The DOI matches its Crossref record; 408 of the 408 references it cites were found in a registry or an index.
Additive manufacturing of metallic lattice structures: Unconstrained design, accurate fabrication, fascinated performances, and challenges
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Generating optimal topologies in structural design using a homogenization method
Bendsøe, M. P., & Kikuchi, N. (1988) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/0045-7825(88)90086-2 · Cited by 7,467
Porosity of 3D biomaterial scaffolds and osteogenesis
Karageorgiou, V., & Kaplan, D. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2005.02.002 · Cited by 6,622
Metal Additive Manufacturing: A Review
Frazier, W. E. (2014) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-014-0958-z · Cited by 5,984
Ti based biomaterials, the ultimate choice for orthopaedic implants – A review
Geetha, M., Singh, A. K., Asokamani, R., & Gogia, A. K. (2009) · Progress in Materials Science · doi:10.1016/j.pmatsci.2008.06.004 · Cited by 5,416
Additive manufacturing of metals
Herzog, D., Seyda, V., Wycisk, E., & Emmelmann, C. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.07.019 · Cited by 4,759
Foam Structures with a Negative Poisson's Ratio
Lakes, R. (1987) · Science · doi:10.1126/science.235.4792.1038 · Cited by 3,866
Manufacture, characterisation and application of cellular metals and metal foams
Banhart, J. (2001) · Progress in Materials Science · doi:10.1016/s0079-6425(00)00002-5 · Cited by 3,780
A level set method for structural topology optimization
Wang, M. Y., Wang, X., & Guo, D. (2003) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/s0045-7825(02)00559-5 · Cited by 3,232
Laser additive manufacturing of metallic components: materials, processes and mechanisms
Gu, D. D., Meiners, W., Wissenbach, K., & Poprawe, R. (2012) · International Materials Reviews · doi:10.1179/1743280411y.0000000014 · Cited by 3,197
Material interpolation schemes in topology optimization
Bendsøe, M. P., & Sigmund, O. (1999) · Archive of Applied Mechanics (Ingenieur Archiv) · doi:10.1007/s004190050248 · Cited by 2,827
Grasshopper Optimisation Algorithm: Theory and application
Saremi, S., Mirjalili, S., & Lewis, A. (2017) · Advances in Engineering Software · doi:10.1016/j.advengsoft.2017.01.004 · Cited by 2,727
A simple evolutionary procedure for structural optimization
Xie, Y. M., & Steven, G. P. (1993) · Computers & Structures · doi:10.1016/0045-7949(93)90035-c · Cited by 2,707
Mechanical properties and the hierarchical structure of bone
Rho, J.-Y., Kuhn-Spearing, L., & Zioupos, P. (1998) · Medical Engineering & Physics · doi:10.1016/s1350-4533(98)00007-1 · Cited by 2,588
A review on stereolithography and its applications in biomedical engineering
Melchels, F. P. W., Feijen, J., & Grijpma, D. W. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.04.050 · Cited by 2,457
Ultralight, ultrastiff mechanical metamaterials
Zheng, X., Lee, H., Weisgraber, T. H., Shusteff, M., DeOtte, J., Duoss, E. B., Kuntz, J. D., Biener, M. M., Ge, Q., Jackson, J. A., et al. (2014) · Science · doi:10.1126/science.1252291 · Cited by 2,308
Recent advances in bone tissue engineering scaffolds
Bose, S., Roy, M., & Bandyopadhyay, A. (2012) · Trends in Biotechnology · doi:10.1016/j.tibtech.2012.07.005 · Cited by 2,206
Mechanical properties of biomedical titanium alloys
Niinomi, M. (1998) · Materials Science and Engineering: A · doi:10.1016/s0921-5093(97)00806-x · Cited by 2,157
Wang, X., Xu, S., Zhou, S., Xu, W., Leary, M., Choong, P., Qian, M., Brandt, M., & Xie, Y. M. (2016) · Biomaterials · doi:10.1016/j.biomaterials.2016.01.012 · Cited by 2,121
Additive manufacturing: technology, applications and research needs
Guo, N., & Leu, M. C. (2013) · Frontiers of Mechanical Engineering · doi:10.1007/s11465-013-0248-8 · Cited by 2,073
Vrancken, B., Thijs, L., Kruth, J.-P., & Van Humbeeck, J. (2012) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2012.07.022 · Cited by 1,896
Ultralight Metallic Microlattices
Schaedler, T. A., Jacobsen, A. J., Torrents, A., Sorensen, A. E., Lian, J., Greer, J. R., Valdevit, L., & Carter, W. B. (2011) · Science · doi:10.1126/science.1211649 · Cited by 1,784
The properties of foams and lattices
Ashby, M. F. (2006) · Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences · doi:10.1098/rsta.2005.1678 · Cited by 1,771
Olakanmi, E. O., Cochrane, R. F., & Dalgarno, K. W. (2015) · Progress in Materials Science · doi:10.1016/j.pmatsci.2015.03.002 · Cited by 1,742
Effective properties of the octet-truss lattice material
Deshpande, V. S., Fleck, N. A., & Ashby, M. F. (2001) · Journal of the Mechanics and Physics of Solids · doi:10.1016/s0022-5096(01)00010-2 · Cited by 1,741
Direct Ink Writing of 3D Functional Materials
Lewis, J. A. (2006) · Advanced Functional Materials · doi:10.1002/adfm.200600434 · Cited by 1,740
SLM lattice structures: Properties, performance, applications and challenges
