Green nanoparticle synthesis at scale: a perspective on overcoming the limits of pulsed laser ablation in liquids for high-throughput production
Open accessThe DOI matches its Crossref record; 185 of the 185 references it cites were found in a registry or an index; 18 of the 167 sources its claims cite were checked for support.
Abstract
Nanoparticles have become increasingly important for a variety of applications, including medical diagnosis and treatment, energy harvesting and storage, catalysis, and additive manufacturing. The development of nanoparticles with different compositions, sizes, and surface properties is essential to optimize their performance for specific applications. Pulsed laser ablation in liquid is a green chemistry approach that allows for the production of ligand-free nanoparticles with diverse shapes and phases. Despite these numerous advantages, the current production rate of this method remains limited, with typical rates in the milligram per hour range. To unlock the full potential of this technique for various applications, researchers have dedicated efforts to scaling up production rates to the gram-per-hour range. Achieving this goal necessitates a thorough understanding of the factors that limit pulsed laser ablation in liquid (PLAL) productivity, including laser, target, liquid, chamber, and scanner parameters. This perspective article explores these factors and provides a roadmap for increasing PLAL productivity that can be adapted to specific applications. By carefully controlling these parameters and developing new strategies for scaling up production, researchers can unlock the full potential of pulsed laser ablation in liquids.
Overview
CoChat Summary
TL;DR
This perspective reviews why pulsed laser ablation in liquids (PLAL) typically produces nanoparticles at milligram-per-hour rates and outlines strategies to reach gram-per-hour scale. It argues that optimizing laser, target, liquid, chamber, and scanner parameters—especially picosecond lasers, fast scanning, laminar flow, and thin liquid layers—can enable industrial-scale green nanoparticle synthesis.
Key findings
- PLAL is a green, ligand-free synthesis route, but typical productivity is in the mg h⁻¹ range; the target is g h⁻¹. The paper cites a record of 8 g h⁻¹ for Pt NPs (Waag et al. 2021) and 4 g h⁻¹ for Pt using a 500 W, 10 MHz, 3 ps laser with a polygon scanner.
- Liquid flow increased femtosecond PLAL productivity from 0.79 ± 0.36 mg h⁻¹ (stationary) to 3.0 ± 0.4 mg h⁻¹; a picosecond laser with higher pulse energy and repetition rate reached 31.0 ± 0.4 mg h⁻¹. Reducing liquid layer thickness from 8 to 2.5 mm improved α-Al₂O₃ productivity from 172 to 592 mg h⁻¹. SSTF reduced nonlinear losses by 70% and increased productivity 2.4×. Polygon versus galvanometric scanning gave up to 16, 7, and 11× differences for Au, Pt, and Au₉₀Pt₁₀ targets, respectively.
- Cavitation bubbles and persistent microbubbles shield the laser beam. Higher liquid viscosity (>20 mPa s) reduced ablation yield by a factor of 3 compared with <1 mPa s; wire targets increased productivity up to 2.5× versus bulk targets. Recommended strategies include high-power picosecond lasers, fast scanning to bypass the cavitation bubble, laminar flow, low-viscosity liquid, thin liquid layers, and flow-through chambers.
- Productivity can be defined as mass, power-specific, investment-specific, volume, or mole productivity; for scale-up, the paper recommends gravimetric measurement combined with calibrated optical spectrophotometry.
Methods
- Perspective article, not a primary experimental study; it critically reviews the current status of PLAL productivity and provides a roadmap for upscaling.
- Synthesizes cited literature and prior experimental studies on laser parameters, target morphology, liquid properties, chamber design, scanner technology, and automation.
- Defines productivity metrics and measurement approaches (gravimetric, optical extinction, analytical chemistry) and compares strategies for increasing production.
Limitations
- Stated: unresolved issues remain, including the need for greater automation, remote monitoring/control, improved scanner technology, CFD simulations, temporal pulse tailoring, and further study of LIPSS effects; attosecond pulses have not yet been used for PLAL nanoparticle generation.
- Evident: as a perspective/review, it presents no new experimental data; recommendations depend on material and setup, and the paper notes that optimum liquid layer thickness depends on material and experimental setup, and that extrapolating short ablations to g h⁻¹ can be inaccurate depending on the chamber.
Model-written summary. Check it against the paper before relying on it.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
12 Valid · 4 Not valid · 112 Not checked · 129 Own results and interpretations
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“For this reason, the minimum ablation duration of 5 minutes is required to obtain a reliable gram per-hour value while also accounting for the effect of nanoparticle shielding, 76 target depth variation, persistent microbubbles, 84 and scanning and repetition rate effects.54”
§ Green nanoparticle synthesis at scale: a perspective on overcoming the limits of pulsed laser ablation in liquids for highthroughput production > 3. Definition and measurement of nanoparticle productivity
What the sources say
- Partly supportedcites [76] 76. S. Dittrich, S. Barcikowski and B. Go ¨kce, Plasma and nanoparticle shielding during pulsed laser ablation in liquids cause ablation efficiency decrease, Opto-Electron. Adv., 2021, 4(1), 1-13, DOI: 10.29026/oea.2021.200072. sourceExperimental — accuracy not yet measured
Our copy of Dittrich et al. (2021) does discuss several of the effects the claim lists: nanoparticle/plasma shielding throughout, target-depth (crater) confinement of the cavitation bubble and pulse-number/repetition-rate dependence ('maximal 100 shots are applied on one spot to avoid a pulse number dependent change in the cavitation bubble', Methods and materials; 'once the depth of the drilled hole ... limits the cavitation bubble expansion', p. 200072-6), and persistent microbubbles / NPs trapped in a stationary liquid layer (p. 200072-6; 'Streaks of microbubbles along the beam path', Influence of the focal plane shift). However, no passage states or derives a minimum ablation duration of 5 minutes, or any duration requirement for obtaining a reliable gram-per-hour (gravimetric) productivity value — the paper's productivity measurements are reported without such a time criterion, and scanning effects are not addressed at all (single-spot ablation in a flow chamber at 0.5 Hz). The 5-minute threshold and its linkage to g/h reliability are therefore not supported by this source. (LLM, conf=0.62)
- Not checked — no full text of the sourcecites [84] 84. S. Reich, Patrick Scho ¨nfeld, P. Wagener, A. Letzel, S. Ibrahimkutty, B. Go ¨kce, S. Barcikowski, A. Menzel, T. D. S. Rolo and A. Plech, Pulsed laser ablation in liquids: impact of the bubble dynamics on particle formation, J. Colloid Interface Sci., 2017, 489, 106-113, DOI: 10.1016/ j.jcis.2016.08.030. source
- Partly supportedcites [54] 54. F. Waag, R. Streubel, B. Go ¨kce and S. Barcikowski, Synth- esis of gold, platinum, and gold-platinum alloy nanoparti- cle colloids with high-power megahertz-repetition-rate lasers: the importance of the beam guidance method, Appl. Nanosci., 2021, 11(4), 1303-1312, DOI: 10.1007/s13204-021- 01693-y. sourceExperimental — accuracy not yet measured
The Methods section of Waag et al. (2021) supports the core of the attribution: each LSC run lasted 5 min, and because produced nanoparticle mass increases linearly with ablation duration (shown for the same laser system in Streubel et al. 2016a), ultrafast scanning combined with liquid flow 'allows to extrapolate data from 5 min experiments to g/h statements'. The same paper also covers scanning/repetition-rate effects (Introduction and 'Effect of scan pattern length...', on pulse separation, duty cycle and delivered power) and persistent microbubbles/nanoparticles in the beam path ('Effect of beam guidance method on the productivity of platinum LSC'). Two parts are not supported: nothing in our copy addresses 'target depth variation' (the nearest passage is the ±1 mm tolerable focal-distance deviation of the flat-field image plane, credited to Streubel et al. 2016b), and the paper does not state 5 min as a required minimum duration — it reports its own 5-min run length and a justification for extrapolation, so the citing sentence's normative 'is required' overstates the source. (LLM, conf=0.75)
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Partly supported
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“The benefits from employing laser-synthesized nanomaterials for catalysis, [10][11][12]69,70 biocidal elements, 92,93 bioimaging, 94 and modification of material properties such as the absorption for additive manufacturing 95 has already been proven.”
