The DOI matches its Crossref record; 302 of the 302 references it cites were found in a registry or an index.
Recent Progress on Polymer Materials for Additive Manufacturing
Open accessAbstract
Additive manufacturing (AM) is the process of printing 3D objects in a layer‐by‐layer manner. Polymers and their composites are some of the most widely used materials in modern industries and are of great interest in the field of AM due to their vast potential for various applications, especially in the medical, aerospace, and automotive industries. Many studies have been conducted to develop new polymer materials for AM techniques, which include vat photopolymerization, material jetting, powder bed fusion, material extrusion, binder jetting, and sheet lamination. Although several reviews on the development of polymer materials for AM have been published, most of them only focus on a specific application, process, or type of material. Therefore, this article serves to provide a comprehensive review on the progress in polymer material development for AM techniques. It begins with an introduction to different AM techniques, followed by highlighting the progress of their development. Material requirements, notable advances in newly developed materials and their potential applications are discussed in detail and summarized. This review concludes by identifying the major challenges currently encountered in using AM for polymer materials and providing insights into the valuable opportunities it presents, in hopes of spurring further development in this field.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
1 retracted
Xu, S., Xu, S., Zhou, P., Cheng, X., Xie, Y., Liang, C., & Li, C. (2013) · International Journal of Nanomedicine · doi:10.2147/ijn.s50685 · Cited by 160
RetractedPolymers for 3D Printing and Customized Additive Manufacturing
Ligon, S. C., Liska, R., Stampfl, J., Gurr, M., & Mülhaupt, R. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00074 · Cited by 3,741
Biomaterials & scaffolds for tissue engineering
O'Brien, F. J. (2011) · Materials Today · doi:10.1016/s1369-7021(11)70058-x · Cited by 3,437
3D printing of polymer matrix composites: A review and prospective
Wang, X., Jiang, M., Zhou, Z., Gou, J., & Hui, D. (2017) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2016.11.034 · Cited by 3,325
Sydney Gladman, A., Matsumoto, E. A., Nuzzo, R. G., Mahadevan, L., & Lewis, J. A. (2016) · Nature Materials · doi:10.1038/nmat4544 · Cited by 3,027
Additive Manufacturing Technologies: Rapid Prototyping to Direct Digital Manufacturing
Gibson, I., Rosen, D. W., & Stucker, B. (2010) · National University of Singapore · doi:10.1007/978-1-4419-1120-9 · Cited by 2,969
Three-Dimensional Scaffolds for Tissue Engineering Applications: Role of Porosity and Pore Size
Loh, Q. L., & Choong, C. (2013) · Tissue Engineering Part B: Reviews · doi:10.1089/ten.teb.2012.0437 · Cited by 2,668
A review on stereolithography and its applications in biomedical engineering
Melchels, F. P. W., Feijen, J., & Grijpma, D. W. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.04.050 · Cited by 2,457
Continuous liquid interface production of 3D objects
Tumbleston, J. R., Shirvanyants, D., Ermoshkin, N., Janusziewicz, R., Johnson, A. R., Kelly, D., Chen, K., Pinschmidt, R., Rolland, J. P., Ermoshkin, A., et al. (2015) · Science · doi:10.1126/science.aaa2397 · Cited by 2,278
Additive manufacturing: technology, applications and research needs
Guo, N., & Leu, M. C. (2013) · Frontiers of Mechanical Engineering · doi:10.1007/s11465-013-0248-8 · Cited by 2,073
Derby, B. (2010) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-070909-104502 · Cited by 1,984
Hinton, T. J., Jallerat, Q., Palchesko, R. N., Park, J. H., Grodzicki, M. S., Shue, H.-J., Ramadan, M. H., Hudson, A. R., & Feinberg, A. W. (2015) · Science Advances · doi:10.1126/sciadv.1500758 · Cited by 1,805
3D bioprinting of collagen to rebuild components of the human heart
Lee, A., Hudson, A. R., Shiwarski, D. J., Tashman, J. W., Hinton, T. J., Yerneni, S., Bliley, J. M., Campbell, P. G., & Feinberg, A. W. (2019) · Science · doi:10.1126/science.aav9051 · Cited by 1,782
Direct Ink Writing of 3D Functional Materials
Lewis, J. A. (2006) · Advanced Functional Materials · doi:10.1002/adfm.200600434 · Cited by 1,740
Ning, F., Cong, W., Qiu, J., Wei, J., & Wang, S. (2015) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2015.06.013 · Cited by 1,718
3D‐Printing of Lightweight Cellular Composites
Compton, B. G., & Lewis, J. A. (2014) · Advanced Materials · doi:10.1002/adma.201401804 · Cited by 1,626
Printing soft matter in three dimensions
Truby, R. L., & Lewis, J. A. (2016) · Nature · doi:10.1038/nature21003 · Cited by 1,622
Markstedt, K., Mantas, A., Tournier, I., Martínez Ávila, H., Hägg, D., & Gatenholm, P. (2015) · Biomacromolecules · doi:10.1021/acs.biomac.5b00188 · Cited by 1,528
Highly oriented carbon fiber–polymer composites via additive manufacturing
Tekinalp, H. L., Kunc, V., Velez-Garcia, G. M., Duty, C. E., Love, L. J., Naskar, A. K., Blue, C. A., & Ozcan, S. (2014) · Composites Science and Technology · doi:10.1016/j.compscitech.2014.10.009 · Cited by 1,514