Maconachie, T., Leary, M., Lozanovski, B., Zhang, X., Qian, M., Faruque, O., & Brandt, M. (2019) · Materials & Design · doi:10.1016/j.matdes.2019.108137 · Cited by 1,497
Binding mechanisms in selective laser sintering and selective laser melting
Kruth, J., Mercelis, P., Van Vaerenbergh, J., Froyen, L., & Rombouts, M. (2005) · Rapid Prototyping Journal · doi:10.1108/13552540510573365 · Cited by 1,383
Design and mechanical properties of new β type titanium alloys for implant materials
Kuroda, D., Niinomi, M., Morinaga, M., Kato, Y., & Yashiro, T. (1998) · Materials Science and Engineering A · doi:10.1016/s0921-5093(97)00808-3 · Cited by 1,323
Highly compressible 3D periodic graphene aerogel microlattices
Zhu, C., Han, T. Y.-J., Duoss, E. B., Golobic, A. M., Kuntz, J. D., Spadaccini, C. M., & Worsley, M. A. (2015) · Nature Communications · doi:10.1038/ncomms7962 · Cited by 1,148
A Review on Biomedical Titanium Alloys: Recent Progress and Prospect
Zhang, L., & Chen, L. (2019) · Advanced Engineering Materials · doi:10.1002/adem.201801215 · Cited by 1,100
Self-citationManufacturing and processing of NiTi implants: A review
Elahinia, M. H., Hashemi, M., Tabesh, M., & Bhaduri, S. B. (2012) · Progress in Materials Science · doi:10.1016/j.pmatsci.2011.11.001 · Cited by 1,067
Multidisciplinary aerospace design optimization: survey of recent developments
Sobieszczanski-Sobieski, J., & Haftka, R. T. (1997) · Structural Optimization · doi:10.1007/bf01197554 · Cited by 1,052
New Developments of Ti-Based Alloys for Biomedical Applications
Li, Y., Yang, C., Zhao, H., Qu, S., Li, X., & Li, Y. (2014) · Materials · doi:10.3390/ma7031709 · Cited by 1,048
Additive manufacturing of multi-material structures
Bandyopadhyay, A., & Heer, B. (2018) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2018.04.001 · Cited by 1,029
Topology Optimization in Aircraft and Aerospace Structures Design
Zhu, J.-H., Zhang, W.-H., & Xia, L. (2016) · Archives of Computational Methods in Engineering · doi:10.1007/s11831-015-9151-2 · Cited by 980
3D Printing of Free Standing Liquid Metal Microstructures
Ladd, C., So, J., Muth, J., & Dickey, M. D. (2013) · Advanced Materials · doi:10.1002/adma.201301400 · Cited by 926
Mechanical metamaterials at the theoretical limit of isotropic elastic stiffness
Berger, J. B., Wadley, H. N. G., & McMeeking, R. M. (2017) · Nature · doi:10.1038/nature21075 · Cited by 914
Multifunctional Mechanical Metamaterials Based on Triply Periodic Minimal Surface Lattices
Al-Ketan, O., & Abu Al-Rub, R. K. (2019) · Advanced Engineering Materials · doi:10.1002/adem.201900524 · Cited by 887
A review of topology optimization for additive manufacturing: Status and challenges
ZHU, J., ZHOU, H., WANG, C., ZHOU, L., YUAN, S., & ZHANG, W. (2021) · Chinese Journal of Aeronautics · doi:10.1016/j.cja.2020.09.020 · Cited by 874
Bobbert, F. S. L., Lietaert, K., Eftekhari, A. A., Pouran, B., Ahmadi, S. M., Weinans, H., & Zadpoor, A. A. (2017) · Acta Biomaterialia · doi:10.1016/j.actbio.2017.02.024 · Cited by 873
Three-Dimensional Printing: Rapid Tooling and Prototypes Directly from a CAD Model
Sachs, E., Cima, M., & Cornie, J. (1990) · CIRP Annals · doi:10.1016/s0007-8506(07)61035-x · Cited by 871
Current and future trends in topology optimization for additive manufacturing
Liu, J., Gaynor, A. T., Chen, S., Kang, Z., Suresh, K., Takezawa, A., Li, L., Kato, J., Tang, J., Wang, C. C. L., et al. (2018) · Structural and Multidisciplinary Optimization · doi:10.1007/s00158-018-1994-3 · Cited by 870
Li, W., Li, S., Liu, J., Zhang, A., Zhou, Y., Wei, Q., Yan, C., & Shi, Y. (2016) · Materials Science and Engineering: A · doi:10.1016/j.msea.2016.03.088 · Cited by 850
Qiu, C., Adkins, N. J. E., & Attallah, M. M. (2013) · Materials Science and Engineering: A · doi:10.1016/j.msea.2013.04.099 · Cited by 821
Heinl, P., Müller, L., Körner, C., Singer, R. F., & Müller, F. A. (2008) · Acta Biomaterialia · doi:10.1016/j.actbio.2008.03.013 · Cited by 815
Denudation of metal powder layers in laser powder bed fusion processes
Matthews, M. J., Guss, G., Khairallah, S. A., Rubenchik, A. M., Depond, P. J., & King, W. E. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.05.017 · Cited by 809
Tancogne-Dejean, T., Spierings, A. B., & Mohr, D. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.05.054 · Cited by 806
Huang, R., Riddle, M., Graziano, D., Warren, J., Das, S., Nimbalkar, S., Cresko, J., & Masanet, E. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2015.04.109 · Cited by 805
Directed Energy Deposition (DED) Process: State of the Art
Ahn, D.-G. (2021) · International Journal of Precision Engineering and Manufacturing-Green Technology · doi:10.1007/s40684-020-00302-7 · Cited by 803
Fabrication and structural performance of periodic cellular metal sandwich structures
Wadley, H. (2003) · Composites Science and Technology · doi:10.1016/s0266-3538(03)00266-5 · Cited by 800
