The DOI matches its Crossref record; 242 of the 242 references it cites were found in a registry or an index.
Fundamentals and Applications of Photo-Cross-Linking in Bioprinting
Abstract
This review provides a detailed overview of the rapidly advancing field of biofabrication, particularly with regards to the use of photo-cross-linking (i.e., light-based) techniques. The major emphasis of this review is on the fundamentals of photo-cross-linking and key criteria identified for the successful design and implementation of photo-cross-linked bioinks and bioresins in extrusion-based and lithography-based bioprinting. The general mechanisms associated with photo-cross-linking (e.g., free-radical chain polymerization, thiol–ene, photomediated redox) of natural and synthetic materials are described to inform bioink and bioresin design, which includes the selection of polymers, functional group modifications, photoinitiators, and light sources that enable facile and cytocompatible photo-cross-linking. Depending on material selection and the bioprinting technique of interest, we describe the specific bioink or bioresin properties and criteria that must be achieved to ensure optimal printability and utility. Finally, examples of current state-of-the-art applications of light-based bioprinting for in vitro tissue models, tissue engineering, and regenerative medicine are provided to further motivate future opportunities within the bioprinting landscape that are facilitated with light.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
1 retracted
Eosin Y catalysed photoredox synthesis: a review
Srivastava, V., & Singh, P. P. (2017) · RSC Advances · doi:10.1039/c7ra05444k · Cited by 336
RetractedHoyle, C. E., & Bowman, C. N. (2010) · Angewandte Chemie International Edition · doi:10.1002/anie.200903924 · Cited by 4,182
Global, Regional, and National Burden of Cardiovascular Diseases for 10 Causes, 1990 to 2015
Roth, G. A., Johnson, C., Abajobir, A., Abd-Allah, F., Abera, S. F., Abyu, G., Ahmed, M., Aksut, B., Alam, T., Alam, K., et al. (2017) · Journal of the American College of Cardiology · doi:10.1016/j.jacc.2017.04.052 · Cited by 3,791
Oxidative DNA damage: mechanisms, mutation, and disease
Cooke, M. S., Evans, M. D., Dizdaroglu, M., & Lunec, J. (2003) · The FASEB Journal · doi:10.1096/fj.02-0752rev · Cited by 3,245
Photosensitized singlet oxygen and its applications
DeRosa, M. (2002) · Coordination Chemistry Reviews · doi:10.1016/s0010-8545(02)00034-6 · Cited by 2,931
A review on stereolithography and its applications in biomedical engineering
Melchels, F. P. W., Feijen, J., & Grijpma, D. W. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.04.050 · Cited by 2,457
Bone Tissue Engineering: Recent Advances and Challenges
Amini, A. R., Laurencin, C. T., & Nukavarapu, S. P. (2012) · Critical Reviews in Biomedical Engineering · doi:10.1615/critrevbiomedeng.v40.i5.10 · Cited by 2,336
Continuous liquid interface production of 3D objects
Tumbleston, J. R., Shirvanyants, D., Ermoshkin, N., Janusziewicz, R., Johnson, A. R., Kelly, D., Chen, K., Pinschmidt, R., Rolland, J. P., Ermoshkin, A., et al. (2015) · Science · doi:10.1126/science.aaa2397 · Cited by 2,278
3D bioprinting of vascularized, heterogeneous cell-laden tissue constructs
Kolesky, D. B., Truby, R. L., Gladman, A. S., Busbee, T. A., Homan, K. A., & Lewis, J. A. (2014) · Advanced Materials · doi:10.1002/adma.201305506 · Cited by 2,102
A practical guide to hydrogels for cell culture
Caliari, S. R., & Burdick, J. A. (2016) · Nature Methods · doi:10.1038/nmeth.3839 · Cited by 2,075
Self-citationThree-dimensional microfabrication with two-photon-absorbed photopolymerization
Maruo, S., Nakamura, O., & Kawata, S. (1997) · Optics Letters · doi:10.1364/ol.22.000132 · Cited by 1,952
25th Anniversary Article: Engineering Hydrogels for Biofabrication
Malda, J., Visser, J., Melchels, F. P., Jüngst, T., Hennink, W. E., Dhert, W. J. A., Groll, J., & Hutmacher, D. W. (2013) · Advanced Materials · doi:10.1002/adma.201302042 · Cited by 1,901
Hinton, T. J., Jallerat, Q., Palchesko, R. N., Park, J. H., Grodzicki, M. S., Shue, H.-J., Ramadan, M. H., Hudson, A. R., & Feinberg, A. W. (2015) · Science Advances · doi:10.1126/sciadv.1500758 · Cited by 1,805
3D bioprinting of collagen to rebuild components of the human heart
Lee, A., Hudson, A. R., Shiwarski, D. J., Tashman, J. W., Hinton, T. J., Yerneni, S., Bliley, J. M., Campbell, P. G., & Feinberg, A. W. (2019) · Science · doi:10.1126/science.aav9051 · Cited by 1,782
Photodegradable Hydrogels for Dynamic Tuning of Physical and Chemical Properties
Kloxin, A. M., Kasko, A. M., Salinas, C. N., & Anseth, K. S. (2009) · Science · doi:10.1126/science.1169494 · Cited by 1,748
Thiol-click chemistry: a multifaceted toolbox for small molecule and polymer synthesis
Hoyle, C. E., Lowe, A. B., & Bowman, C. N. (2010) · Chemical Society Reviews · doi:10.1039/b901979k · Cited by 1,639
Thiol-ene “click” reactions and recent applications in polymer and materials synthesis
Lowe, A. B. (2010) · Polym. Chem. · doi:10.1039/b9py00216b · Cited by 1,563
Markstedt, K., Mantas, A., Tournier, I., Martínez Ávila, H., Hägg, D., & Gatenholm, P. (2015) · Biomacromolecules · doi:10.1021/acs.biomac.5b00188 · Cited by 1,528
Lutolf, M. P., Lauer-Fields, J. L., Schmoekel, H. G., Metters, A. T., Weber, F. E., Fields, G. B., & Hubbell, J. A. (2003) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.0737381100 · Cited by 1,508
Bioactive modification of poly (ethylene glycol) hydrogels for tissue engineering
Zhu, J. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.02.044 · Cited by 1,457
Thiol–enes: Chemistry of the past with promise for the future
