The DOI matches its Crossref record; 438 of the 438 references it cites were found in a registry or an index.
Current Status and Future Prospects of Metal–Sulfur Batteries
Open accessAbstract
Lithium–sulfur batteries are a major focus of academic and industrial energy‐storage research due to their high theoretical energy density and the use of low‐cost materials. The high energy density results from the conversion mechanism that lithium–sulfur cells utilize. The sulfur cathode, being naturally abundant and environmentally friendly, makes lithium–sulfur batteries a potential next‐generation energy‐storage technology. The current state of the research indicates that lithium–sulfur cells are now at the point of transitioning from laboratory‐scale devices to a more practical energy‐storage application. Based on similar electrochemical conversion reactions, the low‐cost sulfur cathode can be coupled with a wide range of metallic anodes, such as sodium, potassium, magnesium, calcium, and aluminum. These new “metal–sulfur” systems exhibit great potential in either lowering the production cost or producing high energy density. Inspired by the rapid development of lithium–sulfur batteries and the prospect of metal–sulfur cells, here, over 450 research articles are summarized to analyze the research progress and explore the electrochemical characteristics, cell‐assembly parameters, cell‐testing conditions, and materials design. In addition to highlighting the current research progress, the possible future areas of research which are needed to bring conversion‐type lithium–sulfur and other metal–sulfur batteries into the market are also discussed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Issues and challenges facing rechargeable lithium batteries
Tarascon, J.-M., & Armand, M. (2001) · Nature · doi:10.1038/35104644 · Cited by 21,130
Li-O2 and Li-S batteries with high energy storage
Bruce, P. G., Freunberger, S. A., Hardwick, L. J., & Tarascon, J.-M. (2012) · Nature Materials · doi:10.1038/nmat3191 · Cited by 9,479
Li-ion battery materials: present and future
Nitta, N., Wu, F., Lee, J. T., & Yushin, G. (2015) · Materials Today · doi:10.1016/j.mattod.2014.10.040 · Cited by 7,389
Toward Safe Lithium Metal Anode in Rechargeable Batteries: A Review
Cheng, X.-B., Zhang, R., Zhao, C.-Z., & Zhang, Q. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00115 · Cited by 6,197
30 Years of Lithium‐Ion Batteries
Li, M., Lu, J., Chen, Z., & Amine, K. (2018) · Advanced Materials · doi:10.1002/adma.201800561 · Cited by 6,039
A highly ordered nanostructured carbon–sulphur cathode for lithium–sulphur batteries
Ji, X., Lee, K. T., & Nazar, L. F. (2009) · Nature Materials · doi:10.1038/nmat2460 · Cited by 5,988
Lithium metal anodes for rechargeable batteries
Xu, W., Wang, J., Ding, F., Chen, X., Nasybulin, E., Zhang, Y., & Zhang, J.-G. (2014) · Energy Environ. Sci. · doi:10.1039/c3ee40795k · Cited by 4,704
Rechargeable Lithium–Sulfur Batteries
Manthiram, A., Fu, Y., Chung, S.-H., Zu, C., & Su, Y.-S. (2014) · Chemical Reviews · doi:10.1021/cr500062v · Cited by 4,665
