The DOI matches its Crossref record; 200 of the 200 references it cites were found in a registry or an index.
Breakthrough in the printing tactics for stimuli-responsive materials: 4D printing
Abstract
Abstract The idea of 3D printing ever since 1980’s has agitated the research domains challenging the conventional techniques with its inordinate efficiency in the utility of material, superior surface resolution and single step production which are applied in biomedical, electronics, self-healing and most prominently in biomimetic applications. However, this additive technique could not be controlled to produce intricate structure, to suppress strain controlled dimensional change, and anisotropic behavior. This complexity and inflexible design that had barricaded their dimension were vanquished by 4D printing with its dynamic structures. The fourth dimension conferred vitality to the design using stimulus to drive the transformation in smart materials (Shape Memory Effect or SME). Smart materials are environmentally sensitive materials comprising of polymers, alloys, hydrogels, ceramics and composites, activated by heat (pre-strain), water (absorption), electromagnetic radiations (Infrared, IR), magnetic field, ohmic parameters (current and voltage), solvent and pH. 4D printing attempts to counterfeit natural processes (flower blooming, leaf cirrus (tendrils), and sunflower movement) in drug delivery, wearable electronics, fashion wares, self-transmuting origami structures, sensors and other engineering applications. This review engulfs the evolution, burgeoning advancements and life cycle prediction of 4D printing with focusing on the smart materials and associated features like stimuli response along with future scope and challenges.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Additive manufacturing (3D printing): A review of materials, methods, applications and challenges
Ngo, T. D., Kashani, A., Imbalzano, G., Nguyen, K. T. Q., & Hui, D. (2018) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2018.02.012 · Cited by 8,431
A review of shape memory alloy research, applications and opportunities
Mohd Jani, J., Leary, M., Subic, A., & Gibson, M. A. (2014) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2013.11.084 · Cited by 4,078
Polymers for 3D Printing and Customized Additive Manufacturing
Ligon, S. C., Liska, R., Stampfl, J., Gurr, M., & Mülhaupt, R. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00074 · Cited by 3,741
Sydney Gladman, A., Matsumoto, E. A., Nuzzo, R. G., Mahadevan, L., & Lewis, J. A. (2016) · Nature Materials · doi:10.1038/nmat4544 · Cited by 3,027
A review on stereolithography and its applications in biomedical engineering
Melchels, F. P. W., Feijen, J., & Grijpma, D. W. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.04.050 · Cited by 2,457
Printing ferromagnetic domains for untethered fast-transforming soft materials
Kim, Y., Yuk, H., Zhao, R., Chester, S. A., & Zhao, X. (2018) · Nature · doi:10.1038/s41586-018-0185-0 · Cited by 2,183
Residual stresses in selective laser sintering and selective laser melting
Mercelis, P., & Kruth, J. (2006) · Rapid Prototyping Journal · doi:10.1108/13552540610707013 · Cited by 2,015
Behl, M., & Lendlein, A. (2007) · Materials Today · doi:10.1016/s1369-7021(07)70047-0 · Cited by 1,965
Bone tissue engineering using 3D printing
Bose, S., Vahabzadeh, S., & Bandyopadhyay, A. (2013) · Materials Today · doi:10.1016/j.mattod.2013.11.017 · Cited by 1,866
Additive manufacturing and its societal impact: a literature review
Huang, S. H., Liu, P., Mokasdar, A., & Hou, L. (2013) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-012-4558-5 · Cited by 1,862
Olakanmi, E. O., Cochrane, R. F., & Dalgarno, K. W. (2015) · Progress in Materials Science · doi:10.1016/j.pmatsci.2015.03.002 · Cited by 1,742
Direct Ink Writing of 3D Functional Materials
Lewis, J. A. (2006) · Advanced Functional Materials · doi:10.1002/adfm.200600434 · Cited by 1,740
3D printing with polymers: Challenges among expanding options and opportunities
Stansbury, J. W., & Idacavage, M. J. (2016) · Dental Materials · doi:10.1016/j.dental.2015.09.018 · Cited by 1,732
Ning, F., Cong, W., Qiu, J., Wei, J., & Wang, S. (2015) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2015.06.013 · Cited by 1,718
Printing soft matter in three dimensions
Truby, R. L., & Lewis, J. A. (2016) · Nature · doi:10.1038/nature21003 · Cited by 1,622
Shape-memory polymers and their composites: stimulus methods and applications
Leng, J., Lan, X., Liu, Y., & Du, S. (2011) · Progress in Materials Science · doi:10.1016/j.pmatsci.2011.03.001 · Cited by 1,495
Binding mechanisms in selective laser sintering and selective laser melting
Kruth, J., Mercelis, P., Van Vaerenbergh, J., Froyen, L., & Rombouts, M. (2005) · Rapid Prototyping Journal · doi:10.1108/13552540510573365 · Cited by 1,383
Fundamentals and applications of 3D printing for novel materials
Lee, J.-Y., An, J., & Chua, C. K. (2017) · Applied Materials Today · doi:10.1016/j.apmt.2017.02.004 · Cited by 1,354
Taylor, D. L., & in het Panhuis, M. (2016) · Advanced Materials · doi:10.1002/adma.201601613 · Cited by 1,340
A review on additive manufacturing of polymer-fiber composites
