The DOI matches its Crossref record; 239 of the 239 references it cites were found in a registry or an index.
3D bioprinting of functional tissue models for personalized drug screening and in vitro disease modeling
Open accessAbstract
3D bioprinting is emerging as a promising technology for fabricating complex tissue constructs with tailored biological components and mechanical properties. Recent advances have enabled scientists to precisely position materials and cells to build functional tissue models for in vitro drug screening and disease modeling. This review presents state-of-the-art 3D bioprinting techniques and discusses the choice of cell source and biomaterials for building functional tissue models that can be used for personalized drug screening and disease modeling. In particular, we focus on 3D-bioprinted liver models, cardiac tissues, vascularized constructs, and cancer models for their promising applications in medical research, drug discovery, toxicology, and other pre-clinical studies.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
3D bioprinting of tissues and organs
Murphy, S. V., & Atala, A. (2014) · Nature Biotechnology · doi:10.1038/nbt.2958 · Cited by 7,034
Heart Disease and Stroke Statistics—2015 Update: A Report From the American Heart Association
Mozaffarian, D., Benjamin, E. J., Go, A. S., Arnett, D. K., Blaha, M. J., Cushman, M., de Ferranti, S., Després, J.-P., Fullerton, H. J., Howard, V. J., et al. (2015) · Circulation · doi:10.1161/cir.0000000000000152 · Cited by 5,797
Tarver, T. (2014) · Journal of Consumer Health On the Internet · doi:10.1080/15398285.2014.902284 · Cited by 5,605
Bataller, R., & Brenner, D. A. (2005) · Journal of Clinical Investigation · doi:10.1172/jci24282 · Cited by 4,958
A Perspective on Cancer Cell Metastasis
Chaffer, C. L., & Weinberg, R. A. (2011) · Science · doi:10.1126/science.1203543 · Cited by 4,807
Nonlinear magic: multiphoton microscopy in the biosciences
Zipfel, W. R., Williams, R. M., & Webb, W. W. (2003) · Nature Biotechnology · doi:10.1038/nbt899 · Cited by 3,893
An overview of tissue and whole organ decellularization processes
Crapo, P. M., Gilbert, T. W., & Badylak, S. F. (2011) · Biomaterials · doi:10.1016/j.biomaterials.2011.01.057 · Cited by 3,591
A 3D bioprinting system to produce human-scale tissue constructs with structural integrity
Kang, H.-W., Lee, S. J., Ko, I. K., Kengla, C., Yoo, J. J., & Atala, A. (2016) · Nature Biotechnology · doi:10.1038/nbt.3413 · Cited by 2,622
Two-photon polymerization initiators for three-dimensional optical data storage and microfabrication
Cumpston, B. H., Ananthavel, S. P., Barlow, S., Dyer, D. L., Ehrlich, J. E., Erskine, L. L., Heikal, A. A., Kuebler, S. M., Lee, I.-Y. S., McCord-Maughon, D., et al. (1999) · Nature · doi:10.1038/17989 · Cited by 2,232
3D bioprinting of vascularized, heterogeneous cell-laden tissue constructs
Kolesky, D. B., Truby, R. L., Gladman, A. S., Busbee, T. A., Homan, K. A., & Lewis, J. A. (2014) · Advanced Materials · doi:10.1002/adma.201305506 · Cited by 2,102
Rapid casting of patterned vascular networks for perfusable engineered three-dimensional tissues
Miller, J. S., Stevens, K. R., Yang, M. T., Baker, B. M., Nguyen, D.-H. T., Cohen, D. M., Toro, E., Chen, A. A., Galie, P. A., Yu, X., et al. (2012) · Nature Materials · doi:10.1038/nmat3357 · Cited by 1,917
Printing three-dimensional tissue analogues with decellularized extracellular matrix bioink
Pati, F., Jang, J., Ha, D.-H., Won Kim, S., Rhie, J.-W., Shim, J.-H., Kim, D.-H., & Cho, D.-W. (2014) · Nature Communications · doi:10.1038/ncomms4935 · Cited by 1,904
Use of NeuroEyeCoach™ to Improve Eye Movement Efficacy in Patients with Homonymous Visual Field Loss
Sahraie, A., Smania, N., & Zihl, J. (2016) · BioMed Research International · doi:10.1155/2016/5186461 · Cited by 1,772
Polymeric system for dual growth factor delivery
Richardson, T. P., Peters, M. C., Ennett, A. B., & Mooney, D. J. (2001) · Nature Biotechnology · doi:10.1038/nbt1101-1029 · Cited by 1,752
Patra, P. P., Chikkaraddy, R., Tripathi, R. P. N., Dasgupta, A., & Kumar, G. V. P. (2014) · Nature Communications · doi:10.1038/ncomms5357 · Cited by 1,635
Printing soft matter in three dimensions
Truby, R. L., & Lewis, J. A. (2016) · Nature · doi:10.1038/nature21003 · Cited by 1,622
Current advances and future perspectives in extrusion-based bioprinting
Ozbolat, I. T., & Hospodiuk, M. (2016) · Biomaterials · doi:10.1016/j.biomaterials.2015.10.076 · Cited by 1,572
Markstedt, K., Mantas, A., Tournier, I., Martínez Ávila, H., Hägg, D., & Gatenholm, P. (2015) · Biomacromolecules · doi:10.1021/acs.biomac.5b00188 · Cited by 1,528
Three-dimensional bioprinting of thick vascularized tissues
Kolesky, D. B., Homan, K. A., Skylar-Scott, M. A., & Lewis, J. A. (2016) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1521342113 · Cited by 1,492
Bioactive modification of poly (ethylene glycol) hydrogels for tissue engineering
Zhu, J. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.02.044 · Cited by 1,457
Engineering vascularized skeletal muscle tissue
Levenberg, S., Rouwkema, J., Macdonald, M., Garfein, E. S., Kohane, D. S., Darland, D. C., Marini, R., van Blitterswijk, C. A., Mulligan, R. C., D'Amore, P. A., et al. (2005) · Nature Biotechnology · doi:10.1038/nbt1109 · Cited by 1,293
Microscale culture of human liver cells for drug development
Khetani, S. R., & Bhatia, S. N. (2008) · Nature Biotechnology · doi:10.1038/nbt1361 · Cited by 1,219
Bioink properties before, during and after 3D bioprinting
Hölzl, K., Lin, S., Tytgat, L., Van Vlierberghe, S., Gu, L., & Ovsianikov, A. (2016) · Biofabrication · doi:10.1088/1758-5090/8/3/032002 · Cited by 1,070
Vascularization is the key challenge in tissue engineering
Novosel, E. C., Kleinhans, C., & Kluger, P. J. (2011) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2011.03.004 · Cited by 1,062