Self-citationSlater, M. D., Kim, D., Lee, E., & Johnson, C. S. (2013) · Advanced Functional Materials · doi:10.1002/adfm.201200691 · Cited by 4,518
Lithium–Sulfur Batteries: Electrochemistry, Materials, and Prospects
Yin, Y., Xin, S., Guo, Y., & Wan, L. (2013) · Angewandte Chemie International Edition · doi:10.1002/anie.201304762 · Cited by 2,707
Challenges Facing Lithium Batteries and Electrical Double‐Layer Capacitors
Choi, N., Chen, Z., Freunberger, S. A., Ji, X., Sun, Y., Amine, K., Yushin, G., Nazar, L. F., Cho, J., & Bruce, P. G. (2012) · Angewandte Chemie International Edition · doi:10.1002/anie.201201429 · Cited by 2,700
Challenges and Prospects of Lithium–Sulfur Batteries
Manthiram, A., Fu, Y., & Su, Y.-S. (2013) · Accounts of Chemical Research · doi:10.1021/ar300179v · Cited by 2,380
Self-citationPrototype systems for rechargeable magnesium batteries
Aurbach, D., Lu, Z., Schechter, A., Gofer, Y., Gizbar, H., Turgeman, R., Cohen, Y., Moshkovich, M., & Levi, E. (2000) · Nature · doi:10.1038/35037553 · Cited by 2,355
A new class of Solvent-in-Salt electrolyte for high-energy rechargeable metallic lithium batteries
Suo, L., Hu, Y.-S., Li, H., Armand, M., & Chen, L. (2013) · Nature Communications · doi:10.1038/ncomms2513 · Cited by 2,314
Advances in lithium–sulfur batteries based on multifunctional cathodes and electrolytes
Pang, Q., Liang, X., Kwok, C. Y., & Nazar, L. F. (2016) · Nature Energy · doi:10.1038/nenergy.2016.132 · Cited by 2,167
Polysulfide Shuttle Study in the Li/S Battery System
Mikhaylik, Y. V., & Akridge, J. R. (2004) · Journal of The Electrochemical Society · doi:10.1149/1.1806394 · Cited by 2,115
Ji, X., & Nazar, L. F. (2010) · Journal of Materials Chemistry · doi:10.1039/b925751a · Cited by 1,967
Porous Hollow Carbon@Sulfur Composites for High‐Power Lithium–Sulfur Batteries
Jayaprakash, N., Shen, J., Moganty, S. S., Corona, A., & Archer, L. A. (2011) · Angewandte Chemie International Edition · doi:10.1002/anie.201100637 · Cited by 1,811
More Reliable Lithium‐Sulfur Batteries: Status, Solutions and Prospects
Fang, R., Zhao, S., Sun, Z., Wang, D., Cheng, H., & Li, F. (2017) · Advanced Materials · doi:10.1002/adma.201606823 · Cited by 1,785
Design principles for electrolytes and interfaces for stable lithium-metal batteries
Tikekar, M. D., Choudhury, S., Tu, Z., & Archer, L. A. (2016) · Nature Energy · doi:10.1038/nenergy.2016.114 · Cited by 1,765
Review on High‐Loading and High‐Energy Lithium–Sulfur Batteries
Peng, H., Huang, J., Cheng, X., & Zhang, Q. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201700260 · Cited by 1,746
Smaller Sulfur Molecules Promise Better Lithium–Sulfur Batteries
Xin, S., Gu, L., Zhao, N.-H., Yin, Y.-X., Zhou, L.-J., Guo, Y.-G., & Wan, L.-J. (2012) · Journal of the American Chemical Society · doi:10.1021/ja308170k · Cited by 1,644
Lithium–Sulfur Batteries: Progress and Prospects
Manthiram, A., Chung, S., & Zu, C. (2015) · Advanced Materials · doi:10.1002/adma.201405115 · Cited by 1,620
Self-citationLiquid electrolyte lithium/sulfur battery: Fundamental chemistry, problems, and solutions
Zhang, S. S. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.12.102 · Cited by 1,592
