The DOI matches its Crossref record; 243 of the 243 references it cites were found in a registry or an index.
Advances in Extrusion 3D Bioprinting: A Focus on Multicomponent Hydrogel‐Based Bioinks
Abstract
3D bioprinting involves the combination of 3D printing technologies with cells, growth factors and biomaterials, and has been considered as one of the most advanced tools for tissue engineering and regenerative medicine (TERM). However, despite multiple breakthroughs, it is evident that numerous challenges need to be overcome before 3D bioprinting will eventually become a clinical solution for a variety of TERM applications. To produce a 3D structure that is biologically functional, cell‐laden bioinks must be optimized to meet certain key characteristics including rheological properties, physico‐mechanical properties, and biofunctionality; a difficult task for a single component bioink especially for extrusion based bioprinting. As such, more recent research has been centred on multicomponent bioinks consisting of a combination of two or more biomaterials to improve printability, shape fidelity and biofunctionality. In this article, multicomponent hydrogel‐based bioink systems are systemically reviewed based on the inherent nature of the bioink (natural or synthetic hydrogels), including the most current examples demonstrating properties and advances in application of multicomponent bioinks, specifically for extrusion based 3D bioprinting. This review article will assist researchers in the field in identifying the most suitable bioink based on their requirements, as well as pinpointing current unmet challenges in the field.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
1 retracted
Bolli, R., Chugh, A. R., D'Amario, D., Loughran, J. H., Stoddard, M. F., Ikram, S., Beache, G. M., Wagner, S. G., Leri, A., Hosoda, T., et al. (2011) · The Lancet · doi:10.1016/s0140-6736(11)61590-0 · Cited by 1,288
RetractedMatrix elasticity directs stem cell lineage specification
Engler, A. J., Sen, S., Sweeney, H. L., & Discher, D. E. (2006) · Cell · doi:10.1016/j.cell.2006.06.044 · Cited by 13,915
Langer, R., & Vacanti, J. P. (1993) · Science · doi:10.1126/science.8493529 · Cited by 9,893
Alginate: Properties and biomedical applications
Lee, K. Y., & Mooney, D. J. (2012) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2011.06.003 · Cited by 8,095
3D bioprinting of tissues and organs
Murphy, S. V., & Atala, A. (2014) · Nature Biotechnology · doi:10.1038/nbt.2958 · Cited by 7,034
Porosity of 3D biomaterial scaffolds and osteogenesis
Karageorgiou, V., & Kaplan, D. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2005.02.002 · Cited by 6,622
Hydrogels for biomedical applications
Hoffman, A. S. (2002) · Advanced Drug Delivery Reviews · doi:10.1016/s0169-409x(01)00239-3 · Cited by 4,864
Hydrogels in drug delivery: Progress and challenges
Hoare, T. R., & Kohane, D. S. (2008) · Polymer · doi:10.1016/j.polymer.2008.01.027 · Cited by 3,776
Microencapsulated Islets as Bioartificial Endocrine Pancreas
Lim, F., & Sun, A. M. (1980) · Science · doi:10.1126/science.6776628 · Cited by 2,377
Hyaluronic Acid Hydrogels for Biomedical Applications
Burdick, J. A., & Prestwich, G. D. (2011) · Advanced Materials · doi:10.1002/adma.201003963 · Cited by 2,139
3D bioprinting of vascularized, heterogeneous cell-laden tissue constructs
Kolesky, D. B., Truby, R. L., Gladman, A. S., Busbee, T. A., Homan, K. A., & Lewis, J. A. (2014) · Advanced Materials · doi:10.1002/adma.201305506 · Cited by 2,102
Printing three-dimensional tissue analogues with decellularized extracellular matrix bioink
Pati, F., Jang, J., Ha, D.-H., Won Kim, S., Rhie, J.-W., Shim, J.-H., Kim, D.-H., & Cho, D.-W. (2014) · Nature Communications · doi:10.1038/ncomms4935 · Cited by 1,904
25th Anniversary Article: Engineering Hydrogels for Biofabrication
Malda, J., Visser, J., Melchels, F. P., Jüngst, T., Hennink, W. E., Dhert, W. J. A., Groll, J., & Hutmacher, D. W. (2013) · Advanced Materials · doi:10.1002/adma.201302042 · Cited by 1,901
Control of Stem Cell Fate by Physical Interactions with the Extracellular Matrix
Guilak, F., Cohen, D. M., Estes, B. T., Gimble, J. M., Liedtke, W., & Chen, C. S. (2009) · Cell Stem Cell · doi:10.1016/j.stem.2009.06.016 · Cited by 1,850
Hinton, T. J., Jallerat, Q., Palchesko, R. N., Park, J. H., Grodzicki, M. S., Shue, H.-J., Ramadan, M. H., Hudson, A. R., & Feinberg, A. W. (2015) · Science Advances · doi:10.1126/sciadv.1500758 · Cited by 1,805
3D bioprinting for engineering complex tissues
Mandrycky, C., Wang, Z., Kim, K., & Kim, D.-H. (2016) · Biotechnology Advances · doi:10.1016/j.biotechadv.2015.12.011 · Cited by 1,754
Current advances and future perspectives in extrusion-based bioprinting
Ozbolat, I. T., & Hospodiuk, M. (2016) · Biomaterials · doi:10.1016/j.biomaterials.2015.10.076 · Cited by 1,572
Classification, processing and application of hydrogels: A review
Ullah, F., Othman, M. B. H., Javed, F., Ahmad, Z., & Akil, H. M. (2015) · Materials Science and Engineering: C · doi:10.1016/j.msec.2015.07.053 · Cited by 1,555
