The DOI matches its Crossref record; 309 of the 309 references it cites were found in a registry or an index.
Revolutionizing manufacturing: A comprehensive overview of additive manufacturing processes, materials, developments, and challenges
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
1 retracted
Jungebluth, P., Alici, E., Baiguera, S., Blomberg, P., Bozóky, B., Crowley, C., Einarsson, O., Gudbjartsson, T., Le Guyader, S., Henriksson, G., et al. (2011) · The Lancet · doi:10.1016/s0140-6736(11)61715-7 · Cited by 424
RetractedAdditive manufacturing of metallic components – Process, structure and properties
DebRoy, T., Wei, H. L., Zuback, J. S., Mukherjee, T., Elmer, J. W., Milewski, J. O., Beese, A. M., Wilson-Heid, A., De, A., & Zhang, W. (2018) · Progress in Materials Science · doi:10.1016/j.pmatsci.2017.10.001 · Cited by 8,805
Additive manufacturing (3D printing): A review of materials, methods, applications and challenges
Ngo, T. D., Kashani, A., Imbalzano, G., Nguyen, K. T. Q., & Hui, D. (2018) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2018.02.012 · Cited by 8,431
3D bioprinting of tissues and organs
Murphy, S. V., & Atala, A. (2014) · Nature Biotechnology · doi:10.1038/nbt.2958 · Cited by 7,034
Additive manufacturing of metals
Herzog, D., Seyda, V., Wycisk, E., & Emmelmann, C. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.07.019 · Cited by 4,759
Polymers for 3D Printing and Customized Additive Manufacturing
Ligon, S. C., Liska, R., Stampfl, J., Gurr, M., & Mülhaupt, R. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00074 · Cited by 3,741
Laser additive manufacturing of metallic components: materials, processes and mechanisms
Gu, D. D., Meiners, W., Wissenbach, K., & Poprawe, R. (2012) · International Materials Reviews · doi:10.1179/1743280411y.0000000014 · Cited by 3,197
The status, challenges, and future of additive manufacturing in engineering
Gao, W., Zhang, Y., Ramanujan, D., Ramani, K., Chen, Y., Williams, C. B., Wang, C. C. L., Shin, Y. C., Zhang, S., & Zavattieri, P. D. (2015) · Computer-Aided Design · doi:10.1016/j.cad.2015.04.001 · Cited by 2,631
A 3D bioprinting system to produce human-scale tissue constructs with structural integrity
Kang, H.-W., Lee, S. J., Ko, I. K., Kengla, C., Yoo, J. J., & Atala, A. (2016) · Nature Biotechnology · doi:10.1038/nbt.3413 · Cited by 2,622
The metallurgy and processing science of metal additive manufacturing
Sames, W. J., List, F. A., Pannala, S., Dehoff, R. R., & Babu, S. S. (2016) · International Materials Reviews · doi:10.1080/09506608.2015.1116649 · Cited by 2,529
Additive manufacturing of Ti6Al4V alloy: A review
Liu, S., & Shin, Y. C. (2019) · Materials & Design · doi:10.1016/j.matdes.2018.107552 · Cited by 2,472
Metal additive manufacturing in aerospace: A review
Blakey-Milner, B., Gradl, P., Snedden, G., Brooks, M., Pitot, J., Lopez, E., Leary, M., Berto, F., & du Plessis, A. (2021) · Materials & Design · doi:10.1016/j.matdes.2021.110008 · Cited by 2,263
Additive manufacturing: scientific and technological challenges, market uptake and opportunities
Tofail, S. A. M., Koumoulos, E. P., Bandyopadhyay, A., Bose, S., O’Donoghue, L., & Charitidis, C. (2018) · Materials Today · doi:10.1016/j.mattod.2017.07.001 · Cited by 2,136
Additive manufacturing and sustainability: an exploratory study of the advantages and challenges
Ford, S., & Despeisse, M. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2016.04.150 · Cited by 1,889
The rise of 3-D printing: The advantages of additive manufacturing over traditional manufacturing
Attaran, M. (2017) · Business Horizons · doi:10.1016/j.bushor.2017.05.011 · Cited by 1,822
Ding, D., Pan, Z., Cuiuri, D., & Li, H. (2015) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-015-7077-3 · Cited by 1,648
Review of in-situ process monitoring and in-situ metrology for metal additive manufacturing
Everton, S. K., Hirsch, M., Stravroulakis, P., Leach, R. K., & Clare, A. T. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.01.099 · Cited by 1,469
A review of melt extrusion additive manufacturing processes: I. Process design and modeling
N. Turner, B., Strong, R., & A. Gold, S. (2014) · Rapid Prototyping Journal · doi:10.1108/rpj-01-2013-0012 · Cited by 1,450
Kok, Y., Tan, X. P., Wang, P., Nai, M. L. S., Loh, N. H., Liu, E., & Tor, S. B. (2018) · Materials & Design · doi:10.1016/j.matdes.2017.11.021 · Cited by 1,447
Multivascular networks and functional intravascular topologies within biocompatible hydrogels
Grigoryan, B., Paulsen, S. J., Corbett, D. C., Sazer, D. W., Fortin, C. L., Zaita, A. J., Greenfield, P. T., Calafat, N. J., Gounley, J. P., Ta, A. H., et al. (2019) · Science · doi:10.1126/science.aav9750 · Cited by 1,396
Svetlizky, D., Das, M., Zheng, B., Vyatskikh, A. L., Bose, S., Bandyopadhyay, A., Schoenung, J. M., Lavernia, E. J., & Eliaz, N. (2021) · Materials Today · doi:10.1016/j.mattod.2021.03.020 · Cited by 1,371
