The DOI matches its Crossref record; 303 of the 303 references it cites were found in a registry or an index.
Advances in Regenerative Medicine and Tissue Engineering: Innovation and Transformation of Medicine
Open accessAbstract
Humans and animals lose tissues and organs due to congenital defects, trauma, and diseases. The human body has a low regenerative potential as opposed to the urodele amphibians commonly referred to as salamanders. Globally, millions of people would benefit immensely if tissues and organs can be replaced on demand. Traditionally, transplantation of intact tissues and organs has been the bedrock to replace damaged and diseased parts of the body. The sole reliance on transplantation has created a waiting list of people requiring donated tissues and organs, and generally, supply cannot meet the demand. The total cost to society in terms of caring for patients with failing organs and debilitating diseases is enormous. Scientists and clinicians, motivated by the need to develop safe and reliable sources of tissues and organs, have been improving therapies and technologies that can regenerate tissues and in some cases create new tissues altogether. Tissue engineering and/or regenerative medicine are fields of life science employing both engineering and biological principles to create new tissues and organs and to promote the regeneration of damaged or diseased tissues and organs. Major advances and innovations are being made in the fields of tissue engineering and regenerative medicine and have a huge impact on three-dimensional bioprinting (3D bioprinting) of tissues and organs. 3D bioprinting holds great promise for artificial tissue and organ bioprinting, thereby revolutionizing the field of regenerative medicine. This review discusses how recent advances in the field of regenerative medicine and tissue engineering can improve 3D bioprinting and vice versa. Several challenges must be overcome in the application of 3D bioprinting before this disruptive technology is widely used to create organotypic constructs for regenerative medicine.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
2 retracted
RETRACTED: The first tissue-engineered airway transplantation: 5-year follow-up results
Gonfiotti, A., Jaus, M. O., Barale, D., Baiguera, S., Comin, C., Lavorini, F., Fontana, G., Sibila, O., Rombolà, G., Jungebluth, P., et al. (2014) · The Lancet · doi:10.1016/s0140-6736(13)62033-4 · Cited by 272
RetractedJin, P., Wu, H., Xu, G., Zheng, L. X., & Zhao, J. (2014) · Cell and Tissue Research · doi:10.1007/s00441-014-1797-9 · Cited by 84
Retracted3D bioprinting of tissues and organs
Murphy, S. V., & Atala, A. (2014) · Nature Biotechnology · doi:10.1038/nbt.2958 · Cited by 7,034
Hydrogels for tissue engineering: scaffold design variables and applications
Drury, J. L., & Mooney, D. J. (2003) · Biomaterials · doi:10.1016/s0142-9612(03)00340-5 · Cited by 5,136
An overview of tissue and whole organ decellularization processes
Crapo, P. M., Gilbert, T. W., & Badylak, S. F. (2011) · Biomaterials · doi:10.1016/j.biomaterials.2011.01.057 · Cited by 3,591
Perfusion-decellularized matrix: using nature's platform to engineer a bioartificial heart
Ott, H. C., Matthiesen, T. S., Goh, S.-K., Black, L. D., Kren, S. M., Netoff, T. I., & Taylor, D. A. (2008) · Nature Medicine · doi:10.1038/nm1684 · Cited by 2,650
The design of scaffolds for use in tissue engineering. Part I. Traditional factors
Yang, S., Leong, K.-F., Du, Z., & Chua, C.-K. (2001) · Tissue Engineering · doi:10.1089/107632701753337645 · Cited by 2,234
Biology of Bone Tissue: Structure, Function, and Factors That Influence Bone Cells
Florencio-Silva, R., Sasso, G. R. D. S., Sasso-Cerri, E., Simões, M. J., & Cerri, P. S. (2015) · BioMed Research International · doi:10.1155/2015/421746 · Cited by 2,044
Rapid casting of patterned vascular networks for perfusable engineered three-dimensional tissues
Miller, J. S., Stevens, K. R., Yang, M. T., Baker, B. M., Nguyen, D.-H. T., Cohen, D. M., Toro, E., Chen, A. A., Galie, P. A., Yu, X., et al. (2012) · Nature Materials · doi:10.1038/nmat3357 · Cited by 1,917
Tissue-engineered autologous bladders for patients needing cystoplasty
Atala, A., Bauer, S. B., Soker, S., Yoo, J. J., & Retik, A. B. (2006) · The Lancet · doi:10.1016/s0140-6736(06)68438-9 · Cited by 1,833
Immunogenicity of induced pluripotent stem cells
Zhao, T., Zhang, Z.-N., Rong, Z., & Xu, Y. (2011) · Nature · doi:10.1038/nature10135 · Cited by 1,444
Designing materials to direct stem-cell fate
Lutolf, M. P., Gilbert, P. M., & Blau, H. M. (2009) · Nature · doi:10.1038/nature08602 · Cited by 1,393
Lee, K., Silva, E. A., & Mooney, D. J. (2011) · Journal of The Royal Society Interface · doi:10.1098/rsif.2010.0223 · Cited by 1,386
Uygun, B. E., Soto-Gutierrez, A., Yagi, H., Izamis, M.-L., Guzzardi, M. A., Shulman, C., Milwid, J., Kobayashi, N., Tilles, A., Berthiaume, F., et al. (2010) · Nature Medicine · doi:10.1038/nm.2170 · Cited by 1,370
A review of trends and limitations in hydrogel-rapid prototyping for tissue engineering
Billiet, T., Vandenhaute, M., Schelfhout, J., Van Vlierberghe, S., & Dubruel, P. (2012) · Biomaterials · doi:10.1016/j.biomaterials.2012.04.050 · Cited by 1,284
Organ printing: Tissue spheroids as building blocks
Mironov, V., Visconti, R. P., Kasyanov, V., Forgacs, G., Drake, C. J., & Markwald, R. R. (2009) · Biomaterials · doi:10.1016/j.biomaterials.2008.12.084 · Cited by 1,238
Mesenchymal stem cells: environmentally responsive therapeutics for regenerative medicine
Murphy, M. B., Moncivais, K., & Caplan, A. I. (2013) · Experimental & Molecular Medicine · doi:10.1038/emm.2013.94 · Cited by 1,231
3D-printing techniques in a medical setting: a systematic literature review
Tack, P., Victor, J., Gemmel, P., & Annemans, L. (2016) · BioMedical Engineering OnLine · doi:10.1186/s12938-016-0236-4 · Cited by 1,098
Badylak, S. F., Taylor, D., & Uygun, K. (2011) · Annual Review of Biomedical Engineering · doi:10.1146/annurev-bioeng-071910-124743 · Cited by 1,041
Billiet, T., Gevaert, E., De Schryver, T., Cornelissen, M., & Dubruel, P. (2014) · Biomaterials · doi:10.1016/j.biomaterials.2013.09.078 · Cited by 1,015
Bioprinting 3D microfibrous scaffolds for engineering endothelialized myocardium and heart-on-a-chip
Zhang, Y. S., Arneri, A., Bersini, S., Shin, S.-R., Zhu, K., Goli-Malekabadi, Z., Aleman, J., Colosi, C., Busignani, F., Dell'Erba, V., et al. (2016) · Biomaterials · doi:10.1016/j.biomaterials.2016.09.003 · Cited by 951
3D Printing of Scaffolds for Tissue Regeneration Applications