Fundamental aspects of hot isostatic pressing: An overview
Atkinson, H. V., & Davies, S. (2000) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-000-0078-2 · Cited by 784
Cold spray coating: review of material systems and future perspectives
Moridi, A., Hassani-Gangaraj, S. M., Guagliano, M., & Dao, M. (2014) · Surface Engineering · doi:10.1179/1743294414y.0000000270 · Cited by 754
Manufacture by selective laser melting and mechanical behavior of commercially pure titanium
Attar, H., Calin, M., Zhang, L. C., Scudino, S., & Eckert, J. (2014) · Materials Science and Engineering: A · doi:10.1016/j.msea.2013.11.038 · Cited by 744
Self-citationEvaluations of cellular lattice structures manufactured using selective laser melting
Yan, C., Hao, L., Hussein, A., & Raymont, D. (2012) · International Journal of Machine Tools and Manufacture · doi:10.1016/j.ijmachtools.2012.06.002 · Cited by 730
Zhang, L., & Attar, H. (2016) · Advanced Engineering Materials · doi:10.1002/adem.201500419 · Cited by 721
Self-citationReview of additive manufacturing technologies and applications in the aerospace industry
Najmon, J. C., Raeisi, S., & Tovar, A. (2019) · Additive Manufacturing for the Aerospace Industry · doi:10.1016/b978-0-12-814062-8.00002-9 · Cited by 719
Yan, C., Hao, L., Hussein, A., & Young, P. (2015) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2015.06.024 · Cited by 717
Lu, K. (2010) · Science · doi:10.1126/science.1185866 · Cited by 717
A critical review on the fused deposition modeling of thermoplastic polymer composites
Penumakala, P. K., Santo, J., & Thomas, A. (2020) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2020.108336 · Cited by 704
Plocher, J., & Panesar, A. (2019) · Materials & Design · doi:10.1016/j.matdes.2019.108164 · Cited by 669
Processing of biocompatible porous Ti and Mg
Wen, C. E., Mabuchi, M., Yamada, Y., Shimojima, K., Chino, Y., & Asahina, T. (2001) · Scripta Materialia · doi:10.1016/s1359-6462(01)01132-0 · Cited by 665
Li, X. P., Wang, X. J., Saunders, M., Suvorova, A., Zhang, L. C., Liu, Y. J., Fang, M. H., Huang, Z. H., & Sercombe, T. B. (2015) · Acta Materialia · doi:10.1016/j.actamat.2015.05.017 · Cited by 654
Self-citationHan, L., & Che, S. (2018) · Advanced Materials · doi:10.1002/adma.201705708 · Cited by 624
Yan, C., Hao, L., Hussein, A., Young, P., & Raymont, D. (2014) · Materials & Design · doi:10.1016/j.matdes.2013.10.027 · Cited by 622
Manufacture by selective laser melting and mechanical behavior of a biomedical Ti–24Nb–4Zr–8Sn alloy
Zhang, L., Klemm, D., Eckert, J., Hao, Y., & Sercombe, T. B. (2011) · Scripta Materialia · doi:10.1016/j.scriptamat.2011.03.024 · Cited by 597
Self-citationYuan, L., Ding, S., & Wen, C. (2019) · Bioactive Materials · doi:10.1016/j.bioactmat.2018.12.003 · Cited by 593
Attar, H., Bönisch, M., Calin, M., Zhang, L.-C., Scudino, S., & Eckert, J. (2014) · Acta Materialia · doi:10.1016/j.actamat.2014.05.022 · Cited by 585
Self-citationLiu, Y. J., Li, S. J., Wang, H. L., Hou, W. T., Hao, Y. L., Yang, R., Sercombe, T. B., & Zhang, L. C. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.04.029 · Cited by 584
Self-citationArabnejad, S., Burnett Johnston, R., Pura, J. A., Singh, B., Tanzer, M., & Pasini, D. (2016) · Acta Biomaterialia · doi:10.1016/j.actbio.2015.10.048 · Cited by 578
Three Dimensional Printing: Rapid Tooling and Prototypes Directly from a CAD Model
Sachs, E., Cima, M., Williams, P., Brancazio, D., & Cornie, J. (1992) · Journal of Engineering for Industry · doi:10.1115/1.2900701 · Cited by 573
Infill Optimization for Additive Manufacturing—Approaching Bone-Like Porous Structures
Wu, J., Aage, N., Westermann, R., & Sigmund, O. (2017) · IEEE Transactions on Visualization and Computer Graphics · doi:10.1109/tvcg.2017.2655523 · Cited by 572
Corrosion behavior of selective laser melted Ti-6Al-4 V alloy in NaCl solution
Dai, N., Zhang, L.-C., Zhang, J., Chen, Q., & Wu, M. (2016) · Corrosion Science · doi:10.1016/j.corsci.2015.10.041 · Cited by 570
Self-citationMetallic foams: their production, properties and applications
Davies, G. J., & Zhen, S. (1983) · Journal of Materials Science · doi:10.1007/bf00554981 · Cited by 561
Antibacterial metals and alloys for potential biomedical implants
Zhang, E., Zhao, X., Hu, J., Wang, R., Fu, S., & Qin, G. (2021) · Bioactive Materials · doi:10.1016/j.bioactmat.2021.01.030 · Cited by 552
Smith, M., Guan, Z., & Cantwell, W. J. (2013) · International Journal of Mechanical Sciences · doi:10.1016/j.ijmecsci.2012.12.004 · Cited by 545
Applications of additive manufacturing in the construction industry – A forward-looking review
Delgado Camacho, D., Clayton, P., O'Brien, W. J., Seepersad, C., Juenger, M., Ferron, R., & Salamone, S. (2018) · Automation in Construction · doi:10.1016/j.autcon.2017.12.031 · Cited by 538
Kruth, J.-P., Deckers, J., Yasa, E., & Wauthlé, R. (2012) · Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture · doi:10.1177/0954405412437085 · Cited by 532