Markstedt, K., Mantas, A., Tournier, I., Martínez Ávila, H., Hägg, D., & Gatenholm, P. (2015) · Biomacromolecules · doi:10.1021/acs.biomac.5b00188 · Cited by 1,528
Bioactive modification of poly (ethylene glycol) hydrogels for tissue engineering
Zhu, J. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.02.044 · Cited by 1,457
Bioinks for 3D bioprinting: an overview
Gungor-Ozkerim, P. S., Inci, I., Zhang, Y. S., Khademhosseini, A., & Dokmeci, M. R. (2018) · Biomaterials Science · doi:10.1039/c7bm00765e · Cited by 1,428
Hutmacher, D. W., Schantz, T., Zein, I., Ng, K. W., Teoh, S. H., & Tan, K. C. (2001) · Journal of Biomedical Materials Research · doi:10.1002/1097-4636(200105)55:2<203::aid-jbm1007>3.0.co;2-7 · Cited by 1,409
Poly(lactide) Stereocomplexes: Formation, Structure, Properties, Degradation, and Applications
Tsuji, H. (2005) · Macromolecular Bioscience · doi:10.1002/mabi.200500062 · Cited by 1,366
Alginate-Based Biomaterials for Regenerative Medicine Applications
Sun, J., & Tan, H. (2013) · Materials · doi:10.3390/ma6041285 · Cited by 1,361
Nanostructured functional materials prepared by atom transfer radical polymerization
Matyjaszewski, K., & Tsarevsky, N. V. (2009) · Nature Chemistry · doi:10.1038/nchem.257 · Cited by 1,258
Cell Encapsulation in Biodegradable Hydrogels for Tissue Engineering Applications
Nicodemus, G. D., & Bryant, S. J. (2008) · Tissue Engineering Part B: Reviews · doi:10.1089/ten.teb.2007.0332 · Cited by 1,239
Organ printing: Tissue spheroids as building blocks
Mironov, V., Visconti, R. P., Kasyanov, V., Forgacs, G., Drake, C. J., & Markwald, R. R. (2009) · Biomaterials · doi:10.1016/j.biomaterials.2008.12.084 · Cited by 1,238
Supramolecular polymeric hydrogels
Appel, E. A., del Barrio, J., Loh, X. J., & Scherman, O. A. (2012) · Chemical Society Reviews · doi:10.1039/c2cs35264h · Cited by 1,159
Bioink properties before, during and after 3D bioprinting
Hölzl, K., Lin, S., Tytgat, L., Van Vlierberghe, S., Gu, L., & Ovsianikov, A. (2016) · Biofabrication · doi:10.1088/1758-5090/8/3/032002 · Cited by 1,070
Ouyang, L., Yao, R., Zhao, Y., & Sun, W. (2016) · Biofabrication · doi:10.1088/1758-5090/8/3/035020 · Cited by 1,045
Direct 3D Printing of Shear‐Thinning Hydrogels into Self‐Healing Hydrogels
Highley, C. B., Rodell, C. B., & Burdick, J. A. (2015) · Advanced Materials · doi:10.1002/adma.201501234 · Cited by 1,043
Voxelated soft matter via multimaterial multinozzle 3D printing
Skylar-Scott, M. A., Mueller, J., Visser, C. W., & Lewis, J. A. (2019) · Nature · doi:10.1038/s41586-019-1736-8 · Cited by 1,024
Poly(lactide) Stereocomplexes: Formation, Structure, Properties, Degradation, and Applications
Tsuji, H. (2007) · Macromolecular Bioscience · doi:10.1002/mabi.200700275 · Cited by 1,021
3D Bioprinting of heterogeneous aortic valve conduits with alginate/gelatin hydrogels
Duan, B., Hockaday, L. A., Kang, K. H., & Butcher, J. T. (2013) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.34420 · Cited by 1,002
Regenerative medicine: Current therapies and future directions
Mao, A. S., & Mooney, D. J. (2015) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1508520112 · Cited by 941
The chemistry and engineering of polymeric hydrogel adhesives for wound closure: a tutorial
Ghobril, C., & Grinstaff, M. W. (2015) · Chemical Society Reviews · doi:10.1039/c4cs00332b · Cited by 923
Direct 3D bioprinting of perfusable vascular constructs using a blend bioink
Jia, W., Gungor-Ozkerim, P. S., Zhang, Y. S., Yue, K., Zhu, K., Liu, W., Pi, Q., Byambaa, B., Dokmeci, M. R., Shin, S. R., et al. (2016) · Biomaterials · doi:10.1016/j.biomaterials.2016.07.038 · Cited by 922
3D Printing of Highly Stretchable and Tough Hydrogels into Complex, Cellularized Structures
Hong, S., Sycks, D., Chan, H. F., Lin, S., Lopez, G. P., Guilak, F., Leong, K. W., & Zhao, X. (2015) · Advanced Materials · doi:10.1002/adma.201501099 · Cited by 873
Microfluidic Bioprinting of Heterogeneous 3D Tissue Constructs Using Low‐Viscosity Bioink
Colosi, C., Shin, S. R., Manoharan, V., Massa, S., Costantini, M., Barbetta, A., Dokmeci, M. R., Dentini, M., & Khademhosseini, A. (2016) · Advanced Materials · doi:10.1002/adma.201503310 · Cited by 863
Recent trends in bioinks for 3D printing
Gopinathan, J., & Noh, I. (2018) · Biomaterials Research · doi:10.1186/s40824-018-0122-1 · Cited by 846
Bryant, S. J., & Anseth, K. S. (2002) · Journal of Biomedical Materials Research · doi:10.1002/jbm.1217 · Cited by 845
3D printing of functional biomaterials for tissue engineering
Zhu, W., Ma, X., Gou, M., Mei, D., Zhang, K., & Chen, S. (2016) · Current Opinion in Biotechnology · doi:10.1016/j.copbio.2016.03.014 · Cited by 822
A definition of bioinks and their distinction from biomaterial inks
Groll, J., Burdick, J. A., Cho, D.-W., Derby, B., Gelinsky, M., Heilshorn, S. C., Jüngst, T., Malda, J., Mironov, V. A., Nakayama, K., et al. (2018) · Biofabrication · doi:10.1088/1758-5090/aaec52 · Cited by 797
Self-citationAdult mesenchymal stem cells and cell-based tissue engineering.