Do, A., Khorsand, B., Geary, S. M., & Salem, A. K. (2015) · Advanced Healthcare Materials · doi:10.1002/adhm.201500168 · Cited by 949
Regenerative medicine: Current therapies and future directions
Mao, A. S., & Mooney, D. J. (2015) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1508520112 · Cited by 941
Vascularization Strategies for Tissue Engineering
Lovett, M., Lee, K., Edwards, A., & Kaplan, D. L. (2009) · Tissue Engineering Part B: Reviews · doi:10.1089/ten.teb.2009.0085 · Cited by 923
Direct 3D bioprinting of perfusable vascular constructs using a blend bioink
Jia, W., Gungor-Ozkerim, P. S., Zhang, Y. S., Yue, K., Zhu, K., Liu, W., Pi, Q., Byambaa, B., Dokmeci, M. R., Shin, S. R., et al. (2016) · Biomaterials · doi:10.1016/j.biomaterials.2016.07.038 · Cited by 922
Macrophages in skin injury and repair
Delavary, B. M., van der Veer, W. M., van Egmond, M., Niessen, F. B., & Beelen, R. H. J. (2011) · Immunobiology · doi:10.1016/j.imbio.2011.01.001 · Cited by 922
Laser assisted bioprinting of engineered tissue with high cell density and microscale organization
Guillotin, B., Souquet, A., Catros, S., Duocastella, M., Pippenger, B., Bellance, S., Bareille, R., Rémy, M., Bordenave, L., Amédée, J., et al. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.05.055 · Cited by 832
Benoit, D. S. W., Schwartz, M. P., Durney, A. R., & Anseth, K. S. (2008) · Nature Materials · doi:10.1038/nmat2269 · Cited by 825
Organogenesis and development of the liver
Si-Tayeb, K., Lemaigre, F. P., & Duncan, S. A. (2010) · Developmental Cell · doi:10.1016/j.devcel.2010.01.011 · Cited by 800
Hematopoietic stem cell niche maintenance during homeostasis and regeneration
Mendelson, A., & Frenette, P. S. (2014) · Nature Medicine · doi:10.1038/nm.3647 · Cited by 792
Administration of CD34+ cells after stroke enhances neurogenesis via angiogenesisin a mouse model
Taguchi, A., Soma, T., Tanaka, H., Kanda, T., Nishimura, H., Yoshikawa, H., Tsukamoto, Y., Iso, H., Fujimori, Y., Stern, D. M., et al. (2004) · Journal of Clinical Investigation · doi:10.1172/jci200420622 · Cited by 784
Macrophage activation and its role in repair and pathology after spinal cord injury
Gensel, J. C., & Zhang, B. (2015) · Brain Research · doi:10.1016/j.brainres.2014.12.045 · Cited by 771
Shirazi, S. F. S., Gharehkhani, S., Mehrali, M., Yarmand, H., Metselaar, H. S. C., Adib Kadri, N., & Osman, N. A. A. (2015) · Science and Technology of Advanced Materials · doi:10.1088/1468-6996/16/3/033502 · Cited by 755
A review of rapid prototyping techniques for tissue engineering purposes
Peltola, S. M., Melchels, F. P. W., Grijpma, D. W., & Kellomäki, M. (2008) · Annals of Medicine · doi:10.1080/07853890701881788 · Cited by 751
Designing degradable hydrogels for orthogonal control of cell microenvironments
Kharkar, P. M., Kiick, K. L., & Kloxin, A. M. (2013) · Chem. Soc. Rev. · doi:10.1039/c3cs60040h · Cited by 717
Growth and transplantation of a custom vascularised bone graft in a man
Warnke, P., Springer, I., Wiltfang, J., Acil, Y., Eufinger, H., Wehmöller, M., Russo, P., Bolte, H., Sherry, E., Behrens, E., et al. (2004) · The Lancet · doi:10.1016/s0140-6736(04)16935-3 · Cited by 717
Multifunctional chondroitin sulphate for cartilage tissue–biomaterial integration
Wang, D.-A., Varghese, S., Sharma, B., Strehin, I., Fermanian, S., Gorham, J., Fairbrother, D. H., Cascio, B., & Elisseeff, J. H. (2007) · Nature Materials · doi:10.1038/nmat1890 · Cited by 693
Direct Human Cartilage Repair Using Three-Dimensional Bioprinting Technology
Cui, X., Breitenkamp, K., Finn, M. G., Lotz, M., & D'Lima, D. D. (2012) · Tissue Engineering Part A · doi:10.1089/ten.tea.2011.0543 · Cited by 686
Bioprinted Amniotic Fluid-Derived Stem Cells Accelerate Healing of Large Skin Wounds
Skardal, A., Mack, D., Kapetanovic, E., Atala, A., Jackson, J. D., Yoo, J., & Soker, S. (2012) · Stem Cells Translational Medicine · doi:10.5966/sctm.2012-0088 · Cited by 660
Clinical application of growth factors and cytokines in wound healing
Barrientos, S., Brem, H., Stojadinovic, O., & Tomic‐Canic, M. (2014) · Wound Repair and Regeneration · doi:10.1111/wrr.12205 · Cited by 635
Wang, Z., Abdulla, R., Parker, B., Samanipour, R., Ghosh, S., & Kim, K. (2015) · Biofabrication · doi:10.1088/1758-5090/7/4/045009 · Cited by 633
3D biofabrication strategies for tissue engineering and regenerative medicine
Bajaj, P., Schweller, R. M., Khademhosseini, A., West, J. L., & Bashir, R. (2014) · Annual Review of Biomedical Engineering · doi:10.1146/annurev-bioeng-071813-105155 · Cited by 632
Xu, T., Binder, K. W., Albanna, M. Z., Dice, D., Zhao, W., Yoo, J. J., & Atala, A. (2012) · Biofabrication · doi:10.1088/1758-5082/5/1/015001 · Cited by 631
Role of platelet‐derived growth factor in wound healing
Pierce, G. F., Mustoe, T. A., Altrock, B. W., Deuel, T. F., & Thomason, A. (1991) · Journal of Cellular Biochemistry · doi:10.1002/jcb.240450403 · Cited by 618
A liver-on-a-chip platform with bioprinted hepatic spheroids
Bhise, N. S., Manoharan, V., Massa, S., Tamayol, A., Ghaderi, M., Miscuglio, M., Lang, Q., Shrike Zhang, Y., Shin, S. R., Calzone, G., et al. (2016) · Biofabrication · doi:10.1088/1758-5090/8/1/014101 · Cited by 615
Biofabrication of bone tissue: approaches, challenges and translation for bone regeneration
Tang, D., Tare, R. S., Yang, L.-Y., Williams, D. F., Ou, K.-L., & Oreffo, R. O. C. (2016) · Biomaterials · doi:10.1016/j.biomaterials.2016.01.024 · Cited by 613
Skin tissue generation by laser cell printing
Koch, L., Deiwick, A., Schlie, S., Michael, S., Gruene, M., Coger, V., Zychlinski, D., Schambach, A., Reimers, K., Vogt, P. M., et al. (2012) · Biotechnology and Bioengineering · doi:10.1002/bit.24455 · Cited by 609
Recent advances in bioprinting techniques: approaches, applications and future prospects
Li, J., Chen, M., Fan, X., & Zhou, H. (2016) · Journal of Translational Medicine · doi:10.1186/s12967-016-1028-0 · Cited by 608
Xu, T., Zhao, W., Zhu, J.-M., Albanna, M. Z., Yoo, J. J., & Atala, A. (2013) · Biomaterials · doi:10.1016/j.biomaterials.2012.09.035 · Cited by 607
Hematopoietic stem-cell gene therapy for cerebral adrenoleukodystrophy
Eichler, F., Duncan, C., Musolino, P. L., Orchard, P. J., De Oliveira, S., Thrasher, A. J., Armant, M., Dansereau, C., Lund, T. C., Miller, W. P., et al. (2017) · New England Journal of Medicine · doi:10.1056/nejmoa1700554 · Cited by 604 · cited 1×
“Most 3D bioprinting processes and stem cell therapies require the use of synthetic and natural biological molecules such as growth factors to enhance the proliferation and differentiation of stem cells [155, 301].”