Parandoush, P., & Lin, D. (2017) · Composite Structures · doi:10.1016/j.compstruct.2017.08.088 · Cited by 1,270
Hager, M. D., Greil, P., Leyens, C., van der Zwaag, S., & Schubert, U. S. (2010) · Advanced Materials · doi:10.1002/adma.201003036 · Cited by 1,238
Momeni, F., M.Mehdi Hassani.N, S., Liu, X., & Ni, J. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.02.068 · Cited by 1,165
Multimaterial 4D Printing with Tailorable Shape Memory Polymers
Ge, Q., Sakhaei, A. H., Lee, H., Dunn, C. K., Fang, N. X., & Dunn, M. L. (2016) · Scientific Reports · doi:10.1038/srep31110 · Cited by 1,160
The upcoming 3D-printing revolution in microfluidics
Bhattacharjee, N., Urrios, A., Kang, S., & Folch, A. (2016) · Lab on a Chip · doi:10.1039/c6lc00163g · Cited by 1,123
Stimulus-responsive shape memory materials: a review
Sun, L., Huang, W. M., Ding, Z., Zhao, Y., Wang, C. C., Purnawali, H., & Tang, C. (2012) · Materials & Design · doi:10.1016/j.matdes.2011.04.065 · Cited by 1,105
3D printed microfluidic devices: enablers and barriers
Waheed, S., Cabot, J. M., Macdonald, N. P., Lewis, T., Guijt, R. M., Paull, B., & Breadmore, M. C. (2016) · Lab on a Chip · doi:10.1039/c6lc00284f · Cited by 1,039
A global sustainability perspective on 3D printing technologies
Gebler, M., Schoot Uiterkamp, A. J. M., & Visser, C. (2014) · Energy Policy · doi:10.1016/j.enpol.2014.08.033 · Cited by 950
3D printing of soft robotic systems
Wallin, T. J., Pikul, J., & Shepherd, R. F. (2018) · Nature Reviews Materials · doi:10.1038/s41578-018-0002-2 · Cited by 942
3D printing of smart materials: A review on recent progresses in 4D printing
Khoo, Z. X., Teoh, J. E. M., Liu, Y., Chua, C. K., Yang, S., An, J., Leong, K. F., & Yeong, W. Y. (2015) · Virtual and Physical Prototyping · doi:10.1080/17452759.2015.1097054 · Cited by 912
3D Printing of Shape Memory Polymers for Flexible Electronic Devices
Zarek, M., Layani, M., Cooperstein, I., Sachyani, E., Cohn, D., & Magdassi, S. (2016) · Advanced Materials · doi:10.1002/adma.201503132 · Cited by 903
Recent developments in the research of shape memory alloys
Otsuka, K., & Ren, X. (1999) · Intermetallics · doi:10.1016/s0966-9795(98)00070-3 · Cited by 889
Multimaterial magnetically assisted 3D printing of composite materials
Kokkinis, D., Schaffner, M., & Studart, A. R. (2015) · Nature Communications · doi:10.1038/ncomms9643 · Cited by 848
Direct Ink Writing of Three‐Dimensional Ceramic Structures
Lewis, J. A., Smay, J. E., Stuecker, J., & Cesarano, J. (2006) · Journal of the American Ceramic Society · doi:10.1111/j.1551-2916.2006.01382.x · Cited by 823
Active materials by four-dimension printing
Ge, Q., Qi, H. J., & Dunn, M. L. (2013) · Applied Physics Letters · doi:10.1063/1.4819837 · Cited by 785
Shirazi, S. F. S., Gharehkhani, S., Mehrali, M., Yarmand, H., Metselaar, H. S. C., Adib Kadri, N., & Osman, N. A. A. (2015) · Science and Technology of Advanced Materials · doi:10.1088/1468-6996/16/3/033502 · Cited by 755
Ge, Q., Dunn, C. K., Qi, H. J., & Dunn, M. L. (2014) · Smart Materials and Structures · doi:10.1088/0964-1726/23/9/094007 · Cited by 726
4D Bioprinting for Biomedical Applications
Gao, B., Yang, Q., Zhao, X., Jin, G., Ma, Y., & Xu, F. (2016) · Trends in Biotechnology · doi:10.1016/j.tibtech.2016.03.004 · Cited by 711
Jakus, A. E., Secor, E. B., Rutz, A. L., Jordan, S. W., Hersam, M. C., & Shah, R. N. (2015) · ACS Nano · doi:10.1021/acsnano.5b01179 · Cited by 710
Direct 4D Printing Via Active Composite Materials
Ding, Z., Yuan, C., Peng, X., Wang, T., Qi, H. J., & Dunn, M. L. (2017) · Science Advances · doi:10.1126/sciadv.1602890 · Cited by 692
Highly Stretchable and UV Curable Elastomers for Digital Light Processing Based 3D Printing
Patel, D. K., Sakhaei, A. H., Layani, M., Zhang, B., Ge, Q., & Magdassi, S. (2017) · Advanced Materials · doi:10.1002/adma.201606000 · Cited by 673
Design, fabrication and control of origami robots
Rus, D., & Tolley, M. T. (2018) · Nature Reviews Materials · doi:10.1038/s41578-018-0009-8 · Cited by 641
Wang, Z., Abdulla, R., Parker, B., Samanipour, R., Ghosh, S., & Kim, K. (2015) · Biofabrication · doi:10.1088/1758-5090/7/4/045009 · Cited by 633
3D printing in aerospace and its long-term sustainability
Joshi, S. C., & Sheikh, A. A. (2015) · Virtual and Physical Prototyping · doi:10.1080/17452759.2015.1111519 · Cited by 628
Selective laser sintering (SLS) 3D printing of medicines
Fina, F., Goyanes, A., Gaisford, S., & Basit, A. W. (2017) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2017.06.082 · Cited by 577
Active printed materials for complex self-evolving deformations
Raviv, D., Zhao, W., McKnelly, C., Papadopoulou, A., Kadambi, A., Shi, B., Hirsch, S., Dikovsky, D., Zyracki, M., Olguin, C., et al. (2014) · Scientific Reports · doi:10.1038/srep07422 · Cited by 568
3D Printing of Polymer Nanocomposites via Stereolithography
Manapat, J. Z., Chen, Q., Ye, P., & Advincula, R. C. (2017) · Macromolecular Materials and Engineering · doi:10.1002/mame.201600553 · Cited by 565
Vaezi, M., Chianrabutra, S., Mellor, B., & Yang, S. (2013) · Virtual and Physical Prototyping · doi:10.1080/17452759.2013.778175 · Cited by 548
Ceramic Stereolithography: Additive Manufacturing for Ceramics by Photopolymerization
Halloran, J. W. (2016) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-070115-031841 · Cited by 544
