Cited by 7,034
Porosity of 3D biomaterial scaffolds and osteogenesis
Karageorgiou, V., & Kaplan, D. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2005.02.002 · Cited by 6,622
Sydney Gladman, A., Matsumoto, E. A., Nuzzo, R. G., Mahadevan, L., & Lewis, J. A. (2016) · Nature Materials · doi:10.1038/nmat4544 · Cited by 3,027
On the mechanisms of biocompatibility
Williams, D. F. (2008) · Biomaterials · doi:10.1016/j.biomaterials.2008.04.023 · Cited by 2,772
Hench, L. L. (2006) · Journal of Materials Science: Materials in Medicine · doi:10.1007/s10856-006-0432-z · Cited by 2,505
A review on stereolithography and its applications in biomedical engineering
Melchels, F. P. W., Feijen, J., & Grijpma, D. W. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.04.050 · Cited by 2,457
Wang, X., Xu, S., Zhou, S., Xu, W., Leary, M., Choong, P., Qian, M., Brandt, M., & Xie, Y. M. (2016) · Biomaterials · doi:10.1016/j.biomaterials.2016.01.012 · Cited by 2,121
Bone regeneration: current concepts and future directions
Dimitriou, R., Jones, E., McGonagle, D., & Giannoudis, P. V. (2011) · BMC Medicine · doi:10.1186/1741-7015-9-66 · Cited by 2,003
Printing three-dimensional tissue analogues with decellularized extracellular matrix bioink
Pati, F., Jang, J., Ha, D.-H., Won Kim, S., Rhie, J.-W., Shim, J.-H., Kim, D.-H., & Cho, D.-W. (2014) · Nature Communications · doi:10.1038/ncomms4935 · Cited by 1,904
Fused deposition modeling of novel scaffold architectures for tissue engineering applications
Zein, I., Hutmacher, D. W., Tan, K. C., & Teoh, S. H. (2002) · Biomaterials · doi:10.1016/s0142-9612(01)00232-0 · Cited by 1,874
3D bioprinting for engineering complex tissues
Mandrycky, C., Wang, Z., Kim, K., & Kim, D.-H. (2016) · Biotechnology Advances · doi:10.1016/j.biotechadv.2015.12.011 · Cited by 1,754
Recent advances in 3D printing of biomaterials
Chia, H. N., & Wu, B. M. (2015) · Journal of Biological Engineering · doi:10.1186/s13036-015-0001-4 · Cited by 1,734
Bone Tissue Engineering: State of the Art and Future Trends
Salgado, A. J., Coutinho, O. P., & Reis, R. L. (2004) · Macromolecular Bioscience · doi:10.1002/mabi.200400026 · Cited by 1,681
Current advances and future perspectives in extrusion-based bioprinting
Ozbolat, I. T., & Hospodiuk, M. (2016) · Biomaterials · doi:10.1016/j.biomaterials.2015.10.076 · Cited by 1,572
Bone tissue engineering using polycaprolactone scaffolds fabricated via selective laser sintering
Williams, J. M., Adewunmi, A., Schek, R. M., Flanagan, C. L., Krebsbach, P. H., Feinberg, S. E., Hollister, S. J., & Das, S. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2004.11.057 · Cited by 1,563
Design properties of hydrogel tissue-engineering scaffolds
Zhu, J., & Marchant, R. E. (2011) · Expert Review of Medical Devices · doi:10.1586/erd.11.27 · Cited by 1,430
Polymeric Scaffolds for Bone Tissue Engineering
Liu, X., & Ma, P. X. (2004) · Annals of Biomedical Engineering · doi:10.1023/b:abme.0000017544.36001.8e · Cited by 1,345
Multimaterial 4D Printing with Tailorable Shape Memory Polymers
Ge, Q., Sakhaei, A. H., Lee, H., Dunn, C. K., Fang, N. X., & Dunn, M. L. (2016) · Scientific Reports · doi:10.1038/srep31110 · Cited by 1,160
Bone substitutes in orthopaedic surgery: from basic science to clinical practice
Campana, V., Milano, G., Pagano, E., Barba, M., Cicione, C., Salonna, G., Lattanzi, W., & Logroscino, G. (2014) · Journal of Materials Science: Materials in Medicine · doi:10.1007/s10856-014-5240-2 · Cited by 1,117
Printing and Prototyping of Tissues and Scaffolds
Derby, B. (2012) · Science · doi:10.1126/science.1226340 · Cited by 1,108
Direct 3D Printing of Shear‐Thinning Hydrogels into Self‐Healing Hydrogels
Highley, C. B., Rodell, C. B., & Burdick, J. A. (2015) · Advanced Materials · doi:10.1002/adma.201501234 · Cited by 1,043
3D Printing of Scaffolds for Tissue Regeneration Applications
Do, A., Khorsand, B., Geary, S. M., & Salem, A. K. (2015) · Advanced Healthcare Materials · doi:10.1002/adhm.201500168 · Cited by 949
Direct chemical bond of bioactive glass‐ceramic materials to bone and muscle
Hench, L. L., & Paschall, H. A. (1973) · Journal of Biomedical Materials Research · doi:10.1002/jbm.820070304 · Cited by 942
Wu, W., Geng, P., Li, G., Zhao, D., Zhang, H., & Zhao, J. (2015) · Materials · doi:10.3390/ma8095271 · Cited by 881
Microfluidic Bioprinting of Heterogeneous 3D Tissue Constructs Using Low‐Viscosity Bioink