Shape-memory polymers and their composites: stimulus methods and applications
Leng, J., Lan, X., Liu, Y., & Du, S. (2011) · Progress in Materials Science · doi:10.1016/j.pmatsci.2011.03.001 · Cited by 1,495
A review of melt extrusion additive manufacturing processes: I. Process design and modeling
N. Turner, B., Strong, R., & A. Gold, S. (2014) · Rapid Prototyping Journal · doi:10.1108/rpj-01-2013-0012 · Cited by 1,450
Consolidation phenomena in laser and powder-bed based layered manufacturing
Kruth, J.-P., Levy, G., Klocke, F., & Childs, T. H. C. (2007) · CIRP Annals · doi:10.1016/j.cirp.2007.10.004 · Cited by 1,444
Fundamentals and applications of 3D printing for novel materials
Lee, J.-Y., An, J., & Chua, C. K. (2017) · Applied Materials Today · doi:10.1016/j.apmt.2017.02.004 · Cited by 1,354
Three-dimensional printing of continuous-fiber composites by in-nozzle impregnation
Matsuzaki, R., Ueda, M., Namiki, M., Jeong, T.-K., Asahara, H., Horiguchi, K., Nakamura, T., Todoroki, A., & Hirano, Y. (2016) · Scientific Reports · doi:10.1038/srep23058 · Cited by 1,171
Interface and performance of 3D printed continuous carbon fiber reinforced PLA composites
Tian, X., Liu, T., Yang, C., Wang, Q., & Li, D. (2016) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2016.05.032 · Cited by 1,162
Multimaterial 4D Printing with Tailorable Shape Memory Polymers
Ge, Q., Sakhaei, A. H., Lee, H., Dunn, C. K., Fang, N. X., & Dunn, M. L. (2016) · Scientific Reports · doi:10.1038/srep31110 · Cited by 1,160
Additive manufacturing of polymer-derived ceramics
Eckel, Z. C., Zhou, C., Martin, J. H., Jacobsen, A. J., Carter, W. B., & Schaedler, T. A. (2016) · Science · doi:10.1126/science.aad2688 · Cited by 1,106
Direct 3D Printing of Shear‐Thinning Hydrogels into Self‐Healing Hydrogels
Highley, C. B., Rodell, C. B., & Burdick, J. A. (2015) · Advanced Materials · doi:10.1002/adma.201501234 · Cited by 1,043
3D Printing of Personalized Thick and Perfusable Cardiac Patches and Hearts
Noor, N., Shapira, A., Edri, R., Gal, I., Wertheim, L., & Dvir, T. (2019) · Advanced Science · doi:10.1002/advs.201900344 · Cited by 1,042
Materials for additive manufacturing
Bourell, D., Kruth, J. P., Leu, M., Levy, G., Rosen, D., Beese, A. M., & Clare, A. (2017) · CIRP Annals · doi:10.1016/j.cirp.2017.05.009 · Cited by 1,034
Bone Mechanical Properties in Healthy and Diseased States
Morgan, E. F., Unnikrisnan, G. U., & Hussein, A. I. (2018) · Annual Review of Biomedical Engineering · doi:10.1146/annurev-bioeng-062117-121139 · Cited by 1,026
Volumetric additive manufacturing via tomographic reconstruction
Kelly, B. E., Bhattacharya, I., Heidari, H., Shusteff, M., Spadaccini, C. M., & Taylor, H. K. (2019) · Science · doi:10.1126/science.aau7114 · Cited by 1,025
Voxelated soft matter via multimaterial multinozzle 3D printing
Skylar-Scott, M. A., Mueller, J., Visser, C. W., & Lewis, J. A. (2019) · Nature · doi:10.1038/s41586-019-1736-8 · Cited by 1,024
FDM process parameters influence over the mechanical properties of polymer specimens: A review
Popescu, D., Zapciu, A., Amza, C., Baciu, F., & Marinescu, R. (2018) · Polymer Testing · doi:10.1016/j.polymertesting.2018.05.020 · Cited by 1,015
A global sustainability perspective on 3D printing technologies
Gebler, M., Schoot Uiterkamp, A. J. M., & Visser, C. (2014) · Energy Policy · doi:10.1016/j.enpol.2014.08.033 · Cited by 950
3D printing of smart materials: A review on recent progresses in 4D printing
Khoo, Z. X., Teoh, J. E. M., Liu, Y., Chua, C. K., Yang, S., An, J., Leong, K. F., & Yeong, W. Y. (2015) · Virtual and Physical Prototyping · doi:10.1080/17452759.2015.1097054 · Cited by 912
3D Printing of Shape Memory Polymers for Flexible Electronic Devices
Zarek, M., Layani, M., Cooperstein, I., Sachyani, E., Cohn, D., & Magdassi, S. (2016) · Advanced Materials · doi:10.1002/adma.201503132 · Cited by 903
Material issues in additive manufacturing: A review
Singh, S., Ramakrishna, S., & Singh, R. (2017) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2016.11.006 · Cited by 899
Laser sintering of polyamides and other polymers
Goodridge, R. D., Tuck, C. J., & Hague, R. J. M. (2012) · Progress in Materials Science · doi:10.1016/j.pmatsci.2011.04.001 · Cited by 835
Lasers and materials in selective laser sintering
Kruth, J. P., Wang, X., Laoui, T., & Froyen, L. (2003) · Assembly Automation · doi:10.1108/01445150310698652 · Cited by 826
Direct Ink Writing of Three‐Dimensional Ceramic Structures
Lewis, J. A., Smay, J. E., Stuecker, J., & Cesarano, J. (2006) · Journal of the American Ceramic Society · doi:10.1111/j.1551-2916.2006.01382.x · Cited by 823
Binder jetting: A review of process, materials, and methods
Ziaee, M., & Crane, N. B. (2019) · Additive Manufacturing · doi:10.1016/j.addma.2019.05.031 · Cited by 819
Dickson, A. N., Barry, J. N., McDonnell, K. A., & Dowling, D. P. (2017) · Additive Manufacturing · doi:10.1016/j.addma.2017.06.004 · Cited by 792
