Influence of Laser Process Parameters, Liquid Medium, and External Field on the Synthesis of Colloidal Metal Nanoparticles Using Pulsed Laser Ablation in Liquid: A Review
Open accessThe DOI matches its Crossref record; 191 of the 197 references it cites were found in a registry or an index, and 1 are not checked yet; 23 of the 138 sources its claims cite were checked for support.
Abstract
Pulsed laser ablation in liquid, used for nanoparticle synthesis from solid bulk metal targets (a top-down approach), has been a hot topic of research in the past few decades. It is a highly efficient and 'green' fabrication method for producing pure, stable, non-toxic (ligand-free), colloidal nanoparticles, which is often challenging using traditional chemical methods. Due to the short time scale interaction between the laser pulses and the target, it is difficult to achieve complete control on the physical characteristics of metallic nanoparticles. Laser process parameters, liquid environment, and external fields vastly effect the shape and structure of nanoparticles for targeted applications. Past reviews on pulsed laser ablation have focused extensively on synthesising different materials using this technique but little attention has been given to explaining the dependency aspect of the process parameters in fine-tuning the nanoparticle characteristics. In this study, we reviewed the state of the art literature available on this technique, which can help the scientific community develop a comprehensive understanding with special insights into the laser ablation mechanism. We further examined the importance of these process parameters in improving the ablation rate and productivity and analysed the morphology, size distribution, and structure of the obtained nanoparticles. Finally, the challenges faced in nanoparticle research and prospects are presented.
Verified 2026-11-20 · 1 reference not checked yet
Overview
CoChat Summary
TL;DR
This review synthesizes how pulsed laser ablation in liquid (PLAL) parameters, liquid medium, and external fields control colloidal metal nanoparticle size, morphology, and productivity. It concludes that PLAL is a green, ligand-free top-down route, but complete predictive control remains difficult because of complex, short-time-scale laser–matter interactions.
Key findings
- PLAL is presented as a fast, environmentally friendly synthesis method producing pure, stable, ligand-free colloidal nanoparticles; laser parameters, liquid environment, and external fields significantly affect ablation and resulting nanoparticle morphology and size distribution.
- Pulse duration matters: for Ag NPs, femtosecond and picosecond pulses produced diameters of 10–15 nm, whereas nanosecond pulses produced 75–85 nm; the review concludes femtosecond/picosecond pulses were better for nanoparticle generation by reducing thermal interactions.
- Parameter-specific effects include Zn NP diameters of 12.1 and 5.6 at PRR values of 10 Hz and 15 Hz; Ag colloid NPs had the smallest mean diameter of 17.54 nm and narrowest distribution of 36.86 nm at 4.2 J/cm²; GaN colloidal NPs were synthesized over 380–1500 J/cm², with mean size and productivity increasing with fluence before fragmentation/agglomeration at higher fluence.
- External fields alter outcomes: magnetic field application increased Ag NP average diameter from 14 nm to 25 nm; electric field application decreased Pt NP size from 20 nm to 9 nm; temperature variation from 0 °C to 60 °C decreased ZnO NP size and increased bandgap energy.
Methods
- Narrative review of state-of-the-art literature on PLAL, covering mechanism, laser process parameters, liquid medium effects, external field-assisted ablation, and bi-metallic nanoparticles.
- Bibliometric analysis was performed using RStudio, and a keyword word cloud was generated (Figure 2).
- No primary experimental sample is reported; the paper synthesizes findings from prior studies and presents summary tables such as Table 2 and Table 3.
Limitations
- The paper states that no accurate model exists to optimize laser parameters for desired nanostructures; multiparametric analysis of laser parameters on nanoparticle formation remains to be explored; and deciding which parameter plays a decisive role remains a challenge.
- The paper states that femtosecond and picosecond pulse studies are limited compared with nanosecond studies, and the dynamics of the ultra-short time scale still elude complete understanding.
- Evident from the text: as a review, it does not present new experimental data, and its conclusions depend on the cited literature rather than independent validation.
Model-written summary. Check it against the paper before relying on it.
Integrity signals
Registry
Cites
Statistics
Figures


![Figure 3 (A) Illustration of pulsed laser ablation in liquid technique showing the parametric influence of laser input parameters, bulk material properties, and sequential events leading to ablation. (B) Stages of pulsed laser ablation in liquid. Adapted with permission from Ref. [74]. Copyright 2016, intechopen.](https://figures.cochat.ai/paper-figures/e51f46376cf2451381715d3cf5767f68/influence-of-laser-process-parameters-liquid-medium-and-external-field-on-the-figure-3.jpg)
![Figure 4 Shadowgraph images of pulsed laser ablation of Ag in liquid showing optical emissions at 0 ns, shockwave generation at 60 and 570 ns, and cavitation bubble motion (i.e., generation, shrinkage, and collapse) at 1.3–300 µs. Adapted with permission from Ref. [81]. Copyright 2007, The Japan Society of Applied Physics.](https://figures.cochat.ai/paper-figures/e0550474439f46259e87dba60ed0d766/influence-of-laser-process-parameters-liquid-medium-and-external-field-on-the-figure-4.jpg)
![Figure 5 Scanning electron microscopy showing the morphology of ZnO nanoparticles at laser wavelengths of 532 nm (top row) and 1064 nm (bottom). Adapted with permission from Ref. [106]. Copyright 2013, Elsevier Ltd.](https://figures.cochat.ai/paper-figures/ea584101d01e49488751023c31065741/influence-of-laser-process-parameters-liquid-medium-and-external-field-on-the-figure-5.jpg)

![Figure 7 Transmission electron microscopy images showing variations in shapes of dried Ag nanoparticles using different pulse durations: (a) 164 fs, (b) 5 ps, (c) 4 ns, (d) 32 ns, (e) 64 ns, and (f) 100 ns. Adapted with permission from Ref. [112]. Copyright 2017, Printed Electronics.](https://figures.cochat.ai/paper-figures/ea1910ec740848bc8ec5537bf93f8580/influence-of-laser-process-parameters-liquid-medium-and-external-field-on-the-figure-7.jpg)
![Figure 8 Transmission electron microscopy images of the zinc nanoparticles produced at a laser wavelength of 532 nm in distilled water (a–d) at 70 °C and (e–h) 90 °C with fluence values of (a,b,e,f) 6.0 J/cm2 and (c,d,g,h) 8.6 J/cm2. Inset images illustrate (b,d,f,h) the size distribution, (a,c,e,g) the selected area diffraction (SAED) patterns, and (a) the high-resolution transmission electron microscopy image. Adapted with permission from Ref. [114]. Copyright 2015, Elsevier B.V.](https://figures.cochat.ai/paper-figures/f0aa1817a0c341858a7e2d6c0c858e4f/influence-of-laser-process-parameters-liquid-medium-and-external-field-on-the-figure-8.jpg)

![Figure 10 (A) Zn nanoparticles prepared using pulsed laser ablation of Zn in deionised water at different pulse frequencies of 5 Hz (light brown), 10 Hz (medium brown), and 15 Hz (dark brown). (B) Scanning electron microscopy images showing the morphology of dried Zn nanoparticles at a pulse repetition rate of 10 Hz. Adapted with permission from Ref. [124]. Copyright 2019, IOPscience.](https://figures.cochat.ai/paper-figures/0590182c52aa497ca4e96836af65638e/influence-of-laser-process-parameters-liquid-medium-and-external-field-on-the-figure-10.jpg)

![Figure 12 Scanning electron microscopy images of Ag films produced in Si wafer after varying the current densities at (A) 2, (B) 10, and (C) 200 µAcm−2. Adapted with permission from Ref. [168]. Copyright 2011, RSC Pub.](https://figures.cochat.ai/paper-figures/756ea18790574c40a4f74554081bb1ce/influence-of-laser-process-parameters-liquid-medium-and-external-field-on-the-figure-12.jpg)

![Figure 14 Transmission electron microscopy images of spherical-shaped Pt nanoparticles in (A) water and (B) methanol under the influence of a magnetic field. Adapted with permission from Ref. [177]. Copyright 2016, Sphinx Knowledge House.](https://figures.cochat.ai/paper-figures/50c646152b1740fb845e64926194db66/influence-of-laser-process-parameters-liquid-medium-and-external-field-on-the-figure-14.jpg)

![Figure 16 Transmission electron microscopy images of Zn nanoparticles at varying water temperatures and fluence ranges. Adapted with permission from Ref. [114]. Copyright 2015, Elsevier B.V.](https://figures.cochat.ai/paper-figures/e66058b91b5849ea8deffabe800de16b/influence-of-laser-process-parameters-liquid-medium-and-external-field-on-the-figure-16.jpg)
![Figure 17 Transmission electron microscopy images corresponding to a histogram of GaN-based colloidal nanoparticles in distilled water for fluence values of (a) 1500 J/cm2, (b) 1100 J/cm, and (c) 380 J/cm2. Adapted with permission from Ref. [187]. Copyright 2019, Elsevier B.V.](https://figures.cochat.ai/paper-figures/3ca3be9295e248088926e3fffa7bb395/influence-of-laser-process-parameters-liquid-medium-and-external-field-on-the-figure-17.jpg)
Verification
Claims the paper makes
17 Valid · 16 Not valid · 110 Not checked · 53 Own results and interpretations
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“Recently [73,74,75,76,77,78,79,80,81,82,83,84,85,86,87,88,89,90,91,92,93,94,95,96], research has taken a further step, which involved the application of external magnetic, electric, and temperature fields to examine the impact of light–matter interaction and to achieve shape control on various types of nanocrystals.”