BackgroundShin’oka, T., Matsumura, G., Hibino, N., Naito, Y., Watanabe, M., Konuma, T., Sakamoto, T., Nagatsu, M., & Kurosawa, H. (2005) · The Journal of Thoracic and Cardiovascular Surgery · doi:10.1016/j.jtcvs.2004.12.047 · Cited by 585
Thermal Inkjet Printing in Tissue Engineering and Regenerative Medicine
Cui, X., Boland, T., D.D'Lima, D., & K. Lotz, M. (2012) · Recent Patents on Drug Delivery & Formulation · doi:10.2174/187221112800672949 · Cited by 581
Readily Available Tissue-Engineered Vascular Grafts
Dahl, S. L. M., Kypson, A. P., Lawson, J. H., Blum, J. L., Strader, J. T., Li, Y., Manson, R. J., Tente, W. E., DiBernardo, L., Hensley, M. T., et al. (2011) · Science Translational Medicine · doi:10.1126/scitranslmed.3001426 · Cited by 563
Emergence of 3D Printed Dosage Forms: Opportunities and Challenges
Alhnan, M. A., Okwuosa, T. C., Sadia, M., Wan, K.-W., Ahmed, W., & Arafat, B. (2016) · Pharmaceutical Research · doi:10.1007/s11095-016-1933-1 · Cited by 554
The promise of organ and tissue preservation to transform medicine
Giwa, S., Lewis, J. K., Alvarez, L., Langer, R., Roth, A. E., Church, G. M., Markmann, J. F., Sachs, D. H., Chandraker, A., Wertheim, J. A., et al. (2017) · Nature Biotechnology · doi:10.1038/nbt.3889 · Cited by 539
Biocompatible Inkjet Printing Technique for Designed Seeding of Individual Living Cells
Nakamura, M., Kobayashi, A., Takagi, F., Watanabe, A., Hiruma, Y., Ohuchi, K., Iwasaki, Y., Horie, M., Morita, I., & Takatani, S. (2005) · Tissue Engineering · doi:10.1089/ten.2005.11.1658 · Cited by 538
Regenerative Effects of Transplanted Mesenchymal Stem Cells in Fracture Healing
Granero-Moltó, F., Weis, J. A., Miga, M. I., Landis, B., Myers, T. J., O'Rear, L., Longobardi, L., Jansen, E. D., Mortlock, D. P., & Spagnoli, A. (2009) · Stem Cells · doi:10.1002/stem.103 · Cited by 530
Lung regeneration: mechanisms, applications and emerging stem cell populations
Kotton, D. N., & Morrisey, E. E. (2014) · Nature Medicine · doi:10.1038/nm.3642 · Cited by 515
Mending broken hearts: cardiac development as a basis for adult heart regeneration and repair
Xin, M., Olson, E. N., & Bassel-Duby, R. (2013) · Nature Reviews Molecular Cell Biology · doi:10.1038/nrm3619 · Cited by 514
Extracellular matrix-based biomaterial scaffolds and the host response
Aamodt, J. M., & Grainger, D. W. (2016) · Biomaterials · doi:10.1016/j.biomaterials.2016.02.003 · Cited by 509
Saris, D. B. F., Vanlauwe, J., Victor, J., Almqvist, K. F., Verdonk, R., Bellemans, J., & Luyten, F. P. (2009) · The American Journal of Sports Medicine · doi:10.1177/0363546509350694 · Cited by 503
Kolambkar, Y. M., Dupont, K. M., Boerckel, J. D., Huebsch, N., Mooney, D. J., Hutmacher, D. W., & Guldberg, R. E. (2011) · Biomaterials · doi:10.1016/j.biomaterials.2010.08.074 · Cited by 500
Laser Printing of Skin Cells and Human Stem Cells
Koch, L., Kuhn, S., Sorg, H., Gruene, M., Schlie, S., Gaebel, R., Polchow, B., Reimers, K., Stoelting, S., Ma, N., et al. (2010) · Tissue Engineering Part C: Methods · doi:10.1089/ten.tec.2009.0397 · Cited by 476
Biomaterials for Integration with 3-D Bioprinting
Skardal, A., & Atala, A. (2015) · Annals of Biomedical Engineering · doi:10.1007/s10439-014-1207-1 · Cited by 474
Bélanger, M., & Marois, Y. (2001) · Journal of Biomedical Materials Research · doi:10.1002/jbm.1043 · Cited by 471
Cox, S. C., Thornby, J. A., Gibbons, G. J., Williams, M. A., & Mallick, K. K. (2015) · Materials Science and Engineering: C · doi:10.1016/j.msec.2014.11.024 · Cited by 452
Current trends in the design of scaffolds for computer-aided tissue engineering
Giannitelli, S. M., Accoto, D., Trombetta, M., & Rainer, A. (2014) · Acta Biomaterialia · doi:10.1016/j.actbio.2013.10.024 · Cited by 451
Direct‐write bioprinting three‐dimensional biohybrid systems for future regenerative therapies
Chang, C. C., Boland, E. D., Williams, S. K., & Hoying, J. B. (2011) · Journal of Biomedical Materials Research Part B: Applied Biomaterials · doi:10.1002/jbm.b.31831 · Cited by 445
OPTN/SRTR 2015 Annual Data Report: Kidney
Hart, A., Smith, J. M., Skeans, M. A., Gustafson, S. K., Stewart, D. E., Cherikh, W. S., Wainright, J. L., Kucheryavaya, A., Woodbury, M., Snyder, J. J., et al. (2017) · American Journal of Transplantation · doi:10.1111/ajt.14124 · Cited by 445
MSCs: Delivery Routes and Engraftment, Cell-Targeting Strategies, and Immune Modulation
Kean, T. J., Lin, P., Caplan, A. I., & Dennis, J. E. (2013) · Stem Cells International · doi:10.1155/2013/732742 · Cited by 433
Bioprinting for vascular and vascularized tissue biofabrication
Datta, P., Ayan, B., & Ozbolat, I. T. (2017) · Acta Biomaterialia · doi:10.1016/j.actbio.2017.01.035 · Cited by 431
Decellularized human liver as a natural 3D-scaffold for liver bioengineering and transplantation
Mazza, G., Rombouts, K., Rennie Hall, A., Urbani, L., Vinh Luong, T., Al-Akkad, W., Longato, L., Brown, D., Maghsoudlou, P., Dhillon, A. P., et al. (2015) · Scientific Reports · doi:10.1038/srep13079 · Cited by 415
Bian, L., Guvendiren, M., Mauck, R. L., & Burdick, J. A. (2013) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1214100110 · Cited by 401
A prevascularized subcutaneous device-less site for islet and cellular transplantation
Pepper, A. R., Gala-Lopez, B., Pawlick, R., Merani, S., Kin, T., & Shapiro, A. M. J. (2015) · Nature Biotechnology · doi:10.1038/nbt.3211 · Cited by 381
