Metal Oxide Thin Films for Advanced Photonic Applications
Open accessThe DOI matches its Crossref record; 301 of the 306 references it cites were found in a registry or an index, and 5 are not checked yet; 46 of the 136 sources its claims cite were checked for support.
Abstract
Oxide materials represent a versatile and fundamental platform for photonics, allowing the manipulation of light through optical property engineering. This review focuses mainly on the physics and applications of simple oxides, analysing their use in the realisation of dielectric mirrors, in particular of distributed Bragg reflectors, and planar microcavities. Critical aspects regarding the design of multilayer structures, the control of optical confinement and the improvement of the quality factor in passive devices are discussed. However, to provide a complete picture of the evolution of the field, the section dedicated to oxide materials anticipates future directions dominated by complex oxides such as lithium niobate, lithium tantalate and barium titanate required for active photonics. In this context, a necessary technological paradigm shift is highlighted: the transition from the current use of film-on-insulator platforms to the direct epitaxial growth of these functional materials, an essential step for the scalability and monolithic integration of future photonic devices.
Verified 2026-10-08 · 5 references not checked yet
Overview
CoChat Summary
TL;DR
This review surveys metal-oxide thin films for advanced photonics, focusing on dielectric mirrors, distributed Bragg reflectors (DBRs), and planar microcavities, while also previewing complex oxides for active photonics. It argues that material pair, deposition technique, and architecture govern mirror reflectivity and cavity quality factor, and that future scalability requires a shift toward direct epitaxial growth.
Key findings
- DBR performance depends strongly on optical contrast and pair number: examples include SiO₂/ZrO₂ with R ≥ 95% at 366 nm and PBG 82 nm for an eight-pair structure; SiO₂/Al₂O₃ with R ≥ 97% at 290 nm; Al₂O₃/ZrO₂ with R = 99.8% at 377 nm for a 12.5-pair structure; Al₂O₃/YSZ with R = 99.7% for 10-period bilayer films; Al₂O₃/TiO₂ with R = 98.1% at 471 nm and PBG 79 nm for six-period bilayer films; and SiO₂/TiO₂ with 99.99% and tuneable PBG from visible to NIR via sol-gel spin coating.
- Refractive indices vary by deposition method: SiO₂ shows n = 1.46–1.52 at 633 nm by PLD, 1.41–1.52 by RF magnetron sputtering, and 1.43–1.49 by e-beam evaporation; TiO₂ shows n = 2.6 at 550 nm by PLD, 2.57–2.74 by RF magnetron sputtering, and 2.06–2.08 by e-beam evaporation.
- Planar microcavity quality factors in Table 8 range widely, e.g., SiO₂/HfO₂/Al with ZnO active layer Q = 4250; SiO₂/HfO₂ with HfO₂ Q = 3700; Al₂O₃/YSZ with ZnO Q = 1000; SiO₂/Ta₂O₅ with organics Q = 1000; SiO₂/TiO₂ with Er³⁺-doped SiO₂ Q = 890; and SiO₂/TiO₂ with TiO₂ Q = 35.
- Complex oxides are highlighted for active photonics: LiNbO₃ has r₃₃ = 30.9 pm/V, d₃₃ = 27 pm/V, n ≈ 2.2 ordinary and 2.1 extraordinary, and transparency from 0.4 to 5.5 µm; LiTaO₃ has r₃₃ = 30.5 pm/V and bandgap 3.93 eV; BaTiO₃ has a Pockels coefficient larger than 1000 pm/V and transparency from 460 to 6300 nm.
Methods
- This is a review article; the Data Availability Statement says “No new data were created or analysed in this study.”
- It synthesizes literature on oxide thin-film processing, dielectric mirrors/DBRs, and planar optical microcavities, with tables comparing material pairs, refractive indices, deposition processes, and microcavity Q factors.
- The main analysis is qualitative and comparative, discussing PVD, CVD, and solution-based routes, and linking deposition method to film density, refractive index, stress, optical losses, and device performance.
Limitations
- The paper states that planar Fabry–Pérot cavities generally offer less spatial confinement (larger V_eff) and more modest temporal confinement (lower Q) than whispering gallery resonators and complex photonic structures, and that their architecture limits confinement effects.
- It states that large-scale deposition studies are scarce because of challenges in obtaining uniform films on large surfaces, stress-induced defects, time and manufacturing cost, and difficult metrology on large surfaces.
- Evident from the text: as a review, it provides no original experimental validation, and it notes method-specific drawbacks such as solution-based poor interface quality and porosity, CVD high temperatures, PVD higher cost, and MBE infrastructure/high-vacuum requirements with lower growth rates.
Model-written summary. Check it against the paper before relying on it.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
29 Valid · 8 Not valid · 42 Not checked · 29 Own results and interpretations
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“Owing to a broad-spectrum transparency and high thermal and chemical stability, tantalum pentoxide (Ta2O5) is among the high-refractive-index materials frequently used in optical coatings, from antireflective to guiding thin films (cores) in waveguides operating at high temperatures [45-48].”
What the sources say
- Not checked — no full text of the sourcecites [45] Belt, 2017, Ultra-Low-Loss Ta2O5-Core/SiO2-Clad Planar Waveguides on Si Substrates, Optica source
- Not checked — no full text of the sourcecites [46] Pal, 2023, Sol-Gel Prepared Amorphous Ta2O5 Thin Film for Application in High LIDT Antireflection Coating and UV Photodetection, Opt. Mater. source
- Not checked — no full text of the sourcecites [47] Vernhes, 2014, Reactive HiPIMS Deposition of SiO2/Ta2O5 Optical Interference Filters, J. Appl. Phys. source
- Partly supportedcites [48] Pal, 2025, Sol-Gel Dip Coating of Ta2O5/SiO2 Anti-Reflection Films on Fused Silica for Developing Laser Optics with High Laser Induced Damage Threshold, J. Solgel Sci. Technol. sourceExperimental — accuracy not yet measured
Section 3.3 (page unavailable) reports a higher refractive index for the Ta2O5 film than for SiO2, and Section 3.5 describes Ta2O5/SiO2 antireflection coatings at four wavelengths. The cited paper does not establish that Ta2O5 is frequently used as a guiding core in high-temperature waveguides, or attribute that range of uses to broad-spectrum transparency and high thermal and chemical stability. (LLM, conf=0.86)
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“The most commonly used material to fabricate dielectric mirrors is silicon dioxide (SiO2).”