§ Green nanoparticle synthesis at scale: a perspective on overcoming the limits of pulsed laser ablation in liquids for highthroughput production > 4. Strategies to increase nanoparticle production
What the sources say
- Not matchedcites [10][11][12]
Couldn’t be matched to a paper in Crossref, so it can’t be checked.
- Supportedcites [92] 92. P. F. S. Pereira, A. C. A. de Paula e Silva, B. N. A. da Silva Pimentel, I. M. Pinatti, A. Z. Simo ˜es, C. E. Vergani, D. F. Barreto-Vieira, M. A. N. da Silva, M. D. Miranda, M. E. S. Monteiro, A. Tucci, C. Don ˜ate-Buendı ´a, G. Mı ´nguez-Vega, J. Andre ´s and E. Longo, Inactivation of SARS-CoV-2 by a chitosan/a-Ag 2 WO 4 composite generated by femtosecond laser irradiation, Sci. Rep., 2022, 12(1), 8118, DOI: 10.1038/s41598-022-11902-5. source
This source is cited for the biocidal-elements portion of the sentence, not for catalysis, bioimaging, or additive manufacturing. The Introduction describes improved bactericidal properties after femtosecond-laser irradiation, and the Results and discussion (Biocidal analysis; page unavailable) report reduced SARS-CoV-2 viral titer for the laser-generated composite. (LLM, conf=0.92)
- Supportedcites [95] 95. T. Hupfeld, A. Wegner, M. Blanke, C. Don ˜ate-Buendı ´a, V. Sharov, S. Nieskens, M. Piechotta, M. Giese, S. Barcikowski and B. Go ¨kce, Plasmonic Seasoning: Giving Color to Desktop Laser 3D Printed Polymers by Highly Dispersed Nanoparticles, Adv. Opt. Mater., 2020, 8(15), 2000473, DOI: 10.1002/adom.202000473. source
The clause carried by citation 95 is the modification of material properties (absorption) for additive manufacturing with laser-synthesized nanoparticles, and our copy states exactly that: the Introduction reports that the aim was 'to enhance the light absorption of TPU powders ... by using a small mass fraction of silver nanoparticles' generated by LSPC (laser synthesis and processing of colloids) so that PBF-LB can be done with a 445 nm diode laser, and the Conclusion (p. ~10) confirms the nanoparticles 'act as photothermal sensitizers and enable sintering with a diode laser' at only 0.01 vol% loading, with printed parts showing measurable mechanical properties. The other listed benefits (catalysis, biocidal, bioimaging) are attributed to separate citations ([10]-[12], 69,70, 92,93, 94) and are not part of what this source is offered for; our copy only notes 'high potential' of AgNP-polymer composites in biology, catalysis and electronics (refs 43-46), which does not bear on this citation. (LLM, conf=0.88)
boostedstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Not matched
Every source the paper cites for this claim was checked and supports it.
In the paper
“Wire-type targets (clamped wire and wire tip) showed a productivity increase of up to 2.5 times higher compared to the bulk target.”
§ Green nanoparticle synthesis at scale: a perspective on overcoming the limits of pulsed laser ablation in liquids for highthroughput production > 4.6. Knowing the effect of target morphology
What the sources say
- Supportedcites [100] 100. S. Kohsakowski, B. Go ¨kce, R. Tanabe, P. Wagener, A. Plech, Y. Ito and S. Barcikowski, Target geometry and rigidity determines laser-induced cavitation bubble transport and nanoparticle productivity-a high-speed videography study, Phys. Chem. Chem. Phys., 2016, 18(24), 16585-16593, DOI: 10.1039/c6cp01232a. 101 source
The Results & discussion passage states that productivity for the wire configurations increased by up to a factor of 2.5 compared with the bulk target. It also identifies the two-side clamped wire and wire tip as having productivity at the same level. (LLM, conf=0.94)
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Supported
Every source the paper cites for this claim was checked and supports it.
In the paper
“Nevertheless, the spring-like movement of the wire tip target does not increase the productivity compared to the clamped wire target, due to the limitation in the ablation set-up where the incident laser is shielded by the bubbles rising upward.”
§ Green nanoparticle synthesis at scale: a perspective on overcoming the limits of pulsed laser ablation in liquids for highthroughput production > 4.6. Knowing the effect of target morphology
What the sources say
- Supportedcites [100] 100. S. Kohsakowski, B. Go ¨kce, R. Tanabe, P. Wagener, A. Plech, Y. Ito and S. Barcikowski, Target geometry and rigidity determines laser-induced cavitation bubble transport and nanoparticle productivity-a high-speed videography study, Phys. Chem. Chem. Phys., 2016, 18(24), 16585-16593, DOI: 10.1039/c6cp01232a. 101 source
The Results & discussion passage states that wire-tip and two-side-clamped wire ablation had the same productivity. It explains that the springboard-like motion did not increase productivity because bubbles and nanoparticles moved upward toward the incident laser beam, where they could shield subsequent pulses. (LLM, conf=0.94)
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Supported
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“Ablation at the tip of the wire results in a 23% shorter bubble lifetime compared to the ablation in a bulk target, due to the springboard movement, which allows a larger displacement of the bubble, as shown in Fig. 11b.”
§ Green nanoparticle synthesis at scale: a perspective on overcoming the limits of pulsed laser ablation in liquids for highthroughput production > 4.6. Knowing the effect of target morphology
What the sources say
- Partly supportedcites Kohsakowski et al. (2016) sourceExperimental — accuracy not yet measured
The Results & discussion section reports that the bubble lifetime at the wire tip is 23% shorter than at the bulk target, and separately describes springboard-driven bubble displacement. It attributes the bulk-target bubble’s longer lifetime to its greater expansion, not to the absence of springboard movement; the claimed causal link is therefore unsupported. (LLM, conf=0.87)
- Partly supportedcites [100] 100. S. Kohsakowski, B. Go ¨kce, R. Tanabe, P. Wagener, A. Plech, Y. Ito and S. Barcikowski, Target geometry and rigidity determines laser-induced cavitation bubble transport and nanoparticle productivity-a high-speed videography study, Phys. Chem. Chem. Phys., 2016, 18(24), 16585-16593, DOI: 10.1039/c6cp01232a. 101 sourceExperimental — accuracy not yet measured
The Results & discussion section reports that the bubble lifetime at the wire tip is 23% shorter than at the bulk target and that springboard-like wire movement allows greater bubble displacement. It does not attribute the shorter lifetime to that movement; instead, it links the bulk-target bubble’s longer lifetime to its greater expansion. Page numbers are unavailable in our copy. (LLM, conf=0.86)
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Partly supported
122 more claims · 3 with their cited sources checked
Create a free account to see all 257 claims and to verify the 29 references still open.