§ Influence of Laser Process Parameters, Liquid Medium, and External Field on the Synthesis of Colloidal Metal Nanoparticles Using Pulsed Laser Ablation in Liquid: A Review > 4. Laser Parameters Influencing the Ablation and Synthesis of Colloidal NPs
What the sources say
- Partly supportedcites [73] Sadrolhosseini A.R. Mahdi M.A. Alizadeh F. Rashid S.A. Laser Ablation Technique for Synthesis of Metal Nanoparticle in Liquid Laser Technology and its Applications IntechOpen London, UK 2019 10.5772/intechopen.80374 sourceExperimental — accuracy not yet measured
Our copy of Sadrolhosseini et al. (2019) addresses only part of what the citing sentence attributes to it: Section 5 ('The effect of thermal properties in laser ablation of metal plate') discusses temperature being controlled during laser ablation via the heat diffusion length relative to the laser spot size, and Sections 3 and 7 discuss light–matter interaction (laser absorption by the plasma plume and by the generated nanoparticles). There is no passage describing the application of an external magnetic field or an external electric field, and no shape-control result: the setup (Section 4) contains only a lens, pulsed laser, liquid container, stirrer and linear positioner, and the Conclusion (Section 12) states the nanoparticles 'were formed in the spherical shape'. The parts of the claim not supported by this source are therefore the external magnetic and electric fields and the achievement of shape control on various types of nanocrystals. (LLM, conf=0.68)
- Could not verifycites [74] Svetlichnyi V.A. Shabalina A.V. Lapin I.N. Goncharova D.A. Metal Oxide Nanoparticle Preparation by Pulsed Laser Ablation of Metallic Targets in Liquid Applications of Laser Ablation—Thin Film Deposition, Nanomaterial Synthesis and Surface Modification InTech Rijeka, Croatia 2016 10.5772/65430 sourceExperimental — accuracy not yet measured
Our copy of the Svetlichnyi et al. (2016) chapter never mentions applying external magnetic, electric or temperature fields to control nanocrystal shape or to probe light–matter interaction; the control levers it discusses are laser pulse parameters, solvent choice and precursors (Introduction; §2.4 Chemical transformations during PLAL), plus target scanning and a magnetic stirrer merely for agitating the liquid (§2.2 General experimental technique). Its closest statements actually frame shape/structure control as an outstanding goal — "three main aims that have not been achieved yet: effective control of structure and dimensional characteristics of nanoparticles obtained" (1. Introduction) — and treat heating only as a process effect or limitation (§2.1; §3 Characterization, hematite formation on heating/irradiation). Searches for "external magnetic/electric/temperature fields", "shape control / morphology", "electric field", "heating the solvent" returned no passage addressing the claim's point, so this source cannot confirm or contradict it (it is one of ~24 references bundled in the citing sentence). (LLM, conf=0.68)
- Could not verifycites [75] Hahn A. Barcikowski S. Chichkov B.N. Influences on Nanoparticle Production during Pulsed Laser Ablation Pulse 2008 40 50 10.2961/jlmn.2008.02.0003 sourceExperimental — accuracy not yet measured
Our copy of Hahn (2008) is scoped entirely to femtosecond/pulsed laser ablation of metals in gaseous and liquid media: the Introduction (p. 1) states 'the influences of the laser pulse energy and the media (air, water) on the particle size distribution and productivity are investigated', with in-situ dodecanethiol conjugation as the secondary topic. No passage in the sections searched (Introduction, Experimental, 3.1 gaseous media, 3.2 liquid media, Summary/Conclusion, References) describes applying an external magnetic, electric or temperature field, nor any shape control of nanocrystals; the only temperature remark is an internal one — 'higher pulse energies might enhance the temperature gradient in the material... higher cooling rates causes smaller particles [9]' (3.1) — which concerns size, not shape, and is credited to another study. Searches run: 'external magnetic field shape control nanocrystals light-matter interaction', 'electric field temperature gradient applied during laser ablation particle shape', 'magnetic field assisted laser ablation anisotropic nanorods shape control', 'plasma shielding nanosecond laser ablation ambient gas pressure particle shape morphology'. (LLM, conf=0.70)
- Not checked — no full text of the sourcecites [76] Menéndez-Manjón A. Wagener P. Barcikowski S. Transfer-Matrix Method for Efficient Ablation by Pulsed Laser Ablation and Nanoparticle Generation in Liquids J. Phys. Chem. C 2011 115 5108 5114 10.1021/jp109370q source
- Not checked — no full text of the sourcecites [77] Sulaiman S.A. Ismail A.K.A.A. Azman M.N.F.N. Scattering Effects in Laser Attenuation System for Measurement of Droplet Number Density Energy Procedia 2014 50 79 86 10.1016/j.egypro.2014.06.010 source
- Not checked — no full text of the sourcecites [78] Seely J.F. Quantum Theory of Inverse Bremsstrahlung Absorption and Pair Production Laser Interaction and Related Plasma Phenomena Springer Boston, MA, USA 1974 835 847 10.1007/978-1-4684-8416-8_20 source
- Partly supportedcites [79] Sasaki K. Takada N. Liquid-phase laser ablation Pure Appl. Chem. 2010 82 1317 1327 10.1351/PAC-CON-09-10-23 sourceExperimental — accuracy not yet measured
The Control of Liquid-Phase Laser Ablation section (pp. 1324–1325) describes investigating pressure and temperature as physical controls, but reports results for changing water pressure. It does not report applying magnetic or electric fields, or achieving nanocrystal shape control with those fields. (LLM, conf=0.84)
- Not checked — no full text of the sourcecites [80] Chichkov B.N. Momma C. Nolte S. von Alvensleben F. Tünnermann A. Femtosecond, picosecond and nanosecond laser ablation of solids Appl. Phys. A 1996 63 109 115 10.1007/BF01567637 source
- Could not verifycites [81] Tsuji T. Okazaki Y. Tsuboi Y. Tsuji M. Nanosecond time-resolved observations of laser ablation of silver in water Jpn. J. Appl. Phys. 2007 46 1533 10.1143/JJAP.46.1533 sourceExperimental — accuracy not yet measured
The paper’s Abstract and study description report time-resolved observations of laser ablation of silver in water and nanoparticle formation in cavitation bubbles. Searches for external magnetic, electric, or temperature fields and shape control found no passage addressing those claims; laser-induced heating is not an externally applied temperature field. Our copy provides no page numbers for these passages. (LLM, conf=0.75)
- Partly supportedcites [82] Huang H. Lai J. Lu J. Li Z. Pulsed laser ablation of bulk target and particle products in liquid for nanomaterial fabrication AIP Adv. 2019 9 015307 10.1063/1.5082695 sourceExperimental — accuracy not yet measured
The Introduction (page unavailable) says laser-assisted nanocrystal fabrication can be controlled by experimental conditions, including the external environment, and that the paper studies laser interactions. It does not report applying external magnetic, electric, or temperature fields to control nanocrystal shape; its temperature analysis concerns cavitation bubbles, not an applied field. (LLM, conf=0.78)
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Partly supported
Every source the paper cites for this claim was checked and supports it.
In the paper
“Furthermore, it was shown that ultrashort pulses resulted in short and homogeneous structures.”
§ Influence of Laser Process Parameters, Liquid Medium, and External Field on the Synthesis of Colloidal Metal Nanoparticles Using Pulsed Laser Ablation in Liquid: A Review > 4. Laser Parameters Influencing the Ablation and Synthesis of Colloidal NPs > 4.2. Pulse Duration (Pulse Width)
What the sources say
- Supportedcites [108] Zhang K. Ivanov D.S. Ganeev R.A. Boltaev G.S. Krishnendu P.S. Singh S.C. Garcia M.E. Zavestovskaya I.N. Guo C. Pulse Duration and Wavelength Effects of Laser Ablation on the Oxidation, Hydrolysis, and Aging of Aluminum Nanoparticles in Water Nanomaterials 2019 9 767 10.3390/nano9050767 PMC6566421 31109104 source
Section 3.2 reports that nanoparticles obtained with ultrashort pulses were remarkably smaller and more homogeneous. This supports the claim’s description of short, homogeneous structures, with “short” understood as smaller particle size. (LLM, conf=0.91)
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Supported
Every source the paper cites for this claim was checked and supports it.
In the paper
“The ablation of aluminium (Al) targets in distilled water was analysed at different pulse durations (i.e., 5 ns, 200 ps, and 30 fs) by Zhang et al. [108].”
§ Influence of Laser Process Parameters, Liquid Medium, and External Field on the Synthesis of Colloidal Metal Nanoparticles Using Pulsed Laser Ablation in Liquid: A Review > 4. Laser Parameters Influencing the Ablation and Synthesis of Colloidal NPs > 4.2. Pulse Duration (Pulse Width)
What the sources say
- Supportedcites [108] Zhang K. Ivanov D.S. Ganeev R.A. Boltaev G.S. Krishnendu P.S. Singh S.C. Garcia M.E. Zavestovskaya I.N. Guo C. Pulse Duration and Wavelength Effects of Laser Ablation on the Oxidation, Hydrolysis, and Aging of Aluminum Nanoparticles in Water Nanomaterials 2019 9 767 10.3390/nano9050767 PMC6566421 31109104 source
The Introduction states that the paper analyzes ablation of Al targets in distilled water using pulses of 5 ns, 200 ps, and 30 fs. The Experimental section confirms that the Al target was irradiated in distilled water at those pulse durations. (LLM, conf=0.95)
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Supported
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“Moreover, the suspensions resulted in variations in colour (nanosecond pulses showed a white colour, picosecond pulses showed a light grey colour, and femtosecond pulses showed a brown colour) due to surface plasmon effects.”
§ Influence of Laser Process Parameters, Liquid Medium, and External Field on the Synthesis of Colloidal Metal Nanoparticles Using Pulsed Laser Ablation in Liquid: A Review > 4. Laser Parameters Influencing the Ablation and Synthesis of Colloidal NPs > 4.2. Pulse Duration (Pulse Width)
What the sources say
- Partly supportedcites [108] Zhang K. Ivanov D.S. Ganeev R.A. Boltaev G.S. Krishnendu P.S. Singh S.C. Garcia M.E. Zavestovskaya I.N. Guo C. Pulse Duration and Wavelength Effects of Laser Ablation on the Oxidation, Hydrolysis, and Aging of Aluminum Nanoparticles in Water Nanomaterials 2019 9 767 10.3390/nano9050767 PMC6566421 31109104 sourceExperimental — accuracy not yet measured
Section 3.1 reports the stated colours: milky white for nanosecond pulses, light grey for picosecond pulses, and brown for femtosecond pulses. It links the colour differences to absorption extending into the visible range, but does not attribute them to surface plasmon effects. (LLM, conf=0.88)
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Partly supported
Every source the paper cites for this claim was checked and supports it.
In the paper
“The use of a fundamental wavelength (λ = 1030 nm) yields a much higher ablated mass after the same process time than the second harmonic wavelength (λ = 515 nm).”
§ Influence of Laser Process Parameters, Liquid Medium, and External Field on the Synthesis of Colloidal Metal Nanoparticles Using Pulsed Laser Ablation in Liquid: A Review > 4. Laser Parameters Influencing the Ablation and Synthesis of Colloidal NPs > 4.1. Source and Wavelength of Laser
What the sources say
- Supportedcites [102] Schwenke A. Wagener P. Nolte S. Barcikowski S. Influence of processing time on nanoparticle generation during picosecond-pulsed fundamental and second harmonic laser ablation of metals in tetrahydrofuran Appl. Phys. A 2011 104 77 82 10.1007/s00339-011-6398-9 source
The Conclusions state that, for picosecond ablation of Ag, Zn, or Mg in polyurethane-doped tetrahydrofuran, 1030 nm produced much higher ablated mass after the same processing time than 515 nm. The Results and discussion report the same comparison for all three investigated materials. The claim omits those experimental conditions but accurately paraphrases the reported finding. (LLM, conf=0.95)
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Supported
64 more claims · 2 with their cited sources checked
Create a free account to see all 196 claims and to verify the 29 references still open.
- Probably not a substantial claim. 69
- It may state two separate claims as one. 81
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
Each contradiction between two passages listed here was confirmed by an independent check.
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
§ Influence of Laser Process Parameters, Liquid Medium, and External Field on the Synthesis of Colloidal Metal Nanoparticles Using Pulsed Laser Ablation in Liquid: A Review > 4. Laser Parameters Influencing the Ablation and Synthesis of Colloidal NPs > 4.2. Pulse Duration (Pulse Width)
“For picosecond pulses, the electron cooling time is passed but not the lattice heating time”
§ Influence of Laser Process Parameters, Liquid Medium, and External Field on the Synthesis of Colloidal Metal Nanoparticles Using Pulsed Laser Ablation in Liquid: A Review > 4. Laser Parameters Influencing the Ablation and Synthesis of Colloidal NPs > 4.2. Pulse Duration (Pulse Width)
“(τe << τp << τL)”
Citations
Cites
Femtosecond, picosecond and nanosecond laser ablation of solids
Chichkov, B. N., Momma, C., Nolte, S., Alvensleben, F., & Tünnermann, A. (1996) · Applied Physics A Materials Science & Processing · doi:10.1007/bf01567637 · Cited by 3,066
Synthesis, characterization, applications, and challenges of iron oxide nanoparticles
Ali, A., Zafar, H., Zia, M., ul Haq, I., Phull, A. R., Ali, J. S., & Hussain, A. (2016) · Nanotechnology, Science and Applications · doi:10.2147/nsa.s99986 · Cited by 1,591
The Advancing of Zinc Oxide Nanoparticles for Biomedical Applications
Jiang, J., Pi, J., & Cai, J. (2018) · Bioinorganic Chemistry and Applications · doi:10.1155/2018/1062562 · Cited by 1,255
Salem, S. S., & Fouda, A. (2021) · Biological Trace Element Research · doi:10.1007/s12011-020-02138-3 · Cited by 1,222
Recent biomedical applications of gold nanoparticles: A review
Elahi, N., Kamali, M., & Baghersad, M. H. (2018) · Talanta · doi:10.1016/j.talanta.2018.02.088 · Cited by 1,174 · cited 1×
“[145] examined PLA of Fe in water that yielded a polycrystalline structure of FeOx NPs, which exhibit magnetic properties and can have biomedical applications [146,147].”