Colosi, C., Shin, S. R., Manoharan, V., Massa, S., Costantini, M., Barbetta, A., Dokmeci, M. R., Dentini, M., & Khademhosseini, A. (2016) · Advanced Materials · doi:10.1002/adma.201503310 · Cited by 863
Biodegradable Materials for Bone Repair and Tissue Engineering Applications
Sheikh, Z., Najeeb, S., Khurshid, Z., Verma, V., Rashid, H., & Glogauer, M. (2015) · Materials · doi:10.3390/ma8095273 · Cited by 782
Three‐dimensional printing of porous ceramic scaffolds for bone tissue engineering
Seitz, H., Rieder, W., Irsen, S., Leukers, B., & Tille, C. (2005) · Journal of Biomedical Materials Research Part B: Applied Biomaterials · doi:10.1002/jbm.b.30291 · Cited by 742
Direct 4D Printing Via Active Composite Materials
Ding, Z., Yuan, C., Peng, X., Wang, T., Qi, H. J., & Dunn, M. L. (2017) · Science Advances · doi:10.1126/sciadv.1602890 · Cited by 692
Bioprinting Toward Organ Fabrication: Challenges and Future Trends
Ozbolat, I. T., & Yu, Y. (2013) · IEEE Transactions on Biomedical Engineering · doi:10.1109/tbme.2013.2243912 · Cited by 666
Kraus, T., Fischerauer, S. F., Hänzi, A. C., Uggowitzer, P. J., Löffler, J. F., & Weinberg, A. M. (2012) · Acta Biomaterialia · doi:10.1016/j.actbio.2011.11.008 · Cited by 629
Biodegradable Polymer Scaffolds with Well-Defined Interconnected Spherical Pore Network
Ma, P. X., & Choi, J.-W. (2001) · Tissue Engineering · doi:10.1089/107632701300003269 · Cited by 620
Recent advances in bioprinting techniques: approaches, applications and future prospects
Li, J., Chen, M., Fan, X., & Zhou, H. (2016) · Journal of Translational Medicine · doi:10.1186/s12967-016-1028-0 · Cited by 608
Yin, J., Yan, M., Wang, Y., Fu, J., & Suo, H. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b16059 · Cited by 598
Recent Advances in Biomaterials for 3D Printing and Tissue Engineering
Jammalamadaka, U., & Tappa, K. (2018) · Journal of Functional Biomaterials · doi:10.3390/jfb9010022 · Cited by 526
3D Printing of Highly Stretchable, Shape-Memory, and Self-Healing Elastomer toward Novel 4D Printing
Kuang, X., Chen, K., Dunn, C. K., Wu, J., Li, V. C. F., & Qi, H. J. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b18265 · Cited by 523
3D Printing of Emulsions and Foams into Hierarchical Porous Ceramics
Minas, C., Carnelli, D., Tervoort, E., & Studart, A. R. (2016) · Advanced Materials · doi:10.1002/adma.201603390 · Cited by 507
Hydroxyapatite scaffolds for bone tissue engineering made by 3D printing
Leukers, B., Gülkan, H., Irsen, S. H., Milz, S., Tille, C., Schieker, M., & Seitz, H. (2005) · Journal of Materials Science: Materials in Medicine · doi:10.1007/s10856-005-4716-5 · Cited by 499
Delivery of human fibroblast cells by piezoelectric drop-on-demand inkjet printing
Saunders, R. E., Gough, J. E., & Derby, B. (2008) · Biomaterials · doi:10.1016/j.biomaterials.2007.09.032 · Cited by 495
Ultrafast Digital Printing toward 4D Shape Changing Materials
Huang, L., Jiang, R., Wu, J., Song, J., Bai, H., Li, B., Zhao, Q., & Xie, T. (2017) · Advanced Materials · doi:10.1002/adma.201605390 · Cited by 490
Recent Advances in Bioink Design for 3D Bioprinting of Tissues and Organs
Ji, S., & Guvendiren, M. (2017) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2017.00023 · Cited by 490
4D printing smart biomedical scaffolds with novel soybean oil epoxidized acrylate
Miao, S., Zhu, W., Castro, N. J., Nowicki, M., Zhou, X., Cui, H., Fisher, J. P., & Zhang, L. G. (2016) · Scientific Reports · doi:10.1038/srep27226 · Cited by 477
Self-citationSelective laser sintering in biomedical engineering
Mazzoli, A. (2013) · Medical & Biological Engineering & Computing · doi:10.1007/s11517-012-1001-x · Cited by 469
Preparation of aligned porous gelatin scaffolds by unidirectional freeze-drying method
Wu, X., Liu, Y., Li, X., Wen, P., Zhang, Y., Long, Y., Wang, X., Guo, Y., Xing, F., & Gao, J. (2010) · Acta Biomaterialia · doi:10.1016/j.actbio.2009.08.041 · Cited by 457
Cox, S. C., Thornby, J. A., Gibbons, G. J., Williams, M. A., & Mallick, K. K. (2015) · Materials Science and Engineering: C · doi:10.1016/j.msec.2014.11.024 · Cited by 452
Skardal, A., Devarasetty, M., Kang, H.-W., Mead, I., Bishop, C., Shupe, T., Lee, S. J., Jackson, J., Yoo, J., Soker, S., et al. (2015) · Acta Biomaterialia · doi:10.1016/j.actbio.2015.07.030 · Cited by 428
The management of fractures with bone loss
Keating, J. F., Simpson, A. H. R. W., & Robinson, C. M. (2005) · The Journal of Bone and Joint Surgery. British volume · doi:10.1302/0301-620x.87b2.15874 · Cited by 422