Tuan, R. S., Boland, G. M., & Tuli, R. (2003) · Arthritis Research · doi:10.1186/ar614 · Cited by 796
Click hydrogels, microgels and nanogels: Emerging platforms for drug delivery and tissue engineering
Jiang, Y., Chen, J., Deng, C., Suuronen, E. J., & Zhong, Z. (2014) · Biomaterials · doi:10.1016/j.biomaterials.2014.03.001 · Cited by 762
Biofabrication: reappraising the definition of an evolving field
Groll, J., Boland, T., Blunk, T., Burdick, J. A., Cho, D.-W., Dalton, P. D., Derby, B., Forgacs, G., Li, Q., Mironov, V. A., et al. (2016) · Biofabrication · doi:10.1088/1758-5090/8/1/013001 · Cited by 731
Self-citationSelf‐Healing Supramolecular Gels Formed by Crown Ether Based Host–Guest Interactions
Zhang, M., Xu, D., Yan, X., Chen, J., Dong, S., Zheng, B., & Huang, F. (2012) · Angewandte Chemie International Edition · doi:10.1002/anie.201203063 · Cited by 728
4D Bioprinting for Biomedical Applications
Gao, B., Yang, Q., Zhao, X., Jin, G., Ma, Y., & Xu, F. (2016) · Trends in Biotechnology · doi:10.1016/j.tibtech.2016.03.004 · Cited by 711
Vegas, A. J., Veiseh, O., Gürtler, M., Millman, J. R., Pagliuca, F. W., Bader, A. R., Doloff, J. C., Li, J., Chen, M., Olejnik, K., et al. (2016) · Nature Medicine · doi:10.1038/nm.4030 · Cited by 710
Self-citationHockaday, L. A., Kang, K. H., Colangelo, N. W., Cheung, P. Y. C., Duan, B., Malone, E., Wu, J., Girardi, L. N., Bonassar, L. J., Lipson, H., et al. (2012) · Biofabrication · doi:10.1088/1758-5082/4/3/035005 · Cited by 683
Advanced Bioinks for 3D Printing: A Materials Science Perspective
Chimene, D., Lennox, K. K., Kaunas, R. R., & Gaharwar, A. K. (2016) · Annals of Biomedical Engineering · doi:10.1007/s10439-016-1638-y · Cited by 679
Jang, J., Park, H.-J., Kim, S.-W., Kim, H., Park, J. Y., Na, S. J., Kim, H. J., Park, M. N., Choi, S. H., Park, S. H., et al. (2017) · Biomaterials · doi:10.1016/j.biomaterials.2016.10.026 · Cited by 673
Bioprinted Amniotic Fluid-Derived Stem Cells Accelerate Healing of Large Skin Wounds
Skardal, A., Mack, D., Kapetanovic, E., Atala, A., Jackson, J. D., Yoo, J., & Soker, S. (2012) · Stem Cells Translational Medicine · doi:10.5966/sctm.2012-0088 · Cited by 660
Stimuli-responsive polymer gels
Ahn, S.-K., Kasi, R. M., Kim, S.-C., Sharma, N., & Zhou, Y. (2008) · Soft Matter · doi:10.1039/b714376a · Cited by 649
Gauvin, R., Chen, Y.-C., Lee, J. W., Soman, P., Zorlutuna, P., Nichol, J. W., Bae, H., Chen, S., & Khademhosseini, A. (2012) · Biomaterials · doi:10.1016/j.biomaterials.2012.01.048 · Cited by 641
Biofabrication: A Guide to Technology and Terminology
Moroni, L., Boland, T., Burdick, J. A., De Maria, C., Derby, B., Forgacs, G., Groll, J., Li, Q., Malda, J., Mironov, V. A., et al. (2018) · Trends in Biotechnology · doi:10.1016/j.tibtech.2017.10.015 · Cited by 636
Self-citationWriting in the granular gel medium
Bhattacharjee, T., Zehnder, S. M., Rowe, K. G., Jain, S., Nixon, R. M., Sawyer, W. G., & Angelini, T. E. (2015) · Science Advances · doi:10.1126/sciadv.1500655 · Cited by 635
Wang, Z., Abdulla, R., Parker, B., Samanipour, R., Ghosh, S., & Kim, K. (2015) · Biofabrication · doi:10.1088/1758-5090/7/4/045009 · Cited by 633
Xu, T., Binder, K. W., Albanna, M. Z., Dice, D., Zhao, W., Yoo, J. J., & Atala, A. (2012) · Biofabrication · doi:10.1088/1758-5082/5/1/015001 · Cited by 631
Michael, S., Sorg, H., Peck, C.-T., Koch, L., Deiwick, A., Chichkov, B., Vogt, P. M., & Reimers, K. (2013) · PLoS ONE · doi:10.1371/journal.pone.0057741 · Cited by 623
Calixarene-based supramolecular polymerization in solution
Guo, D.-S., & Liu, Y. (2012) · Chemical Society Reviews · doi:10.1039/c2cs35075k · Cited by 620
Enzyme-catalyzed crosslinkable hydrogels: Emerging strategies for tissue engineering
Moreira Teixeira, L. S., Feijen, J., van Blitterswijk, C. A., Dijkstra, P. J., & Karperien, M. (2012) · Biomaterials · doi:10.1016/j.biomaterials.2011.10.067 · Cited by 615
A three-dimensional osteochondral composite scaffold for articular cartilage repair
Sherwood, J. K., Riley, S. L., Palazzolo, R., Brown, S. C., Monkhouse, D. C., Coates, M., Griffith, L. G., Landeen, L. K., & Ratcliffe, A. (2002) · Biomaterials · doi:10.1016/s0142-9612(02)00223-5 · Cited by 610
Xu, T., Zhao, W., Zhu, J.-M., Albanna, M. Z., Yoo, J. J., & Atala, A. (2013) · Biomaterials · doi:10.1016/j.biomaterials.2012.09.035 · Cited by 607
3D Printing of Shear-Thinning Hyaluronic Acid Hydrogels with Secondary Cross-Linking
Ouyang, L., Highley, C. B., Rodell, C. B., Sun, W., & Burdick, J. A. (2016) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.6b00158 · Cited by 607
Yin, J., Yan, M., Wang, Y., Fu, J., & Suo, H. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b16059 · Cited by 598
Methods of synthesis of hydrogels … A review
Akhtar, M. F., Hanif, M., & Ranjha, N. M. (2016) · Saudi Pharmaceutical Journal · doi:10.1016/j.jsps.2015.03.022 · Cited by 597
A Multimaterial Bioink Method for 3D Printing Tunable, Cell‐Compatible Hydrogels
Rutz, A. L., Hyland, K. E., Jakus, A. E., Burghardt, W. R., & Shah, R. N. (2015) · Advanced Materials · doi:10.1002/adma.201405076 · Cited by 572
Shear-thinning and self-healing hydrogels as injectable therapeutics and for 3D-printing
Loebel, C., Rodell, C. B., Chen, M. H., & Burdick, J. A. (2017) · Nature Protocols · doi:10.1038/nprot.2017.053 · Cited by 565
Das, S., Pati, F., Choi, Y.-J., Rijal, G., Shim, J.-H., Kim, S. W., Ray, A. R., Cho, D.-W., & Ghosh, S. (2015) · Acta Biomaterialia · doi:10.1016/j.actbio.2014.09.023 · Cited by 553
Physical chemistry of supramolecular polymer networks
Seiffert, S., & Sprakel, J. (2012) · Chem. Soc. Rev. · doi:10.1039/c1cs15191f · Cited by 552
Engineering alginate as bioink for bioprinting