Al-saedi, D. S. J., Masood, S. H., Faizan‐Ur‐Rab, M., Alomarah, A., & Ponnusamy, P. (2018) · Materials & Design · doi:10.1016/j.matdes.2018.01.059 · Cited by 527
Inoculation Treatment of an Additively Manufactured 2024 Aluminium Alloy with Titanium Nanoparticles
Tan, Q., Zhang, J., Sun, Q., Fan, Z., Li, G., Yin, Y. J., Liu, Y., & Zhang, M. (2020) · Acta Materialia · doi:10.1016/j.actamat.2020.06.026 · Cited by 527
Self-citationSelective laser melting (SLM) of AlSi12Mg lattice structures
Leary, M., Mazur, M., Elambasseril, J., McMillan, M., Chirent, T., Sun, Y., Qian, M., Easton, M., & Brandt, M. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.02.127 · Cited by 525
Additive Manufacturing of Metallic Materials: A Review
Zhang, Y., Wu, L., Guo, X., Kane, S., Deng, Y., Jung, Y.-G., Lee, J.-H., & Zhang, J. (2018) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-017-2747-y · Cited by 521
Lai, Y., Li, Y., Cao, H., Long, J., Wang, X., Li, L., Li, C., Jia, Q., Teng, B., Tang, T., et al. (2019) · Biomaterials · doi:10.1016/j.biomaterials.2019.01.013 · Cited by 521
Tancogne‐Dejean, T., Diamantopoulou, M., Gorji, M. B., Bonatti, C., & Mohr, D. (2018) · Advanced Materials · doi:10.1002/adma.201803334 · Cited by 506
Balla, V. K., Bodhak, S., Bose, S., & Bandyopadhyay, A. (2010) · Acta Biomaterialia · doi:10.1016/j.actbio.2010.01.046 · Cited by 504
Developments in investment casting process—A review
Pattnaik, S., Karunakar, D. B., & Jha, P. K. (2012) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2012.06.003 · Cited by 501
Powders for powder bed fusion: a review
Vock, S., Klöden, B., Kirchner, A., Weißgärber, T., & Kieback, B. (2019) · Progress in Additive Manufacturing · doi:10.1007/s40964-019-00078-6 · Cited by 500
Liu, Y., Yang, Y., Mai, S., Wang, D., & Song, C. (2015) · Materials & Design · doi:10.1016/j.matdes.2015.08.086 · Cited by 498
Self-citationParra-Cabrera, C., Achille, C., Kuhn, S., & Ameloot, R. (2018) · Chemical Society Reviews · doi:10.1039/c7cs00631d · Cited by 493
Indentability of Conventional and Negative Poisson's Ratio Foams
Lakes, R. S., & Elms, K. (1993) · Journal of Composite Materials · doi:10.1177/002199839302701203 · Cited by 492
Additive Manufacturing of Titanium Alloys by Electron Beam Melting: A Review
Zhang, L., Liu, Y., Li, S., & Hao, Y. (2018) · Advanced Engineering Materials · doi:10.1002/adem.201700842 · Cited by 486
Self-citationRecent Advances on High‐Entropy Alloys for 3D Printing
Han, C., Fang, Q., Shi, Y., Tor, S. B., Chua, C. K., & Zhou, K. (2020) · Advanced Materials · doi:10.1002/adma.201903855 · Cited by 486
Analysis of the elastic properties of open-cell foams with tetrakaidecahedral cells
Zhu, H. X., Knott, J. F., & Mills, N. J. (1997) · Journal of the Mechanics and Physics of Solids · doi:10.1016/s0022-5096(96)00090-7 · Cited by 485
Direct writing technology—Advances and developments
Hon, K. K. B., Li, L., & Hutchings, I. M. (2008) · CIRP Annals · doi:10.1016/j.cirp.2008.09.006 · Cited by 485
Overview of transient liquid phase and partial transient liquid phase bonding
Cook, G. O., & Sorensen, C. D. (2011) · Journal of Materials Science · doi:10.1007/s10853-011-5561-1 · Cited by 473
A review about the engineering design of optimal heat transfer systems using topology optimization
Dbouk, T. (2017) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2016.10.134 · Cited by 469
Leary, M., Mazur, M., Williams, H., Yang, E., Alghamdi, A., Lozanovski, B., Zhang, X., Shidid, D., Farahbod-Sternahl, L., Witt, G., et al. (2018) · Materials & Design · doi:10.1016/j.matdes.2018.06.010 · Cited by 456
Zhang, L.-C., Chen, L.-Y., & Wang, L. (2020) · Advanced Engineering Materials · doi:10.1002/adem.201901258 · Cited by 456
Self-citationLow stiffness porous Ti structures for load-bearing implants
Krishna, B. V., Bose, S., & Bandyopadhyay, A. (2007) · Acta Biomaterialia · doi:10.1016/j.actbio.2007.03.008 · Cited by 441
Fused deposition modelling: a review
Vyavahare, S., Teraiya, S., Panghal, D., & Kumar, S. (2019) · Rapid Prototyping Journal · doi:10.1108/rpj-04-2019-0106 · Cited by 438
Amin Yavari, S., Ahmadi, S. M., Wauthle, R., Pouran, B., Schrooten, J., Weinans, H., & Zadpoor, A. A. (2015) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2014.12.015 · Cited by 431
A review on functionally graded structures and materials for energy absorption
Xu, F., Zhang, X., & Zhang, H. (2018) · Engineering Structures · doi:10.1016/j.engstruct.2018.05.094 · Cited by 421
Xia, L., Xia, Q., Huang, X., & Xie, Y. M. (2016) · Archives of Computational Methods in Engineering · doi:10.1007/s11831-016-9203-2 · Cited by 419
Additively manufactured porous tantalum implants
Wauthle, R., van der Stok, J., Amin Yavari, S., Van Humbeeck, J., Kruth, J.-P., Zadpoor, A. A., Weinans, H., Mulier, M., & Schrooten, J. (2015) · Acta Biomaterialia · doi:10.1016/j.actbio.2014.12.003 · Cited by 417
Design of compliant mechanisms using continuum topology optimization: A review