What the sources say
- Not checked — no full text of the sourcecites [27] Manikanta, R.V., Mahesh, C.U., and Yepuri, V. (2025). Light Matters: Fabrication and Investigation of Optical and Wetting Properties of TiO2/SiO2 Multilayer Structure. J. Opt. source
- Not checked — no full text of the sourcecites [28] Chichibu, 2006, Dielectric SiO2/ZrO2 Distributed Bragg Reflectors for ZnO Microcavities Prepared by the Reactive Helicon-Wave-Excited-Plasma Sputtering Method, Appl. Phys. Lett. source
- Not checked — no full text of the sourcecites [29] Cui, 2022, Conductive SiO2/HfO2 distributed Bragg Reflector Achieved by Electrical Breakdown and Its Application in GaN-Based Light Emitters, J. Appl. Phys. source
- Partly supportedcites [30] Robinson, 2021, Thermal Noise and Mechanical Loss of SiO2/Ta2O5 Optical Coatings at Cryogenic Temperatures, Opt. Lett. sourceExperimental — accuracy not yet measured
The introduction (p. 1) says SiO2 and Ta2O5 are the most common choices for the low- and high-refractive-index layers of highly reflective optical coatings, respectively. This supports SiO2 as a common mirror-coating material, but not the claim that it alone is the most commonly used material for dielectric mirrors. (LLM, conf=0.84)
- Partly supportedcites [31] Kim, S., In, J.H., Kim, S.H., Han, K., Lim, D., Hwang, Y.S., Lee, K.M., and Choi, J.H. (2023). Study of High Transmittance of SiO2/Nb2O5 Multilayer Thin Films Deposited by Plasma-Assisted Reactive Magnetron Sputtering. Appl. Sci., 13. sourceExperimental — accuracy not yet measured
The Introduction (page unavailable) calls SiO2 a well-known low-refractive-index material in optical multilayer systems, and the Results and Discussion describe SiO2-containing commercial coatings. These passages support its use in such coatings, but do not establish that it is the most commonly used material for dielectric mirrors. (LLM, conf=0.82)
- Not checked — no full text of the sourcecites [32] Grilli, 2009, Al2O3/SiO2 and HfO2/SiO2 Dichroic Mirrors for UV Solid-State Lasers, Thin Solid Films source
- Not checked — no full text of the sourcecites [33] Jiang, 2024, High-Performance SiO2-SiNx Distributed Bragg Reflectors Fabricated by Ion-Assisted Reactive Magnetron Sputtering, Vacuum source
- Partly supportedcites [34] Steinlechner, 2014, Optical Absorption Measurement at 1550nm on a Highly-Reflective Si/SiO2 Coating Stack, Class. Quantum Gravity sourceExperimental — accuracy not yet measured
The Introduction (p. 1) describes silica (SiO2) and tantala as the materials in well-established dielectric mirror coatings for gravitational-wave detectors. This supports SiO2 as an established mirror-coating material, but not the broader claim that it is the most commonly used material for dielectric mirrors generally. (LLM, conf=0.85)
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
Every source the paper cites for this claim was checked and supports it.
In the paper
“Recent studies [156] have also shown that the gas flow during ICPVD deposition is the primary parameter that can adjust the stress in SiO2 thin films between tensile and compressive states, whilst not significantly altering the refractive index of the material.”
What the sources say
- Supportedcites [156] Wostbrock, N., and Busani, T. (2020). Stress and Refractive Index Control of SiO2 Thin Films for Suspended Waveguides. Nanomaterials, 10. source
The Conclusions identify gas flowrate as the primary variable for depositing tensile or compressive SiO2 films without significantly affecting refractive index. The Results specify that refractive index remained unchanged as flowrate varied within a given gas ratio. (LLM, conf=0.94)
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Supported
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“For example, in the case of PLD, 'atomic peening' and collision-induced densification result in compressive stress [153].”
What the sources say
- Partly supportedcites [153] Chason, 2016, A Kinetic Model for Stress Generation in Thin Films Grown from Energetic Vapor Fluxes, J. Appl. Phys. sourceExperimental — accuracy not yet measured
The Introduction (page unavailable) identifies pulsed laser deposition as an energetic deposition process and says energetic bombardment may cause atomic peening, compressive stress, and collision-induced densification. The Kinetic Model section (page unavailable) links collision-induced densification to compressive stress. The paper does not establish that both mechanisms result in compressive stress specifically in PLD; its wording about peening is also qualified as a possibility. (LLM, conf=0.82)
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Partly supported
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“Another key feature to take into account is that, in the case of manufacturing DBRs on large wafers, the stress appears due to the interactions of the thin film and the substrate curvature, resulting in a nonlinear stress distribution across the wafer [151].”
What the sources say
- Partly supportedcites [151] Sun, 2018, Investigation for the Structural Stress of SiO2 Thin Films and Its Distribution on the Large-Wafer Created by Plasma Enhanced Chemical Vapor Deposition, AIP Adv. sourceExperimental — accuracy not yet measured
Section II says interactions among film layers and the substrate generate structural stress that depends on curvature and position across the wafer. The Conclusions report a nonlinear distribution of structural stress. The paper studies PECVD SiO₂ films on large silicon wafers, however, and does not establish the finding specifically for DBR manufacturing. (LLM, conf=0.86)
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Partly supported
27 more claims · 3 with their cited sources checked
Create a free account to see all 108 claims and every source verdict.
- It may state two separate claims as one. 55
- Probably not a substantial claim. 35
- Borderline: one of the tests for a substantial claim is unclear. 1
- The quote only partly states this claim. 2
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
Each contradiction between two passages listed here was confirmed by an independent check.
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
§ 2. Oxide Materials and Their Subsequent Functionalization for Dielectric Coatings
“| PVD | Electron cyclotron resonance ion beam deposition Electron beam evaporation (e-beam) Radio frequency magnetron sputtering (RF magnetron) Pulsed laser deposition (PLD) | 1.74-1.95 2.0419 <2.2 >2.2 | - - >5 × 10 - 4 | [72] [73] [74] [75] |”
§ References
“75. Zhang, J.Y.; Boyd, I.W. Thin Tantalum and Tantalum Oxide Films Grown by Pulsed Laser Deposition.”