Jia, J., Richards, D. J., Pollard, S., Tan, Y., Rodriguez, J., Visconti, R. P., Trusk, T. C., Yost, M. J., Yao, H., Markwald, R. R., et al. (2014) · Acta Biomaterialia · doi:10.1016/j.actbio.2014.06.034 · Cited by 549
Lutz, J.-F., & Zarafshani, Z. (2008) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2008.02.004 · Cited by 549
Bioinks and bioprinting technologies to make heterogeneous and biomimetic tissue constructs
Ashammakhi, N., Ahadian, S., Xu, C., Montazerian, H., Ko, H., Nasiri, R., Barros, N., & Khademhosseini, A. (2019) · Materials Today Bio · doi:10.1016/j.mtbio.2019.100008 · Cited by 549
Three-dimensional printing of Hela cells for cervical tumor model in vitro
Zhao, Y., Yao, R., Ouyang, L., Ding, H., Zhang, T., Zhang, K., Cheng, S., & Sun, W. (2014) · Biofabrication · doi:10.1088/1758-5082/6/3/035001 · Cited by 534
4D Printing with Mechanically Robust, Thermally Actuating Hydrogels
Bakarich, S. E., Gorkin, R., Panhuis, M. I. H., & Spinks, G. M. (2015) · Macromolecular Rapid Communications · doi:10.1002/marc.201500079 · Cited by 526
Supramolecular polymer networks: hydrogels and bulk materials
Voorhaar, L., & Hoogenboom, R. (2016) · Chemical Society Reviews · doi:10.1039/c6cs00130k · Cited by 509
Extrusion Bioprinting of Shear‐Thinning Gelatin Methacryloyl Bioinks
Liu, W., Heinrich, M. A., Zhou, Y., Akpek, A., Hu, N., Liu, X., Guan, X., Zhong, Z., Jin, X., Khademhosseini, A., et al. (2017) · Advanced Healthcare Materials · doi:10.1002/adhm.201601451 · Cited by 503
‘Printability' of Candidate Biomaterials for Extrusion Based 3D Printing: State‐of‐the‐Art
Kyle, S., Jessop, Z. M., Al‐Sabah, A., & Whitaker, I. S. (2017) · Advanced Healthcare Materials · doi:10.1002/adhm.201700264 · Cited by 495
Recent Advances in Bioink Design for 3D Bioprinting of Tissues and Organs
Ji, S., & Guvendiren, M. (2017) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2017.00023 · Cited by 490
Current Status of Bioinks for Micro-Extrusion-Based 3D Bioprinting
Panwar, A., & Tan, L. (2016) · Molecules · doi:10.3390/molecules21060685 · Cited by 472
Chen, P., Zheng, L., Wang, Y., Tao, M., Xie, Z., Xia, C., Gu, C., Chen, J., Qiu, P., Mei, S., et al. (2019) · Theranostics · doi:10.7150/thno.31017 · Cited by 462
Ultrahigh-Water-Content Supramolecular Hydrogels Exhibiting Multistimuli Responsiveness
Appel, E. A., Loh, X. J., Jones, S. T., Biedermann, F., Dreiss, C. A., & Scherman, O. A. (2012) · Journal of the American Chemical Society · doi:10.1021/ja3044568 · Cited by 443
Duan, B., Kapetanovic, E., Hockaday, L. A., & Butcher, J. T. (2014) · Acta Biomaterialia · doi:10.1016/j.actbio.2013.12.005 · Cited by 436
A comparison of different bioinks for 3D bioprinting of fibrocartilage and hyaline cartilage
Daly, A. C., Critchley, S. E., Rencsok, E. M., & Kelly, D. J. (2016) · Biofabrication · doi:10.1088/1758-5090/8/4/045002 · Cited by 436
3D and 4D Printing of Polymers for Tissue Engineering Applications
Tamay, D. G., Dursun Usal, T., Alagoz, A. S., Yucel, D., Hasirci, N., & Hasirci, V. (2019) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2019.00164 · Cited by 417
Pepelanova, I., Kruppa, K., Scheper, T., & Lavrentieva, A. (2018) · Bioengineering · doi:10.3390/bioengineering5030055 · Cited by 416
Xing, B., Yu, C.-W., Chow, K.-H., Ho, P.-L., Fu, D., & Xu, B. (2002) · Journal of the American Chemical Society · doi:10.1021/ja028539f · Cited by 407
Gelatin as Biomaterial for Tissue Engineering
Echave, M. C., Burgo, L. S., Pedraz, J. L., & Orive, G. (2017) · Current Pharmaceutical Design · doi:10.2174/0929867324666170511123101 · Cited by 396
Alginate Sulfate–Nanocellulose Bioinks for Cartilage Bioprinting Applications
Müller, M., Öztürk, E., Arlov, Ø., Gatenholm, P., & Zenobi-Wong, M. (2017) · Annals of Biomedical Engineering · doi:10.1007/s10439-016-1704-5 · Cited by 389
Gold Nanocomposite Bioink for Printing 3D Cardiac Constructs
Zhu, K., Shin, S. R., van Kempen, T., Li, Y., Ponraj, V., Nasajpour, A., Mandla, S., Hu, N., Liu, X., Leijten, J., et al. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201605352 · Cited by 386
Biofabrication of tissue constructs by 3D bioprinting of cell-laden microcarriers
Levato, R., Visser, J., Planell, J. A., Engel, E., Malda, J., & Mateos-Timoneda, M. A. (2014) · Biofabrication · doi:10.1088/1758-5082/6/3/035020 · Cited by 380
Bio-inks for 3D bioprinting: recent advances and future prospects
Donderwinkel, I., van Hest, J. C. M., & Cameron, N. R. (2017) · Polymer Chemistry · doi:10.1039/c7py00826k · Cited by 378
A 3D bioprinted complex structure for engineering the muscle–tendon unit
Merceron, T. K., Burt, M., Seol, Y.-J., Kang, H.-W., Lee, S. J., Yoo, J. J., & Atala, A. (2015) · Biofabrication · doi:10.1088/1758-5090/7/3/035003 · Cited by 373
(2011) · Elsevier eBooks · doi:10.1016/c2009-1-28384-5 · Cited by 368
Gao, F., Xu, Z., Liang, Q., Li, H., Peng, L., Wu, M., Zhao, X., Cui, X., Ruan, C., & Liu, W. (2019) · Advanced Science · doi:10.1002/advs.201900867 · Cited by 365
Self-citationNew Visible-Light Photoinitiating System for Improved Print Fidelity in Gelatin-Based Bioinks
Lim, K. S., Schon, B. S., Mekhileri, N. V., Brown, G. C. J., Chia, C. M., Prabakar, S., Hooper, G. J., & Woodfield, T. B. F. (2016) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.6b00149 · Cited by 362
Self-citationMouser, V. H. M., Melchels, F. P. W., Visser, J., Dhert, W. J. A., Gawlitta, D., & Malda, J. (2016) · Biofabrication · doi:10.1088/1758-5090/8/3/035003 · Cited by 359
Bioprinting technology and its applications
Seol, Y.-J., Kang, H.-W., Lee, S. J., Atala, A., & Yoo, J. J. (2014) · European Journal of Cardio-Thoracic Surgery · doi:10.1093/ejcts/ezu148 · Cited by 355