Three-Dimensional BioAssembly Tool for Generating Viable Tissue-Engineered Constructs
Smith, C. M., Stone, A. L., Parkhill, R. L., Stewart, R. L., Simpkins, M. W., Kachurin, A. M., Warren, W. L., & Williams, S. K. (2004) · Tissue Engineering · doi:10.1089/1076327042500274 · Cited by 373
Mechanisms of Rejection: Current Perspectives
Wood, K. J., & Goto, R. (2012) · Transplantation · doi:10.1097/tp.0b013e31823cab44 · Cited by 369
Decellularized tissue-engineered blood vessel as an arterial conduit
Quint, C., Kondo, Y., Manson, R. J., Lawson, J. H., Dardik, A., & Niklason, L. E. (2011) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1019506108 · Cited by 368
Cell damage evaluation of thermal inkjet printed Chinese hamster ovary cells
Cui, X., Dean, D., Ruggeri, Z. M., & Boland, T. (2010) · Biotechnology and Bioengineering · doi:10.1002/bit.22762 · Cited by 364
Bioprinting scale-up tissue and organ constructs for transplantation
Ozbolat, I. T. (2015) · Trends in Biotechnology · doi:10.1016/j.tibtech.2015.04.005 · Cited by 350
Toward engineering functional organ modules by additive manufacturing
Marga, F., Jakab, K., Khatiwala, C., Shepherd, B., Dorfman, S., Hubbard, B., Colbert, S., & Gabor, F. (2012) · Biofabrication · doi:10.1088/1758-5082/4/2/022001 · Cited by 348
Computer‐aided tissue engineering: overview, scope and challenges
Sun, W., Darling, A., Starly, B., & Nam, J. (2004) · Biotechnology and Applied Biochemistry · doi:10.1042/ba20030108 · Cited by 341
In vivo engineering of organs: The bone bioreactor
Stevens, M. M., Marini, R. P., Schaefer, D., Aronson, J., Langer, R., & Shastri, V. P. (2005) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.0504705102 · Cited by 339
Survival and Proliferative Ability of Various Living Cell Types after Laser-Induced Forward Transfer
Hopp, B., Smausz, T., Kresz, N., Barna, N., Bor, Z., Kolozsvári, L., Chrisey, D. B., Szabó, A., & Nógrádi, A. (2005) · Tissue Engineering · doi:10.1089/ten.2005.11.1817 · Cited by 333
Design, clinical translation and immunological response of biomaterials in regenerative medicine
Sadtler, K., Singh, A., Wolf, M. T., Wang, X., Pardoll, D. M., & Elisseeff, J. H. (2016) · Nature Reviews Materials · doi:10.1038/natrevmats.2016.40 · Cited by 319
SILVA, E. A., & MOONEY, D. J. (2007) · Journal of Thrombosis and Haemostasis · doi:10.1111/j.1538-7836.2007.02386.x · Cited by 316
Gurunathan, S., & Kim, J.-H. (2016) · International Journal of Nanomedicine · doi:10.2147/ijn.s105264 · Cited by 316
Zhao, Y., Li, Y., Mao, S., Sun, W., & Yao, R. (2015) · Biofabrication · doi:10.1088/1758-5090/7/4/045002 · Cited by 312
Biomatrices and biomaterials for future developments of bioprinting and biofabrication
Nakamura, M., Iwanaga, S., Henmi, C., Arai, K., & Nishiyama, Y. (2010) · Biofabrication · doi:10.1088/1758-5082/2/1/014110 · Cited by 311
Tissue Engineering: Toward a New Era of Medicine
Shafiee, A., & Atala, A. (2017) · Annual Review of Medicine · doi:10.1146/annurev-med-102715-092331 · Cited by 296
When stem cells meet graphene: Opportunities and challenges in regenerative medicine
Kenry, Lee, W. C., Loh, K. P., & Lim, C. T. (2018) · Biomaterials · doi:10.1016/j.biomaterials.2017.10.004 · Cited by 293
Nerve dependence in tissue, organ, and appendage regeneration
Kumar, A., & Brockes, J. P. (2012) · Trends in Neurosciences · doi:10.1016/j.tins.2012.08.003 · Cited by 290
Ferulic Acid: A Hope for Alzheimer’s Disease Therapy from Plants
Sgarbossa, A., Giacomazza, D., & Di Carlo, M. (2015) · Nutrients · doi:10.3390/nu7075246 · Cited by 282
Toh, W. S., Lim, T. C., Kurisawa, M., & Spector, M. (2012) · Biomaterials · doi:10.1016/j.biomaterials.2012.01.065 · Cited by 281
Liao, I., Moutos, F. T., Estes, B. T., Zhao, X., & Guilak, F. (2013) · Advanced Functional Materials · doi:10.1002/adfm.201300483 · Cited by 276
Perfusion decellularization of whole organs
Guyette, J. P., Gilpin, S. E., Charest, J. M., Tapias, L. F., Ren, X., & Ott, H. C. (2014) · Nature Protocols · doi:10.1038/nprot.2014.097 · Cited by 275
Imaging challenges in biomaterials and tissue engineering
Appel, A. A., Anastasio, M. A., Larson, J. C., & Brey, E. M. (2013) · Biomaterials · doi:10.1016/j.biomaterials.2013.05.033 · Cited by 273
Shim, J.-H., Kim, J. Y., Park, M., Park, J., & Cho, D.-W. (2011) · Biofabrication · doi:10.1088/1758-5082/3/3/034102 · Cited by 268
3D bioprinting using stem cells
Ong, C. S., Yesantharao, P., Huang, C. Y., Mattson, G., Boktor, J., Fukunishi, T., Zhang, H., & Hibino, N. (2018) · Pediatric Research · doi:10.1038/pr.2017.252 · Cited by 265
Tissue Engineering and Regenerative Medicine: Recent Innovations and the Transition to Translation
Fisher, M. B., & Mauck, R. L. (2013) · Tissue Engineering Part B: Reviews · doi:10.1089/ten.teb.2012.0723 · Cited by 263
Autologous chondrocyte implantation in the knee: systematic review and economic evaluation
Mistry, H., Connock, M., Pink, J., Shyangdan, D., Clar, C., Royle, P., Court, R., Biant, L. C., Metcalfe, A., & Waugh, N. (2017) · Health Technology Assessment · doi:10.3310/hta21060 · Cited by 255
Biomaterials-based 3D cell printing for next-generation therapeutics and diagnostics
Jang, J., Park, J. Y., Gao, G., & Cho, D.-W. (2018) · Biomaterials · doi:10.1016/j.biomaterials.2017.11.030 · Cited by 254
Stanton, M. M., Samitier, J., & Sánchez, S. (2015) · Lab on a Chip · doi:10.1039/c5lc90069g · Cited by 252