Zhu, B., Zhang, X., Zhang, H., Liang, J., Zang, H., Li, H., & Wang, R. (2020) · Mechanism and Machine Theory · doi:10.1016/j.mechmachtheory.2019.103622 · Cited by 417
The influence of additive manufacturing processing parameters on surface roughness and fatigue life
Gockel, J., Sheridan, L., Koerper, B., & Whip, B. (2019) · International Journal of Fatigue · doi:10.1016/j.ijfatigue.2019.03.025 · Cited by 405
Ahmadi, S., Yavari, S., Wauthle, R., Pouran, B., Schrooten, J., Weinans, H., & Zadpoor, A. (2015) · Materials · doi:10.3390/ma8041871 · Cited by 399
Additively manufactured biodegradable porous magnesium
Li, Y., Zhou, J., Pavanram, P., Leeflang, M. A., Fockaert, L. I., Pouran, B., Tümer, N., Schröder, K.-U., Mol, J. M. C., Weinans, H., et al. (2018) · Acta Biomaterialia · doi:10.1016/j.actbio.2017.12.008 · Cited by 396
Wire Metamaterials: Physics and Applications
Simovski, C. R., Belov, P. A., Atrashchenko, A. V., & Kivshar, Y. S. (2012) · Advanced Materials · doi:10.1002/adma.201200931 · Cited by 390
Qiu, C., Yue, S., Adkins, N. J. E., Ward, M., Hassanin, H., Lee, P. D., Withers, P. J., & Attallah, M. M. (2015) · Materials Science and Engineering: A · doi:10.1016/j.msea.2015.01.031 · Cited by 385
Ataee, A., Li, Y., Brandt, M., & Wen, C. (2018) · Acta Materialia · doi:10.1016/j.actamat.2018.08.005 · Cited by 383
Evaluation of topology-optimized lattice structures manufactured via selective laser melting
Xiao, Z., Yang, Y., Xiao, R., Bai, Y., Song, C., & Wang, D. (2018) · Materials & Design · doi:10.1016/j.matdes.2018.01.023 · Cited by 380
Kadkhodapour, J., Montazerian, H., Darabi, A., Anaraki, A. P., Ahmadi, S. M., ZADPOOR, A. A., & Schmauder, S. (2015) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2015.06.012 · Cited by 376
Mechanical Property Optimization of FDM PLA in Shear with Multiple Objectives
Torres, J., Cotelo, J., Karl, J., & Gordon, A. P. (2015) · JOM · doi:10.1007/s11837-015-1367-y · Cited by 374
Fatigue behavior and failure mechanisms of direct laser deposited Ti–6Al–4V
Sterling, A. J., Torries, B., Shamsaei, N., Thompson, S. M., & Seely, D. W. (2015) · Materials Science and Engineering A · doi:10.1016/j.msea.2015.12.026 · Cited by 372
Design, analysis and manufacturing of lattice structures: an overview
Helou, M., & Kara, S. (2018) · International Journal of Computer Integrated Manufacturing · doi:10.1080/0951192x.2017.1407456 · Cited by 370
Liu, Y. J., Wang, H. L., Li, S. J., Wang, S. G., Wang, W. J., Hou, W. T., Hao, Y. L., Yang, R., & Zhang, L. C. (2017) · Acta Materialia · doi:10.1016/j.actamat.2016.12.052 · Cited by 368
Self-citationYang, L., Yan, C., Cao, W., Liu, Z., Song, B., Wen, S., Zhang, C., Shi, Y., & Yang, S. (2019) · Acta Materialia · doi:10.1016/j.actamat.2019.09.042 · Cited by 364
Wei, P., Li, Z., Li, X., & Wang, M. Y. (2018) · Structural and Multidisciplinary Optimization · doi:10.1007/s00158-018-1904-8 · Cited by 361
Li, S. J., Xu, Q. S., Wang, Z., Hou, W. T., Hao, Y. L., Yang, R., & Murr, L. E. (2014) · Acta Biomaterialia · doi:10.1016/j.actbio.2014.06.010 · Cited by 360
Fatigue behavior of porous biomaterials manufactured using selective laser melting
Amin Yavari, S., Wauthle, R., van der Stok, J., Riemslag, A. C., Janssen, M., Mulier, M., Kruth, J. P., Schrooten, J., Weinans, H., & Zadpoor, A. A. (2013) · Materials Science and Engineering: C · doi:10.1016/j.msec.2013.08.006 · Cited by 357
Gradient in microstructure and mechanical property of selective laser melted AlSi10Mg
Liu, Y., Liu, Z., Jiang, Y., Wang, G. W., Yang, Y., & Zhang, L. (2017) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2017.11.020 · Cited by 352
Self-citationDesign of lattice structures with controlled anisotropy
Xu, S., Shen, J., Zhou, S., Huang, X., & Xie, Y. M. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.01.007 · Cited by 351
Yadroitsev, I., & Yadroitsava, I. (2015) · Virtual and Physical Prototyping · doi:10.1080/17452759.2015.1026045 · Cited by 349
Ceramic Robocasting: Recent Achievements, Potential, and Future Developments
Peng, E., Zhang, D., & Ding, J. (2018) · Advanced Materials · doi:10.1002/adma.201802404 · Cited by 347
Microstructure and mechanical behavior of porous Ti–6Al–4V parts obtained by selective laser melting
Sallica-Leva, E., Jardini, A. L., & Fogagnolo, J. B. (2013) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2013.05.011 · Cited by 340
Porous titanium scaffolds fabricated using a rapid prototyping and powder metallurgy technique
Ryan, G. E., Pandit, A. S., & Apatsidis, D. P. (2008) · Biomaterials · doi:10.1016/j.biomaterials.2008.05.032 · Cited by 340
An investigation into reinforced and functionally graded lattice structures
Maskery, I., Hussey, A., Panesar, A., Aremu, A., Tuck, C., Ashcroft, I., & Hague, R. (2017) · Journal of Cellular Plastics · doi:10.1177/0021955x16639035 · Cited by 339
Creating Lithium‐Ion Electrolytes with Biomimetic Ionic Channels in Metal–Organic Frameworks