A Simple, Low-Cost Conductive Composite Material for 3D Printing of Electronic Sensors
Leigh, S. J., Bradley, R. J., Purssell, C. P., Billson, D. R., & Hutchins, D. A. (2012) · PLoS ONE · doi:10.1371/journal.pone.0049365 · Cited by 787
Active materials by four-dimension printing
Ge, Q., Qi, H. J., & Dunn, M. L. (2013) · Applied Physics Letters · doi:10.1063/1.4819837 · Cited by 785
Turner, B. N., & Gold, S. A. (2015) · Rapid Prototyping Journal · doi:10.1108/rpj-02-2013-0017 · Cited by 770
Ge, Q., Dunn, C. K., Qi, H. J., & Dunn, M. L. (2014) · Smart Materials and Structures · doi:10.1088/0964-1726/23/9/094007 · Cited by 726
Rapid prototyping of continuous carbon fiber reinforced polylactic acid composites by 3D printing
Li, N., Li, Y., & Liu, S. (2016) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2016.07.025 · Cited by 707
Direct 4D Printing Via Active Composite Materials
Ding, Z., Yuan, C., Peng, X., Wang, T., Qi, H. J., & Dunn, M. L. (2017) · Science Advances · doi:10.1126/sciadv.1602890 · Cited by 692
Highly Stretchable and UV Curable Elastomers for Digital Light Processing Based 3D Printing
Patel, D. K., Sakhaei, A. H., Layani, M., Zhang, B., Ge, Q., & Magdassi, S. (2017) · Advanced Materials · doi:10.1002/adma.201606000 · Cited by 673
Yang, C., Tian, X., Li, D., Cao, Y., Zhao, F., & Shi, C. (2017) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2017.04.027 · Cited by 662
Gauvin, R., Chen, Y.-C., Lee, J. W., Soman, P., Zorlutuna, P., Nichol, J. W., Bae, H., Chen, S., & Khademhosseini, A. (2012) · Biomaterials · doi:10.1016/j.biomaterials.2012.01.048 · Cited by 641
Ning, F., Cong, W., Hu, Y., & Wang, H. (2017) · Journal of Composite Materials · doi:10.1177/0021998316646169 · Cited by 632
Measurements of the mechanical response of unidirectional 3D-printed PLA
Song, Y., Li, Y., Song, W., Yee, K., Lee, K.-Y., & Tagarielli, V. L. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.03.051 · Cited by 624
Recent Progress in Additive Manufacturing of Fiber Reinforced Polymer Composite
Goh, G. D., Yap, Y. L., Agarwala, S., & Yeong, W. Y. (2019) · Advanced Materials Technologies · doi:10.1002/admt.201800271 · Cited by 621
Yakacki, C. M., Shandas, R., Lanning, C., Rech, B., Eckstein, A., & Gall, K. (2007) · Biomaterials · doi:10.1016/j.biomaterials.2007.01.030 · Cited by 618
Weng, Z., Wang, J., Senthil, T., & Wu, L. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.04.045 · Cited by 609
Goh, G. D., Dikshit, V., Nagalingam, A. P., Goh, G. L., Agarwala, S., Sing, S. L., Wei, J., & Yeong, W. Y. (2018) · Materials & Design · doi:10.1016/j.matdes.2017.10.021 · Cited by 604
Laser based additive manufacturing in industry and academia
Schmidt, M., Merklein, M., Bourell, D., Dimitrov, D., Hausotte, T., Wegener, K., Overmeyer, L., Vollertsen, F., & Levy, G. N. (2017) · CIRP Annals · doi:10.1016/j.cirp.2017.05.011 · Cited by 602
3D Printing of Polymer Nanocomposites via Stereolithography
Manapat, J. Z., Chen, Q., Ye, P., & Advincula, R. C. (2017) · Macromolecular Materials and Engineering · doi:10.1002/mame.201600553 · Cited by 565
Advances in 3D printing of thermoplastic polymer composites and nanocomposites
Valino, A. D., Dizon, J. R. C., Espera, A. H., Chen, Q., Messman, J., & Advincula, R. C. (2019) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2019.101162 · Cited by 565
Mathematically defined tissue engineering scaffold architectures prepared by stereolithography
Melchels, F. P. W., Bertoldi, K., Gabbrielli, R., Velders, A. H., Feijen, J., & Grijpma, D. W. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.05.068 · Cited by 530
4D Printing with Mechanically Robust, Thermally Actuating Hydrogels
Bakarich, S. E., Gorkin, R., Panhuis, M. I. H., & Spinks, G. M. (2015) · Macromolecular Rapid Communications · doi:10.1002/marc.201500079 · Cited by 526
Fracture Surface Analysis of 3D-Printed Tensile Specimens of Novel ABS-Based Materials
Torrado Perez, A. R., Roberson, D. A., & Wicker, R. B. (2014) · Journal of Failure Analysis and Prevention · doi:10.1007/s11668-014-9803-9 · Cited by 523
3D Printing of Highly Stretchable, Shape-Memory, and Self-Healing Elastomer toward Novel 4D Printing
Kuang, X., Chen, K., Dunn, C. K., Wu, J., Li, V. C. F., & Qi, H. J. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b18265 · Cited by 523
3D Printing of Continuous Carbon Fibre Reinforced Thermo-Plastic (CFRTP) Tensile Test Specimens
Der Klift, F. V., Koga, Y., Todoroki, A., Ueda, M., Hirano, Y., & Matsuzaki, R. (2016) · Open Journal of Composite Materials · doi:10.4236/ojcm.2016.61003 · Cited by 516
Designing bioinspired composite reinforcement architectures via 3D magnetic printing
Martin, J. J., Fiore, B. E., & Erb, R. M. (2015) · Nature Communications · doi:10.1038/ncomms9641 · Cited by 515
3D printing for continuous fiber reinforced thermoplastic composites: mechanism and performance
Yang, C., Tian, X., Liu, T., Cao, Y., & Li, D. (2017) · Rapid Prototyping Journal · doi:10.1108/rpj-08-2015-0098 · Cited by 515
Scalable submicrometer additive manufacturing
Saha, S. K., Wang, D., Nguyen, V. H., Chang, Y., Oakdale, J. S., & Chen, S.-C. (2019) · Science · doi:10.1126/science.aax8760 · Cited by 513