Yang, Y., Song, X., Li, X., Chen, Z., Zhou, C., Zhou, Q., & Chen, Y. (2018) · Advanced Materials · doi:10.1002/adma.201706539 · Cited by 538
A study on the residual stress during selective laser melting (SLM) of metallic powder
Liu, Y., Yang, Y., & Wang, D. (2016) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-016-8466-y · Cited by 534
Zhang, X., Pint, C. L., Lee, M. H., Schubert, B. E., Jamshidi, A., Takei, K., Ko, H., Gillies, A., Bardhan, R., Urban, J. J., et al. (2011) · Nano Letters · doi:10.1021/nl201503e · Cited by 529
4D Printing with Mechanically Robust, Thermally Actuating Hydrogels
Bakarich, S. E., Gorkin, R., Panhuis, M. I. H., & Spinks, G. M. (2015) · Macromolecular Rapid Communications · doi:10.1002/marc.201500079 · Cited by 526
3D Printing of Highly Stretchable, Shape-Memory, and Self-Healing Elastomer toward Novel 4D Printing
Kuang, X., Chen, K., Dunn, C. K., Wu, J., Li, V. C. F., & Qi, H. J. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b18265 · Cited by 523
Wei, H., Zhang, Q., Yao, Y., Liu, L., Liu, Y., & Leng, J. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b12824 · Cited by 504
Handbook of Nanomaterials for Industrial Applications
(2018) · Elsevier eBooks · doi:10.1016/c2016-0-04427-3 · Cited by 499
Morrison, R. J., Hollister, S. J., Niedner, M. F., Mahani, M. G., Park, A. H., Mehta, D. K., Ohye, R. G., & Green, G. E. (2015) · Science Translational Medicine · doi:10.1126/scitranslmed.3010825 · Cited by 498
4D Biofabrication Using Shape‐Morphing Hydrogels
Kirillova, A., Maxson, R., Stoychev, G., Gomillion, C. T., & Ionov, L. (2017) · Advanced Materials · doi:10.1002/adma.201703443 · Cited by 494
Ultrafast Digital Printing toward 4D Shape Changing Materials
Huang, L., Jiang, R., Wu, J., Song, J., Bai, H., Li, B., Zhao, Q., & Xie, T. (2017) · Advanced Materials · doi:10.1002/adma.201605390 · Cited by 490
3D Printed Photoresponsive Devices Based on Shape Memory Composites
Yang, H., Leow, W. R., Wang, T., Wang, J., Yu, J., He, K., Qi, D., Wan, C., & Chen, X. (2017) · Advanced Materials · doi:10.1002/adma.201701627 · Cited by 483
Faber, J. A., Arrieta, A. F., & Studart, A. R. (2018) · Science · doi:10.1126/science.aap7753 · Cited by 434
4D Printing of Shape Memory‐Based Personalized Endoluminal Medical Devices
Zarek, M., Mansour, N., Shapira, S., & Cohn, D. (2017) · Macromolecular Rapid Communications · doi:10.1002/marc.201600628 · Cited by 419
4D printing of polymeric materials for tissue and organ regeneration
Miao, S., Castro, N., Nowicki, M., Xia, L., Cui, H., Zhou, X., Zhu, W., Lee, S.-J., Sarkar, K., Vozzi, G., et al. (2017) · Materials Today · doi:10.1016/j.mattod.2017.06.005 · Cited by 408
Multi-shape active composites by 3D printing of digital shape memory polymers
Wu, J., Yuan, C., Ding, Z., Isakov, M., Mao, Y., Wang, T., Dunn, M. L., & Qi, H. J. (2016) · Scientific Reports · doi:10.1038/srep24224 · Cited by 399
4D Printed Actuators with Soft-Robotic Functions
López‐Valdeolivas, M., Liu, D., Broer, D. J., & Sánchez‐Somolinos, C. (2018) · Macromolecular Rapid Communications · doi:10.1002/marc.201700710 · Cited by 371
Biomimetic 3D tissue printing for soft tissue regeneration
Pati, F., Ha, D.-H., Jang, J., Han, H. H., Rhie, J.-W., & Cho, D.-W. (2015) · Biomaterials · doi:10.1016/j.biomaterials.2015.05.043 · Cited by 368
Fu, Q., Saiz, E., & Tomsia, A. P. (2011) · Acta Biomaterialia · doi:10.1016/j.actbio.2011.06.030 · Cited by 366
4D Printing Technology: A Review
Choi, J., Kwon, O.-C., Jo, W., Lee, H. J., & Moon, M.-W. (2015) · 3D Printing and Additive Manufacturing · doi:10.1089/3dp.2015.0039 · Cited by 365
3D printed reversible shape changing components with stimuli responsive materials
Mao, Y., Ding, Z., Yuan, C., Ai, S., Isakov, M., Wu, J., Wang, T., Dunn, M. L., & Qi, H. J. (2016) · Scientific Reports · doi:10.1038/srep24761 · Cited by 348
4D printing of high performance shape memory polymer using stereolithography
Choong, Y. Y. C., Maleksaeedi, S., Eng, H., Wei, J., & Su, P.-C. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.04.049 · Cited by 328
Two-Way 4D Printing: A Review on the Reversibility of 3D-Printed Shape Memory Materials
Lee, A. Y., An, J., & Chua, C. K. (2017) · Engineering · doi:10.1016/j.eng.2017.05.014 · Cited by 326
Programming 2D/3D shape-shifting with hobbyist 3D printers
van Manen, T., Janbaz, S., & Zadpoor, A. A. (2017) · Materials Horizons · doi:10.1039/c7mh00269f · Cited by 321
Liquid crystal elastomers: an introduction and review of emerging technologies
Ula, S. W., Traugutt, N. A., Volpe, R. H., Patel, R. R., Yu, K., & Yakacki, C. M. (2018) · Liquid Crystals Reviews · doi:10.1080/21680396.2018.1530155 · Cited by 316
Adaptive metamaterials by functionally graded 4D printing
Bodaghi, M., Damanpack, A. R., & Liao, W. H. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.08.069 · Cited by 302
Shape memory polymers for composites
Mu, T., Liu, L., Lan, X., Liu, Y., & Leng, J. (2018) · Composites Science and Technology · doi:10.1016/j.compscitech.2018.03.018 · Cited by 302
3D printed reversible shape changing soft actuators assisted by liquid crystal elastomers
Yuan, C., Roach, D. J., Dunn, C. K., Mu, Q., Kuang, X., Yakacki, C. M., Wang, T. J., Yu, K., & Qi, H. J. (2017) · Soft Matter · doi:10.1039/c7sm00759k · Cited by 300