- Probably not a substantial claim. 68
- It may state two separate claims as one. 83
- The quote only partly states this claim. 1
Citations
Cites
Synthesis and surface engineering of iron oxide nanoparticles for biomedical applications
Gupta, A. K., & Gupta, M. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2004.10.012 · Cited by 6,771
Applications of magnetic nanoparticles in biomedicine
Pankhurst, Q. A., Connolly, J., Jones, S. K., & Dobson, J. (2003) · Journal of Physics D: Applied Physics · doi:10.1088/0022-3727/36/13/201 · Cited by 5,881
Co3O4 nanocrystals on graphene as a synergistic catalyst for oxygen reduction reaction
Liang, Y., Li, Y., Wang, H., Zhou, J., Wang, J., Regier, T., & Dai, H. (2011) · Nature Materials · doi:10.1038/nmat3087 · Cited by 5,494
Green Chemistry: Principles and Practice
Anastas, P., & Eghbali, N. (2010) · Chem. Soc. Rev. · doi:10.1039/b918763b · Cited by 5,256
MoS 2 Nanoparticles Grown on Graphene: An Advanced Catalyst for the Hydrogen Evolution Reaction
Li, Y., Wang, H., Xie, L., Liang, Y., Hong, G., & Dai, H. (2011) · Journal of the American Chemical Society · doi:10.1021/ja201269b · Cited by 5,001
Review on Zinc Oxide Nanoparticles: Antibacterial Activity and Toxicity Mechanism
Sirelkhatim, A., Mahmud, S., Seeni, A., Kaus, N. H. M., Ann, L. C., Bakhori, S. K. M., Hasan, H., & Mohamad, D. (2015) · Nano-Micro Letters · doi:10.1007/s40820-015-0040-x · Cited by 4,586
Ultra-large-scale syntheses of monodisperse nanocrystals
Park, J., An, K., Hwang, Y., Park, J.-G., Noh, H.-J., Kim, J.-Y., Park, J.-H., Hwang, N.-M., & Hyeon, T. (2004) · Nature Materials · doi:10.1038/nmat1251 · Cited by 4,076
Determination of Size and Concentration of Gold Nanoparticles from UV−Vis Spectra
Haiss, W., Thanh, N. T. K., Aveyard, J., & Fernig, D. G. (2007) · Analytical Chemistry · doi:10.1021/ac0702084 · Cited by 3,677
Nanomaterials: a review of synthesis methods, properties, recent progress, and challenges
Baig, N., Kammakakam, I., & Falath, W. (2021) · Materials Advances · doi:10.1039/d0ma00807a · Cited by 3,262
Femtosecond, picosecond and nanosecond laser ablation of solids
Chichkov, B. N., Momma, C., Nolte, S., Alvensleben, F., & Tünnermann, A. (1996) · Applied Physics A Materials Science & Processing · doi:10.1007/bf01567637 · Cited by 3,066
Antibacterial properties of nanoparticles
Hajipour, M. J., Fromm, K. M., Akbar Ashkarran, A., Jimenez de Aberasturi, D., Larramendi, I. R. D., Rojo, T., Serpooshan, V., Parak, W. J., & Mahmoudi, M. (2012) · Trends in Biotechnology · doi:10.1016/j.tibtech.2012.06.004 · Cited by 2,710
Xiang, Q., Yu, J., & Jaroniec, M. (2012) · Journal of the American Chemical Society · doi:10.1021/ja302846n · Cited by 2,360
Gold Nanoparticles for Biology and Medicine
Giljohann, D. A., Seferos, D. S., Daniel, W. L., Massich, M. D., Patel, P. C., & Mirkin, C. A. (2010) · Angewandte Chemie International Edition · doi:10.1002/anie.200904359 · Cited by 2,356
Henglein, A. (1993) · The Journal of Physical Chemistry · doi:10.1021/j100123a004 · Cited by 1,726
Ultrafast lasers—reliable tools for advanced materials processing
Sugioka, K., & Cheng, Y. (2014) · Light: Science & Applications · doi:10.1038/lsa.2014.30 · Cited by 1,545
Extinction coefficient of gold nanoparticles with different sizes and different capping ligands
Liu, X., Atwater, M., Wang, J., & Huo, Q. (2007) · Colloids and Surfaces B: Biointerfaces · doi:10.1016/j.colsurfb.2006.08.005 · Cited by 1,379
Laser Synthesis and Processing of Colloids: Fundamentals and Applications
Zhang, D., Gökce, B., & Barcikowski, S. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.6b00468 · Cited by 1,344
Self-citationAblation of metals by ultrashort laser pulses
Nolte, S., Momma, C., Jacobs, H., Tünnermann, A., Chichkov, B. N., Wellegehausen, B., & Welling, H. (1997) · Journal of the Optical Society of America B · doi:10.1364/josab.14.002716 · Cited by 1,146
Aggregation and Sedimentation of Aqueous Nanoscale Zerovalent Iron Dispersions
Phenrat, T., Saleh, N., Sirk, K., Tilton, R. D., & Lowry, G. V. (2007) · Environmental Science & Technology · doi:10.1021/es061349a · Cited by 1,084
Nanomaterials via Laser Ablation/Irradiation in Liquid: A Review
Zeng, H., Du, X., Singh, S. C., Kulinich, S. A., Yang, S., He, J., & Cai, W. (2012) · Advanced Functional Materials · doi:10.1002/adfm.201102295 · Cited by 966
Formation of Gold Nanoparticles by Laser Ablation in Aqueous Solution of Surfactant
Mafuné, Kohno, J.-Y., Takeda, Y., Kondow, T., & Sawabe, H. (2001) · The Journal of Physical Chemistry B · doi:10.1021/jp0037091 · Cited by 630
The Lycurgus Cup — A Roman nanotechnology
Freestone, I., Meeks, N., Sax, M., & Higgitt, C. (2007) · Gold Bulletin · doi:10.1007/bf03215599 · Cited by 588
Choi, H., Ko, S.-J., Choi, Y., Joo, P., Kim, T., Lee, B. R., Jung, J.-W., Choi, H. J., Cha, M., Jeong, J.-R., et al. (2013) · Nature Photonics · doi:10.1038/nphoton.2013.181 · Cited by 530
Tsuji, T., Iryo, K., Watanabe, N., & Tsuji, M. (2002) · Applied Surface Science · doi:10.1016/s0169-4332(02)00936-4 · Cited by 490
Jain, A., Duvvuri, L. S., Farah, S., Beyth, N., Domb, A. J., & Khan, W. (2014) · Advanced Healthcare Materials · doi:10.1002/adhm.201400418 · Cited by 485
Pulsed laser ablation and deposition of thin films
Ashfold, M. N. R., Claeyssens, F., Fuge, G. M., & Henley, S. J. (2004) · Chemical Society Reviews · doi:10.1039/b207644f · Cited by 473
Sub-picosecond UV laser ablation of metals
Preuss, S., Demchuk, A., & Stuke, M. (1995) · Applied Physics A Materials Science & Processing · doi:10.1007/bf01538207 · Cited by 468
Theerthagiri, J., Karuppasamy, K., Lee, S. J., Shwetharani, R., Kim, H.-S., Pasha, S. K. K., Ashokkumar, M., & Choi, M. Y. (2022) · Light: Science & Applications · doi:10.1038/s41377-022-00904-7 · Cited by 461
Zhigilei, L. V., & Garrison, B. J. (2000) · Journal of Applied Physics · doi:10.1063/1.373816 · Cited by 425
Syafiuddin, A., Salmiati, Salim, M. R., Beng Hong Kueh, A., Hadibarata, T., & Nur, H. (2017) · Journal of the Chinese Chemical Society · doi:10.1002/jccs.201700067 · Cited by 415
Amendola, V., Amans, D., Ishikawa, Y., Koshizaki, N., Scirè, S., Compagnini, G., Reichenberger, S., & Barcikowski, S. (2020) · Chemistry – A European Journal · doi:10.1002/chem.202000686 · Cited by 354
Nanoparticles Engineering by Pulsed Laser Ablation in Liquids: Concepts and Applications