Idiosyncratic drug hepatotoxicity
Kaplowitz, N. (2005) · Nature Reviews Drug Discovery · doi:10.1038/nrd1750 · Cited by 1,054
Ouyang, L., Yao, R., Zhao, Y., & Sun, W. (2016) · Biofabrication · doi:10.1088/1758-5090/8/3/035020 · Cited by 1,045
Direct 3D Printing of Shear‐Thinning Hydrogels into Self‐Healing Hydrogels
Highley, C. B., Rodell, C. B., & Burdick, J. A. (2015) · Advanced Materials · doi:10.1002/adma.201501234 · Cited by 1,043
Bioprinting 3D microfibrous scaffolds for engineering endothelialized myocardium and heart-on-a-chip
Zhang, Y. S., Arneri, A., Bersini, S., Shin, S.-R., Zhu, K., Goli-Malekabadi, Z., Aleman, J., Colosi, C., Busignani, F., Dell'Erba, V., et al. (2016) · Biomaterials · doi:10.1016/j.biomaterials.2016.09.003 · Cited by 951
Paxton, N., Smolan, W., Böck, T., Melchels, F., Groll, J., & Jungst, T. (2017) · Biofabrication · doi:10.1088/1758-5090/aa8dd8 · Cited by 950
Hydrogel bioprinted microchannel networks for vascularization of tissue engineering constructs
Bertassoni, L. E., Cecconi, M., Manoharan, V., Nikkhah, M., Hjortnaes, J., Cristino, A. L., Barabaschi, G., Demarchi, D., Dokmeci, M. R., Yang, Y., et al. (2014) · Lab Chip · doi:10.1039/c4lc00030g · Cited by 944
Direct 3D bioprinting of perfusable vascular constructs using a blend bioink
Jia, W., Gungor-Ozkerim, P. S., Zhang, Y. S., Yue, K., Zhu, K., Liu, W., Pi, Q., Byambaa, B., Dokmeci, M. R., Shin, S. R., et al. (2016) · Biomaterials · doi:10.1016/j.biomaterials.2016.07.038 · Cited by 922
Deterministically patterned biomimetic human iPSC-derived hepatic model via rapid 3D bioprinting
Ma, X., Qu, X., Zhu, W., Li, Y.-S., Yuan, S., Zhang, H., Liu, J., Wang, P., Lai, C. S. E., Zanella, F., et al. (2016) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1524510113 · Cited by 872
Self-citationEngler, A. J., Carag-Krieger, C., Johnson, C. P., Raab, M., Tang, H.-Y., Speicher, D. W., Sanger, J. W., Sanger, J. M., & Discher, D. E. (2008) · Journal of Cell Science · doi:10.1242/jcs.029678 · Cited by 865
Instrumented cardiac microphysiological devices via multimaterial three-dimensional printing
Lind, J. U., Busbee, T. A., Valentine, A. D., Pasqualini, F. S., Yuan, H., Yadid, M., Park, S.-J., Kotikian, A., Nesmith, A. P., Campbell, P. H., et al. (2017) · Nature Materials · doi:10.1038/nmat4782 · Cited by 863
Microfluidic Bioprinting of Heterogeneous 3D Tissue Constructs Using Low‐Viscosity Bioink
Colosi, C., Shin, S. R., Manoharan, V., Massa, S., Costantini, M., Barbetta, A., Dokmeci, M. R., Dentini, M., & Khademhosseini, A. (2016) · Advanced Materials · doi:10.1002/adma.201503310 · Cited by 863
Three-Dimensional Cell Cultures in Drug Discovery and Development
Fang, Y., & Eglen, R. M. (2017) · SLAS Discovery · doi:10.1177/1087057117696795 · Cited by 849
3D printing of composite calcium phosphate and collagen scaffolds for bone regeneration
Inzana, J. A., Olvera, D., Fuller, S. M., Kelly, J. P., Graeve, O. A., Schwarz, E. M., Kates, S. L., & Awad, H. A. (2014) · Biomaterials · doi:10.1016/j.biomaterials.2014.01.064 · Cited by 840
3D printing of functional biomaterials for tissue engineering
Zhu, W., Ma, X., Gou, M., Mei, D., Zhang, K., & Chen, S. (2016) · Current Opinion in Biotechnology · doi:10.1016/j.copbio.2016.03.014 · Cited by 822
Self-citationHewitt, N. J., Gómez Lechón, M. J., Houston, J. B., Hallifax, D., Brown, H. S., Maurel, P., Kenna, J. G., Gustavsson, L., Lohmann, C., Skonberg, C., et al. (2007) · Drug Metabolism Reviews · doi:10.1080/03602530601093489 · Cited by 735
Creation of long-lasting blood vessels
Koike, N., Fukumura, D., Gralla, O., Au, P., Schechner, J. S., & Jain, R. K. (2004) · Nature · doi:10.1038/428138a · Cited by 701
The Epidemiology of Cirrhosis in the United States: A Population-based Study
Scaglione, S., Kliethermes, S., Cao, G., Shoham, D., Durazo, R., Luke, A., & Volk, M. L. (2015) · Journal of Clinical Gastroenterology · doi:10.1097/mcg.0000000000000208 · Cited by 683
In vitro and in vivo degradation of porous poly(dl-lactic-co-glycolic acid) foams
Lu, L., Peter, S. J., D. Lyman, M., Lai, H.-L., Leite, S. M., Tamada, J. A., Uyama, S., Vacanti, J. P., Langer, R., & Mikos, A. G. (2000) · Biomaterials · doi:10.1016/s0142-9612(00)00047-8 · Cited by 668
Applications of Alginate-Based Bioinks in 3D Bioprinting
Axpe, E., & Oyen, M. (2016) · International Journal of Molecular Sciences · doi:10.3390/ijms17121976 · Cited by 663
Wang, Z., Abdulla, R., Parker, B., Samanipour, R., Ghosh, S., & Kim, K. (2015) · Biofabrication · doi:10.1088/1758-5090/7/4/045009 · Cited by 633
Coaxial nozzle-assisted 3D bioprinting with built-in microchannels for nutrients delivery
Gao, Q., He, Y., Fu, J.-Z., Liu, A., & Ma, L. (2015) · Biomaterials · doi:10.1016/j.biomaterials.2015.05.031 · Cited by 630
A liver-on-a-chip platform with bioprinted hepatic spheroids
Bhise, N. S., Manoharan, V., Massa, S., Tamayol, A., Ghaderi, M., Miscuglio, M., Lang, Q., Shrike Zhang, Y., Shin, S. R., Calzone, G., et al. (2016) · Biofabrication · doi:10.1088/1758-5090/8/1/014101 · Cited by 615
Recent advances in bioprinting techniques: approaches, applications and future prospects
Li, J., Chen, M., Fan, X., & Zhou, H. (2016) · Journal of Translational Medicine · doi:10.1186/s12967-016-1028-0 · Cited by 608
Yin, J., Yan, M., Wang, Y., Fu, J., & Suo, H. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b16059 · Cited by 598
Zhang, B., Montgomery, M., Chamberlain, M. D., Ogawa, S., Korolj, A., Pahnke, A., Wells, L. A., Massé, S., Kim, J., Reis, L., et al. (2016) · Nature Materials · doi:10.1038/nmat4570 · Cited by 593
Thermal Inkjet Printing in Tissue Engineering and Regenerative Medicine
Cui, X., Boland, T., D.D'Lima, D., & K. Lotz, M. (2012) · Recent Patents on Drug Delivery & Formulation · doi:10.2174/187221112800672949 · Cited by 581