A review on 3D micro-additive manufacturing technologies
Vaezi, M., Seitz, H., & Yang, S. (2013) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-012-4605-2 · Cited by 1,293
A review on additive manufacturing of polymer-fiber composites
Parandoush, P., & Lin, D. (2017) · Composite Structures · doi:10.1016/j.compstruct.2017.08.088 · Cited by 1,270
King, W. E., Anderson, A. T., Ferencz, R. M., Hodge, N. E., Kamath, C., Khairallah, S. A., & Rubenchik, A. M. (2015) · Applied Physics Reviews · doi:10.1063/1.4937809 · Cited by 1,258
Photo-curing 3D printing technique and its challenges
Quan, H., Zhang, T., Xu, H., Luo, S., Nie, J., & Zhu, X. (2020) · Bioactive Materials · doi:10.1016/j.bioactmat.2019.12.003 · Cited by 1,106
3D Printing of Personalized Thick and Perfusable Cardiac Patches and Hearts
Noor, N., Shapira, A., Edri, R., Gal, I., Wertheim, L., & Dvir, T. (2019) · Advanced Science · doi:10.1002/advs.201900344 · Cited by 1,042
Mechanical behavior of additive manufactured, powder-bed laser-fused materials
Mower, T. M., & Long, M. J. (2016) · Materials Science and Engineering: A · doi:10.1016/j.msea.2015.10.068 · Cited by 1,001
The Role of Additive Manufacturing in the Era of Industry 4.0
Dilberoglu, U. M., Gharehpapagh, B., Yaman, U., & Dolen, M. (2017) · Procedia Manufacturing · doi:10.1016/j.promfg.2017.07.148 · Cited by 1,000
Additive Manufacturing of Ceramic‐Based Materials
Travitzky, N., Bonet, A., Dermeik, B., Fey, T., Filbert‐Demut, I., Schlier, L., Schlordt, T., & Greil, P. (2014) · Advanced Engineering Materials · doi:10.1002/adem.201400097 · Cited by 878
Additive manufacturing of advanced ceramic materials
Lakhdar, Y., Tuck, C., Binner, J., Terry, A., & Goodridge, R. (2021) · Progress in Materials Science · doi:10.1016/j.pmatsci.2020.100736 · Cited by 857
Buchanan, C., & Gardner, L. (2019) · Engineering Structures · doi:10.1016/j.engstruct.2018.11.045 · Cited by 826
From rapid prototyping to home fabrication: How 3D printing is changing business model innovation
Rayna, T., & Striukova, L. (2016) · Technological Forecasting and Social Change · doi:10.1016/j.techfore.2015.07.023 · Cited by 816
Nazir, A., Gokcekaya, O., Md Masum Billah, K., Ertugrul, O., Jiang, J., Sun, J., & Hussain, S. (2023) · Materials & Design · doi:10.1016/j.matdes.2023.111661 · Cited by 773
Vafadar, A., Guzzomi, F., Rassau, A., & Hayward, K. (2021) · Applied Sciences · doi:10.3390/app11031213 · Cited by 748
3D printing – A review of processes, materials and applications in industry 4.0
Jandyal, A., Chaturvedi, I., Wazir, I., Raina, A., & Ul Haq, M. I. (2022) · Sustainable Operations and Computers · doi:10.1016/j.susoc.2021.09.004 · Cited by 739
Plocher, J., & Panesar, A. (2019) · Materials & Design · doi:10.1016/j.matdes.2019.108164 · Cited by 669
Multi‐Material 3D and 4D Printing: A Survey
Rafiee, M., Farahani, R. D., & Therriault, D. (2020) · Advanced Science · doi:10.1002/advs.201902307 · Cited by 662
Carroll, B. E., Otis, R., Borgonia, J. P., Suh, J.-O., Dillon, R. P., Shapiro, A. A., Hofmann, D. C., Liu, Z., & Beese, A. M. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.02.019 · Cited by 657
Additive manufacturing of steels: a review of achievements and challenges
Haghdadi, N., Laleh, M., Moyle, M., & Primig, S. (2021) · Journal of Materials Science · doi:10.1007/s10853-020-05109-0 · Cited by 622
Cold spray additive manufacturing and repair: Fundamentals and applications
Yin, S., Cavaliere, P., Aldwell, B., Jenkins, R., Liao, H., Li, W., & Lupoi, R. (2018) · Additive Manufacturing · doi:10.1016/j.addma.2018.04.017 · Cited by 599
Daminabo, S. C., Goel, S., Grammatikos, S. A., Nezhad, H. Y., & Thakur, V. K. (2020) · Materials Today Chemistry · doi:10.1016/j.mtchem.2020.100248 · Cited by 567
Additively manufactured carbon fiber-reinforced composites: State of the art and perspective
van de Werken, N., Tekinalp, H., Khanbolouki, P., Ozcan, S., Williams, A., & Tehrani, M. (2020) · Additive Manufacturing · doi:10.1016/j.addma.2019.100962 · Cited by 566
Advances in 3D printing of thermoplastic polymer composites and nanocomposites
Valino, A. D., Dizon, J. R. C., Espera, A. H., Chen, Q., Messman, J., & Advincula, R. C. (2019) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2019.101162 · Cited by 565
3D printing of polymer composites: Materials, processes, and applications
Park, S., Shou, W., Makatura, L., Matusik, W., & Fu, K. (. (2022) · Matter · doi:10.1016/j.matt.2021.10.018 · Cited by 562
An overview of modern metal additive manufacturing technology
Armstrong, M., Mehrabi, H., & Naveed, N. (2022) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2022.10.060 · Cited by 549
Wilson, J. M., Piya, C., Shin, Y. C., Zhao, F., & Ramani, K. (2014) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2014.05.084 · Cited by 543
Overview of Current Additive Manufacturing Technologies and Selected Applications
