The DOI matches its Crossref record; 182 of the 182 references it cites were found in a registry or an index.
Hydrogel-based 3D bioprinting: A comprehensive review on cell-laden hydrogels, bioink formulations, and future perspectives
Open accessAbstract
Hydrogel plays a vital role in cell-laden three dimensional (3D) bioprinting, whereas those hydrogels mimic the physical and biochemical characteristics of native extracellular matrix (ECM). The complex microenvironment of the ECM does not replicate from the traditional static microenvironment of the hydrogel, but the evolution of the 3D bioprinting facilitates to accommodate the dynamic modulation and spatial heterogeneity of the hydrogel system. Selection of hydrogel for 3D bioprinting depends on the printing techniques including microextrusion, inkjet, laser-assisted printing, and stereolithography. In this review, we specifically cover the 3D printable hydrogels where cells can be encapsulated without significant reduction in the cell viability. The recent research highlights of the most widely used hydrogel materials are elucidated in terms of stability of the hydrogel system, cross-linking method, support cell types and their post-printing cell viability. Also, the techniques used to improve the mechanical and biological properties of the hydrogels, such as adding various organic and inorganic materials and making microchannels, are discussed. Furthermore, the recent advances in vascularized tissue construct and scaffold-free bioprinting as a promising method for vascularization are covered in this review. The recent trends in four-dimensional (4D) bioprinting as a stimuli-responsive formation of new organs, and 3D bioprinting based organ-on-chip systems are also discussed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Matrix elasticity directs stem cell lineage specification
Engler, A. J., Sen, S., Sweeney, H. L., & Discher, D. E. (2006) · Cell · doi:10.1016/j.cell.2006.06.044 · Cited by 13,915
3D bioprinting of tissues and organs
Murphy, S. V., & Atala, A. (2014) · Nature Biotechnology · doi:10.1038/nbt.2958 · Cited by 7,034
Tissue Cells Feel and Respond to the Stiffness of Their Substrate
Discher, D. E., Janmey, P., & Wang, Y.-L. (2005) · Science · doi:10.1126/science.1116995 · Cited by 6,382
Hydrogels for biomedical applications
Hoffman, A. S. (2002) · Advanced Drug Delivery Reviews · doi:10.1016/s0169-409x(01)00239-3 · Cited by 4,864
Fabrication of novel biomaterials through molecular self-assembly
Zhang, S. (2003) · Nature Biotechnology · doi:10.1038/nbt874 · Cited by 3,347
Sydney Gladman, A., Matsumoto, E. A., Nuzzo, R. G., Mahadevan, L., & Lewis, J. A. (2016) · Nature Materials · doi:10.1038/nmat4544 · Cited by 3,027
Advances in engineering hydrogels
Zhang, Y. S., & Khademhosseini, A. (2017) · Science · doi:10.1126/science.aaf3627 · Cited by 2,908
On the mechanisms of biocompatibility
Williams, D. F. (2008) · Biomaterials · doi:10.1016/j.biomaterials.2008.04.023 · Cited by 2,772
A 3D bioprinting system to produce human-scale tissue constructs with structural integrity
Kang, H.-W., Lee, S. J., Ko, I. K., Kengla, C., Yoo, J. J., & Atala, A. (2016) · Nature Biotechnology · doi:10.1038/nbt.3413 · Cited by 2,622
Cell-laden microengineered gelatin methacrylate hydrogels
Nichol, J. W., Koshy, S. T., Bae, H., Hwang, C. M., Yamanlar, S., & Khademhosseini, A. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.03.064 · Cited by 2,377 · cited 1×
“The compressive modulus of the GelMA depends on the methacrylation degree and the concentration of the GelMA, where the compressive modulus of GelMA with higher methacrylation degree was reported in the range of 5–30 kPa from lower concentration to higher concentration respectively [128].”
BackgroundAlginate hydrogels as synthetic extracellular matrix materials
Rowley, J. A., Madlambayan, G., & Mooney, D. J. (1999) · Biomaterials · doi:10.1016/s0142-9612(98)00107-0 · Cited by 2,342
Vascularized and functional human liver from an iPSC-derived organ bud transplant
Takebe, T., Sekine, K., Enomura, M., Koike, H., Kimura, M., Ogaeri, T., Zhang, R.-R., Ueno, Y., Zheng, Y.-W., Koike, N., et al. (2013) · Nature · doi:10.1038/nature12271 · Cited by 2,170
Novel crosslinking methods to design hydrogels
Hennink, W. E., & van Nostrum, C. F. (2002) · Advanced Drug Delivery Reviews · doi:10.1016/s0169-409x(01)00240-x · Cited by 1,962
Designing Cell-Compatible Hydrogels for Biomedical Applications
Seliktar, D. (2012) · Science · doi:10.1126/science.1214804 · Cited by 1,923
3D bioprinting for engineering complex tissues
Mandrycky, C., Wang, Z., Kim, K., & Kim, D.-H. (2016) · Biotechnology Advances · doi:10.1016/j.biotechadv.2015.12.011 · Cited by 1,754
Photopolymerizable hydrogels for tissue engineering applications
Nguyen, K. T., & West, J. L. (2002) · Biomaterials · doi:10.1016/s0142-9612(02)00175-8 · Cited by 1,669
Current advances and future perspectives in extrusion-based bioprinting
Ozbolat, I. T., & Hospodiuk, M. (2016) · Biomaterials · doi:10.1016/j.biomaterials.2015.10.076 · Cited by 1,572