Kim, I. L., Khetan, S., Baker, B. M., Chen, C. S., & Burdick, J. A. (2013) · Biomaterials · doi:10.1016/j.biomaterials.2013.04.004 · Cited by 249
Inkjet printing of macromolecules on hydrogels to steer neural stem cell differentiation
Ilkhanizadeh, S., Teixeira, A. I., & Hermanson, O. (2007) · Biomaterials · doi:10.1016/j.biomaterials.2007.05.018 · Cited by 246
3D bioprinting and its in vivo applications
Hong, N., Yang, G., Lee, J., & Kim, G. (2018) · Journal of Biomedical Materials Research Part B: Applied Biomaterials · doi:10.1002/jbm.b.33826 · Cited by 243
Three-Dimensional Bioprinting for Regenerative Dentistry and Craniofacial Tissue Engineering
Obregon, F., Vaquette, C., Ivanovski, S., Hutmacher, D. W., & Bertassoni, L. E. (2015) · Journal of Dental Research · doi:10.1177/0022034515588885 · Cited by 242
Zhou, Z., Buchanan, F., Mitchell, C., & Dunne, N. (2014) · Materials Science and Engineering: C · doi:10.1016/j.msec.2014.01.027 · Cited by 241
Singh, A., Corvelli, M., Unterman, S. A., Wepasnick, K. A., McDonnell, P., & Elisseeff, J. H. (2014) · Nature Materials · doi:10.1038/nmat4048 · Cited by 238
Development of the human heart
Sylva, M., van den Hoff, M. J. B., & Moorman, A. F. M. (2014) · American Journal of Medical Genetics Part A · doi:10.1002/ajmg.a.35896 · Cited by 234
3D Bioprinting for Vascularized Tissue Fabrication
Richards, D., Jia, J., Yost, M., Markwald, R., & Mei, Y. (2017) · Annals of Biomedical Engineering · doi:10.1007/s10439-016-1653-z · Cited by 234
3-dimensional bioprinting for tissue engineering applications
Gu, B. K., Choi, D. J., Park, S. J., Kim, M. S., Kang, C. M., & Kim, C.-H. (2016) · Biomaterials Research · doi:10.1186/s40824-016-0058-2 · Cited by 232
Chrisey, D. B. (2000) · Science · doi:10.1126/science.289.5481.879 · Cited by 227
Three-dimensional bioprinting in tissue engineering and regenerative medicine
Gao, G., & Cui, X. (2016) · Biotechnology Letters · doi:10.1007/s10529-015-1975-1 · Cited by 227
Zhao, T., Zhang, Z.-N., Westenskow, P. D., Todorova, D., Hu, Z., Lin, T., Rong, Z., Kim, J., He, J., Wang, M., et al. (2015) · Cell Stem Cell · doi:10.1016/j.stem.2015.07.021 · Cited by 226
Towards organ printing: engineering an intra-organ branched vascular tree
Visconti, R. P., Kasyanov, V., Gentile, C., Zhang, J., Markwald, R. R., & Mironov, V. (2010) · Expert Opinion on Biological Therapy · doi:10.1517/14712590903563352 · Cited by 224
Biocompatibility of implantable materials: An oxidative stress viewpoint
Mouthuy, P.-A., Snelling, S. J. B., Dakin, S. G., Milković, L., Gašparović, A. Č., Carr, A. J., & Žarković, N. (2016) · Biomaterials · doi:10.1016/j.biomaterials.2016.09.010 · Cited by 219
Tissue Engineering Applications of Three-Dimensional Bioprinting
Zhang, X., & Zhang, Y. (2015) · Cell Biochemistry and Biophysics · doi:10.1007/s12013-015-0531-x · Cited by 218
Public Attitudes and Behavior Regarding Organ Donation
Manninen, D. L. (1985) · JAMA: The Journal of the American Medical Association · doi:10.1001/jama.1985.03350450083026 · Cited by 217
Harnessing and Modulating Inflammation in Strategies for Bone Regeneration
Mountziaris, P. M., Spicer, P. P., Kasper, F. K., & Mikos, A. G. (2011) · Tissue Engineering Part B: Reviews · doi:10.1089/ten.teb.2011.0182 · Cited by 217
Bioinspired nanofibers support chondrogenesis for articular cartilage repair
Coburn, J. M., Gibson, M., Monagle, S., Patterson, Z., & Elisseeff, J. H. (2012) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1121605109 · Cited by 217
Castilho, M., Moseke, C., Ewald, A., Gbureck, U., Groll, J., Pires, I., Teßmar, J., & Vorndran, E. (2014) · Biofabrication · doi:10.1088/1758-5082/6/1/015006 · Cited by 211
Clar, C., Cummins, E., McIntyre, L., Thomas, S., Lamb, J., Bain, L., Jobanputra, P., & Waugh, N. (2005) · Health Technology Assessment · doi:10.3310/hta9470 · Cited by 210
Atala, A. (2009) · Current Opinion in Biotechnology · doi:10.1016/j.copbio.2009.10.003 · Cited by 202
Development of hydrogels for regenerative engineering
Guan, X., Avci‐Adali, M., Alarçin, E., Cheng, H., Kashaf, S. S., Li, Y., Chawla, A., Jang, H. L., & Khademhosseini, A. (2017) · Biotechnology Journal · doi:10.1002/biot.201600394 · Cited by 199
Strong fiber-reinforced hydrogel
Agrawal, A., Rahbar, N., & Calvert, P. D. (2013) · Acta Biomaterialia · doi:10.1016/j.actbio.2012.10.011 · Cited by 198
Anti-inflammatory peptide-functionalized hydrogels for insulin-secreting cell encapsulation
Su, J., Hu, B.-H., Lowe, W. L., Kaufman, D. B., & Messersmith, P. B. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2009.09.045 · Cited by 197
Malinen, M. M., Kanninen, L. K., Corlu, A., Isoniemi, H. M., Lou, Y.-R., Yliperttula, M. L., & Urtti, A. O. (2014) · Biomaterials · doi:10.1016/j.biomaterials.2014.03.020 · Cited by 192
Engineering tissues, organs and cells
Atala, A. (2007) · Journal of Tissue Engineering and Regenerative Medicine · doi:10.1002/term.18 · Cited by 190
Platelet-derived growth factor applications in periodontal and peri-implant bone regeneration
Kaigler, D., Avila, G., Wisner-Lynch, L., Nevins, M. L., Nevins, M., Rasperini, G., Lynch, S. E., & Giannobile, W. V. (2011) · Expert Opinion on Biological Therapy · doi:10.1517/14712598.2011.554814 · Cited by 190
Synthetic Mimics of the Extracellular Matrix: How Simple is Complex Enough?