Multi‐nozzle deposition for construction of 3D biopolymer tissue scaffolds
Khalil, S., Nam, J., & Sun, W. (2005) · Rapid Prototyping Journal · doi:10.1108/13552540510573347 · Cited by 351
Gao, G., Schilling, A. F., Yonezawa, T., Wang, J., Dai, G., & Cui, X. (2014) · Biotechnology Journal · doi:10.1002/biot.201400305 · Cited by 351
Self-citationToward engineering functional organ modules by additive manufacturing
Marga, F., Jakab, K., Khatiwala, C., Shepherd, B., Dorfman, S., Hubbard, B., Colbert, S., & Gabor, F. (2012) · Biofabrication · doi:10.1088/1758-5082/4/2/022001 · Cited by 348
Engineering an in vitro air-blood barrier by 3D bioprinting
Horváth, L., Umehara, Y., Jud, C., Blank, F., Petri-Fink, A., & Rothen-Rutishauser, B. (2015) · Scientific Reports · doi:10.1038/srep07974 · Cited by 345
Jang, J., Kim, T. G., Kim, B. S., Kim, S.-W., Kwon, S.-M., & Cho, D.-W. (2016) · Acta Biomaterialia · doi:10.1016/j.actbio.2016.01.013 · Cited by 344
Bioprinting Endothelial Cells With Alginate for 3D Tissue Constructs
Khalil, S., & Sun, W. (2009) · Journal of Biomechanical Engineering · doi:10.1115/1.3128729 · Cited by 337
Gao, G., Lee, J. H., Jang, J., Lee, D. H., Kong, J., Kim, B. S., Choi, Y., Jang, W. B., Hong, Y. J., Kwon, S., et al. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201700798 · Cited by 336
Survival and Proliferative Ability of Various Living Cell Types after Laser-Induced Forward Transfer
Hopp, B., Smausz, T., Kresz, N., Barna, N., Bor, Z., Kolozsvári, L., Chrisey, D. B., Szabó, A., & Nógrádi, A. (2005) · Tissue Engineering · doi:10.1089/ten.2005.11.1817 · Cited by 333
Thiol–Ene Clickable Gelatin: A Platform Bioink for Multiple 3D Biofabrication Technologies
Bertlein, S., Brown, G., Lim, K. S., Jungst, T., Boeck, T., Blunk, T., Tessmar, J., Hooper, G. J., Woodfield, T. B. F., & Groll, J. (2017) · Advanced Materials · doi:10.1002/adma.201703404 · Cited by 331
Self-citationCostantini, M., Testa, S., Mozetic, P., Barbetta, A., Fuoco, C., Fornetti, E., Tamiro, F., Bernardini, S., Jaroszewicz, J., Święszkowski, W., et al. (2017) · Biomaterials · doi:10.1016/j.biomaterials.2017.03.026 · Cited by 330
Lee, H., Han, W., Kim, H., Ha, D.-H., Jang, J., Kim, B. S., & Cho, D.-W. (2017) · Biomacromolecules · doi:10.1021/acs.biomac.6b01908 · Cited by 328
Levato, R., Webb, W. R., Otto, I. A., Mensinga, A., Zhang, Y., van Rijen, M., van Weeren, R., Khan, I. M., & Malda, J. (2017) · Acta Biomaterialia · doi:10.1016/j.actbio.2017.08.005 · Cited by 326
Advances in Bioactive Hydrogels to Probe and Direct Cell Fate
DeForest, C. A., & Anseth, K. S. (2012) · Annual Review of Chemical and Biomolecular Engineering · doi:10.1146/annurev-chembioeng-062011-080945 · Cited by 323
Zhao, Y., Li, Y., Mao, S., Sun, W., & Yao, R. (2015) · Biofabrication · doi:10.1088/1758-5090/7/4/045002 · Cited by 312
KLEBE, R. (1988) · Experimental Cell Research · doi:10.1016/0014-4827(88)90275-3 · Cited by 310
Gaetani, R., Feyen, D. A. M., Verhage, V., Slaats, R., Messina, E., Christman, K. L., Giacomello, A., Doevendans, P. A. F. M., & Sluijter, J. P. G. (2015) · Biomaterials · doi:10.1016/j.biomaterials.2015.05.005 · Cited by 307
Evolution of Bioinks and Additive Manufacturing Technologies for 3D Bioprinting
Jose, R. R., Rodriguez, M. J., Dixon, T. A., Omenetto, F., & Kaplan, D. L. (2016) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.6b00088 · Cited by 302
Development of a clay based bioink for 3D cell printing for skeletal application
Ahlfeld, T., Cidonio, G., Kilian, D., Duin, S., Akkineni, A. R., Dawson, J. I., Yang, S., Lode, A., Oreffo, R. O. C., & Gelinsky, M. (2017) · Biofabrication · doi:10.1088/1758-5090/aa7e96 · Cited by 301
3D cell printing of functional skeletal muscle constructs using skeletal muscle-derived bioink
Choi, Y., Kim, T. G., Jeong, J., Yi, H., Park, J. W., Hwang, W., & Cho, D. (2016) · Advanced Healthcare Materials · doi:10.1002/adhm.201600483 · Cited by 298
Bio-resin for high resolution lithography-based biofabrication of complex cell-laden constructs
Lim, K. S., Levato, R., Costa, P. F., Castilho, M. D., Alcala-Orozco, C. R., van Dorenmalen, K. M. A., Melchels, F. P. W., Gawlitta, D., Hooper, G. J., Malda, J., et al. (2018) · Biofabrication · doi:10.1088/1758-5090/aac00c · Cited by 296
Self-citationKesti, M., Müller, M., Becher, J., Schnabelrauch, M., D’Este, M., Eglin, D., & Zenobi-Wong, M. (2015) · Acta Biomaterialia · doi:10.1016/j.actbio.2014.09.033 · Cited by 294
The Nano-Scale Mechanical Properties of the Extracellular Matrix Regulate Dermal Fibroblast Function
Achterberg, V. F., Buscemi, L., Diekmann, H., Smith-Clerc, J., Schwengler, H., Meister, J.-J., Wenck, H., Gallinat, S., & Hinz, B. (2014) · Journal of Investigative Dermatology · doi:10.1038/jid.2014.90 · Cited by 290
Martínez Ávila, H., Schwarz, S., Rotter, N., & Gatenholm, P. (2016) · Bioprinting · doi:10.1016/j.bprint.2016.08.003 · Cited by 282
Keriquel, V., Guillemot, F., Arnault, I., Guillotin, B., Miraux, S., Amédée, J., Fricain, J.-C., & Catros, S. (2010) · Biofabrication · doi:10.1088/1758-5082/2/1/014101 · Cited by 280
Translation of Human-Induced Pluripotent Stem Cells
Sayed, N., Liu, C., & Wu, J. C. (2016) · Journal of the American College of Cardiology · doi:10.1016/j.jacc.2016.01.083 · Cited by 279
Bjørge, I. M., Kim, S. Y., Mano, J. F., Kalionis, B., & Chrzanowski, W. (2018) · Biomaterials Science · doi:10.1039/c7bm00479f · Cited by 275
High-performance 3D printing of hydrogels by water-dispersible photoinitiator nanoparticles
Pawar, A. A., Saada, G., Cooperstein, I., Larush, L., Jackman, J. A., Tabaei, S. R., Cho, N.-J., & Magdassi, S. (2016) · Science Advances · doi:10.1126/sciadv.1501381 · Cited by 270