Graphene Oxide as a Sulfur Immobilizer in High Performance Lithium/Sulfur Cells
Ji, L., Rao, M., Zheng, H., Zhang, L., Li, Y., Duan, W., Guo, J., Cairns, E. J., & Zhang, Y. (2011) · Journal of the American Chemical Society · doi:10.1021/ja206955k · Cited by 1,505
Lithium–sulphur batteries with a microporous carbon paper as a bifunctional interlayer
Su, Y.-S., & Manthiram, A. (2012) · Nature Communications · doi:10.1038/ncomms2163 · Cited by 1,458
Self-citationPowering Lithium–Sulfur Battery Performance by Propelling Polysulfide Redox at Sulfiphilic Hosts
Yuan, Z., Peng, H.-J., Hou, T.-Z., Huang, J.-Q., Chen, C.-M., Wang, D.-W., Cheng, X.-B., Wei, F., & Zhang, Q. (2016) · Nano Letters · doi:10.1021/acs.nanolett.5b04166 · Cited by 1,438
Mg rechargeable batteries: an on-going challenge
Yoo, H. D., Shterenberg, I., Gofer, Y., Gershinsky, G., Pour, N., & Aurbach, D. (2013) · Energy & Environmental Science · doi:10.1039/c3ee40871j · Cited by 1,398
High-voltage positive electrode materials for lithium-ion batteries
Li, W., Song, B., & Manthiram, A. (2017) · Chemical Society Reviews · doi:10.1039/c6cs00875e · Cited by 1,339
Self-citationMetal–organic framework-based separator for lithium–sulfur batteries
Bai, S., Liu, X., Zhu, K., Wu, S., & Zhou, H. (2016) · Nature Energy · doi:10.1038/nenergy.2016.94 · Cited by 1,333
Pang, Q., Kundu, D., Cuisinier, M., & Nazar, L. F. (2014) · Nature Communications · doi:10.1038/ncomms5759 · Cited by 1,318
Zheng, G., Yang, Y., Cha, J. J., Hong, S. S., & Cui, Y. (2011) · Nano Letters · doi:10.1021/nl2027684 · Cited by 1,295
Zhang, B., Qin, X., Li, G. R., & Gao, X. P. (2010) · Energy & Environmental Science · doi:10.1039/c002639e · Cited by 1,280
Sulfur-Impregnated Disordered Carbon Nanotubes Cathode for Lithium–Sulfur Batteries
Guo, J., Xu, Y., & Wang, C. (2011) · Nano Letters · doi:10.1021/nl202297p · Cited by 1,278
Sulfur Cathodes Based on Conductive MXene Nanosheets for High‐Performance Lithium–Sulfur Batteries
Liang, X., Garsuch, A., & Nazar, L. F. (2015) · Angewandte Chemie International Edition · doi:10.1002/anie.201410174 · Cited by 1,201
Spherical Ordered Mesoporous Carbon Nanoparticles with High Porosity for Lithium–Sulfur Batteries
Schuster, J., He, G., Mandlmeier, B., Yim, T., Lee, K. T., Bein, T., & Nazar, L. F. (2012) · Angewandte Chemie International Edition · doi:10.1002/anie.201107817 · Cited by 1,114
Lithium sulfur batteries, a mechanistic review
Wild, M., O'Neill, L., Zhang, T., Purkayastha, R., Minton, G., Marinescu, M., & Offer, G. J. (2015) · Energy & Environmental Science · doi:10.1039/c5ee01388g · Cited by 1,107
Wang, Z., Dong, Y., Li, H., Zhao, Z., Bin Wu, H., Hao, C., Liu, S., Qiu, J., & Lou, X. W. (2014) · Nature Communications · doi:10.1038/ncomms6002 · Cited by 1,059
Zhou, G., Paek, E., Hwang, G. S., & Manthiram, A. (2015) · Nature Communications · doi:10.1038/ncomms8760 · Cited by 1,058
Self-citationZhou, T., Lv, W., Li, J., Zhou, G., Zhao, Y., Fan, S., Liu, B., Li, B., Kang, F., & Yang, Q.-H. (2017) · Energy & Environmental Science · doi:10.1039/c7ee01430a · Cited by 1,056