Hoyle, C. E., Lee, T. Y., & Roper, T. (2004) · Journal of Polymer Science Part A: Polymer Chemistry · doi:10.1002/pola.20366 · Cited by 1,457
Role of tumor microenvironment in tumorigenesis
Wang, M., Zhao, J., Zhang, L., Wei, F., Lian, Y., Wu, Y., Gong, Z., Zhang, S., Zhou, J., Cao, K., et al. (2017) · Journal of Cancer · doi:10.7150/jca.17648 · Cited by 1,404
Multivascular networks and functional intravascular topologies within biocompatible hydrogels
Grigoryan, B., Paulsen, S. J., Corbett, D. C., Sazer, D. W., Fortin, C. L., Zaita, A. J., Greenfield, P. T., Calafat, N. J., Gounley, J. P., Ta, A. H., et al. (2019) · Science · doi:10.1126/science.aav9750 · Cited by 1,396
Controlling the Porosity and Microarchitecture of Hydrogels for Tissue Engineering
Annabi, N., Nichol, J. W., Zhong, X., Ji, C., Koshy, S., Khademhosseini, A., & Dehghani, F. (2010) · Tissue Engineering Part B: Reviews · doi:10.1089/ten.teb.2009.0639 · Cited by 1,308
Hydrogel microparticles for biomedical applications
Daly, A. C., Riley, L., Segura, T., & Burdick, J. A. (2019) · Nature Reviews Materials · doi:10.1038/s41578-019-0148-6 · Cited by 1,249
Self-citationAdditive manufacturing of tissues and organs
Melchels, F. P. W., Domingos, M. A. N., Klein, T. J., Malda, J., Bartolo, P. J., & Hutmacher, D. W. (2012) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2011.11.007 · Cited by 1,213
Fairbanks, B. D., Schwartz, M. P., Bowman, C. N., & Anseth, K. S. (2009) · Biomaterials · doi:10.1016/j.biomaterials.2009.08.055 · Cited by 1,200
Free radical tissue damage: protective role of antioxidant nutrients 1
Machlin, L. J., & Bendich, A. (1987) · The FASEB Journal · doi:10.1096/fasebj.1.6.3315807 · Cited by 1,186
Mechanical memory and dosing influence stem cell fate
Yang, C., Tibbitt, M. W., Basta, L., & Anseth, K. S. (2014) · Nature Materials · doi:10.1038/nmat3889 · Cited by 1,160
Direct 3D Printing of Shear‐Thinning Hydrogels into Self‐Healing Hydrogels
Highley, C. B., Rodell, C. B., & Burdick, J. A. (2015) · Advanced Materials · doi:10.1002/adma.201501234 · Cited by 1,043
Self-citation3D bioprinting for biomedical devices and tissue engineering: A review of recent trends and advances
Derakhshanfar, S., Mbeleck, R., Xu, K., Zhang, X., Zhong, W., & Xing, M. (2018) · Bioactive Materials · doi:10.1016/j.bioactmat.2017.11.008 · Cited by 1,027
Volumetric additive manufacturing via tomographic reconstruction
Kelly, B. E., Bhattacharya, I., Heidari, H., Shusteff, M., Spadaccini, C. M., & Taylor, H. K. (2019) · Science · doi:10.1126/science.aau7114 · Cited by 1,025
Voxelated soft matter via multimaterial multinozzle 3D printing
Skylar-Scott, M. A., Mueller, J., Visser, C. W., & Lewis, J. A. (2019) · Nature · doi:10.1038/s41586-019-1736-8 · Cited by 1,024
Billiet, T., Gevaert, E., De Schryver, T., Cornelissen, M., & Dubruel, P. (2014) · Biomaterials · doi:10.1016/j.biomaterials.2013.09.078 · Cited by 1,015
Materials as stem cell regulators
Murphy, W. L., McDevitt, T. C., & Engler, A. J. (2014) · Nature Materials · doi:10.1038/nmat3937 · Cited by 947
Photopolymerization kinetics of multifunctional monomers
Andrzejewska, E. (2001) · Progress in Polymer Science · doi:10.1016/s0079-6700(01)00004-1 · Cited by 944
Incorporation of adhesion peptides into nonadhesive hydrogels useful for tissue resurfacing
Hern, D. L., & Hubbell, J. A. (1998) · Journal of Biomedical Materials Research · doi:10.1002/(sici)1097-4636(199802)39:2<266::aid-jbm14>3.0.co;2-b · Cited by 904
3D Printing of Highly Stretchable and Tough Hydrogels into Complex, Cellularized Structures
Hong, S., Sycks, D., Chan, H. F., Lin, S., Lopez, G. P., Guilak, F., Leong, K. W., & Zhao, X. (2015) · Advanced Materials · doi:10.1002/adma.201501099 · Cited by 873
Deterministically patterned biomimetic human iPSC-derived hepatic model via rapid 3D bioprinting
Ma, X., Qu, X., Zhu, W., Li, Y.-S., Yuan, S., Zhang, H., Liu, J., Wang, P., Lai, C. S. E., Zanella, F., et al. (2016) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1524510113 · Cited by 872
Microfluidic Bioprinting of Heterogeneous 3D Tissue Constructs Using Low‐Viscosity Bioink
Colosi, C., Shin, S. R., Manoharan, V., Massa, S., Costantini, M., Barbetta, A., Dokmeci, M. R., Dentini, M., & Khademhosseini, A. (2016) · Advanced Materials · doi:10.1002/adma.201503310 · Cited by 863
Gelatin-Methacryloyl Hydrogels: Towards Biofabrication-Based Tissue Repair
Klotz, B. J., Gawlitta, D., Rosenberg, A. J. W. P., Malda, J., & Melchels, F. P. W. (2016) · Trends in Biotechnology · doi:10.1016/j.tibtech.2016.01.002 · Cited by 846
Biomaterials for bone tissue engineering scaffolds: a review
Qu, H., Fu, H., Han, Z., & Sun, Y. (2019) · RSC Advances · doi:10.1039/c9ra05214c · Cited by 827
Blaeser, A., Duarte Campos, D. F., Puster, U., Richtering, W., Stevens, M. M., & Fischer, H. (2016) · Advanced Healthcare Materials · doi:10.1002/adhm.201500677 · Cited by 808
A definition of bioinks and their distinction from biomaterial inks
Groll, J., Burdick, J. A., Cho, D.-W., Derby, B., Gelinsky, M., Heilshorn, S. C., Jüngst, T., Malda, J., Mironov, V. A., Nakayama, K., et al. (2018) · Biofabrication · doi:10.1088/1758-5090/aaec52 · Cited by 797
Self-citationSchuurman, W., Levett, P. A., Pot, M. W., van Weeren, P. R., Dhert, W. J. A., Hutmacher, D. W., Melchels, F. P. W., Klein, T. J., & Malda, J. (2013) · Macromolecular Bioscience · doi:10.1002/mabi.201200471 · Cited by 790
Controlled Degradation and Mechanical Behavior of Photopolymerized Hyaluronic Acid Networks
Burdick, J. A., Chung, C., Jia, X., Randolph, M. A., & Langer, R. (2005) · Biomacromolecules · doi:10.1021/bm049508a · Cited by 777
Self-citationBryant, S. J., Nuttelman, C. R., & Anseth, K. S. (2000) · Journal of Biomaterials Science, Polymer Edition · doi:10.1163/156856200743805 · Cited by 774