Wei, H., Zhang, Q., Yao, Y., Liu, L., Liu, Y., & Leng, J. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b12824 · Cited by 504
Thermo-mechanical properties of a highly filled polymeric composites for Fused Deposition Modeling
Nikzad, M., Masood, S. H., & Sbarski, I. (2011) · Materials & Design · doi:10.1016/j.matdes.2011.01.056 · Cited by 503
The importance of carbon fiber to polymer additive manufacturing
Love, L. J., Kunc, V., Rios, O., Duty, C. E., Elliott, A. M., Post, B. K., Smith, R. J., & Blue, C. A. (2014) · Journal of Materials Research · doi:10.1557/jmr.2014.212 · Cited by 493
3D Printable Graphene Composite
Wei, X., Li, D., Jiang, W., Gu, Z., Wang, X., Zhang, Z., & Sun, Z. (2015) · Scientific Reports · doi:10.1038/srep11181 · Cited by 481
Christ, J. F., Aliheidari, N., Ameli, A., & Pötschke, P. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.06.011 · Cited by 481
Caminero, M. A., Chacón, J. M., García-Moreno, I., & Rodríguez, G. P. (2018) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2018.04.054 · Cited by 479
Mondschein, R. J., Kanitkar, A., Williams, C. B., Verbridge, S. S., & Long, T. E. (2017) · Biomaterials · doi:10.1016/j.biomaterials.2017.06.005 · Cited by 475
Additive Manufacturing of Dense Alumina Ceramics
Schwentenwein, M., & Homa, J. (2015) · International Journal of Applied Ceramic Technology · doi:10.1111/ijac.12319 · Cited by 465
Rapid, large-volume, thermally controlled 3D printing using a mobile liquid interface
Walker, D. A., Hedrick, J. L., & Mirkin, C. A. (2019) · Science · doi:10.1126/science.aax1562 · Cited by 459
Micro-stereolithography of polymeric and ceramic microstructures
Zhang, X., Jiang, X. N., & Sun, C. (1999) · Sensors and Actuators A: Physical · doi:10.1016/s0924-4247(99)00189-2 · Cited by 450
Solid Freeform Fabrication: A New Direction in Manufacturing
Beaman, J. J., Barlow, J. W., Bourell, D. L., Crawford, R. H., Marcus, H. L., & McAlea, K. P. (1997) · Springer eBooks · doi:10.1007/978-1-4615-6327-3 · Cited by 438
A poly(d,l-lactide) resin for the preparation of tissue engineering scaffolds by stereolithography
Melchels, F. P. W., Feijen, J., & Grijpma, D. W. (2009) · Biomaterials · doi:10.1016/j.biomaterials.2009.03.055 · Cited by 437
Stereolithography of SiOC Ceramic Microcomponents
Zanchetta, E., Cattaldo, M., Franchin, G., Schwentenwein, M., Homa, J., Brusatin, G., & Colombo, P. (2016) · Advanced Materials · doi:10.1002/adma.201503470 · Cited by 432
Duan, B., Wang, M., Zhou, W. Y., Cheung, W. L., Li, Z. Y., & Lu, W. W. (2010) · Acta Biomaterialia · doi:10.1016/j.actbio.2010.06.024 · Cited by 420
Yoshii, E. (1997) · Journal of Biomedical Materials Research · doi:10.1002/(sici)1097-4636(19971215)37:4<517::aid-jbm10>3.0.co;2-5 · Cited by 411
Digital light processing 3D printing of conductive complex structures
Mu, Q., Wang, L., Dunn, C. K., Kuang, X., Duan, F., Zhang, Z., Qi, H. J., & Wang, T. (2017) · Additive Manufacturing · doi:10.1016/j.addma.2017.08.011 · Cited by 411
Multi-shape active composites by 3D printing of digital shape memory polymers
Wu, J., Yuan, C., Ding, Z., Isakov, M., Mao, Y., Wang, T., Dunn, M. L., & Qi, H. J. (2016) · Scientific Reports · doi:10.1038/srep24224 · Cited by 399
Joe Lopes, A., MacDonald, E., & Wicker, R. B. (2012) · Rapid Prototyping Journal · doi:10.1108/13552541211212113 · Cited by 399
Dhariwala, B., Hunt, E., & Boland, T. (2004) · Tissue Engineering · doi:10.1089/1076327042500256 · Cited by 389
Direct writing of three-dimensional webs
Gratson, G. M., Xu, M., & Lewis, J. A. (2004) · Nature · doi:10.1038/428386a · Cited by 389
Tough Composites Inspired by Mineralized Natural Materials: Computation, 3D printing, and Testing
Dimas, L. S., Bratzel, G. H., Eylon, I., & Buehler, M. J. (2013) · Advanced Functional Materials · doi:10.1002/adfm.201300215 · Cited by 385
3D‐Printed Mechanical Metamaterials with High Energy Absorption
Yuan, S., Chua, C. K., & Zhou, K. (2019) · Advanced Materials Technologies · doi:10.1002/admt.201800419 · Cited by 380
Self-citationBio-inks for 3D bioprinting: recent advances and future prospects
Donderwinkel, I., van Hest, J. C. M., & Cameron, N. R. (2017) · Polymer Chemistry · doi:10.1039/c7py00826k · Cited by 378
3D Optical Printing of Piezoelectric Nanoparticle–Polymer Composite Materials
Kim, K., Zhu, W., Qu, X., Aaronson, C., McCall, W. R., Chen, S., & Sirbuly, D. J. (2014) · ACS Nano · doi:10.1021/nn503268f · Cited by 374
Self-citationDing, S., Zou, B., Wang, P., & Ding, H. (2019) · Polymer Testing · doi:10.1016/j.polymertesting.2019.105948 · Cited by 351
3D printed reversible shape changing components with stimuli responsive materials
Mao, Y., Ding, Z., Yuan, C., Ai, S., Isakov, M., Wu, J., Wang, T., Dunn, M. L., & Qi, H. J. (2016) · Scientific Reports · doi:10.1038/srep24761 · Cited by 348
Fabrication of highly conductive graphene flexible circuits by 3D printing
Zhang, D., Chi, B., Li, B., Gao, Z., Du, Y., Guo, J., & Wei, J. (2016) · Synthetic Metals · doi:10.1016/j.synthmet.2016.03.014 · Cited by 336