A Multimaterial Bioink Method for 3D Printing Tunable, Cell‐Compatible Hydrogels
Rutz, A. L., Hyland, K. E., Jakus, A. E., Burghardt, W. R., & Shah, R. N. (2015) · Advanced Materials · doi:10.1002/adma.201405076 · Cited by 572
Direct 3D bioprinting of prevascularized tissue constructs with complex microarchitecture
Zhu, W., Qu, X., Zhu, J., Ma, X., Patel, S., Liu, J., Wang, P., Lai, C. S. E., Gou, M., Xu, Y., et al. (2017) · Biomaterials · doi:10.1016/j.biomaterials.2017.01.042 · Cited by 567
Self-citationTissue engineering of vascularized cardiac muscle from human embryonic stem cells
Caspi, O., Lesman, A., Basevitch, Y., Gepstein, A., Arbel, G., Habib, I. H. M., Gepstein, L., & Levenberg, S. (2007) · Circulation Research · doi:10.1161/01.res.0000257776.05673.ff · Cited by 558
Animal‐cell culture media: History, characteristics, and current issues
Yao, T., & Asayama, Y. (2017) · Reproductive Medicine and Biology · doi:10.1002/rmb2.12024 · Cited by 536
Three-dimensional printing of Hela cells for cervical tumor model in vitro
Zhao, Y., Yao, R., Ouyang, L., Ding, H., Zhang, T., Zhang, K., Cheng, S., & Sun, W. (2014) · Biofabrication · doi:10.1088/1758-5082/6/3/035001 · Cited by 534
Naturally derived myocardial matrix as an injectable scaffold for cardiac tissue engineering
Singelyn, J. M., DeQuach, J. A., Seif-Naraghi, S. B., Littlefield, R. B., Schup-Magoffin, P. J., & Christman, K. L. (2009) · Biomaterials · doi:10.1016/j.biomaterials.2009.06.045 · Cited by 532
Laronda, M. M., Rutz, A. L., Xiao, S., Whelan, K. A., Duncan, F. E., Roth, E. W., Woodruff, T. K., & Shah, R. N. (2017) · Nature Communications · doi:10.1038/ncomms15261 · Cited by 527
Recent Advances in Biomaterials for 3D Printing and Tissue Engineering
Jammalamadaka, U., & Tappa, K. (2018) · Journal of Functional Biomaterials · doi:10.3390/jfb9010022 · Cited by 526
Controlled growth factor release from synthetic extracellular matrices
Lee, K. Y., Peters, M. C., Anderson, K. W., & Mooney, D. J. (2000) · Nature · doi:10.1038/35050141 · Cited by 505
Extrusion Bioprinting of Shear‐Thinning Gelatin Methacryloyl Bioinks
Liu, W., Heinrich, M. A., Zhou, Y., Akpek, A., Hu, N., Liu, X., Guan, X., Zhong, Z., Jin, X., Khademhosseini, A., et al. (2017) · Advanced Healthcare Materials · doi:10.1002/adhm.201601451 · Cited by 503
Recent Advances in Bioink Design for 3D Bioprinting of Tissues and Organs
Ji, S., & Guvendiren, M. (2017) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2017.00023 · Cited by 490
Wylie, R. G., Ahsan, S., Aizawa, Y., Maxwell, K. L., Morshead, C. M., & Shoichet, M. S. (2011) · Nature Materials · doi:10.1038/nmat3101 · Cited by 480
Ribeiro, A. J. S., Ang, Y.-S., Fu, J.-D., Rivas, R. N., Mohamed, T. M. A., Higgs, G. C., Srivastava, D., & Pruitt, B. L. (2015) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1508073112 · Cited by 479
4D printing smart biomedical scaffolds with novel soybean oil epoxidized acrylate
Miao, S., Zhu, W., Castro, N. J., Nowicki, M., Zhou, X., Cui, H., Fisher, J. P., & Zhang, L. G. (2016) · Scientific Reports · doi:10.1038/srep27226 · Cited by 477
Self-citationThe role of tumour-stromal interactions in modifying drug response: challenges and opportunities
McMillin, D. W., Negri, J. M., & Mitsiades, C. S. (2013) · Nature Reviews Drug Discovery · doi:10.1038/nrd3870 · Cited by 474
Biomaterials for Integration with 3-D Bioprinting
Skardal, A., & Atala, A. (2015) · Annals of Biomedical Engineering · doi:10.1007/s10439-014-1207-1 · Cited by 474
Faulkner-Jones, A., Fyfe, C., Cornelissen, D.-J., Gardner, J., King, J., Courtney, A., & Shu, W. (2015) · Biofabrication · doi:10.1088/1758-5090/7/4/044102 · Cited by 474
Farsari, M., & Chichkov, B. N. (2009) · Nature Photonics · doi:10.1038/nphoton.2009.131 · Cited by 466
Fabrication of 3D hepatic tissues by additive photopatterning of cellular hydrogels
Tsang, V. L., Chen, A. A., Cho, L. M., Jadin, K. D., Sah, R. L., DeLong, S., West, J. L., & Bhatia, S. N. (2007) · The FASEB Journal · doi:10.1096/fj.06-7117com · Cited by 462
Assessing bioink shape fidelity to aid material development in 3D bioprinting
Ribeiro, A., Blokzijl, M. M., Levato, R., Visser, C. W., Castilho, M., Hennink, W. E., Vermonden, T., & Malda, J. (2017) · Biofabrication · doi:10.1088/1758-5090/aa90e2 · Cited by 448
Keriquel, V., Oliveira, H., Rémy, M., Ziane, S., Delmond, S., Rousseau, B., Rey, S., Catros, S., Amédée, J., Guillemot, F., et al. (2017) · Scientific Reports · doi:10.1038/s41598-017-01914-x · Cited by 447
Perfused multiwell plate for 3D liver tissue engineering
Domansky, K., Inman, W., Serdy, J., Dash, A., Lim, M. H. M., & Griffith, L. G. (2010) · Lab Chip · doi:10.1039/b913221j · Cited by 444
Microfabricated tissue gauges to measure and manipulate forces from 3D microtissues
Legant, W. R., Pathak, A., Yang, M. T., Deshpande, V. S., McMeeking, R. M., & Chen, C. S. (2009) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.0900174106 · Cited by 434
Skardal, A., Devarasetty, M., Kang, H.-W., Mead, I., Bishop, C., Shupe, T., Lee, S. J., Jackson, J., Yoo, J., Soker, S., et al. (2015) · Acta Biomaterialia · doi:10.1016/j.actbio.2015.07.030 · Cited by 428
Cardiac Tissue Engineering: State of the Art
Hirt, M. N., Hansen, A., & Eschenhagen, T. (2014) · Circulation Research · doi:10.1161/circresaha.114.300522 · Cited by 425
Rapid Continuous Multimaterial Extrusion Bioprinting
Liu, W., Zhang, Y. S., Heinrich, M. A., De Ferrari, F., Jang, H. L., Bakht, S. M., Alvarez, M. M., Yang, J., Li, Y., Trujillo‐de Santiago, G., et al. (2017) · Advanced Materials · doi:10.1002/adma.201604630 · Cited by 424
Fluid shear stress threshold regulates angiogenic sprouting
Galie, P. A., Nguyen, D.-H. T., Choi, C. K., Cohen, D. M., Janmey, P. A., & Chen, C. S. (2014) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1310842111 · Cited by 421
Applications of 3D printing in cardiovascular diseases