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
§ 2.2. Thin Film Properties for Dielectric Mirrors
“In contrast to the e-beam technique, magnetron sputtering can provide values higher than n = 2.24 at λ = 550 nm for TiO2 films, even at room temperature [150].”
§ References
“150. Zhao, Z.; Tay, B.K.; Yu, G. Room-Temperature Deposition of Amorphous Titanium Dioxide Thin Film with High Refractive Index by a Filtered Cathodic Vacuum Arc Technique.”
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
§ 2.3. Stoichiometrically Complex Oxides with Optically Tunable Properties Under Electrical, Mechanical or Acoustic Excitation
“This material shows an enhanced chemical stability by simply replacing the Nb atoms with Ta atoms [184], as well as a wider bandgap (3.93 eV [185]), facilitating nonlinear optical conversion in the Vis and UV regions [186].”
§ References
“185. Zanatta, A.R. The Optical Bandgap of Lithium Niobate (LiNbO3) and Its Dependence with Temperature.”
Cited works that were retracted
Works this paper cites that were later retracted, from the retraction notices publishers deposit. Major when the notice came out before this paper was published.
Rated major: it would touch a result — a value a result rests on, reported and recomputed p-values on opposite sides of the significance level, two passages that conflict with no sign which is right, or a cited work retracted before this paper was published.
Cited work 10.1002/pssa.200306153 · retracted 2004-12-13 · notice 10.1002/pssa.200406923 · this paper published 2026-02-27
Citations
Cites
1 retracted
Items 201–301 of 301
Melt‐processed polymer multilayer distributed feedback lasers: Progress and prospects
Andrews, J. H., Crescimanno, M., Singer, K. D., & Baer, E. (2013) · Journal of Polymer Science Part B Polymer Physics · doi:10.1002/polb.23425 · Cited by 19 · cited 1×
“…materials such as monocrystalline semiconductors [132,133], superlattices [134], nitrides [135], fluorides [136], oxide nanoparticles [137], and also polymers [138,139] have been chosen to manufacture DBRs through different processes (PVD, CVD, solution-based processing and even hybrid methods).”
Optical properties of photonic molecules and elliptical pillars made of ZnSe-based microcavities
Sebald, K., Seyfried, M., Klembt, S., & Kruse, C. (2011) · Optics Express · doi:10.1364/oe.19.019422 · Cited by 19 · cited 1×
“Besides the classical metal oxides, materials such as monocrystalline semiconductors [132,133], superlattices [134], nitrides [135], fluorides [136], oxide nanoparticles [137], and also polymers [138,139] have been chosen to manufacture DBRs through different processes (PVD, CVD, solution-based…”
Vertical Microcavity Organic Light-emitting Field-effect Transistors
Hu, Y., Lin, J., Song, L., et al. (2016) · Scientific Reports · doi:10.1038/srep23210 · Cited by 19
Lee, G. J., Hong, I. Y., Kim, T. K., Park, H. J., Oh, S. K., Cha, Y.-J., Park, M. J., Choi, K. J., & Kwak, J. S. (2019) · Applied Surface Science · doi:10.1016/j.apsusc.2017.10.144 · Cited by 19
(INVITED)Planar Microcavities: Materials and Processing for Light Control
Megahd, H., Comoretto, D., & Lova, P. (2022) · Optical Materials: X · doi:10.1016/j.omx.2021.100130 · Cited by 19
Chinnasamy, M., Rathanasamy, R., Sivaraj, S., et al. (2022) · Journal of Electronic Materials · doi:10.1007/s11664-022-09554-2 · Cited by 18 · cited 1×
“…indices; fluorides (e.g., MgF 2 , CaF 2 , etc.), employed as low-index materials [20–22]; nitrides (e.g., SiN, AlN), valued for their high refractive indices and barrier properties [11,23]; and sulfides/selenides (e.g., ZnS, ZnSe), preferred for their applicability in the infrared region [24–26].”
Zahid, M. A., Hussain, S. Q., Cho, Y. H., et al. (2020) · Applied Sciences · doi:10.3390/app10165647 · Cited by 18
Ciolan, M. A., & Motrescu, I. (2022) · Applied Sciences · doi:10.3390/app12020917 · Cited by 18 · cited 1×
“…employed to grow thin films, a variety of deposition techniques can be used, from physical vapour (such as sputtering-based deposition [103–105], e-beam evaporation [106,107], pulsed laser deposition [108,109]) to chemical [110] and solution-based solutions [111], depending on the intended purpose.”
Oh, S. H., Lee, T. H., Son, K. R., & Kim, T. G. (2018) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2018.09.287 · Cited by 18
Nougaret, L., Combette, P., & Pascal-Delannoy, F. (2008) · Thin Solid Films · doi:10.1016/j.tsf.2008.08.177 · Cited by 18 · cited 1×
“Regarding the preparation of LT thin films through classical deposition methods, these are largely divided: sol–gel [193,194], magnetron sputtering [195,196] and MBE methods [197,198].”
Presti, F. L., Pellegrino, A. L., Micard, Q., Condorelli, G. G., Margueron, S. H., Bartasyte, A., & Malandrino, G. (2024) · Nanomaterials · doi:10.3390/nano14040345 · Cited by 18
Boucher, Y. G., Chiasera, A., Ferrari, M., & Righini, G. C. (2009) · Journal of Luminescence · doi:10.1016/j.jlumin.2009.04.085 · Cited by 18
Gier, C., Ben Yaala, M., Wiseman, C., MacFoy, S., Chicoine, M., Schiettekatte, F., Hough, J., Rowan, S., Martin, I., MacKay, P., et al. (2023) · Thin Solid Films · doi:10.1016/j.tsf.2023.139781 · Cited by 17 · cited 1×
“This deposition method is valued for its ability to produce thin films with low scattering and absorption and a high density (and thus a high refractive index) [50,72].”