Starborg, T., Kalson, N. S., Lu, Y., Mironov, A., Cootes, T. F., Holmes, D. F., & Kadler, K. E. (2013) · Nature Protocols · doi:10.1038/nprot.2013.086 · Cited by 267
Hung, K.-C., Tseng, C.-S., Dai, L.-G., & Hsu, S.-H. (2016) · Biomaterials · doi:10.1016/j.biomaterials.2016.01.019 · Cited by 251
3D bioprinting of BM-MSCs-loaded ECM biomimetic hydrogels for in vitro neocartilage formation
Costantini, M., Idaszek, J., Szöke, K., Jaroszewicz, J., Dentini, M., Barbetta, A., Brinchmann, J. E., & Święszkowski, W. (2016) · Biofabrication · doi:10.1088/1758-5090/8/3/035002 · Cited by 250
Targeting extracellular vesicles to injured tissue using membrane cloaking and surface display
Antes, T. J., Middleton, R. C., Luther, K. M., Ijichi, T., Peck, K. A., Liu, W. J., Valle, J., Echavez, A. K., & Marbán, E. (2018) · Journal of Nanobiotechnology · doi:10.1186/s12951-018-0388-4 · Cited by 250
Nanoengineered Ionic–Covalent Entanglement (NICE) Bioinks for 3D Bioprinting
Chimene, D., Peak, C. W., Gentry, J. L., Carrow, J. K., Cross, L. M., Mondragon, E., Cardoso, G. B., Kaunas, R., & Gaharwar, A. K. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b19808 · Cited by 248
Lim, K. S., Klotz, B. J., Lindberg, G. C. J., Melchels, F. P. W., Hooper, G. J., Malda, J., Gawlitta, D., & Woodfield, T. B. F. (2019) · Macromolecular Bioscience · doi:10.1002/mabi.201900098 · Cited by 247
Self-citationCatros, S., Fricain, J.-C., Guillotin, B., Pippenger, B., Bareille, R., Remy, M., Lebraud, E., Desbat, B., Amédée, J., & Guillemot, F. (2011) · Biofabrication · doi:10.1088/1758-5082/3/2/025001 · Cited by 245
3D Bioprinting Using Cross-Linker-Free Silk–Gelatin Bioink for Cartilage Tissue Engineering
Singh, Y. P., Bandyopadhyay, A., & Mandal, B. B. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b11644 · Cited by 245
Mentkowski, K. I., & Lang, J. K. (2019) · Scientific Reports · doi:10.1038/s41598-019-46407-1 · Cited by 244
A Perspective on the Clinical Translation of Scaffolds for Tissue Engineering
Webber, M. J., Khan, O. F., Sydlik, S. A., Tang, B. C., & Langer, R. (2015) · Annals of Biomedical Engineering · doi:10.1007/s10439-014-1104-7 · Cited by 243
Extrusion bioprinting of soft materials: An emerging technique for biological model fabrication
Jiang, T., Munguia-Lopez, J. G., Flores-Torres, S., Kort-Mascort, J., & Kinsella, J. M. (2019) · Applied Physics Reviews · doi:10.1063/1.5059393 · Cited by 243
3D Bioprinting of Self‐Standing Silk‐Based Bioink
Zheng, Z., Wu, J., Liu, M., Wang, H., Li, C., Rodriguez, M. J., Li, G., Wang, X., & Kaplan, D. L. (2018) · Advanced Healthcare Materials · doi:10.1002/adhm.201701026 · Cited by 241
Injectable polymeric hydrogels for the delivery of therapeutic agents: A review
Nguyen, Q. V., Huynh, D. P., Park, J. H., & Lee, D. S. (2015) · European Polymer Journal · doi:10.1016/j.eurpolymj.2015.03.016 · Cited by 236
Mechanically Stiff Nanocomposite Hydrogels at Ultralow Nanoparticle Content
Jaiswal, M. K., Xavier, J. R., Carrow, J. K., Desai, P., Alge, D., & Gaharwar, A. K. (2016) · ACS Nano · doi:10.1021/acsnano.5b03918 · Cited by 233
3D bioprinting of photocrosslinkable hydrogel constructs
Pereira, R. F., & Bártolo, P. J. (2015) · Journal of Applied Polymer Science · doi:10.1002/app.42458 · Cited by 232
Emerging Roles for Extracellular Vesicles in Tissue Engineering and Regenerative Medicine
Lamichhane, T. N., Sokic, S., Schardt, J. S., Raiker, R. S., Lin, J. W., & Jay, S. M. (2015) · Tissue Engineering Part B: Reviews · doi:10.1089/ten.teb.2014.0300 · Cited by 230
Yeo, Y., Highley, C. B., Bellas, E., Ito, T., Marini, R., Langer, R., & Kohane, D. S. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2006.04.043 · Cited by 227
Development and characterisation of a new bioink for additive tissue manufacturing
Melchels, F. P. W., Dhert, W. J. A., Hutmacher, D. W., & Malda, J. (2014) · Journal of Materials Chemistry B · doi:10.1039/c3tb21280g · Cited by 222
Rodriguez, M. J., Brown, J., Giordano, J., Lin, S. J., Omenetto, F. G., & Kaplan, D. L. (2017) · Biomaterials · doi:10.1016/j.biomaterials.2016.11.046 · Cited by 220
Zhang, W., Feng, C., Yang, G., Li, G., Ding, X., Wang, S., Dou, Y., Zhang, Z., Chang, J., Wu, C., et al. (2017) · Biomaterials · doi:10.1016/j.biomaterials.2017.05.005 · Cited by 218
Bioactive hydrogels made from step-growth derived PEG–peptide macromers
Miller, J. S., Shen, C. J., Legant, W. R., Baranski, J. D., Blakely, B. L., & Chen, C. S. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.01.058 · Cited by 215
Park, J. Y., Choi, J.-C., Shim, J.-H., Lee, J.-S., Park, H., Kim, S. W., Doh, J., & Cho, D.-W. (2014) · Biofabrication · doi:10.1088/1758-5082/6/3/035004 · Cited by 213
Castro, N. J., O'Brien, J., & Zhang, L. G. (2015) · Nanoscale · doi:10.1039/c5nr03425f · Cited by 209
Biofabrication and testing of a fully cellular nerve graft
Owens, C. M., Marga, F., Forgacs, G., & Heesch, C. M. (2013) · Biofabrication · doi:10.1088/1758-5082/5/4/045007 · Cited by 204
Printability and Cell Viability in Bioprinting Alginate Dialdehyde-Gelatin Scaffolds
Soltan, N., Ning, L., Mohabatpour, F., Papagerakis, P., & Chen, X. (2019) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.9b00167 · Cited by 204
Bioprinting of tissue engineering scaffolds
Rider, P., Kačarević, Ž. P., Alkildani, S., Retnasingh, S., & Barbeck, M. (2018) · Journal of Tissue Engineering · doi:10.1177/2041731418802090 · Cited by 203
Agarose-Based Hydrogels as Suitable Bioprinting Materials for Tissue Engineering
López-Marcial, G. R., Zeng, A. Y., Osuna, C., Dennis, J., García, J. M., & O’Connell, G. D. (2018) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.8b00903 · Cited by 196