Giannopoulos, A. A., Mitsouras, D., Yoo, S.-J., Liu, P. P., Chatzizisis, Y. S., & Rybicki, F. J. (2016) · Nature Reviews Cardiology · doi:10.1038/nrcardio.2016.170 · Cited by 421
A microfluidic 3D hepatocyte chip for drug toxicity testing
Toh, Y.-C., Lim, T. C., Tai, D., Xiao, G., van Noort, D., & Yu, H. (2009) · Lab on a Chip · doi:10.1039/b900912d · Cited by 419
Bioprinting three-dimensional cell-laden tissue constructs with controllable degradation
Wu, Z., Su, X., Xu, Y., Kong, B., Sun, W., & Mi, S. (2016) · Scientific Reports · doi:10.1038/srep24474 · Cited by 418
Bioprinted Osteogenic and Vasculogenic Patterns for Engineering 3D Bone Tissue
Byambaa, B., Annabi, N., Yue, K., Trujillo‐de Santiago, G., Alvarez, M. M., Jia, W., Kazemzadeh‐Narbat, M., Shin, S. R., Tamayol, A., & Khademhosseini, A. (2017) · Advanced Healthcare Materials · doi:10.1002/adhm.201700015 · Cited by 394
Mechanical behaviour of alginate-gelatin hydrogels for 3D bioprinting
Giuseppe, M. D., Law, N., Webb, B., A. Macrae, R., Liew, L. J., Sercombe, T. B., Dilley, R. J., & Doyle, B. J. (2018) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2017.12.018 · Cited by 394
Three-dimensional bioprinting of complex cell laden alginate hydrogel structures
Tabriz, A. G., Hermida, M. A., Leslie, N. R., & Shu, W. (2015) · Biofabrication · doi:10.1088/1758-5090/7/4/045012 · Cited by 393
Alginate Sulfate–Nanocellulose Bioinks for Cartilage Bioprinting Applications
Müller, M., Öztürk, E., Arlov, Ø., Gatenholm, P., & Zenobi-Wong, M. (2017) · Annals of Biomedical Engineering · doi:10.1007/s10439-016-1704-5 · Cited by 389
Freeform inkjet printing of cellular structures with bifurcations
Christensen, K., Xu, C., Chai, W., Zhang, Z., Fu, J., & Huang, Y. (2015) · Biotechnology and Bioengineering · doi:10.1002/bit.25501 · Cited by 351
Jang, J., Kim, T. G., Kim, B. S., Kim, S.-W., Kwon, S.-M., & Cho, D.-W. (2016) · Acta Biomaterialia · doi:10.1016/j.actbio.2016.01.013 · Cited by 344
Gao, G., Schilling, A. F., Hubbell, K., Yonezawa, T., Truong, D., Hong, Y., Dai, G., & Cui, X. (2015) · Biotechnology Letters · doi:10.1007/s10529-015-1921-2 · Cited by 341
Gao, G., Yonezawa, T., Hubbell, K., Dai, G., & Cui, X. (2015) · Biotechnology Journal · doi:10.1002/biot.201400635 · Cited by 340
Xu, F., Celli, J., Rizvi, I., Moon, S., Hasan, T., & Demirci, U. (2011) · Biotechnology Journal · doi:10.1002/biot.201000340 · Cited by 337
Thiol–Ene Clickable Gelatin: A Platform Bioink for Multiple 3D Biofabrication Technologies
Bertlein, S., Brown, G., Lim, K. S., Jungst, T., Boeck, T., Blunk, T., Tessmar, J., Hooper, G. J., Woodfield, T. B. F., & Groll, J. (2017) · Advanced Materials · doi:10.1002/adma.201703404 · Cited by 331
Lee, H., Han, W., Kim, H., Ha, D.-H., Jang, J., Kim, B. S., & Cho, D.-W. (2017) · Biomacromolecules · doi:10.1021/acs.biomac.6b01908 · Cited by 328
Bio-inspired detoxification using 3D-printed hydrogel nanocomposites
Gou, M., Qu, X., Zhu, W., Xiang, M., Yang, J., Zhang, K., Wei, Y., & Chen, S. (2014) · Nature Communications · doi:10.1038/ncomms4774 · Cited by 323
Self-citationMcMillin, D. W., Delmore, J., Weisberg, E., Negri, J. M., Geer, D. C., Klippel, S., Mitsiades, N., Schlossman, R. L., Munshi, N. C., Kung, A. L., et al. (2010) · Nature Medicine · doi:10.1038/nm.2112 · Cited by 315
Gao, L., Kupfer, M. E., Jung, J. P., Yang, L., Zhang, P., Da Sie, Y., Tran, Q., Ajeti, V., Freeman, B. T., Fast, V. G., et al. (2017) · Circulation Research · doi:10.1161/circresaha.116.310277 · Cited by 314
3D bioprinting for drug discovery and development in pharmaceutics
Peng, W., Datta, P., Ayan, B., Ozbolat, V., Sosnoski, D., & Ozbolat, I. T. (2017) · Acta Biomaterialia · doi:10.1016/j.actbio.2017.05.025 · Cited by 313
In situ handheld three‐dimensional bioprinting for cartilage regeneration
Di Bella, C., Duchi, S., O'Connell, C. D., Blanchard, R., Augustine, C., Yue, Z., Thompson, F., Richards, C., Beirne, S., Onofrillo, C., et al. (2018) · Journal of Tissue Engineering and Regenerative Medicine · doi:10.1002/term.2476 · Cited by 313
Chen, X., Aledia, A. S., Ghajar, C. M., Griffith, C. K., Putnam, A. J., Hughes, C. C. W., & George, S. C. (2009) · Tissue Engineering Part A · doi:10.1089/ten.tea.2008.0314 · Cited by 311
Sivaraman, A., Leach, J., Townsend, S., Iida, T., Hogan, B., Stolz, D., Fry, R., Samson, L., Tannenbaum, S., & Griffith, L. (2005) · Current Drug Metabolism · doi:10.2174/138920005774832632 · Cited by 310
Design and Printing Strategies in 3D Bioprinting of Cell‐Hydrogels: A Review
Lee, J. M., & Yeong, W. Y. (2016) · Advanced Healthcare Materials · doi:10.1002/adhm.201600435 · Cited by 310
Cell and tissue engineering for liver disease
Bhatia, S. N., Underhill, G. H., Zaret, K. S., & Fox, I. J. (2014) · Science Translational Medicine · doi:10.1126/scitranslmed.3005975 · Cited by 309
Hutson, C. B., Nichol, J. W., Aubin, H., Bae, H., Yamanlar, S., Al-Haque, S., Koshy, S. T., & Khademhosseini, A. (2011) · Tissue Engineering Part A · doi:10.1089/ten.tea.2010.0666 · Cited by 303
Kesti, M., Müller, M., Becher, J., Schnabelrauch, M., D’Este, M., Eglin, D., & Zenobi-Wong, M. (2015) · Acta Biomaterialia · doi:10.1016/j.actbio.2014.09.033 · Cited by 294
Almeida, C. R., Serra, T., Oliveira, M. I., Planell, J. A., Barbosa, M. A., & Navarro, M. (2014) · Acta Biomaterialia · doi:10.1016/j.actbio.2013.10.035 · Cited by 290
3D spheroid culture of hESC/hiPSC-derived hepatocyte-like cells for drug toxicity testing
Takayama, K., Kawabata, K., Nagamoto, Y., Kishimoto, K., Tashiro, K., Sakurai, F., Tachibana, M., Kanda, K., Hayakawa, T., Furue, M. K., et al. (2013) · Biomaterials · doi:10.1016/j.biomaterials.2012.11.029 · Cited by 289
3D‐Printed Artificial Microfish
Zhu, W., Li, J., Leong, Y. J., Rozen, I., Qu, X., Dong, R., Wu, Z., Gao, W., Chung, P. H., Wang, J., et al. (2015) · Advanced Materials · doi:10.1002/adma.201501372 · Cited by 288