Extended Transfer Matrix Modeling of an Erbium-Doped Cavity with SiO2/TiO2 Bragg Reflectors
Boucher, Y. G., Chiasera, A., Ferrari, M., & Righini, G. C. (2009) · Optical Materials · doi:10.1016/j.optmat.2008.10.028 · Cited by 16
LiTaO3 films with c-axis preferred orientation prepared on Si(111) substrate by sol–gel method
Cheng, S., Zhou, Y. C., Kam, C. H., et al. (2000) · Materials Letters · doi:10.1016/s0167-577x(00)00014-8 · Cited by 16
Homo-epitaxial growth of LiNbO3 thin films by Pulsed Laser deposition
Sauze, L. C., Vaxelaire, N., Templier, R., et al. (2022) · Journal of Crystal Growth · doi:10.1016/j.jcrysgro.2022.126950 · Cited by 16
Orosz, L., Réveret, F., Bouchoule, S., Zúñiga-Pérez, J., Médard, F., Leymarie, J., Disseix, P., Mihailovic, M., Frayssinet, É., Sèmond, F., et al. (2011) · Applied Physics Express · doi:10.1143/apex.4.072001 · Cited by 16
Henke, T. E., Knaut, M., Geidel, M., et al. (2017) · Thin Solid Films · doi:10.1016/j.tsf.2017.02.047 · Cited by 15
Dubey, R. S., & Ganesan, V. (2018) · Superlattices and Microstructures · doi:10.1016/j.spmi.2018.08.005 · Cited by 15
Zeng, X., Pelenovich, V., Xu, C., Neena, D., Jiang, Y., Zhang, X., Pogrebnjak, A. D., Rakhimov, R. R., Zhang, J., Yang, B., et al. (2023) · Ceramics International · doi:10.1016/j.ceramint.2023.01.228 · Cited by 15 · cited 1×
“…to grow this material through a classical thin film deposition technique, which requires a compatibility with standard semiconductor technology processing on an industrial-grade level substrate, such as PVD (PLD [171], sputtering-based methods [172]) and solution-based routes (sol–gel [173], etc.).”
Jiang, Y., You, D., Cao, Y., Guo, W., & Tan, M. (2024) · Vacuum · doi:10.1016/j.vacuum.2023.112775 · Cited by 15
Milani, E. A., Piralaee, M., & Asgari, A. (2023) · Scientific Reports · doi:10.1038/s41598-023-36488-4 · Cited by 15
Morozov, K. M., Ivanov, K. A., Belonovski, A. V., Girshova, E. I., Pereira, D. D. S., Menelaou, C., Pander, P., Franca, L. G., Monkman, A. P., Pozina, G., et al. (2020) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.0c05091 · Cited by 15 · cited 1×
“In the latter situation, the optical microstructures are referred to as hybrid and plasmonic Fabry–Pérot cavities [256–259].”
Homoepitaxial nonpolar (10-10) ZnO/ZnMgO monolithic microcavities: Towards reduced photonic disorder
Zúñiga-Pérez, J., Kappei, L., Deparis, C., Réveret, F., Grundmann, M., de Prado, E., Jamadi, O., Leymarie, J., Chenot, S., & Leroux, M. (2016) · Applied Physics Letters · doi:10.1063/1.4954796 · Cited by 15
Optical absorption measurement at 1550 nm on a highly-reflective Si/SiO 2 coating stack
Steinlechner, J., Khalaidovski, A., & Schnabel, R. (2014) · Classical and Quantum Gravity · doi:10.1088/0264-9381/31/10/105005 · Cited by 14 · cited 1×
“…transparency and low refractive index (tuneable through the underlying deposition method and parameters—will be subsequently discussed), it provides sufficient optical contrast when paired with materials such as TiO 2 , ZrO 2 , HfO 2 , Ta 2 O 5 , Nb 2 O 5 and even Al 2 O 3 , among others [27–34].”
Reynaud, M., Waqar, M., Du, C., Posadas, A. B., Pan, X., & Demkov, A. A. (2025) · Communications Materials · doi:10.1038/s43246-025-00908-x · Cited by 14
Light‐Harvesting Properties of a Subphthalocyanine Solar Absorber Coupled to an Optical Cavity
Esteso, V., Calió, L., Espinós, H., Lavarda, G., Torres⊗, T., Feist, J., García-Vidal, F. J., Bottari, G., & Míguez, H. (2021) · Solar RRL · doi:10.1002/solr.202100308 · Cited by 14 · cited 1×
“In the latter situation, the optical microstructures are referred to as hybrid and plasmonic Fabry–Pérot cavities [256–259].”
Nanoscale-Thick Thin Films of High-Density HfO 2 for Bulk-like Optical Responses
Sun, L., Jones, J. G., Grant, J. T., Murphy, N. R., Ramana, C. V., Eyink, K. G., Vernon, J. P., & Stevenson, P. R. (2021) · ACS Applied Nano Materials · doi:10.1021/acsanm.1c02267 · Cited by 13 · cited 1×
“…wide transparency from UV to mid-IR region (due to its bandgap, which is larger than 5.5 eV [64]) and significant thermal and chemical stability [65] propelled HfO 2 for the manufacture of antireflective coatings [66] and highly reflective mirrors [67], but also in other applications, such as…”
InfluentialLow loss optical waveguides fabricated in LiTaO3 by swift heavy ion irradiation
Tormo-Marquez, V., Díaz-Hijar, M., Carrascosa, M., Shur, V. Y., & Olivares, J. (2019) · Optics Express · doi:10.1364/oe.27.008696 · Cited by 13
Yuan, Z.-S., Jhang, J.-M., Yu, P.-H., Jiang, C.-M., Huang, Y.-C., Wu, Y.-L., Lin, J.-J., & Yang, C.-F. (2020) · Vacuum · doi:10.1016/j.vacuum.2020.109782 · Cited by 12 · cited 4×
“In this context, a SiO 2 /Nb 2 O 5 -based multilayer refractive structure was fabricated for blue light by Yuan et al. using e-beam deposition [41].”
InfluentialLarge area precision optical coatings by reactive ion beam sputtering
Sakiew, W., Schrameyer, S., Schwerdtner, P., et al. (2020) · Applied Optics · doi:10.1364/ao.389883 · Cited by 12 · cited 1×
“Moreover, this method offers thickness uniformity over a large area and smooth interfaces, which are critical factors for multilayer structures, such as dielectric mirrors [54].”