Xiao, L., Cao, Y., Xiao, J., Schwenzer, B., Engelhard, M. H., Saraf, L. V., Nie, Z., Exarhos, G. J., & Liu, J. (2012) · Advanced Materials · doi:10.1002/adma.201103392 · Cited by 1,016
A Graphene–Pure‐Sulfur Sandwich Structure for Ultrafast, Long‐Life Lithium–Sulfur Batteries
Zhou, G., Pei, S., Li, L., Wang, D., Wang, S., Huang, K., Yin, L., Li, F., & Cheng, H. (2014) · Advanced Materials · doi:10.1002/adma.201302877 · Cited by 997
Song, J., Xu, T., Gordin, M. L., Zhu, P., Lv, D., Jiang, Y., Chen, Y., Duan, Y., & Wang, D. (2014) · Advanced Functional Materials · doi:10.1002/adfm.201302631 · Cited by 978
Liu, D., Zhang, C., Zhou, G., Lv, W., Ling, G., Zhi, L., & Yang, Q. (2018) · Advanced Science · doi:10.1002/advs.201700270 · Cited by 956
Lin, H., Yang, L., Jiang, X., Li, G., Zhang, T., Yao, Q., Zheng, G. W., & Lee, J. Y. (2017) · Energy & Environmental Science · doi:10.1039/c7ee01047h · Cited by 952
Role of LiNO3 in rechargeable lithium/sulfur battery
Zhang, S. S. (2012) · Electrochimica Acta · doi:10.1016/j.electacta.2012.03.081 · Cited by 947
Barchasz, C., Molton, F., Duboc, C., Leprêtre, J.-C., Patoux, S., & Alloin, F. (2012) · Analytical Chemistry · doi:10.1021/ac2032244 · Cited by 946
Elazari, R., Salitra, G., Garsuch, A., Panchenko, A., & Aurbach, D. (2011) · Advanced Materials · doi:10.1002/adma.201103274 · Cited by 895
An Overview and Future Perspectives of Aluminum Batteries
Elia, G. A., Marquardt, K., Hoeppner, K., Fantini, S., Lin, R., Knipping, E., Peters, W., Drillet, J., Passerini, S., & Hahn, R. (2016) · Advanced Materials · doi:10.1002/adma.201601357 · Cited by 890
Improving the Performance of Lithium–Sulfur Batteries by Conductive Polymer Coating
Yang, Y., Yu, G., Cha, J. J., Wu, H., Vosgueritchian, M., Yao, Y., Bao, Z., & Cui, Y. (2011) · ACS Nano · doi:10.1021/nn203436j · Cited by 866
Stabilizing lithium–sulphur cathodes using polysulphide reservoirs
Ji, X., Evers, S., Black, R., & Nazar, L. F. (2011) · Nature Communications · doi:10.1038/ncomms1293 · Cited by 864
Li, Z., Zhang, J., & Lou, X. W. (. (2015) · Angewandte Chemie International Edition · doi:10.1002/anie.201506972 · Cited by 841
Carbon–sulfur composites for Li–S batteries: status and prospects
Wang, D.-W., Zeng, Q., Zhou, G., Yin, L., Li, F., Cheng, H.-M., Gentle, I. R., & Lu, G. Q. M. (2013) · Journal of Materials Chemistry A · doi:10.1039/c3ta11045a · Cited by 816
Next-Generation Lithium Metal Anode Engineering via Atomic Layer Deposition
Kozen, A. C., Lin, C.-F., Pearse, A. J., Schroeder, M. A., Han, X., Hu, L., Lee, S.-B., Rubloff, G. W., & Noked, M. (2015) · ACS Nano · doi:10.1021/acsnano.5b02166 · Cited by 816
Huang, J.-Q., Zhuang, T.-Z., Zhang, Q., Peng, H.-J., Chen, C.-M., & Wei, F. (2015) · ACS Nano · doi:10.1021/nn507178a · Cited by 809
Li, G., Sun, J., Hou, W., Jiang, S., Huang, Y., & Geng, J. (2016) · Nature Communications · doi:10.1038/ncomms10601 · Cited by 806
Confining Sulfur in Double‐Shelled Hollow Carbon Spheres for Lithium–Sulfur Batteries
Zhang, C., Wu, H. B., Yuan, C., Guo, Z., & Lou, X. W. (. (2012) · Angewandte Chemie International Edition · doi:10.1002/anie.201205292 · Cited by 800
Towards a calcium-based rechargeable battery