Self-citationWang, L. L., Highley, C. B., Yeh, Y., Galarraga, J. H., Uman, S., & Burdick, J. A. (2018) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.36323 · Cited by 286
Tissue Engineering Approaches in the Design of Healthy and Pathological In Vitro Tissue Models
Caddeo, S., Boffito, M., & Sartori, S. (2017) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2017.00040 · Cited by 285
Direct 3D cell-printing of human skin with functional transwell system
Kim, B. S., Lee, J.-S., Gao, G., & Cho, D.-W. (2017) · Biofabrication · doi:10.1088/1758-5090/aa71c8 · Cited by 282
Liu, W., Zhong, Z., Hu, N., Zhou, Y., Maggio, L., Miri, A. K., Fragasso, A., Jin, X., Khademhosseini, A., & Zhang, Y. S. (2018) · Biofabrication · doi:10.1088/1758-5090/aa9d44 · Cited by 280
O’Connell, C. D., Di Bella, C., Thompson, F., Augustine, C., Beirne, S., Cornock, R., Richards, C. J., Chung, J., Gambhir, S., Yue, Z., et al. (2016) · Biofabrication · doi:10.1088/1758-5090/8/1/015019 · Cited by 274
Geometric control of vascular networks to enhance engineered tissue integration and function
Baranski, J. D., Chaturvedi, R. R., Stevens, K. R., Eyckmans, J., Carvalho, B., Solorzano, R. D., Yang, M. T., Miller, J. S., Bhatia, S. N., & Chen, C. S. (2013) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1217796110 · Cited by 267
Natural and genetically engineered proteins for tissue engineering
Gomes, S., Leonor, I. B., Mano, J. F., Reis, R. L., & Kaplan, D. L. (2012) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2011.07.003 · Cited by 261
Stanton, M. M., Samitier, J., & Sánchez, S. (2015) · Lab on a Chip · doi:10.1039/c5lc90069g · Cited by 252
Diamantides, N., Wang, L., Pruiksma, T., Siemiatkoski, J., Dugopolski, C., Shortkroff, S., Kennedy, S., & Bonassar, L. J. (2017) · Biofabrication · doi:10.1088/1758-5090/aa780f · Cited by 250
Nanoengineered Ionic–Covalent Entanglement (NICE) Bioinks for 3D Bioprinting
Chimene, D., Peak, C. W., Gentry, J. L., Carrow, J. K., Cross, L. M., Mondragon, E., Cardoso, G. B., Kaunas, R., & Gaharwar, A. K. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b19808 · Cited by 248
Jin, Y., Liu, C., Chai, W., Compaan, A., & Huang, Y. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b03613 · Cited by 238
3D printing of biomimetic microstructures for cancer cell migration
Huang, T. Q., Qu, X., Liu, J., & Chen, S. (2014) · Biomedical Microdevices · doi:10.1007/s10544-013-9812-6 · Cited by 237
Self-citationMicromolded gelatin hydrogels for extended culture of engineered cardiac tissues
McCain, M. L., Agarwal, A., Nesmith, H. W., Nesmith, A. P., & Parker, K. K. (2014) · Biomaterials · doi:10.1016/j.biomaterials.2014.03.052 · Cited by 237
Schütz, K., Placht, A.-M., Paul, B., Brüggemeier, S., Gelinsky, M., & Lode, A. (2017) · Journal of Tissue Engineering and Regenerative Medicine · doi:10.1002/term.2058 · Cited by 236
3D bioprinting of photocrosslinkable hydrogel constructs
Pereira, R. F., & Bártolo, P. J. (2015) · Journal of Applied Polymer Science · doi:10.1002/app.42458 · Cited by 232
Induced Pluripotent Stem Cells: Problems and Advantages when Applying them in Regenerative Medicine
Medvedev, S. P., Shevchenko, A. I., & Zakian, S. M. (2010) · Acta Naturae · doi:10.32607/20758251-2010-2-2-18-27 · Cited by 232
Light-assisted direct-write of 3D functional biomaterials
Hribar, K. C., Soman, P., Warner, J., Chung, P., & Chen, S. (2014) · Lab Chip · doi:10.1039/c3lc50634g · Cited by 231
Self-citationLiver-cell patterning lab chip: mimicking the morphology of liver lobule tissue
Ho, C.-T., Lin, R.-Z., Chen, R.-J., Chin, C.-K., Gong, S.-E., Chang, H.-Y., Peng, H.-L., Hsu, L., Yew, T.-R., Chang, S.-F., et al. (2013) · Lab on a Chip · doi:10.1039/c3lc50402f · Cited by 230
Gu, Q., Tomaskovic‐Crook, E., Wallace, G. G., & Crook, J. M. (2017) · Advanced Healthcare Materials · doi:10.1002/adhm.201700175 · Cited by 228
Handheld co-axial bioprinting: application to in situ surgical cartilage repair
Duchi, S., Onofrillo, C., O’Connell, C. D., Blanchard, R., Augustine, C., Quigley, A. F., Kapsa, R. M. I., Pivonka, P., Wallace, G., Di Bella, C., et al. (2017) · Scientific Reports · doi:10.1038/s41598-017-05699-x · Cited by 219
Biomaterials for tissue engineering applications
Keane, T. J., & Badylak, S. F. (2014) · Seminars in Pediatric Surgery · doi:10.1053/j.sempedsurg.2014.06.010 · Cited by 207
Morris, V. B., Nimbalkar, S., Younesi, M., McClellan, P., & Akkus, O. (2017) · Annals of Biomedical Engineering · doi:10.1007/s10439-016-1643-1 · Cited by 207
Piezoelectric inkjet printing of polymers: Stem cell patterning on polymer substrates
Kim, J. D., Choi, J. S., Kim, B. S., Chan Choi, Y., & Cho, Y. W. (2010) · Polymer · doi:10.1016/j.polymer.2010.03.038 · Cited by 206
Yoon No, D., Lee, K.-H., Lee, J., & Lee, S.-H. (2015) · Lab on a Chip · doi:10.1039/c5lc00611b · Cited by 205
Biomaterials and cells for cardiac tissue engineering: Current choices
Chaudhuri, R., Ramachandran, M., Moharil, P., Harumalani, M., & Jaiswal, A. K. (2017) · Materials Science and Engineering: C · doi:10.1016/j.msec.2017.05.121 · Cited by 202
High-Resolution Patterned Cellular Constructs by Droplet-Based 3D Printing
Graham, A. D., Olof, S. N., Burke, M. J., Armstrong, J. P. K., Mikhailova, E. A., Nicholson, J. G., Box, S. J., Szele, F. G., Perriman, A. W., & Bayley, H. (2017) · Scientific Reports · doi:10.1038/s41598-017-06358-x · Cited by 201
Drug and cell delivery for cardiac regeneration
Hastings, C. L., Roche, E. T., Ruiz-Hernandez, E., Schenke-Layland, K., Walsh, C. J., & Duffy, G. P. (2015) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2014.08.006 · Cited by 200
Berger, D. R., Ware, B. R., Davidson, M. D., Allsup, S. R., & Khetani, S. R. (2015) · Hepatology · doi:10.1002/hep.27621 · Cited by 195
Application of Extrusion-Based Hydrogel Bioprinting for Cartilage Tissue Engineering