Fazio, E., Gökce, B., De Giacomo, A., Meneghetti, M., Compagnini, G., Tommasini, M., Waag, F., Lucotti, A., Zanchi, C. G., Ossi, P. M., et al. (2020) · Nanomaterials · doi:10.3390/nano10112317 · Cited by 346
Self-citationVogel, A., Linz, N., Freidank, S., & Paltauf, G. (2008) · Physical Review Letters · doi:10.1103/physrevlett.100.038102 · Cited by 322
Femtosecond laser reshaping yields gold nanorods with ultranarrow surface plasmon resonances
González-Rubio, G., Díaz-Núñez, P., Rivera, A., Prada, A., Tardajos, G., González-Izquierdo, J., Bañares, L., Llombart, P., Macdowell, L. G., Alcolea Palafox, M., et al. (2017) · Science · doi:10.1126/science.aan8478 · Cited by 300
Streubel, R., Barcikowski, S., & Gökce, B. (2016) · Optics Letters · doi:10.1364/ol.41.001486 · Cited by 283
Self-citationNaik Shreyanka, S., Theerthagiri, J., Lee, S. J., Yu, Y., & Choi, M. Y. (2022) · Chemical Engineering Journal · doi:10.1016/j.cej.2022.137045 · Cited by 278
Kinetically-controlled laser-synthesis of colloidal high-entropy alloy nanoparticles
Waag, F., Li, Y., Ziefuß, A. R., Bertin, E., Kamp, M., Duppel, V., Marzun, G., Kienle, L., Barcikowski, S., & Gökce, B. (2019) · RSC Advances · doi:10.1039/c9ra03254a · Cited by 273
Self-citationMechanisms and processes of pulsed laser ablation in liquids during nanoparticle production
DellʼAglio, M., Gaudiuso, R., De Pascale, O., & De Giacomo, A. (2015) · Applied Surface Science · doi:10.1016/j.apsusc.2015.01.082 · Cited by 270
Triplet fusion upconversion nanocapsules for volumetric 3D printing
Sanders, S. N., Schloemer, T. H., Gangishetty, M. K., Anderson, D., Seitz, M., Gallegos, A. O., Stokes, R. C., & Congreve, D. N. (2022) · Nature · doi:10.1038/s41586-022-04485-8 · Cited by 269
Preparation of silver nanoparticles by laser ablation in polyvinylpyrrolidone solutions
Tsuji, T., Thang, D.-H., Okazaki, Y., Nakanishi, M., Tsuboi, Y., & Tsuji, M. (2008) · Applied Surface Science · doi:10.1016/j.apsusc.2008.02.048 · Cited by 262
Pulsed Laser in Liquids Made Nanomaterials for Catalysis
Forsythe, R. C., Cox, C. P., Wilsey, M. K., & Müller, A. M. (2021) · Chemical Reviews · doi:10.1021/acs.chemrev.0c01069 · Cited by 259
Encoding complex fields by using a phase-only optical element
Mendoza-Yero, O., Mínguez-Vega, G., & Lancis, J. (2014) · Optics Letters · doi:10.1364/ol.39.001740 · Cited by 254
Self-citationShih, C.-Y., Streubel, R., Heberle, J., Letzel, A., Shugaev, M. V., Wu, C., Schmidt, M., Gökce, B., Barcikowski, S., & Zhigilei, L. V. (2018) · Nanoscale · doi:10.1039/c7nr08614h · Cited by 253
Self-citationRecent advances in nanoplasmonic biosensors: applications and lab-on-a-chip integration
Lopez, G. A., Estevez, M.-C., Soler, M., & Lechuga, L. M. (2017) · Nanophotonics · doi:10.1515/nanoph-2016-0101 · Cited by 250
Gram Scale Synthesis of Pure Ceramic Nanoparticles by Laser Ablation in Liquid
Sajti, C. L., Sattari, R., Chichkov, B. N., & Barcikowski, S. (2010) · The Journal of Physical Chemistry C · doi:10.1021/jp906960g · Cited by 242
Hendel, T., Wuithschick, M., Kettemann, F., Birnbaum, A., Rademann, K., & Polte, J. (2014) · Analytical Chemistry · doi:10.1021/ac502053s · Cited by 235
Generation of nanoparticle colloids by picosecond and femtosecond laser ablations in liquid flow
Barcikowski, S., Menéndez-Manjón, A., Chichkov, B., Brikas, M., & Račiukaitis, G. (2007) · Applied Physics Letters · doi:10.1063/1.2773937 · Cited by 225
Femtosecond and picosecond laser drilling of metals at high repetition rates and average powers
Ancona, A., Döring, S., Jauregui, C., Röser, F., Limpert, J., Nolte, S., & Tünnermann, A. (2009) · Optics Letters · doi:10.1364/ol.34.003304 · Cited by 222
Electro-optic and Acousto-optic Laser Beam Scanners
Römer, G. R. B. E., & Bechtold, P. (2014) · Physics Procedia · doi:10.1016/j.phpro.2014.08.092 · Cited by 216
Pulse width and energy influence on laser micromachining of metals in a range of 100fs to 5ps
Le Harzic, R., Breitling, D., Weikert, M., Sommer, S., Föhl, C., Valette, S., Donnet, C., Audouard, E., & Dausinger, F. (2005) · Applied Surface Science · doi:10.1016/j.apsusc.2004.12.027 · Cited by 212
Pulsed-laser–induced reactive quenching at liquid-solid interface: Aqueous oxidation of iron
Patil, P. P., Phase, D. M., Kulkarni, S. A., Ghaisas, S. V., Kulkarni, S. K., Kanetkar, S. M., Ogale, S. B., & Bhide, V. G. (1987) · Physical Review Letters · doi:10.1103/physrevlett.58.238 · Cited by 211
Kanitz, A., Kalus, M.-R., Gurevich, E. L., Ostendorf, A., Barcikowski, S., & Amans, D. (2019) · Plasma Sources Science and Technology · doi:10.1088/1361-6595/ab3dbe · Cited by 195
Laser ablation of solid substrates in water and ambient air
Zhu, S., Lu, Y. F., Hong, M. H., & Chen, X. Y. (2001) · Journal of Applied Physics · doi:10.1063/1.1342200 · Cited by 193
Raciukaitis, G. (2009) · Journal of Laser Micro/Nanoengineering · doi:10.2961/jlmn.2009.03.0008 · Cited by 183
De Giacomo, A., Dell'Aglio, M., Santagata, A., Gaudiuso, R., De Pascale, O., Wagener, P., Messina, G. C., Compagnini, G., & Barcikowski, S. (2013) · Phys. Chem. Chem. Phys. · doi:10.1039/c2cp42649h · Cited by 181
On Nanoparticle Formation by Laser Ablation in Liquids
Itina, T. E. (2011) · The Journal of Physical Chemistry C · doi:10.1021/jp1090944 · Cited by 179
Theoretical fundamentals of short pulse laser–metal interaction: A review
Li, X., & Guan, Y. (2020) · Nanotechnology and Precision Engineering · doi:10.1016/j.npe.2020.08.001 · Cited by 176
Dynamical study of bubble expansion following laser ablation in liquids
Lam, J., Lombard, J., Dujardin, C., Ledoux, G., Merabia, S., & Amans, D. (2016) · Applied Physics Letters · doi:10.1063/1.4942389 · Cited by 174
Tsuji, T., Iryo, K., Nishimura, Y., & Tsuji, M. (2001) · Journal of Photochemistry and Photobiology A: Chemistry · doi:10.1016/s1010-6030(01)00583-4 · Cited by 173
A hierarchical view on material formation during pulsed-laser synthesis of nanoparticles in liquid
Ibrahimkutty, S., Wagener, P., Rolo, T. D. S., Karpov, D., Menzel, A., Baumbach, T., Barcikowski, S., & Plech, A. (2015) · Scientific Reports · doi:10.1038/srep16313 · Cited by 171
Shih, C.-Y., Wu, C., Shugaev, M. V., & Zhigilei, L. V. (2016) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2016.10.029 · Cited by 164
Pilot-scale synthesis of metal nanoparticles by high-speed pulsed laser ablation in liquids
Streubel, R., Bendt, G., & Gökce, B. (2016) · Nanotechnology · doi:10.1088/0957-4484/27/20/205602 · Cited by 150