Shen, L., Wu, H. B., Liu, F., Brosmer, J. L., Shen, G., Wang, X., Zink, J. I., Xiao, Q., Cai, M., Wang, G., et al. (2018) · Advanced Materials · doi:10.1002/adma.201707476 · Cited by 333
Review: The Impact of Metal Additive Manufacturing on the Aerospace Industry
Mohd Yusuf, S., Cutler, S., & Gao, N. (2019) · Metals · doi:10.3390/met9121286 · Cited by 332
Manufacturing routes for metallic foams
Banhart, J. (2000) · JOM · doi:10.1007/s11837-000-0062-8 · Cited by 332
Cao, X., Duan, S., Liang, J., Wen, W., & Fang, D. (2018) · International Journal of Mechanical Sciences · doi:10.1016/j.ijmecsci.2018.07.006 · Cited by 332
Additive Manufacturing for the Aerospace Industry
(2019) · Elsevier eBooks · doi:10.1016/c2017-0-00712-7 · Cited by 331
Lei, H., Li, C., Meng, J., Zhou, H., Liu, Y., Zhang, X., Wang, P., & Fang, D. (2019) · Materials & Design · doi:10.1016/j.matdes.2019.107685 · Cited by 331
Self-citationBonatti, C., & Mohr, D. (2019) · Journal of the Mechanics and Physics of Solids · doi:10.1016/j.jmps.2018.08.022 · Cited by 330
Recent Development in Beta Titanium Alloys for Biomedical Applications
Chen, L.-Y., Cui, Y.-W., & Zhang, L.-C. (2020) · Metals · doi:10.3390/met10091139 · Cited by 330
Self-citationCheng, X. Y., Li, S. J., Murr, L. E., Zhang, Z. B., Hao, Y. L., Yang, R., Medina, F., & Wicker, R. B. (2012) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2012.10.005 · Cited by 329
A New Type of Low Density Material: Shellular
Han, S. C., Lee, J. W., & Kang, K. (2015) · Advanced Materials · doi:10.1002/adma.201501546 · Cited by 328
Passive Layers and Corrosion Resistance of Biomedical Ti-6Al-4V and β-Ti Alloys
Bocchetta, P., Chen, L., Tardelli, J. D. C., dos Reis, A. C., Almeraya-Calderón, F., & Leo, P. (2021) · Coatings · doi:10.3390/coatings11050487 · Cited by 327
Self-citationBai, Y., Wagner, G., & Williams, C. B. (2017) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4036640 · Cited by 314
Zhang, L.-C., Jia, Z., Lyu, F., Liang, S.-X., & Lu, J. (2019) · Progress in Materials Science · doi:10.1016/j.pmatsci.2019.100576 · Cited by 312
Self-citationRapid prototyping and tooling techniques: a review of applications for rapid investment casting
Cheah, C. M., Chua, C. K., Lee, C.-W., Feng, C., & Totong, K. (2004) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-003-1840-6 · Cited by 310
Transient Liquid Phase Bonding
MacDonald, W. D., & Eagar, T. W. (1992) · Annual Review of Materials Science · doi:10.1146/annurev.ms.22.080192.000323 · Cited by 310
Surface Modification of Ti6Al4V Open Porous Structures Produced by Additive Manufacturing
Pyka, G., Burakowski, A., Kerckhofs, G., Moesen, M., Van Bael, S., Schrooten, J., & Wevers, M. (2012) · Advanced Engineering Materials · doi:10.1002/adem.201100344 · Cited by 309
The structural performance of near-optimized truss core panels
Chiras, S., Mumm, D. R., Evans, A. G., Wicks, N., Hutchinson, J. W., Dharmasena, K. P., Wadley, H. N. G., & Fichter, S. (2002) · International Journal of Solids and Structures · doi:10.1016/s0020-7683(02)00241-x · Cited by 307
Environmental assessment of additive manufacturing in the automotive industry
Böckin, D., & Tillman, A.-M. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.04.086 · Cited by 307
Rokni, M. R., Nutt, S. R., Widener, C. A., Champagne, V. K., & Hrabe, R. H. (2017) · Journal of Thermal Spray Technology · doi:10.1007/s11666-017-0575-0 · Cited by 304
Additive manufacturing of biodegradable metals: Current research status and future perspectives
Qin, Y., Wen, P., Guo, H., Xia, D., Zheng, Y., Jauer, L., Poprawe, R., Voshage, M., & Schleifenbaum, J. H. (2019) · Acta Biomaterialia · doi:10.1016/j.actbio.2019.04.046 · Cited by 303
Binder jetting of ceramics: Powders, binders, printing parameters, equipment, and post-treatment
Lv, X., Ye, F., Cheng, L., Fan, S., & Liu, Y. (2019) · Ceramics International · doi:10.1016/j.ceramint.2019.04.012 · Cited by 302
Self-citationAdditive layer manufacturing of poly (ether ether ketone) via FDM
Rinaldi, M., Ghidini, T., Cecchini, F., Brandao, A., & Nanni, F. (2018) · Composites Part B Engineering · doi:10.1016/j.compositesb.2018.03.029 · Cited by 301
Moon, S. K., Tan, Y. E., Hwang, J., & Yoon, Y.-J. (2014) · International Journal of Precision Engineering and Manufacturing-Green Technology · doi:10.1007/s40684-014-0028-x · Cited by 299
Additively manufactured biodegradable porous iron
Li, Y., Jahr, H., Lietaert, K., Pavanram, P., Yilmaz, A., Fockaert, L. I., Leeflang, M. A., Pouran, B., Gonzalez-Garcia, Y., Weinans, H., et al. (2018) · Acta Biomaterialia · doi:10.1016/j.actbio.2018.07.011 · Cited by 299
Porous scaffold design using the distance field and triply periodic minimal surface models
Yoo, D. J. (2011) · Biomaterials · doi:10.1016/j.biomaterials.2011.07.019 · Cited by 298
Yuan, S., Shen, F., Bai, J., Chua, C. K., Wei, J., & Zhou, K. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.01.098 · Cited by 295