4D Printing of Shape Memory‐Based Personalized Endoluminal Medical Devices
Zarek, M., Mansour, N., Shapira, S., & Cohn, D. (2017) · Macromolecular Rapid Communications · doi:10.1002/marc.201600628 · Cited by 419
Fedorovich, N. E., De Wijn, J. R., Verbout, A. J., Alblas, J., & Dhert, W. J. A. (2008) · Tissue Engineering Part A · doi:10.1089/ten.a.2007.0158 · Cited by 410
3D printing of composite tissue with complex shape applied to ear regeneration
Lee, J.-S., Hong, J. M., Jung, J. W., Shim, J.-H., Oh, J.-H., & Cho, D.-W. (2014) · Biofabrication · doi:10.1088/1758-5082/6/2/024103 · Cited by 407
Designing of PLA scaffolds for bone tissue replacement fabricated by ordinary commercial 3D printer
Gregor, A., Filová, E., Novák, M., Kronek, J., Chlup, H., Buzgo, M., Blahnová, V., Lukášová, V., Bartoš, M., Nečas, A., et al. (2017) · Journal of Biological Engineering · doi:10.1186/s13036-017-0074-3 · Cited by 406
Biomaterials for Vascular Tissue Engineering
Ravi, S., & Chaikof, E. L. (2010) · Regenerative Medicine · doi:10.2217/rme.09.77 · Cited by 387
Li, Y.-C., Zhang, Y. S., Akpek, A., Shin, S. R., & Khademhosseini, A. (2016) · Biofabrication · doi:10.1088/1758-5090/9/1/012001 · Cited by 385
3D Printing of Calcium Phosphate Ceramics for Bone Tissue Engineering and Drug Delivery
Trombetta, R., Inzana, J. A., Schwarz, E. M., Kates, S. L., & Awad, H. A. (2017) · Annals of Biomedical Engineering · doi:10.1007/s10439-016-1678-3 · Cited by 377
Tarafder, S., Balla, V. K., Davies, N. M., Bandyopadhyay, A., & Bose, S. (2013) · Journal of Tissue Engineering and Regenerative Medicine · doi:10.1002/term.555 · Cited by 364
Wu, C., Luo, Y., Cuniberti, G., Xiao, Y., & Gelinsky, M. (2011) · Acta Biomaterialia · doi:10.1016/j.actbio.2011.03.009 · Cited by 363
Characterization of printed PLA scaffolds for bone tissue engineering
Grémare, A., Guduric, V., Bareille, R., Heroguez, V., Latour, S., L'heureux, N., Fricain, J., Catros, S., & Le Nihouannen, D. (2018) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.36289 · Cited by 362
Cranial reconstruction: 3D biomodel and custom-built implant created using additive manufacturing
Jardini, A. L., Larosa, M. A., Filho, R. M., Zavaglia, C. A. D. C., Bernardes, L. F., Lambert, C. S., Calderoni, D. R., & Kharmandayan, P. (2014) · Journal of Cranio-Maxillofacial Surgery · doi:10.1016/j.jcms.2014.07.006 · Cited by 350
Gao, G., Yonezawa, T., Hubbell, K., Dai, G., & Cui, X. (2015) · Biotechnology Journal · doi:10.1002/biot.201400635 · Cited by 340
Poly(dopamine) coating of 3D printed poly(lactic acid) scaffolds for bone tissue engineering
Kao, C.-T., Lin, C.-C., Chen, Y.-W., Yeh, C.-H., Fang, H.-Y., & Shie, M.-Y. (2015) · Materials Science and Engineering: C · doi:10.1016/j.msec.2015.06.028 · Cited by 327
Ogose, A., Hotta, T., Kawashima, H., Kondo, N., Gu, W., Kamura, T., & Endo, N. (2005) · Journal of Biomedical Materials Research Part B: Applied Biomaterials · doi:10.1002/jbm.b.30136 · Cited by 315
Preparation of poly(ε-caprolactone)-based tissue engineering scaffolds by stereolithography
Elomaa, L., Teixeira, S., Hakala, R., Korhonen, H., Grijpma, D. W., & Seppälä, J. V. (2011) · Acta Biomaterialia · doi:10.1016/j.actbio.2011.06.039 · Cited by 311
3D printed anatomical nerve regeneration pathways
Johnson, B. N., Lancaster, K. Z., Zhen, G., He, J., Gupta, M. K., Kong, Y. L., Engel, E. A., Krick, K. D., Ju, A., Meng, F., et al. (2015) · Advanced Functional Materials · doi:10.1002/adfm.201501760 · Cited by 293
Self-citationLee, K.-W., Wang, S., Fox, B. C., Ritman, E. L., Yaszemski, M. J., & Lu, L. (2007) · Biomacromolecules · doi:10.1021/bm060834v · Cited by 292
The Roles of Hypoxia in the In Vitro Engineering of Tissues
Malda, J., Klein, T. J., & Upton, Z. (2007) · Tissue Engineering · doi:10.1089/ten.2006.0417 · Cited by 282
Keriquel, V., Guillemot, F., Arnault, I., Guillotin, B., Miraux, S., Amédée, J., Fricain, J.-C., & Catros, S. (2010) · Biofabrication · doi:10.1088/1758-5082/2/1/014101 · Cited by 280
Lee, J. W., Kang, K. S., Lee, S. H., Kim, J.-Y., Lee, B.-K., & Cho, D.-W. (2011) · Biomaterials · doi:10.1016/j.biomaterials.2010.09.035 · Cited by 274
Engineering anatomically shaped vascularized bone grafts with hASCs and 3D-printed PCL scaffolds
Temple, J. P., Hutton, D. L., Hung, B. P., Huri, P. Y., Cook, C. A., Kondragunta, R., Jia, X., & Grayson, W. L. (2014) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.35107 · Cited by 268