Recent developments in 3D printable composite materials
Kalsoom, U., Nesterenko, P. N., & Paull, B. (2016) · RSC Advances · doi:10.1039/c6ra11334f · Cited by 294
Magnetically controlled shape memory alloys: A new class of actuator materials
Ullakko, K. (1996) · Journal of Materials Engineering and Performance · doi:10.1007/bf02649344 · Cited by 278
4D Printing of Reversible Shape Morphing Hydrogel Structures
Naficy, S., Gately, R., Gorkin, R., Xin, H., & Spinks, G. M. (2017) · Macromolecular Materials and Engineering · doi:10.1002/mame.201600212 · Cited by 276
Gaynor, A. T., Meisel, N. A., Williams, C. B., & Guest, J. K. (2014) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4028439 · Cited by 271
Self-folding with shape memory composites
Felton, S. M., Tolley, M. T., Shin, B., Onal, C. D., Demaine, E. D., Rus, D., & Wood, R. J. (2013) · Soft Matter · doi:10.1039/c3sm51003d · Cited by 269
Zhang, Q., Zhang, K., & Hu, G. (2016) · Scientific Reports · doi:10.1038/srep22431 · Cited by 269
Meng, H., & Hu, J. (2010) · Journal of Intelligent Material Systems and Structures · doi:10.1177/1045389x10369718 · Cited by 254
Revealing triple-shape memory effect by polymer bilayers
Xie, T., Xiao, X., & Cheng, Y. (2009) · Macromolecular Rapid Communications · doi:10.1002/marc.200900409 · Cited by 251
3D printing and additive manufacturing : principles and applications
Chua, C. K., & Leong, K. F. (2015) · Cited by 246
3D Printing of Lotus Root‐Like Biomimetic Materials for Cell Delivery and Tissue Regeneration
Feng, C., Zhang, W., Deng, C., Li, G., Chang, J., Zhang, Z., Jiang, X., & Wu, C. (2017) · Advanced Science · doi:10.1002/advs.201700401 · Cited by 246
Aerospace Materials and Material Technologies
Prasad, N. E., & Wanhill, R. J. H. 1. (2016) · Indian Institute of Metals series · doi:10.1007/978-981-10-2134-3 · Cited by 240
3D printed microfluidic circuitry via multijet-based additive manufacturing
Sochol, R. D., Sweet, E., Glick, C. C., Venkatesh, S., Avetisyan, A., Ekman, K. F., Raulinaitis, A., Tsai, A., Wienkers, A., Korner, K., et al. (2016) · Lab on a Chip · doi:10.1039/c5lc01389e · Cited by 237
Three-Dimensional Printing of pH-Responsive and Functional Polymers on an Affordable Desktop Printer
Nadgorny, M., Xiao, Z., Chen, C., & Connal, L. A. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b07388 · Cited by 234
4D printed thermally activated self-healing and shape memory polycaprolactone-based polymers
Invernizzi, M., Turri, S., Levi, M., & Suriano, R. (2018) · European Polymer Journal · doi:10.1016/j.eurpolymj.2018.02.023 · Cited by 229
Self-expanding/shrinking structures by 4D printing
Bodaghi, M., Damanpack, A. R., & Liao, W. H. (2016) · Smart Materials and Structures · doi:10.1088/0964-1726/25/10/105034 · Cited by 225
Yu, K., Ritchie, A., Mao, Y., Dunn, M. L., & Qi, H. J. (2015) · Procedia IUTAM · doi:10.1016/j.piutam.2014.12.021 · Cited by 220
4D Printing: History and Recent Progress
Wu, J.-J., Huang, L.-M., Zhao, Q., & Xie, T. (2018) · Chinese Journal of Polymer Science · doi:10.1007/s10118-018-2089-8 · Cited by 219
Shapeshifting: Reversible shape memory in semicrystalline elastomers
Zhou, J., Turner, S. A., Brosnan, S. M., Li, Q., Carrillo, J.-M. Y., Nykypanchuk, D., Gang, O., Ashby, V. S., Dobrynin, A. V., & Sheiko, S. S. (2014) · Macromolecules · doi:10.1021/ma4023185 · Cited by 209
A review on 3D printed smart devices for 4D printing
Lee, J., Kim, H.-C., Choi, J.-W., & Lee, I. H. (2017) · International Journal of Precision Engineering and Manufacturing-Green Technology · doi:10.1007/s40684-017-0042-x · Cited by 209
Rapidly switchable water-sensitive shape-memory cellulose/elastomer nano-composites
Zhu, Y., Hu, J., Luo, H., Young, R. J., Deng, L., Zhang, S., Fan, Y., & Ye, G. (2012) · Soft Matter · doi:10.1039/c2sm07035a · Cited by 208
Yap, Y. L., & Yeong, W. Y. (2014) · Virtual and Physical Prototyping · doi:10.1080/17452759.2014.938993 · Cited by 204
Spatial Control of Functional Response in 4D-Printed Active Metallic Structures
Ma, J., Franco, B., Tapia, G., Karayagiz, K., Johnson, L., Liu, J., Arroyave, R., Karaman, I., & Elwany, A. (2017) · Scientific Reports · doi:10.1038/srep46707 · Cited by 200
4D Printing: dawn of an emerging technology cycle
Pei, E. (2014) · Assembly Automation · doi:10.1108/aa-07-2014-062 · Cited by 199
Gore, P. M., & Kandasubramanian, B. (2018) · Journal of Materials Chemistry A · doi:10.1039/c7ta11260b · Cited by 191
Self-citation4D Printing of Complex Structures with a Fast Response Time to Magnetic Stimulus
Zhu, P., Yang, W., Wang, R., Gao, S., Li, B., & Li, Q. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b12853 · Cited by 190
Pattern Transformation of Heat-Shrinkable Polymer by Three-Dimensional (3D) Printing Technique
Zhang, Q., Yan, D., Zhang, K., & Hu, G. (2015) · Scientific Reports · doi:10.1038/srep08936 · Cited by 188
Triple shape memory polymers by 4D printing
Bodaghi, M., Damanpack, A. R., & Liao, W. H. (2018) · Smart Materials and Structures · doi:10.1088/1361-665x/aabc2a · Cited by 187
Sahoo, B. N., & Kandasubramanian, B. (2014) · RSC Advances · doi:10.1039/c4ra00506f · Cited by 184
Self-citationReview of 4D printing materials and their properties