Biofabrication: reappraising the definition of an evolving field
Groll, J., Boland, T., Blunk, T., Burdick, J. A., Cho, D.-W., Dalton, P. D., Derby, B., Forgacs, G., Li, Q., Mironov, V. A., et al. (2016) · Biofabrication · doi:10.1088/1758-5090/8/1/013001 · Cited by 731
Self-citationStrategies to Reduce Oxygen Inhibition in Photoinduced Polymerization
Ligon, S. C., Husár, B., Wutzel, H., Holman, R., & Liska, R. (2014) · Chemical Reviews · doi:10.1021/cr3005197 · Cited by 721
Aguado, B. A., Mulyasasmita, W., Su, J., Lampe, K. J., & Heilshorn, S. C. (2012) · Tissue Engineering Part A · doi:10.1089/ten.tea.2011.0391 · Cited by 719
Strategies and Molecular Design Criteria for 3D Printable Hydrogels
Jungst, T., Smolan, W., Schacht, K., Scheibel, T., & Groll, J. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.5b00303 · Cited by 712
DeForest, C. A., & Anseth, K. S. (2011) · Nature Chemistry · doi:10.1038/nchem.1174 · Cited by 708
Degradation of Partially Oxidized Alginate and Its Potential Application for Tissue Engineering
Bouhadir, K. H., Lee, K. Y., Alsberg, E., Damm, K. L., Anderson, K. W., & Mooney, D. J. (2001) · Biotechnology Progress · doi:10.1021/bp010070p · Cited by 672
Lien, S.-M., Ko, L.-Y., & Huang, T.-J. (2009) · Acta Biomaterialia · doi:10.1016/j.actbio.2008.09.020 · Cited by 655
Bioactive Nanoengineered Hydrogels for Bone Tissue Engineering: A Growth-Factor-Free Approach
Xavier, J. R., Thakur, T., Desai, P., Jaiswal, M. K., Sears, N., Cosgriff-Hernandez, E., Kaunas, R., & Gaharwar, A. K. (2015) · ACS Nano · doi:10.1021/nn507488s · Cited by 653
Direct-write bioprinting of cell-laden methacrylated gelatin hydrogels
Bertassoni, L. E., Cardoso, J. C., Manoharan, V., Cristino, A. L., Bhise, N. S., Araujo, W. A., Zorlutuna, P., Vrana, N. E., Ghaemmaghami, A. M., Dokmeci, M. R., et al. (2014) · Biofabrication · doi:10.1088/1758-5082/6/2/024105 · Cited by 642
Biofabrication: A Guide to Technology and Terminology
Moroni, L., Boland, T., Burdick, J. A., De Maria, C., Derby, B., Forgacs, G., Groll, J., Li, Q., Malda, J., Mironov, V. A., et al. (2018) · Trends in Biotechnology · doi:10.1016/j.tibtech.2017.10.015 · Cited by 636
Self-citationWriting in the granular gel medium
Bhattacharjee, T., Zehnder, S. M., Rowe, K. G., Jain, S., Nixon, R. M., Sawyer, W. G., & Angelini, T. E. (2015) · Science Advances · doi:10.1126/sciadv.1500655 · Cited by 635
Wang, Z., Abdulla, R., Parker, B., Samanipour, R., Ghosh, S., & Kim, K. (2015) · Biofabrication · doi:10.1088/1758-5090/7/4/045009 · Cited by 633
Review: Photopolymerizable and Degradable Biomaterials for Tissue Engineering Applications
Ifkovits, J. L., & Burdick, J. A. (2007) · Tissue Engineering · doi:10.1089/ten.2007.0093 · Cited by 619
Self-citationDisulfide Cross-Linked Hyaluronan Hydrogels
Shu, X. Z., Liu, Y., Luo, Y., Roberts, M. C., & Prestwich, G. D. (2002) · Biomacromolecules · doi:10.1021/bm025603c · Cited by 616
A liver-on-a-chip platform with bioprinted hepatic spheroids
Bhise, N. S., Manoharan, V., Massa, S., Tamayol, A., Ghaderi, M., Miscuglio, M., Lang, Q., Shrike Zhang, Y., Shin, S. R., Calzone, G., et al. (2016) · Biofabrication · doi:10.1088/1758-5090/8/1/014101 · Cited by 615
3D Printing of Shear-Thinning Hyaluronic Acid Hydrogels with Secondary Cross-Linking
Ouyang, L., Highley, C. B., Rodell, C. B., Sun, W., & Burdick, J. A. (2016) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.6b00158 · Cited by 607
Self-citationYin, J., Yan, M., Wang, Y., Fu, J., & Suo, H. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b16059 · Cited by 598
Recent advances in hyaluronic acid hydrogels for biomedical applications
Highley, C. B., Prestwich, G. D., & Burdick, J. A. (2016) · Current Opinion in Biotechnology · doi:10.1016/j.copbio.2016.02.008 · Cited by 588
Self-citationFancy, D. A., & Kodadek, T. (1999) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.96.11.6020 · Cited by 576
Direct 3D bioprinting of prevascularized tissue constructs with complex microarchitecture
Zhu, W., Qu, X., Zhu, J., Ma, X., Patel, S., Liu, J., Wang, P., Lai, C. S. E., Gou, M., Xu, Y., et al. (2017) · Biomaterials · doi:10.1016/j.biomaterials.2017.01.042 · Cited by 567
Moving from static to dynamic complexity in hydrogel design
Burdick, J. A., & Murphy, W. L. (2012) · Nature Communications · doi:10.1038/ncomms2271 · Cited by 561
Self-citationDas, S., Pati, F., Choi, Y.-J., Rijal, G., Shim, J.-H., Kim, S. W., Ray, A. R., Cho, D.-W., & Ghosh, S. (2015) · Acta Biomaterialia · doi:10.1016/j.actbio.2014.09.023 · Cited by 553
Engineering alginate as bioink for bioprinting
Jia, J., Richards, D. J., Pollard, S., Tan, Y., Rodriguez, J., Visconti, R. P., Trusk, T. C., Yost, M. J., Yao, H., Markwald, R. R., et al. (2014) · Acta Biomaterialia · doi:10.1016/j.actbio.2014.06.034 · Cited by 549
Bioinks and bioprinting technologies to make heterogeneous and biomimetic tissue constructs
Ashammakhi, N., Ahadian, S., Xu, C., Montazerian, H., Ko, H., Nasiri, R., Barros, N., & Khademhosseini, A. (2019) · Materials Today Bio · doi:10.1016/j.mtbio.2019.100008 · Cited by 549
3D Bioprinting for Organ Regeneration
Cui, H., Nowicki, M., Fisher, J. P., & Zhang, L. G. (2017) · Advanced Healthcare Materials · doi:10.1002/adhm.201601118 · Cited by 535
Kinetic approach of oxygen inhibition in ultraviolet- and laser-induced polymerizations
Decker, C., & Jenkins, A. D. (1985) · Macromolecules · doi:10.1021/ma00148a034 · Cited by 527
Ouyang, L., Highley, C. B., Sun, W., & Burdick, J. A. (2017) · Advanced Materials · doi:10.1002/adma.201604983 · Cited by 524
Self-citationExtrusion Bioprinting of Shear‐Thinning Gelatin Methacryloyl Bioinks
Liu, W., Heinrich, M. A., Zhou, Y., Akpek, A., Hu, N., Liu, X., Guan, X., Zhong, Z., Jin, X., Khademhosseini, A., et al. (2017) · Advanced Healthcare Materials · doi:10.1002/adhm.201601451 · Cited by 503