Kyburz, K. A., & Anseth, K. S. (2015) · Annals of Biomedical Engineering · doi:10.1007/s10439-015-1297-4 · Cited by 189
Bioprinting of artificial blood vessels: current approaches towards a demanding goal
Hoch, E., Tovar, G. E. M., & Borchers, K. (2014) · European Journal of Cardio-Thoracic Surgery · doi:10.1093/ejcts/ezu242 · Cited by 188
Decellularization and Recellularization Technologies in Tissue Engineering
Fu, R., Wang, Y.-C., Liu, S., Shih, T.-R., Lin, H.-L., Chen, Y.-M., Sung, J.-H., Lu, C.-H., Wei, J.-R., Wang, Z.-W., et al. (2014) · Cell Transplantation · doi:10.3727/096368914x678382 · Cited by 186
In vivo biocompatibility studies. I. The cage implant system and a biodegradable hydrogel
Marchant, R., Hiltner, A., Hamlin, C., Rabinovitch, A., Slobodkin, R., & Anderson, J. M. (1983) · Journal of Biomedical Materials Research · doi:10.1002/jbm.820170209 · Cited by 181
Boon and Bane of Inflammation in Bone Tissue Regeneration and Its Link with Angiogenesis
Schmidt-Bleek, K., Kwee, B. J., Mooney, D. J., & Duda, G. N. (2015) · Tissue Engineering Part B: Reviews · doi:10.1089/ten.teb.2014.0677 · Cited by 181
Tsai, E. C., Dalton, P. D., Shoichet, M. S., & Tator, C. H. (2004) · Journal of Neurotrauma · doi:10.1089/0897715041269687 · Cited by 180
Huang, C.-T., Kumar Shrestha, L., Ariga, K., & Hsu, S.-H. (2017) · Journal of Materials Chemistry B · doi:10.1039/c7tb01594a · Cited by 178
Role of mesenchymal stem cells in regenerative medicine: application to bone and cartilage repair
Granero-Molto, F., Weis, J. A., Longobardi, L., & Spagnoli, A. (2008) · Expert Opinion on Biological Therapy · doi:10.1517/14712598.8.3.255 · Cited by 176
Regenerative medicine strategies
Atala, A. (2012) · Journal of Pediatric Surgery · doi:10.1016/j.jpedsurg.2011.10.013 · Cited by 173
Lam, P., Cheung, F., Tan, H., Wang, N., Yuen, M., & Feng, Y. (2016) · International Journal of Molecular Sciences · doi:10.3390/ijms17040465 · Cited by 168
Koch, L., Gruene, M., Unger, C., & Chichkov, B. (2013) · Current Pharmaceutical Biotechnology · doi:10.2174/1389201011314010012 · Cited by 166
Bird, T. G., Lu, W.-Y., Boulter, L., Gordon-Keylock, S., Ridgway, R. A., Williams, M. J., Taube, J., Thomas, J. A., Wojtacha, D., Gambardella, A., et al. (2013) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1302168110 · Cited by 166
3D‐Printed Biodegradable Polymeric Vascular Grafts
Melchiorri, A. J., Hibino, N., Best, C. A., Yi, T., Lee, Y. U., Kraynak, C. A., Kimerer, L. K., Krieger, A., Kim, P., Breuer, C. K., et al. (2016) · Advanced Healthcare Materials · doi:10.1002/adhm.201500725 · Cited by 165
Vascularization of three-dimensional engineered tissues for regenerative medicine applications
Kim, J. J., Hou, L., & Huang, N. F. (2016) · Acta Biomaterialia · doi:10.1016/j.actbio.2016.06.001 · Cited by 165
Orlando, G., Baptista, P., Birchall, M., De Coppi, P., Farney, A., Guimaraes-Souza, N. K., Opara, E., Rogers, J., Seliktar, D., Shapira-Schweitzer, K., et al. (2011) · Transplant International · doi:10.1111/j.1432-2277.2010.01182.x · Cited by 164
Tang, X.-L., Li, Q., Rokosh, G., Sanganalmath, S. K., Chen, N., Ou, Q., Stowers, H., Hunt, G., & Bolli, R. (2016) · Circulation Research · doi:10.1161/circresaha.115.307647 · Cited by 164
He, M., & Callanan, A. (2013) · Tissue Engineering Part B: Reviews · doi:10.1089/ten.teb.2012.0340 · Cited by 159
Tissue Engineering and Regenerative Medicine: A Year in Review
Harrison, R. H., St‐Pierre, J., & Stevens, M. M. (2014) · Tissue Engineering Part B Reviews · doi:10.1089/ten.teb.2013.0668 · Cited by 158
Xu, M., Wang, X., Yan, Y., Yao, R., & Ge, Y. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.01.111 · Cited by 157
Bioconjugated Hydrogels for Tissue Engineering and Regenerative Medicine
Ahadian, S., Sadeghian, R. B., Salehi, S., Ostrovidov, S., Bae, H., Ramalingam, M., & Khademhosseini, A. (2015) · Bioconjugate Chemistry · doi:10.1021/acs.bioconjchem.5b00360 · Cited by 157
Kizawa, H., Nagao, E., Shimamura, M., Zhang, G., & Torii, H. (2017) · Biochemistry and Biophysics Reports · doi:10.1016/j.bbrep.2017.04.004 · Cited by 156
Ma, L., Feng, X., Cui, B.-L., Law, F.-D., Jiang, X., Yang, L., Xie, Q., & Huang, T. (2005) · PubMed · Cited by 154
Advances in skeletal tissue engineering with hydrogels
Elisseeff, J. H., Puleo, C., Yang, F., & Sharma, B. (2005) · Orthodontics and Craniofacial Research · doi:10.1111/j.1601-6343.2005.00335.x · Cited by 153
A Mathematical Model on the Resolution of Extrusion Bioprinting for the Development of New Bioinks
Suntornnond, R., Tan, E. Y. S., An, J., & Chua, C. (2016) · Materials · doi:10.3390/ma9090756 · Cited by 152
Organ repair and regeneration: An overview
Baddour, J., Sousounis, K., & Tsonis, P. A. (2012) · Birth Defects Research Part C Embryo Today Reviews · doi:10.1002/bdrc.21006 · Cited by 151
Delivery of Growth Factors for Tissue Regeneration and Wound Healing
Koria, P. (2012) · BioDrugs · doi:10.2165/11631850-000000000-00000 · Cited by 147
Biodegradable Elastomers for Tissue Engineering and Cell–Biomaterial Interactions
Bettinger, C. J. (2011) · Macromolecular Bioscience · doi:10.1002/mabi.201000397 · Cited by 146
Rapid prototyping as a tool for manufacturing bioartificial livers