Ponrouch, A., Frontera, C., Bardé, F., & Palacín, M. R. (2016) · Nature Materials · doi:10.1038/nmat4462 · Cited by 794
Hou, T.-Z., Chen, X., Peng, H.-J., Huang, J.-Q., Li, B.-Q., Zhang, Q., & Li, B. (2016) · Small · doi:10.1002/smll.201600809 · Cited by 789
Yolk–Shell Structure of Polyaniline-Coated Sulfur for Lithium–Sulfur Batteries
Zhou, W., Yu, Y., Chen, H., DiSalvo, F. J., & Abruña, H. D. (2013) · Journal of the American Chemical Society · doi:10.1021/ja409508q · Cited by 782
Pang, Q., Tang, J., Huang, H., Liang, X., Hart, C., Tam, K. C., & Nazar, L. F. (2015) · Advanced Materials · doi:10.1002/adma.201502467 · Cited by 780
Song, J., Gordin, M. L., Xu, T., Chen, S., Yu, Z., Sohn, H., Lu, J., Ren, Y., Duan, Y., & Wang, D. (2015) · Angewandte Chemie International Edition · doi:10.1002/anie.201411109 · Cited by 776
High temperature sodium batteries: status, challenges and future trends
Hueso, K. B., Armand, M., & Rojo, T. (2013) · Energy & Environmental Science · doi:10.1039/c3ee24086j · Cited by 774
2D MoS2 as an efficient protective layer for lithium metal anodes in high-performance Li–S batteries
Cha, E., Patel, M. D., Park, J., Hwang, J., Prasad, V., Cho, K., & Choi, W. (2018) · Nature Nanotechnology · doi:10.1038/s41565-018-0061-y · Cited by 767
Fibrous Hybrid of Graphene and Sulfur Nanocrystals for High-Performance Lithium–Sulfur Batteries
Zhou, G., Yin, L.-C., Wang, D.-W., Li, L., Pei, S., Gentle, I. R., Li, F., & Cheng, H.-M. (2013) · ACS Nano · doi:10.1021/nn401228t · Cited by 761
Interwoven MXene Nanosheet/Carbon‐Nanotube Composites as Li–S Cathode Hosts
Liang, X., Rangom, Y., Kwok, C. Y., Pang, Q., & Nazar, L. F. (2017) · Advanced Materials · doi:10.1002/adma.201603040 · Cited by 759
Su, Y.-S., & Manthiram, A. (2012) · Chemical Communications · doi:10.1039/c2cc33945e · Cited by 755
Self-citationElectrocatalytic Polysulfide Traps for Controlling Redox Shuttle Process of Li–S Batteries
Al Salem, H., Babu, G., V. Rao, C., & Arava, L. M. R. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b04472 · Cited by 753
Bao, W., Liu, L., Wang, C., Choi, S., Wang, D., & Wang, G. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201702485 · Cited by 745
High-Rate, Ultralong Cycle-Life Lithium/Sulfur Batteries Enabled by Nitrogen-Doped Graphene
Qiu, Y., Li, W., Zhao, W., Li, G., Hou, Y., Liu, M., Zhou, L., Ye, F., Li, H., Wei, Z., et al. (2014) · Nano Letters · doi:10.1021/nl5020475 · Cited by 738
Fluorinated Ethylene Carbonate as Electrolyte Additive for Rechargeable Na Batteries
Komaba, S., Ishikawa, T., Yabuuchi, N., Murata, W., Ito, A., & Ohsawa, Y. (2011) · ACS Applied Materials & Interfaces · doi:10.1021/am200973k · Cited by 713
Revisiting the Role of Polysulfides in Lithium–Sulfur Batteries
Li, G., Wang, S., Zhang, Y., Li, M., Chen, Z., & Lu, J. (2018) · Advanced Materials · doi:10.1002/adma.201705590 · Cited by 711
Tao, X., Wang, J., Ying, Z., Cai, Q., Zheng, G., Gan, Y., Huang, H., Xia, Y., Liang, C., Zhang, W., et al. (2014) · Nano Letters · doi:10.1021/nl502331f · Cited by 687
A review of flexible lithium–sulfur and analogous alkali metal–chalcogen rechargeable batteries