Shin, D.-G., Kim, T.-H., & Kim, D.-E. (2017) · International Journal of Precision Engineering and Manufacturing-Green Technology · doi:10.1007/s40684-017-0040-z · Cited by 183
Anisotropic response of Ti-6Al-4V alloy fabricated by 3D printing selective laser melting
Chen, L. Y., Huang, J. C., Lin, C., Pan, C., Chen, S. Y., Yang, T.-J., Lin, D. Y., Lin, H. K., & Jang, J. S. C. (2016) · Materials Science and Engineering A · doi:10.1016/j.msea.2016.11.061 · Cited by 182
Additive manufacturing technology: the status, applications, and prospects
Bahnini, I., Rivette, M., Rechia, A., Siadat, A., & Elmesbahi, A. (2018) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-018-1932-y · Cited by 181
Fused Deposition Modeling for Unmanned Aerial Vehicles (UAVs): A Review
Klippstein, H., Diaz De Cerio Sanchez, A., Hassanin, H., Zweiri, Y., & Seneviratne, L. (2018) · Advanced Engineering Materials · doi:10.1002/adem.201700552 · Cited by 176
4D printing of net shape parts made from Ni-Mn-Ga magnetic shape-memory alloys
Caputo, M. P., Berkowitz, A. E., Armstrong, A., Müllner, P., & Solomon, C. V. (2018) · Additive Manufacturing · doi:10.1016/j.addma.2018.03.028 · Cited by 176
Leist, S. K., Gao, D., Chiou, R., & Zhou, J. (2017) · Virtual and Physical Prototyping · doi:10.1080/17452759.2017.1341815 · Cited by 173
Kempin, W., Domsta, V., Grathoff, G., Brecht, I., Semmling, B., Tillmann, S., Weitschies, W., & Seidlitz, A. (2018) · Pharmaceutical Research · doi:10.1007/s11095-018-2405-6 · Cited by 172
Technological considerations for 4D printing: An overview
Pei, E., & Loh, G. H. (2018) · Progress in Additive Manufacturing · doi:10.1007/s40964-018-0047-1 · Cited by 171
Three-Dimensional Printing of Shape Memory Composites with Epoxy-Acrylate Hybrid Photopolymer
Yu, R., Yang, X., Zhang, Y., Zhao, X., Wu, X., Zhao, T., Zhao, Y., & Huang, W. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b13531 · Cited by 168
Hierarchical Multi‐Step Folding of Polymer Bilayers
Stoychev, G., Turcaud, S., Dunlop, J. W. C., & Ionov, L. (2013) · Advanced Functional Materials · doi:10.1002/adfm.201203245 · Cited by 166
Soft Tendril-Inspired Grippers: Shape Morphing of Programmable Polymer–Paper Bilayer Composites
Wang, W., Li, C., Cho, M., & Ahn, S.-H. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b18079 · Cited by 166
4D printing – fused deposition modeling printing with thermal-responsive shape memory polymers
Ly, S. T., & Kim, J. Y. (2017) · International Journal of Precision Engineering and Manufacturing-Green Technology · doi:10.1007/s40684-017-0032-z · Cited by 163
3D Printed Flexure Hinges for Soft Monolithic Prosthetic Fingers
Mutlu, R., Alici, G., in het Panhuis, M., & Spinks, G. M. (2016) · Soft Robotics · doi:10.1089/soro.2016.0026 · Cited by 161
Shape memory behavior and recovery force of 4D printed textile functional composites
Zhang, W., Zhang, F., Lan, X., Leng, J., Wu, A. S., Bryson, T. M., Cotton, C., Gu, B., Sun, B., & Chou, T. (2018) · Composites Science and Technology · doi:10.1016/j.compscitech.2018.03.037 · Cited by 161
4D rods: 3D structures via programmable 1D composite rods
Ding, Z., Weeger, O., Qi, H. J., & Dunn, M. L. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.10.004 · Cited by 160
4D Printing of Robust Hydrogels Consisted of Agarose Nanofibers and Polyacrylamide
Guo, J., Zhang, R., Zhang, L., & Cao, X. (2018) · ACS Macro Letters · doi:10.1021/acsmacrolett.7b00957 · Cited by 159
4D printing of shape memory polyurethane via stereolithography
Zhao, T., Yu, R., Li, X., Cheng, B., Zhang, Y., Yang, X. M., Zhao, X., Zhao, Y., & Huang, W. (2018) · European Polymer Journal · doi:10.1016/j.eurpolymj.2018.02.021 · Cited by 159
Two-way shape memory effect in polymer laminates
Chen, S., Hu, J., Zhuo, H., & Zhu, Y. (2008) · Materials Letters · doi:10.1016/j.matlet.2008.05.073 · Cited by 158
Programmable morphing composites with embedded continuous fibers by 4D printing
Wang, Q., Tian, X., Huang, L., Li, D., Malakhov, A. V., & Полилов, А. Н. (2018) · Materials & Design · doi:10.1016/j.matdes.2018.06.027 · Cited by 157
Ceramic fabrication using Mask-Image-Projection-based Stereolithography integrated with tape-casting
Song, X., Chen, Y., Lee, T., Wu, S., & Cheng, L. (2015) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2015.06.022 · Cited by 153
Janbaz, S., Hedayati, R., & ZADPOOR, A. A. (2016) · Materials Horizons · doi:10.1039/c6mh00195e · Cited by 153
Ge, L., Dong, L., Wang, D., Ge, Q., & Gu, G. (2018) · Sensors and Actuators A Physical · doi:10.1016/j.sna.2018.02.041 · Cited by 153
Photo-Responsive Shape-Memory and Shape-Changing Liquid-Crystal Polymer Networks
Iqbal, D., & Samiullah, M. H. (2013) · Materials · doi:10.3390/ma6010116 · Cited by 152
Hydrophilic/Hydrophobic Composite Shape-Shifting Structures
Zhao, Z., Kuang, X., Yuan, C., Qi, H. J., & Fang, D. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b02444 · Cited by 152
Gustmann, T., Neves, A. M., Kühn, U., Gargarella, P., Kiminami, C. S., Bolfarini, C., Eckert, J., & Pauly, S. (2016) · Additive manufacturing · doi:10.1016/j.addma.2016.04.003 · Cited by 148
Intelligent materials: a review of applications in 4D printing
Li, X., Shang, J., & Wang, Z. (2017) · Assembly Automation · doi:10.1108/aa-11-2015-093 · Cited by 148
A Review of Selective Laser Melted NiTi Shape Memory Alloy