Self-citationYogesh, G. K., Shukla, S., Sastikumar, D., & Koinkar, P. (2021) · Applied Physics A · doi:10.1007/s00339-021-04951-6 · Cited by 148
Doñate-Buendia, C., Torres-Mendieta, R., Pyatenko, A., Falomir, E., Fernández-Alonso, M., & Mínguez-Vega, G. (2018) · ACS Omega · doi:10.1021/acsomega.7b02082 · Cited by 145
Self-citationLaser ablation in liquids for nanomaterial synthesis: diversities of targets and liquids
Zhang, D., Li, Z., & Sugioka, K. (2021) · Journal of Physics: Photonics · doi:10.1088/2515-7647/ac0bfd · Cited by 144
Naik, S. S., Theerthagiri, J., Nogueira, F., Lee, S. J., Min, A., Kim, G., Maia, G., Pinto, L. M. C., & Choi, M. Y. (2023) · ACS Catalysis · doi:10.1021/acscatal.2c05017 · Cited by 142
Wang, Z., Xiao, B., Lin, Z., Shen, S., Xu, A., Du, Z., Chen, Y., & Zhong, W. (2021) · Journal of Energy Chemistry · doi:10.1016/j.jechem.2020.06.042 · Cited by 141
Reversible Nanodiamond-Carbon Onion Phase Transformations
Xiao, J., Ouyang, G., Liu, P., Wang, C. X., & Yang, G. W. (2014) · Nano Letters · doi:10.1021/nl5014234 · Cited by 137
Shih, C.-Y., Shugaev, M. V., Wu, C., & Zhigilei, L. V. (2020) · Physical Chemistry Chemical Physics · doi:10.1039/d0cp00608d · Cited by 136
Pulsed Laser Ablation of Zinc in Tetrahydrofuran: Bypassing the Cavitation Bubble
Wagener, P., Schwenke, A., Chichkov, B. N., & Barcikowski, S. (2010) · The Journal of Physical Chemistry C · doi:10.1021/jp911243a · Cited by 133
Yeap, S. P., Lim, J., Ooi, B. S., & Ahmad, A. L. (2017) · Journal of Nanoparticle Research · doi:10.1007/s11051-017-4065-6 · Cited by 133
The role of continuum radiation in laser induced plasma spectroscopy
Giacomo, A. D., Gaudiuso, R., Dell’Aglio, M., & Santagata, A. (2010) · Spectrochimica Acta Part B Atomic Spectroscopy · doi:10.1016/j.sab.2010.03.016 · Cited by 131
Jendrzej, S., Gökce, B., Epple, M., & Barcikowski, S. (2017) · ChemPhysChem · doi:10.1002/cphc.201601139 · Cited by 129
Self-citationNecklace‐like Noble‐Metal Hollow Nanoparticle Chains: Synthesis and Tunable Optical Properties
Zeng, J., Huang, J., Lu, W. D., Wang, X., Wang, B., Zhang, S.-C., & Hou, J. (2007) · Advanced Materials · doi:10.1002/adma.200602440 · Cited by 128
Torres-Mendieta, R., Ventura-Espinosa, D., Sabater, S., Lancis, J., Mínguez-Vega, G., & Mata, J. A. (2016) · Scientific Reports · doi:10.1038/srep30478 · Cited by 120
Self-citationOptimization of the volume ablation rate for metals at different laser pulse-durations from ps to fs
Neuenschwander, B., Jaeggi, B., Schmid, M., Rouffiange, V., & Martin, P.-E. (2012) · SPIE Proceedings · doi:10.1117/12.908583 · Cited by 119
Sasaki, K., & Takada, N. (2010) · Pure and Applied Chemistry · doi:10.1351/pac-con-09-10-23 · Cited by 111
Kalus, M.-R., Bärsch, N., Streubel, R., Gökce, E., Barcikowski, S., & Gökce, B. (2017) · Physical Chemistry Chemical Physics · doi:10.1039/c6cp07011f · Cited by 109
Self-citationTheerthagiri, J., Karuppasamy, K., Min, A., Govindarajan, D., Kumari, M. L. A., Govarthanan, M., Kheawhom, S., Kim, H., & Choi, M. Y. (2022) · Applied Physics Reviews · doi:10.1063/5.0104740 · Cited by 106
Pulsed laser ablation in liquids: Impact of the bubble dynamics on particle formation
Reich, S., Schönfeld, P., Wagener, P., Letzel, A., Ibrahimkutty, S., Gökce, B., Barcikowski, S., Menzel, A., dos Santos Rolo, T., & Plech, A. (2017) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2016.08.030 · Cited by 103
Self-citationMechanisms of nanoparticle formation by ultra-short laser ablation of metals in liquid environment
Povarnitsyn, M. E., Itina, T. E., Levashov, P. R., & Khishchenko, K. V. (2013) · Physical Chemistry Chemical Physics · doi:10.1039/c2cp42650a · Cited by 103
Kim, T., Kang, S., Heo, J., Cho, S., Kim, J. W., Choe, A., Walker, B., Shanker, R., Ko, H., & Kim, J. Y. (2018) · Advanced Materials · doi:10.1002/adma.201800659 · Cited by 102
Intartaglia, R., Bagga, K., & Brandi, F. (2014) · Optics Express · doi:10.1364/oe.22.003117 · Cited by 99
Menéndez-Manjón, A., Wagener, P., & Barcikowski, S. (2011) · The Journal of Physical Chemistry C · doi:10.1021/jp109370q · Cited by 97
Tanabe, R., Nguyen, T. T. P., Sugiura, T., & Ito, Y. (2015) · Applied Surface Science · doi:10.1016/j.apsusc.2015.05.030 · Cited by 91
Synthesis of nanoparticles in laser ablation of aluminum in liquid
Kumar, B., & Thareja, R. K. (2010) · Journal of Applied Physics · doi:10.1063/1.3486517 · Cited by 86
Tymoczko, A., Kamp, M., Rehbock, C., Kienle, L., Cattaruzza, E., Barcikowski, S., & Amendola, V. (2019) · Nanoscale Horizons · doi:10.1039/c9nh00332k · Cited by 83
Comparative Study of Polymeric Stabilizers for Magnetite Nanoparticles Using ATRP
Golas, P. L., Louie, S. M., Lowry, G. V., Matyjaszewski, K. A., & Tilton, R. D. (2010) · Langmuir · doi:10.1021/la103098q · Cited by 80
Polygon Scanner System for Ultra Short Pulsed Laser Micro-Machining Applications
De Loor, R. (2013) · Physics Procedia · doi:10.1016/j.phpro.2013.03.114 · Cited by 77
Dependence of gold nanoparticle production on pulse duration by laser ablation in liquid media
Riabinina, D., Chaker, M., & Margot, J. (2012) · Nanotechnology · doi:10.1088/0957-4484/23/13/135603 · Cited by 77
Dittrich, S., Barcikowski, S., & Gökce, B. (2021) · Opto-Electronic Advances · doi:10.29026/oea.2021.200072 · Cited by 69
Self-citationMessina, G. C., Wagener, P., Streubel, R., De Giacomo, A., Santagata, A., Compagnini, G., & Barcikowski, S. (2013) · Phys. Chem. Chem. Phys. · doi:10.1039/c2cp42626a · Cited by 68
Marzun, G., Levish, A., Mackert, V., Kallio, T., Barcikowski, S., & Wagener, P. (2017) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2016.09.014 · Cited by 68
Jendrzej, S., Gökce, B., Amendola, V., & Barcikowski, S. (2015) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2015.10.032 · Cited by 67
Self-citationWaag, F., Streubel, R., Gökce, B., & Barcikowski, S. (2021) · Applied Nanoscience · doi:10.1007/s13204-021-01693-y · Cited by 67
Self-citationKatyal, J., & Soni, R. K. (2013) · Journal of Modern Optics · doi:10.1080/09500340.2013.856483 · Cited by 66
Crivellaro, S., Guadagnini, A., Arboleda, D. M., Schinca, D., & Amendola, V. (2019) · Review of Scientific Instruments · doi:10.1063/1.5083811 · Cited by 63
Determining the role of redox-active materials during laser-induced water decomposition