Microscale technologies for tissue engineering and biology
Khademhosseini, A., Langer, R., Borenstein, J., & Vacanti, J. P. (2006) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.0507681102 · Cited by 1,558
Structural and Rheological Properties of Methacrylamide Modified Gelatin Hydrogels
Van Den Bulcke, A. I., Bogdanov, B., De Rooze, N., Schacht, E. H., Cornelissen, M., & Berghmans, H. (2000) · Biomacromolecules · doi:10.1021/bm990017d · Cited by 1,536
Markstedt, K., Mantas, A., Tournier, I., Martínez Ávila, H., Hägg, D., & Gatenholm, P. (2015) · Biomacromolecules · doi:10.1021/acs.biomac.5b00188 · Cited by 1,528
Three-dimensional bioprinting of thick vascularized tissues
Kolesky, D. B., Homan, K. A., Skylar-Scott, M. A., & Lewis, J. A. (2016) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1521342113 · Cited by 1,492
Kuo, C. K., & Ma, P. X. (2001) · Biomaterials · doi:10.1016/s0142-9612(00)00201-5 · Cited by 1,491
Bioactive modification of poly (ethylene glycol) hydrogels for tissue engineering
Zhu, J. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.02.044 · Cited by 1,457
Hutmacher, D. W. (2001) · Journal of Biomaterials Science, Polymer Edition · doi:10.1163/156856201744489 · Cited by 1,409
Nanotechnological strategies for engineering complex tissues
Dvir, T., Timko, B. P., Kohane, D. S., & Langer, R. (2011) · Nature Nanotechnology · doi:10.1038/nnano.2010.246 · Cited by 1,367
Thermoresponsive hydrogels in biomedical applications
Klouda, L., & Mikos, A. G. (2008) · European Journal of Pharmaceutics and Biopharmaceutics · doi:10.1016/j.ejpb.2007.02.025 · Cited by 1,349
Scaffold-free vascular tissue engineering using bioprinting
Norotte, C., Marga, F. S., Niklason, L. E., & Forgacs, G. (2009) · Biomaterials · doi:10.1016/j.biomaterials.2009.06.034 · Cited by 1,339
Collagen-Based Biomaterials for Tissue Engineering Applications
Parenteau-Bareil, R., Gauvin, R., & Berthod, F. (2010) · Materials · doi:10.3390/ma3031863 · Cited by 1,256
Thermoresponsive Polymers for Biomedical Applications
Ward, M. A., & Georgiou, T. K. (2011) · Polymers · doi:10.3390/polym3031215 · Cited by 1,158
Nelson, C. M., & Bissell, M. J. (2006) · Annual Review of Cell and Developmental Biology · doi:10.1146/annurev.cellbio.22.010305.104315 · Cited by 1,130
Molecular Basis of Ca2+-Induced Gelation in Alginates and Pectins: The Egg-Box Model Revisited
Braccini, I., & Pérez, S. (2001) · Biomacromolecules · doi:10.1021/bm010008g · Cited by 1,125
The bioink: A comprehensive review on bioprintable materials
Hospodiuk, M., Dey, M., Sosnoski, D., & Ozbolat, I. T. (2017) · Biotechnology Advances · doi:10.1016/j.biotechadv.2016.12.006 · Cited by 1,118
Vascularization is the key challenge in tissue engineering
Novosel, E. C., Kleinhans, C., & Kluger, P. J. (2011) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2011.03.004 · Cited by 1,062
3D bioprinting for biomedical devices and tissue engineering: A review of recent trends and advances
Derakhshanfar, S., Mbeleck, R., Xu, K., Zhang, X., Zhong, W., & Xing, M. (2018) · Bioactive Materials · doi:10.1016/j.bioactmat.2017.11.008 · Cited by 1,027
Billiet, T., Gevaert, E., De Schryver, T., Cornelissen, M., & Dubruel, P. (2014) · Biomaterials · doi:10.1016/j.biomaterials.2013.09.078 · Cited by 1,015 · cited 2×
“4(e) and (f)), and the maintained expression of liver-specific functions was observed [132].”
BackgroundMethod3D Bioprinting of heterogeneous aortic valve conduits with alginate/gelatin hydrogels
Duan, B., Hockaday, L. A., Kang, K. H., & Butcher, J. T. (2013) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.34420 · Cited by 1,002
Bioprinting 3D microfibrous scaffolds for engineering endothelialized myocardium and heart-on-a-chip
Zhang, Y. S., Arneri, A., Bersini, S., Shin, S.-R., Zhu, K., Goli-Malekabadi, Z., Aleman, J., Colosi, C., Busignani, F., Dell'Erba, V., et al. (2016) · Biomaterials · doi:10.1016/j.biomaterials.2016.09.003 · Cited by 951
Hydrogel bioprinted microchannel networks for vascularization of tissue engineering constructs
Bertassoni, L. E., Cecconi, M., Manoharan, V., Nikkhah, M., Hjortnaes, J., Cristino, A. L., Barabaschi, G., Demarchi, D., Dokmeci, M. R., Yang, Y., et al. (2014) · Lab Chip · doi:10.1039/c4lc00030g · Cited by 944
Direct 3D bioprinting of perfusable vascular constructs using a blend bioink
Jia, W., Gungor-Ozkerim, P. S., Zhang, Y. S., Yue, K., Zhu, K., Liu, W., Pi, Q., Byambaa, B., Dokmeci, M. R., Shin, S. R., et al. (2016) · Biomaterials · doi:10.1016/j.biomaterials.2016.07.038 · Cited by 922
3D printing of smart materials: A review on recent progresses in 4D printing
Khoo, Z. X., Teoh, J. E. M., Liu, Y., Chua, C. K., Yang, S., An, J., Leong, K. F., & Yeong, W. Y. (2015) · Virtual and Physical Prototyping · doi:10.1080/17452759.2015.1097054 · Cited by 912
Deterministically patterned biomimetic human iPSC-derived hepatic model via rapid 3D bioprinting
Ma, X., Qu, X., Zhu, W., Li, Y.-S., Yuan, S., Zhang, H., Liu, J., Wang, P., Lai, C. S. E., Zanella, F., et al. (2016) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1524510113 · Cited by 872