‘Printability' of Candidate Biomaterials for Extrusion Based 3D Printing: State‐of‐the‐Art
Kyle, S., Jessop, Z. M., Al‐Sabah, A., & Whitaker, I. S. (2017) · Advanced Healthcare Materials · doi:10.1002/adhm.201700264 · Cited by 495
From Shape to Function: The Next Step in Bioprinting
Levato, R., Jungst, T., Scheuring, R. G., Blunk, T., Groll, J., & Malda, J. (2020) · Advanced Materials · doi:10.1002/adma.201906423 · Cited by 476
Chan, V., Zorlutuna, P., Jeong, J. H., Kong, H., & Bashir, R. (2010) · Lab on a Chip · doi:10.1039/c004285d · Cited by 468
Skardal, A., Zhang, J., & Prestwich, G. D. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.04.045 · Cited by 461
Jammed Microgel Inks for 3D Printing Applications
Highley, C. B., Song, K. H., Daly, A. C., & Burdick, J. A. (2019) · Advanced Science · doi:10.1002/advs.201801076 · Cited by 456
Self-citationA poly(d,l-lactide) resin for the preparation of tissue engineering scaffolds by stereolithography
Melchels, F. P. W., Feijen, J., & Grijpma, D. W. (2009) · Biomaterials · doi:10.1016/j.biomaterials.2009.03.055 · Cited by 437
Skardal, A., Devarasetty, M., Kang, H.-W., Mead, I., Bishop, C., Shupe, T., Lee, S. J., Jackson, J., Yoo, J., Soker, S., et al. (2015) · Acta Biomaterialia · doi:10.1016/j.actbio.2015.07.030 · Cited by 428
Rapid Continuous Multimaterial Extrusion Bioprinting
Liu, W., Zhang, Y. S., Heinrich, M. A., De Ferrari, F., Jang, H. L., Bakht, S. M., Alvarez, M. M., Yang, J., Li, Y., Trujillo‐de Santiago, G., et al. (2017) · Advanced Materials · doi:10.1002/adma.201604630 · Cited by 424
The effect of photopolymerization on stem cells embedded in hydrogels
Fedorovich, N. E., Oudshoorn, M. H., van Geemen, D., Hennink, W. E., Alblas, J., & Dhert, W. J. A. (2009) · Biomaterials · doi:10.1016/j.biomaterials.2008.09.037 · Cited by 416
Bioprinting of hybrid tissue constructs with tailorable mechanical properties
Schuurman, W., Khristov, V, Pot, M. W., van Weeren, P. R., Dhert, W. J. A., & Malda, J. (2011) · Biofabrication · doi:10.1088/1758-5082/3/2/021001 · Cited by 409
Ma, X., Liu, J., Zhu, W., Tang, M., Lawrence, N., Yu, C., Gou, M., & Chen, S. (2018) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2018.06.011 · Cited by 401
Dhariwala, B., Hunt, E., & Boland, T. (2004) · Tissue Engineering · doi:10.1089/1076327042500256 · Cited by 389
Alginate Sulfate–Nanocellulose Bioinks for Cartilage Bioprinting Applications
Müller, M., Öztürk, E., Arlov, Ø., Gatenholm, P., & Zenobi-Wong, M. (2017) · Annals of Biomedical Engineering · doi:10.1007/s10439-016-1704-5 · Cited by 389
Lin, H., Zhang, D., Alexander, P. G., Yang, G., Tan, J., Cheng, A. W.-M., & Tuan, R. S. (2013) · Biomaterials · doi:10.1016/j.biomaterials.2012.09.048 · Cited by 382
Biofabrication of tissue constructs by 3D bioprinting of cell-laden microcarriers
Levato, R., Visser, J., Planell, J. A., Engel, E., Malda, J., & Mateos-Timoneda, M. A. (2014) · Biofabrication · doi:10.1088/1758-5082/6/3/035020 · Cited by 380
Aqueous Two‐Phase Emulsion Bioink‐Enabled 3D Bioprinting of Porous Hydrogels
Ying, G., Jiang, N., Maharjan, S., Yin, Y., Chai, R., Cao, X., Yang, J., Miri, A. K., Hassan, S., & Zhang, Y. S. (2018) · Advanced Materials · doi:10.1002/adma.201805460 · Cited by 377
Critically Evaluated Rate Coefficients for Free‐Radical Polymerization, 5,
Asua, J. M., Beuermann, S., Buback, M., Castignolles, P., Charleux, B., Gilbert, R. G., Hutchinson, R. A., Leiza, J. R., Nikitin, A. N., Vairon, J., et al. (2004) · Macromolecular Chemistry and Physics · doi:10.1002/macp.200400355 · Cited by 377
Maiullari, F., Costantini, M., Milan, M., Pace, V., Chirivì, M., Maiullari, S., Rainer, A., Baci, D., Marei, H. E.-S., Seliktar, D., et al. (2018) · Scientific Reports · doi:10.1038/s41598-018-31848-x · Cited by 372
Recent advances in shear‐thinning and self‐healing hydrogels for biomedical applications
Uman, S., Dhand, A., & Burdick, J. A. (2020) · Journal of Applied Polymer Science · doi:10.1002/app.48668 · Cited by 368
Self-citationArcaute, K., Mann, B. K., & Wicker, R. B. (2006) · Annals of Biomedical Engineering · doi:10.1007/s10439-006-9156-y · Cited by 364
Photopolymerization of cell-encapsulating hydrogels: Crosslinking efficiency versus cytotoxicity
Mironi-Harpaz, I., Wang, D. Y., Venkatraman, S., & Seliktar, D. (2012) · Acta Biomaterialia · doi:10.1016/j.actbio.2011.12.034 · Cited by 364
Shu, X. Z., Liu, Y., Palumbo, F., & Prestwich, G. D. (2003) · Biomaterials · doi:10.1016/s0142-9612(03)00267-9 · Cited by 363
New Visible-Light Photoinitiating System for Improved Print Fidelity in Gelatin-Based Bioinks
Lim, K. S., Schon, B. S., Mekhileri, N. V., Brown, G. C. J., Chia, C. M., Prabakar, S., Hooper, G. J., & Woodfield, T. B. F. (2016) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.6b00149 · Cited by 362
Self-citationMouser, V. H. M., Melchels, F. P. W., Visser, J., Dhert, W. J. A., Gawlitta, D., & Malda, J. (2016) · Biofabrication · doi:10.1088/1758-5090/8/3/035003 · Cited by 359
3D bioprinting of methacrylated hyaluronic acid (MeHA) hydrogel with intrinsic osteogenicity
Poldervaart, M. T., Goversen, B., de Ruijter, M., Abbadessa, A., Melchels, F. P. W., Öner, F. C., Dhert, W. J. A., Vermonden, T., & Alblas, J. (2017) · PLOS ONE · doi:10.1371/journal.pone.0177628 · Cited by 357
Jang, J., Kim, T. G., Kim, B. S., Kim, S.-W., Kwon, S.-M., & Cho, D.-W. (2016) · Acta Biomaterialia · doi:10.1016/j.actbio.2016.01.013 · Cited by 344
Microfluidic Printheads for Multimaterial 3D Printing of Viscoelastic Inks
Hardin, J. O., Ober, T. J., Valentine, A. D., & Lewis, J. A. (2015) · Advanced Materials · doi:10.1002/adma.201500222 · Cited by 340