Afshar, M., Anaraki, A. P., Montazerian, H., & Kadkhodapour, J. (2016) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2016.05.027 · Cited by 289
Fabrication of Ti-6Al-4V Scaffolds by Direct Metal Deposition
Dinda, G. P., Song, L., & Mazumder, J. (2008) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-008-9634-y · Cited by 288
Gümrük, R., Mines, R. A. W., & Karadeniz, S. (2013) · Materials Science and Engineering A · doi:10.1016/j.msea.2013.07.070 · Cited by 288
Anisotropic phase segregation and migration of Pt in nanocrystals en route to nanoframe catalysts
Niu, Z., Becknell, N., Yu, Y., Kim, D., Chen, C., Kornienko, N., Somorjai, G. A., & Yang, P. (2016) · Nature Materials · doi:10.1038/nmat4724 · Cited by 288
Montazerian, H., Davoodi, E., Asadi-Eydivand, M., Kadkhodapour, J., & Solati-Hashjin, M. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.04.009 · Cited by 286
Prashar, G., & Vasudev, H. (2021) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2021.127606 · Cited by 286
Zhang, X. Z., Leary, M., Tang, H. P., Song, T., & Qian, M. (2018) · Current Opinion in Solid State and Materials Science · doi:10.1016/j.cossms.2018.05.002 · Cited by 285
3D-Printed Zeolite Monoliths for CO2 Removal from Enclosed Environments
Thakkar, H., Eastman, S., Hajari, A., Rownaghi, A. A., Knox, J. C., & Rezaei, F. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b09647 · Cited by 284
Wadley, H. N. G. (2002) · Advanced Engineering Materials · doi:10.1002/1527-2648(20021014)4:10<726::aid-adem726>3.0.co;2-y · Cited by 283
Kelly, C. N., Francovich, J., Julmi, S., Safranski, D., Guldberg, R. E., Maier, H. J., & Gall, K. (2019) · Acta Biomaterialia · doi:10.1016/j.actbio.2019.05.046 · Cited by 280
The effect of atmosphere on the structure and properties of a selective laser melted Al–12Si alloy
Wang, X. J., Zhang, L., Fang, M., & Sercombe, T. B. (2014) · Materials Science and Engineering A · doi:10.1016/j.msea.2014.01.012 · Cited by 277
Self-citationDesign of graded lattice structure with optimized mesostructures for additive manufacturing
Wang, Y., Zhang, L., Daynes, S., Zhang, H., Feih, S., & Wang, M. Y. (2018) · Materials & Design · doi:10.1016/j.matdes.2018.01.011 · Cited by 276
Self-citationAdditive manufacturing and postprocessing of Ti-6Al-4V for superior mechanical properties
Qian, M., Xu, W., Brandt, M., & Tang, H. P. (2016) · MRS Bulletin · doi:10.1557/mrs.2016.215 · Cited by 275
An exploration of binder jetting of copper
Bai, Y., & Williams, C. B. (2015) · Rapid Prototyping Journal · doi:10.1108/rpj-12-2014-0180 · Cited by 270
Reversible energy absorbing meta-sandwiches by FDM 4D printing
Bodaghi, M., Serjouei, A., Zolfagharian, A., Fotouhi, M., Rahman, H., & Durand, D. (2020) · International Journal of Mechanical Sciences · doi:10.1016/j.ijmecsci.2020.105451 · Cited by 268
Speirs, M., Van Hooreweder, B., Van Humbeeck, J., & Kruth, J.-P. (2017) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2017.01.016 · Cited by 267
Acoustic Metamaterials: A Review of Theories, Structures, Fabrication Approaches, and Applications
Liao, G., Luan, C., Wang, Z., Liu, J., Yao, X., & Fu, J. (2021) · Advanced Materials Technologies · doi:10.1002/admt.202000787 · Cited by 267
Plotkowski, A., Sisco, K. D., Bahl, S., Shyam, A., Yang, Y., Allard, L. F., Nandwana, P., Rossy, A. M., & Dehoff, R. (2020) · Acta Materialia · doi:10.1016/j.actamat.2020.07.014 · Cited by 266
High temperature deformation behavior and dynamic recrystallization in CoCrFeNiMn high entropy alloy
Stepanov, N. D., Shaysultanov, D. G., Yurchenko, N. Y., Zherebtsov, S. V., Ladygin, A. N., Salishchev, G. A., & Tikhonovsky, M. A. (2015) · Materials Science and Engineering: A · doi:10.1016/j.msea.2015.03.097 · Cited by 262
Zhao, S., Li, S. J., Hou, W. T., Hao, Y. L., Yang, R., & Misra, R. D. K. (2016) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2016.01.034 · Cited by 262
Siddique, S., Imran, M., Wycisk, E., Emmelmann, C., & Walther, F. (2015) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2015.02.023 · Cited by 261
Origami Metamaterials for Tunable Thermal Expansion
Boatti, E., Vasios, N., & Bertoldi, K. (2017) · Advanced Materials · doi:10.1002/adma.201700360 · Cited by 260
Novel processing of iron–manganese alloy-based biomaterials by inkjet 3-D printing
Chou, D.-T., Wells, D., Hong, D., Lee, B., Kuhn, H., & Kumta, P. N. (2013) · Acta Biomaterialia · doi:10.1016/j.actbio.2013.04.016 · Cited by 259
Murr, L. E., Gaytan, S. M., Medina, F., Martinez, E., Martinez, J. L., Hernandez, D. H., Machado, B. I., Ramirez, D. A., & Wicker, R. B. (2010) · Materials Science and Engineering: A · doi:10.1016/j.msea.2009.11.015 · Cited by 258
Laminated Object Manufacturing of 3D‐Printed Laser‐Induced Graphene Foams
Luong, D. X., Subramanian, A. K., Silva, G. A. L., Yoon, J., Cofer, S., Yang, K., Owuor, P. S., Wang, T., Wang, Z., Lou, J., et al. (2018) · Advanced Materials · doi:10.1002/adma.201707416 · Cited by 257