Kalus, M.-R., Lanyumba, R., Lorenzo-Parodi, N., Jochmann, M. A., Kerpen, K., Hagemann, U., Schmidt, T. C., Barcikowski, S., & Gökce, B. (2019) · Physical Chemistry Chemical Physics · doi:10.1039/c9cp02663k · Cited by 62
Self-citationKohsakowski, S., Santagata, A., Dell’Aglio, M., de Giacomo, A., Barcikowski, S., Wagener, P., & Gökce, B. (2017) · Applied Surface Science · doi:10.1016/j.apsusc.2017.01.077 · Cited by 62
Self-citationLaser ablation of silicon in water under different flow rates
Charee, W., Tangwarodomnukun, V., & Dumkum, C. (2015) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-014-6625-6 · Cited by 62
Cuadra, J. G., Molina-Prados, S., Mínguez-Vega, G., Estrada, A. C., Trindade, T., Oliveira, C. S., Seabra, M. P. D. S., Labrincha, J. A., Porcar, S., Bareño, R. C., et al. (2023) · Applied Surface Science · doi:10.1016/j.apsusc.2023.156519 · Cited by 61
Self-citationEarly dynamics of cavitation bubbles generated during ns laser ablation of submerged targets
Long, J., Eliceiri, M., Vangelatos, Z., Rho, Y., Wang, L., Su, Z., Xie, X., Zhang, Y., & Grigoropoulos, C. P. (2020) · Optics Express · doi:10.1364/oe.391584 · Cited by 59
Kudryashov, S. I., Samokhvalov, A. A., Nastulyavichus, A. A., Saraeva, I. N., Mikhailovskii, V. Y., Ionin, A. A., & Veiko, V. P. (2019) · Materials · doi:10.3390/ma12040562 · Cited by 57
Wang, Y., Zhang, H., Zhu, Y., Dai, Z., Bao, H., Wei, Y. M., & Cai, W. (2016) · Advanced Materials Interfaces · doi:10.1002/admi.201500801 · Cited by 56
Hamad, A. H., Li, L., & Liu, Z. (2015) · Applied Physics A · doi:10.1007/s00339-015-9326-6 · Cited by 55
Dittrich, S., Streubel, R., McDonnell, C., Huber, H. P., Barcikowski, S., & Gökce, B. (2019) · Applied Physics A · doi:10.1007/s00339-019-2704-8 · Cited by 53
Self-citationSaraeva, I. N., Kudryashov, S. I., Rudenko, A. A., Zhilnikova, M. I., Ivanov, D. S., Zayarny, D. A., Simakin, A. V., Ionin, A. A., & Garcia, M. E. (2019) · Applied Surface Science · doi:10.1016/j.apsusc.2018.11.199 · Cited by 51
Collinear double pulse laser ablation in water for the production of silver nanoparticles
Dell'Aglio, M., Gaudiuso, R., ElRashedy, R., De Pascale, O., Palazzo, G., & De Giacomo, A. (2013) · Physical Chemistry Chemical Physics · doi:10.1039/c3cp54194k · Cited by 51
High spatiotemporal resolution in multifocal processing with femtosecond laser pulses
Mínguez-Vega, G., Lancis, J., Caraquitena, J., Torres-Company, V., & Andrés, P. (2006) · Optics Letters · doi:10.1364/ol.31.002631 · Cited by 48
Self-citationA Review on Laser-Assisted Joining of Aluminium Alloys to Other Metals
Bunaziv, I., Akselsen, O. M., Ren, X., Nyhus, B., Eriksson, M., & Gulbrandsen-Dahl, S. (2021) · Metals · doi:10.3390/met11111680 · Cited by 48
Kohsakowski, S., Gökce, B., Tanabe, R., Wagener, P., Plech, A., Ito, Y., & Barcikowski, S. (2016) · Physical Chemistry Chemical Physics · doi:10.1039/c6cp01232a · Cited by 48
Self-citationJohny, J., Kamp, M., Prymak, O., Tymoczko, A., Wiedwald, U., Rehbock, C., Schürmann, U., Popescu, R., Gerthsen, D., Kienle, L., et al. (2021) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.1c02138 · Cited by 47
Pérez‐Tanoira, R., Fernández‐Arias, M., Potel, C., Carballo, R., Pérez‐Castro, S., Boutinguiza, M., Górgolas, M., Lusquiños, F., & Pou, J. (2022) · International Journal of Molecular Sciences · doi:10.3390/ijms231912027 · Cited by 46
Synthesis and Shape Manipulation of Anisotropic Gold Nanoparticles by Laser Ablation in Solution
Piotto, V., Litti, L., & Meneghetti, M. (2020) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.9b10793 · Cited by 45
Promoting the yield of nanoparticles from laser ablation in liquid
Jiang, Y., Liu, P., Liang, Y., Li, H. B., & Yang, G. W. (2011) · Applied Physics A · doi:10.1007/s00339-011-6557-z · Cited by 45
Cao, J., Yang, Q., Miao, Y., Li, Y., Qiu, S., Zhu, Z., Wang, P., & Chen, Z. (2022) · Light Science & Applications · doi:10.1038/s41377-022-00795-8 · Cited by 44
Letzel, A., Santoro, M., Frohleiks, J., Ziefuß, A. R., Reich, S., Plech, A., Fazio, E., Neri, F., Barcikowski, S., & Gökce, B. (2019) · Applied Surface Science · doi:10.1016/j.apsusc.2018.12.025 · Cited by 44
Self-citationOne-step synthesis of Zn/ZnO hollow nanoparticles by the laser ablation in liquid technique
Desarkar, H. S., Kumbhakar, P., & Mitra, A. K. (2013) · Laser Physics Letters · doi:10.1088/1612-2011/10/5/055903 · Cited by 44
Doñate-Buendía, C., Fernández-Alonso, M., Lancis, J., & Mínguez-Vega, G. (2019) · Photonics Research · doi:10.1364/prj.7.001249 · Cited by 43
Self-citationHupfeld, T., Wegner, A., Blanke, M., Doñate‐Buendía, C., Sharov, V., Nieskens, S., Piechotta, M., Giese, M., Barcikowski, S., & Gökce, B. (2020) · Advanced Optical Materials · doi:10.1002/adom.202000473 · Cited by 42
Self-citationNazemi, M., Panikkanvalappil, S. R., Liao, C.-K., Mahmoud, M. A., & El-Sayed, M. A. (2021) · ACS Nano · doi:10.1021/acsnano.1c02347 · Cited by 41
Discrimination of effects leading to gas formation during pulsed laser ablation in liquids
Kalus, M.-R., Reimer, V., Barcikowski, S., & Gökce, B. (2019) · Applied Surface Science · doi:10.1016/j.apsusc.2018.09.224 · Cited by 41
Self-citationLaser-ablated volume and depth as a function of pulse duration in aluminum targets
Le Drogoff, B., Vidal, F., Laville, S., Chaker, M., Johnston, T., Barthélemy, O., Margot, J., & Sabsabi, M. (2005) · Applied Optics · doi:10.1364/ao.44.000278 · Cited by 40
LaHaye, N. L., Harilal, S. S., Diwakar, P. K., & Hassanein, A. (2013) · Journal of Analytical Atomic Spectrometry · doi:10.1039/c3ja50200g · Cited by 40
Laser ablation in air and its application in catalytic water splitting and Li-ion battery
Lin, Z., Shen, S., Wang, Z., & Zhong, W. (2021) · iScience · doi:10.1016/j.isci.2021.102469 · Cited by 40
Smirnov, N. A., Kudryashov, S. I., Rudenko, A. A., Zayarny, D. A., & Ionin, A. A. (2021) · Applied Surface Science · doi:10.1016/j.apsusc.2021.150243 · Cited by 40
Zhang, K., Ivanov, D. S., Ganeev, R. A., Boltaev, G. S., Krishnendu, P. S., Singh, S. C., Garcia, M. E., Zavestovskaya, I. N., & Guo, C. (2019) · Nanomaterials · doi:10.3390/nano9050767 · Cited by 39
Long, J., Eliceiri, M. H., Wang, L., Vangelatos, Z., Ouyang, Y., Xie, X., Zhang, Y., & Grigoropoulos, C. P. (2020) · Optics & Laser Technology · doi:10.1016/j.optlastec.2020.106647 · Cited by 39
Dell'Aglio, M., Santagata, A., Valenza, G., De Stradis, A., & De Giacomo, A. (2017) · ChemPhysChem · doi:10.1002/cphc.201601231 · Cited by 37