Khoo, Z. X., Liu, Y., An, J., Chua, C., Shen, Y., & Kuo, C. N. (2018) · Materials · doi:10.3390/ma11040519 · Cited by 148
Flexible Polymeric Substrates for Electronic Applications
Malik, A., & Kandasubramanian, B. (2018) · Journal of macromolecular science. Part C, Reviews in macromolecular chemistry and physics/Journal of macromolecular science. Reviews in macromolecular chemistry and physics · doi:10.1080/15583724.2018.1473424 · Cited by 148
Self-citationRecent development and biomedical applications of self-healing hydrogels
Wang, Y., Adokoh, C. K., & Narain, R. (2017) · Expert Opinion on Drug Delivery · doi:10.1080/17425247.2017.1360865 · Cited by 147
Reversible shape-shifting in polymeric materials
Zhou, J., & Sheiko, S. S. (2016) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.24014 · Cited by 144
Liu, Y., Zhang, W., Zhang, F., Lan, X., Leng, J., Liu, S., Jia, X., Cotton, C., Sun, B., Gu, B., et al. (2018) · Composites Part B Engineering · doi:10.1016/j.compositesb.2018.07.053 · Cited by 142
4D printing shape memory polymers for dynamic jewellery and fashionwear
Zarek, M., Layani, M., Eliazar, S., Mansour, N., Cooperstein, I., Shukrun, E., Szlar, A., Cohn, D., & Magdassi, S. (2016) · Virtual and Physical Prototyping · doi:10.1080/17452759.2016.1244085 · Cited by 134
Lendlein, A., & Shastri, V. P. (2010) · Advanced Materials · doi:10.1002/adma.201002520 · Cited by 133
Review of Progress in Shape Memory Epoxies and Their Composites
Karger-Kocsis, J., & Kéki, S. (2017) · Polymers · doi:10.3390/polym10010034 · Cited by 133
Shape memory polymer hexachiral auxetic structures with tunable stiffness
Rossiter, J. M., TAKASHIMA, K., Scarpa, F. L., Walters, P., & Mukai, T. (2014) · Smart Materials and Structures · doi:10.1088/0964-1726/23/4/045007 · Cited by 131
BASIC PROPERTIES OF MAGNETIC SHAPE MEMORY ACTUATORS
Tellinen, J., Suorsa, I., Jääskeläinen, A., Aaltio, I., & Ullakko, K. (2002) · Cited by 130
Zolfagharian, A., Kaynak, A., Khoo, S., & Kouzani, A. Z. (2018) · Sensors and Actuators A Physical · doi:10.1016/j.sna.2018.03.034 · Cited by 129
3D Printing of Biocompatible Supramolecular Polymers and their Composites
Hart, L. R., Li, S., Sturgess, C., et al. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b10471 · Cited by 120
3D-Printed Self-Folding Electronics
Sundaram, S., Kim, D. S., Baldo, M. A., Hayward, R. C., & Matusik, W. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b10443 · Cited by 120
Hu, G. F., Damanpack, A. R., Bodaghi, M., & Liao, W. H. (2017) · Smart Materials and Structures · doi:10.1088/1361-665x/aa95ec · Cited by 119
Hua, D., Zhang, X., Ji, Z., Yan, C., Yu, B., Li, Y., Wang, X., & Zhou, F. (2018) · Journal of Materials Chemistry C · doi:10.1039/c7tc05710e · Cited by 119
Direct ink writing of highly bioactive glasses
Nommeots‐Nomm, A., Lee, P. D., & Jones, J. R. (2017) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2017.08.006 · Cited by 117
Tang, Z., Gao, Z., Jia, S., Wang, F., & Wang, Y. (2017) · Advanced Science · doi:10.1002/advs.201600437 · Cited by 101
Scheithauer, U., Weingarten, S., Johne, R., Schwarzer, E., Abel, J., Richter, H., Moritz, T., & Michaelis, A. (2017) · Materials · doi:10.3390/ma10121368 · Cited by 100
Hierarchically self-morphing structure through 4D printing
Teoh, J. E. M., An, J., Chua, C. K., Lv, M. Y., Krishnasamy, V., & Liu, Y. (2016) · Virtual and Physical Prototyping · doi:10.1080/17452759.2016.1272174 · Cited by 98
3D printing individualized triboelectric nanogenerator with macro-pattern
Qiao, H., Zhang, Y., Huang, Z., Wang, Y., Li, D., & Zhou, H. (2018) · Nano Energy · doi:10.1016/j.nanoen.2018.04.071 · Cited by 98
Marco, C. D., Pané, S., & Nelson, B. J. (2018) · Science Robotics · doi:10.1126/scirobotics.aau0449 · Cited by 98
Plant leaf-mimetic smart wind turbine blades by 4D printing
Momeni, F., Sabzpoushan, S., Valizadeh, R., Morad, M. R., Liu, X., & Ni, J. (2018) · Renewable Energy · doi:10.1016/j.renene.2018.05.095 · Cited by 98
4D printing of a self-morphing polymer driven by a swellable guest medium
Su, J., Tao, X., Deng, H., Zhang, C., Jiang, S., Lin, Y., & Lin, J. (2017) · Soft Matter · doi:10.1039/c7sm01796k · Cited by 97
Optical 3D printing: bridging the gaps in the mesoscale
Jonušauskas, L., Juodkazis, S., & Malinauskas, M. (2018) · Journal of Optics · doi:10.1088/2040-8986/aab3fe · Cited by 96
Kwok, T.-H., Wang, C. C. L., Deng, D., Zhang, Y., & Chen, Y. (2015) · Journal of Mechanical Design · doi:10.1115/1.4031023 · Cited by 93
Zhao, Z., Peng, F., Cavicchi, K. A., Çakmak, M., Weiss, R. A., & Vogt, B. D. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b07816 · Cited by 93
Shen, F., Yuan, S., Guo, Y., Zhao, B. Y., Bai, J., Qwamizadeh, M., Chua, C. K., Wei, J., & Zhou, K. (2016) · International Journal of Applied Mechanics · doi:10.1142/s1758825116400068 · Cited by 92
Current developments in multifunctional smart materials for 3D/4D bioprinting
Castro, N. J., Meinert, C., Levett, P. A., & Hutmacher, D. W. (2017) · Current Opinion in Biomedical Engineering · doi:10.1016/j.cobme.2017.04.002 · Cited by 92
Yang, H., Liu, J., Wang, Z., Guo, L., Keller, P., Lin, B., Sun, Y., & Zhang, X. (2015) · Chemical Communications · doi:10.1039/c5cc02599k · Cited by 90
4D printing – revolution or fad?