Gramlich, W. M., Kim, I. L., & Burdick, J. A. (2013) · Biomaterials · doi:10.1016/j.biomaterials.2013.08.089 · Cited by 337
Self-citationThiol–Ene Clickable Gelatin: A Platform Bioink for Multiple 3D Biofabrication Technologies
Bertlein, S., Brown, G., Lim, K. S., Jungst, T., Boeck, T., Blunk, T., Tessmar, J., Hooper, G. J., Woodfield, T. B. F., & Groll, J. (2017) · Advanced Materials · doi:10.1002/adma.201703404 · Cited by 331
Self-citationCostantini, M., Testa, S., Mozetic, P., Barbetta, A., Fuoco, C., Fornetti, E., Tamiro, F., Bernardini, S., Jaroszewicz, J., Święszkowski, W., et al. (2017) · Biomaterials · doi:10.1016/j.biomaterials.2017.03.026 · Cited by 330
Cramer, N. B., Reddy, S. K., O'Brien, A. K., & Bowman, C. N. (2003) · Macromolecules · doi:10.1021/ma034667s · Cited by 327
Levato, R., Webb, W. R., Otto, I. A., Mensinga, A., Zhang, Y., van Rijen, M., van Weeren, R., Khan, I. M., & Malda, J. (2017) · Acta Biomaterialia · doi:10.1016/j.actbio.2017.08.005 · Cited by 326
Inflammatory breast cancer biology: the tumour microenvironment is key
Lim, B., Woodward, W. A., Wang, X., Reuben, J. M., & Ueno, N. T. (2018) · Nature Reviews Cancer · doi:10.1038/s41568-018-0010-y · Cited by 326
In situ handheld three‐dimensional bioprinting for cartilage regeneration
Di Bella, C., Duchi, S., O'Connell, C. D., Blanchard, R., Augustine, C., Yue, Z., Thompson, F., Richards, C., Beirne, S., Onofrillo, C., et al. (2018) · Journal of Tissue Engineering and Regenerative Medicine · doi:10.1002/term.2476 · Cited by 313
Cure depth in photopolymerization: Experiments and theory
Lee, J. H., Prud'homme, R. K., & Aksay, I. A. (2001) · Journal of Materials Research · doi:10.1557/jmr.2001.0485 · Cited by 312
In vitro and in vivo analysis of visible light crosslinkable gelatin methacryloyl (GelMA) hydrogels
Noshadi, I., Hong, S., Sullivan, K. E., Shirzaei Sani, E., Portillo-Lara, R., Tamayol, A., Shin, S. R., Gao, A. E., Stoppel, W. L., Black III, L. D., et al. (2017) · Biomaterials Science · doi:10.1039/c7bm00110j · Cited by 308
Development of a clay based bioink for 3D cell printing for skeletal application
Ahlfeld, T., Cidonio, G., Kilian, D., Duin, S., Akkineni, A. R., Dawson, J. I., Yang, S., Lode, A., Oreffo, R. O. C., & Gelinsky, M. (2017) · Biofabrication · doi:10.1088/1758-5090/aa7e96 · Cited by 301
3D bioprinted functional and contractile cardiac tissue constructs
Wang, Z., Lee, S. J., Cheng, H.-J., Yoo, J. J., & Atala, A. (2018) · Acta Biomaterialia · doi:10.1016/j.actbio.2018.02.007 · Cited by 298
The role of pore size on vascularization and tissue remodeling in PEG hydrogels
Chiu, Y.-C., Cheng, M.-H., Engel, H., Kao, S.-W., Larson, J. C., Gupta, S., & Brey, E. M. (2011) · Biomaterials · doi:10.1016/j.biomaterials.2011.04.066 · Cited by 297
Bio-resin for high resolution lithography-based biofabrication of complex cell-laden constructs
Lim, K. S., Levato, R., Costa, P. F., Castilho, M. D., Alcala-Orozco, C. R., van Dorenmalen, K. M. A., Melchels, F. P. W., Gawlitta, D., Hooper, G. J., Malda, J., et al. (2018) · Biofabrication · doi:10.1088/1758-5090/aac00c · Cited by 296
Self-citationKesti, M., Müller, M., Becher, J., Schnabelrauch, M., D’Este, M., Eglin, D., & Zenobi-Wong, M. (2015) · Acta Biomaterialia · doi:10.1016/j.actbio.2014.09.033 · Cited by 294
Rodell, C. B., Dusaj, N. N., Highley, C. B., & Burdick, J. A. (2016) · Advanced Materials · doi:10.1002/adma.201602268 · Cited by 291
Self-citationWang, L. L., Highley, C. B., Yeh, Y., Galarraga, J. H., Uman, S., & Burdick, J. A. (2018) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.36323 · Cited by 286
Self-citationMa, X., Yu, C., Wang, P., Xu, W., Wan, X., Lai, C. S. E., Liu, J., Koroleva-Maharajh, A., & Chen, S. (2018) · Biomaterials · doi:10.1016/j.biomaterials.2018.09.026 · Cited by 281
Hyaluronic Acid and Dextran-Based Semi-IPN Hydrogels as Biomaterials for Bioprinting
Pescosolido, L., Schuurman, W., Malda, J., Matricardi, P., Alhaique, F., Coviello, T., van Weeren, P. R., Dhert, W. J. A., Hennink, W. E., & Vermonden, T. (2011) · Biomacromolecules · doi:10.1021/bm200178w · Cited by 280
Self-assembled micro-organogels for 3D printing silicone structures
O’Bryan, C. S., Bhattacharjee, T., Hart, S., Kabb, C. P., Schulze, K. D., Chilakala, I., Sumerlin, B. S., Sawyer, W. G., & Angelini, T. E. (2017) · Science Advances · doi:10.1126/sciadv.1602800 · Cited by 277
O’Connell, C. D., Di Bella, C., Thompson, F., Augustine, C., Beirne, S., Cornock, R., Richards, C. J., Chung, J., Gambhir, S., Yue, Z., et al. (2016) · Biofabrication · doi:10.1088/1758-5090/8/1/015019 · Cited by 274
Clickable PEG hydrogel microspheres as building blocks for 3D bioprinting
Xin, S., Chimene, D., Garza, J. E., Gaharwar, A. K., & Alge, D. L. (2019) · Biomaterials Science · doi:10.1039/c8bm01286e · Cited by 263
Xu, W., Molino, B. Z., Cheng, F., Molino, P. J., Yue, Z., Su, D., Wang, X., Willför, S., Xu, C., & Wallace, G. G. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b21268 · Cited by 263
Thiol/ene photocurable polymers
Morgan, C. R., Magnotta, F., & Ketley, A. D. (1977) · Journal of Polymer Science: Polymer Chemistry Edition · doi:10.1002/pol.1977.170150311 · Cited by 256
Two-photon polymerization for biological applications
Nguyen, A. K., & Narayan, R. J. (2017) · Materials Today · doi:10.1016/j.mattod.2017.06.004 · Cited by 256
Bejleri, D., Streeter, B. W., Nachlas, A. L. Y., Brown, M. E., Gaetani, R., Christman, K. L., & Davis, M. E. (2018) · Advanced Healthcare Materials · doi:10.1002/adhm.201800672 · Cited by 255
A review on fabricating tissue scaffolds using vat photopolymerization
Chartrain, N. A., Williams, C. B., & Whittington, A. R. (2018) · Acta Biomaterialia · doi:10.1016/j.actbio.2018.05.010 · Cited by 253