Wang, X., Yan, Y., & Zhang, R. (2007) · Trends in biotechnology · doi:10.1016/j.tibtech.2007.08.010 · Cited by 146
Lalit, P. A., Hei, D. J., Raval, A. N., & Kamp, T. J. (2014) · Circulation Research · doi:10.1161/circresaha.114.300556 · Cited by 145
Biomarkers for kidney transplant rejection
Lo, D. J., Kaplan, B. E., & Kirk, A. D. (2014) · Nature Reviews Nephrology · doi:10.1038/nrneph.2013.281 · Cited by 144
Kraeutler, M. J., Belk, J. W., Purcell, J. M., & McCarty, E. C. (2017) · The American Journal of Sports Medicine · doi:10.1177/0363546517701912 · Cited by 141
Choi, Y. C., Choi, J. S., Kim, B. S., Kim, J. D., Yoon, H. I., & Cho, Y. W. (2012) · Tissue Engineering Part C Methods · doi:10.1089/ten.tec.2012.0009 · Cited by 139
Forostyak, S., Jendelová, P., & Syková, E. (2013) · Biochimie · doi:10.1016/j.biochi.2013.08.004 · Cited by 138
Versatile fabrication of vascularizable scaffolds for large tissue engineering in bioreactor
Tocchio, A., Tamplenizza, M., Martello, F., Gerges, I., Rossi, E., Argentiere, S., Rodighiero, S., Zhao, W., Milani, P., & Lenardi, C. (2015) · Biomaterials · doi:10.1016/j.biomaterials.2014.12.031 · Cited by 137
OPTN/SRTR 2015 Annual Data Report: Heart
Colvin, M. M., Smith, J. M., Skeans, M. A., Edwards, L. B., Uccellini, K., Snyder, J. J., Israni, A. K., & Kasiske, B. L. (2017) · American Journal of Transplantation · doi:10.1111/ajt.14128 · Cited by 136
Primary graft dysfunction after liver transplantation
Chen, X.-B., & Xu, M. (2014) · Hepatobiliary & pancreatic diseases international · doi:10.1016/s1499-3872(14)60023-0 · Cited by 135
A functional biphasic biomaterial homing mesenchymal stem cells for in vivo cartilage regeneration
Huang, H., Zhang, X., Hu, X., Shao, Z., Zhu, J., Dai, L., Man, Z., Yuan, L., Chen, H., Zhou, C., et al. (2014) · Biomaterials · doi:10.1016/j.biomaterials.2014.08.020 · Cited by 135
Kaukonen, R., Jacquemet, G., Hamidi, H., & Ivaska, J. (2017) · Nature Protocols · doi:10.1038/nprot.2017.107 · Cited by 134
Ballyns, J. J., Gleghorn, J. P., Niebrzydowski, V., Rawlinson, J., Potter, H. G., Maher, S. A., Wright, T. M., & Bonassar, L. J. (2008) · Tissue Engineering Part A · doi:10.1089/ten.tea.2007.0186 · Cited by 130
Streamlined, Inexpensive 3D Printing of the Brain and Skull
Naftulin, J. S., Kimchi, E. Y., & Cash, S. S. (2015) · PLoS ONE · doi:10.1371/journal.pone.0136198 · Cited by 129
Functional biomaterials for cartilage regeneration
Ge, Z., Li, C., Heng, B. C., Cao, G., & Yang, Z. (2012) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.34147 · Cited by 126
Biomechanics of cartilage articulation: Effects of lubrication and degeneration on shear deformation
Wong, B. L., Bae, W. C., Chun, J., Gratz, K. R., Lotz, M., & Sah, R. L. (2008) · Arthritis & Rheumatism · doi:10.1002/art.23548 · Cited by 126
Tunable Collagen I Hydrogels for Engineered Physiological Tissue Micro-Environments
Antoine, E. E., Vlachos, P. P., & Rylander, M. N. (2015) · PLOS ONE · doi:10.1371/journal.pone.0122500 · Cited by 125
Recent Trends and Challenges in Complex Organ Manufacturing
Wang, X., Yan, Y., & Zhang, R. (2009) · Tissue Engineering Part B Reviews · doi:10.1089/ten.teb.2009.0576 · Cited by 116
Diagnostic and Therapeutic Implications of Type 2 Myocardial Infarction: Review and Commentary
Alpert, J. S., Thygesen, K. A., White, H. D., & Jaffe, A. S. (2013) · The American Journal of Medicine · doi:10.1016/j.amjmed.2013.09.031 · Cited by 115
From bench to FDA to bedside: US regulatory trends for new stem cell therapies
Knoepfler, P. S. (2014) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2014.12.001 · Cited by 115
Construction of three-dimensional vascularized cardiac tissue with cell sheet engineering
Sakaguchi, K., Shimizu, T., & Okano, T. (2014) · Journal of Controlled Release · doi:10.1016/j.jconrel.2014.12.016 · Cited by 113
Hardwiring Stem Cell Communication through Tissue Structure
Xin, T., Greco, V., & Myung, P. S. (2016) · Cell · doi:10.1016/j.cell.2016.02.041 · Cited by 112
Emerging rules for inducing organ regeneration
Yannas, I. V. (2012) · Biomaterials · doi:10.1016/j.biomaterials.2012.10.006 · Cited by 111
Patterson, J. T., Gilliland, T., Maxfield, M. W., Church, S. N., Naito, Y., Shinoka, T., & Breuer, C. K. (2012) · Regenerative Medicine · doi:10.2217/rme.12.12 · Cited by 110
Extracellular matrix-mediated osteogenic differentiation of murine embryonic stem cells
Evans, N. D., Gentleman, E., Chen, X., Roberts, C. J., Polak, J. M., & Stevens, M. M. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.01.039 · Cited by 109
Natural Products from Chinese Medicines with Potential Benefits to Bone Health
Che, C., Wong, M., & Lam, C. W. K. (2016) · Molecules · doi:10.3390/molecules21030239 · Cited by 107
Kuo, K.-C., Lin, R., Tien, H.-W., Wu, P.-Y., Li, Y., Melero‐Martin, J. M., & Chen, Y. (2015) · Acta Biomaterialia · doi:10.1016/j.actbio.2015.09.002 · Cited by 106
Tissue-Engineered Cartilage: The Crossroads of Biomaterials, Cells and Stimulating Factors
Bhardwaj, N., Devi, D., & Mandal, B. B. (2014) · Macromolecular Bioscience · doi:10.1002/mabi.201400335 · Cited by 104
Nutraceuticals Synergistically Promote Proliferation of Human Stem Cells