Horn, T. J., & Harrysson, O. L. A. (2012) · Science Progress · doi:10.3184/003685012x13420984463047 · Cited by 542
Heat treatment for metal additive manufacturing
Laleh, M., Sadeghi, E., Revilla, R. I., Chao, Q., Haghdadi, N., Hughes, A. E., Xu, W., De Graeve, I., Qian, M., Gibson, I., et al. (2023) · Progress in Materials Science · doi:10.1016/j.pmatsci.2022.101051 · Cited by 538
Application of Directed Energy Deposition-Based Additive Manufacturing in Repair
Saboori, A., Aversa, A., Marchese, G., Biamino, S., Lombardi, M., & Fino, P. (2019) · Applied Sciences · doi:10.3390/app9163316 · Cited by 537
Mostafaei, A., Ghiaasiaan, R., Ho, I.-T., Strayer, S., Chang, K.-C., Shamsaei, N., Shao, S., Paul, S., Yeh, A.-C., Tin, S., et al. (2023) · Progress in Materials Science · doi:10.1016/j.pmatsci.2023.101108 · Cited by 531
Additive Manufacturing of Metallic Materials: A Review
Zhang, Y., Wu, L., Guo, X., Kane, S., Deng, Y., Jung, Y.-G., Lee, J.-H., & Zhang, J. (2018) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-017-2747-y · Cited by 521
3D printing of highly stretchable hydrogel with diverse UV curable polymers
Ge, Q., Chen, Z., Cheng, J., Zhang, B., Zhang, Y.-F., Li, H., He, X., Yuan, C., Liu, J., Magdassi, S., et al. (2021) · Science Advances · doi:10.1126/sciadv.aba4261 · Cited by 518
Narasimharaju, S. R., Zeng, W., See, T. L., Zhu, Z., Scott, P., Jiang, X., & Lou, S. (2022) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2021.12.033 · Cited by 508
Additive Manufacturing Processes in Medical Applications
Salmi, M. (2021) · Materials · doi:10.3390/ma14010191 · Cited by 500
Additive manufacturing — A review of 4D printing and future applications
Mitchell, A., Lafont, U., Hołyńska, M., & Semprimoschnig, C. (2018) · Additive Manufacturing · doi:10.1016/j.addma.2018.10.038 · Cited by 494
Composites by rapid prototyping technology
Kumar, S., & Kruth, J.-P. (2010) · Materials & Design · doi:10.1016/j.matdes.2009.07.045 · Cited by 463
A review on wire arc additive manufacturing: Monitoring, control and a framework of automated system
Xia, C., Pan, Z., Polden, J., Li, H., Xu, Y., Chen, S., & Zhang, Y. (2020) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2020.08.008 · Cited by 460
An overview of functionally graded additive manufacturing
Loh, G. H., Pei, E., Harrison, D., & Monzón, M. D. (2018) · Additive Manufacturing · doi:10.1016/j.addma.2018.06.023 · Cited by 459
Particle-bed 3D printing in concrete construction – Possibilities and challenges
Lowke, D., Dini, E., Perrot, A., Weger, D., Gehlen, C., & Dillenburger, B. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2018.05.018 · Cited by 447
3D printing of layered brain-like structures using peptide modified gellan gum substrates
Lozano, R., Stevens, L., Thompson, B. C., Gilmore, K. J., Gorkin, R., Stewart, E. M., in het Panhuis, M., Romero-Ortega, M., & Wallace, G. G. (2015) · Biomaterials · doi:10.1016/j.biomaterials.2015.07.022 · Cited by 445
Wu, Y., Fang, J., Wu, C., Li, C., Sun, G., & Li, Q. (2023) · International Journal of Mechanical Sciences · doi:10.1016/j.ijmecsci.2023.108102 · Cited by 440
Sustainability of additive manufacturing: An overview on its energy demand and environmental impact
Peng, T., Kellens, K., Tang, R., Chen, C., & Chen, G. (2018) · Additive Manufacturing · doi:10.1016/j.addma.2018.04.022 · Cited by 426
Shape-shifting structured lattices via multimaterial 4D printing
Boley, J. W., van Rees, W. M., Lissandrello, C., Horenstein, M. N., Truby, R. L., Kotikian, A., Lewis, J. A., & Mahadevan, L. (2019) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1908806116 · Cited by 420
Additive manufacturing in unmanned aerial vehicles (UAVs): Challenges and potential
Goh, G. D., Agarwala, S., Goh, G. L., Dikshit, V., Sing, S. L., & Yeong, W. Y. (2017) · Aerospace Science and Technology · doi:10.1016/j.ast.2016.12.019 · Cited by 413
Oropallo, W., & Piegl, L. A. (2015) · Engineering With Computers · doi:10.1007/s00366-015-0407-0 · Cited by 406
Additive manufacturing for energy: A review
Sun, C., Wang, Y., McMurtrey, M. D., Jerred, N. D., Liou, F., & Li, J. (2021) · Applied Energy · doi:10.1016/j.apenergy.2020.116041 · Cited by 405
Parthasarathy, J., Starly, B., & Raman, S. (2011) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2011.01.004 · Cited by 392
3D printing technology; methods, biomedical applications, future opportunities and trends
Bozkurt, Y., & Karayel, E. (2021) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2021.07.050 · Cited by 384
Metal additive manufacturing: Technology, metallurgy and modelling
Cooke, S., Ahmadi, K., Willerth, S., & Herring, R. (2020) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2020.07.025 · Cited by 378
Methods and materials for additive manufacturing: A critical review on advancements and challenges
Bhuvanesh Kumar, M., & Sathiya, P. (2021) · Thin-Walled Structures · doi:10.1016/j.tws.2020.107228 · Cited by 372
3D printing: Principles and pharmaceutical applications of selective laser sintering