Lim, K. S., Klotz, B. J., Lindberg, G. C. J., Melchels, F. P. W., Hooper, G. J., Malda, J., Gawlitta, D., & Woodfield, T. B. F. (2019) · Macromolecular Bioscience · doi:10.1002/mabi.201900098 · Cited by 247
Self-citationCruise, G. M., Hegre, O. D., Scharp, D. S., & Hubbell, J. A. (1998) · Biotechnology and Bioengineering · Cited by 245
Zhai, X., Ma, Y., Hou, C., Gao, F., Zhang, Y., Ruan, C., Pan, H., Lu, W. W., & Liu, W. (2017) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.7b00224 · Cited by 243
Shaping organisms with apoptosis
Suzanne, M., & Steller, H. (2013) · Cell Death & Differentiation · doi:10.1038/cdd.2013.11 · Cited by 242
3D printing of complex GelMA-based scaffolds with nanoclay
Gao, Q., Niu, X., Shao, L., Zhou, L., Lin, Z., Sun, A., Fu, J., Chen, Z., Hu, J., Liu, Y., et al. (2019) · Biofabrication · doi:10.1088/1758-5090/ab0cf6 · Cited by 242
Complex 3D‐Printed Microchannels within Cell‐Degradable Hydrogels
Song, K. H., Highley, C. B., Rouff, A., & Burdick, J. A. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201801331 · Cited by 241
Self-citation3D printing of biomimetic microstructures for cancer cell migration
Huang, T. Q., Qu, X., Liu, J., & Chen, S. (2014) · Biomedical Microdevices · doi:10.1007/s10544-013-9812-6 · Cited by 237
3D Bioprinting for Vascularized Tissue Fabrication
Richards, D., Jia, J., Yost, M., Markwald, R., & Mei, Y. (2017) · Annals of Biomedical Engineering · doi:10.1007/s10439-016-1653-z · Cited by 234
Optimization of collagen type I-hyaluronan hybrid bioink for 3D bioprinted liver microenvironments
Mazzocchi, A., Devarasetty, M., Huntwork, R., Soker, S., & Skardal, A. (2018) · Biofabrication · doi:10.1088/1758-5090/aae543 · Cited by 226
Development and characterisation of a new bioink for additive tissue manufacturing
Melchels, F. P. W., Dhert, W. J. A., Hutmacher, D. W., & Malda, J. (2014) · Journal of Materials Chemistry B · doi:10.1039/c3tb21280g · Cited by 222
Handheld co-axial bioprinting: application to in situ surgical cartilage repair
Duchi, S., Onofrillo, C., O’Connell, C. D., Blanchard, R., Augustine, C., Quigley, A. F., Kapsa, R. M. I., Pivonka, P., Wallace, G., Di Bella, C., et al. (2017) · Scientific Reports · doi:10.1038/s41598-017-05699-x · Cited by 219
Combinatorial hydrogels with biochemical gradients for screening 3D cellular microenvironments
Vega, S. L., Kwon, M. Y., Song, K. H., Wang, C., Mauck, R. L., Han, L., & Burdick, J. A. (2018) · Nature Communications · doi:10.1038/s41467-018-03021-5 · Cited by 218
Self-citationVisible light photoinitiation of mesenchymal stem cell-laden bioresponsive hydrogels
Oregon Health & Science University, D. O. O. &. R., Bahney, C., Lujan, T., Hsu, C., Bottlang, M., West, J., & Johnstone, B. (2011) · European Cells and Materials · doi:10.22203/ecm.v022a04 · Cited by 213
Bioactive site-specifically modified proteins for 4D patterning of gel biomaterials
Shadish, J. A., Benuska, G. M., & DeForest, C. A. (2019) · Nature Materials · doi:10.1038/s41563-019-0367-7 · Cited by 211
Recent Advances in Enabling Technologies in 3D Printing for Precision Medicine
Prendergast, M. E., & Burdick, J. A. (2020) · Advanced Materials · doi:10.1002/adma.201902516 · Cited by 209
Self-citationDigital microfabrication of user‐defined 3D microstructures in cell‐laden hydrogels
Soman, P., Chung, P. H., Zhang, A. P., & Chen, S. (2013) · Biotechnology and Bioengineering · doi:10.1002/bit.24957 · Cited by 207
3D bioprinting of liver-mimetic construct with alginate/cellulose nanocrystal hybrid bioink
Wu, Y., Lin, Z. Y. (., Wenger, A. C., Tam, K. C., & Tang, X. (. (2018) · Bioprinting · doi:10.1016/j.bprint.2017.12.001 · Cited by 207
Stereolithography of spatially controlled multi-material bioactive poly(ethylene glycol) scaffolds
Arcaute, K., Mann, B., & Wicker, R. (2010) · Acta Biomaterialia · doi:10.1016/j.actbio.2009.08.017 · Cited by 205
Characterization of hydrogels formed from acrylate modified poly(vinyl alcohol) macromers
Martens, P., & Anseth, K. S. (2000) · Polymer · doi:10.1016/s0032-3861(00)00123-3 · Cited by 205
Methods for Photocrosslinking Alginate Hydrogel Scaffolds with High Cell Viability
Rouillard, A. D., Berglund, C. M., Lee, J. Y., Polacheck, W. J., Tsui, Y., Bonassar, L. J., & Kirby, B. J. (2011) · Tissue Engineering Part C: Methods · doi:10.1089/ten.tec.2009.0582 · Cited by 200
Zhai, X., Ruan, C., Ma, Y., Cheng, D., Wu, M., Liu, W., Zhao, X., Pan, H., & Lu, W. W. (2018) · Advanced Science · doi:10.1002/advs.201700550 · Cited by 199
Photopolymers for rapid prototyping
Liska, R., Schuster, M., Inführ, R., Turecek, C., Fritscher, C., Seidl, B., Schmidt, V., Kuna, L., Haase, A., Varga, F., et al. (2007) · Journal of Coatings Technology and Research · doi:10.1007/s11998-007-9059-3 · Cited by 197
O'Connell, C. D., Zhang, B., Onofrillo, C., Duchi, S., Blanchard, R., Quigley, A., Bourke, J., Gambhir, S., Kapsa, R., Di Bella, C., et al. (2018) · Soft Matter · doi:10.1039/c7sm02187a · Cited by 196
Kwon, M. Y., Wang, C., Galarraga, J. H., Puré, E., Han, L., & Burdick, J. A. (2019) · Biomaterials · doi:10.1016/j.biomaterials.2019.119451 · Cited by 194
Self-citation3D bioprinting for cardiovascular regeneration and pharmacology
Cui, H., Miao, S., Esworthy, T., Zhou, X., Lee, S.-J., Liu, C., Yu, Z.-X., Fisher, J. P., Mohiuddin, M., & Zhang, L. G. (2018) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2018.07.014 · Cited by 193
Osteogenic and angiogenic tissue formation in high fidelity nanocomposite Laponite-gelatin bioinks
Cidonio, G., Alcala-Orozco, C. R., Lim, K. S., Glinka, M., Mutreja, I., Kim, Y.-H., Dawson, J. I., Woodfield, T. B. F., & Oreffo, R. O. C. (2019) · Biofabrication · doi:10.1088/1758-5090/ab19fd · Cited by 190
Self-citationA highly elastic tissue sealant based on photopolymerised gelatin