Osteogenic and angiogenic tissue formation in high fidelity nanocomposite Laponite-gelatin bioinks
Cidonio, G., Alcala-Orozco, C. R., Lim, K. S., Glinka, M., Mutreja, I., Kim, Y.-H., Dawson, J. I., Woodfield, T. B. F., & Oreffo, R. O. C. (2019) · Biofabrication · doi:10.1088/1758-5090/ab19fd · Cited by 190
Self-citation3D printing of biomimetic multi-layered GelMA/nHA scaffold for osteochondral defect repair
Liu, J., Li, L., Suo, H., Yan, M., Yin, J., & Fu, J. (2019) · Materials & Design · doi:10.1016/j.matdes.2019.107708 · Cited by 186
Automated 3D bioassembly of micro-tissues for biofabrication of hybrid tissue engineered constructs
Mekhileri, N. V., Lim, K. S., Brown, G. C. J., Mutreja, I., Schon, B. S., Hooper, G. J., & Woodfield, T. B. F. (2018) · Biofabrication · doi:10.1088/1758-5090/aa9ef1 · Cited by 185
Self-citation3D Bioprinting Using a Templated Porous Bioink
Armstrong, J. P. K., Burke, M., Carter, B. M., Davis, S. A., & Perriman, A. W. (2016) · Advanced Healthcare Materials · doi:10.1002/adhm.201600022 · Cited by 182
Kim, M. H., Lee, Y. W., Jung, W.-K., Oh, J., & Nam, S. Y. (2019) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2019.06.014 · Cited by 175
Nanomaterials for Engineering Stem Cell Responses
Kerativitayanan, P., Carrow, J. K., & Gaharwar, A. K. (2015) · Advanced Healthcare Materials · doi:10.1002/adhm.201500272 · Cited by 174
A dynamic and self-crosslinked polysaccharide hydrogel with autonomous self-healing ability
Ding, F., Wu, S., Wang, S., Xiong, Y., Li, Y., Li, B., Deng, H., Du, Y., Xiao, L., & Shi, X. (2015) · Soft Matter · doi:10.1039/c5sm00587f · Cited by 174
Kowalczewski, C. J., & Saul, J. M. (2018) · Frontiers in Pharmacology · doi:10.3389/fphar.2018.00513 · Cited by 170
Bioprinting of a Cell-Laden Conductive Hydrogel Composite
Spencer, A. R., Shirzaei Sani, E., Soucy, J. R., Corbet, C. C., Primbetova, A., Koppes, R. A., & Annabi, N. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b07353 · Cited by 168
Liquid-like Solids Support Cells in 3D
Bhattacharjee, T., Gil, C. J., Marshall, S. L., Urueña, J. M., O’Bryan, C. S., Carstens, M., Keselowsky, B., Palmer, G. D., Ghivizzani, S., Gibbs, C. P., et al. (2016) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.6b00218 · Cited by 165
Digital micromirror device projection printing system for meniscus tissue engineering
Grogan, S. P., Chung, P. H., Soman, P., Chen, P., Lotz, M. K., Chen, S., & D’Lima, D. D. (2013) · Acta Biomaterialia · doi:10.1016/j.actbio.2013.03.020 · Cited by 162
Kim, S., Kim, D. Y., Roh, H.-H., Kim, H. S., Lee, J. W., & Lee, K. Y. (2019) · Biomacromolecules · doi:10.1021/acs.biomac.8b01589 · Cited by 162
Rapid Photocrosslinking of Silk Hydrogels with High Cell Density and Enhanced Shape Fidelity
Cui, X., Soliman, B. G., Alcala‐Orozco, C. R., Li, J., Vis, M. A. M., Santos, M., Wise, S. G., Levato, R., Malda, J., Woodfield, T. B. F., et al. (2020) · Advanced Healthcare Materials · doi:10.1002/adhm.201901667 · Cited by 159
Self-citationPark, J., Lee, S. J., Chung, S., Lee, J. H., Kim, W. D., Lee, J. Y., & Park, S. A. (2016) · Materials Science and Engineering C · doi:10.1016/j.msec.2016.10.069 · Cited by 158
Bioprinting Vasculature: Materials, Cells and Emergent Techniques
Tomasina, C., Bodet, T., Mota, C., Moroni, L., & Camarero‐Espinosa, S. (2019) · Materials · doi:10.3390/ma12172701 · Cited by 155
In vitroevaluation of carbon-nanotube-reinforced bioprintable vascular conduits
Dolati, F., Yu, Y., Zhang, Y., Jesús, A. M. D., Sander, E. A., & Ozbolat, I. T. (2014) · Nanotechnology · doi:10.1088/0957-4484/25/14/145101 · Cited by 154
Cornwell, K. G., Lei, P., Andreadis, S. T., & Pins, G. D. (2006) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.30893 · Cited by 153
Dubbin, K., Hori, Y., Lewis, K. K., & Heilshorn, S. C. (2016) · Advanced Healthcare Materials · doi:10.1002/adhm.201600636 · Cited by 153
Self-assembling peptide hydrogel for intervertebral disc tissue engineering
Wan, S., Borland, S. J., Richardson, S. M., Merry, C. L. R., Saiani, A., & Gough, J. E. (2016) · Acta Biomaterialia · doi:10.1016/j.actbio.2016.09.033 · Cited by 146
Jiang, T., Munguia-López, J. G., Flores-Torres, S., Grant, J., Vijayakumar, S., León‐Rodríguez, A. D., & Kinsella, J. M. (2017) · Scientific Reports · doi:10.1038/s41598-017-04691-9 · Cited by 141
Catros, S., Guillotin, B., Bačáková, M., Fricain, J., & Guillemot, F. (2010) · Applied Surface Science · doi:10.1016/j.apsusc.2010.11.049 · Cited by 140
Tang, J.-N., Cui, X.-L., Caranasos, T., Hensley, M. T., Vandergriff, A., Hartanto, Y., Shen, D.-L., Zhang, H., Zhang, J.-Y., & Cheng, K. (2017) · ACS Nano · doi:10.1021/acsnano.7b01008 · Cited by 138
Self-citationInjectable silk-polyethylene glycol hydrogels
Wang, X., Partlow, B. P., Liu, J., Zheng, Z., Su, B., Wang, Y., & Kaplan, D. L. (2014) · Acta Biomaterialia · doi:10.1016/j.actbio.2014.10.027 · Cited by 136
Abbadessa, A., Blokzijl, M. M., Mouser, V. H. M., Marica, P., Malda, J., Hennink, W. E., & Vermonden, T. (2016) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2016.04.080 · Cited by 135
3D cell bioprinting of self-assembling peptide-based hydrogels
Raphael, B., Khalil, T., Workman, V. L., Smith, A. M., Brown, C., Streuli, C. H., Saiani, A., & Domingos, M. A. N. (2017) · Materials Letters · doi:10.1016/j.matlet.2016.12.127 · Cited by 133
Dispensing pico to nanolitre of a natural hydrogel by laser-assisted bioprinting
Gruene, M., Unger, C., Koch, L., Deiwick, A., & Chichkov, B. N. (2011) · BioMedical Engineering OnLine · doi:10.1186/1475-925x-10-19 · Cited by 132