Opportunities and Challenges for Laser Synthesis of Colloids
Gökce, B., Amendola, V., & Barcikowski, S. (2017) · ChemPhysChem · doi:10.1002/cphc.201700310 · Cited by 37
Self-citationDoping nanoparticles using pulsed laser ablation in a liquid containing the doping agent
Chemin, A., Lam, J., Laurens, G., Trichard, F., Motto-Ros, V., Ledoux, G., Jarý, V., Laguta, V., Nikl, M., Dujardin, C., et al. (2019) · Nanoscale Advances · doi:10.1039/c9na00223e · Cited by 36
Nguyen, T. T. P., Tanabe-Yamagishi, R., & Ito, Y. (2019) · Optics and Lasers in Engineering · doi:10.1016/j.optlaseng.2019.105937 · Cited by 35
Bechtold, P., Hohenstein, R., & Schmidt, M. (2013) · Optics Letters · doi:10.1364/ol.38.002934 · Cited by 35
Dell’Aglio, M., Motto-Ros, V., Pelascini, F., Gornushkin, I. B., & De Giacomo, A. (2019) · Plasma Sources Science and Technology · doi:10.1088/1361-6595/ab369b · Cited by 35
Synthesis of hollow rare-earth compound nanoparticles by a universal sacrificial template method
Jia, Y., Sun, T., Wang, J., Huang, H., Li, P., Yu, X., & Chu, P. K.-H. (2014) · CrystEngComm · doi:10.1039/c4ce00440j · Cited by 33
Alheshibri, M., Akhtar, S., Baroot, A. F. A., Elsayed, K. A., Qahtani, H. S. A., & Drmosh, Q. A. (2021) · Arabian Journal of Chemistry · doi:10.1016/j.arabjc.2021.103317 · Cited by 32
Laser ablated copper plasmas in liquid and gas ambient
Kumar, B., & Thareja, R. K. (2013) · Physics of Plasmas · doi:10.1063/1.4807041 · Cited by 32
Shabalina, A. V., Svetlichnyi, V. A., & Kulinich, S. A. (2022) · Current Opinion in Green and Sustainable Chemistry · doi:10.1016/j.cogsc.2021.100566 · Cited by 32
Schmitz, T., Wiedwald, U., Dubs, C., & Gökce, B. (2017) · ChemPhysChem · doi:10.1002/cphc.201601183 · Cited by 32
Self-citationCharacterization of Tin/Ethylene Glycol Solar Nanofluids Synthesized by Femtosecond Laser Radiation
Torres‐Mendieta, R., Mondragón, R., Puerto‐Belda, V., Mendoza‐Yero, O., Lancis, J., Juliá, J. E., & Mínguez‐Vega, G. (2017) · ChemPhysChem · doi:10.1002/cphc.201601083 · Cited by 31
Self-citation(2022) · doi:10.1007/s40964-022-00319-1 · Cited by 31
Self-citationDiagnostics of liquid-phase laser ablation plasmas by spectroscopic methods
Ushida, H., Takada, N., & Sasaki, K. (2007) · Journal of Physics: Conference Series · doi:10.1088/1742-6596/59/1/120 · Cited by 27
Femtosecond versus picosecond laser ablation (Keynote Address)
Ostendorf, A., Kamlage, G., Klug, U., Korte, F., & Chichkov, B. N. (2005) · SPIE Proceedings · doi:10.1117/12.597975 · Cited by 27
Synthesis and multiferroic properties of high-purity CoFe2O4–BiFeO3 nanocomposites
(2021) · doi:10.1016/j.jallcom.2021.159008 · Cited by 26
Self-citationKhairani, I. Y., Lin, Q., Landers, J., Salamon, S., Doñate‐Buendía, C., Karapetrova, E., Wende, H., Zangari, G., & Gökce, B. (2023) · Nanomaterials · doi:10.3390/nano13020227 · Cited by 26
Self-citationKudryashov, S. I., Nastulyavichus, A. A., Ivanova, A. K., Smirnov, N. A., Khmelnitskiy, R. A., Rudenko, A. A., Saraeva, I. N., Tolordava, E. R., Yu. Kharin, A., Zavestovskaya, I. N., et al. (2019) · Applied Surface Science · doi:10.1016/j.apsusc.2018.11.201 · Cited by 26
Kalus, M., Lanyumba, R., Barcikowski, S., & Gökce, B. (2021) · Journal of Flow Chemistry · doi:10.1007/s41981-021-00144-7 · Cited by 26
Self-citationOn the selection and design of powder materials for laser additive manufacturing
(2021) · doi:10.1016/j.matdes.2021.109653 · Cited by 23
Self-citationMulti-dimensional Additive Manufacturing
(2020) · doi:10.1007/978-981-15-7910-3 · Cited by 23
Wirtz, S. F., Cunha, A. P. A., Labusch, M., Marzun, G., Barcikowski, S., & Söffker, D. (2018) · Sensors · doi:10.3390/s18061775 · Cited by 21
Franz, D., Häfner, T., Kunz, T., et al. (2022) · Applied Physics B · doi:10.1007/s00340-022-07782-2 · Cited by 21
A simple strategy for enhanced production of nanoparticles by laser ablation in liquids
Monsa, Y., Gal, G., Lerner, N., & Bar, I. (2020) · Nanotechnology · doi:10.1088/1361-6528/ab78ac · Cited by 21
Pereira, P. F. S., de Paula e Silva, A. C. A., da Silva Pimentel, B. N. A., Pinatti, I. M., Simões, A. Z., Vergani, C. E., Barreto-Vieira, D. F., da Silva, M. A. N., Miranda, M. D., Monteiro, M. E. S., et al. (2022) · Scientific Reports · doi:10.1038/s41598-022-11902-5 · Cited by 20
Self-citationResano-Garcia, A., Champmartin, S., Battie, Y., Koch, A., En Naciri, A., Ambari, A., & Chaoui, N. (2016) · Physical Chemistry Chemical Physics · doi:10.1039/c6cp06511b · Cited by 20
Schille, J., Schneider, L., Streek, A., Kloetzer, S., & Loeschner, U. (2016) · SPIE Proceedings · doi:10.1117/12.2220112 · Cited by 20
Plasma generated during underwater pulsed laser processing
Hoffman, J., Chrzanowska-Giżyńska, J., Mościcki, T., Radziejewska, J., Stobiński, L., & Szymanski, Z. (2017) · Applied Surface Science · doi:10.1016/j.apsusc.2017.01.185 · Cited by 19
Ablation target cooling by maximizing the nanoparticle productivity in laser synthesis of colloids
Waag, F., Gökce, B., & Barcikowski, S. (2019) · Applied Surface Science · doi:10.1016/j.apsusc.2018.10.030 · Cited by 19
Self-citationLahoz, R., Naghilou, A., Kautek, W., & Miguel, Ó. (2020) · Applied Surface Science · doi:10.1016/j.apsusc.2020.145438 · Cited by 18
Nadarajah, R., Barcikowski, S., & Gökce, B. (2020) · Optics Express · doi:10.1364/oe.28.002909 · Cited by 18
Self-citationScaling of optical forces on Au–PEG core–shell nanoparticles
Spadaro, D., Iatì, M. A., Donato, M. G., Gucciardi, P. G., Saija, R., Cherlakola, A. R., Scaramuzza, S., Amendola, V., & Maragò, O. M. (2015) · RSC Advances · doi:10.1039/c5ra20922f · Cited by 17
Doñate-Buendia, C., Spellauge, M., Streubel, R., Riahi, F., Barcikowski, S., Huber, H. P., & Gökce, B. (2023) · Journal of Physics D: Applied Physics · doi:10.1088/1361-6463/acbaaa · Cited by 16
Self-citationFreeland, B., McCann, R., Alkan, G., Friedrich, B., Foley, G., & Brabazon, D. (2020) · Advances in Materials and Processing Technologies · doi:10.1080/2374068x.2020.1740877 · Cited by 16
Curcio, M., Bonis, A. D., Santagata, A., Galasso, A., & Teghil, R. (2021) · Optics & Laser Technology · doi:10.1016/j.optlastec.2021.106916 · Cited by 16
Handbook of Laser Synthesis & Processing of Colloids
Barcikowski, S., Amendola, V., Lau, M., Marzun, G., Rehbock, C., Reichenberger, S., Zhang, D., & Gökce, B. (2019) · DuEPublico: Duisburg-Essen Publications online, University of Duisburg-Essen, Germany · doi:10.17185/duepublico/70584 · Cited by 15