Instrumented cardiac microphysiological devices via multimaterial three-dimensional printing
Lind, J. U., Busbee, T. A., Valentine, A. D., Pasqualini, F. S., Yuan, H., Yadid, M., Park, S.-J., Kotikian, A., Nesmith, A. P., Campbell, P. H., et al. (2017) · Nature Materials · doi:10.1038/nmat4782 · Cited by 863
Microfluidic Bioprinting of Heterogeneous 3D Tissue Constructs Using Low‐Viscosity Bioink
Colosi, C., Shin, S. R., Manoharan, V., Massa, S., Costantini, M., Barbetta, A., Dokmeci, M. R., Dentini, M., & Khademhosseini, A. (2016) · Advanced Materials · doi:10.1002/adma.201503310 · Cited by 863
Multimaterial magnetically assisted 3D printing of composite materials
Kokkinis, D., Schaffner, M., & Studart, A. R. (2015) · Nature Communications · doi:10.1038/ncomms9643 · Cited by 848
Sequential click reactions for synthesizing and patterning three-dimensional cell microenvironments
DeForest, C. A., Polizzotti, B. D., & Anseth, K. S. (2009) · Nature Materials · doi:10.1038/nmat2473 · Cited by 847
Gelatin-Methacryloyl Hydrogels: Towards Biofabrication-Based Tissue Repair
Klotz, B. J., Gawlitta, D., Rosenberg, A. J. W. P., Malda, J., & Melchels, F. P. W. (2016) · Trends in Biotechnology · doi:10.1016/j.tibtech.2016.01.002 · Cited by 846
Xing, R., Liu, K., Jiao, T., Zhang, N., Ma, K., Zhang, R., Zou, Q., Ma, G., & Yan, X. (2016) · Advanced Materials · doi:10.1002/adma.201600284 · Cited by 800
Scaffolds and cells for tissue regeneration: different scaffold pore sizes—different cell effects
Bružauskaitė, I., Bironaitė, D., Bagdonas, E., & Bernotienė, E. (2016) · Cytotechnology · doi:10.1007/s10616-015-9895-4 · Cited by 797
Schuurman, W., Levett, P. A., Pot, M. W., van Weeren, P. R., Dhert, W. J. A., Hutmacher, D. W., Melchels, F. P. W., Klein, T. J., & Malda, J. (2013) · Macromolecular Bioscience · doi:10.1002/mabi.201200471 · Cited by 790
Functional Human Vascular Network Generated in Photocrosslinkable Gelatin Methacrylate Hydrogels
Chen, Y., Lin, R., Qi, H., Yang, Y., Bae, H., Melero‐Martin, J. M., & Khademhosseini, A. (2012) · Advanced Functional Materials · doi:10.1002/adfm.201101662 · Cited by 779
Reinforcement of hydrogels using three-dimensionally printed microfibres
Visser, J., Melchels, F. P. W., Jeon, J. E., van Bussel, E. M., Kimpton, L. S., Byrne, H. M., Dhert, W. J. A., Dalton, P. D., Hutmacher, D. W., & Malda, J. (2015) · Nature Communications · doi:10.1038/ncomms7933 · Cited by 718
Designing degradable hydrogels for orthogonal control of cell microenvironments
Kharkar, P. M., Kiick, K. L., & Kloxin, A. M. (2013) · Chem. Soc. Rev. · doi:10.1039/c3cs60040h · Cited by 717
4D Bioprinting for Biomedical Applications
Gao, B., Yang, Q., Zhao, X., Jin, G., Ma, Y., & Xu, F. (2016) · Trends in Biotechnology · doi:10.1016/j.tibtech.2016.03.004 · Cited by 711
DeForest, C. A., & Anseth, K. S. (2011) · Nature Chemistry · doi:10.1038/nchem.1174 · Cited by 708
Bioprinting of 3D convoluted renal proximal tubules on perfusable chips
Homan, K. A., Kolesky, D. B., Skylar-Scott, M. A., Herrmann, J., Obuobi, H., Moisan, A., & Lewis, J. A. (2016) · Scientific Reports · doi:10.1038/srep34845 · Cited by 699
3D Bioprinting for Tissue and Organ Fabrication
Zhang, Y. S., Yue, K., Aleman, J., Mollazadeh-Moghaddam, K., Bakht, S. M., Yang, J., Jia, W., Dell’Erba, V., Assawes, P., Shin, S. R., et al. (2017) · Annals of Biomedical Engineering · doi:10.1007/s10439-016-1612-8 · Cited by 682
Chitosan-based scaffolds for bone tissue engineering
Levengood, S. K. L., & Zhang, M. (2014) · Journal of Materials Chemistry B · doi:10.1039/c4tb00027g · Cited by 672
Degradation of Partially Oxidized Alginate and Its Potential Application for Tissue Engineering
Bouhadir, K. H., Lee, K. Y., Alsberg, E., Damm, K. L., Anderson, K. W., & Mooney, D. J. (2001) · Biotechnology Progress · doi:10.1021/bp010070p · Cited by 672
Applications of Alginate-Based Bioinks in 3D Bioprinting
Axpe, E., & Oyen, M. (2016) · International Journal of Molecular Sciences · doi:10.3390/ijms17121976 · Cited by 663
Bioprinted Amniotic Fluid-Derived Stem Cells Accelerate Healing of Large Skin Wounds
Skardal, A., Mack, D., Kapetanovic, E., Atala, A., Jackson, J. D., Yoo, J., & Soker, S. (2012) · Stem Cells Translational Medicine · doi:10.5966/sctm.2012-0088 · Cited by 660
Direct-write bioprinting of cell-laden methacrylated gelatin hydrogels
Bertassoni, L. E., Cardoso, J. C., Manoharan, V., Cristino, A. L., Bhise, N. S., Araujo, W. A., Zorlutuna, P., Vrana, N. E., Ghaemmaghami, A. M., Dokmeci, M. R., et al. (2014) · Biofabrication · doi:10.1088/1758-5082/6/2/024105 · Cited by 642
Wang, Z., Abdulla, R., Parker, B., Samanipour, R., Ghosh, S., & Kim, K. (2015) · Biofabrication · doi:10.1088/1758-5090/7/4/045009 · Cited by 633 · cited 1×
“A eosin Y based photoinitiator, 2',4',5',7'-tetrabromflurescein disodium salt, was used to make covalent bonds in a hydrogel mixture of GelMA and PEGDA through a visible light (514 nm) radiation, where 85% of NIH 3T3 cell viability was observed up to 5 days [144].”