Self-citationOsteoimmunomodulatory properties of magnesium scaffolds coated with β-tricalcium phosphate
Chen, Z., Mao, X., Tan, L., Friis, T., Wu, C., Crawford, R., & Xiao, Y. (2014) · Biomaterials · doi:10.1016/j.biomaterials.2014.06.038 · Cited by 267
Roy, T. D., Simon, J. L., Ricci, J. L., Rekow, E. D., Thompson, V. P., & Parsons, J. R. (2003) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.10582 · Cited by 262
Novel processing of iron–manganese alloy-based biomaterials by inkjet 3-D printing
Chou, D.-T., Wells, D., Hong, D., Lee, B., Kuhn, H., & Kumta, P. N. (2013) · Acta Biomaterialia · doi:10.1016/j.actbio.2013.04.016 · Cited by 259
Biodegradable and bioactive porous scaffold structures prepared using fused deposition modeling
Korpela, J., Kokkari, A., Korhonen, H., Malin, M., Närhi, T., & Seppälä, J. (2013) · Journal of Biomedical Materials Research Part B: Applied Biomaterials · doi:10.1002/jbm.b.32863 · Cited by 258
Science in three dimensions: The print revolution
Jones, N. (2012) · Nature · doi:10.1038/487022a · Cited by 249
Zhou, Z., Buchanan, F., Mitchell, C., & Dunne, N. (2014) · Materials Science and Engineering: C · doi:10.1016/j.msec.2014.01.027 · Cited by 241
Nyberg, E., Rindone, A., Dorafshar, A., & Grayson, W. L. (2017) · Tissue Engineering Part A · doi:10.1089/ten.tea.2016.0418 · Cited by 229
Zhu, Y., Gao, C., & Shen, J. (2002) · Biomaterials · doi:10.1016/s0142-9612(02)00247-8 · Cited by 225
Mondrinos, M. J., Dembzynski, R., Lu, L., Byrapogu, V. K. C., Wootton, D. M., Lelkes, P. I., & Zhou, J. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2006.03.049 · Cited by 225
Barba, A., Diez-Escudero, A., Maazouz, Y., Rappe, K., Espanol, M., Montufar, E. B., Bonany, M., Sadowska, J. M., Guillem-Marti, J., Öhman-Mägi, C., et al. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b14175 · Cited by 219
Wang, M., Favi, P., Cheng, X., Golshan, N. H., Ziemer, K. S., Keidar, M., & Webster, T. J. (2016) · Acta Biomaterialia · doi:10.1016/j.actbio.2016.09.030 · Cited by 217
Castilho, M., Moseke, C., Ewald, A., Gbureck, U., Groll, J., Pires, I., Teßmar, J., & Vorndran, E. (2014) · Biofabrication · doi:10.1088/1758-5082/6/1/015006 · Cited by 211
Morris, V. B., Nimbalkar, S., Younesi, M., McClellan, P., & Akkus, O. (2017) · Annals of Biomedical Engineering · doi:10.1007/s10439-016-1643-1 · Cited by 207
The morphology of anisotropic 3D-printed hydroxyapatite scaffolds
Fierz, F. C., Beckmann, F., Huser, M., Irsen, S. H., Leukers, B., Witte, F., Degistirici, Ö., Andronache, A., Thie, M., & Müller, B. (2008) · Biomaterials · doi:10.1016/j.biomaterials.2008.06.012 · Cited by 203
Yang, T., Hu, Y., Wang, C., & Binks, B. P. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b05012 · Cited by 198
Guillaume, O., Geven, M. A., Sprecher, C. M., Stadelmann, V. A., Grijpma, D. W., Tang, T. T., Qin, L., Lai, Y., Alini, M., de Bruijn, J. D., et al. (2017) · Acta Biomaterialia · doi:10.1016/j.actbio.2017.03.006 · Cited by 197
Miao, S., Zhu, W., Castro, N. J., Leng, J., & Zhang, L. G. (2016) · Tissue Engineering Part C: Methods · doi:10.1089/ten.tec.2015.0542 · Cited by 187
Self-citationAutomated 3D bioassembly of micro-tissues for biofabrication of hybrid tissue engineered constructs
Mekhileri, N. V., Lim, K. S., Brown, G. C. J., Mutreja, I., Schon, B. S., Hooper, G. J., & Woodfield, T. B. F. (2018) · Biofabrication · doi:10.1088/1758-5090/aa9ef1 · Cited by 185
Luo, Y., Wu, C., Lode, A., & Gelinsky, M. (2012) · Biofabrication · doi:10.1088/1758-5082/5/1/015005 · Cited by 182
Tarafder, S., Davies, N. M., Bandyopadhyay, A., & Bose, S. (2013) · Biomaterials Science · doi:10.1039/c3bm60132c · Cited by 179
Lin, K.-F., He, S., Song, Y., Wang, C.-M., Gao, Y., Li, J.-Q., Tang, P., Wang, Z., Bi, L., & Pei, G.-X. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b00815 · Cited by 176
Shao, H., Ke, X., Liu, A., Sun, M., He, Y., Yang, X., Fu, J., Liu, Y., Zhang, L., Yang, G., et al. (2017) · Biofabrication · doi:10.1088/1758-5090/aa663c · Cited by 172
Self-citationMolecular Basis for Action of Bioactive Glasses as Bone Graft Substitute
Välimäki, V.-V., & Aro, H. T. (2006) · Scandinavian Journal of Surgery · doi:10.1177/145749690609500204 · Cited by 170
Koch, L., Gruene, M., Unger, C., & Chichkov, B. (2013) · Current Pharmaceutical Biotechnology · doi:10.2174/1389201011314010012 · Cited by 166