Zhao, M., Liu, F., Fu, G., Zhang, D. Z., Zhang, T., & Zhou, H. (2018) · Materials · doi:10.3390/ma11122411 · Cited by 257
3D Printing of Conductive Complex Structures with In Situ Generation of Silver Nanoparticles
Fantino, E., Chiappone, A., Roppolo, I., Manfredi, D., Bongiovanni, R., Pirri, C. F., & Calignano, F. (2016) · Advanced Materials · doi:10.1002/adma.201505109 · Cited by 253
Yánez, A., Cuadrado, A., Martel, O., Afonso, H., & Monopoli, D. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.11.050 · Cited by 252
Nandwana, P., Elliott, A. M., Siddel, D., Merriman, A., Peter, W. H., & Babu, S. S. (2017) · Current Opinion in Solid State and Materials Science · doi:10.1016/j.cossms.2016.12.002 · Cited by 249
316L Stainless Steel with Gradient Porosity Fabricated by Selective Laser Melting
Li, R., Liu, J., Shi, Y., Du, M., & Xie, Z. (2010) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-009-9535-2 · Cited by 247
Cheng, M.-Q., Wahafu, T., Jiang, G.-F., Liu, W., Qiao, Y.-Q., Peng, X.-C., Cheng, T., Zhang, X.-L., He, G., & Liu, X.-Y. (2016) · Scientific Reports · doi:10.1038/srep24134 · Cited by 247
Additive Manufacturing as a Method to Design and Optimize Bioinspired Structures
Velasco‐Hogan, A., Xu, J., & Meyers, M. A. (2018) · Advanced Materials · doi:10.1002/adma.201800940 · Cited by 247
Active cooling by metallic sandwich structures with periodic cores
LU, T., VALDEVIT, L., & EVANS, A. (2005) · Progress in Materials Science · doi:10.1016/j.pmatsci.2005.03.001 · Cited by 243
Creating metal parts by Fused Deposition Modeling and Sintering
Liu, B., Wang, Y., Lin, Z., & Zhang, T. (2020) · Materials Letters · doi:10.1016/j.matlet.2019.127252 · Cited by 242
Zhou, Z., Buchanan, F., Mitchell, C., & Dunne, N. (2014) · Materials Science and Engineering: C · doi:10.1016/j.msec.2014.01.027 · Cited by 241
Selective Laser Melting of Magnesium and Magnesium Alloy Powders: A Review
Manakari, V., Parande, G., & Gupta, M. (2016) · Metals · doi:10.3390/met7010002 · Cited by 241
Zhao, S., Li, S. J., Wang, S. G., Hou, W. T., Li, Y., Zhang, L. C., Hao, Y. L., Yang, R., Misra, R. D. K., & Murr, L. E. (2018) · Acta Materialia · doi:10.1016/j.actamat.2018.02.060 · Cited by 239
Self-citationWong, M., Owen, I., Sutcliffe, C. J., & Puri, A. (2009) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2008.06.002 · Cited by 236
Realization of an Acoustic Third-Order Topological Insulator
Xue, H., Yang, Y., Liu, G., Gao, F., Chong, Y., & Zhang, B. (2019) · Physical Review Letters · doi:10.1103/physrevlett.122.244301 · Cited by 236
Binder-jetting 3D printing and alloy development of new biodegradable Fe-Mn-Ca/Mg alloys
Hong, D., Chou, D.-T., Velikokhatnyi, O. I., Roy, A., Lee, B., Swink, I., Issaev, I., Kuhn, H. A., & Kumta, P. N. (2016) · Acta Biomaterialia · doi:10.1016/j.actbio.2016.08.032 · Cited by 234
Laser processing of SiC-particle-reinforced coating on titanium
Das, M., Balla, V. K., Basu, D., Bose, S., & Bandyopadhyay, A. (2010) · Scripta Materialia · doi:10.1016/j.scriptamat.2010.04.044 · Cited by 233
Three‐dimensional Printing for Catalytic Applications: Current Status and Perspectives
Zhou, X., & Liu, C. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201701134 · Cited by 231
Development of rapid tooling using fused deposition modeling: a review
Boparai, K. S., Singh, R., & Singh, H. (2016) · Rapid Prototyping Journal · doi:10.1108/rpj-04-2014-0048 · Cited by 229
Morphology, flow and heat transfer in triply periodic minimal surface based porous structures
Cheng, Z., Xu, R., & Jiang, P. (2021) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2021.120902 · Cited by 229
Comparison of Stainless Steel 316L Parts Made by FDM- and SLM-Based Additive Manufacturing Processes
Gong, H., Snelling, D., Kardel, K., & Carrano, A. (2019) · JOM · doi:10.1007/s11837-018-3207-3 · Cited by 227
Density based topology optimization of turbulent flow heat transfer systems
Dilgen, S. B., Dilgen, C. B., Fuhrman, D. R., Sigmund, O., & Lazarov, B. S. (2018) · Structural and Multidisciplinary Optimization · doi:10.1007/s00158-018-1967-6 · Cited by 224
Zhong, T., He, K., Li, H., & Yang, L. (2019) · Materials & Design · doi:10.1016/j.matdes.2019.108076 · Cited by 224
Cited by
Wang, J., Zhu, R., Liu, Y., & Zhang, L. (2023) · Advanced Powder Materials · doi:10.1016/j.apmate.2023.100137 · Cited by 484
Self-citationAdditive manufacturing of heat exchangers in aerospace applications: a review
Careri, F., Khan, R. H. U., Todd, C., & Attallah, M. M. (2023) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2023.121387 · Cited by 320
Metadata
- Authors
- Chen, L.-Y., Liang, S.-X., Liu, Y., & Zhang, L.-C.
- Venue
- Materials Science and Engineering: R: Reports
- Publisher
- Elsevier BV
- Published
- 2021-10
- Volume
- 146
- Pages
- 100648
- ISSN
- 0927-796X (ISSN-L)
- OpenAlex
- W3209402374
- Cited by
- 603
- References
- 408
- FWCI
- 35.70
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.