Kumar, V. S. P., Kumar, M., Kumari, N., et al. (2019) · Materials Research Express · doi:10.1088/2053-1591/ab090e · Cited by 12
Pal, S., Kamparath, R., Subrahmanyam, V. V. V., Sharma, N., Biswas, A. K., Singh, R., Tiwari, S., Kumar, Y. P., & Benerji, N. S. (2025) · Journal of Sol-Gel Science and Technology · doi:10.1007/s10971-025-06761-1 · Cited by 12
Advancements and Challenges in Anti-Reflective Coatings: A Comprehensive Review
Song, J., Kumar, P., Raouf, I., & Kim, H. S. (2025) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2025.09.268 · Cited by 12 · cited 1×
“Nevertheless, high operating temperatures and expensive equipment are among the disadvantages of this technique, which reduce its compatibility with materials that are sensitive to high temperatures and increase manufacturing costs [140].”
Tao, Y., Gitmans, F., Sitar, Z., Pierhöfer, H., Kündig, A., Gamboni, I., & Günter, P. (1997) · Ferroelectrics · doi:10.1080/00150199708228374 · Cited by 12
Stress and Refractive Index Control of SiO2 Thin Films for Suspended Waveguides
Wostbrock, N., & Busani, T. (2020) · Nanomaterials · doi:10.3390/nano10112105 · Cited by 12 · cited 1×
“Recent studies [156] have also shown that the gas flow during ICPVD deposition is the primary parameter that can adjust the stress in SiO 2 thin films between tensile and compressive states, whilst not significantly altering the refractive index of the material.”
Cheikh, A., Gonçalves, J., Labbé, C., Portier, X., Marié, P., Frilay, C., Debieu, O., Duprey, S., Jadwisienczak, W. M., Ingram, D. C., et al. (2025) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2025.183273 · Cited by 12
Réveret, F., Bignet, L., Zhigang, W., Lafosse, X., Patriarche, G., Disseix, P., Médard, F., Mihailovic, M., Leymarie, J., Zúñiga-Pérez, J., et al. (2016) · Journal of Applied Physics · doi:10.1063/1.4961658 · Cited by 12
Functionalized Optical Microcavities for Sensing Applications
Granizo, E., Samokhvalov, P., & Nabiev, I. (2025) · Nanomaterials · doi:10.3390/nano15030206 · Cited by 12 · cited 1×
“The resonance phenomenon occurs when the distance between the mirror surfaces (i.e., optical path length) is a multiple of λ c /2, permitting light to be confined within the cavity layer [262].”
Amato, A., Magnozzi, M., Shcheblanov, N., Lemaître, A., Cagnoli, G., Granata, M., Michel, C., Gemme, G., Pinard, L., & Canepa, M. (2023) · ACS Applied Optical Materials · doi:10.1021/acsaom.2c00077 · Cited by 11
Skowroński, Ł., Ciesielski, A., Olszewska, A., et al. (2020) · Materials · doi:10.3390/ma13163510 · Cited by 11 · cited 1×
“…employed to grow thin films, a variety of deposition techniques can be used, from physical vapour (such as sputtering-based deposition [103–105], e-beam evaporation [106,107], pulsed laser deposition [108,109]) to chemical [110] and solution-based solutions [111], depending on the intended purpose.”
Coatings for Optical Applications Produced by Ion Beam Sputter Deposition
Becker, J., & Scheuer, V. (1990) · Applied Optics · doi:10.1364/ao.29.004303 · Cited by 11 · cited 1×
“It appears that, without ion assistance (IAD/PIAD) or an annealing step [148], electron beam deposition tends to produce less dense films and thus lower refractive indices [149].”
Gong, H., Liu, X., Tao, C., Zhao, Y., Shuai, K., Li, D., Zhang, W., Sun, J., Zhou, L., Jiang, Y., et al. (2023) · Optical Materials Express · doi:10.1364/ome.489151 · Cited by 11
Kim, S., In, J.-H., Kim, S. H., Han, K., Lim, D., Hwang, Y. S., Lee, K. M., & Choi, J. H. (2023) · Applied Sciences · doi:10.3390/app132413271 · Cited by 11
Li, X., Chen, J., Wu, G., et al. (2005) · Optics Express · doi:10.1364/opex.13.001346 · Cited by 10 · cited 1×
“Thus, their importance in modern society is understood, becoming indispensable in fields such as energy [4–6], medicine [7], communications [8,9], research [10] and others [11].”
Kumar, M., Kumari, N., Kumar, V. P., et al. (2018) · Materials Today Proceedings · doi:10.1016/j.matpr.2017.11.629 · Cited by 10
Residual Stress Analysis of SiO2 Films Deposited by Plasma-Enhanced Chemical Vapor Deposition
Choi, J.-K., Lee, J., Yoo, J.-B., Maeng, J.-S., & Kim, Y.-M. (2000) · Surface and Coatings Technology · doi:10.1016/s0257-8972(00)00753-2 · Cited by 10
NBI Optical Filters in Minimally Invasive Medical Devices
Silva, M. F., Rodrigues, J. A., Ghaderi, M. A., et al. (2016) · IEEE Journal of Selected Topics in Quantum Electronics · doi:10.1109/jstqe.2016.2514709 · Cited by 9 · cited 1×
“Thus, their importance in modern society is understood, becoming indispensable in fields such as energy [4–6], medicine [7], communications [8,9], research [10] and others [11].”
Mirror Coating Research and Developments for Current and Future Gravitational-Wave Detectors
Amato, A., Magnozzi, M., & Wöhler, J. (2025) · Advanced Photonics Research · doi:10.1002/adpr.202400117 · Cited by 9 · cited 3×
“…optical coatings with reduced thermal noise consists of preparing oxide coatings with multiple cation species, ensuring a higher refractive index and lowering the energy dissipation, as well as increasing crystallisation temperatures, all of which directly affect the sensitivity of GWDs [50].”
Huang, M., & Yan, X. (2004) · Journal of Applied Physics · doi:10.1063/1.1646432 · Cited by 9 · cited 1×
“At the same time, stress-induced birefringence, which appears due to the elastic–optic effect, can alter the polarisation and distort the device temperature sensitivity [157].”