Awad, A., Fina, F., Goyanes, A., Gaisford, S., & Basit, A. W. (2020) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2020.119594 · Cited by 371
Recent progress on additive manufacturing of multi-material structures with laser powder bed fusion
Wang, D., Liu, L., Deng, G., Deng, C., Bai, Y., Yang, Y., Wu, W., Chen, J., Liu, Y., Wang, Y., et al. (2022) · Virtual and Physical Prototyping · doi:10.1080/17452759.2022.2028343 · Cited by 363
Additive manufacturing: expanding 3D printing horizon in industry 4.0
Prashar, G., Vasudev, H., & Bhuddhi, D. (2022) · International Journal on Interactive Design and Manufacturing (IJIDeM) · doi:10.1007/s12008-022-00956-4 · Cited by 348
Alloy design via additive manufacturing: Advantages, challenges, applications and perspectives
Bandyopadhyay, A., Traxel, K. D., Lang, M., Juhasz, M., Eliaz, N., & Bose, S. (2022) · Materials Today · doi:10.1016/j.mattod.2021.11.026 · Cited by 347
Kumar, S., Gopi, T., Harikeerthana, N., Gupta, M. K., Gaur, V., Krolczyk, G. M., & Wu, C. (2023) · Journal of Intelligent Manufacturing · doi:10.1007/s10845-022-02029-5 · Cited by 328
Deep reinforcement learning in smart manufacturing: A review and prospects
Li, C., Zheng, P., Yin, Y., Wang, B., & Wang, L. (2023) · CIRP Journal of Manufacturing Science and Technology · doi:10.1016/j.cirpj.2022.11.003 · Cited by 327
Three-dimensional print of a liver for preoperative planning in living donor liver transplantation
Zein, N. N., Hanouneh, I. A., Bishop, P. D., Samaan, M., Eghtesad, B., Quintini, C., Miller, C., Yerian, L., & Klatte, R. (2013) · Liver Transplantation · doi:10.1002/lt.23729 · Cited by 326
Vat photopolymerization of polymers and polymer composites: Processes and applications
Al Rashid, A., Ahmed, W., Khalid, M. Y., & Koç, M. (2021) · Additive Manufacturing · doi:10.1016/j.addma.2021.102279 · Cited by 326
Fu, Y., Downey, A. R. J., Yuan, L., Zhang, T., Pratt, A., & Balogun, Y. A. (2022) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2021.12.061 · Cited by 326
Colorado, H. A., Velásquez, E. I. G., & Monteiro, S. N. (2020) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2020.04.062 · Cited by 320
Boularaoui, S., Al Hussein, G., Khan, K. A., Christoforou, N., & Stefanini, C. (2020) · Bioprinting · doi:10.1016/j.bprint.2020.e00093 · Cited by 320
Extrusion-based additive manufacturing technologies: State of the art and future perspectives
Altıparmak, S. C., Yardley, V. A., Shi, Z., & Lin, J. (2022) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2022.09.032 · Cited by 320
Research status of laser additive manufacturing for metal: a review
Gong, G., Ye, J., Chi, Y., Zhao, Z., Wang, Z., Xia, G., Du, X., Tian, H., Yu, H., & Chen, C. (2021) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2021.08.050 · Cited by 318
Bayat, M., Dong, W. Y., Thorborg, J., To, A. C., & Hattel, J. H. (2021) · Additive manufacturing · doi:10.1016/j.addma.2021.102278 · Cited by 318
Additive Processing of Polymers
Wendel, B., Rietzel, D., Kühnlein, F., Feulner, R., Hülder, G., & Schmachtenberg, E. (2008) · Macromolecular Materials and Engineering · doi:10.1002/mame.200800121 · Cited by 314
Choi, Y.-J., Jun, Y.-J., Kim, D. Y., Yi, H.-G., Chae, S.-H., Kang, J., Lee, J., Gao, G., Kong, J.-S., Jang, J., et al. (2019) · Biomaterials · doi:10.1016/j.biomaterials.2019.03.036 · Cited by 314
3D printing of polylactic acid: recent advances and opportunities
Joseph, T. M., Kallingal, A., Suresh, A. M., Mahapatra, D. K., Hasanin, M. S., Haponiuk, J., & Thomas, S. (2023) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-022-10795-y · Cited by 313
3D Printed Stem‐Cell Derived Neural Progenitors Generate Spinal Cord Scaffolds
Joung, D., Truong, V., Neitzke, C. C., Guo, S., Walsh, P. J., Monat, J. R., Meng, F., Park, S. H., Dutton, J. R., Parr, A. M., et al. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201801850 · Cited by 306
Kanishka, K., & Acherjee, B. (2023) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2023.01.034 · Cited by 300
Self-citationMetallic additive manufacturing: state-of-the-art review and prospects
Vayre, B., Vignat, F., & Villeneuve, F. (2012) · Mechanics & Industry · doi:10.1051/meca/2012003 · Cited by 294
Tshephe, T. S., Akinwamide, S. O., Olevsky, E., & Olubambi, P. A. (2022) · Heliyon · doi:10.1016/j.heliyon.2022.e09041 · Cited by 293
Additive manufacturing a powerful tool for the aerospace industry
Khorasani, M., Ghasemi, A., Rolfe, B., & Gibson, I. (2021) · Rapid Prototyping Journal · doi:10.1108/rpj-01-2021-0009 · Cited by 292
Design for sustainable additive manufacturing: A review
Hegab, H., Khanna, N., Monib, N., & Salem, A. (2023) · Sustainable Materials and Technologies · doi:10.1016/j.susmat.2023.e00576 · Cited by 289
Design for additive manufacturing: Framework and methodology
Vaneker, T., Bernard, A., Moroni, G., Gibson, I., & Zhang, Y. (2020) · CIRP Annals · doi:10.1016/j.cirp.2020.05.006 · Cited by 289