Das, S., Pati, F., Chameettachal, S., Pahwa, S., Ray, A. R., Dhara, S., & Ghosh, S. (2013) · Biomacromolecules · doi:10.1021/bm301193t · Cited by 126
Effects of UV radiation on cells
Moan, J. E., & Peak, M. J. (1989) · Journal of Photochemistry and Photobiology B Biology · doi:10.1016/1011-1344(89)80099-5 · Cited by 122
3D Cell Printed Tissue Analogues: A New Platform for Theranostics
Choi, Y., Yi, H., Kim, S.-W., & Cho, D. (2017) · Theranostics · doi:10.7150/thno.19396 · Cited by 121
Ouyang, L., Yao, R., Chen, X., Na, J., & Sun, W. (2015) · Biofabrication · doi:10.1088/1758-5090/7/1/015010 · Cited by 120
Costantini, M., Colosi, C., Święszkowski, W., & Barbetta, A. (2018) · Biofabrication · doi:10.1088/1758-5090/aae605 · Cited by 116
A Thermogelling Supramolecular Hydrogel with Sponge-Like Morphology as a Cytocompatible Bioink
Lorson, T., Jaksch, S., Lübtow, M. M., Jüngst, T., Gröll, J., Lühmann, T. C., & Luxenhofer, R. (2017) · Biomacromolecules · doi:10.1021/acs.biomac.7b00481 · Cited by 114
Köpf, M., Campos, D. F. D., Blaeser, A., Sen, K. S., & Fischer, H. (2016) · Biofabrication · doi:10.1088/1758-5090/8/2/025011 · Cited by 113
3D Bioprinting of Functional Islets of Langerhans in an Alginate/Methylcellulose Hydrogel Blend
Duin, S., Schütz, K., Ahlfeld, T., Lehmann, S., Lode, A., Ludwig, B., & Gelinsky, M. (2019) · Advanced Healthcare Materials · doi:10.1002/adhm.201801631 · Cited by 113
3D Printing Polymers with Supramolecular Functionality for Biological Applications
Pekkanen, A. M., Mondschein, R. J., Williams, C. B., & Long, T. E. (2017) · Biomacromolecules · doi:10.1021/acs.biomac.7b00671 · Cited by 112
Recent Strategies in Extrusion-Based Three-Dimensional Cell Printing toward Organ Biofabrication
Gao, G., Kim, B. S., Jang, J., & Cho, D. (2019) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.8b00691 · Cited by 109
Thiol-ene Clickable Poly(glycidol) Hydrogels for Biofabrication
Stichler, S., Jüngst, T., Schamel, M., Zilkowski, I., Kuhlmann, M., Bock, T. A., Blunk, T., Teßmar, J., & Gröll, J. (2016) · Annals of Biomedical Engineering · doi:10.1007/s10439-016-1633-3 · Cited by 108
Fast Setting Silk Fibroin Bioink for Bioprinting of Patient‐Specific Memory‐Shape Implants
Costa, J. B., Silva‐Correia, J., Oliveira, J. M., & Reis, R. L. (2017) · Advanced Healthcare Materials · doi:10.1002/adhm.201701021 · Cited by 108
Polyol-Silk Bioink Formulations as Two-Part Room-Temperature Curable Materials for 3D Printing
Jose, R. R., Brown, J. E., Polido, K. E., Omenetto, F. G., & Kaplan, D. L. (2015) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.5b00160 · Cited by 106
Hydrogel-based reinforcement of 3D bioprinted constructs
Melchels, F. P. W., Blokzijl, M. M., Levato, R., Peiffer, Q. C., de Ruijter, M., Hennink, W. E., Vermonden, T., & Malda, J. (2016) · Biofabrication · doi:10.1088/1758-5090/8/3/035004 · Cited by 104
Porous bioprinted constructs in BMP-2 non-viral gene therapy for bone tissue engineering
Loozen, L. D., Wegman, F., Öner, F. C., Dhert, W. J. A., & Alblas, J. (2013) · Journal of Materials Chemistry B · doi:10.1039/c3tb21093f · Cited by 103
Double-Network Polyurethane-Gelatin Hydrogel with Tunable Modulus for High-Resolution 3D Bioprinting
Hsieh, C., & Hsu, S. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b10784 · Cited by 102
Current status of three-dimensional printing inks for soft tissue regeneration
Kim, J. E., Kim, S. H., & Jung, Y. (2016) · Tissue Engineering and Regenerative Medicine · doi:10.1007/s13770-016-0125-8 · Cited by 101
Printing technology to produce living tissue
Mironov, V. A. (2003) · Expert Opinion on Biological Therapy · doi:10.1517/14712598.3.5.701 · Cited by 99
Photocrosslinkable and elastomeric hydrogels for bone regeneration
Thakur, T., Xavier, J. R., Cross, L., Jaiswal, M. K., Mondragón, E., Kaunas, R. R., & Gaharwar, A. K. (2015) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.35621 · Cited by 98
Cell(MC3T3‐E1)‐Printed Poly( ϵ ‐caprolactone)/Alginate Hybrid Scaffolds for Tissue Regeneration
Lee, H., Ahn, S., Bonassar, L. J., & Kim, G. (2012) · Macromolecular Rapid Communications · doi:10.1002/marc.201200524 · Cited by 97
Cited by
Printability and shape fidelity of bioinks in 3D bioprinting
Schwab, A., Levato, R., D’Este, M., Piluso, S., Eglin, D., & Malda, J. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00084 · Cited by 1,359
Additive Manufacturing of Polymer Materials: Progress, Promise and Challenges
Saleh Alghamdi, S., John, S., Roy Choudhury, N., & Dutta, N. K. (2021) · Polymers · doi:10.3390/polym13050753 · Cited by 469
Multifunctional GelMA platforms with nanomaterials for advanced tissue therapeutics
Kurian, A. G., Singh, R. K., Patel, K. D., Lee, J.-H., & Kim, H.-W. (2022) · Bioactive Materials · doi:10.1016/j.bioactmat.2021.06.027 · Cited by 444
Zhang, Y. S., Haghiashtiani, G., Hübscher, T., Kelly, D. J., Lee, J. M., Lutolf, M., McAlpine, M. C., Yeong, W. Y., Zenobi-Wong, M., & Malda, J. (2021) · Nature Reviews Methods Primers · doi:10.1038/s43586-021-00073-8 · Cited by 391
Fabrication of Biomedical Scaffolds Using Biodegradable Polymers.
Kirillova, A., Yeazel, T. R., Asheghali, D., Petersen, S. R., Dort, S., Gall, K., & Becker, M. L. (2021) · Chemical Reviews · doi:10.1021/acs.chemrev.0c01200 · Cited by 368
Metadata
- Authors
- Cui, X., Li, J., Hartanto, Y., Durham, M., Tang, J., Zhang, H., Hooper, G., Lim, K., & Woodfield, T.
- Venue
- Advanced Healthcare Materials
- Publisher
- Wiley
- Published
- 2020-04-30
- Volume
- 9
- Issue
- 15
- Pages
- e1901648-e1901648
- ISSN
- 2192-2640 (ISSN-L)
- 2192-2659
- OpenAlex
- W3023111417
- Cited by
- 383
- References
- 243
- FWCI
- 13.71
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.