BackgroundLaser ablation in liquids: Applications in the synthesis of nanocrystals
Yang, G. W. (2007) · Progress in Materials Science · doi:10.1016/j.pmatsci.2006.10.016 · Cited by 1,055 · cited 1×
“PLAL has several advantages over other methods, which include reduced reaction time, the avoidance of multistep synthetic procedures, the absence of reducing agents, laboratory safety, low toxicity, and the ease of extraction because the generated NPs are confined within the liquid zone, making it an environment-frien…”
BackgroundIjaz, I., Gilani, E., Nazir, A., & Bukhari, A. (2020) · Green Chemistry Letters and Reviews · doi:10.1080/17518253.2020.1802517 · Cited by 992 · cited 1×
“The chemical method is a bottom-up technique that involves the use of the wetchemistry approach for producing NPs from chemical reactions, which has been a popular synthesis approach for many years [25].”
MethodAdvances in green synthesis of nanoparticles
Gour, A., & Jain, N. K. (2019) · Artificial Cells, Nanomedicine, and Biotechnology · doi:10.1080/21691401.2019.1577878 · Cited by 967 · cited 1×
“, algae, fungi, and yeast), microbes, and natural sources [26].”
BackgroundFiévet, F., Ammar-Merah, S., Brayner, R., Chau, F., Giraud, M., Mammeri, F., Peron, J., Piquemal, J.-Y., Sicard, L., & Viau, G. (2018) · Chemical Society Reviews · doi:10.1039/c7cs00777a · Cited by 629
Unique Roles of Gold Nanoparticles in Drug Delivery, Targeting and Imaging Applications
Kong, F.-Y., Zhang, J.-W., Li, R.-F., Wang, Z.-X., Wang, W.-J., & Wang, W. (2017) · Molecules · doi:10.3390/molecules22091445 · Cited by 615
Synthesis of colloidal nanoparticles during femtosecond laser ablation of gold in water
Kabashin, A. V., & Meunier, M. (2003) · Journal of Applied Physics · doi:10.1063/1.1626793 · Cited by 568 · cited 1×
“[111] analysed the effects of femtosecond pulses on Au NPs in deionised water.”
BackgroundHu, X., Zhang, Y., Ding, T., Liu, J., & Zhao, H. (2020) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2020.00990 · Cited by 546
Sub-picosecond UV laser ablation of metals
Preuss, S., Demchuk, A., & Stuke, M. (1995) · Applied Physics A Materials Science & Processing · doi:10.1007/bf01538207 · Cited by 468 · cited 1×
“Excimer systems can provide pulses as short as tens of nanoseconds, making them the source of choice in PLA due to the versatility of ultraviolet light, which ablates many materials [99].”
BackgroundLaser Ablation of Metals: A New Method for Preparing SERS Active Colloids
Neddersen, J., Chumanov, G., & Cotton, T. M. (1993) · Applied Spectroscopy · doi:10.1366/0003702934066460 · Cited by 416
Nanoparticle Characterization: State of the Art, Challenges, and Emerging Technologies
Cho, E. J., Holback, H., Liu, K. C., Abouelmagd, S. A., Park, J., & Yeo, Y. (2013) · Molecular Pharmaceutics · doi:10.1021/mp300697h · Cited by 382 · cited 1×
“Owing to their various functions, applications, and unique physiochemical properties, nanoparticles (NPs) have attained significant technological attention in the past [1].”
BackgroundStabilization and Size Control of Gold Nanoparticles during Laser Ablation in Aqueous Cyclodextrins
Sylvestre, J.-P., Kabashin, A. V., Sacher, E., Meunier, M., & Luong, J. H. T. (2004) · Journal of the American Chemical Society · doi:10.1021/ja048678s · Cited by 369
ANTIBACTERIAL ACTION OF ZINC OXIDE NANOPARTICLES AGAINST FOODBORNE PATHOGENS
TAYEL, A. A., EL‐TRAS, W. F., MOUSSA, S., EL‐BAZ, A. F., MAHROUS, H., SALEM, M. F., & BRIMER, L. (2011) · Journal of Food Safety · doi:10.1111/j.1745-4565.2010.00287.x · Cited by 361 · cited 1×
“(2011) [46] TiO2, SiO2 ZnO, MgO Food industry Food packaging and preservation, additive to improve food texture and colour, contaminant detection; flavouring powders”
BackgroundXiao, J., Liu, P., Wang, C. X., & Yang, G. W. (2017) · Progress in Materials Science · doi:10.1016/j.pmatsci.2017.02.004 · Cited by 352 · cited 2×
“[35] reported the progress in external field-assisted laser ablation in liquid, an efficient strategy for nanocrystal synthesis and nanostructure assembly.”
BackgroundMethodNanoparticles Engineering by Pulsed Laser Ablation in Liquids: Concepts and Applications
Fazio, E., Gökce, B., De Giacomo, A., Meneghetti, M., Compagnini, G., Tommasini, M., Waag, F., Lucotti, A., Zanchi, C. G., Ossi, P. M., et al. (2020) · Nanomaterials · doi:10.3390/nano10112317 · Cited by 346 · cited 1×
“[33] focused on laser-synthesised NPs for selected applications (i.”
BackgroundThe dynamics of overlayer formation on catalyst nanoparticles and strong metal-support interaction
Beck, A., Huang, X., Artiglia, L., Zabilskiy, M., Wang, X., Rzepka, P., Palagin, D., Willinger, M.-G., & van Bokhoven, J. A. (2020) · Nature Communications · doi:10.1038/s41467-020-17070-2 · Cited by 317 · cited 1×
“In the viewpoint of application, metal NPs have been extensively used in various industrial applications, such as in nanofilters for wastewater treatment in the petroleum industry [3], heterogeneous catalysts in the chemical industry [4], photodetectors in the automotive and space industries [5,6], quantum dots in the…”
BackgroundSoni, V., Raizada, P., Singh, P., Cuong, H. N., S, R., Saini, A., Saini, R. V., Le, Q. V., Nadda, A. K., Le, T.-T., et al. (2021) · Environmental Research · doi:10.1016/j.envres.2021.111622 · Cited by 311
(2016) · Springer eBooks · doi:10.1007/978-3-319-15338-4 · Cited by 304
Metallic Nanoparticle Inks for 3D Printing of Electronics
Tan, H. W., An, J., Chua, C. K., & Tran, T. (2019) · Advanced Electronic Materials · doi:10.1002/aelm.201800831 · Cited by 286 · cited 1×
“(2019) [55] FeO2, Ag, CdS, GaN, Si, TiO2, Al Electronic industry Used in solar cell development, semiconductor devices, ink for 3D printing in electronics”
BackgroundArya, S., Mahajan, P., Mahajan, S., Khosla, A., Datt, R., Gupta, V., Young, S.-J., & Oruganti, S. K. (2021) · ECS Journal of Solid State Science and Technology · doi:10.1149/2162-8777/abe095 · Cited by 275
Mechanisms and processes of pulsed laser ablation in liquids during nanoparticle production
DellʼAglio, M., Gaudiuso, R., De Pascale, O., & De Giacomo, A. (2015) · Applied Surface Science · doi:10.1016/j.apsusc.2015.01.082 · Cited by 270 · cited 2×
“[72] explained the PLAL process using a timeresolved diagnostic technique and it was shown that during bubble collapse and diffusion, the NPs were released into the surrounding liquid, forming a colloidal solution.”
BackgroundMethodPreparation of silver nanoparticles by laser ablation in polyvinylpyrrolidone solutions
Tsuji, T., Thang, D.-H., Okazaki, Y., Nakanishi, M., Tsuboi, Y., & Tsuji, M. (2008) · Applied Surface Science · doi:10.1016/j.apsusc.2008.02.048 · Cited by 262 · cited 1×
“[141] showed that solvent affects the ablation efficacy and stability of NPs as well.”
BackgroundPulsed Laser in Liquids Made Nanomaterials for Catalysis
Forsythe, R. C., Cox, C. P., Wilsey, M. K., & Müller, A. M. (2021) · Chemical Reviews · doi:10.1021/acs.chemrev.0c01069 · Cited by 259 · cited 1×
“[32] proposed the preparation of nanomaterials using pulsed laser in liquids for catalysis in water oxidation, oxygen reduction, hydrogen evolution, nitrogen reduction, carbon dioxide reduction, and organic oxidation, followed by laser-made nanomaterials for light-driven catalytic processes and heterogeneous catalysis…”
BackgroundShih, C.-Y., Streubel, R., Heberle, J., Letzel, A., Shugaev, M. V., Wu, C., Schmidt, M., Gökce, B., Barcikowski, S., & Zhigilei, L. V. (2018) · Nanoscale · doi:10.1039/c7nr08614h · Cited by 253
Priyadarshini, E., Priyadarshini, S. S., Cousins, B. G., & Pradhan, N. (2021) · Chemosphere · doi:10.1016/j.chemosphere.2021.129976 · Cited by 244
Significance of Nanotechnology in Food Industry
Chellaram, C., Murugaboopathi, G., John, A. A., Sivakumar, R., Ganesan, S., Krithika, S., & Priya, G. (2014) · APCBEE Procedia · doi:10.1016/j.apcbee.2014.03.010 · Cited by 239
Cui, L., Ren, X., Wang, J., & Sun, M. (2020) · Materials Today Nano · doi:10.1016/j.mtnano.2020.100091 · Cited by 236
Pulse evolution in a broad-bandwidth Ti:sapphire laser
Zhou, J., Christov, I. P., Taft, G., Huang, C.-P., Murnane, M. M., & Kapteyn, H. C. (1994) · Optics Letters · doi:10.1364/ol.19.001149 · Cited by 225 · cited 1×
“Ti-Sapphire requires pumping from another laser source with a highly tuneable emission wavelength (λ = 650–1100 nm) and could generate tens of femtoseconds of pulse duration [98].”
BackgroundSize-Dependent Antimicrobial Effects of Novel Palladium Nanoparticles
Adams, C. P., Walker, K. A., Obare, S. O., & Docherty, K. M. (2014) · PLoS ONE · doi:10.1371/journal.pone.0085981 · Cited by 213
Pulsed-laser–induced reactive quenching at liquid-solid interface: Aqueous oxidation of iron
Patil, P. P., Phase, D. M., Kulkarni, S. A., Ghaisas, S. V., Kulkarni, S. K., Kanetkar, S. M., Ogale, S. B., & Bhide, V. G. (1987) · Physical Review Letters · doi:10.1103/physrevlett.58.238 · Cited by 211 · cited 1×
“[29] for synthesising iron oxide NPs and, since then, the synthesis of different metallic NPs using PLAL has been used in various commercial industries, such as food, biomedical, electronics, and optical (Table 1).”
MethodAdvancements in applications of nanotechnology in global food industry
Sahani, S., & Sharma, Y. C. (2021) · Food Chemistry · doi:10.1016/j.foodchem.2020.128318 · Cited by 206
Pyatenko, A., Wang, H., Koshizaki, N., & Tsuji, T. (2013) · Laser & Photonics Reviews · doi:10.1002/lpor.201300013 · Cited by 202 · cited 1×
“[117] and experimentally investigated by Tsuji et al.”