Palaganas, N. B., Mangadlao, J. D., de Leon, A. C. C., Palaganas, J. O., Pangilinan, K. D., Lee, Y. J., & Advincula, R. C. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b09223 · Cited by 279
Design, management and control of demanufacturing and remanufacturing systems
Tolio, T., Bernard, A., Colledani, M., Kara, S., Seliger, G., Duflou, J., Battaia, O., & Takata, S. (2017) · CIRP Annals · doi:10.1016/j.cirp.2017.05.001 · Cited by 277
Robot assisted additive manufacturing: A review
Urhal, P., Weightman, A., Diver, C., & Bartolo, P. (2019) · Robotics and Computer-Integrated Manufacturing · doi:10.1016/j.rcim.2019.05.005 · Cited by 277
Advances in 3D/4D printing of mechanical metamaterials: From manufacturing to applications
Zhou, X., Ren, L., Song, Z., Li, G., Zhang, J., Li, B., Wu, Q., Li, W., Ren, L., & Liu, Q. (2023) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2023.110585 · Cited by 277
A review on additive manufacturing of ceramic matrix composites
Sun, J., Ye, D., Zou, J., Chen, X., Wang, Y., Yuan, J., Liang, H., Qu, H., Binner, J., & Bai, J. (2023) · Journal of Materials Science & Technology · doi:10.1016/j.jmst.2022.06.039 · Cited by 265
Effects of process parameters on porosity in laser powder bed fusion revealed by X-ray tomography
du Plessis, A. (2019) · Additive Manufacturing · doi:10.1016/j.addma.2019.100871 · Cited by 264
3-D printing of concrete: Beyond horizons
Khan, M. S., Sanchez, F., & Zhou, H. (2020) · Cement and Concrete Research · doi:10.1016/j.cemconres.2020.106070 · Cited by 260
Hybrid metal additive manufacturing: A state–of–the-art review
Pragana, J. P. M., Sampaio, R. F. V., Bragança, I. M. F., Silva, C. M. A., & Martins, P. A. F. (2021) · Advances in Industrial and Manufacturing Engineering · doi:10.1016/j.aime.2021.100032 · Cited by 256
Advances in selective laser sintering of polymers
Han, W., Kong, L., & Xu, M. (2022) · International Journal of Extreme Manufacturing · doi:10.1088/2631-7990/ac9096 · Cited by 254
A review on metal additive manufacturing for intricately shaped aerospace components
Madhavadas, V., Srivastava, D., Chadha, U., Aravind Raj, S., Sultan, M. T. H., Shahar, F. S., & Shah, A. U. M. (2022) · CIRP Journal of Manufacturing Science and Technology · doi:10.1016/j.cirpj.2022.07.005 · Cited by 251
Material Anisotropy in Additively Manufactured Polymers and Polymer Composites: A Review
Zohdi, N., & Yang, R. (. (2021) · Polymers · doi:10.3390/polym13193368 · Cited by 250
Li, J., Zhan, D., Jiang, Z., Zhang, H., Yang, Y., & Zhang, Y. (2023) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2022.12.177 · Cited by 246
Lakkala, P., Munnangi, S. R., Bandari, S., & Repka, M. (2023) · International Journal of Pharmaceutics: X · doi:10.1016/j.ijpx.2023.100159 · Cited by 246
Robust Metal Additive Manufacturing Process Selection and Development for Aerospace Components
Gradl, P., Tinker, D. C., Park, A., Mireles, O. R., Garcia, M., Wilkerson, R., & Mckinney, C. (2022) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-022-06850-0 · Cited by 240
Sing, S. L., Lam, L. P., Zhang, D. Q., Liu, Z. H., & Chua, C. K. (2015) · Materials Characterization · doi:10.1016/j.matchar.2015.07.007 · Cited by 238
Current research and industrial application of laser powder directed energy deposition
Piscopo, G., & Iuliano, L. (2022) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-021-08596-w · Cited by 238
Efficiency and feasibility of product disassembly: A case-based study
Duflou, J. R., Seliger, G., Kara, S., Umeda, Y., Ometto, A., & Willems, B. (2008) · CIRP Annals · doi:10.1016/j.cirp.2008.09.009 · Cited by 235
Das, A., Chatham, C. A., Fallon, J. J., Zawaski, C. E., Gilmer, E. L., Williams, C. B., & Bortner, M. J. (2020) · Additive Manufacturing · doi:10.1016/j.addma.2020.101218 · Cited by 234
Research needs and recommendations on environmental implications of additive manufacturing
Rejeski, D., Zhao, F., & Huang, Y. (2018) · Additive Manufacturing · doi:10.1016/j.addma.2017.10.019 · Cited by 233
Singh, N., Hameed, P., Ummethala, R., Manivasagam, G., Prashanth, K. G., & Eckert, J. (2020) · Materials Today Advances · doi:10.1016/j.mtadv.2020.100097 · Cited by 229
Altıparmak, S. C., Yardley, V. A., Shi, Z., & Lin, J. (2021) · International Journal of Lightweight Materials and Manufacture · doi:10.1016/j.ijlmm.2020.12.004 · Cited by 224
Ahmed, G. H. (2023) · Journal of Building Engineering · doi:10.1016/j.jobe.2023.105863 · Cited by 224
Hybrid Processes in Additive Manufacturing
Sealy, M. P., Madireddy, G., Williams, R. E., Rao, P., & Toursangsaraki, M. (2018) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4038644 · Cited by 223
Additive manufacturing of duplex stainless steels - A critical review
Zhang, D., Liu, A., Yin, B., & Wen, P. (2022) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2021.11.036 · Cited by 223