Layerless fabrication with continuous liquid interface production
Janusziewicz, R., Tumbleston, J. R., Quintanilla, A. L., Mecham, S. J., & DeSimone, J. M. (2016) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1605271113 · Cited by 332
4D printing of high performance shape memory polymer using stereolithography
Choong, Y. Y. C., Maleksaeedi, S., Eng, H., Wei, J., & Su, P.-C. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.04.049 · Cited by 328
Poly(dopamine) coating of 3D printed poly(lactic acid) scaffolds for bone tissue engineering
Kao, C.-T., Lin, C.-C., Chen, Y.-W., Yeh, C.-H., Fang, H.-Y., & Shie, M.-Y. (2015) · Materials Science and Engineering: C · doi:10.1016/j.msec.2015.06.028 · Cited by 327
Spoerk, M., Holzer, C., & Gonzalez‐Gutierrez, J. (2020) · Journal of Applied Polymer Science · doi:10.1002/app.48545 · Cited by 317
Yang, Y., Chen, Z., Song, X., Zhang, Z., Zhang, J., Shung, K. K., Zhou, Q., & Chen, Y. (2017) · Advanced Materials · doi:10.1002/adma.201605750 · Cited by 316
Mendes‐Felipe, C., Oliveira, J., Etxebarria, I., Vilas‐Vilela, J. L., & Lanceros‐Mendez, S. (2019) · Advanced Materials Technologies · doi:10.1002/admt.201800618 · Cited by 316
Preparation of poly(ε-caprolactone)-based tissue engineering scaffolds by stereolithography
Elomaa, L., Teixeira, S., Hakala, R., Korhonen, H., Grijpma, D. W., & Seppälä, J. V. (2011) · Acta Biomaterialia · doi:10.1016/j.actbio.2011.06.039 · Cited by 311
Additive layer manufacturing of poly (ether ether ketone) via FDM
Rinaldi, M., Ghidini, T., Cecchini, F., Brandao, A., & Nanni, F. (2018) · Composites Part B Engineering · doi:10.1016/j.compositesb.2018.03.029 · Cited by 301
Performance of biocompatible PEEK processed by fused deposition additive manufacturing
Arif, M. F., Kumar, S., Varadarajan, K. M., & Cantwell, W. J. (2018) · Materials & Design · doi:10.1016/j.matdes.2018.03.015 · Cited by 296
Yuan, S., Shen, F., Bai, J., Chua, C. K., Wei, J., & Zhou, K. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.01.098 · Cited by 295
Self-citationLee, K.-W., Wang, S., Fox, B. C., Ritman, E. L., Yaszemski, M. J., & Lu, L. (2007) · Biomacromolecules · doi:10.1021/bm060834v · Cited by 292
Is 3D printing safe? Analysis of the thermal treatment of thermoplastics: ABS, PLA, PET, and nylon
Wojtyła, S., Klama, P., & Baran, T. (2017) · Journal of Occupational and Environmental Hygiene · doi:10.1080/15459624.2017.1285489 · Cited by 288
Safranski, D. L., & Gall, K. (2008) · Polymer · doi:10.1016/j.polymer.2008.07.060 · Cited by 262
Biodegradable and bioactive porous scaffold structures prepared using fused deposition modeling
Korpela, J., Kokkari, A., Korhonen, H., Malin, M., Närhi, T., & Seppälä, J. (2013) · Journal of Biomedical Materials Research Part B: Applied Biomaterials · doi:10.1002/jbm.b.32863 · Cited by 258
Advanced Polymer Designs for Direct‐Ink‐Write 3D Printing
Li, L., Lin, Q., Tang, M., Duncan, A. J. E., & Ke, C. (2019) · Chemistry – A European Journal · doi:10.1002/chem.201900975 · Cited by 258
Materials perspective of polymers for additive manufacturing with selective laser sintering
Schmid, M., Amado, A., & Wegener, K. (2014) · Journal of Materials Research · doi:10.1557/jmr.2014.138 · Cited by 256
Review of 3D printable hydrogels and constructs
Li, H., Tan, C., & Li, L. (2018) · Materials & Design · doi:10.1016/j.matdes.2018.08.023 · Cited by 251
Wu, H., Cheng, Y., Liu, W., He, R., Zhou, M., Wu, S., Song, X., & Chen, Y. (2016) · Ceramics International · doi:10.1016/j.ceramint.2016.08.024 · Cited by 248
Alkoxy‐substituted diaryliodonium salt cationic photoinitiators
Crivello, J. V., & Lee, J. L. (1989) · Journal of Polymer Science Part A: Polymer Chemistry · doi:10.1002/pola.1989.080271207 · Cited by 239
Multimaterial 3D Printing of Highly Stretchable Silicone Elastomers
Zhou, L.-Y., Gao, Q., Fu, J.-Z., Chen, Q.-Y., Zhu, J.-P., Sun, Y., & He, Y. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b04873 · Cited by 237
Yan, C., Hao, L., Xu, L., & Shi, Y. (2011) · Composites Science and Technology · doi:10.1016/j.compscitech.2011.08.013 · Cited by 236
Processing of a Polyamide-12/carbon nanofibre composite by laser sintering
Goodridge, R. D., Shofner, M. L., Hague, R. J. M., McClelland, M., Schlea, M. R., Johnson, R. B., & Tuck, C. J. (2011) · Polymer Testing · doi:10.1016/j.polymertesting.2010.10.011 · Cited by 234
Das, A., Chatham, C. A., Fallon, J. J., Zawaski, C. E., Gilmer, E. L., Williams, C. B., & Bortner, M. J. (2020) · Additive Manufacturing · doi:10.1016/j.addma.2020.101218 · Cited by 234
Xu, N., Ye, X., Wei, D., Zhong, J., Chen, Y., Xu, G., & He, D. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am502716t · Cited by 231
Microwave dielectric characterisation of 3D-printed BaTiO3/ABS polymer composites
Castles, F., Isakov, D., Lui, A., Lei, Q., Dancer, C. E. J., Wang, Y., Janurudin, J. M., Speller, S. C., Grovenor, C. R. M., & Grant, P. S. (2016) · Scientific Reports · doi:10.1038/srep22714 · Cited by 231
Aliheidari, N., Christ, J., Tripuraneni, R., Nadimpalli, S., & Ameli, A. (2018) · Materials & Design · doi:10.1016/j.matdes.2018.07.001 · Cited by 230