Advanced composites in aerospace engineering
Rana, S., & Fangueiro, R. M. E. S. (2016) · Elsevier eBooks · doi:10.1016/b978-0-08-100037-3.00001-8 · Cited by 190
Menazea, A. A. (2020) · Radiation Physics and Chemistry · doi:10.1016/j.radphyschem.2019.108616 · Cited by 189 · cited 1×
“[129] Ag NPs Laser wavelength (800 nm) Pulse width: 40 fs Power 1 mJ PRR: 1 KHz Ablation time: 15 min Antibacterial efficiency, structural & optical properties Spherical-shaped NPs, uniform size distribution”
BackgroundDe Giacomo, A., Dell'Aglio, M., Santagata, A., Gaudiuso, R., De Pascale, O., Wagener, P., Messina, G. C., Compagnini, G., & Barcikowski, S. (2013) · Phys. Chem. Chem. Phys. · doi:10.1039/c2cp42649h · Cited by 181 · cited 1×
“[90] examined plasma cooling using fast imaging and emission spectroscopy techniques.”
MethodPerspective of Surfactant‐Free Colloidal Nanoparticles in Heterogeneous Catalysis
Reichenberger, S., Marzun, G., Muhler, M., & Barcikowski, S. (2019) · ChemCatChem · doi:10.1002/cctc.201900666 · Cited by 178 · cited 1×
“[68] demonstrated the importance of laser synthesis for producing functionalised and ligand-free catalysts.”
BackgroundApproaches to Single-Nanoparticle Catalysis
Sambur, J. B., & Chen, P. (2014) · Annual Review of Physical Chemistry · doi:10.1146/annurev-physchem-040513-103729 · Cited by 170 · cited 1×
“(2019) [49] ZnO, CuO, Ag2O3, NiO, Bi2O3, MnO2, Al2O3, MgO Medical Used in antimicrobial, antibacterial, antifungal treatment”
Application of magnetic nanoparticles in petroleum industry: A review
Zhou, K., Zhou, X., Liu, J., & Huang, Z. (2020) · Journal of Petroleum Science and Engineering · doi:10.1016/j.petrol.2020.106943 · Cited by 166 · cited 1×
“In the viewpoint of application, metal NPs have been extensively used in various industrial applications, such as in nanofilters for wastewater treatment in the petroleum industry [3], heterogeneous catalysts in the chemical industry [4], photodetectors in the automotive and space industries [5,6], quantum dots in the…”
BackgroundA review of amino-functionalized magnetic nanoparticles for water treatment: Features and prospects
You, J., Wang, L., Zhao, Y., & Bao, W. (2020) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2020.124668 · Cited by 158 · cited 1×
“(2021) [42] ZnO, SiO2, CuO, Al2O3, TiO2 Fe2O3 Oil and gas For enhanced oil recovery (EOR), drilling fluids, wastewater treatment”
BackgroundAmendola, V., & Meneghetti, M. (2007) · Journal of Materials Chemistry · doi:10.1039/b709621f · Cited by 150 · cited 1×
“Amendola and Meneghetti [116] examined Au NPs in an aqueous solution with laser fluence values varying from 12 to 442 mJ/cm2.”
BackgroundWagener, P., Jakobi, J., Rehbock, C., Chakravadhanula, V. S. K., Thede, C., Wiedwald, U., Bartsch, M., Kienle, L., & Barcikowski, S. (2016) · Scientific Reports · doi:10.1038/srep23352 · Cited by 150 · cited 1×
“[188] synthesised FeAu alloy NPs by PLA of alloy metal targets in different types of solvents.”
BackgroundLaser ablation in liquids for nanomaterial synthesis: diversities of targets and liquids
Zhang, D., Li, Z., & Sugioka, K. (2021) · Journal of Physics: Photonics · doi:10.1088/2515-7647/ac0bfd · Cited by 144
Shih, C.-Y., Shugaev, M. V., Wu, C., & Zhigilei, L. V. (2020) · Physical Chemistry Chemical Physics · doi:10.1039/d0cp00608d · Cited by 136
Odularu, A. T. (2018) · Bioinorganic Chemistry and Applications · doi:10.1155/2018/9354708 · Cited by 135
Antibacterial Activity of Nanomaterials
Diez-Pascual, A. M. (2018) · Nanomaterials · doi:10.3390/nano8060359 · Cited by 134
Tsuji, T., Hamagami, T., Kawamura, T., Yamaki, J., & Tsuji, M. (2005) · Applied Surface Science · doi:10.1016/j.apsusc.2004.09.065 · Cited by 133
Gondal, M. A., Fasasi, T. A., Baig, U., & Mekki, A. (2018) · Journal of Nanoscience and Nanotechnology · doi:10.1166/jnn.2018.15244 · Cited by 126 · cited 1×
“[140] assessed this effect on ZrO2 NPs and observed that the crystallite size changes due to the oxidising medium.”
BackgroundNeumeister, A., Jakobi, J., Rehbock, C., Moysig, J., & Barcikowski, S. (2014) · Phys. Chem. Chem. Phys. · doi:10.1039/c4cp03316g · Cited by 125 · cited 1×
“[189] analysed nine combinations (molar fraction) of Au-Ag alloy compositions using PLA of bulk alloy targets in liquid, leading to”
MethodBiological Nanofactories: Using Living Forms for Metal Nanoparticle Synthesis
Srivastava, S., Usmani, Z., Atanasov, A. G., Singh, V. K., Singh, N. P., Abdel-Azeem, A. M., Prasad, R., Gupta, G., Sharma, M., & Bhargava, A. (2021) · Mini-Reviews in Medicinal Chemistry · doi:10.2174/1389557520999201116163012 · Cited by 122
Colloidal Metal Nanoparticles Prepared by Laser Ablation and their Applications
Zhang, J., Claverie, J., Chaker, M., & Ma, D. (2017) · ChemPhysChem · doi:10.1002/cphc.201601220 · Cited by 120 · cited 1×
“[36] proposed the preparation of colloidal metal NPs through laser ablation and their applications in catalysis, biology, sensing, and clean energy generation and storage.”
BackgroundNanosecond Time-Resolved Observations of Laser Ablation of Silver in Water
Tsuji, T., Okazaki, Y., Tsuboi, Y., & Tsuji, M. (2007) · Japanese Journal of Applied Physics · doi:10.1143/jjap.46.1533 · Cited by 120 · cited 1×
“Studies [81] have focused on the dynamics of cavitation bubble formation, shrinkage and diffusion; some aspects of this thermodynamic process remain to be fully understood, such as the boundary layer interactions between the profile of the metal target and the liquid, surface tension, and pressure drop.”
BackgroundUltrafast Laser Ablation in Liquids for Nanomaterials and Applications
Rao, S. V., Podagatlapalli, G. K., & Hamad, S. (2014) · Journal of Nanoscience and Nanotechnology · doi:10.1166/jnn.2014.9138 · Cited by 115 · cited 1×
“Because of their larger surface area to volume ratio, NPs are highly reactive and provide an excellent depiction of catalytic, optical, physicochemical and magnetic properties relative to bulk materials [2].”
BackgroundNucleation and growth kinetics of nanocrystals formed upon pulsed-laser ablation in liquid
Wang, C. X., Liu, P., Cui, H., & Yang, G. W. (2005) · Applied Physics Letters · doi:10.1063/1.2132069 · Cited by 113 · cited 1×
“[91] proposed a theoretical kinetic approach and validated with experimental work that the isothermal nucleation time ranges between 10−10 second and 1 nanosecond.”
BackgroundSynthesis and characterization of black TiO2 nanoparticles by pulsed laser irradiation in liquid
Zuñiga-Ibarra, V. A., Shaji, S., Krishnan, B., Johny, J., Sharma Kanakkillam, S., Avellaneda, D. A., Martinez, J. A. A., Roy, T. K. D., & Ramos-Delgado, N. A. (2019) · Applied Surface Science · doi:10.1016/j.apsusc.2019.03.302 · Cited by 111 · cited 1×
“[133] TiO2 Laser wavelength: 532 nm Pulse width: 10 ns Fluence: 0.”
Sasaki, K., & Takada, N. (2010) · Pure and Applied Chemistry · doi:10.1351/pac-con-09-10-23 · Cited by 111 · cited 1×
“When laser-induced photonic energy strikes the metal surface, inverse bremsstrahlung (IB) [78] occurs, where radiation absorption results in the vibration of the electrons, which are ejected because of the formation of superheated plasma at temperatures of 4000–6000 K [79] and explosive solid–vapor phase transition.”
BackgroundSynthesis of cadmium oxide nanoparticles by pulsed laser ablation in liquid environment
Mostafa, A. M., Yousef, S. A., Eisa, W. H., Ewaida, M. A., & Al-Ashkar, E. A. (2017) · Optik · doi:10.1016/j.ijleo.2017.06.065 · Cited by 109 · cited 1×
“[130] CdO NPs Pulse duration: 7 ns Energy per pulse: 80 mJ Stability, morphology Crystalline and spherical NPs of size 47 nm”
Solati, E., Dejam, L., & Dorranian, D. (2014) · Optics & Laser Technology · doi:10.1016/j.optlastec.2013.10.031 · Cited by 108 · cited 1×
“[106] investigated the effects of wavelength and pulse energy on the morphology of ZnO NPs in deionised water.”
Background(2019) · doi:10.1177/0967391119847353 · Cited by 105
Self-citationIron Oxide Nanoparticles in Bioimaging – An Immune Perspective
Geppert, M., & Himly, M. (2021) · Frontiers in Immunology · doi:10.3389/fimmu.2021.688927 · Cited by 104
Influences on Nanoparticle Production during Pulsed Laser Ablation
Hahn, A. (2008) · Journal of Laser Micro/Nanoengineering · doi:10.2961/jlmn.2008.02.0003 · Cited by 104 · cited 2×
“Owing to the low productivity of this process, attributed to the higher threshold limit of ablation in liquids compared to gaseous media, the adequate use of the aforementioned process parameters is a critical aspect of this field of research [75].”
BackgroundPulsed laser ablation in liquids: Impact of the bubble dynamics on particle formation
Reich, S., Schönfeld, P., Wagener, P., Letzel, A., Ibrahimkutty, S., Gökce, B., Barcikowski, S., Menzel, A., dos Santos Rolo, T., & Plech, A. (2017) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2016.08.030 · Cited by 103 · cited 1×
“[84] used visible light stroboscopic imaging and X-ray radiography to investigate the bubble dynamics and found that the solid–liquid interface was a crucial factor in bubble motion and contributed to the particle isolation and withdrawal force to create a secondary collage of NPs.”
MethodAmendola, V., Meneghetti, M., Granozzi, G., Agnoli, S., Polizzi, S., Riello, P., Boscaini, A., Anselmi, C., Fracasso, G., Colombatti, M., et al. (2011) · Journal of Materials Chemistry · doi:10.1039/c0jm03863f · Cited by 99 · cited 1×
“[145] examined PLA of Fe in water that yielded a polycrystalline structure of FeOx NPs, which exhibit magnetic properties and can have biomedical applications [146,147].”
BackgroundMenéndez-Manjón, A., Wagener, P., & Barcikowski, S. (2011) · The Journal of Physical Chemistry C · doi:10.1021/jp109370q · Cited by 97 · cited 1×
“Hence, to achieve a desirable focus on the target, the optimum focal length should be calculated as given by [76].”