Ronca, A., Ambrosio, L., & Grijpma, D. W. (2013) · Acta Biomaterialia · doi:10.1016/j.actbio.2012.12.004 · Cited by 165
Development of 3D printed fibrillar collagen scaffold for tissue engineering
Nocera, A. D., Comín, R., Salvatierra, N. A., & Cid, M. P. (2018) · Biomedical Microdevices · doi:10.1007/s10544-018-0270-z · Cited by 165
3D Printing of Personalized Artificial Bone Scaffolds
Jariwala, S. H., Lewis, G. S., Bushman, Z. J., Adair, J. H., & Donahue, H. J. (2015) · 3D Printing and Additive Manufacturing · doi:10.1089/3dp.2015.0001 · Cited by 164
Liu, H., Lin, J., & Roy, K. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2006.05.053 · Cited by 161
Jana, S., & Lerman, A. (2015) · Biotechnology Advances · doi:10.1016/j.biotechadv.2015.07.006 · Cited by 160
3D plotting of growth factor loaded calcium phosphate cement scaffolds
Akkineni, A. R., Luo, Y., Schumacher, M., Nies, B. A., Lode, A., & Gelinsky, M. (2015) · Acta Biomaterialia · doi:10.1016/j.actbio.2015.08.036 · Cited by 156
Teixeira, B. N., Aprile, P., Mendonça, R. H., Kelly, D. J., & Thiré, R. M. D. S. M. (2018) · Journal of Biomedical Materials Research Part B Applied Biomaterials · doi:10.1002/jbm.b.34093 · Cited by 152
Kim, K., Dean, D., Wallace, J., Breithaupt, R., Mikos, A. G., & Fisher, J. P. (2011) · Biomaterials · doi:10.1016/j.biomaterials.2011.01.016 · Cited by 150
Pei, X., Ma, L., Zhang, B., Sun, J., Sun, Y., Fan, Y., Gou, Z., Zhou, C., & Zhang, X. (2017) · Biofabrication · doi:10.1088/1758-5090/aa90ed · Cited by 150
Zhang, Y., Xia, L., Zhai, D., Shi, M., Luo, Y., Feng, C., Fang, B., Yin, J., Chang, J., & Wu, C. (2015) · Nanoscale · doi:10.1039/c5nr05421d · Cited by 149
Naghieh, S., Karamooz-Ravari, M. R., Badrossamay, M., Foroozmehr, E., & Kadkhodaei, M. (2016) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2016.01.031 · Cited by 148
Enabling personalized implant and controllable biosystem development through 3D printing
Nagarajan, N., Dupret‐Bories, A., Karabulut, E., Zorlutuna, P., & Vrana, N. E. (2018) · Biotechnology Advances · doi:10.1016/j.biotechadv.2018.02.004 · Cited by 141
Barui, S., Chatterjee, S., Mandal, S., Kumar, A., & Basu, B. (2016) · Materials Science and Engineering C · doi:10.1016/j.msec.2016.09.040 · Cited by 130
Tarafder, S., Dernell, W. S., Bandyopadhyay, A. K., & Bose, S. (2014) · Journal of Biomedical Materials Research Part B Applied Biomaterials · doi:10.1002/jbm.b.33239 · Cited by 129
Scalable robotic biofabrication of tissue spheroids
Mehesz, A. N., Brown, J. L., Hajdu, Z., Beaver, W., da Silva, J. V. L., Visconti, R. P., Markwald, R. R., & Mironov, V. A. (2011) · Biofabrication · doi:10.1088/1758-5082/3/2/025002 · Cited by 126
Ge, Z., Tian, X., Heng, B. C., Fan, V., Yeo, J. F., & Cao, T. (2009) · Biomedical Materials · doi:10.1088/1748-6041/4/2/021001 · Cited by 125
Qi, X., Pei, P., Zhu, M. C., Du, X., Xin, C., Zhao, S., Li, X., & Zhu, Y. (2017) · Scientific Reports · doi:10.1038/srep42556 · Cited by 125
Gelatin-Based Laser Direct-Write Technique for the Precise Spatial Patterning of Cells
Schiele, N. R., Chrisey, D. B., & Corr, D. T. (2010) · Tissue Engineering Part C Methods · doi:10.1089/ten.tec.2010.0442 · Cited by 123
Fabrication of poly-DL-lactide/polyethylene glycol scaffolds using the gas foaming technique
Ji, C., Annabi, N., Hosseinkhani, M., Sivaloganathan, S., & Dehghani, F. (2011) · Acta Biomaterialia · doi:10.1016/j.actbio.2011.09.028 · Cited by 122
Influence of 3D printed porous architecture on mesenchymal stem cell enrichment and differentiation
Ferlin, K. M., Prendergast, M. E., Miller, M. L., Kaplan, D. S., & Fisher, J. P. (2016) · Acta Biomaterialia · doi:10.1016/j.actbio.2016.01.007 · Cited by 120
Extrusion-based 3D printing of poly(propylene fumarate) scaffolds with hydroxyapatite gradients
Trachtenberg, J. E., Placone, J. K., Smith, B. T., Fisher, J. P., & Mikos, A. G. (2017) · Journal of Biomaterials Science Polymer Edition · doi:10.1080/09205063.2017.1286184 · Cited by 120
Roskies, M. G., Jordan, J., Fang, D., Abdallah, M., Hier, M. P., Mlynarek, A., Tamimi, F., & Tran, S. D. (2016) · Journal of Biomaterials Applications · doi:10.1177/0885328216638636 · Cited by 116
Liao, H.-T., Lee, M., Tsai, W., Wang, H.-C., & Lu, W.-C. (2013) · Journal of Tissue Engineering and Regenerative Medicine · doi:10.1002/term.1811 · Cited by 115
Alginate gelation-induced cell death during laser-assisted cell printing
Gudapati, H., Yan, J., Huang, Y. H., & Chrisey, D. B. (2014) · Biofabrication · doi:10.1088/1758-5082/6/3/035022 · Cited by 115