MethodCoaxial nozzle-assisted 3D bioprinting with built-in microchannels for nutrients delivery
Gao, Q., He, Y., Fu, J.-Z., Liu, A., & Ma, L. (2015) · Biomaterials · doi:10.1016/j.biomaterials.2015.05.031 · Cited by 630
Michael, S., Sorg, H., Peck, C.-T., Koch, L., Deiwick, A., Chichkov, B., Vogt, P. M., & Reimers, K. (2013) · PLoS ONE · doi:10.1371/journal.pone.0057741 · Cited by 623
Woodfield, T. B. F., Malda, J., de Wijn, J., Péters, F., Riesle, J., & van Blitterswijk, C. A. (2004) · Biomaterials · doi:10.1016/j.biomaterials.2003.10.056 · Cited by 618
A liver-on-a-chip platform with bioprinted hepatic spheroids
Bhise, N. S., Manoharan, V., Massa, S., Tamayol, A., Ghaderi, M., Miscuglio, M., Lang, Q., Shrike Zhang, Y., Shin, S. R., Calzone, G., et al. (2016) · Biofabrication · doi:10.1088/1758-5090/8/1/014101 · Cited by 615
3D Printing of Shear-Thinning Hyaluronic Acid Hydrogels with Secondary Cross-Linking
Ouyang, L., Highley, C. B., Rodell, C. B., Sun, W., & Burdick, J. A. (2016) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.6b00158 · Cited by 607
Natural polymers for the microencapsulation of cells
Gasperini, L., Mano, J. F., & Reis, R. L. (2014) · Journal of The Royal Society Interface · doi:10.1098/rsif.2014.0817 · Cited by 602
Poly(ethylene glycol)-containing hydrogels in drug delivery
Peppas, N. A., Keys, K. B., Torres-Lugo, M., & Lowman, A. M. (1999) · Journal of Controlled Release · doi:10.1016/s0168-3659(99)00027-9 · Cited by 598
Yin, J., Yan, M., Wang, Y., Fu, J., & Suo, H. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b16059 · Cited by 598
Directed assembly of cell-laden microgels for fabrication of 3D tissue constructs
Du, Y., Lo, E., Ali, S., & Khademhosseini, A. (2008) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.0801866105 · Cited by 591
Hydrogels for Biomedical Applications
HOFFMAN, A. S. (2001) · Annals of the New York Academy of Sciences · doi:10.1111/j.1749-6632.2001.tb03823.x · Cited by 579
A Multimaterial Bioink Method for 3D Printing Tunable, Cell‐Compatible Hydrogels
Rutz, A. L., Hyland, K. E., Jakus, A. E., Burghardt, W. R., & Shah, R. N. (2015) · Advanced Materials · doi:10.1002/adma.201405076 · Cited by 572
Self-assembled hydrogels utilizing polymer–nanoparticle interactions
Appel, E. A., Tibbitt, M. W., Webber, M. J., Mattix, B. A., Veiseh, O., & Langer, R. (2015) · Nature Communications · doi:10.1038/ncomms7295 · Cited by 570
Shear-thinning and self-healing hydrogels as injectable therapeutics and for 3D-printing
Loebel, C., Rodell, C. B., Chen, M. H., & Burdick, J. A. (2017) · Nature Protocols · doi:10.1038/nprot.2017.053 · Cited by 565
Moving from static to dynamic complexity in hydrogel design
Burdick, J. A., & Murphy, W. L. (2012) · Nature Communications · doi:10.1038/ncomms2271 · Cited by 561
Kundu, J., Shim, J.-H., Jang, J., Kim, S.-W., & Cho, D.-W. (2015) · Journal of Tissue Engineering and Regenerative Medicine · doi:10.1002/term.1682 · Cited by 552
Engineering alginate as bioink for bioprinting
Jia, J., Richards, D. J., Pollard, S., Tan, Y., Rodriguez, J., Visconti, R. P., Trusk, T. C., Yost, M. J., Yao, H., Markwald, R. R., et al. (2014) · Acta Biomaterialia · doi:10.1016/j.actbio.2014.06.034 · Cited by 549
Mechanical properties and shape memory effect of 3D-printed PLA-based porous scaffolds
Senatov, F. S., Niaza, K. V., Zadorozhnyy, M. Y., Maksimkin, A. V., Kaloshkin, S. D., & Estrin, Y. Z. (2016) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2015.11.036 · Cited by 547
Yang, X., Lu, Z., Wu, H., Li, W., Zheng, L., & Zhao, J. (2018) · Materials Science and Engineering: C · doi:10.1016/j.msec.2017.09.002 · Cited by 533
Laronda, M. M., Rutz, A. L., Xiao, S., Whelan, K. A., Duncan, F. E., Roth, E. W., Woodruff, T. K., & Shah, R. N. (2017) · Nature Communications · doi:10.1038/ncomms15261 · Cited by 527
4D Printing with Mechanically Robust, Thermally Actuating Hydrogels
Bakarich, S. E., Gorkin, R., Panhuis, M. I. H., & Spinks, G. M. (2015) · Macromolecular Rapid Communications · doi:10.1002/marc.201500079 · Cited by 526
Extrusion Bioprinting of Shear‐Thinning Gelatin Methacryloyl Bioinks
Liu, W., Heinrich, M. A., Zhou, Y., Akpek, A., Hu, N., Liu, X., Guan, X., Zhong, Z., Jin, X., Khademhosseini, A., et al. (2017) · Advanced Healthcare Materials · doi:10.1002/adhm.201601451 · Cited by 503
Creating perfused functional vascular channels using 3D bio-printing technology
Lee, V. K., Kim, D. Y., Ngo, H., Lee, Y., Seo, L., Yoo, S.-S., Vincent, P. A., & Dai, G. (2014) · Biomaterials · doi:10.1016/j.biomaterials.2014.05.083 · Cited by 494
4D Biofabrication Using Shape‐Morphing Hydrogels
Kirillova, A., Maxson, R., Stoychev, G., Gomillion, C. T., & Ionov, L. (2017) · Advanced Materials · doi:10.1002/adma.201703443 · Cited by 494
Zustiak, S. P., & Leach, J. B. (2010) · Biomacromolecules · doi:10.1021/bm100137q · Cited by 493
High-resolution PLA-based composite scaffolds via 3-D printing technology
Serra, T., Planell, J. A., & Navarro, M. (2013) · Acta Biomaterialia · doi:10.1016/j.actbio.2012.10.041 · Cited by 479