BackgroundTsuji, T., Yahata, T., Yasutomo, M., Igawa, K., Tsuji, M., Ishikawa, Y., & Koshizaki, N. (2013) · Physical Chemistry Chemical Physics · doi:10.1039/c2cp44159d · Cited by 90
Spectral profile of atomic emission lines and effects of pulse duration on laser ablation in liquid
Sakka, T., Masai, S., Fukami, K., & Ogata, Y. H. (2009) · Spectrochimica Acta Part B: Atomic Spectroscopy · doi:10.1016/j.sab.2009.07.018 · Cited by 88 · cited 1×
“[109] observed an increase in pulse duration, which decreased the ablation rate, using ns-PLA of Cu in water.”
MethodGavrilenko, E. A., Goncharova, D. A., Lapin, I. N., Nemoykina, A. L., Svetlichnyi, V. A., Aljulaih, A. A., Mintcheva, N., & Kulinich, S. A. (2019) · Materials · doi:10.3390/ma12010186 · Cited by 88 · cited 1×
“[145] examined PLA of Fe in water that yielded a polycrystalline structure of FeOx NPs, which exhibit magnetic properties and can have biomedical applications [146,147].”
BackgroundRiahi, A., Khamlich, S., Balghouthi, M., Khamliche, T., Doyle, T. B., Dimassi, W., Guizani, A., & Mâaza, M. (2020) · Journal of Molecular Liquids · doi:10.1016/j.molliq.2020.112694 · Cited by 88 · cited 1×
“[137] Al NPs Laser wavelength: 1064 nm Ablation time: 15 min PRR: 10 Hz Pulse width: 6–7 ns Thermal conductivity, optical properties Increased thermal conductivity of nanofluid.”
BackgroundMOF-derived Co2+-doped TiO2 nanoparticles as photoanodes for dye-sensitized solar cells
Krishnapriya, R., Cherupurakal, N., Saini, B., et al. (2021) · Scientific Reports · doi:10.1038/s41598-021-95844-4 · Cited by 87 · cited 1×
“In the viewpoint of application, metal NPs have been extensively used in various industrial applications, such as in nanofilters for wastewater treatment in the petroleum industry [3], heterogeneous catalysts in the chemical industry [4], photodetectors in the automotive and space industries [5,6], quantum dots in the…”
BackgroundSelf-citationLi, S., Wang, R., & Ho, S. (2021) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2021.126625 · Cited by 83
Schwenke, A., Wagener, P., Nolte, S., & Barcikowski, S. (2011) · Applied Physics A · doi:10.1007/s00339-011-6398-9 · Cited by 83
Moura, C. G., Pereira, R. S. F., Andritschky, M., Lopes, A. L. B., Grilo, J. P. D. F., Nascimento, R. M. D., & Silva, F. S. (2017) · Optics & Laser Technology · doi:10.1016/j.optlastec.2017.06.007 · Cited by 81 · cited 1×
“[155] DDW, acetone and ethanol Study characteristics of Ag NPs Spherical NPs Liquid media play a major role in the mean size and size distribution.”
BackgroundCadmium Selenide Quantum Dots for Solar Cell Applications: A Review
Rahman, M. M., Karim, M. R., Alharbi, H. F., Aldokhayel, B., Uzzaman, T., & Zahir, M. H. (2021) · Chemistry - An Asian Journal · doi:10.1002/asia.202001369 · Cited by 79 · cited 1×
“In the viewpoint of application, metal NPs have been extensively used in various industrial applications, such as in nanofilters for wastewater treatment in the petroleum industry [3], heterogeneous catalysts in the chemical industry [4], photodetectors in the automotive and space industries [5,6], quantum dots in the…”
BackgroundMenéndez-Manjón, A., Chichkov, B. N., & Barcikowski, S. (2010) · The Journal of Physical Chemistry C · doi:10.1021/jp909897v · Cited by 79 · cited 1×
“[181] examined the effects of water temperature on the hydrodynamic diameter and physical properties of gold NPs.”
BackgroundLee, S. H., Jung, H. J., Lee, S. J., Theerthagiri, J., Kim, T. H., & Choi, M. Y. (2020) · Applied Surface Science · doi:10.1016/j.apsusc.2019.145006 · Cited by 79 · cited 1×
“[158] DIW, methanol, hexane, acetonitrile Study chemical reactivity of Au, Au-GC NPs in various solvents Spherical, agglomerated chains and polycrystalline nanostructure The enhanced catalytic activity of Au NPs”
BackgroundComparison of nanosecond laser ablation at 1064 and 308 nm wavelength
Torrisi, L., Gammino, S., Andò, L., Nassisi, V, Doria, D., & Pedone, A. (2003) · Applied Surface Science · doi:10.1016/s0169-4332(02)01467-8 · Cited by 79
Goncharova, D. A., Kharlamova, T., Николаевич, Л. И., & Светличный, В. А. (2019) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.9b03958 · Cited by 78 · cited 1×
“[136] Cu NPs Laser wavelength: 1064 nm Pulse width: 7 ns PRR: 20 Hz Structure, morphology, stability, composition Cubic-shaped NPs formed initially, 10–50-nm size range, nanoribbons formed after 2 weeks”
BackgroundAltowyan, A. S., Mostafa, A. M., & Ahmed, H. A. (2021) · Optik · doi:10.1016/j.ijleo.2021.167217 · Cited by 77 · cited 1×
“[131] Au-Ag NPs Pulse duration: 7 ns Energy per pulse: 50, 150, 250 mJ Effect of laser energy on nanostructure (Au)Core-(Ag)shell nanostructure formation.”
BackgroundPulsed laser ablation and incubation of nickel, iron and tungsten in liquids and air
Lasemi, N., Pacher, U., Zhigilei, L. V., Miguel, Ó., Lahoz, R., & Kautek, W. (2017) · Applied Surface Science · doi:10.1016/j.apsusc.2017.10.082 · Cited by 76 · cited 1×
“[156] Distilled water, ethanol, butanol, iso-propanol Study the development of Ni, Fe and W NPs Not reported Ni showed more incubation than other metals.”
BackgroundThe Effect of Laser Pulse Widths on Laser—Ag Nanoparticle Interaction: Femto- to Nanosecond Lasers
Jeon, J.-W., Yoon, S., Choi, H., Kim, J., Farson, D., & Cho, S.-H. (2018) · Applied Sciences · doi:10.3390/app8010112 · Cited by 76
Mortazavi, S. Z., Parvin, P., Reyhani, A., Golikand, A. N., & Mirershadi, S. (2011) · The Journal of Physical Chemistry C · doi:10.1021/jp1091224 · Cited by 75
Lee, S. J., Theerthagiri, J., & Choi, M. Y. (2022) · Chemical Engineering Journal · doi:10.1016/j.cej.2021.130970 · Cited by 75 · cited 1×
“[153] Methanol, DIW, hexane, acetonitrile Cavitation bubble dynamics of Ni NPs FCC/HCP, Pure FCC and spherical-shaped NPs Bubble lifetime and crystal structure depends on liquid media”
BackgroundLaser Ablation Technique for Synthesis of Metal Nanoparticle in Liquid
Reza Sadrolhosseini, A., Adzir Mahdi, M., Alizadeh, F., & Abdul Rashid, S. (2019) · Laser Technology and its Applications · doi:10.5772/intechopen.80374 · Cited by 74 · cited 1×
“The PLAL process starts by directing a high-energy optical source (pulsed laser radiation) in the perpendicular direction [72,73] towards the solid bulk metal target submerged in liquid.”
BackgroundWaag, F., Streubel, R., Gökce, B., & Barcikowski, S. (2021) · Applied Nanoscience · doi:10.1007/s13204-021-01693-y · Cited by 67 · cited 1×
“[123] conducted a comparative study on beam guidance methods (using galvanometric mirrors and polygon wheels) in picosecond pulsed laser synthesis of Au and Pt colloidal NPs and their alloys.”
BackgroundPulsed laser ablation of bulk target and particle products in liquid for nanomaterial fabrication
Huang, H., Lai, J., Lu, J., & Li, Z. (2019) · AIP Advances · doi:10.1063/1.5082695 · Cited by 67 · cited 1×
“[82] examined the bubble dynamics in terms of three oscillations and found that the velocity and pressure variations inside the bubble led to their expansion and shrinkage.”
BackgroundSynthesis of Magnetic Nanoparticles by Ultrashort Pulsed Laser Ablation of Iron in Different Liquids
Kanitz, A., Hoppius, J. S., del Mar Sanz, M., Maicas, M., Ostendorf, A., & Gurevich, E. L. (2017) · ChemPhysChem · doi:10.1002/cphc.201601252 · Cited by 67 · cited 1×
“[139] examined the structure and morphology of magnetic NPs using five solvents with femtosecond laser pulses and concluded that the molecular structure of the liquid medium dictates the nanostructural formation.”
Liu, P., Wang, C. X., Chen, X. Y., & Yang, G. W. (2008) · The Journal of Physical Chemistry C · doi:10.1021/jp802529r · Cited by 65 · cited 1×
“[163] synthesised GeO2 NPs prepared under the influence of an electric field.”
Gu, T., Chen, T., Cheng, L., Li, X., Han, G., & Liu, Z. (2020) · Nano Research · doi:10.1007/s12274-020-2838-1 · Cited by 65
He, C., Sasaki, T., Usui, H., Shimizu, Y., & Koshizaki, N. (2007) · Journal of Photochemistry and Photobiology A: Chemistry · doi:10.1016/j.jphotochem.2007.04.006 · Cited by 65 · cited 1×
“[148] observed the behaviour of ZnO NPs using PLA of Zn in surfactant-free aqueous solutions.”
BackgroundYan, K., Xu, F., Wei, W., Yang, C., Wang, D., & Shi, X. (2021) · Colloids and Surfaces B Biointerfaces · doi:10.1016/j.colsurfb.2021.111711 · Cited by 64
Tilaki, R. M., zad, A. I., & Mahdavi, S. M. (2006) · Journal of Nanoparticle Research · doi:10.1007/s11051-006-9143-0 · Cited by 64
Al-Nassar, S. I., Hussein, F. I., & Mahmoud, A. K. (2019) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2019.07.012 · Cited by 64 · cited 1×
“[138] Zn NPs Laser wavelength: 800 nm Ablation time: 10 min PRR: 1 KHz Pulse width: 130 fs Effect of pulse energy (0.”
BackgroundAmmar, H. A. M., Aty, A. A. A. E., & Awdan, S. A. E. (2021) · Bioprocess and Biosystems Engineering · doi:10.1007/s00449-020-02494-3 · Cited by 63
Continuous trench, pulsed laser ablation for micro-machining applications
(2016) · doi:10.1016/j.ijmachtools.2016.04.011 · Cited by 57 · cited 1×
“PLA is a product-output-oriented process that can be used for generating NPs and in micro-machining applications [69].”
MethodFabrication of magnesium metallic nanoparticles by liquid-assisted laser ablation
ElFaham, M. M., Okil, M., & Mostafa, A. M. (2020) · Journal of the Optical Society of America B · doi:10.1364/josab.398543 · Cited by 55 · cited 1×
“[128] Mg NPs Laser wavelength (1064 nm) Pulse duration: 7 ns PRR: 10 Hz Ablation time: 10–30 min Spectral line intensities, plasma parameters An increase in ablation time leads to a blue shift in absorption, particle size reduction (20–30 nm)”
BackgroundKim, J., Amaranatha Reddy, D., Ma, R., & Kim, T. K. (2014) · Solid State Sciences · doi:10.1016/j.solidstatesciences.2014.09.005 · Cited by 55
Effect of liquid medium on size and shape of nanoparticles prepared by pulsed laser ablation of tin
Bajaj, G., & Soni, R. K. (2009) · Applied Physics A · doi:10.1007/s00339-009-5248-5 · Cited by 55 · cited 1×
“[149] investigated the effects of various liquid environments (i.”