Drikvand, T., Zadsar, M., Neghabi, M., & Amighian, J. (2022) · Optik · doi:10.1016/j.ijleo.2022.169990 · Cited by 9
Afsharipour, E., Park, B., & Shafai, C. (2017) · IEEE photonics journal · doi:10.1109/jphot.2017.2649500 · Cited by 9 · cited 1×
“Bragg structures can also be fabricated using a single material in which the pore gradient varies periodically [233–235].”
Chen, H.-C., Chang, C.-H., & Chen, K.-H. (2024) · Applied Optics · doi:10.1364/ao.540615 · Cited by 8
He, X., Wu, J., Li, X., Gao, X., Zhao, L., & Wu, L. (2009) · Applied Surface Science · doi:10.1016/j.apsusc.2009.08.005 · Cited by 8
Photonic Response and Temperature Evolution of SiO2/TiO2 Multilayers
Christidis, G., Fabrichnaya, O. B., Koepfli, S. M., Poloni, E., Winiger, J., Fedoryshyn, Y. M., Gusarov, A. V., Ilatovskaia, M., Saenko, I., Savinykh, G., et al. (2021) · Journal of Materials Science · doi:10.1007/s10853-021-06557-y · Cited by 8
Characterization of scattering in an optical Fabry-Perot resonator
Klaassen, T., Exter, M. P. V., & Woerdman, J. P. (2007) · Applied Optics · doi:10.1364/ao.46.005210 · Cited by 8 · cited 1×
“The relation between the scattering parameter, denoted s, and the roughness of a surface thin film (r) is given by the following [244]: In summary, the optoelectronic properties can be controlled by introducing an additional step, namely an annealing treatment.”
Quantum dots get a bright upgrade
Ding, F. (2024) · Light Science & Applications · doi:10.1038/s41377-024-01593-0 · Cited by 8 · cited 1×
“…by the optimisation of nonlinear optical schemes in microresonators, such as spontaneous parametric down-conversion (SPDC) and spontaneous four-wave mixing (SFWM) [271,273]; and by deterministic quantum dot sources that simultaneously pursue high brightness and high entanglement fidelity [274,275].”
Sun, D., Sun, Q., Xing, W., Sun, Z., Shang, H., Chang, L., Wang, X., Liu, P., & Hall, T. (2018) · AIP Advances · doi:10.1063/1.5045516 · Cited by 7
Cui, M., Guo, C., Yang, Z., Chen, L., Dai, Y., Xu, H., Guo, W., & Ye, J. (2022) · Journal of Applied Physics · doi:10.1063/5.0074868 · Cited by 7
Sputtered LiNbO3 Thin Films for Application in Integrated Photonics: A Review
Kuznetsov, I. V., Сергеевич, П. А., Gulyaeva, A., & Krutov, V. (2025) · Crystals · doi:10.3390/cryst15030270 · Cited by 6
Wu, H.-Y., Chen, H.-W., Huang, S.-R., Hsiao, L.-J., Cheng, C.-L., Yu, G.-Y., Sun, Y.-S., & Hsu, J.-C. (2024) · Heliyon · doi:10.1016/j.heliyon.2024.e35507 · Cited by 6 · cited 1×
“…result in a reflectivity of over 99.9%, angular and spectral engineering through alternating low-and high-refractive-index materials and adjusting the thickness of each thin film [14], a superior laser-induced damage threshold (LIDT) [15,16], and a superior mechanical and chemical stability [17].”
InfluentialSuppression of Transverse Modes in 50°YX-LiTaO3/SiO2/Si POI SAW Resonator with Groove Configuration
Li, M., Qi, M., Chen, Y., Cheng, Y., Cao, L., & Mu, X. (2024) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.4c07223 · Cited by 6
Solar Coatings Based on Ag Infrared Reflector with High Stability at Medium and High Temperature
Esposito, S., D’Angelo, A., Diletto, C., et al. (2021) · Energies · doi:10.3390/en14185910 · Cited by 6 · cited 1×
“Thus, their importance in modern society is understood, becoming indispensable in fields such as energy [4–6], medicine [7], communications [8,9], research [10] and others [11].”
Free spectral range magnetic tuning of an integrated microcavity
Lei, Y., Hu, Z.-G., Wang, M., Gao, Y., Zuo, Z., Xu, X., & Li, B. (2022) · Fundamental Research · doi:10.1016/j.fmre.2022.11.009 · Cited by 6 · cited 1×
“…these microresonators have gained increased attention from researchers over the years due to their light coupling, enabling their utilisation in many applications, such as filters [250,251], lasers [252], sensors [253,254] and optoelectronic devices such as organic solar cells [232,255].”
Vertical cavity surface emitting lasers (VCSELs)
Choquette, K. D. (2013) · Elsevier eBooks · doi:10.1533/9780857096401.2.316 · Cited by 6 · cited 1×
“…these microresonators have gained increased attention from researchers over the years due to their light coupling, enabling their utilisation in many applications, such as filters [250,251], lasers [252], sensors [253,254] and optoelectronic devices such as organic solar cells [232,255].”
Sepah Mansoor, M., Talebzadeh, N., & O’Brien, P. G. (2025) · Energy Technology · doi:10.1002/ente.202402273 · Cited by 5
Dogra, V., Kishore, C., Mishra, A., et al. (2025) · Materials Research Innovations · doi:10.1080/14328917.2025.2541215 · Cited by 5
Schmidt, B. W., Sweet, W. J., Bierschenk, E. J., et al. (2010) · Journal of Vacuum Science & Technology A Vacuum Surfaces and Films · doi:10.1116/1.3294718 · Cited by 5
Giant Up-Conversion Efficiency of InGaAs Quantum Dots in a Planar Microcavity
Xu, Q., Piermarocchi, C., Pershin, Y. V., et al. (2014) · Scientific Reports · doi:10.1038/srep03953 · Cited by 5 · cited 1×
“Besides the classical metal oxides, materials such as monocrystalline semiconductors [132,133], superlattices [134], nitrides [135], fluorides [136], oxide nanoparticles [137], and also polymers [138,139] have been chosen to manufacture DBRs through different processes (PVD, CVD, solution-based…”
Characterization of LiTaO3 thin films fabricated by sol–gel technique
Youssef, S., Asmar, R. A., Podlecki, J., et al. (2006) · Microelectronics Journal · doi:10.1016/j.mejo.2006.09.010 · Cited by 5
Micro-Opto-Electro-Mechanical Systems for High-Precision Displacement Sensing: A Review
Xin, C., Xu, Y., Zhang, Z., et al. (2024) · doi:10.20944/preprints202407.2195.v1 · Cited by 5
Manikanta, R. V., Mahesh, C. U., & Yepuri, V. (2026) · Journal of Optics · doi:10.1007/s12596-025-02554-5 · Cited by 4
ZnO sol-gel oxide coatings as materials for UV optical filters
Moszak, K., Szczurek, A., Babiarczuk, B., et al. (2017) · Advanced Materials Letters · doi:10.5185/amlett.2017.7108 · Cited by 4 · cited 1×
“Zinc oxide (ZnO) is another oxide that targets standalone optical coatings (antire-flective coatings [93], UV filters [94,95], etc.), along with other applications in various fields, due to its optical, piezoelectric, electrical, and biological properties [96–98].”