Nyberg, E., Rindone, A., Dorafshar, A., & Grayson, W. L. (2017) · Tissue Engineering Part A · doi:10.1089/ten.tea.2016.0418 · Cited by 229
3D stereolithography printing of graphene oxide reinforced complex architectures
Lin, D., Jin, S., Zhang, F., Wang, C., Wang, Y., Zhou, C., & Cheng, G. J. (2015) · Nanotechnology · doi:10.1088/0957-4484/26/43/434003 · Cited by 228
Beck, E. C., Barragan, M., Tadros, M. H., Gehrke, S. H., & Detamore, M. S. (2016) · Acta Biomaterialia · doi:10.1016/j.actbio.2016.04.019 · Cited by 222
Yu, K., Ritchie, A., Mao, Y., Dunn, M. L., & Qi, H. J. (2015) · Procedia IUTAM · doi:10.1016/j.piutam.2014.12.021 · Cited by 220
3D direct writing fabrication of electrodes for electrochemical storage devices
Wei, M., Zhang, F., Wang, W., Alexandridis, P., Zhou, C., & Wu, G. (2017) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.04.042 · Cited by 220
Fused Deposition Modelling of high temperature polymers: Exploring CNT PEEK composites
Berretta, S., Davies, R., Shyng, Y. T., Wang, Y., & Ghita, O. (2017) · Polymer Testing · doi:10.1016/j.polymertesting.2017.08.024 · Cited by 218
Chemical insights into bioinks for 3D printing
Valot, L., Martinez, J., Mehdi, A., & Subra, G. (2019) · Chemical Society Reviews · doi:10.1039/c7cs00718c · Cited by 218
Two-photon-absorbed near-infrared photopolymerization for three-dimensional microfabrication
Maruo, S., & Kawata, S. (1998) · Journal of Microelectromechanical Systems · doi:10.1109/84.735349 · Cited by 217
New developments in fused deposition modeling of ceramics
Bellini, A., Shor, L., & Guceri, S. I. (2005) · Rapid Prototyping Journal · doi:10.1108/13552540510612901 · Cited by 216
Suitability of PLA/TCP for fused deposition modeling
Drummer, D., Cifuentes‐Cuéllar, S., & Rietzel, D. (2012) · Rapid Prototyping Journal · doi:10.1108/13552541211272045 · Cited by 210
A review on 3D printed smart devices for 4D printing
Lee, J., Kim, H.-C., Choi, J.-W., & Lee, I. H. (2017) · International Journal of Precision Engineering and Manufacturing-Green Technology · doi:10.1007/s40684-017-0042-x · Cited by 209
Morris, V. B., Nimbalkar, S., Younesi, M., McClellan, P., & Akkus, O. (2017) · Annals of Biomedical Engineering · doi:10.1007/s10439-016-1643-1 · Cited by 207
Fabrication of tough epoxy with shape memory effects by UV-assisted direct-ink write printing
Chen, K., Kuang, X., Li, V., Kang, G., & Qi, H. J. (2018) · Soft Matter · doi:10.1039/c7sm02362f · Cited by 207
3D Printed Multifunctional, Hyperelastic Silicone Rubber Foam
Chen, Q., Zhao, J., Ren, J., Rong, L., Cao, P., & Advincula, R. C. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201900469 · Cited by 201
He, S., Timmer, M. D., Yaszemski, M. J., Yasko, A. W., Engel, P. S., & Mikos, A. G. (2001) · Polymer · doi:10.1016/s0032-3861(00)00479-1 · Cited by 198
Photopolymers for rapid prototyping
Liska, R., Schuster, M., Inführ, R., Turecek, C., Fritscher, C., Seidl, B., Schmidt, V., Kuna, L., Haase, A., Varga, F., et al. (2007) · Journal of Coatings Technology and Research · doi:10.1007/s11998-007-9059-3 · Cited by 197
Yuan, S., Zheng, Y., Chua, C. K., Yan, Q., & Zhou, K. (2018) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2017.11.007 · Cited by 190
Self-citationFeedstock material property – process relationships in fused deposition of ceramics (FDC)
Venkataraman, N., Rangarajan, S., Matthewson, M. J., Harper, B., Safari, A., Danforth, S. C., Wu, G., Langrana, N., Guceri, S., & Yardimci, A. (2000) · Rapid Prototyping Journal · doi:10.1108/13552540010373344 · Cited by 188
Gebisa, A., & Lemu, H. (2018) · Materials · doi:10.3390/ma11040500 · Cited by 187
Selective laser sintering of hydroxyapatite/poly-ε-caprolactone scaffolds
Eosoly, S., Brabazon, D., Lohfeld, S., & Looney, L. (2010) · Acta Biomaterialia · doi:10.1016/j.actbio.2009.07.018 · Cited by 186
O’Connor, H. J., Dickson, A. N., & Dowling, D. P. (2018) · Additive Manufacturing · doi:10.1016/j.addma.2018.05.035 · Cited by 185
Mechanical Properties of a New Type of Architected Interpenetrating Phase Composite Materials
Al‐Ketan, O., Al‐Rub, R. K. A., & Rowshan, R. (2017) · Advanced Materials Technologies · doi:10.1002/admt.201600235 · Cited by 183
Li, Z., Pucher, N., Cicha, K., Torgersen, J., Ligon, S. C., Ajami, A., Husinsky, W., Rosspeintner, A., Vauthey, E., Naumov, S., et al. (2013) · Macromolecules · doi:10.1021/ma301770a · Cited by 181
Biomimetic additive manufactured polymer composites for improved impact resistance
Gu, G. X., Takaffoli, M., Hsieh, A. J., & Buehler, M. J. (2016) · Extreme Mechanics Letters · doi:10.1016/j.eml.2016.09.006 · Cited by 180
Li, L., & Fourkas, J. T. (2007) · Materials Today · doi:10.1016/s1369-7021(07)70130-x · Cited by 179
Dual-Responsive Hydrogels for Direct-Write 3D Printing
Zhang, M., Vora, A., Han, W., Wojtecki, R. J., Maune, H., Le, A. B. A., Thompson, L. E., McClelland, G. M., Ribet, F., Engler, A. C., et al. (2015) · Macromolecules · doi:10.1021/acs.macromol.5b01550 · Cited by 178
Screw extrusion-based additive manufacturing of PEEK