BackgroundSurfactant Effects on Microemulsion-Based Nanoparticle Synthesis
Tojo, C., de Dios, M., & Barroso, F. (2010) · Materials · doi:10.3390/ma4010055 · Cited by 53
Dittrich, S., Streubel, R., McDonnell, C., Huber, H. P., Barcikowski, S., & Gökce, B. (2019) · Applied Physics A · doi:10.1007/s00339-019-2704-8 · Cited by 53 · cited 2×
“An empirical relationship between the ablation rate and target surface condition is given by the overlapping factor [70].”
BackgroundReady, J. F. (1997) · Industrial Applications of Lasers · doi:10.1016/b978-012583961-7/50023-5 · Cited by 53
Jaleh, B., Nasrollahzadeh, M., Mohazzab, B. F., Eslamipanah, M., Sajjadi, M., & Ghafuri, H. (2020) · Ceramics International · doi:10.1016/j.ceramint.2020.12.197 · Cited by 53 · cited 1×
“[37] reported on the recent investigations into laser-mediated synthesis of nanocomposites for environmental remediation.”
BackgroundLaser ablation dynamics in liquid phase: The effects of magnetic field and electrolyte
Kim, K. K., Roy, M., Kwon, H., Song, J. K., & Park, S. M. (2015) · Journal of Applied Physics · doi:10.1063/1.4913253 · Cited by 52 · cited 1×
“[172] observed in their study on Ag NPs that the plasma emission increases with the magnetic field.”
BackgroundGuillén, G. G., Palma, M. I. M., Krishnan, B., Avellaneda, D., Castillo, G. A., Roy, T. K. D., & Shaji, S. (2015) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2015.06.030 · Cited by 52 · cited 2×
“[114] at different fluence ranges and water temperatures.”
BackgroundAlluhaybi, H. A., Ghoshal, S. K., Shamsuri, W. N. W., Alsobhi, B. O., Al-Shammari, A. A. S., & Krishnan, G. (2019) · Nano-Structures & Nano-Objects · doi:10.1016/j.nanoso.2019.100355 · Cited by 51 · cited 1×
“[132] Au NPs Laser wavelength: 1064 nm Pulse width: 8 ns Fluence: 7.”
BackgroundAl-Douri, Y., Abdulateef, S. A., Odeh, A. A., Voon, C. H., & Badi, N. (2017) · Powder Technology · doi:10.1016/j.powtec.2017.07.059 · Cited by 48 · cited 1×
“[187] conducted a study by ablating GaN plates immersed in distilled water with nanosecond pulses and synthesised GaN colloidal NPs with variance in the fluence range from 380 to 1500 J/cm2.”
BackgroundSelf-citationGreen mitigation of microbial corrosion by copper nanoparticles doped carbon quantum dots nanohybrid
Kalajahi, S. T., Rasekh, B., Yazdian, F., et al. (2020) · Environmental Science and Pollution Research · doi:10.1007/s11356-020-10043-4 · Cited by 46 · cited 1×
“(2020) [59] Fe2O3, ZnO, Medical devices Imaging & bio-analysis, metal nanoparticles doped carbon quantum dots (CQDs)”
BackgroundIsmail, R. A., & Fadhil, F. A. (2014) · Journal of Materials Science: Materials in Electronics · doi:10.1007/s10854-014-1747-z · Cited by 45 · cited 1×
“[162] analysed the effects of an electric field on the properties of Bi2O3 NPs immersed in water.”
BackgroundLetzel, A., Santoro, M., Frohleiks, J., Ziefuß, A. R., Reich, S., Plech, A., Fazio, E., Neri, F., Barcikowski, S., & Gökce, B. (2019) · Applied Surface Science · doi:10.1016/j.apsusc.2018.12.025 · Cited by 44
Nguyen, T. T. P., Tanabe-Yamagishi, R., & Ito, Y. (2019) · Applied Surface Science · doi:10.1016/j.apsusc.2018.10.160 · Cited by 44 · cited 1×
“[85] investigated this point in their study and concluded that if the liquid layer equates with the plasma size, a portion of the plasma forms in the air.”
BackgroundBaig, U., Khan, A., Gondal, M. A., Dastageer, M. A., & Falath, W. S. (2020) · Nanomaterials · doi:10.3390/nano10061098 · Cited by 43 · cited 1×
“In this process, bulk metal alloy targets or one metal is ablated into colloidal NPs of other metals to create a hybrid combination of nanocomposites [183,184] for new applications, such as bioimaging and solar cell materials [185].”
Background(2008) · doi:10.1179/174328908x314370 · Cited by 43
Self-citationHybrid TiO2-ZnO Nanomaterials Prepared Using Laser Ablation in Liquid
Mintcheva, N., Yamaguchi, S., & Kulinich, S. A. (2020) · Materials · doi:10.3390/ma13030719 · Cited by 43
Green synthesis of copper oxide nanoparticles by pulsed laser ablation in spinach leaves extract
Altuwirqi, R. M., Albakri, A. S., Al-Jawhari, H., & Ganash, E. A. (2020) · Optik · doi:10.1016/j.ijleo.2020.165280 · Cited by 43 · cited 1×
“[63] used the PLAL technique to fabricate copper (Cu) and copper oxide (CuxO) NPs with a size range of 1–12 nm using spinach leaf extracts as the ablation medium to increase the oxidation and productivity of NPs.”
MethodEffect of liquid environment on the titanium surface modification by laser ablation
Ali, N., Bashir, S., Umm-i-Kalsoom, Begum, N., Rafique, M., & Husinsky, W. (2017) · Applied Surface Science · doi:10.1016/j.apsusc.2017.02.047 · Cited by 42 · cited 1×
“[157] DIW, propanol Study the characteristics, mechanical and structural surface changes in Ti NPs Nanocones, -globules in DIW Dendritic, globular in propanol Ablation mass and nanostructure formation and bubble confinement are dictated by the liquid medium”
On the growth mechanism of nanoparticles in plasma during pulsed laser ablation in liquids
Taccogna, F., Dell’Aglio, M., Rutigliano, M., Valenza, G., & De Giacomo, A. (2017) · Plasma Sources Science and Technology · doi:10.1088/1361-6595/aa595b · Cited by 41
Kupracz, P., Coy, E. L., Grochowska, K., Karczewski, J. L., Rysz, J., & Siuzdak, K. (2020) · Applied Surface Science · doi:10.1016/j.apsusc.2020.147097 · Cited by 41 · cited 1×
“[135] Fe based NPs Laser wavelength: 1064 nm Pulse width:6 ns PRR: 10 Hz Fluence: 9–21 J/cm2 Irradiation time: 2–32 min Stability, composition An increase in fluence incrementally changes the NP diameter.”
BackgroundSynthesis of Ni Nanoparticles by Pulsed Laser Ablation Method in Liquid Phase
Ganjali, M., Ganjali, M., Vahdatkhah, P., & Marashi, S. M. B. (2015) · Procedia Materials Science · doi:10.1016/j.mspro.2015.11.127 · Cited by 40 · cited 2×
“[127] Ni NPs Laser fluence per pulse (50, 100, 150 mJ) Structural, optical, antibacterial property Energy bandgap changed with fluence.”
BackgroundDizajghorbani Aghdam, H., Azadi, H., Esmaeilzadeh, M., Moemen Bellah, S., & Malekfar, R. (2019) · Optical Materials · doi:10.1016/j.optmat.2019.03.027 · Cited by 40
Zhang, K., Ivanov, D. S., Ganeev, R. A., Boltaev, G. S., Krishnendu, P. S., Singh, S. C., Garcia, M. E., Zavestovskaya, I. N., & Guo, C. (2019) · Nanomaterials · doi:10.3390/nano9050767 · Cited by 39
Al-Douri, Y., Al-Samarai, R. A., Abdulateef, S. A., Odeh, A. A., Badi, N., & Voon, C. H. (2019) · Optik · doi:10.1016/j.ijleo.2018.09.158 · Cited by 38 · cited 1×
“[122] examined the effects of laser fluence on the size distribution of GaO NPs and observed an increased particle size with higher fluence; moreover, they reported that the particle size depended on the nature of the liquid environment.”
BackgroundSelf-citationEffect of electric fields on tin nanoparticles prepared by laser ablation in water
Sapkota, D., Li, Y., Musaev, O. R., Wrobel, J. M., & Kruger, M. B. (2017) · Journal of Laser Applications · doi:10.2351/1.4963270 · Cited by 38
Synthesis and properties of palladium nanoparticles by pulsed laser ablation in liquid
Mendivil, M. I., Krishnan, B., Castillo, G. A., & Shaji, S. (2015) · Applied Surface Science · doi:10.1016/j.apsusc.2015.03.075 · Cited by 38 · cited 1×
“[134] Pd NPs Laser wavelength: 1064 nm Pulse width: 10 ns Fluence: 40.”
BackgroundHaram, N., & Ahmad, N. (2013) · Applied Physics A · doi:10.1007/s00339-012-7329-0 · Cited by 38 · cited 1×
“[115] investigated the effects of fluence (5.”
SOLATI, E., & DORRANIAN, D. (2016) · Bulletin of Materials Science · doi:10.1007/s12034-016-1315-7 · Cited by 38 · cited 1×
“Solati and Dorranian [178] experimentally used this technique to investigate the characteristics of ZnO in distilled water at various temperatures (0 ◦C–60 ◦C).”
MethodAbbasi, M., & Dorranian, D. (2015) · Optics and Spectroscopy · doi:10.1134/s0030400x15030029 · Cited by 36 · cited 1×
“[113] examined the effects of laser fluence (1–3 J/m2) on Al NPs generated using PLA of Al in deionised water.”
MethodMicrowave Synthetic Routes for Shape-Controlled Catalyst Nanoparticles and Nanocomposites
Chin, C. D., Treadwell, L. J., & Wiley, J. B. (2021) · Molecules · doi:10.3390/molecules26123647 · Cited by 36
Rare-earths doped-nanoparticles prepared by pulsed laser ablation in liquids
Du, H., Castaing, V., Guo, D., & Viana, B. (2020) · Ceramics International · doi:10.1016/j.ceramint.2020.04.291 · Cited by 35 · cited 1×
“[64] recognised rare-earth-activated NPs from various applications, including high-tech products, green technologies, bioimaging, and medical usage.”
BackgroundSynthesis of metal nanoparticles using laser ablation technique
Mansoureh, G., & Parisa, V. (2018) · Emerging Applications of Nanoparticles and Architecture Nanostructures · doi:10.1016/b978-0-323-51254-1.00019-1 · Cited by 35 · cited 1×
“Factors, such as laser ablation time and medium, affect the properties of the produced NPs [62].”
BackgroundAl‐Kattan, A., Grojo, D., Drouet, C., Mouskeftaras, A., Delaporte, P. C., Casanova, A., Robin, J. D., Magdinier, F., Alloncle, A., Constantinescu, C. D., et al. (2021) · Nanomaterials · doi:10.3390/nano11030712 · Cited by 35 · cited 1×
“[38] analysed short-pulse lasers as a versatile tool for creating novel nano- and microstructures and compositional analysis for healthcare and wellbeing challenges, respectively.”
MethodNanocomposites as Advanced Materials for Aerospace Industry
(2012) · doi:10.13111/2066-8201.2012.4.4.6 · Cited by 34
Ion-Specific Effects on Laser Ablation of Silver in Aqueous Electrolyte Solutions
Šišková, K., Vlčková, B., Turpin, P. Y., & Fayet, C. (2008) · The Journal of Physical Chemistry C · doi:10.1021/jp076680a · Cited by 34 · cited 1×
“Using HCl, NaCl, and NaOH as electrolytes in an aqueous solution, stable Ag NPs were produced [144].”