Chávez, S. M. R., Ayala, L. M., Karthik, T. V. K., et al. (2024) · Journal of Materials Science Materials in Electronics · doi:10.1007/s10854-024-12502-x · Cited by 4
Mechanical properties characterization for thin layers oxide (Al2O3), deposited by PLD-large area
Manica, D., Ion, V., Sopronyi, M., et al. (2022) · Applied Physics A · doi:10.1007/s00339-022-06098-4 · Cited by 4
Self-citationYamamoto, T., Wakiya, N., Mizutani, N., & Shinozaki, K. (2006) · Key Engineering Materials · doi:10.4028/www.scientific.net/kem.320.57 · Cited by 4
Kumar, V. S. P., Kumar, M., Kumari, N., & Sharma, A. L. (2020) · Optik · doi:10.1016/j.ijleo.2020.165376 · Cited by 4
Lead-Free Perovskite Thin Films with Tailored Pockels-Kerr Effects for Photonics
Ion, V., Teodorescu, V., Birjega, R., Dinescu, M., Mitterbauer, C., Alexandrou, I., Ghitiu, I., Craciun, F., & Scarisoreanu, N. D. (2023) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.3c06499 · Cited by 4 · cited 1×
“…which in recent years has had a growing range of applications, especially in the photonic field [180,202], and more specifically in nonlinear optics due to its Pockels coefficient being larger than 1000 pm/V [203], the highest in comparison to other stoichiometric complex oxides [204,205].”
Self-citationA highly stable and efficient organic microcavity polariton laser
Witt, J., Mischok, A., Roux, F. L., et al. (2024) · MRS Communications · doi:10.1557/s43579-024-00543-6 · Cited by 4
Optical coatings for large facilities
Grèzes-Besset, C., & Chauveau, G. (2013) · Elsevier eBooks · doi:10.1533/9780857097316.4.695 · Cited by 3 · cited 1×
“Thus, their importance in modern society is understood, becoming indispensable in fields such as energy [4–6], medicine [7], communications [8,9], research [10] and others [11].”
Strategy to improve the long-term stability of low-stress e-beam coatings
Zeng, T., Zhu, M., Yin, C., et al. (2020) · Optical Materials Express · doi:10.1364/ome.405283 · Cited by 3 · cited 1×
“Compared to the e-beam deposition technique, which is known to produce porous coatings [43], sputtering methods offer a fine control of stoichiometry and denser films with low optical losses [44].”
Stress Evaluation of Chemical Vapor Deposited Silicon Dioxide Films
Maeda, M., & Itsumi, M. (2002) · Physica B: Condensed Matter · doi:10.1016/s0921-4526(02)01291-7 · Cited by 3 · cited 1×
“A well-known method to overcome the residual stress is increasing the substrate temperature; at the same time, increasing the deposition rate can further increase the tensile intrinsic stress due to local bond disorder and the appearance of voids [155].”
Lithium Niobate on Insulator: An Emerging Nanophotonic Crystal for Optimized Light Control
Murali, M., Banerjee, A., & Basu, T. (2024) · Beilstein Journal of Nanotechnology · doi:10.3762/bjnano.15.114 · Cited by 3 · cited 1×
“…coefficients (d 33 = 27 pm/V), as well as a high value for the refractive index (around n = 2.2 for ordinary axis and n = 2.1 for extraordinary one [168]) and transparency from 0.4 to 5.5 µ m, are some attractive features of this material (monocrystal), which is particularly suitable for…”
InfluentialBasic Optical Engineering for Engineers and Scientists
Sun, H. (2019) · SPIE eBooks · doi:10.1117/3.2504404 · Cited by 3 · cited 1×
“Broadly speaking, these optical films can be classified according to the type of material used in metallic coatings, dielectric coatings, and hybrid coatings (combining both kinds of material), respectively [12].”
Gangalakurti, L., Reddy, K. V., & Chhabra, I. M. (2021) · Materials Today Proceedings · doi:10.1016/j.matpr.2020.11.686 · Cited by 3
Field Confinement and Quality Factor of the Multilayer Cavity Resonators
Yogesh, N., & Subramanian, V. (2011) · Journal of Applied Physics · doi:10.1063/1.3667292 · Cited by 3 · cited 1×
“In a realistic scenario, where absorption, scattering and coupling losses degrade the quality factor of the microcavity [286,287], both the materials and the preparation techniques used for Bragg stacks become decisive and strongly influence the value of Q.”
Zai, M.-I., Lalău, I., Manica, M., et al. (2025) · Surfaces · doi:10.3390/surfaces8030051 · Cited by 2
Self-citationAntireflective properties of Al 2 O 3 /SiO 2 multilayer stacks for GaAs solar cells
Briones, E., Gutiérrez, A., Tapia-Contreras, M., Cortes-Mestizo, I. E., & Briones, J. (2023) · Applied Optics · doi:10.1364/ao.487452 · Cited by 2
Bamba, M., & Ishihara, H. (2011) · Physical Review B · doi:10.1103/physrevb.84.045125 · Cited by 2 · cited 1×
“In parallel, resonator schemes exploiting biexciton resonant hyperparametric scattering (BRHPS) in microcavities offer efficient and spectrally selectable pathways for entangled pairs, where the control of exciton–photon coupling (Rabi splitting) is essential [276,277].”