High-throughput laser printing of cells and biomaterials for tissue engineering
Guillemot, F., Souquet, A., Catros, S., Guillotin, B., Lopez, J., Faucon, M., Pippenger, B., Bareille, R., Rémy, M., Bellance, S., et al. (2010) · Acta Biomaterialia · doi:10.1016/j.actbio.2009.09.029 · Cited by 475
Mondschein, R. J., Kanitkar, A., Williams, C. B., Verbridge, S. S., & Long, T. E. (2017) · Biomaterials · doi:10.1016/j.biomaterials.2017.06.005 · Cited by 475
3D Cell Culture in Alginate Hydrogels
Andersen, T., Auk-Emblem, P., & Dornish, M. (2015) · Microarrays · doi:10.3390/microarrays4020133 · Cited by 472
Skardal, A., Zhang, J., & Prestwich, G. D. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.04.045 · Cited by 461
Direct‐write bioprinting three‐dimensional biohybrid systems for future regenerative therapies
Chang, C. C., Boland, E. D., Williams, S. K., & Hoying, J. B. (2011) · Journal of Biomedical Materials Research Part B: Applied Biomaterials · doi:10.1002/jbm.b.31831 · Cited by 445
A photoreversible protein-patterning approach for guiding stem cell fate in three-dimensional gels
DeForest, C. A., & Tirrell, D. A. (2015) · Nature Materials · doi:10.1038/nmat4219 · Cited by 432 · cited 1×
“time due to an applied external stimuli, such as moisture [157], light [158], temperature [159], pH [160], magnetic field [161], or electric impulse [162], 4D printing is considered as printing of stimuli-responsive material, known as a smart material, that can be physically or chemically changed in response to extern…”
BackgroundSkardal, A., Devarasetty, M., Kang, H.-W., Mead, I., Bishop, C., Shupe, T., Lee, S. J., Jackson, J., Yoo, J., Soker, S., et al. (2015) · Acta Biomaterialia · doi:10.1016/j.actbio.2015.07.030 · Cited by 428
Cell patterning technologies for organotypic tissue fabrication
Guillotin, B., & Guillemot, F. (2011) · Trends in Biotechnology · doi:10.1016/j.tibtech.2010.12.008 · Cited by 428
Bioprinting Technology: A Current State-of-the-Art Review
Dababneh, A. B., & Ozbolat, I. T. (2014) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4028512 · Cited by 427
Stevens, K. R., Kreutziger, K. L., Dupras, S. K., Korte, F. S., Regnier, M., Muskheli, V., Nourse, M. B., Bendixen, K., Reinecke, H., & Murry, C. E. (2009) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.0908381106 · Cited by 427
Prestwich, G. D. (2011) · Journal of Controlled Release · doi:10.1016/j.jconrel.2011.04.007 · Cited by 413
Mechanical behaviour of alginate-gelatin hydrogels for 3D bioprinting
Giuseppe, M. D., Law, N., Webb, B., A. Macrae, R., Liew, L. J., Sercombe, T. B., Dilley, R. J., & Doyle, B. J. (2018) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2017.12.018 · Cited by 394
Three-dimensional bioprinting of complex cell laden alginate hydrogel structures
Tabriz, A. G., Hermida, M. A., Leslie, N. R., & Shu, W. (2015) · Biofabrication · doi:10.1088/1758-5090/7/4/045012 · Cited by 393
3D Bioprinting of Spatially Heterogeneous Collagen Constructs for Cartilage Tissue Engineering
Rhee, S., Puetzer, J. L., Mason, B. N., Reinhart-King, C. A., & Bonassar, L. J. (2016) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.6b00288 · Cited by 364
Freeman, F. E., & Kelly, D. J. (2017) · Scientific Reports · doi:10.1038/s41598-017-17286-1 · Cited by 362
Ornamenting 3D printed scaffolds with cell-laid extracellular matrix for bone tissue regeneration
Pati, F., Song, T.-H., Rijal, G., Jang, J., Kim, S. W., & Cho, D.-W. (2015) · Biomaterials · doi:10.1016/j.biomaterials.2014.10.012 · Cited by 361
Wüst, S., Godla, M. E., Müller, R., & Hofmann, S. (2014) · Acta Biomaterialia · doi:10.1016/j.actbio.2013.10.016 · Cited by 357
Scaffold‐free inkjet printing of three‐dimensional zigzag cellular tubes
Xu, C., Chai, W., Huang, Y., & Markwald, R. R. (2012) · Biotechnology and Bioengineering · doi:10.1002/bit.24591 · Cited by 357
Bioprinting technology and its applications
Seol, Y.-J., Kang, H.-W., Lee, S. J., Atala, A., & Yoo, J. J. (2014) · European Journal of Cardio-Thoracic Surgery · doi:10.1093/ejcts/ezu148 · Cited by 355
Gao, G., Schilling, A. F., Yonezawa, T., Wang, J., Dai, G., & Cui, X. (2014) · Biotechnology Journal · doi:10.1002/biot.201400305 · Cited by 351
Bioprinting scale-up tissue and organ constructs for transplantation
Ozbolat, I. T. (2015) · Trends in Biotechnology · doi:10.1016/j.tibtech.2015.04.005 · Cited by 350
Gao, G., Schilling, A. F., Hubbell, K., Yonezawa, T., Truong, D., Hong, Y., Dai, G., & Cui, X. (2015) · Biotechnology Letters · doi:10.1007/s10529-015-1921-2 · Cited by 341
Gao, G., Yonezawa, T., Hubbell, K., Dai, G., & Cui, X. (2015) · Biotechnology Journal · doi:10.1002/biot.201400635 · Cited by 340
Bendtsen, S. T., Quinnell, S. P., & Wei, M. (2017) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.36036 · Cited by 329
Poly(dopamine) coating of 3D printed poly(lactic acid) scaffolds for bone tissue engineering
Kao, C.-T., Lin, C.-C., Chen, Y.-W., Yeh, C.-H., Fang, H.-Y., & Shie, M.-Y. (2015) · Materials Science and Engineering: C · doi:10.1016/j.msec.2015.06.028 · Cited by 327