Solati, E., & Dorranian, D. (2017) · Journal of Applied Spectroscopy · doi:10.1007/s10812-017-0497-0 · Cited by 33 · cited 1×
“They further estimated the lattice strain in the produced NPs and concluded that the size distribution highly depends on the temperature of the ablated environment [179].”
BackgroundSenegačnik, M., Kunimoto, K., Yamaguchi, S., Kimura, K., Sakka, T., & Gregorčič, P. (2021) · Ultrasonics Sonochemistry · doi:10.1016/j.ultsonch.2021.105460 · Cited by 32 · cited 1×
“[83] demonstrated that using the diffused illumination technique, the fluid dynamics of the bubble growth, expansion, and shrinkage can be examined more accurately.”
BackgroundNucleation and growth of nanoparticles in a plasma by laser ablation in liquid
Taccogna, F. (2015) · Journal of Plasma Physics · doi:10.1017/s0022377815000793 · Cited by 32 · cited 1×
“[93] presented a kinetic approach based on embryo growth through explicit sequential adhesion of ions by coupling between granule charge and plasma plume dynamics, resulting in the further aggregation and evaporation of atoms.”
MethodShabalina, A. V., Svetlichnyi, V. A., & Kulinich, S. A. (2022) · Current Opinion in Green and Sustainable Chemistry · doi:10.1016/j.cogsc.2021.100566 · Cited by 32
How nanoparticles have ameliorated the challenges in drilling operations
Hussain, A., Emadi, H., & Botchway, K. (2020) · Journal of Petroleum Science and Engineering · doi:10.1016/j.petrol.2020.107931 · Cited by 30
In situ study of nucleation and aggregation phases for nanoparticles grown by laser-driven methods
Barberio, M., & Antici, P. (2017) · Scientific Reports · doi:10.1038/srep41372 · Cited by 28 · cited 1×
“[92] investigated the nucleation and aggregation stages of metallic NPs in a colloidal solution during laser ablation.”
BackgroundValverde-Alva, M. A., García-Fernández, T., Esparza-Alegría, E., Villagrán-Muniz, M., Sánchez-Aké, C., Castañeda-Guzmán, R., de la Mora, M. B., Márquez-Herrera, C. E., & Sánchez Llamazares, J. L. (2016) · Laser Physics Letters · doi:10.1088/1612-2011/13/10/106002 · Cited by 28 · cited 2×
“[125] investigated the effects of the laser ablation efficiency by varying the PRR (1–10 Hz) of Ag NPs in ethanol.”
BackgroundLaser ablation parameters influencing gold nanoparticle synthesis in water
Torrisi, L., & Torrisi, A. (2018) · Radiation Effects and Defects in Solids · doi:10.1080/10420150.2018.1528598 · Cited by 28 · cited 1×
“However, if it is thicker, plasma confinement occurs, causing the cavitation area to be in the free boundary region [86].”
BackgroundBegildayeva, T., Chinnadurai, D., Lee, S. J., Yu, Y., Song, J. K., & Choi, M. Y. (2022) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2021.163446 · Cited by 27 · cited 1×
“PLA of Ni and Sn in liquid has been shown to produce core-shell type formations with a metal core and oxide layer on the surface [142].”
BackgroundAltuwirqi, R. M., Baatiyah, B., Nugali, E., Hashim, Z., & Al-Jawhari, H. (2020) · Journal of Nanomaterials · doi:10.1155/2020/1327868 · Cited by 26 · cited 1×
“[56] Al NPs Laser wavelength: 532 nm Ablation time: 15 min PRR: 10 Hz Pulse width: 6 ns Structure, morphology Spherical morphology, core-shell nanostructure formation Average diameter: 12 ± 9 nm”
BackgroundGamma-radiation induced synthesis of freestanding nickel nanoparticles
Yang, Y., Johansson, M., Wiorek, A., Tarakina, N. V., Sayed, F., Mathieu, R., Jonsson, M., & Soroka, I. L. (2021) · Dalton Transactions · doi:10.1039/d0dt03223a · Cited by 26 · cited 1×
“When performing a PLAL process in metals, the properties of the target material, such as light and heat absorption, thermal diffusivity (DT), attenuation coefficient (α), the heat of vaporisation (Hv), and density (ρ), dictate the laser performance [18].”
MethodEffects of Liquid Ablation Environment on the Characteristics of TiO2 Nanoparticles
Solati, E., Aghazadeh, Z., & Dorranian, D. (2019) · Journal of Cluster Science · doi:10.1007/s10876-019-01701-w · Cited by 26 · cited 1×
“[154] Distilled water, acetone, CTAB Effect of liquid environment on the properties of TiO2 Polycrystalline, spherical-shaped NPs Distilled water produces smaller, narrow size distribution, better adhesion than other solvents”
BackgroundDowding, C. (2010) · Elsevier eBooks · doi:10.1533/9781845699819.7.575 · Cited by 25
Parameters Affecting the Size of Gold Nanoparticles Prepared by Pulsed Laser Ablation in Liquid
Naser, H., Shanshool, H. M., & Imhan, K. I. (2021) · Brazilian Journal of Physics · doi:10.1007/s13538-021-00875-x · Cited by 25
Choudhury, K., Singh, R. K., Kumar, P., Ranjan, M., Srivastava, A., & Kumar, A. (2019) · Nano-Structures & Nano-Objects · doi:10.1016/j.nanoso.2018.12.006 · Cited by 24 · cited 1×
“[95], where the target geometry (Cu and Au) was confined to a limited space due to which the generated shockwave reflected from the confined boundary and interacted with the plasma plume, leading to longer nucleation and hence the formation of larger NPs.”
BackgroundLaser ablation of Ni in the presence of external magnetic field: Selection of microsized particles
Nikov, R., Nedyalkov, N., & Karashanova, D. B. (2020) · Applied Surface Science · doi:10.1016/j.apsusc.2020.146211 · Cited by 23 · cited 1×
“[175] presented a method for fabricating micron size particles using PLA of nickel in double distilled water and ethanol under an external magnetic field.”
MethodEffects of wavelength and fluence on the graphene nanosheets produced by pulsed laser ablation
Solati, E., Vaghri, E., & Dorranian, D. (2018) · Applied Physics A · doi:10.1007/s00339-018-2176-2 · Cited by 22 · cited 1×
“[107] investigated the influence of both laser wavelength and fluence on structural formation.”
BackgroundNikolov, A. S., Balchev, I. I., Nedyalkov, N. N., Kostadinov, I. K., Karashanova, D. B., & Atanasova, G. B. (2017) · Applied Physics A · doi:10.1007/s00339-017-1328-0 · Cited by 22 · cited 1×
“[126] and optimal conditions were determined to achieve the highest ablation efficiency.”
Background(2017) · doi:10.1007/s40243-017-0095-3 · Cited by 22 · cited 1×
“In this process, bulk metal alloy targets or one metal is ablated into colloidal NPs of other metals to create a hybrid combination of nanocomposites [183,184] for new applications, such as bioimaging and solar cell materials [185].”
BackgroundMetal Oxide Nanoparticle Preparation by Pulsed Laser Ablation of Metallic Targets in Liquid
Svetlichnyi, V. A., Shabalina, A. V., Lapin, I. N., & Goncharova, D. A. (2016) · Applications of Laser Ablation - Thin Film Deposition, Nanomaterial Synthesis and Surface Modification · doi:10.5772/65430 · Cited by 22 · cited 1×
“Subsequently, the plasma is quenched in the liquid, leading to the formation of electrically charged NPs in metastable phases [74].”
BackgroundMahdieh, M. H., & Mozaffari, H. (2017) · Physics Letters A · doi:10.1016/j.physleta.2017.08.030 · Cited by 21 · cited 1×
“[167], in their study on PLA of Al NPs under an electric field, concluded that the initial charge on the target has a significant effect on the morphology of the produced NPs.”
BackgroundIsmail, R. A., Sulaiman, G. M., & Abdulrahman, S. A. (2016) · International Journal of Modern Physics B · doi:10.1142/s0217979216500946 · Cited by 20 · cited 1×
“[173] conducted a study on the influence of a magnetic field on synthesised iron oxide NPs immersed in dimethylformamide.”
BackgroundMoniri, S., Hantehzadeh, M. R., Ghoranneviss, M., & Asadabad, M. A. (2017) · Applied Physics A · doi:10.1007/s00339-017-1311-9 · Cited by 20
Hao, J., Xu, S., Gao, B., & Pan, L. (2020) · Nanomaterials · doi:10.3390/nano10030439 · Cited by 20
BALADI, A., & MAMOORY, R. S. (2012) · International Journal of Modern Physics: Conference Series · doi:10.1142/s2010194512001845 · Cited by 19 · cited 1×
“[104] synthesised Al NPs using PLA of an Al target in ethanol and observed higher ablation efficiency and fine NP generation at higher wavelengths (1064 nm) than at a wavelength of 533 nm.”
Method(2020) · doi:10.3103/s0003701x20050035 · Cited by 17 · cited 1×
“In the viewpoint of application, metal NPs have been extensively used in various industrial applications, such as in nanofilters for wastewater treatment in the petroleum industry [3], heterogeneous catalysts in the chemical industry [4], photodetectors in the automotive and space industries [5,6], quantum dots in the…”
BackgroundNikov, R., Nedyalkov, N., Atanasov, P. A., & Karashanova, D. B. (2017) · Applied Physics A · doi:10.1007/s00339-017-1105-0 · Cited by 17 · cited 1×
“[159] Chloroform, toluene and ethanol Study on the effect of optical properties and size distribution in different solvents for Au NPs Spherical and spheroidal morphology, elongated nanostructures Mean size distribution influenced by the liquid medium”
BackgroundKotha, R., Fernandes, G., Nikam, A. N., Kulkarni, S., Pandey, A., Pandey, S., & Mutalik, S. (2020) · Materials Science and Technology · doi:10.1080/02670836.2020.1832323 · Cited by 17 · cited 1×
“Based on a previous study, alloy NPs have improved thermophysical properties compared to single-metal NPs [186].”
BackgroundPulsed laser ablation in a cooled liquid environment
Hong, M. H., Ng, K. Y., Xie, Q., Shi, L. P., & Chong, T. C. (2008) · Applied Physics A · doi:10.1007/s00339-008-4675-z · Cited by 17 · cited 1×
“[182] investigated the impact of a cooled liquid environment at room temperature.”
BackgroundGhaem, E. N., Dorranian, D., & Sari, A. H. (2021) · Optical and Quantum Electronics · doi:10.1007/s11082-020-02694-x · Cited by 17 · cited 1×
“[170] examined the effects of a DC magnetic field on Co NPs in distilled water.”
BackgroundMahdieh, M. H., & Khosravi, A. (2020) · Nano-Structures & Nano-Objects · doi:10.1016/j.nanoso.2020.100580 · Cited by 16 · cited 2×
“Apart from its usage in the commercial industry, researchers have studied the use of PLAL in increasing the productivity of NPs. Mahdieh and Khosravi [31] reported an increase in the productivity of colloidal brass NPs synthesised using PLAL in the presence of external electric fields.”
BackgroundHaram, N., & Ahmad, N. (2015) · Journal of Cluster Science · doi:10.1007/s10876-014-0731-3 · Cited by 16 · cited 1×
“Haram and Ahmed [180] examined the formation of Ag and Au nanochains and superclusters in distilled water at 70 ◦C.”