You, F., Eames, B. F., & Chen, X. (2017) · International Journal of Molecular Sciences · doi:10.3390/ijms18071597 · Cited by 178
Rao, C., Prodromakis, T., Kolker, L., Chaudhry, U. A. R., Trantidou, T., Sridhar, A., Weekes, C., Camelliti, P., Harding, S. E., Darzi, A., et al. (2013) · Biomaterials · doi:10.1016/j.biomaterials.2012.11.055 · Cited by 176
Concise Review: Bioprinting of Stem Cells for Transplantable Tissue Fabrication
Leberfinger, A. N., Ravnic, D. J., Dhawan, A., & Ozbolat, I. T. (2017) · Stem Cells Translational Medicine · doi:10.1002/sctm.17-0148 · Cited by 175
Coaxial 3D bioprinting of self-assembled multicellular heterogeneous tumor fibers
Dai, X., Liu, L., Ouyang, J., Li, X., Zhang, X., Lan, Q., & Xu, T. (2017) · Scientific Reports · doi:10.1038/s41598-017-01581-y · Cited by 173
A novel bioprinting method and system for forming hybrid tissue engineering constructs
Shanjani, Y., Pan, C. C., Elomaa, L., & Yang, Y. (2015) · Biofabrication · doi:10.1088/1758-5090/7/4/045008 · Cited by 169
Bioprinting and Differentiation of Stem Cells
Irvine, S. A., & Venkatraman, S. S. (2016) · Molecules · doi:10.3390/molecules21091188 · Cited by 167
Three-Dimensional Printing of Bone Extracellular Matrix for Craniofacial Regeneration
Hung, B. P., Naved, B. A., Nyberg, E. L., Dias, M., Holmes, C. A., Elisseeff, J. H., Dorafshar, A. H., & Grayson, W. L. (2016) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.6b00101 · Cited by 165
Tissue matrix arrays for high-throughput screening and systems analysis of cell function
Beachley, V. Z., Wolf, M. T., Sadtler, K., Manda, S. S., Jacobs, H., Blatchley, M. R., Bader, J. S., Pandey, A., Pardoll, D., & Elisseeff, J. H. (2015) · Nature Methods · doi:10.1038/nmeth.3619 · Cited by 164
How Drugs are Developed and Approved by the FDA: Current Process and Future Directions
Ciociola, A. A., Cohen, L. B., Kulkarni, P., Kefalas, C., Buchman, A., Burke, C., Cain, T., Connor, J., Ehrenpreis, E. D., Fang, J., et al. (2014) · American Journal of Gastroenterology · doi:10.1038/ajg.2013.407 · Cited by 162
Digital micromirror device projection printing system for meniscus tissue engineering
Grogan, S. P., Chung, P. H., Soman, P., Chen, P., Lotz, M. K., Chen, S., & D’Lima, D. D. (2013) · Acta Biomaterialia · doi:10.1016/j.actbio.2013.03.020 · Cited by 162
Self-citationCardiovascular organ-on-a-chip platforms for drug discovery and development
Ribas, J., Sadeghi, H., Manbachi, A., Leijten, J., Brinegar, K., Zhang, Y. S., Ferreira, L., & Khademhosseini, A. (2016) · Applied In Vitro Toxicology · doi:10.1089/aivt.2016.0002 · Cited by 161
Three-dimensional bioprinting of embryonic stem cells directs highly uniform embryoid body formation
Ouyang, L., Yao, R., Mao, S., Chen, X., Na, J., & Sun, W. (2015) · Biofabrication · doi:10.1088/1758-5090/7/4/044101 · Cited by 161
Granular gel support-enabled extrusion of three-dimensional alginate and cellular structures
Jin, Y., Compaan, A., Bhattacharjee, T., & Huang, Y. (2016) · Biofabrication · doi:10.1088/1758-5090/8/2/025016 · Cited by 161
3D-engineering of Cellularized Conduits for Peripheral Nerve Regeneration
Hu, Y. X., Wu, Y., Gou, Z., Tao, J., Zhang, J., Liu, Q., Kang, T., Jiang, S., Huang, S., He, J., et al. (2016) · Scientific Reports · doi:10.1038/srep32184 · Cited by 161
Self-citationMicropattern width dependent sarcomere development in human ESC-derived cardiomyocytes
Salick, M. R., Napiwocki, B. N., Sha, J., Knight, G. T., Chindhy, S. A., Kamp, T. J., Ashton, R. S., & Crone, W. C. (2014) · Biomaterials · doi:10.1016/j.biomaterials.2014.02.001 · Cited by 159
Unger, C., Kramer, N., Walzl, A., Scherzer, M., Hengstschläger, M., & Dolznig, H. (2014) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2014.10.015 · Cited by 158
Freeform drop-on-demand laser printing of 3D alginate and cellular constructs
Xiong, R., Zhang, Z., Chai, W., Huang, Y., & Chrisey, D. B. (2015) · Biofabrication · doi:10.1088/1758-5090/7/4/045011 · Cited by 158
Cui, H., Zhu, W., Holmes, B. B., & Zhang, L. G. (2016) · Advanced Science · doi:10.1002/advs.201600058 · Cited by 155
Self-citationStichler, S., Bock, T. A., Paxton, N. C., Bertlein, S., Levato, R., Schill, V., Smolan, W., Malda, J., Teßmar, J., Blunk, T., et al. (2017) · Biofabrication · doi:10.1088/1758-5090/aa8cb7 · Cited by 155
3D bioprinting: improving in vitro models of metastasis with heterogeneous tumor microenvironments
Albritton, J. L., & Miller, J. S. (2017) · Disease Models & Mechanisms · doi:10.1242/dmm.025049 · Cited by 154
Preserved liver-specific functions of hepatocytes in 3D co-culture with endothelial cell sheets
Kim, K.-S., Ohashi, K., Utoh, R., Kano, K., & Okano, T. (2011) · Biomaterials · doi:10.1016/j.biomaterials.2011.10.084 · Cited by 149
Standardized 3D Bioprinting of Soft Tissue Models with Human Primary Cells
Rimann, M., Bono, E., Annaheim, H., Bleisch, M., & Graf‐Hausner, U. (2015) · SLAS TECHNOLOGY · doi:10.1177/2211068214567146 · Cited by 147
Kizawa, H., Nagao, E., Shimamura, M., Zhang, G., & Torii, H. (2017) · Biochemistry and Biophysics Reports · doi:10.1016/j.bbrep.2017.04.004 · Cited by 147
Tuning the Poisson's Ratio of Biomaterials for Investigating Cellular Response
Zhang, W., Soman, P., Meggs, K., Qu, X., & Chen, S. (2013) · Advanced Functional Materials · doi:10.1002/adfm.201202666 · Cited by 145
Self-citationPatterned prevascularised tissue constructs by assembly of polyelectrolyte hydrogel fibres
Leong, M. F., Toh, J. K. C., Du, C., Narayanan, K., Lu, H., Lim, T. C., Wan, A. C. A., & Ying, J. Y. (2013) · Nature Communications · doi:10.1038/ncomms3353 · Cited by 143
Engelhardt, S., Hoch, E., Borchers, K., Meyer, W., Krüger, H., Tovar, G. E. M., & Gillner, A. (2011) · Biofabrication · doi:10.1088/1758-5082/3/2/025003 · Cited by 141