Pei, E. (2014) · Assembly Automation · doi:10.1108/aa-02-2014-014 · Cited by 89
From 3D to 4D printing—Design, material and fabrication for multi-functional multi-materials
Khare, V., Sonkaria, S., Lee, G.-Y., Ahn, S.-H., & Chu, W.-S. (2017) · International Journal of Precision Engineering and Manufacturing-Green Technology · doi:10.1007/s40684-017-0035-9 · Cited by 88
Multifunctional Hybrid Nanocomposites with Magnetically Controlled Reversible Shape–Memory Effect
Razzaq, M. Y., Behl, M., Kratz, K. L., & Lendlein, A. (2013) · Advanced Materials · doi:10.1002/adma.201302485 · Cited by 88
Mu, Q., Dunn, C. K., Wang, L., Dunn, M. L., Qi, H. J., & Wang, T. (2017) · Smart Materials and Structures · doi:10.1088/1361-665x/aa5cca · Cited by 84
Sakai, S., Kamei, H., Mori, T., Hotta, T., Ohi, H., Nakahata, M., & Taya, M. (2018) · Biomacromolecules · doi:10.1021/acs.biomac.7b01827 · Cited by 84
Shape‐Memory Nanocomposites with Magnetically Adjustable Apparent Switching Temperatures
Kumar, U. N., Kratz, K. L., Heuchel, M., Behl, M., & Lendlein, A. (2011) · Advanced Materials · doi:10.1002/adma.201102251 · Cited by 81
3D printing of an interpenetrating network hydrogel material with tunable viscoelastic properties
Bootsma, K., Fitzgerald, M. M., Free, B., Dimbath, E. D., Conjerti, J., Reese, G. J., Konkolewicz, D., Berberich, J. A., & Sparks, J. L. (2016) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2016.07.020 · Cited by 79
Nature-inspired smart solar concentrators by 4D printing
Momeni, F., & Ni, J. (2018) · Renewable Energy · doi:10.1016/j.renene.2018.01.062 · Cited by 79
3D printing of shape memory hydrogels with tunable mechanical properties
Shiblee, M. N. I., Ahmed, K., Khosla, A., Kawakami, M., & Furukawa, H. (2018) · Soft Matter · doi:10.1039/c8sm01156g · Cited by 76
Curing characteristics of shape memory polymers in 3D projection and laser stereolithography
Choong, Y. Y. C., Maleksaeedi, S., Eng, H., Su, P., & Wei, J. (2016) · Virtual and Physical Prototyping · doi:10.1080/17452759.2016.1254845 · Cited by 75
Gioumouxouzis, C. I., Chatzitaki, A., Karavasili, C., Katsamenis, O. L., Tzetzis, D., Mystiridou, E., Bouropoulos, N., & Fatouros, D. G. (2018) · AAPS PharmSciTech · doi:10.1208/s12249-018-1084-2 · Cited by 75
4D printed porous radiopaque shape memory polyurethane for endovascular embolization
Kashyap, D., Kumar, P. K., & Kanagaraj, S. (2018) · Additive manufacturing · doi:10.1016/j.addma.2018.04.009 · Cited by 70
3D Printed Silicones with Shape Memory
Wu, A. S., Small, W., Bryson, T. M., Cheng, E., Metz, T. R., Schulze, S. E., Duoss, E. B., & Wilson, T. S. (2017) · Scientific Reports · doi:10.1038/s41598-017-04663-z · Cited by 66
Photomechanical bending mechanics of polydomain azobenzene liquid crystal polymer network films
Cheng, L., Torres, Y., Lee, K. M., McClung, A. J. W., Baur, J. W., White, T. J., & Oates, W. S. (2012) · Journal of Applied Physics · doi:10.1063/1.4729771 · Cited by 60
A study of 4D printing and functionally graded additive manufacturing
Pei, E., Loh, G. H., Harrison, D. J., Almeida, H. A., Monzón, M., & Paz, R. (2017) · Assembly Automation · doi:10.1108/aa-01-2017-012 · Cited by 60
Rosales, C. A. G., Duarte, M. F. G., Kim, H., Chavez, L. A., Hodges, D. R., Mandal, P., Lin, Y., & Tseng, T.-L. (2018) · Materials Research Express · doi:10.1088/2053-1591/aacd53 · Cited by 58
Design and 4D Printing of Cross-Folded Origami Structures: A Preliminary Investigation
Teoh, J. E. M., An, J., Feng, X., Zhao, Y., Chua, C., & Liu, Y. (2018) · Materials · doi:10.3390/ma11030376 · Cited by 54
Magnetodielectric Microwave Radiation Absorbent Materials and Their Polymer Composites
Magisetty, R., Shukla, A., & Kandasubramanian, B. (2018) · Journal of Electronic Materials · doi:10.1007/s11664-018-6580-3 · Cited by 54
Self-citationBasavaraj, C. K., & Mahesh, V. (2016) · IOP Conference Series Materials Science and Engineering · doi:10.1088/1757-899x/149/1/012035 · Cited by 53
Shape memory/change effect in a double network nanocomposite tough hydrogel
Zhang, J., Huang, W., Gao, G., Fu, J., Zhou, Y., Salvekar, A. V., Venkatraman, S. S., Wong, Y. S., Tay, K. H., & Birch, W. R. (2014) · European Polymer Journal · doi:10.1016/j.eurpolymj.2014.06.006 · Cited by 50
Biomedical applications of shape-memory polymers: how practically useful are they?