Tseng, J.-W., Liu, C.-Y., Yen, Y.-K., Belkner, J., Bremicker, T., Liu, B. H., Sun, T.-J., & Wang, A.-B. (2018) · Materials & Design · doi:10.1016/j.matdes.2017.11.032 · Cited by 177
Ultrafast 3D printing with submicrometer features using electrostatic jet deflection
Liashenko, I., Rosell-Llompart, J., & Cabot, A. (2020) · Nature Communications · doi:10.1038/s41467-020-14557-w · Cited by 177
Athreya, S. R., Kalaitzidou, K., & Das, S. (2010) · Materials Science and Engineering: A · doi:10.1016/j.msea.2009.12.028 · Cited by 175
Akhoundi, B., Nabipour, M., Hajami, F., & Shakoori, D. (2020) · Polymer Engineering and Science · doi:10.1002/pen.25353 · Cited by 172
Low-cycle fatigue behavior of 3d-printed PLA-based porous scaffolds
Senatov, F. S., Niaza, K. V., Stepashkin, A. A., & Kaloshkin, S. D. (2016) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2016.04.067 · Cited by 170
Badev, A., Abouliatim, Y., Chartier, T., Lecamp, L., Lebaudy, P., Chaput, C., & Delage, C. (2011) · Journal of Photochemistry and Photobiology A: Chemistry · doi:10.1016/j.jphotochem.2011.05.010 · Cited by 169
Three-Dimensional Printing of Shape Memory Composites with Epoxy-Acrylate Hybrid Photopolymer
Yu, R., Yang, X., Zhang, Y., Zhao, X., Wu, X., Zhao, T., Zhao, Y., & Huang, W. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b13531 · Cited by 168
Framework for Life Cycle Sustainability Assessment of Additive Manufacturing
Ribeiro, I., Matos, F., Jacinto, C., Salman, H., Cardeal, G., Carvalho, H., Godina, R., & Peças, P. (2020) · Sustainability · doi:10.3390/su12030929 · Cited by 168
3D printed anisotropic dielectric composite with meta-material features
Isakov, D. V., Lei, Q., Castles, F., Stevens, C. J., Grovenor, C. R. M., & Grant, P. S. (2016) · Materials & Design · doi:10.1016/j.matdes.2015.12.176 · Cited by 167
Wu, H., Chen, P., Yan, C., Cai, C., & Shi, Y. (2019) · Materials & Design · doi:10.1016/j.matdes.2019.107704 · Cited by 167
4D Printed Hydrogels: Fabrication, Materials, and Applications
Dong, Y., Wang, S., Ke, Y., Ding, L., Zeng, X., Magdassi, S., & Long, Y. (2020) · Advanced Materials Technologies · doi:10.1002/admt.202000034 · Cited by 167
Ronca, A., Ambrosio, L., & Grijpma, D. W. (2013) · Acta Biomaterialia · doi:10.1016/j.actbio.2012.12.004 · Cited by 165
Zhu, D., Ren, Y., Liao, G., Jiang, S., Liu, F., Guo, J., & Xu, G. J. (2017) · Journal of Applied Polymer Science · doi:10.1002/app.45332 · Cited by 164
4D printing of shape memory polyurethane via stereolithography
Zhao, T., Yu, R., Li, X., Cheng, B., Zhang, Y., Yang, X. M., Zhao, X., Zhao, Y., & Huang, W. (2018) · European Polymer Journal · doi:10.1016/j.eurpolymj.2018.02.021 · Cited by 161
Novel ABS-based binary and ternary polymer blends for material extrusion 3D printing
Rocha, C. R., Perez, A. R. T., Roberson, D. A., Shemelya, C. M., MacDonald, E. W., & Wicker, R. B. (2014) · Journal of materials research/Pratt's guide to venture capital sources · doi:10.1557/jmr.2014.158 · Cited by 157
Yan, M., Tian, X., Peng, G., Li, D., & Zhang, X. (2018) · Composites Science and Technology · doi:10.1016/j.compscitech.2018.06.023 · Cited by 155
Development of 3D PPF/DEF scaffolds using micro-stereolithography and surface modification
Lan, P. X., Lee, J. W., Seol, Y., & Cho, D. (2008) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-008-3567-2 · Cited by 154
Desolvation Induced Origami of Photocurable Polymers by Digit Light Processing
Zhao, Z., Wu, J., Mu, X., Chen, H., Qi, H. J., & Fang, D. (2017) · Macromolecular Rapid Communications · doi:10.1002/marc.201600625 · Cited by 153
Mechanical characterization of biocompatible PEEK by FDM
Zhao, Y., Zhao, K., Li, Y., & Chen, F. (2020) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2020.04.063 · Cited by 152
Kim, K., Dean, D., Wallace, J., Breithaupt, R., Mikos, A. G., & Fisher, J. P. (2011) · Biomaterials · doi:10.1016/j.biomaterials.2011.01.016 · Cited by 150
Reinforcement of Stereolithographic Resins for Rapid Prototyping with Cellulose Nanocrystals
Kumar, S., Hofmann, M., Steinmann, B., Foster, E. J., & Weder, C. (2012) · ACS Applied Materials & Interfaces · doi:10.1021/am301321v · Cited by 150
Mechanical properties of PA6/PA12 blend specimens prepared by selective laser sintering
Salmoria, G. V., Leite, J. L., Vieira, L. F., Pires, A. T. N., & Roesler, C. R. D. M. (2011) · Polymer Testing · doi:10.1016/j.polymertesting.2011.12.006 · Cited by 144
Micro‐Engineered 3D Scaffolds for Cell Culture Studies
Greiner, A. M., Richter, B., & Bastmeyer, M. (2012) · Macromolecular Bioscience · doi:10.1002/mabi.201200132 · Cited by 142
Kalsoom, U., Peristyy, A. A., Nesterenko, P. N., & Paull, B. (2016) · RSC Advances · doi:10.1039/c6ra05261d · Cited by 141
Jansen, J., Melchels, F. P. W., Grijpma, D. W., & Feijén, J. (2008) · Biomacromolecules · doi:10.1021/bm801001r · Cited by 136
Athreya, S. R., Kalaitzidou, K., & Das, S. (2010) · Composites Science and Technology · doi:10.1016/j.compscitech.2010.12.028 · Cited by 135
Matsuda, T., & Mizutani, M. (2002) · Journal of Biomedical Materials Research · doi:10.1002/jbm.10295 · Cited by 135