BackgroundOptimisation of GaAs nanocrystals synthesis by laser ablation in water
Sharifi, T., Dorranian, D., & Torkamany, M. J. (2013) · Journal of Experimental Nanoscience · doi:10.1080/17458080.2011.608729 · Cited by 16 · cited 1×
“[190] synthesised GaAs nanocrystals using PLA of a GaAs wafer in liquid.”
MethodComplex nanostructures synthesized from nanoparticle colloids under an external electric field
Liu, P., Yang, S., Fang, M., Luo, X., & Cai, W. (2011) · Nanoscale · doi:10.1039/c1nr10808e · Cited by 15 · cited 1×
“[168] presented a novel technique for generating varying nanostructures (i.”
MethodMozaffari, H., & Mahdieh, M. H. (2020) · Optics & Laser Technology · doi:10.1016/j.optlastec.2020.106083 · Cited by 14
Ohta, R., Gerile, N., Kaga, M., et al. (2021) · Nanotechnology · doi:10.1088/1361-6528/abef2b · Cited by 12
The effect of magnetic fields on the products of laser ablation
Musaev, O. R., Sutter, E. A., Wrobel, J. M., & Kruger, M. B. (2016) · Applied Physics A · doi:10.1007/s00339-016-9636-3 · Cited by 10 · cited 1×
“[176] observed a higher fraction of spherical and shorter nanowires during the synthesis of Au NPs due to the presence of a magnetic field.”
BackgroundQuantum Theory of Inverse Bremsstrahlung Absorption and Pair Production
Seely, J. F. (1974) · Laser Interaction and Related Plasma Phenomena · doi:10.1007/978-1-4684-8416-8_20 · Cited by 10 · cited 1×
“When laser-induced photonic energy strikes the metal surface, inverse bremsstrahlung (IB) [78] occurs, where radiation absorption results in the vibration of the electrons, which are ejected because of the formation of superheated plasma at temperatures of 4000–6000 K [79] and explosive solid–vapor phase transition.”
BackgroundNonlinear mixing of Nd:YAG lasers; harmonic and sum frequency generation
Walsh, B. M. (2017) · Optical Materials · doi:10.1016/j.optmat.2016.07.007 · Cited by 9 · cited 1×
“laser source that is pumped using an arc lamp or a laser diode, which produces near IR wavelengths of light at λ = 1064 nm with the ability to double, triple, or quadruple the frequency using optics, adding to the versatility of this solid-state source [97].”
BackgroundMolybdenum oxide nanocolloids prepared by an external field-assisted laser ablation in water
Spadaro, S., Bonsignore, M., Fazio, E., Cimino, F., Speciale, A., Trombetta, D., Barreca, F., Saija, A., & Neri, F. (2018) · EPJ Web of Conferences · doi:10.1051/epjconf/201816704009 · Cited by 9 · cited 1×
“[161] examined the application of electric fields to producing molybdenum oxide NPs in water.”
BackgroundScattering Effects in Laser Attenuation System for Measurement of Droplet Number Density
Sulaiman, S. A., Ismail, A. K. A. A., & Azman, M. N. F. N. (2014) · Energy Procedia · doi:10.1016/j.egypro.2014.06.010 · Cited by 8
Influence of external magnetic field on laser-induced gold nanoparticles fragmentation
Serkov, A. A., Rakov, I. I., Simakin, A. V., Kuzmin, P. G., Shafeev, G. A., Mikhailova, G. N., Antonova, L. K., Troitskii, A. V., & Kuzmin, G. P. (2016) · Applied Physics Letters · doi:10.1063/1.4960482 · Cited by 8
Zhou, L., Pan, D., Guo, Z., Li, J., Huang, S., & Song, J. (2021) · ChemCatChem · doi:10.1002/cctc.202100123 · Cited by 8
(2022) · doi:10.1109/aset53988.2022.9734847 · Cited by 8
Self-citationPulsed Laser Synthesis of Bi-Metallic Nanoparticles for Biomedical Applications: A Review
Subhan, A., Mourad, A. I., & Das, S. (2022) · Advances in Science and Engineering Technology International Conferences (ASET) · doi:10.1109/aset53988.2022.9735057 · Cited by 7
Self-citationSa’adah, F., Miskiyah, R. Z., Hikmantiyah, N., & Khumaeni, A. (2019) · Journal of Physics: Conference Series · doi:10.1088/1742-6596/1153/1/012069 · Cited by 6 · cited 1×
“[124] analysed the effects of the PRR (i.”
BackgroundEffect of solvent in the synthesis of colloidal copper nanoparticles by pulse laser ablation method
Budiati, I. M., Sa’adah, F., Rifani, N. D., & Khumaeni, A. (2019) · AIP Conference Proceedings · doi:10.1063/1.5141616 · Cited by 6
The influence of pulsed laser ablation in liquids parameters on the synthesis of ZnO nanoparticles
Perez-Lopez, C. A., Perez-Taborda, J. A., Riascos, H., & Avila, A. (2020) · Journal of Physics: Conference Series · doi:10.1088/1742-6596/1541/1/012019 · Cited by 6 · cited 3×
“Solati et al. [106] investigated the effects of wavelength and pulse energy on the morphology of ZnO NPs in deionised water.”
BackgroundInfluentialSafa, M., Dorranian, D., Masoudi, A. A., & Matin, L. F. (2021) · Physica Scripta · doi:10.1088/1402-4896/abd057 · Cited by 6 · cited 1×
“[169] experimentally investigated the effects of varying the transverse magnetic field on NiO NPs.”
BackgroundHirtle, S., Terekhin, P. N., Schäfer, M., Kang, Y., Ashok, S., L’huillier, J. A., & Rethfeld, B. (2021) · Optical Engineering · doi:10.1117/1.oe.61.2.021003 · Cited by 5 · cited 1×
“Another fascinating area of research has emerged in PLAL, which involves the introduction of an external environment, such as an electric, magnetic, or temperature field, to examine the behaviour of NPs [160].”
BackgroundProduction of open cell Nickel-based metal foam from polyurethane template
(2022) · doi:10.1109/aset53988.2022.9734976 · Cited by 4
Self-citationRadio Frequency Plasma-Based Synthesis of Metallic Nanoparticles for Biomedical Application
Nagarajan, V., Sudan, S., & Sharma, K. (2021) · Springer eBooks · doi:10.1007/978-3-030-50703-9_19 · Cited by 4
Mechanism study of nanomaterial synthesis by pulsed laser ablation in liquid
Huang, H., & Lai, J. (2018) · Advanced Laser Processing and Manufacturing II · doi:10.1117/12.2502192 · Cited by 3 · cited 1×
“Compared with air and gaseous media, pulsed laser ablation in liquid (PLAL) medium is a highly popular technique extensively used for NP fabrication [28].”
Preparation of Aluminium Alloy Metal Nanoparticles by Liquid Pulsed-Laser Ablation
Roston, A. H. M., Isahak, W. N. R. W., & Mohamad, A. B. (2016) · Indian Journal of Science and Technology · doi:10.17485/ijst/2016/v9i21/95247 · Cited by 3
Recent Developments in Processing and Characterization of Metal Foam: Review
(2021) · doi:10.1115/imece2021-73258 · Cited by 1
Self-citationEffect of Laser Fluence on Siliver Nanoparticles Colloid
Xu, B., Song, R. G., & Wang, C. (2011) · Advanced Materials Research · doi:10.4028/www.scientific.net/amr.415-417.747 · Cited by 1
Research works printed but not linked: 5
- Madkour L.H. A Review: Metal Nanoparticles and Their Safety Processing in Functional Foods J. Chem. Sci. Chem. Eng. 2021 1 18 36
- Bhattacharyya A. Datta P.S. Chaudhuri P. Barik B.R. Nanotechnology-A New Frontier for Food Security in Socio Economic Development Proceedings of the Disaster Risk Vulnerablity Conference Kerala, India 12–14 March 2011 116 120
- Al-Haddad R.M.S. Hamid M.K. Jumaa T. Electric Field Effect on the Synthesis of Nanogold Particles by PLAL Int. J. Chem. Nat. Sci. 2015 3 269 274
- Abbas A.K. Ibrahim I.M. Naser D.K. The Effect of Electric and Magnetic Field on Silver Nanoparticles Prepared by Pulse Laser Ablation Int. J. Sci. Eng. Res. 2016 7 976 980
- Al-Dahash G. Obaid N.M. Majeed H.A. The Effect of Liquid Environment and Magnetic Field on Optical Properties of Pt Nanoparticles Colloidal Prepared by Pulsed Laser Ablation Int. J. Chem. Tech. Res. 2016 9 118 130
Cited by
(2024) · doi:10.1016/j.btre.2024.e00830 · Cited by 154
“A laser ablation heating method melts and evaporates materials like metals and compounds while creating nanostructures in a high vacuum environment [60].”
MethodRecent Progress in the Application of Palladium Nanoparticles: A Review
Alaqarbeh, M., Adil, S. F., Ghrear, T., Khan, M., Bouachrıne, M., & Al‐Warthan, A. (2023) · Catalysts · doi:10.3390/catal13101343 · Cited by 102
Unlocking the Potential of Silver Nanoparticles: From Synthesis to Versatile Bio-Applications
Almatroudi, A. (2024) · Pharmaceutics · doi:10.3390/pharmaceutics16091232 · Cited by 58
“The manipulation of laser parameters, including wavelength, pulse duration, and energy, allows for the regulation of the size and shape of the nanoparticles [134,135].”
BackgroundManda, A. A., Haladu, S. A., Elsayed, K. A., Gaya, U. I., Alheshibri, M., Baroot, A. F. A., Çevik, E., Ercan, İ., Ercan, F., Kayed, T. S., et al. (2023) · Optics & Laser Technology · doi:10.1016/j.optlastec.2022.109105 · Cited by 42
Metadata
- Authors
- Subhan, A., Mourad, A.-H. I., & Al-Douri, Y.
- Affiliations
- United Arab Emirates University (AE)
- Bahçeşehir University (TR)
- Corresponding author
- Mourad, Abdel-Hamid Ismail
- Venue
- Nanomaterials
- Publisher
- MDPI AG
- Published
- 2022-06-22
- Volume
- 12
- Issue
- 13
- Pages
- 2144
- ISSN
- 2079-4991 (ISSN-L)
- PMC
- PMC9268572
- OpenAlex
- W4283316521
- Cited by
- 95
- References
- 197
- Citations by year
- 2026: 24 · 2025: 29 · 2024: 28 · 2023: 13 · 2022: 1
- FWCI
- 1.58
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- Locations
- Nanomaterials (publishedVersion, cc-by)
- PubMed Central (publishedVersion, cc-by)
- PubMed (publishedVersion)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Funders
- UAE University (#12R015, #31R238)
- University of Malaya (#12R015, #31R238)
- University of California, Berkeley (#12R015, #31R238)
- Topics
- Physical Sciences › Materials Science › Materials Chemistry › Laser-Ablation Synthesis of Nanoparticles
- Physical Sciences › Materials Science › Electronic, Optical and Magnetic Materials › Gold and Silver Nanoparticles Synthesis and Applications
- Physical Sciences › Physics and Astronomy › Acoustics and Ultrasonics › Ultrasound and Cavitation Phenomena
- Keywords
- pulsed laser ablation in liquid, colloidal metal nanoparticles, laser processing parameters, external fields, nanoparticle morphology, size distribution, ligand-free nanoparticles, green synthesis of nanoparticles, ablation rate, laser ablation mechanism
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
The claim verdicts this report counts are experimental: their accuracy is not yet measured.
A language model drew the claims from the paper on 2026-10-10, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).
A second model labelled each claim on 2026-10-10 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).
Cited sources are checked with a language model’s help (qwen3.8-omni-flash and gpt-6-sol).
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.