Gaetani, R., Feyen, D. A. M., Verhage, V., Slaats, R., Messina, E., Christman, K. L., Giacomello, A., Doevendans, P. A. F. M., & Sluijter, J. P. G. (2015) · Biomaterials · doi:10.1016/j.biomaterials.2015.05.005 · Cited by 307
Almeida, C. R., Serra, T., Oliveira, M. I., Planell, J. A., Barbosa, M. A., & Navarro, M. (2014) · Acta Biomaterialia · doi:10.1016/j.actbio.2013.10.035 · Cited by 290
Laser Printing of Stem Cells for Biofabrication of Scaffold-Free Autologous Grafts
Gruene, M., Deiwick, A., Koch, L., Schlie, S., Unger, C., Hofmann, N., Bernemann, I., Glasmacher, B., & Chichkov, B. (2011) · Tissue Engineering Part C: Methods · doi:10.1089/ten.tec.2010.0359 · Cited by 286
Park, S. A., Lee, S. H., & Kim, W. D. (2011) · Bioprocess and Biosystems Engineering · doi:10.1007/s00449-010-0499-2 · Cited by 284
Keriquel, V., Guillemot, F., Arnault, I., Guillotin, B., Miraux, S., Amédée, J., Fricain, J.-C., & Catros, S. (2010) · Biofabrication · doi:10.1088/1758-5082/2/1/014101 · Cited by 280
Bio‐Origami Hydrogel Scaffolds Composed of Photocrosslinked PEG Bilayers
Jamal, M., Kadam, S. S., Xiao, R., Jivan, F., Onn, T., Fernandes, R., Nguyen, T. D., & Gracias, D. H. (2013) · Advanced Healthcare Materials · doi:10.1002/adhm.201200458 · Cited by 270
Advances and Future Perspectives in 4D Bioprinting
Ashammakhi, N., Ahadian, S., Zengjie, F., Suthiwanich, K., Lorestani, F., Orive, G., Ostrovidov, S., & Khademhosseini, A. (2018) · Biotechnology Journal · doi:10.1002/biot.201800148 · Cited by 270
Yu, Y., Moncal, K. K., Li, J., Peng, W., Rivero, I., Martin, J. A., & Ozbolat, I. T. (2016) · Scientific Reports · doi:10.1038/srep28714 · Cited by 269
Dong, L., Wang, S.-J., Zhao, X.-R., Zhu, Y.-F., & Yu, J.-K. (2017) · Scientific Reports · doi:10.1038/s41598-017-13838-7 · Cited by 268
Yu, Y., Zhang, Y., Martin, J. A., & Ozbolat, I. T. (2013) · Journal of Biomechanical Engineering · doi:10.1115/1.4024575 · Cited by 267
Multiscale bioprinting of vascularized models
Miri, A. K., Khalilpour, A., Cecen, B., Maharjan, S., Shin, S. R., & Khademhosseini, A. (2019) · Biomaterials · doi:10.1016/j.biomaterials.2018.08.006 · Cited by 267
Clickable PEG hydrogel microspheres as building blocks for 3D bioprinting
Xin, S., Chimene, D., Garza, J. E., Gaharwar, A. K., & Alge, D. L. (2019) · Biomaterials Science · doi:10.1039/c8bm01286e · Cited by 263
Haug, A., Smidsrød, O., Larsen, B., Gronowitz, S., Hoffman, R. A., & Westerdahl, A. (1965) · Acta Chemica Scandinavica · doi:10.3891/acta.chem.scand.19-0341 · Cited by 254
Bioorthogonal Click Chemistry: An Indispensable Tool to Create Multifaceted Cell Culture Scaffolds
Azagarsamy, M. A., & Anseth, K. S. (2013) · ACS Macro Letters · doi:10.1021/mz300585q · Cited by 253
3D Bioprinting of Highly Thixotropic Alginate/Methylcellulose Hydrogel with Strong Interface Bonding
Li, H., Tan, Y. J., Leong, K. F., & Li, L. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b04216 · Cited by 250
Diamantides, N., Wang, L., Pruiksma, T., Siemiatkoski, J., Dugopolski, C., Shortkroff, S., Kennedy, S., & Bonassar, L. J. (2017) · Biofabrication · doi:10.1088/1758-5090/aa780f · Cited by 250
Daniele, M. A., Adams, A. A., Naciri, J., North, S. H., & Ligler, F. S. (2014) · Biomaterials · doi:10.1016/j.biomaterials.2013.11.009 · Cited by 249
Science in three dimensions: The print revolution
Jones, N. (2012) · Nature · doi:10.1038/487022a · Cited by 249
Characterization of printable cellular micro-fluidic channels for tissue engineering
Zhang, Y., Yu, Y., Chen, H., & Ozbolat, I. T. (2013) · Biofabrication · doi:10.1088/1758-5082/5/2/025004 · Cited by 246
Seyednejad, H., Gawlitta, D., Kuiper, R. V., de Bruin, A., van Nostrum, C. F., Vermonden, T., Dhert, W. J. A., & Hennink, W. E. (2012) · Biomaterials · doi:10.1016/j.biomaterials.2012.03.002 · Cited by 245
Advancing Frontiers in Bone Bioprinting
Ashammakhi, N., Hasan, A., Kaarela, O., Byambaa, B., Sheikhi, A., Gaharwar, A. K., & Khademhosseini, A. (2019) · Advanced Healthcare Materials · doi:10.1002/adhm.201801048 · Cited by 244
3D Bioprinting of Self‐Standing Silk‐Based Bioink
Zheng, Z., Wu, J., Liu, M., Wang, H., Li, C., Rodriguez, M. J., Li, G., Wang, X., & Kaplan, D. L. (2018) · Advanced Healthcare Materials · doi:10.1002/adhm.201701026 · Cited by 241
Hydrogels used for cell‐based drug delivery
Schmidt, J. J., Rowley, J., & Kong, H. J. (2008) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.32287 · Cited by 228
Gonçalves, E. M., Oliveira, F. J., Silva, R. F., Neto, M. A., Fernandes, M. H., Amaral, M., Vallet‐Regí, M., & Vila, M. (2016) · Journal of Biomedical Materials Research Part B: Applied Biomaterials · doi:10.1002/jbm.b.33432 · Cited by 221
Park, J. Y., Choi, J.-C., Shim, J.-H., Lee, J.-S., Park, H., Kim, S. W., Doh, J., & Cho, D.-W. (2014) · Biofabrication · doi:10.1088/1758-5082/6/3/035004 · Cited by 213
Beckwitt, C. H., Clark, A. M., Wheeler, S., Taylor, D. L., Stolz, D. B., Griffith, L., & Wells, A. (2018) · Experimental Cell Research · doi:10.1016/j.yexcr.2017.12.023 · Cited by 208
Piezoelectric inkjet printing of polymers: Stem cell patterning on polymer substrates