Koch, L., Deiwick, A., Franke, A., Schwanke, K., Haverich, A., Zweigerdt, R., & Chichkov, B. N. (2018) · Biofabrication · doi:10.1088/1758-5090/aab981 · Cited by 139
Characterization of a functional C3A liver spheroid model
Gaskell, H., Sharma, P., Colley, H. E., Murdoch, C., Williams, D. P., & Webb, S. D. (2016) · Toxicology Research · doi:10.1039/c6tx00101g · Cited by 137
Tan, Y. J., Tan, X., Yeong, W. Y., & Tor, S. B. (2016) · Scientific Reports · doi:10.1038/srep39140 · Cited by 137
Reid, J. A., Mollica, P. A., Johnson, G. D., Ogle, R. C., Bruno, R. D., & Sachs, P. C. (2016) · Biofabrication · doi:10.1088/1758-5090/8/2/025017 · Cited by 134
Russo, V., Yu, C., Belliveau, P., Hamilton, A., & Flynn, L. E. (2013) · Stem Cells Translational Medicine · doi:10.5966/sctm.2013-0125 · Cited by 132
Self-citationEmbedded Multimaterial Extrusion Bioprinting
Rocca, M., Fragasso, A., Liu, W. H., Heinrich, M. A., & Zhang, Y. S. (2017) · SLAS TECHNOLOGY · doi:10.1177/2472630317742071 · Cited by 131
Chondrocytes and stem cells in 3D-bioprinted structures create human cartilage in vivo
Apelgren, P., Amoroso, M., Lindahl, A. H., Brantsing, C., Rotter, N., Gatenholm, P., & Kölby, L. (2017) · PLoS ONE · doi:10.1371/journal.pone.0189428 · Cited by 131
Optimizing cell viability in droplet-based cell deposition
Hendriks, J., Visser, C. W., Henke, S., Leijten, J., Saris, D. B. F., Sun, C., Lohse, D., & Karperien, M. (2015) · Scientific Reports · doi:10.1038/srep11304 · Cited by 123
Highly Elastic Biodegradable Single-Network Hydrogel for Cell Printing
Xu, C., Lee, W., Dai, G., & Hong, Y. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b01294 · Cited by 121
Cui, X., Breitenkamp, K., Lotz, M., & DʼLima, D. D. (2012) · Biotechnology and Bioengineering · doi:10.1002/bit.24488 · Cited by 120
3D Printing of Biocompatible Supramolecular Polymers and their Composites
Hart, L. R., Li, S., Sturgess, C., et al. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b10471 · Cited by 120
Quantitative criteria to benchmark new and existing bio-inks for cell compatibility
Dubbin, K., Tabet, A., & Heilshorn, S. C. (2017) · Biofabrication · doi:10.1088/1758-5090/aa869f · Cited by 119
Smith, C. M., Christian, J. J., Warren, W. L., & Williams, S. K. (2007) · Tissue Engineering · doi:10.1089/ten.2006.0101 · Cited by 116
3D bioprinting of GelMA scaffolds triggers mineral deposition by primary human osteoblasts
McBeth, C., Lauer, J. C., Ottersbach, M., Campbell, J., Sharon, A., & Sauer-Budge, A. F. (2016) · Biofabrication · doi:10.1088/1758-5090/aa53bd · Cited by 115
Three-dimensional filamentous human diseased cardiac tissue model
Ma, Z., Koo, S.-M., Finnegan, M. A., Loskill, P., Huebsch, N., Marks, N. C., Conklin, B. R., Grigoropoulos, C. P., & Healy, K. E. (2013) · Biomaterials · doi:10.1016/j.biomaterials.2013.10.052 · Cited by 114
Akkineni, A. R., Ahlfeld, T., Lode, A., & Gelinsky, M. (2016) · Biofabrication · doi:10.1088/1758-5090/8/4/045001 · Cited by 112
Structural reinforcement of cell-laden hydrogels with microfabricated three dimensional scaffolds
Cha, C., Soman, P., Zhu, W. Z., Nikkhah, M., Camci‐Unal, G., Chen, S., & Khademhosseini, A. (2013) · Biomaterials Science · doi:10.1039/c3bm60210a · Cited by 111
Self-citation3D freeform printing of silk fibroin
Rodríguez, M. J., Dixon, T. A., Cohen, E., Huang, W., Omenetto, F. G., & Kaplan, D. L. (2018) · Acta Biomaterialia · doi:10.1016/j.actbio.2018.02.035 · Cited by 110
Design and 3D Printing of Hydrogel Scaffolds with Fractal Geometries
Warner, J., Soman, P., Zhu, W. Z., Tom, M., & Chen, S. (2016) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.6b00140 · Cited by 109
Self-citationThiol-ene Clickable Poly(glycidol) Hydrogels for Biofabrication
Stichler, S., Jüngst, T., Schamel, M., Zilkowski, I., Kuhlmann, M., Bock, T. A., Blunk, T., Teßmar, J., & Gröll, J. (2016) · Annals of Biomedical Engineering · doi:10.1007/s10439-016-1633-3 · Cited by 108
Stem cell-derived hepatocytes and their use in toxicology
Guguen‐Guillouzo, C., Corlu, A., & Guillouzo, A. (2009) · Toxicology · doi:10.1016/j.tox.2009.09.019 · Cited by 107
Cheng, T. S., Loy, S. L., Cheung, Y. B., Chan, J. K. Y., Tint, M. T., Godfrey, K. M., Gluckman, P. D., Kwek, K. Y. C., Saw, S., Chong, Y. S., et al. (2016) · PLoS ONE · doi:10.1371/journal.pone.0147563 · Cited by 105
Carmen, J., Burger, S. R., McCaman, M. T., & Rowley, J. A. (2011) · Regenerative Medicine · doi:10.2217/rme.11.105 · Cited by 102
Polymers for pro- and anti-angiogenic therapy
Fischbach, C., & Mooney, D. J. (2007) · Biomaterials · doi:10.1016/j.biomaterials.2006.12.029 · Cited by 98
Zhang, Z., Xiong, R., Mei, R., Huang, Y. H., & Chrisey, D. B. (2015) · Langmuir · doi:10.1021/acs.langmuir.5b00919 · Cited by 96
Hribar, K. C., Finlay, D., Ma, X., Qu, X., Ondeck, M. G., Chung, P. H., Zanella, F., Engler, A. J., Sheikh, F., Vuori, K., et al. (2015) · Lab on a Chip · doi:10.1039/c5lc00159e · Cited by 96
Self-citationSakai, S., Ohi, H., Hotta, T., Kamei, H., & Taya, M. (2017) · Biopolymers · doi:10.1002/bip.23080 · Cited by 92
3D In Vitro Model for Breast Cancer Research Using Magnetic Levitation and Bioprinting Method
Leonard, F., & Godin, B. (2016) · Methods in molecular biology · doi:10.1007/978-1-4939-3444-7_21 · Cited by 89
Kang, L. H., Armstrong, P. A., Lee, L. J., Duan, B., Kang, K. H., & Butcher, J. T. (2016) · Annals of Biomedical Engineering · doi:10.1007/s10439-016-1619-1 · Cited by 87
Assessment of hydrogels for bioprinting of endothelial cells
Benning, L., Gutzweiler, L., Tröndle, K., Riba, J., Zengerle, R., Koltay, P., Zimmermann, S., Stark, G. B., & Finkenzeller, G. (2017) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.36291 · Cited by 87
Kim, B. S., Jang, J., Chae, S., Gao, G., Kong, J., Ahn, M., & Cho, D. (2016) · Biofabrication · doi:10.1088/1758-5090/8/3/035013 · Cited by 84