Rodríguez Lamoso, I., & Preu, S. (2025) · Applied Sciences · doi:10.3390/app15063330 · Cited by 1
Low threshold electrically-pumped vertical-cavity surface-emitting micro-lasers
Jewell, J. L., Scherer, A., McCall, S. L., Lee, Y. H., Walker, S. J., Harbison, J. P., & Florez, L. T. (1989) · Optics News · doi:10.1364/on.15.000010 · Cited by 1
Lithium tantalate photonic integrated circuits for high volume manufacturing
Wang, C., Li, Z., Riemensberger, J., Lihachev, G., Churaev, M., Ji, X., Huang, K., Ou, X., & Kippenberg, T. J. (2024) · Conference on Lasers and Electro-Optics · doi:10.1364/cleo_at.2024.ath1j.5 · Cited by 1
The Suppression of Transverse Modes in POI SAW Resonator with Groove Configuration
Li, M., Qi, M., Chen, Y., Cheng, Y., Cao, L., & Mu, X. (2024) · IEEE International Conference on Nano/Micro Engineered and Molecular Systems · doi:10.1109/nems60219.2024.10639886 · Cited by 1
Accurate measurement and reduction of losses in ion beam sputtering coatings
Ribeaud, A., Pistner, J., Vela-Pérez, I., Lumeau, J. H., Gallais, L., Benz, R., Sturzenegger, C., Eiermann, B., & Mühlig, C. (2024) · Advances in Optical Thin Films · doi:10.1117/12.3023035 · Cited by 1
Comparisons of hafnia/silica anti-reflection coatings
Bellum, J. C., Kletecka, D. E., Potter, J., et al. (2010) · Optical Interference Coatings · doi:10.1364/oic.2010.fa8 · cited 1×
“…(due to its bandgap, which is larger than 5.5 eV [64]) and significant thermal and chemical stability [65] propelled HfO 2 for the manufacture of antireflective coatings [66] and highly reflective mirrors [67], but also in other applications, such as memory devices [68], among others [69,70].”
InfluentialControl of Rabi Splitting Energies in CuCl Microcavities with HfO2/SiO2 Distributed Bragg Reflectors
Nakayama, M., Miyazaki, K., Kawase, T., & Kim, D. (2012) · Physics Procedia · doi:10.1016/j.phpro.2012.03.683
Ion beam interference coating for ultralow optical loss
Wei, D. T. (1989) · Applied Optics · doi:10.1364/ao.28.002813
Yamamoto, T., Wakiya, N., Mizutani, N., & Shinozaki, K. (2006) · Key Engineering Materials · doi:10.4028/0-87849-411-1.57
Study interfacial layer properties of SiO2 films deposited on different substrates
Jiang, Y., Liu, H., Wang, L., Cheng, X., Yang, Y., & Ji, Y. (2013) · Optical Interference Coatings · doi:10.1364/oic.2013.wa.5
Jiang, Y., You, D., Cao, Y., Guo, W., & Tan, M. (2023) · doi:10.2139/ssrn.4496082
An Omnidirectional Reflector and Microcavity Resonatorvia the Sol-Gel Method
Chen, K. M., Sparks, A. W., Luan, H.-C., Lim, D. R., Wada, K., & Kimerling, L. C. (1999) · MRS Proceedings · doi:10.1557/proc-597-75
Surface Finish Coatings
Yilbas (2017) · Comprehensive Materials Finishing
UnresolvedCharacterization of Sputtered Aluminum Oxide Films Using Spectroscopic Ellipsometry
Lohner (2015) · Int. J. New Horiz. Phys.
UnresolvedSynthesis and Study of ZnO Thin Films Using CVD Technique For Waveguide Sensor Applications
Sulaiman (2022) · J. Nanostruct.
UnresolvedThin-Film Lithium Niobate Quantum Photonics: Review and Perspectives
Ekici (2025) · Adv. Photonics
UnresolvedWilmsen, C.W., Temkin, H., and Coldren, L.A. (2001). Vertical-Cavity Surface-Emitting Lasers: Design, Fabrication, Characterization, and Applications, Cambridge University Press.
(n.d.)
Unresolved
Cited by
Arda, L., Özuğurlu, E., & Taşçıoğlu, İ. (2026) · Crystals · doi:10.3390/cryst16050291 · Cited by 2
Metadata
- Authors
- Stîngescu, M.-L., Șopronyi, M.-A., Antohe, Ș., & Scărișoreanu, N.-D.
- Affiliations
- University of Bucharest (RO)
- National Institute for Laser, Plasma and Radiation Physics (INFLPR), Atomiștilor Street 409, 077125 Măgurele, Romania
- R&D Center for Materials and Electronic & Optoelectronic Devices (MDEO), Faculty of Physics, University of Bucharest, Atomiștilor Street 405, 077125 Măgurele, Romania
- Venue
- Crystals
- Publisher
- MDPI AG
- Published
- 2026-02-27
- Volume
- 16
- Issue
- 3
- Pages
- 164
- ISSN
- 2073-4352 (ISSN-L)
- OpenAlex
- W7131786704
- Cited by
- 2
- References
- 295
- Citations by year
- 2026: 2
- FWCI
- 2.74
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- Locations
- Crystals (publishedVersion, cc-by)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Funders
- Ministerul Cercetării și Inovării (Cod SMIS 351364, Contract nr. G 2024-85828/390008/27.11.2024, Program LAPLAS VII – contract no. 30N/2023.)
- Topics
- Physical Sciences › Materials Science › Surfaces, Coatings and Films › Optical Coatings and Gratings
- Physical Sciences › Physics and Astronomy › Atomic and Molecular Physics, and Optics › Photorefractive and Nonlinear Optics
- Physical Sciences › Materials Science › Materials Chemistry › Electronic and Structural Properties of Oxides
- Keywords
- metal oxide thin films, dielectric mirrors, distributed Bragg reflector, planar microcavities, light confinement, quality factor, passive optical components, complex oxides, lithium niobate, lithium tantalate, barium titanate, epitaxial growth, monolithic integration
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
The claim verdicts this report counts are experimental: their accuracy is not yet measured.
A language model drew the claims from the paper on 2026-10-08, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).
A second model labelled each claim on 2026-10-08 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).
Cited sources are checked with a language model’s help (gpt-6-sol).
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.