Bickford, P. C., Tan, J., Shytle, R. D., Sanberg, C. D., El‐Badri, N., & Sanberg, P. R. (2006) · Stem Cells and Development · doi:10.1089/scd.2006.15.118 · Cited by 103
An FDA perspective on preclinical development of cell-based regenerative medicine products
Bailey, A. M., Mendicino, M., & Au, P. (2014) · Nature Biotechnology · doi:10.1038/nbt.2971 · Cited by 102
Modular Tissue Assembly Strategies for Biofabrication of Engineered Cartilage
Schon, B. S., Hooper, G. J., & Woodfield, T. B. F. (2016) · Annals of Biomedical Engineering · doi:10.1007/s10439-016-1609-3 · Cited by 101
Fine-tuning of substrate architecture and surface chemistry promotes muscle tissue development
Guex, A. G., Kocher, F. M., Fortunato, G., Körner, E., Hegemann, D., Carrel, T. P., Tevaearai, H. T., & Giraud, M. (2012) · Acta Biomaterialia · doi:10.1016/j.actbio.2011.12.033 · Cited by 100
The Role of Mesenchymal Stem Cells in the Regenerative Wound Healing Phenotype
Balaji, S., Keswani, S. G., & Crombleholme, T. M. (2012) · Advances in Wound Care · doi:10.1089/wound.2012.0361 · Cited by 98
Vessel Bioengineering: Development of Small-Diameter Arterial Grafts
Tara, S., Rocco, K. A., Hibino, N., Sugiura, T., Kurobe, H., Breuer, C. K., & Shinoka, T. (2013) · Circulation Journal · doi:10.1253/circj.cj-13-1440 · Cited by 97
The safety of human pluripotent stem cells in clinical treatment
Simonson, O. E., Domogatskaya, A., Volchkov, P., & Rodin, S. (2015) · Annals of Medicine · doi:10.3109/07853890.2015.1051579 · Cited by 97
Fox, L. T., Mazumder, A., Dwivedi, A., Gerber, M., du Plessis, J., & Hamman, J. H. (2017) · Journal of Ethnopharmacology · doi:10.1016/j.jep.2017.02.017 · Cited by 94
Tissue-engineered magnetic cell sheet patches for advanced strategies in tendon regeneration
Gonçalves, A. I., Rodrigues, M. T., & Gomes, M. E. (2017) · Acta Biomaterialia · doi:10.1016/j.actbio.2017.09.014 · Cited by 92
Tissue-Specific Effects of Esophageal Extracellular Matrix
Keane, T. J., DeWard, A. D., Londoño, R., Saldin, L. T., Castleton, A. A., Carey, L. E., Nieponice, A., Lagasse, E., & Badylak, S. F. (2015) · Tissue Engineering Part A · doi:10.1089/ten.tea.2015.0322 · Cited by 91
In Vitro Angiogenesis of 3D Tissue Engineered Adipose Tissue
Yao, R., Zhang, R., Yan, Y., & Wang, X. (2009) · Journal of Bioactive and Compatible Polymers · doi:10.1177/0883911508099367 · Cited by 91
Huang, Y., He, K., & Wang, X. (2013) · Materials Science and Engineering C · doi:10.1016/j.msec.2013.03.048 · Cited by 90
Development of an immunomodulatory biomaterial: Using resolvin D1 to modulate inflammation
Vasconcelos, D. P., Costa, M. M., Amaral, I. F., Barbosa, M. A., Águas, A. P., & Barbosa, J. N. (2015) · Biomaterials · doi:10.1016/j.biomaterials.2015.02.120 · Cited by 90
Human Cartilage Tissue Fabrication Using Three-dimensional Inkjet Printing Technology
Cui, X., Gao, G., Yonezawa, T., & Dai, G. (2014) · Journal of Visualized Experiments · doi:10.3791/51294 · Cited by 87
Tubular filamentation for laser material processing
Xie, C., Jukna, V., Milián, C., Giust, R., Ouadghiri-Idrissi, I., Itina, T., Dudley, J. M., Couairon, A., & Courvoisier, F. (2015) · Scientific Reports · doi:10.1038/srep08914 · Cited by 86
Li, Z., Guo, X., Palmer, A. F., Das, H., & Guan, J. (2012) · Acta Biomaterialia · doi:10.1016/j.actbio.2012.06.024 · Cited by 86
Use and Outcomes of Kidneys from Donation after Circulatory Death Donors in the United States
Gill, J. S., Rose, C., Lesage, J., Joffres, Y., Gill, J., & O’Connor, K. (2017) · Journal of the American Society of Nephrology · doi:10.1681/asn.2017030238 · Cited by 86
Cited by
Molecular Mechanisms and Emerging Therapeutics for Osteoporosis
Noh, J.-Y., Yang, Y., & Jung, H. (2020) · International Journal of Molecular Sciences · doi:10.3390/ijms21207623 · Cited by 287
Maleki, A., Ghomi, M., Nikfarjam, N., Akbari, M., Sharifi, E., Shahbazi, M., Kermanian, M., Seyedhamzeh, M., Nazarzadeh Zare, E., Mehrali, M., et al. (2022) · Advanced Functional Materials · doi:10.1002/adfm.202203430 · Cited by 262
Bone tissue engineering techniques, advances, and scaffolds for treatment of bone defects
Alonzo, M., Alvarez Primo, F., Anil Kumar, S., Mudloff, J. A., Dominguez, E., Fregoso, G., Ortiz, N., Weiss, W. M., & Joddar, B. (2021) · Current Opinion in Biomedical Engineering · doi:10.1016/j.cobme.2020.100248 · Cited by 255
Advancing bioinks for 3D bioprinting using reactive fillers: a review
Heid, S., & Boccaccini, A. R. (2020) · Acta Biomaterialia · doi:10.1016/j.actbio.2020.06.040 · Cited by 224
Recent advances in tissue engineering scaffolds based on polyurethane and modified polyurethane
Naureen, B., Haseeb, A. S. M. A., Basirun, W. J., & Muhamad, F. (2021) · Materials Science and Engineering: C · doi:10.1016/j.msec.2020.111228 · Cited by 200
Metadata
- Authors
- Dzobo, K., Thomford, N. E., Senthebane, D. A., Shipanga, H., Rowe, A., Dandara, C., Pillay, M., & Motaung, K. S. C. M.
- Venue
- Stem Cells International
- Publisher
- Wiley
- Published
- 2018-07-30
- Volume
- 2018
- Pages
- 1-24
- ISSN
- 1687-966X (ISSN-L)
- 1687-9678
- OpenAlex
- W2886202005
- Cited by
- 433
- References
- 303
- FWCI
- 16.33
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.