Sakai, S., Kamei, H., Mori, T., Hotta, T., Ohi, H., Nakahata, M., & Taya, M. (2018) · Biomacromolecules · doi:10.1021/acs.biomac.7b01827 · Cited by 84
Yoon, H. Y., Lee, J., Yim, H., Kim, G., & Chun, W. (2016) · RSC Advances · doi:10.1039/c5ra19532b · Cited by 83
Encapsulation of Cardiomyocytes in a Fibrin Hydrogel for Cardiac Tissue Engineering
Ye, K. Y., Sullivan, K. E., & Black, L. D. (2011) · Journal of Visualized Experiments · doi:10.3791/3251 · Cited by 82
3D Printing of Thermo-Responsive Methylcellulose Hydrogels for Cell-Sheet Engineering
Cochis, A., Bonetti, L., Sorrentino, R., Negrini, N. C., Grassi, F. A., Leigheb, M., Rimondini, L., & Farè, S. (2018) · Materials · doi:10.3390/ma11040579 · Cited by 82
Synthetic sandwich culture of 3D hepatocyte monolayer
Du, Y., Han, R., Wen, F., San, S. N. S., Xia, L., Wohland, T., Leo, H. L., & Yu, H. (2007) · Biomaterials · doi:10.1016/j.biomaterials.2007.09.016 · Cited by 80
A 3D-engineered porous conduit for peripheral nerve repair
Tao, J., Hu, Y., Wang, S., Zhang, J., Liu, X., Gou, Z., Cheng, H., Liu, Q., Zhang, Q., You, S., et al. (2017) · Scientific Reports · doi:10.1038/srep46038 · Cited by 80
Self-citationHo, L., & Hsu, S. (2018) · Acta Biomaterialia · doi:10.1016/j.actbio.2018.01.044 · Cited by 80
Study of gelatin as an effective energy absorbing layer for laser bioprinting
Xiong, R., Zhang, Z., Chai, W., Chrisey, D. B., & Huang, Y. H. (2017) · Biofabrication · doi:10.1088/1758-5090/aa74f2 · Cited by 77
Kawecki, F., Clafshenkel, W. P., Auger, F. A., Bourget, J.-M., Fradette, J., & Devillard, R. (2018) · Biofabrication · doi:10.1088/1758-5090/aabd5b · Cited by 75
A Tubular Biomaterial Construct Exhibiting a Negative Poisson’s Ratio
Lee, J. W., Soman, P., Park, J., Chen, S., & Cho, D. (2016) · PLoS ONE · doi:10.1371/journal.pone.0155681 · Cited by 73
Self-citation
Research works printed but not linked: 10
- Shafiee, 2015, Post-deposition bioink self-assembly: a quantitative study, Biofabrication, 7, 10.1088/1758-5090/7/4/045005 · doi:10.1088/1758-5090/7/4/045005
- Gettler, 2017, Formation of adipose stromal vascular fraction cell-laden spheroids using a three-dimensional bioprinter and superhydrophobic surfaces, Tissue Eng. C Methods, 23, 516, 10.1089/ten.tec.2017.0056 · doi:10.1089/ten.tec.2017.0056
- McElheny, 2017, Design and fabrication of a low-cost three-dimensional bioprinter, J. Med. Device., 11, 10.1115/1.4037259 · doi:10.1115/1.4037259
- Shao, 2015, Bioactive glass-reinforced bioceramic ink writing scaffolds: sintering, microstructure and mechanical behavior, Biofabrication, 7, 10.1088/1758-5090/7/3/035010 · doi:10.1088/1758-5090/7/3/035010
- Dinh, 2017, Effective light directed assembly of building blocks with microscale control, Small, 13
- Yang, 2015, Selective pattern of cancer cell accumulation and growth using UV modulating printing of hydrogels, Biomed. Microdevices, 17, 10.1007/s10544-015-0013-3 · doi:10.1007/s10544-015-0013-3
- Andò, 2016, An all-inkjet printed bending actuator with embedded sensing feature and an electromagnetic driving mechanism, Actuators, 5, 21, 10.3390/act5030021 · doi:10.3390/act5030021
- Soman, 2012, A three-dimensional polymer scaffolding material exhibiting a zero Poisson's ratio, Soft Matter, 8, 4946, 10.1039/c2sm07354d · doi:10.1039/c2sm07354d
- Steele, 2017, Stem cell therapy: healing or hype? Why stem cell delivery doesn't work, Circ. Res., 120, 1868, 10.1161/CIRCRESAHA.117.310584 · doi:10.1161/circresaha.117.310584
- Berger, 2014, Enhancing the functional maturity of iPSC-derived human hepatocytes via controlled presentation of cell-cell interactions in vitro, Hepatology, 1
Cited by
3D printing of hydrogels: Rational design strategies and emerging biomedical applications
Li, J., Wu, C., Chu, P. K., & Gelinsky, M. (2020) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2020.100543 · Cited by 862
Photopolymerizable Biomaterials and Light-Based 3D Printing Strategies for Biomedical Applications
Yu, C., Schimelman, J., Wang, P., Miller, K. L., Ma, X., You, S., Guan, J., Sun, B., Zhu, W., & Chen, S. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00810 · Cited by 579
Self-citationUse of Zebrafish in Drug Discovery Toxicology
Cassar, S., Adatto, I., Freeman, J. L., Gamse, J. T., Iturria, I., Lawrence, C., Muriana, A., Peterson, R. T., Van Cruchten, S., & Zon, L. I. (2020) · Chemical Research in Toxicology · doi:10.1021/acs.chemrestox.9b00335 · Cited by 561
Bioinks and bioprinting technologies to make heterogeneous and biomimetic tissue constructs
Ashammakhi, N., Ahadian, S., Xu, C., Montazerian, H., Ko, H., Nasiri, R., Barros, N., & Khademhosseini, A. (2019) · Materials Today Bio · doi:10.1016/j.mtbio.2019.100008 · Cited by 549
Sun, W., Starly, B., Daly, A. C., Burdick, J. A., Groll, J., Skeldon, G., Shu, W., Sakai, Y., Shinohara, M., Nishikawa, M., et al. (2020) · Biofabrication · doi:10.1088/1758-5090/ab5158 · Cited by 426
Metadata
- Authors
- Ma, X., Liu, J., Zhu, W., Tang, M., Lawrence, N., Yu, C., Gou, M., & Chen, S.
- Venue
- Advanced Drug Delivery Reviews
- Publisher
- Elsevier BV
- Published
- 2018-07
- Volume
- 132
- Pages
- 235-251
- ISSN
- 0169-409X (ISSN-L)
- OpenAlex
- W2809205410
- Cited by
- 401
- References
- 239
- FWCI
- 3.65
- Type
- journal article
- Language
- en
- Open access
- bronze
- Licence
- www.elsevier.com/tdm/userlicense/1.0/ (tdm)
- www.elsevier.com/legal/tdmrep-license (tdm)
- www.elsevier.com/open-access/userlicense/1.0/ (am, 492 d)
- doi.org/10.15223/policy-017 (stm-asf)
- doi.org/10.15223/policy-037 (stm-asf)
- doi.org/10.15223/policy-012 (stm-asf)
- doi.org/10.15223/policy-029 (stm-asf)
- doi.org/10.15223/policy-004 (stm-asf)
- Funders
- California Institute for Regenerative Medicine (RT3-07899)
- National Institutes of Health (R01EB021857, R21HD090662)
- National Science Foundation (CMMI-1547005, CMMI-1644967)
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.