Nouri, A., Rohani Shirvan, A., Li, Y., & Wen, C. (2021) · Journal of Materials Science & Technology · doi:10.1016/j.jmst.2021.03.058 · Cited by 222
Charmi, A., Falkenberg, R., Ávila, L., Mohr, G., Sommer, K., Ulbricht, A., Sprengel, M., Saliwan Neumann, R., Skrotzki, B., & Evans, A. (2021) · Materials Science and Engineering: A · doi:10.1016/j.msea.2020.140154 · Cited by 211
Circular Economy strategies for concrete: implementation and integration
Marsh, A. T. M., Velenturf, A. P. M., & Bernal, S. A. (2022) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2022.132486 · Cited by 209
Korkmaz, M. E., Gupta, M. K., Robak, G., Moj, K., Krolczyk, G. M., & Kuntoğlu, M. (2022) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2022.07.051 · Cited by 209
Advancing the field of 3D biomaterial printing
Jakus, A. E., Rutz, A. L., & Shah, R. N. (2016) · Biomedical Materials · doi:10.1088/1748-6041/11/1/014102 · Cited by 203
Design for additive manufacturing – a review of available design methods and software
Wiberg, A., Persson, J., & Ölvander, J. (2019) · Rapid Prototyping Journal · doi:10.1108/rpj-10-2018-0262 · Cited by 203
Additive manufacturing method and different welding applications
Karayel, E., & Bozkurt, Y. (2020) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2020.08.039 · Cited by 203
Dehoff, R. R., & Babu, S. S. (2010) · Acta Materialia · doi:10.1016/j.actamat.2010.03.006 · Cited by 197
A review on additive manufacturing of refractory tungsten and tungsten alloys
Talignani, A., Seede, R., Whitt, A., Zheng, S., Ye, J., Karaman, İ., Kirka, M. M., Katoh, Y., & Wang, Y. (2022) · Additive manufacturing · doi:10.1016/j.addma.2022.103009 · Cited by 197
Additive manufacturing of bimetallic structures
Bandyopadhyay, A., Zhang, Y., & Onuike, B. (2022) · Virtual and Physical Prototyping · doi:10.1080/17452759.2022.2040738 · Cited by 196
Additive manufacturing of cementitious composites: Materials, methods, potentials, and challenges
Hamidi, F., & Aslani, F. (2019) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2019.05.140 · Cited by 191
Roach, D. J., Hamel, C. M., Dunn, C. K., Johnson, M. V., Kuang, X., & Qi, H. J. (2019) · Additive Manufacturing · doi:10.1016/j.addma.2019.100819 · Cited by 191
Yuan, S., Zheng, Y., Chua, C. K., Yan, Q., & Zhou, K. (2018) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2017.11.007 · Cited by 190
Bekker, A. C. M., & Verlinden, J. C. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.12.148 · Cited by 190
In-situ monitoring of sub-surface and internal defects in additive manufacturing: A review
AbouelNour, Y., & Gupta, N. (2022) · Materials & Design · doi:10.1016/j.matdes.2022.111063 · Cited by 189
A review of additive manufacturing of cermets
Aramian, A., Razavi, N., Sadeghian, Z., & Berto, F. (2020) · Additive Manufacturing · doi:10.1016/j.addma.2020.101130 · Cited by 186
Additive manufacturing of ceramic materials for energy applications: Road map and opportunities
Cramer, C. L., Ionescu, E., Graczyk, M., Nelson, A. T., Katoh, Y., Haslam, J. J., Wondraczek, L., Aguirre, T. G., LeBlanc, S., Wang, H., et al. (2022) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2022.01.058 · Cited by 186
Germaini, M.-M., Belhabib, S., Guessasma, S., Deterre, R., Corre, P., & Weiss, P. (2022) · Progress in Materials Science · doi:10.1016/j.pmatsci.2022.100963 · Cited by 184
Review of additive manufacturing methods for high-performance ceramic materials
Wang, J.-C., Dommati, H., & Hsieh, S.-J. (2019) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-019-03669-3 · Cited by 181
Solid-State Metal Additive Manufacturing: A Review
Tuncer, N., & Bose, A. (2020) · JOM · doi:10.1007/s11837-020-04260-y · Cited by 181
Pathak, S., & Saha, G. (2017) · Coatings · doi:10.3390/coatings7080122 · Cited by 180
Rahito, Wahab, D., & Azman, A. (2019) · Processes · doi:10.3390/pr7110802 · Cited by 180
A review on qualification and certification for metal additive manufacturing
Chen, Z., Han, C., Gao, M., Kandukuri, S. Y., & Zhou, K. (2022) · Virtual and Physical Prototyping · doi:10.1080/17452759.2021.2018938 · Cited by 178
The impact of the circular economy on sustainable development: A European panel data approach
Knäble, D., Puente, E. D. Q., Pérez‐Cornejo, C., & Baumgärtler, T. (2022) · Sustainable Production and Consumption · doi:10.1016/j.spc.2022.09.016 · Cited by 178
Moeinfar, K., Khodabakhshi, F., Kashani-bozorg, S. F., Mohammadi, M., & Gerlich, A. P. (2022) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2021.12.039 · Cited by 176
Leino, M., Pekkarinen, J., & Soukka, R. (2016) · Physics Procedia · doi:10.1016/j.phpro.2016.08.077 · Cited by 174
Chakraborty, S., & Biswas, M. C. (2020) · Composite Structures · doi:10.1016/j.compstruct.2020.112562 · Cited by 174
Wei, C., Sun, Z., Chen, Q., Liu, Z., & Li, L. (2019) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4043983 · Cited by 172
Nandhakumar, R., & Venkatesan, K. (2023) · Materials Today Communications · doi:10.1016/j.mtcomm.2023.105538 · Cited by 171