Self-citationLi, X., Zhang, G., Jiang, L., Shi, X., Zhang, K., Rong, W., Duan, J., & Lu, Y. (2015) · Optics Express · doi:10.1364/oe.23.004226 · Cited by 14
Labusch, M., Cunha, A. P. A., Wirtz, S. F., Reichenberger, S., Cleve, E., Söffker, D., & Barcikowski, S. (2019) · Applied Surface Science · doi:10.1016/j.apsusc.2019.02.080 · Cited by 13
Nastulyavichus, A., Smirnov, N., & Kudryashov, S. (2022) · Chinese Physics B · doi:10.1088/1674-1056/ac5602 · Cited by 12
Laser ablation of a solid target in liquid medium for beryllium nanoparticles synthesis
Yehia-Alexe, S. A., Carpen, L. G., Stokker-Cheregi, F., Poroşnicu, C., Sătulu, V., Staicu, C., Butoi, B., Lungu, I. I., Virot, F., Grisolia, C., et al. (2022) · Nuclear Materials and Energy · doi:10.1016/j.nme.2022.101160 · Cited by 11
Nandini, P., Akash, K., Rohit, G., Vipul, S., & Palani, I. A. (2017) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-017-2886-1 · Cited by 10
Ablation efficiency of gold at fs/ps laser treatment in water and air
Smirnov, N., Kudryashov, S. I., Rudenko, A. A., Nastulyavichus, A., & Ионин, А. А. (2022) · Laser Physics Letters · doi:10.1088/1612-202x/ac46ab · Cited by 10
(2020) · doi:10.4283/jmag.2020.25.2.140 · Cited by 9
Self-citationNastulyavichus, A., Kudryashov, S. I., Ионин, А. А., & Gonchukov, S. A. (2022) · Laser Physics Letters · doi:10.1088/1612-202x/ac581a · Cited by 7
Han, C., Wang, R., Pan, A., Wang, W., Huang, H., Zhang, J., & Niu, C. (2019) · Optics & Laser Technology · doi:10.1016/j.optlastec.2018.07.058 · Cited by 7
Nakano, T. (2021) · Multi-dimensional Additive Manufacturing · doi:10.1007/978-981-15-7910-3_1 · Cited by 7
Normal dispersion effects on the nonlinear focus
Ma, C., & Lin, W. (2016) · Journal of the Optical Society of America B · doi:10.1364/josab.33.001055 · Cited by 6
Amendola, V., Amans, D., Ishikawa, Y., et al. (2020) · Chemistry - A European Journal · doi:10.1002/chem.202084268 · Cited by 4
Kudryashov, S., Danilov, P., Schneider, L., Schille, J., Loeschner, U., Nastulyavichus, A., Smirnov, N., Kuchmizhak, A., & Vitrik, O. (2021) · Laser Physics Letters · doi:10.1088/1612-202x/abd171 · Cited by 3
The Effect of Alkaline Ratios of NaOH to NH3 on the Formation of Nanostructured Titania
(2017) · doi:10.4028/www.scientific.net/msf.886.42 · Cited by 2
Self-citationHochskalierung der laserbasierten Nanopartikelsynthese für die heterogene Katalyse
Kohsakowski, S. (2019) · DuEPublico: Duisburg-Essen Publications Online, University of Duisburg-Essen, Germany · doi:10.17185/duepublico/47810
Pulser Laser Ablation and Deposition of Thin Films.
Ashfold, M. N. R., Claeyssens, F., Fuge, G. M., et al. (2004) · ChemInform · doi:10.1002/chin.200416215
Laser-Induced Plasma and its Applications
Chaudhary, K., Rizvi, S. Z. H., & Ali, J. (2016) · Plasma Science and Technology - Progress in Physical States and Chemical Reactions · doi:10.5772/61784
Research works printed but not linked: 4
- Fojtik, 1993, Berichte der Bunsen-Gesellschaft, 97, 252
- Amendola, 2020, Chem. – Eur. J., 26, 9206, 10.1002/chem.202000686 · DOI · Paper page
- Tunnermann, 2010, Pulse, 49, 34
- D.-I. J.Berkmanns and D.-I. M.Faerber , Laser basics - LASERLINE Technical. , 2008
Cited by
Rethinking Nanoparticle Synthesis: A Sustainable Approach vs. Traditional Methods
Jain, K., Takuli, A., Gupta, T. K., & Gupta, D. (2024) · Chemistry - An Asian Journal · doi:10.1002/asia.202400701 · Cited by 182
Manshina, A., Tumkin, I. I., Khairullina, E. M., Mizoshiri, M., Ostendorf, A., Kulinich, S. A., Makarov, S., Kuchmizhak, A. A., & Gurevich, E. L. (2024) · Advanced Functional Materials · doi:10.1002/adfm.202405457 · Cited by 125
Martínez-Chávez, L. A., Hernández-Ramírez, M. Y., Feregrino-Pérez, A., & Escalante, K. E. (2024) · Agronomy · doi:10.3390/agronomy14122822 · Cited by 52
Rajkumar, M., Presley, S. I. D., Thiyagarajulu, N., Girigoswami, K., Janani, G., Kamaraj, C., Madheswaran, B., Prajapati, B. G., Ali, N., & Khan, M. R. (2025) · Scientific Reports · doi:10.1038/s41598-024-84098-5 · Cited by 47
Ahmed, M. R., Manik, K. H., Islam, M. S., Rhine, A., Mim, J. J., & Hossain, N. (2026) · Next Materials · doi:10.1016/j.nxmate.2026.101929 · Cited by 62
Metadata
- Authors
- Khairani, I. Y., Mínguez-Vega, G., Doñate-Buendía, C., & Gökce, B.
- Affiliations
- University of Wuppertal (DE)
- GROC-UJI, Institut de Noves Tecnologies de la Imatge (INIT), Universitat Jaume I, 12071, Castellón, Spain
- Chair of Materials Science and Additive Manufacturing, School of Mechanical Engineering and Safety Engineering, University of Wuppertal, 42119 Wuppertal, Germany
- Corresponding author
- Gökce, Bilal
- Venue
- Physical Chemistry Chemical Physics
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2023
- Volume
- 25
- Issue
- 29
- Pages
- 19380-19408
- ISSN
- 1463-9076 (ISSN-L)
- 1463-9084
- OpenAlex
- W4383426422
- Cited by
- 130
- References
- 181
- Citations by year
- 2026: 44 · 2025: 53 · 2024: 28 · 2023: 5
- FWCI
- 2.91
- Type
- journal article
- Language
- en
- Open access
- hybrid
- doi.org
- Licence
- Locations
- Physical Chemistry Chemical Physics (publishedVersion, cc-by-nc)
- PubMed (publishedVersion)
- Repositori UJI (Universitat Jaume I) (submittedVersion, cc-by-nc)
- Funders
- Deutsche Forschungsgemeinschaft (GO 2566/10-1, GO 2566/14-1)
- European Commission (952068)
- Topics
- Physical Sciences › Materials Science › Materials Chemistry › Laser-Ablation Synthesis of Nanoparticles
- Physical Sciences › Physics and Astronomy › Acoustics and Ultrasonics › Ultrasound and Cavitation Phenomena
- Physical Sciences › Materials Science › Electronic, Optical and Magnetic Materials › Gold and Silver Nanoparticles Synthesis and Applications
- Keywords
- pulsed laser ablation in liquid, green synthesis of nanoparticles, ligand-free nanoparticles, laser parameters, target materials, nanoparticle size and shape control
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
The claim verdicts this report counts are experimental: their accuracy is not yet measured.
A language model drew the claims from the paper on 2026-10-10, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).
A second model labelled each claim on 2026-10-10 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).
Cited sources are checked with a language model’s help (qwen3.8-omni-flash and gpt-6-sol).
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.