Wang, C., Zhao, Q., & Wang, M. (2017) · Biofabrication · doi:10.1088/1758-5090/aa71c9 · Cited by 114
Self-assembled composite matrix in a hierarchical 3-D scaffold for bone tissue engineering
Chen, M., Le, D. Q. S., Baatrup, A., Nygaard, J. V., Hein, S., Bjerre, L., Kassem, M. S., Zou, X., & Bünger, C. E. (2011) · Acta Biomaterialia · doi:10.1016/j.actbio.2010.12.031 · Cited by 113
Ahlfeld, T., Akkineni, A. R., Förster, Y., Köhler, T., Knaack, S., Gelinsky, M., & Lode, A. (2016) · Annals of Biomedical Engineering · doi:10.1007/s10439-016-1685-4 · Cited by 112
Moisture based three-dimensional printing of calcium phosphate structures for scaffold engineering
Butscher, A., Bohner, M., Doebelin, N., Galea, L., Loeffel, O., & Müller, R. (2012) · Acta Biomaterialia · doi:10.1016/j.actbio.2012.10.009 · Cited by 111
Fedorovich, N. E., Kuipers, E., Gawlitta, D., Dhert, W. J. A., & Alblas, J. (2011) · Tissue Engineering Part A · doi:10.1089/ten.tea.2011.0001 · Cited by 109
Yang, F., Chen, C., Zhou, Q., Gong, Y., Li, R., Li, C., Klämpfl, F., Freund, S., Wu, X., Sun, Y., et al. (2017) · Scientific Reports · doi:10.1038/srep45360 · Cited by 109
Biomimetic Approaches for Bone Tissue Engineering
Ng, J., Spiller, K. L., Bernhard, J., & Vunjak‐Novakovic, G. (2016) · Tissue Engineering Part B Reviews · doi:10.1089/ten.teb.2016.0289 · Cited by 104
3D Powder Printed Bioglass and β-Tricalcium Phosphate Bone Scaffolds
Seidenstuecker, M., Kerr, L., Bernstein, A., Mayr, H. O., Suedkamp, N. P., Gadow, R., Krieg, P., Latorre, S. H., Thomann, R., Syrowatka, F., et al. (2017) · Materials · doi:10.3390/ma11010013 · Cited by 103
Current progress in inorganic artificial biomaterials
Li, Z., & Kawashita, M. (2011) · Journal of Artificial Organs · doi:10.1007/s10047-011-0585-5 · Cited by 101
Scheithauer, U., Weingarten, S., Johne, R., Schwarzer, E., Abel, J., Richter, H., Moritz, T., & Michaelis, A. (2017) · Materials · doi:10.3390/ma10121368 · Cited by 100
Büyüksungur, S., Tanır, T. E., Büyüksungur, A., Bektas, E. I., Köse, G. T., Yücel, D., Beyzadeoğlu, T., Cetinkaya, E., Yenigun, C., Tönük, E., et al. (2017) · Biomaterials Science · doi:10.1039/c7bm00514h · Cited by 99
4D printing of a self-morphing polymer driven by a swellable guest medium
Su, J., Tao, X., Deng, H., Zhang, C., Jiang, S., Lin, Y., & Lin, J. (2017) · Soft Matter · doi:10.1039/c7sm01796k · Cited by 97
Hybrid scaffolds based on PLGA and silk for bone tissue engineering
Sheikh, F. A., Ju, H. W., Moon, B. M., Lee, O. J., Kim, J.-H., Park, H. J., Kim, D., Kim, D., Jang, J. E., Khang, G., et al. (2015) · Journal of Tissue Engineering and Regenerative Medicine · doi:10.1002/term.1989 · Cited by 95
Effect of prevascularization on in vivo vascularization of poly(propylene fumarate)/fibrin scaffolds
Mishra, R., Roux, B. M., Posukonis, M., Bodamer, E., Brey, E. M., Fisher, J. P., & Dean, D. (2015) · Biomaterials · doi:10.1016/j.biomaterials.2015.10.026 · Cited by 94
Bourke, S. L., Kohn, J., & Dunn, M. G. (2004) · Tissue Engineering · doi:10.1089/107632704322791682 · Cited by 93
3D Printing of Hierarchical Silk Fibroin Structures
Sommer, M., Schaffner, M., Carnelli, D., & Studart, A. R. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b11440 · Cited by 93
MicroRNAs in regulation of osteogenic differentiation of mesenchymal stem cells
Huang, C. X., Geng, J., & Jiang, S. (2016) · Cell and Tissue Research · doi:10.1007/s00441-016-2462-2 · Cited by 92
Jun, S., Lee, E., Jang, T., Kim, H., Jang, J.-H., & Koh, Y. (2013) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-012-4822-0 · Cited by 87
Dadsetan, M., Guda, T., Runge, M. B., Mijares, D. Q., LeGeros, R. Z., LeGeros, J. P., Silliman, D. T., Lu, L., Wenke, J. C., Baer, P. R. B., et al. (2015) · Acta Biomaterialia · doi:10.1016/j.actbio.2014.12.024 · Cited by 87
Suh, S. W., Shin, J. Y., Kim, J., Kim, J., Beak, C. H., Kim, D., Kim, H., Jeon, S. S., & Choo, I.-W. (2002) · ASAIO Journal · doi:10.1097/00002480-200209000-00003 · Cited by 87
Mozdzen, L. C., Rodgers, R. C., Banks, J. M., Bailey, R. C., & Harley, B. A. C. (2016) · Acta Biomaterialia · doi:10.1016/j.actbio.2016.02.004 · Cited by 87
Enhanced Osteoblast Adhesion on Polymeric Nano-Scaffolds for Bone Tissue Engineering
Saranya, N., Sekaran, S., Moorthi, A., Ramyakrishna, B., & Selvamurugan, N. (2011) · Journal of Biomedical Nanotechnology · doi:10.1166/jbn.2011.1283 · Cited by 87