Peng, H.-J., Huang, J.-Q., & Zhang, Q. (2017) · Chemical Society Reviews · doi:10.1039/c7cs00139h · Cited by 680
Ionic shield for polysulfides towards highly-stable lithium–sulfur batteries
Huang, J.-Q., Zhang, Q., Peng, H.-J., Liu, X.-Y., Qian, W.-Z., & Wei, F. (2014) · Energy Environ. Sci. · doi:10.1039/c3ee42223b · Cited by 679
Deng, Z., Zhang, Z., Lai, Y., Liu, J., Li, J., & Liu, Y. (2013) · Journal of The Electrochemical Society · doi:10.1149/2.026304jes · Cited by 674
Electrolyte roadblocks to a magnesium rechargeable battery
Muldoon, J., Bucur, C. B., Oliver, A. G., Sugimoto, T., Matsui, M., Kim, H. S., Allred, G. D., Zajicek, J., & Kotani, Y. (2012) · Energy & Environmental Science · doi:10.1039/c2ee03029b · Cited by 667
Huang, J.-Q., Zhang, Q., & Wei, F. (2015) · Energy Storage Materials · doi:10.1016/j.ensm.2015.09.008 · Cited by 665
Unstacked double-layer templated graphene for high-rate lithium–sulphur batteries
Zhao, M.-Q., Zhang, Q., Huang, J.-Q., Tian, G.-L., Nie, J.-Q., Peng, H.-J., & Wei, F. (2014) · Nature Communications · doi:10.1038/ncomms4410 · Cited by 664
Recent Progress in Rechargeable Potassium Batteries
Hwang, J., Myung, S., & Sun, Y. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201802938 · Cited by 651
Structure and compatibility of a magnesium electrolyte with a sulphur cathode
Kim, H. S., Arthur, T. S., Allred, G. D., Zajicek, J., Newman, J. G., Rodnyansky, A. E., Oliver, A. G., Boggess, W. C., & Muldoon, J. (2011) · Nature Communications · doi:10.1038/ncomms1435 · Cited by 649
Enhanced Electrochemical Kinetics on Conductive Polar Mediators for Lithium–Sulfur Batteries
Peng, H., Zhang, G., Chen, X., Zhang, Z., Xu, W., Huang, J., & Zhang, Q. (2016) · Angewandte Chemie International Edition · doi:10.1002/anie.201605676 · Cited by 649
Emerging Non-Aqueous Potassium-Ion Batteries: Challenges and Opportunities
Wu, X., Leonard, D. P., & Ji, X. (2017) · Chemistry of Materials · doi:10.1021/acs.chemmater.7b01764 · Cited by 649
Rechargeable magnesium battery: Current status and key challenges for the future
Saha, P., Datta, M. K., Velikokhatnyi, O. I., Manivannan, A., Alman, D., & Kumta, P. N. (2014) · Progress in Materials Science · doi:10.1016/j.pmatsci.2014.04.001 · Cited by 649
Hagen, M., Hanselmann, D., Ahlbrecht, K., Maça, R., Gerber, D., & Tübke, J. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201401986 · Cited by 636
A High‐Energy Room‐Temperature Sodium‐Sulfur Battery
Xin, S., Yin, Y., Guo, Y., & Wan, L. (2014) · Advanced Materials · doi:10.1002/adma.201304126 · Cited by 632
A perspective on nickel-rich layered oxide cathodes for lithium-ion batteries
Manthiram, A., Song, B., & Li, W. (2017) · Energy Storage Materials · doi:10.1016/j.ensm.2016.10.007 · Cited by 628
Self-citationYuan, H., Peng, H., Li, B., Xie, J., Kong, L., Zhao, M., Chen, X., Huang, J., & Zhang, Q. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201802768 · Cited by 626
The Regulating Role of Carbon Nanotubes and Graphene in Lithium‐Ion and Lithium–Sulfur Batteries
Fang, R., Chen, K., Yin, L., Sun, Z., Li, F., & Cheng, H. (2019) · Advanced Materials · doi:10.1002/adma.201800863 · Cited by 617
Recent Advances in Electrolytes for Lithium–Sulfur Batteries