Kim, J. D., Choi, J. S., Kim, B. S., Chan Choi, Y., & Cho, Y. W. (2010) · Polymer · doi:10.1016/j.polymer.2010.03.038 · Cited by 206
Sustained Release of BMP-2 in Bioprinted Alginate for Osteogenicity in Mice and Rats
Poldervaart, M. T., Wang, H., van der Stok, J., Weinans, H., Leeuwenburgh, S. C. G., Öner, F. C., Dhert, W. J. A., & Alblas, J. (2013) · PLoS ONE · doi:10.1371/journal.pone.0072610 · Cited by 202
Formation of droplet networks that function in aqueous environments
Villar, G., Heron, A. J., & Bayley, H. (2011) · Nature Nanotechnology · doi:10.1038/nnano.2011.183 · Cited by 200
Engineering biofunctional in vitro vessel models using a multilayer bioprinting technique
Schöneberg, J., De Lorenzi, F., Theek, B., Blaeser, A., Rommel, D., Kuehne, A. J. C., Kießling, F., & Fischer, H. (2018) · Scientific Reports · doi:10.1038/s41598-018-28715-0 · Cited by 196
Electrically Driven Microengineered Bioinspired Soft Robots
Shin, S. R., Migliori, B., Miccoli, B., Li, Y., Mostafalu, P., Seo, J., Mandla, S., Enrico, A., Antona, S., Sabarish, R., et al. (2018) · Advanced Materials · doi:10.1002/adma.201704189 · Cited by 195
3D Printing of Organs-On-Chips
Yi, H.-G., Lee, H., & Cho, D.-W. (2017) · Bioengineering · doi:10.3390/bioengineering4010010 · Cited by 193
Elbert, D. L. (2011) · Current Opinion in Biotechnology · doi:10.1016/j.copbio.2011.04.001 · Cited by 191
Sequential crosslinking to control cellular spreading in 3-dimensional hydrogels
Khetan, S., Katz, J. S., & Burdick, J. A. (2009) · Soft Matter · doi:10.1039/b820385g · Cited by 186
Neufurth, M., Wang, X., Schröder, H. C., Feng, Q., Diehl-Seifert, B., Ziebart, T., Steffen, R., Wang, S., & Müller, W. E. G. (2014) · Biomaterials · doi:10.1016/j.biomaterials.2014.07.002 · Cited by 185
Coaxial 3D bioprinting of self-assembled multicellular heterogeneous tumor fibers
Dai, X., Liu, L., Ouyang, J., Li, X., Zhang, X., Lan, Q., & Xu, T. (2017) · Scientific Reports · doi:10.1038/s41598-017-01581-y · Cited by 173
Optimization of cell-laden bioinks for 3D bioprinting and efficient infection with influenza A virus
Berg, J., Hiller, T., Kissner, M. S., Qazi, T. H., Duda, G. N., Hocke, A. C., Hippenstiel, S., Elomaa, L., Weinhart, M., Fahrenson, C., et al. (2018) · Scientific Reports · doi:10.1038/s41598-018-31880-x · Cited by 169
Well-Defined Uncharged Polymers with a Sharp UCST in Water and in Physiological Milieu
Glatzel, S., Laschewsky, A., & Lutz, J. (2010) · Macromolecules · doi:10.1021/ma102677k · Cited by 166
In vitro characterization of chitosan scaffolds: influence of composition and deacetylation degree
Tığlı, R. S., Karakeçili, A. G., & Gümüşderelíoğlu, M. (2007) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-007-3066-x · Cited by 163
3D printing facilitated scaffold-free tissue unit fabrication
Tan, Y. J., Richards, D., Trusk, T. C., Visconti, R. P., Yost, M. J., Kindy, M. S., Drake, C. J., Argraves, W. S., Markwald, R. R., & Mei, Y. (2014) · Biofabrication · doi:10.1088/1758-5082/6/2/024111 · Cited by 163
Yeo, M., Lee, J.-S., Chun, W., & Kim, G. H. (2016) · Biomacromolecules · doi:10.1021/acs.biomac.5b01764 · Cited by 159
4D Printing of Robust Hydrogels Consisted of Agarose Nanofibers and Polyacrylamide
Guo, J., Zhang, R., Zhang, L., & Cao, X. (2018) · ACS Macro Letters · doi:10.1021/acsmacrolett.7b00957 · Cited by 159
Yanez, M., Rincon, J., Dones, A., De Maria, C., Gonzales, R., & Boland, T. (2015) · Tissue Engineering Part A · doi:10.1089/ten.tea.2013.0561 · Cited by 158
Characterisation of hyaluronic acid methylcellulose hydrogels for 3D bioprinting
Law, N., Doney, B., Glover, H., Qin, Y., Aman, Z. M., Sercombe, T. B., Liew, L. J., Dilley, R. J., & Doyle, B. J. (2018) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2017.09.031 · Cited by 158
Gelatin methacrylate microspheres for controlled growth factor release
Anh, N. T. V., McKinney, J. M., Miller, T., Bongiorno, T., & McDevitt, T. C. (2014) · Acta Biomaterialia · doi:10.1016/j.actbio.2014.11.028 · Cited by 151
From material to tissue: Biomaterial development, scaffold fabrication, and tissue engineering
Kretlow, J. D., & Mikos, A. G. (2008) · AIChE Journal · doi:10.1002/aic.11610 · Cited by 137
Photochemically Cross-Linked Collagen Gels as Three-Dimensional Scaffolds for Tissue Engineering
Ibusuki, S., Halbesma, G. J., Randolph, M. A., Redmond, R. W., Kochevar, I. E., & Gill, T. J. (2007) · Tissue Engineering · doi:10.1089/ten.2006.0153 · Cited by 134
BMSCs-laden gelatin/sodium alginate/carboxymethyl chitosan hydrogel for 3D bioprinting
Huang, J., Fu, H., Wang, Z., Meng, Q., Liu, S., Wang, H., Zheng, X., Dai, J., & Zhang, Z. (2016) · RSC Advances · doi:10.1039/c6ra24231f · Cited by 128
Attalla, R., Ling, C. S. N., & Selvaganapathy, P. R. (2016) · Biomedical Microdevices · doi:10.1007/s10544-016-0042-6 · Cited by 126
Ge, Z., Tian, X., Heng, B. C., Fan, V., Yeo, J. F., & Cao, T. (2009) · Biomedical Materials · doi:10.1088/1748-6041/4/2/021001 · Cited by 125
Ng, W. L., Goh, M. H., Yeong, W. Y., & Naing, M. W. (2018) · Biomaterials Science · doi:10.1039/c7bm01015j · Cited by 114
The emergence of 3D bioprinting in organ-on-chip systems