Kim, W. J., Yun, H., & Kim, G. (2017) · Scientific Reports · doi:10.1038/s41598-017-03455-9 · Cited by 87
Velioglu, Z. B., Pulat, D., Demirbakan, B., Özcan, B., Bayrak, E., & Erişken, C. (2018) · Connective Tissue Research · doi:10.1080/03008207.2018.1499732 · Cited by 83
Rajaram, A., Schreyer, D. J., & Chen, D. (2015) · Journal of Biomaterials Science Polymer Edition · doi:10.1080/09205063.2015.1016383 · Cited by 82
Osteogenic effect of controlled released rhBMP-2 in 3D printed porous hydroxyapatite scaffold
Wang, H., Wu, G. H., Zhang, J., Zhou, K., Yin, B., Su, X., Qiu, G., Yang, G., Zhang, X., Zhou, G., et al. (2016) · Colloids and Surfaces B Biointerfaces · doi:10.1016/j.colsurfb.2016.02.007 · Cited by 81
Self-citationHe, J., Xu, F., Dong, R., Guo, B., & Li, D. (2017) · Biofabrication · doi:10.1088/1758-5090/aa53bc · Cited by 74
Strobel, L. A., Rath, S., Maier, A., Beier, J., Arkudas, A., Greil, P., Horch, R. E., & Kneser, U. (2012) · Journal of Tissue Engineering and Regenerative Medicine · doi:10.1002/term.1511 · Cited by 72
Cavo, M., & Scaglione, S. (2016) · Materials Science and Engineering C · doi:10.1016/j.msec.2016.07.041 · Cited by 72
Dadhich, P., Das, B., Pal, P., Srivas, P. K., Dutta, J., Ray, S., & Dhara, S. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b11981 · Cited by 71
Ge, Z., Wang, L., Heng, B. C., Tian, X., Lü, K., Fan, V., Yeo, J. F., Cao, T., & Tan, E. X. X. (2008) · Journal of Biomaterials Applications · doi:10.1177/0885328208094301 · Cited by 70
Eqtesadi, S., Motealleh, A., Pajares, A., Guiberteau, F., & Miranda, P. (2015) · Journal of Non-Crystalline Solids · doi:10.1016/j.jnoncrysol.2015.02.025 · Cited by 68
Ikeda, R., Fujioka, H., Nagura, I., Kokubu, T., Toyokawa, N., Inui, A., Makino, T., Kaneko, H., Doita, M., & Kurosaka, M. (2008) · International Orthopaedics · doi:10.1007/s00264-008-0532-0 · Cited by 67
Castilho, M. D., Rodrigues, J. M. C., Pires, I., Gouveia, B., Pereira, M. F. C., Moseke, C., Gröll, J., Ewald, A., & Vorndran, E. (2015) · Biofabrication · doi:10.1088/1758-5090/7/1/015004 · Cited by 67
Kawai, T., Shanjani, Y., Fazeli, S., Behn, A. W., Okuzu, Y., Goodman, S. B., & Yang, Y. (2017) · Journal of Orthopaedic Research® · doi:10.1002/jor.23673 · Cited by 67
Song, S., Choi, J., Park, Y., Lee, J. J., Hong, S., & Sun, K. (2010) · Artificial Organs · doi:10.1111/j.1525-1594.2010.01143.x · Cited by 66
Fan, H., Zeng, X., Wang, X., Zhu, R., & Pei, G. (2014) · Biomaterials · doi:10.1016/j.biomaterials.2014.05.035 · Cited by 63
Liu, I.-H., Chang, S., & Lin, H. (2015) · Biomedical Materials · doi:10.1088/1748-6041/10/3/035004 · Cited by 62
Fabrication of Bioactive Composite Scaffolds by Electrospinning for Bone Regeneration
Nandakumar, A., Fernandes, H., de Boer, J., Moroni, L., Habibović, P., & van Blitterswijk, C. (2010) · Macromolecular Bioscience · doi:10.1002/mabi.201000145 · Cited by 61
Design of Porous Three-Dimensional PDLLA/nano-hap Composite Scaffolds Using Stereolithography
Ronca, A., Ambrosio, L., & Grijpma, D. W. (2012) · Journal of Applied Biomaterials & Functional Materials · doi:10.5301/jabfm.2012.10211 · Cited by 59
Study on compression behavior of porous magnesium used as bone tissue engineering scaffolds
Tan, L., Gong, M., Zheng, F., Zhang, B., & Yang, K. (2009) · Biomedical Materials · doi:10.1088/1748-6041/4/1/015016 · Cited by 58
Tian, Y. E., Guo, R., Shi, B., Chen, L., Yang, L., & Fu, Q. (2016) · Life Sciences · doi:10.1016/j.lfs.2016.02.031 · Cited by 58
Huh, J., Lee, J., Kim, W.-J., Yeo, M., & Kim, G. (2017) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2017.09.030 · Cited by 56
Yang, S., Wang, J., Tang, L., Ao, H., Tan, H., Tang, T., & Liu, C. (2014) · Colloids and Surfaces B Biointerfaces · doi:10.1016/j.colsurfb.2013.12.052 · Cited by 54
Westhauser, F., Weis, C., Prokscha, M., Bittrich, L. A., Li, W., Xiao, K., Kneser, U., Kauczor, H., Schmidmaier, G., Boccaccini, A. R., et al. (2016) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-016-5732-3 · Cited by 54
Sasaki, G., Watanabe, Y., Miyamoto, W., Yasui, Y., Morimoto, S., & Kawano, H. (2017) · International Orthopaedics · doi:10.1007/s00264-017-3503-5 · Cited by 54
Goh, Y. Q., & Ooi, C. P. (2008) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-008-3366-9 · Cited by 52
Shuai, C., Zhuang, J., Hu, H., Peng, S., Liu, D., & Liu, J. (2013) · Biotechnology and Applied Biochemistry · doi:10.1002/bab.1064 · Cited by 51