Zhang, S., Ueno, K., Dokko, K., & Watanabe, M. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201500117 · Cited by 616
Mesoporous Titanium Nitride‐Enabled Highly Stable Lithium‐Sulfur Batteries
Cui, Z., Zu, C., Zhou, W., Manthiram, A., & Goodenough, J. B. (2016) · Advanced Materials · doi:10.1002/adma.201601382 · Cited by 611
Self-citationGao, J., Lowe, M. A., Kiya, Y., & Abruña, H. D. (2011) · The Journal of Physical Chemistry C · doi:10.1021/jp207714c · Cited by 600
Lithium salts for advanced lithium batteries: Li–metal, Li–O2, and Li–S
Younesi, R., Veith, G. M., Johansson, P., Edström, K., & Vegge, T. (2015) · Energy & Environmental Science · doi:10.1039/c5ee01215e · Cited by 600
A novel synergistic composite with multi-functional effects for high-performance Li–S batteries
Li, Y.-J., Fan, J.-M., Zheng, M.-S., & Dong, Q.-F. (2016) · Energy & Environmental Science · doi:10.1039/c6ee00104a · Cited by 600
Carbon materials for Li–S batteries: Functional evolution and performance improvement
Liang, J., Sun, Z.-H., Li, F., & Cheng, H.-M. (2016) · Energy Storage Materials · doi:10.1016/j.ensm.2015.09.007 · Cited by 593
A Lithium/Dissolved Sulfur Battery with an Organic Electrolyte
Rauh, R. D., Abraham, K. M., Pearson, G. F., Surprenant, J. K., & Brummer, S. B. (1979) · Journal of The Electrochemical Society · doi:10.1149/1.2129079 · Cited by 592
A Flexible Sulfur‐Graphene‐Polypropylene Separator Integrated Electrode for Advanced Li–S Batteries
Zhou, G., Li, L., Wang, D., Shan, X., Pei, S., Li, F., & Cheng, H. (2015) · Advanced Materials · doi:10.1002/adma.201404210 · Cited by 590
A stable room-temperature sodium–sulfur battery
Wei, S., Xu, S., Agrawral, A., Choudhury, S., Lu, Y., Tu, Z., Ma, L., & Archer, L. A. (2016) · Nature Communications · doi:10.1038/ncomms11722 · Cited by 589
Tang, C., Zhang, Q., Zhao, M., Huang, J., Cheng, X., Tian, G., Peng, H., & Wei, F. (2014) · Advanced Materials · doi:10.1002/adma.201401243 · Cited by 586
A Cooperative Interface for Highly Efficient Lithium–Sulfur Batteries
Peng, H., Zhang, Z., Huang, J., Zhang, G., Xie, J., Xu, W., Shi, J., Chen, X., Cheng, X., & Zhang, Q. (2016) · Advanced Materials · doi:10.1002/adma.201603401 · Cited by 583
Metal–Sulfur Battery Cathodes Based on PAN–Sulfur Composites
Wei, S., Ma, L., Hendrickson, K. E., Tu, Z., & Archer, L. A. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b08113 · Cited by 579
Lithium Bond Chemistry in Lithium–Sulfur Batteries
Hou, T., Xu, W., Chen, X., Peng, H., Huang, J., & Zhang, Q. (2017) · Angewandte Chemie International Edition · doi:10.1002/anie.201704324 · Cited by 574
A graphene foam electrode with high sulfur loading for flexible and high energy Li-S batteries
Zhou, G., Li, L., Ma, C., Wang, S., Shi, Y., Koratkar, N., Ren, W., Li, F., & Cheng, H.-M. (2015) · Nano Energy · doi:10.1016/j.nanoen.2014.11.025 · Cited by 570
He, J., Chen, Y., & Manthiram, A. (2018) · Energy & Environmental Science · doi:10.1039/c8ee00893k · Cited by 565
Self-citationA room-temperature sodium–sulfur battery with high capacity and stable cycling performance