Fetah, K., Tebon, P. J., Goudie, M. J., Eichenbaum, J., Ren, L. M., de Barros, N. R., Nasiri, R., Ahadian, S., Ashammakhi, N. A., Dokmeci, M. R., et al. (2019) · Progress in Biomedical Engineering · doi:10.1088/2516-1091/ab23df · Cited by 112
Won, J.-Y., Park, C.-Y., Bae, J.-H., Ahn, G., Kim, C., Lim, D.-H., Cho, D.-W., Yun, W.-S., Shim, J.-H., & Huh, J. (2016) · Biomedical Materials · doi:10.1088/1748-6041/11/5/055013 · Cited by 110
Morton, S. W., Herlihy, K. P., Shopsowitz, K. E., Deng, Z. J., Chu, K. S., Bowerman, C. J., DeSimone, J. M., & Hammond, P. T. (2013) · Advanced Materials · doi:10.1002/adma.201302025 · Cited by 108
An ultrafast hydrogel photocrosslinking method for direct laser bioprinting
Wang, Z., Jin, X., Dai, R., Holzman, J. F., & Kim, K. (2016) · RSC Advances · doi:10.1039/c5ra24910d · Cited by 101
Cell(MC3T3‐E1)‐Printed Poly( ϵ ‐caprolactone)/Alginate Hybrid Scaffolds for Tissue Regeneration
Lee, H., Ahn, S., Bonassar, L. J., & Kim, G. (2012) · Macromolecular Rapid Communications · doi:10.1002/marc.201200524 · Cited by 97
Perspective: Fabrication of integrated organ-on-a-chip via bioprinting
Yang, Q., Lian, Q., & Xu, F. (2017) · Biomicrofluidics · doi:10.1063/1.4982945 · Cited by 95
Effect of the pore size in a 3D bioprinted gelatin scaffold on fibroblast proliferation
Choi, D. J., Park, S. J., Gu, B. K., Kim, Y. J., Chung, S. H., & Kim, C. (2018) · Journal of Industrial and Engineering Chemistry · doi:10.1016/j.jiec.2018.07.013 · Cited by 95
Enhanced cell functions on graphene oxide incorporated 3D printed polycaprolactone scaffolds
Unagolla, J. M., & Jayasuriya, A. C. (2019) · Materials Science and Engineering C · doi:10.1016/j.msec.2019.04.026 · Cited by 87
Self-citationRajaram, A., Schreyer, D. J., & Chen, D. (2015) · Journal of Biomaterials Science Polymer Edition · doi:10.1080/09205063.2015.1016383 · Cited by 82
Advancing Tissue Engineering: A Tale of Nano‐, Micro‐, and Macroscale Integration
Leijten, J., Rouwkema, J., Zhang, Y. S., Nasajpour, A., Dokmeci, M. R., & Khademhosseini, A. (2015) · Small · doi:10.1002/smll.201501798 · Cited by 77
3D bioprinting of cell-laden hydrogels for advanced tissue engineering
Blaeser, A., Campos, D. F. D., & Fischer, H. (2017) · Current Opinion in Biomedical Engineering · doi:10.1016/j.cobme.2017.04.003 · Cited by 77
Raucci, M. G., D’Amora, U., Ronca, A., Demitri, C., & Ambrosio, L. (2019) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2019.00027 · Cited by 77
Notch insensitive and self-healing PNIPAm–PAM–clay nanocomposite hydrogels
Wang, T., Zheng, S., Sun, W., Liu, X., Fu, S., & Tong, Z. (2014) · Soft Matter · doi:10.1039/c3sm52961d · Cited by 74
Wang, Q., Xia, Q., Wu, Y., Zhang, X., Wen, F., Chen, X., Zhang, S., Heng, B. C., He, Y., & Ouyang, H. (2015) · Advanced Healthcare Materials · doi:10.1002/adhm.201500211 · Cited by 71
Ge, Z., Wang, L., Heng, B. C., Tian, X., Lü, K., Fan, V., Yeo, J. F., Cao, T., & Tan, E. X. X. (2008) · Journal of Biomaterials Applications · doi:10.1177/0885328208094301 · Cited by 70
Bioprinting Using Mechanically Robust Core–Shell Cell‐Laden Hydrogel Strands
Mistry, P., Aied, A., Alexander, M. R., Shakesheff, K. M., Bennett, A. J., & Yang, J. (2017) · Macromolecular Bioscience · doi:10.1002/mabi.201600472 · Cited by 62
High-resolution direct 3D printed PLGA scaffolds: print and shrink
Chia, H. N., & Wu, B. M. (2014) · Biofabrication · doi:10.1088/1758-5090/7/1/015002 · Cited by 50
Unagolla, J. M., Alahmadi, T. E., & Jayasuriya, A. C. (2018) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2018.07.044 · Cited by 39
Self-citationCell-Laden 3D Printed Scaffolds for Bone Tissue Engineering
Piard, C., Chen, Y., & Fisher, J. P. (2015) · Clinical Reviews in Bone and Mineral Metabolism · doi:10.1007/s12018-015-9198-5 · Cited by 37
Cited by
Fabrication of physical and chemical crosslinked hydrogels for bone tissue engineering
Xue, X., Hu, Y., Wang, S., Chen, X., Jiang, Y., & Su, J. (2022) · Bioactive Materials · doi:10.1016/j.bioactmat.2021.10.029 · Cited by 423
Fabrication of Biomedical Scaffolds Using Biodegradable Polymers.
Kirillova, A., Yeazel, T. R., Asheghali, D., Petersen, S. R., Dort, S., Gall, K., & Becker, M. L. (2021) · Chemical Reviews · doi:10.1021/acs.chemrev.0c01200 · Cited by 368
Askari, M., Afzali Naniz, M., Kouhi, M., Saberi, A., Zolfagharian, A., & Bodaghi, M. (2021) · Biomaterials Science · doi:10.1039/d0bm00973c · Cited by 369
Pita-López, M. L., Fletes-Vargas, G., Espinosa-Andrews, H., & Rodríguez-Rodríguez, R. (2021) · European Polymer Journal · doi:10.1016/j.eurpolymj.2020.110176 · Cited by 256
Bom, S., Ribeiro, R., Ribeiro, H. M., Santos, C., & Marto, J. (2022) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2022.121506 · Cited by 230
Metadata
- Authors
- Unagolla, J. M., & Jayasuriya, A. C.
- Venue
- Applied Materials Today
- Publisher
- Elsevier BV
- Published
- 2020-03
- Volume
- 18
- Pages
- 100479
- ISSN
- 2352-9407 (ISSN-L)
- OpenAlex
- W2979292841
- Cited by
- 544
- References
- 182
- FWCI
- 18.49
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.