Doyle, H., Lohfeld, S., & McHugh, P. E. (2015) · Medical Engineering & Physics · doi:10.1016/j.medengphy.2015.05.009 · Cited by 50
High-resolution direct 3D printed PLGA scaffolds: print and shrink
Chia, H. N., & Wu, B. M. (2014) · Biofabrication · doi:10.1088/1758-5090/7/1/015002 · Cited by 50
Vella, J. B., Trombetta, R. P., Hoffman, M. D., Inzana, J. A., Awad, H. A., & Benoit, D. S. W. (2017) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.36270 · Cited by 50
Jonitz‐Heincke, A., Lochner, K., Lindner, T., Hansmann, D., Marrot, A., & Bader, R. (2011) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-011-4384-6 · Cited by 42
Printing-induced cell injury evaluation during laser printing of 3T3 mouse fibroblasts
Zhang, Z., Chai, W., Xiong, R., Zhou, L. J., & Huang, Y. H. (2017) · Biofabrication · doi:10.1088/1758-5090/aa6ed9 · Cited by 40
Liu, M. J. J., Chou, S. M., Chua, C. K., Tay, B. C. M., & Ng, B. K. (2011) · Medical Engineering & Physics · doi:10.1016/j.medengphy.2011.09.029 · Cited by 39
Chen, M., Le, D. Q. S., Kjems, J., Bünger, C. E., & Lysdahl, H. (2015) · BioResearch open access · doi:10.1089/biores.2015.0021 · Cited by 37
Wang, Y.-F., Barrera, C. M., Dauer, E. A., Gu, W., Andreopoulos, F. M., & Huang, C. ‐. C. (2016) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2016.09.029 · Cited by 37
Alignment hierarchies: engineering architecture from the nanometre to the micrometre scale
Kureshi, A. K., Cheema, U., Alekseeva, T., Cambrey, A. D., & Brown, R. A. (2010) · Journal of The Royal Society Interface · doi:10.1098/rsif.2010.0346.focus · Cited by 35
Mozdzen, L. C., Vucetic, A., & Harley, B. A. C. (2016) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2016.10.017 · Cited by 34
García, M. M., Izadifar, M., & Chen, D. (2017) · Journal of Functional Biomaterials · doi:10.3390/jfb8040048 · Cited by 34
Wu, B. M., & Cima, M. J. (1999) · Polymer Engineering and Science · doi:10.1002/pen.11411 · Cited by 32
Diker, N., Gülsever, S., Köroğlu, T., Akçay, E. Y., & Oğuz, Y. (2018) · Journal of Craniofacial Surgery · doi:10.1097/scs.0000000000004338 · Cited by 31
Development and evaluation of cross-linked collagen-hydroxyapatite scaffolds for tissue engineering
Panda, N. N., Jonnalagadda, S., & Pramanik, K. (2013) · Journal of Biomaterials Science Polymer Edition · doi:10.1080/09205063.2013.822247 · Cited by 30
Photoinitiator-free 3D scaffolds fabricated by excimer laser photocuring
Farkas, B., Dante, S., & Brandi, F. (2016) · Nanotechnology · doi:10.1088/1361-6528/28/3/034001 · Cited by 29
Parry, J. A., Olthof, M. G. L., Shogren, K. L., Dadsetan, M., van Wijnen, A. J., Yaszemski, M. J., & Kakar, S. (2017) · Tissue Engineering Part A · doi:10.1089/ten.tea.2016.0343 · Cited by 29
Kim, B., Yang, S., Park, H., Lee, S., Cho, Y., & Lee, J. (2017) · Journal of Biomaterials Science Polymer Edition · doi:10.1080/09205063.2017.1312059 · Cited by 23
Xia, Y., Zhou, P. Y., Cheng, X. S., Yu, X., Liang, C., Li, C., & Xu, S. G. (2013) · DOAJ (DOAJ: Directory of Open Access Journals) · Cited by 22
Johnson, B. N., & Jia, X. (2016) · Neural Regeneration Research · doi:10.4103/1673-5374.193230 · Cited by 20
Self-citation
Cited by
Normal Bone Anatomy and Physiology
Clarke, B. (2008) · Clinical Journal of the American Society of Nephrology · doi:10.2215/cjn.04151206 · Cited by 2,192
Scaffold Fabrication Technologies and Structure/Function Properties in Bone Tissue Engineering
Collins, M. N., Ren, G., Young, K., Pina, S., Reis, R. L., & Oliveira, J. M. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202010609 · Cited by 867
Zhu, G., Zhang, T., Chen, M., Yao, K., Huang, X., Zhang, B., Li, Y., Liu, J., Wang, Y., & Zhao, Z. (2021) · Bioactive Materials · doi:10.1016/j.bioactmat.2021.03.043 · Cited by 494
Biodegradable materials for bone defect repair
Wei, S., Ma, J.-X., Xu, L., Gu, X.-S., & Ma, X.-L. (2020) · Military Medical Research · doi:10.1186/s40779-020-00280-6 · Cited by 406
Arif, Z. U., Khalid, M. Y., Noroozi, R., Sadeghianmaryan, A., Jalalvand, M., & Hossain, M. (2022) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2022.07.140 · Cited by 395
Metadata
- Authors
- Zhang, L., Yang, G., Johnson, B. N., & Jia, X.
- Venue
- Acta Biomaterialia
- Publisher
- Elsevier BV
- Published
- 2019-01
- Volume
- 84
- Pages
- 16-33
- ISSN
- 1742-7061 (ISSN-L)
- OpenAlex
- W2901631637
- Cited by
- 865
- References
- 184
- FWCI
- 21.42
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.