Development and validation of a 3D-printed interfacial stress sensor for prosthetic applications
Laszczak, P., Jiang, L., Bader, D. L., et al. (2014) · Medical Engineering & Physics · doi:10.1016/j.medengphy.2014.10.002 · Cited by 135
Spoerk, M., Savandaiah, C., Arbeiter, F. J., Sapkota, J., & Holzer, C. (2017) · Polymer Composites · doi:10.1002/pc.24701 · Cited by 133
Sillani, F., Kleijnen, R. G., Vetterli, M., Schmid, M., & Wegener, K. (2019) · Additive manufacturing · doi:10.1016/j.addma.2019.02.004 · Cited by 133
Elomaa, L., Pan, C., Shanjani, Y., Malkovskiy, A. V., Seppälä, J. V., & Yang, Y. (2015) · Journal of Materials Chemistry B · doi:10.1039/c5tb01468a · Cited by 131
Jiang, P., Yan, C., Guo, Y., Zhang, X., Cai, M., Jia, X., Wang, X., & Zhou, F. (2019) · Biomaterials Science · doi:10.1039/c9bm00081j · Cited by 131
Zhu, W., Yan, C., Shi, Y., Wen, S., Liu, J., & Shi, Y. (2015) · Materials & Design · doi:10.1016/j.matdes.2015.05.043 · Cited by 130
Self-citationZheng, H., Zhang, J., Lu, S., Gaochao, W., & Xu, Z. (2005) · Materials Letters · doi:10.1016/j.matlet.2005.11.003 · Cited by 129
Yuan, S., Bai, J., Chua, C., et al. (2016) · Polymers · doi:10.3390/polym8100370 · Cited by 126
Xu, Z., Wang, Y., Wu, D., Ananth, K. P., & Bai, J. (2019) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2019.07.014 · Cited by 126
Hong, Y., Wu, M., Chen, G., Dai, Z., Zhang, Y., Chen, G., & Dong, X. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b10464 · Cited by 123
Boparai, K. S., Singh, R., & Singh, H. (2015) · Virtual and Physical Prototyping · doi:10.1080/17452759.2015.1037402 · Cited by 122
Ouyang, Q., Guo, B., & Xu, J. (2018) · ACS Omega · doi:10.1021/acsomega.8b02549 · Cited by 122
Wu, J., Hui, C., Wu, Q., et al. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.12.037 · Cited by 119
Simulation of random packing of spherical particles with different size distributions
Shi, Y. S., & Zhang, Y. (2008) · Applied Physics A · doi:10.1007/s00339-008-4547-6 · Cited by 118
Two-Photon Polymerization Metrology: Characterization Methods of Mechanisms and Microstructures
LaFratta, C. N., & Baldacchini, T. (2017) · Micromachines · doi:10.3390/mi8040101 · Cited by 118
Photo-crosslinked synthetic biodegradable polymer networks for biomedical applications
van Bochove, B., & Grijpma, D. W. (2018) · Journal of Biomaterials Science Polymer Edition · doi:10.1080/09205063.2018.1553105 · Cited by 117
Yen, H., Tseng, C., Hsu, S., & Tsai, C. (2008) · Biomedical Microdevices · doi:10.1007/s10544-008-9271-7 · Cited by 116
Lee, J. W., Ahn, G., Kim, D. S., & Cho, D. (2008) · Microelectronic Engineering · doi:10.1016/j.mee.2008.12.038 · Cited by 115
Kumar, N., Jain, P. K., Tandon, P., & Pandey, P. M. (2018) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2018.08.013 · Cited by 113
In Situ Thermal Generation of Silver Nanoparticles in 3D Printed Polymeric Structures
Fantino, E., Chiappone, A., Calignano, F., Fontana, M., Pirri, C. F., & Roppolo, I. (2016) · Materials · doi:10.3390/ma9070589 · Cited by 111
Berretta, S., Evans, K., & Ghita, O. R. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.10.078 · Cited by 109
Gan, X., Wang, J., Wang, Z., Zheng, Z. Q., Lavorgna, M., Ronca, A., Fei, G., & Xia, H. (2019) · Materials & Design · doi:10.1016/j.matdes.2019.107874 · Cited by 109
Bai, J., Goodridge, R., Hague, R., et al. (2014) · Polymer Testing · doi:10.1016/j.polymertesting.2014.03.012 · Cited by 106
Yuan, S., Bai, J., Chua, C. K., et al. (2016) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2016.09.002 · Cited by 106
Bai, J., Goodridge, R., Hague, R., & Song, M. (2013) · Polymer Engineering and Science · doi:10.1002/pen.23459 · Cited by 105
Cited by
3D printing – A review of processes, materials and applications in industry 4.0
Jandyal, A., Chaturvedi, I., Wazir, I., Raina, A., & Ul Haq, M. I. (2022) · Sustainable Operations and Computers · doi:10.1016/j.susoc.2021.09.004 · Cited by 739
Kafle, A., Luis, E., Silwal, R., Pan, H. M., Shrestha, P. L., & Bastola, A. K. (2021) · Polymers · doi:10.3390/polym13183101 · Cited by 587
Alami, A. H., Ghani Olabi, A., Alashkar, A., Alasad, S., Aljaghoub, H., Rezk, H., & Abdelkareem, M. A. (2023) · Ain Shams Engineering Journal · doi:10.1016/j.asej.2023.102516 · Cited by 349
Design and advanced manufacturing of electromagnetic interference shielding materials
Liu, J., Yu, M.-Y., Yu, Z.-Z., & Nicolosi, V. (2023) · Materials Today · doi:10.1016/j.mattod.2023.03.022 · Cited by 332
Extrusion-based additive manufacturing technologies: State of the art and future perspectives
Altıparmak, S. C., Yardley, V. A., Shi, Z., & Lin, J. (2022) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2022.09.032 · Cited by 320
Metadata
- Authors
- Tan, L. J., Zhu, W., & Zhou, K.
- Venue
- Advanced Functional Materials
- Publisher
- Wiley
- Published
- 2020-08-06
- Volume
- 30
- Issue
- 43
- ISSN
- 1616-301X (ISSN-L)
- 1616-3028
- OpenAlex
- W3047352725
- Cited by
- 740
- References
- 302
- FWCI
- 34.23
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.