Pal, A. K., Mohanty, A. K., & Misra, M. (2021) · RSC Advances · doi:10.1039/d1ra04060j · Cited by 169
Lu, L., Hou, J., Yuan, S., Yao, X., Li, Y., & Zhu, J. (2023) · Robotics and Computer-Integrated Manufacturing · doi:10.1016/j.rcim.2022.102431 · Cited by 168
A review of void reduction strategies in material extrusion-based additive manufacturing
Sun, X., Mazur, M., & Cheng, C. (2023) · Additive manufacturing · doi:10.1016/j.addma.2023.103463 · Cited by 167
Salifu, S., Desai, D., Ogunbiyi, O., & Mwale, K. (2022) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-021-08569-z · Cited by 165
Dejene, N. D., & Lemu, H. G. (2023) · Metals · doi:10.3390/met13020424 · Cited by 165
A simple route for additive manufacturing of 316L stainless steel via Fused Filament Fabrication
Sadaf, M., Bragaglia, M., & Nanni, F. M. C. (2021) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2021.04.055 · Cited by 164
An analysis of remanufacturing practices in Japan
Matsumoto, M., & Umeda, Y. (2011) · Journal of remanufacturing · doi:10.1186/2210-4690-1-2 · Cited by 163
3D printed architected lattice structures by material jetting
Mora, S. A., Pugno, N. M., & Misseroni, D. (2022) · Materials Today · doi:10.1016/j.mattod.2022.05.008 · Cited by 162
Vat photopolymerization-based 3D printing of polymer nanocomposites: current trends and applications
Shah, M., Ullah, A., Azher, K., Rehman, A. U., Juan, W., Aktürk, N., Tüfekci, C. S., & Salamci, M. U. (2023) · RSC Advances · doi:10.1039/d2ra06522c · Cited by 162
A market assessment of additive manufacturing potential for the aerospace industry
Altıparmak, S. C., & Xiao, B. (2021) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2021.05.072 · Cited by 161
3D printing with cementitious materials: Challenges and opportunities for the construction sector
Robayo-Salazar, R., Mejía de Gutiérrez, R., Villaquirán-Caicedo, M. A., & Delvasto Arjona, S. (2023) · Automation in Construction · doi:10.1016/j.autcon.2022.104693 · Cited by 160
Markandan, K., & Lai, C. Q. (2023) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2023.110661 · Cited by 159
Modelling of additive manufacturing processes: a review and classification
Stavropoulos, P., & Foteinopoulos, P. (2018) · Manufacturing Review · doi:10.1051/mfreview/2017014 · Cited by 158
Smart remanufacturing: a review and research framework
Kerin, M., & Pham, D. T. (2020) · Journal of Manufacturing Technology Management · doi:10.1108/jmtm-06-2019-0205 · Cited by 158
Post-Process Treatments for Additive-Manufactured Metallic Structures: A Comprehensive Review
Ge, J., Pillay, S., & Ning, H. (2023) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-023-08051-9 · Cited by 157
Additive manufacturing of metallic based on extrusion process: A review
Nurhudan, A. I., Supriadi, S., Whulanza, Y., & Saragih, A. S. (2021) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2021.04.018 · Cited by 157
Potential repair techniques for automotive composites: A review
Balakrishnan, V. S., & Seidlitz, H. (2018) · Composites Part B Engineering · doi:10.1016/j.compositesb.2018.03.016 · Cited by 155
Babu, S. S., Mourad, A. I., Harib, K. H., & Vijayavenkataraman, S. (2022) · Virtual and Physical Prototyping · doi:10.1080/17452759.2022.2141653 · Cited by 155
He, F., Yuan, L., Mu, H., Ros, M., Ding, D., Pan, Z. S., & Li, H. (2023) · Robotics and Computer-Integrated Manufacturing · doi:10.1016/j.rcim.2023.102525 · Cited by 154
Li, X., Kang, C. W., Huang, H., & Sercombe, T. B. (2014) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2014.06.022 · Cited by 151
A robotic cell for performing sheet lamination-based additive manufacturing
Bhatt, P. M., Kabir, A. M., Peralta, M., Bruck, H. A., & Gupta, S. K. (2019) · Additive manufacturing · doi:10.1016/j.addma.2019.02.002 · Cited by 146
Singh, G., Missiaen, J., Bouvard, D., & Chaix, J.-M. (2021) · Additive manufacturing · doi:10.1016/j.addma.2021.102287 · Cited by 142
Powder based additive manufacturing for biomedical application of titanium and its alloys: a review
Jang, T., Kim, D., Han, G., Yoon, C., & Jung, H. (2020) · Biomedical Engineering Letters · doi:10.1007/s13534-020-00177-2 · Cited by 141
FDM-based additive manufacturing of recycled thermoplastics and associated composites
Mishra, V., Negi, S., & Kar, S. (2023) · Journal of Material Cycles and Waste Management · doi:10.1007/s10163-022-01588-2 · Cited by 141
Mattera, G., Nele, L., & Paolella, D. (2023) · Journal of Intelligent Manufacturing · doi:10.1007/s10845-023-02085-5 · Cited by 141
Aziz, N. A., Adnan, N. A. A., Wahab, D. A., & Azman, A. H. (2021) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2021.126401 · Cited by 138
Olhero, S. M., Torres, P. M. C., Mesquita‐Guimarães, J., Baltazar, J. J., Pinho-da-Cruz, J., & Gouveia, S. (2022) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2022.02.041 · Cited by 137
Classification, processing, and applications of bioink and 3D bioprinting: A detailed review