Elvin, C. M., Vuocolo, T., Brownlee, A. G., Sando, L., Huson, M. G., Liyou, N. E., Stockwell, P. R., Lyons, R. E., Kim, M., Edwards, G. A., et al. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.07.032 · Cited by 189
Biodegradable and photocrosslinkable polyphosphoester hydrogel
Li, Q., Wang, J., Shahani, S., Sun, D. D. N., Sharma, B., Elisseeff, J. H., & Leong, K. W. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2005.07.019 · Cited by 189
3D printing of biomimetic multi-layered GelMA/nHA scaffold for osteochondral defect repair
Liu, J., Li, L., Suo, H., Yan, M., Yin, J., & Fu, J. (2019) · Materials & Design · doi:10.1016/j.matdes.2019.107708 · Cited by 186
Rapid photopolymerization of immunoprotective gels in contact with cells and tissue
Pathak, C. P., Sawhney, A. S., & Hubbell, J. A. (1992) · Journal of the American Chemical Society · doi:10.1021/ja00047a065 · Cited by 183
Suntornnond, R., Tan, E. Y. S., An, J., & Chua, C. K. (2017) · Scientific Reports · doi:10.1038/s41598-017-17198-0 · Cited by 183
Patterning hydrogels in three dimensions towards controlling cellular interactions
Khetan, S., & Burdick, J. A. (2011) · Soft Matter · doi:10.1039/c0sm00852d · Cited by 173
Self-citationInjectable shear-thinning nanoengineered hydrogels for stem cell delivery
Thakur, A., Jaiswal, M. K., Peak, C. W., Carrow, J. K., Gentry, J., Dolatshahi-Pirouz, A., & Gaharwar, A. K. (2016) · Nanoscale · doi:10.1039/c6nr02299e · Cited by 173
A Printable Photopolymerizable Thermosensitive p(HPMAm‐lactate)‐PEG Hydrogel for Tissue Engineering
Censi, R., Schuurman, W., Malda, J., di Dato, G., Burgisser, P. E., Dhert, W. J. A., van Nostrum, C. F., di Martino, P., Vermonden, T., & Hennink, W. E. (2011) · Advanced Functional Materials · doi:10.1002/adfm.201002428 · Cited by 171
Liquid-like Solids Support Cells in 3D
Bhattacharjee, T., Gil, C. J., Marshall, S. L., Urueña, J. M., O’Bryan, C. S., Carstens, M., Keselowsky, B., Palmer, G. D., Ghivizzani, S., Gibbs, C. P., et al. (2016) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.6b00218 · Cited by 165
Bioprinting Perfusion-Enabled Liver Equivalents for Advanced Organ-on-a-Chip Applications
Grix, T., Ruppelt, A., Thomas, A., Amler, A.-K., Noichl, B. P., Lauster, R., & Kloke, L. (2018) · Genes · doi:10.3390/genes9040176 · Cited by 165
Heller, C., Schwentenwein, M., Russmueller, G., Varga, F., Stampfl, J., & Liska, R. (2009) · Journal of Polymer Science Part A: Polymer Chemistry · doi:10.1002/pola.23734 · Cited by 163
3D bioprinting via an in situ crosslinking technique towards engineering cartilage tissue
Galarraga, J. H., Kwon, M. Y., & Burdick, J. A. (2019) · Scientific Reports · doi:10.1038/s41598-019-56117-3 · Cited by 163
Self-citationMajima, T., Schnabel, W., & Weber, W. (1991) · Die Makromolekulare Chemie · doi:10.1002/macp.1991.021921010 · Cited by 161
Rapid Photocrosslinking of Silk Hydrogels with High Cell Density and Enhanced Shape Fidelity
Cui, X., Soliman, B. G., Alcala‐Orozco, C. R., Li, J., Vis, M. A. M., Santos, M., Wise, S. G., Levato, R., Malda, J., Woodfield, T. B. F., et al. (2020) · Advanced Healthcare Materials · doi:10.1002/adhm.201901667 · Cited by 159
Self-citation3D bioprinting of a hyaluronan bioink through enzymatic-and visible light-crosslinking
Petta, D., Armiento, A. R., Grijpma, D., Alini, M., Eglin, D., & D’Este, M. (2018) · Biofabrication · doi:10.1088/1758-5090/aadf58 · Cited by 158
3D Bioprinting of Breast Cancer Models for Drug Resistance Study
Wang, Y., Shi, W., Kuss, M., Mirza, S., Qi, D., Krasnoslobodtsev, A., Zeng, J., Band, H., Band, V., & Duan, B. (2018) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.8b01277 · Cited by 157
Protease-degradable electrospun fibrous hydrogels
Wade, R. J., Bassin, E. J., Rodell, C. B., & Burdick, J. A. (2015) · Nature Communications · doi:10.1038/ncomms7639 · Cited by 157
Self-citationZhang, W., Wray, L. S., Rnjak‐Kovacina, J., Xu, L., Zou, D., Wang, S., Zhang, M., Dong, J., Li, G., Kaplan, D. L., et al. (2015) · Biomaterials · doi:10.1016/j.biomaterials.2015.03.053 · Cited by 156
3D bioprinting: improving in vitro models of metastasis with heterogeneous tumor microenvironments
Albritton, J. L., & Miller, J. S. (2017) · Disease Models & Mechanisms · doi:10.1242/dmm.025049 · Cited by 154
Covalent incorporation of non-chemically modified gelatin into degradable PVA-tyramine hydrogels
Lim, K. S., Alves, M.-H., Poole-Warren, L. A., & Martens, P. J. (2013) · Biomaterials · doi:10.1016/j.biomaterials.2013.06.005 · Cited by 152
Self-citation3D bioprinting of BMSC-laden methacrylamide gelatin scaffolds with CBD-BMP2-collagen microfibers
Du, M., Chen, B., Meng, Q., Liu, S., Zheng, X., Zhang, C., Wang, H., Li, H., Wang, N., & Dai, J. (2015) · Biofabrication · doi:10.1088/1758-5090/7/4/044104 · Cited by 152
Hiller, T., Berg, J., Elomaa, L., Röhrs, V., Ullah, I., Schaar, K., Dietrich, A.-C., Al‐Zeer, M. A., Kurtz, A., Hocke, A. C., et al. (2018) · International Journal of Molecular Sciences · doi:10.3390/ijms19103129 · Cited by 152
High-aspect 3D two-photon polymerization structuring with widened objective working range (WOW-2PP)
Obata, K., El-Tamer, A., Koch, L., Hinze, U., & Chichkov, B. N. (2013) · Light Science & Applications · doi:10.1038/lsa.2013.72 · Cited by 150
Dynamic Coordination Chemistry Enables Free Directional Printing of Biopolymer Hydrogel
Shi, L., Carstensen, H., Hölzl, K., Lunzer, M., Li, H., Hilborn, J. G., Ovsianikov, A., & Ossipov, D. A. (2017) · Chemistry of Materials · doi:10.1021/acs.chemmater.7b00128 · Cited by 148
Coaxial bioprinting of cell-laden vascular constructs using a gelatin–tyramine bioink
Hong, S., Kim, J. S., Jung, B.-Y., Won, C. H., & Hwang, C. (2019) · Biomaterials Science · doi:10.1039/c8bm00618k · Cited by 148