Wong, Y., Kong, J. F., Widjaja, L. K., & Venkatraman, S. S. (2014) · Science China Chemistry · doi:10.1007/s11426-013-5061-z · Cited by 50
Effective software solutions for 4D printing: A review and proposal
Chung, S., Song, S. E., & Cho, Y. T. (2017) · International Journal of Precision Engineering and Manufacturing-Green Technology · doi:10.1007/s40684-017-0041-y · Cited by 49
Deoray, N., & Kandasubramanian, B. (2017) · Polymer-Plastics Technology and Engineering · doi:10.1080/03602559.2017.1354226 · Cited by 46
Self-citation3D–4D Printed Objects: New Bioactive Material Opportunities
Mandon, C. A., Blum, L. J., & Marquette, C. A. (2017) · Micromachines · doi:10.3390/mi8040102 · Cited by 45
Review on 3D Prototyping of Damage Tolerant Interdigitating Brick Arrays of Nacre
Yadav, R., Naebe, M., Wang, X., & Kandasubramanian, B. (2017) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.7b01679 · Cited by 45
Self-citationGore, P. M., Zachariah, S., Gupta, P., & Kandasubramanian, B. (2016) · RSC Advances · doi:10.1039/c6ra16781k · Cited by 43
Self-citationBionic Prototyping of Honeycomb Patterned Polymer Composite and Its Engineering Application
Korde, J. M., Shaikh, M., & Kandasubramanian, B. (2018) · Polymer-Plastics Technology and Engineering · doi:10.1080/03602559.2018.1434667 · Cited by 42
Self-citationCapillary Origami Inspired Fabrication of Complex 3D Hydrogel Constructs
Li, M., Yang, Q., Liu, H., Qiu, M., Lu, T. J., & Xu, F. (2016) · Small · doi:10.1002/smll.201601147 · Cited by 40
Electronic properties of Poly(1,6-heptadiynes) electrospun fibrous non-woven mat
Magisetty, R., Kumar, P., Gore, P. M., Ganivada, M. N., Shukla, A., Kandasubramanian, B., & Shunmugam, R. (2018) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2018.11.020 · Cited by 39
Self-citationExperimental analysis of heterogeneous shape recovery in 4d printed honeycomb structures
Abuzaid, W. Z., Alkhader, M., & Omari, M. (2018) · Polymer Testing · doi:10.1016/j.polymertesting.2018.03.050 · Cited by 38
Lightweight parametric design optimization for 4D printed parts
Paz, R., Pei, E., Monzón, M., Ortega, F., & Suárez, L. (2017) · Integrated Computer-Aided Engineering · doi:10.3233/ica-170543 · Cited by 32
Belsey, K. E., Parry, A. V. S., Rumens, C. V., Ziai, M. A., Yeates, S. G., Batchelor, J. C., & Holder, S. J. (2017) · Journal of Materials Chemistry C · doi:10.1039/c6tc05509e · Cited by 28
Magisetty, R., Shukla, A., & Kandasubramanian, B. (2018) · Journal of Electronic Materials · doi:10.1007/s11664-018-6452-x · Cited by 26
Self-citationChavez, F. J. A., Siqueiros, J. G., Carrete, I. A., Delgado, I. L., Ritter, G. W., & Roberson, D. A. (2018) · Virtual and Physical Prototyping · doi:10.1080/17452759.2018.1550694 · Cited by 26
Mishra, N., & Kandasubramanian, B. (2017) · Polymer-Plastics Technology and Engineering · doi:10.1080/03602559.2017.1326139 · Cited by 25
Self-citationFour-Dimensional (4D) Printing: Applying Soft Adaptive Materials to Additive Manufacturing
Li, Z., & Loh, X. J. (2017) · Journal of Molecular and Engineering Materials · doi:10.1142/s2251237317400032 · Cited by 20
Deng, D., Kwok, T.-H., & Chen, Y. (2017) · Journal of Mechanical Design · doi:10.1115/1.4036996 · Cited by 19
4D Origami by Smart Embroidery
Stoychev, G. V., Razavi, M. J., Wang, X., & Ionov, L. (2017) · Macromolecular Rapid Communications · doi:10.1002/marc.201700213 · Cited by 18
Epoxy Resin Composite Bilayers with Triple‐Shape Memory Effect
Li, X., Zhu, Y., Dong, Y., Liu, M., Ni, Q., & Fu, Y. (2015) · Journal of Nanomaterials · doi:10.1155/2015/475316 · Cited by 15
GDFE: Geometry-Driven Finite Element for Four-Dimensional Printing
Kwok, T.-H., & Chen, Y. (2017) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4037429 · Cited by 14
Geometry-Driven Finite Element for Four-Dimensional Printing
Kwok, T.-H. (2017) · ASME International Manufacturing Science and Engineering Conference (MSEC) · doi:10.1115/msec2017-2621 · Cited by 9
Rolling of 3D Printed Dual‐Layer Beam into a Cylinder by Ethanol Absorption
Choi, W., Kim, T., & Lee, Y. (2018) · Macromolecular Materials and Engineering · doi:10.1002/mame.201700675 · Cited by 8
Cited by
Review of alginate-based hydrogel bioprinting for application in tissue engineering
Rastogi, P., & Kandasubramanian, B. (2019) · Biofabrication · doi:10.1088/1758-5090/ab331e · Cited by 564
Self-citationAdditive Manufacturing of Polymer Materials: Progress, Promise and Challenges
Saleh Alghamdi, S., John, S., Roy Choudhury, N., & Dutta, N. K. (2021) · Polymers · doi:10.3390/polym13050753 · Cited by 469
Advancements in nanofibers for wound dressing: A review
Ambekar, R. S., & Kandasubramanian, B. (2019) · European Polymer Journal · doi:10.1016/j.eurpolymj.2019.05.020 · Cited by 447
Self-citation3D and 4D Printing of Polymers for Tissue Engineering Applications
Tamay, D. G., Dursun Usal, T., Alagoz, A. S., Yucel, D., Hasirci, N., & Hasirci, V. (2019) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2019.00164 · Cited by 417
Direct Ink Writing Based 4D Printing of Materials and Their Applications
Wan, X., Luo, L., Liu, Y., & Leng, J. (2020) · Advanced Science · doi:10.1002/advs.202001000 · Cited by 337
Metadata
- Authors
- Rastogi, P., & Kandasubramanian, B.
- Venue
- Chemical Engineering Journal
- Publisher
- Elsevier BV
- Published
- 2019-06
- Volume
- 366
- Pages
- 264-304
- ISSN
- 1385-8947 (ISSN-L)
- OpenAlex
- W2912669267
- Cited by
- 267
- References
- 200
- FWCI
- 18.70
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.