Raees, S., Ullah, F., Javed, F. T., Akil, H. M., Khan, M. J., Safdar, M. M., Din, I. U., Alotaibi, M. A., Alharthi, A. I., Bakht, M. A., et al. (2023) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2023.123476 · Cited by 137
Badkoobeh, F., Mostaan, H., Rafiei, M., Bakhsheshi‐Rad, H. R., Ramakrishna, S., & Chen, D. (2023) · Journal of Magnesium and Alloys · doi:10.1016/j.jma.2022.12.001 · Cited by 135
A review on remanufacture of dies and moulds
Chen, C., Wang, Y., Ou, H., He, Y., & Tang, X. (2013) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2013.09.014 · Cited by 134
Le, V. T., Paris, H., & Mandil, G. (2017) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2017.06.003 · Cited by 133
Agrawal, P., Haridas, R. S., Yadav, S., Thapliyal, S., Gaddam, S., Verma, R., & Mishra, R. S. (2021) · Additive manufacturing · doi:10.1016/j.addma.2021.102259 · Cited by 133
Parsazadeh, M., Sharma, S., & Dahotre, N. B. (2023) · Progress in Materials Science · doi:10.1016/j.pmatsci.2023.101102 · Cited by 133
Cold Spraying of Titanium: A Review of Bonding Mechanisms, Microstructure and Properties
Hussain, T. (2012) · Key engineering materials · doi:10.4028/www.scientific.net/kem.533.53 · Cited by 131
Monteiro, H., Carmona-Aparicio, G., Lei, I., & Despeisse, M. (2022) · Energy Reports · doi:10.1016/j.egyr.2022.01.035 · Cited by 131
Current Implementation Status of Cold Spray Technology: A Short Review
Sun, W. R., Chu, X., Lan, H., Huang, R., Huang, J., Xie, Y., Huang, G., & Huang, G. (2022) · Journal of Thermal Spray Technology · doi:10.1007/s11666-022-01382-4 · Cited by 130
Direct metal fabrication in rapid prototyping: A review
Ahmed, N. (2019) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2019.05.001 · Cited by 129
Recent Advances in Polymer-based 3D Printing for Wastewater Treatment Application: An Overview
Yusoff, N. H. M., Teo, L.-R. I., Phang, S. J., Wong, V.-L., Cheah, K. H., & Lim, S. S. (2021) · Chemical Engineering Journal · doi:10.1016/j.cej.2021.132311 · Cited by 129
Mu, H., He, F., Yuan, L., Commins, P., Wang, H., & Pan, Z. S. (2023) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2023.01.012 · Cited by 128
Muhindo, D., Elkanayati, R. M., Srinivasan, P., Repka, M. A., & Ashour, E. A. (2023) · AAPS PharmSciTech · doi:10.1208/s12249-023-02524-9 · Cited by 126
Donough, M. J., Shafaq, S., John, N. A. S., Phillips, A. W., & Prusty, B. G. (2022) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2022.107179 · Cited by 124
Narayanan, J. A., Paul, C. P., Mishra, S. K., & Bindra, K. S. (2019) · Vacuum · doi:10.1016/j.vacuum.2019.05.027 · Cited by 123
Gisario, A., Barletta, M., & Veniali, F. (2022) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-022-08840-x · Cited by 120
Adil, S., & Lazoğlu, İ. (2022) · Journal of Applied Polymer Science · doi:10.1002/app.53476 · Cited by 120
Vicente, C. M. S., Sardinha, M., Reis, L. G., Ribeiro, A. M. R., & Leite, M. (2023) · Progress in Additive Manufacturing · doi:10.1007/s40964-023-00397-9 · Cited by 120
Prathyusha, A. L. R., & Babu, G. R. (2022) · Materials Today Proceedings · doi:10.1016/j.matpr.2022.02.604 · Cited by 118
Biomedical Applications of Metal 3D Printing
Velásquez–García, L. F., & Kornbluth, Y. (2021) · Annual Review of Biomedical Engineering · doi:10.1146/annurev-bioeng-082020-032402 · Cited by 115
Madhu, N. R., Erfani, H., Jadoun, S., Amir, M., Thiagarajan, Y., & Chauhan, N. P. S. (2022) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-022-10048-y · Cited by 115
Emerging 3D bioprinting applications in plastic surgery
Pu, Y., Ju, Y., Hu, Y., Xie, X., Fang, B., & Lei, L. (2023) · Biomaterials Research · doi:10.1186/s40824-022-00338-7 · Cited by 115
Progress and opportunities in additive manufacturing of electrically conductive polymer composites
Yan, Y., Jiang, Y., Ng, E. L. L., Zhang, Y., Owh, C., Wang, F., Song, Q., Feng, T., Zhang, B., Li, P., et al. (2022) · Materials Today Advances · doi:10.1016/j.mtadv.2022.100333 · Cited by 114
Additive manufacturing and 3D printing of metallic biomaterials
Chua, K., Khan, I., Malhotra, R., & Zhu, D. (2021) · Engineered Regeneration · doi:10.1016/j.engreg.2021.11.002 · Cited by 113
Motallebi, R., Savaedi, Z., & Mirzadeh, H. (2022) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2022.07.154 · Cited by 113
Amini, A., Guijt, R. M., Themelis, T., Vos, J. D., & Eeltink, S. (2023) · Journal of Chromatography A · doi:10.1016/j.chroma.2023.463842 · Cited by 113
Cited by
Ilhan, R., Gumus, O. Y., & Lekesiz, H. (2026) · Polymer Composites · doi:10.1002/pc.70459 · Cited by 5
Metadata
- Authors
- Kanishka, K., & Acherjee, B.
- Venue
- Journal of Manufacturing Processes
- Publisher
- Elsevier BV
- Published
- 2023-12
- Volume
- 107
- Pages
- 574-619
- ISSN
- 1526-6125 (ISSN-L)
- OpenAlex
- W4388476023
- Cited by
- 343
- References
- 309
- FWCI
- 24.91
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.