Zhuang, P., Ng, W. L., An, J., Chua, C. K., & Tan, L. P. (2019) · PLoS ONE · doi:10.1371/journal.pone.0216776 · Cited by 147
Yang, F., Tadepalli, V. R., & Wiley, B. J. (2017) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.7b00094 · Cited by 145
Additive manufacturing of photosensitive hydrogels for tissue engineering applications
Qin, X., Ovsianikov, A., Stampfl, J., & Liska, R. (2014) · BioNanoMaterials · doi:10.1515/bnm-2014-0008 · Cited by 142
Coumarin-Based Photodegradable Hydrogel: Design, Synthesis, Gelation, and Degradation Kinetics
Azagarsamy, M. A., McKinnon, D. D., Alge, D. L., & Anseth, K. S. (2014) · ACS Macro Letters · doi:10.1021/mz500230p · Cited by 139
Thiol–Gelatin–Norbornene Bioink for Laser‐Based High‐Definition Bioprinting
Dobos, A., Hoorick, J. V., Steiger, W., Gruber, P., Marković, M., Andriotis, O. G., Rohatschek, A., Dubruel, P., Thurner, P. J., Vlierberghe, S. V., et al. (2019) · Advanced Healthcare Materials · doi:10.1002/adhm.201900752 · Cited by 139
Goulart, E., de Caires-Junior, L. C., Telles-Silva, K. A., Araújo, B. H. S., Rocco, S. A., Sforça, M. L., de Sousa, I. L., Kobayashi, G. S., Musso, C. M., Assoni, A. F., et al. (2019) · Biofabrication · doi:10.1088/1758-5090/ab4a30 · Cited by 136
Stereolithography‐Based Hydrogel Microenvironments to Examine Cellular Interactions
Zorlutuna, P., Jeong, J. H., Kong, H., & Bashir, R. (2011) · Advanced Functional Materials · doi:10.1002/adfm.201101023 · Cited by 135
Abbadessa, A., Blokzijl, M. M., Mouser, V. H. M., Marica, P., Malda, J., Hennink, W. E., & Vermonden, T. (2016) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2016.04.080 · Cited by 135
Abbadessa, A., Mouser, V. H. M., Blokzijl, M. M., Gawlitta, D., Dhert, W. J. A., Hennink, W. E., Malda, J., & Vermonden, T. (2016) · Biomacromolecules · doi:10.1021/acs.biomac.6b00366 · Cited by 135
Elomaa, L., Pan, C., Shanjani, Y., Malkovskiy, A. V., Seppälä, J. V., & Yang, Y. (2015) · Journal of Materials Chemistry B · doi:10.1039/c5tb01468a · Cited by 131
Fancy, D. A., Denison, C., Kim, K., Xie, Y., Holdeman, T. C., Amini, F., & Kodadek, T. J. (2000) · Chemistry & Biology · doi:10.1016/s1074-5521(00)00020-x · Cited by 127
Spikes, J. D., Shen, H., Kopečková, P., & Kopec̆ek, J. (1999) · Photochemistry and Photobiology · doi:10.1111/j.1751-1097.1999.tb07980.x · Cited by 127
Mouser, V. H. M., Abbadessa, A., Levato, R., Hennink, W. E., Vermonden, T., Gawlitta, D., & Malda, J. (2017) · Biofabrication · doi:10.1088/1758-5090/aa6265 · Cited by 126
3D Cell Printed Tissue Analogues: A New Platform for Theranostics
Choi, Y., Yi, H., Kim, S.-W., & Cho, D. (2017) · Theranostics · doi:10.7150/thno.19396 · Cited by 126
Occhetta, P., Visone, R., Russo, L., Cipolla, L., Moretti, M., & Rasponi, M. (2014) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.35346 · Cited by 123
Photodegradable Hydrogels to Generate Positive and Negative Features over Multiple Length Scales
Wong, D. Y., Griffin, D. R., Reed, J. C., & Kasko, A. M. (2010) · Macromolecules · doi:10.1021/ma9023679 · Cited by 121
The Spectral Dependence for UVA-Induced Cumulative Damage in Human Skin
Lavker, R. M., & Kaidbey, K. H. (1997) · Journal of Investigative Dermatology · doi:10.1111/1523-1747.ep12285613 · Cited by 119
Quantitative criteria to benchmark new and existing bio-inks for cell compatibility
Dubbin, K., Tabet, A., & Heilshorn, S. C. (2017) · Biofabrication · doi:10.1088/1758-5090/aa869f · Cited by 119
Foster, A. J., Chouhan, B., Regan, S. L., Rollison, H., Amberntsson, S., Andersson, L. C., Srivastava, A., Darnell, M., Cairns, J., Lazic, S. E., et al. (2019) · Archives of Toxicology · doi:10.1007/s00204-019-02427-4 · Cited by 117
Stiffness of photocrosslinked RGD‐alginate gels regulates adipose progenitor cell behavior
Chandler, E. M., Berglund, C. M., Lee, J. S., Polacheck, W. J., Gleghorn, J. P., Kirby, B. J., & Fischbach, C. (2011) · Biotechnology and Bioengineering · doi:10.1002/bit.23079 · Cited by 113
Extrusion-Based 3D Printing of Poly(propylene fumarate) in a Full-Factorial Design
Trachtenberg, J. E., Placone, J. K., Smith, B. T., Piard, C., Santoro, M., Scott, D. W., Fisher, J. P., & Mikos, A. G. (2016) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.6b00026 · Cited by 113
Cited by
Printability and shape fidelity of bioinks in 3D bioprinting
Schwab, A., Levato, R., D’Este, M., Piluso, S., Eglin, D., & Malda, J. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00084 · Cited by 1,359
Chemically Modified Biopolymers for the Formation of Biomedical Hydrogels
Muir, V. G., & Burdick, J. A. (2021) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00923 · Cited by 604
Self-citationCrosslinking Strategies for 3D Bioprinting of Polymeric Hydrogels
GhavamiNejad, A., Ashammakhi, N., Wu, X. Y., & Khademhosseini, A. (2020) · Small · doi:10.1002/smll.202002931 · Cited by 400
Vat photopolymerization 3D printing for advanced drug delivery and medical device applications
Xu, X., Awad, A., Robles-Martinez, P., Gaisford, S., Goyanes, A., & Basit, A. W. (2021) · Journal of Controlled Release · doi:10.1016/j.jconrel.2020.10.008 · Cited by 370
3D-printed self-healing hydrogels via Digital Light Processing
Caprioli, M., Roppolo, I., Chiappone, A., Larush, L., Pirri, C. F., & Magdassi, S. (2021) · Nature Communications · doi:10.1038/s41467-021-22802-z · Cited by 335
Metadata
- Authors
- Lim, K. S., Galarraga, J. H., Cui, X., Lindberg, G. C. J., Burdick, J. A., & Woodfield, T. B. F.
- Venue
- Chemical Reviews
- Publisher
- American Chemical Society (ACS)
- Published
- 2020-04-17
- Volume
- 120
- Issue
- 19
- Pages
- 10662-10694
- ISSN
- 0009-2665 (ISSN-L)
- 1520-6890
- OpenAlex
- W3017274890
- Cited by
- 416
- References
- 242
- FWCI
- 5.64
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.