Xu, X., Zhou, D., Qin, X., Lin, K., Kang, F., Li, B., Shanmukaraj, D., Rojo, T., Armand, M., & Wang, G. (2018) · Nature Communications · doi:10.1038/s41467-018-06443-3 · Cited by 563
Song, J., Yu, Z., Gordin, M. L., & Wang, D. (2016) · Nano Letters · doi:10.1021/acs.nanolett.5b03217 · Cited by 561
Zhang, J., Hu, H., Li, Z., & Lou, X. W. (. (2016) · Angewandte Chemie International Edition · doi:10.1002/anie.201511632 · Cited by 560
Pei, F., An, T., Zang, J., Zhao, X., Fang, X., Zheng, M., Dong, Q., & Zheng, N. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201502539 · Cited by 555
High Energy Density Lithium–Sulfur Batteries: Challenges of Thick Sulfur Cathodes
Lv, D., Zheng, J., Li, Q., Xie, X., Ferrara, S., Nie, Z., Mehdi, L. B., Browning, N. D., Zhang, J., Graff, G. L., et al. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201402290 · Cited by 554
Rechargeable Lithium Sulfur Battery
Cheon, S.-E., Ko, K.-S., Cho, J.-H., Kim, S.-W., Chin, E.-Y., & Kim, H.-T. (2003) · Journal of The Electrochemical Society · doi:10.1149/1.1571532 · Cited by 553
Zhao, M.-Q., Liu, X.-F., Zhang, Q., Tian, G.-L., Huang, J.-Q., Zhu, W., & Wei, F. (2012) · ACS Nano · doi:10.1021/nn304037d · Cited by 553
Peng, H., Huang, J., Zhao, M., Zhang, Q., Cheng, X., Liu, X., Qian, W., & Wei, F. (2014) · Advanced Functional Materials · doi:10.1002/adfm.201303296 · Cited by 552
Multi‐Functional Layered WS2 Nanosheets for Enhancing the Performance of Lithium–Sulfur Batteries
Lei, T., Chen, W., Huang, J., Yan, C., Sun, H., Wang, C., Zhang, W., Li, Y., & Xiong, J. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201601843 · Cited by 548
Song, Y., Zhao, W., Kong, L., Zhang, L., Zhu, X., Shao, Y., Ding, F., Zhang, Q., Sun, J., & Liu, Z. (2018) · Energy & Environmental Science · doi:10.1039/c8ee01402g · Cited by 539
Hu, G., Xu, C., Sun, Z., Wang, S., Cheng, H., Li, F., & Ren, W. (2016) · Advanced Materials · doi:10.1002/adma.201504765 · Cited by 532
3D Interconnected Electrode Materials with Ultrahigh Areal Sulfur Loading for Li–S Batteries
Fang, R., Zhao, S., Hou, P., Cheng, M., Wang, S., Cheng, H., Liu, C., & Li, F. (2016) · Advanced Materials · doi:10.1002/adma.201506014 · Cited by 532
Li, G., Li, G., Ye, S., & Gao, X. (2012) · Advanced Energy Materials · doi:10.1002/aenm.201200017 · Cited by 528
Pie-like electrode design for high-energy density lithium–sulfur batteries
Li, Z., Zhang, J. T., Chen, Y. M., Li, J., & Lou, X. W. (2015) · Nature Communications · doi:10.1038/ncomms9850 · Cited by 524
Implantable Solid Electrolyte Interphase in Lithium-Metal Batteries
Cheng, X.-B., Yan, C., Chen, X., Guan, C., Huang, J.-Q., Peng, H.-J., Zhang, R., Yang, S.-T., & Zhang, Q. (2017) · Chem · doi:10.1016/j.chempr.2017.01.003 · Cited by 524
He, J., Luo, L., Chen, Y., & Manthiram, A. (2017) · Advanced Materials · doi:10.1002/adma.201702707 · Cited by 521
Self-citationWu, F., Chen, J., Chen, R., Wu, S., Li, L., Chen, S., & Zhao, T. (2011) · The Journal of Physical Chemistry C · doi:10.1021/jp1114724 · Cited by 520
Zhou, G., Wang, D.-W., Li, F., Hou, P.-X., Yin, L., Liu, C., Lu, G. Q. (., Gentle, I. R., & Cheng, H.-M. (2012) · Energy & Environmental Science · doi:10.1039/c2ee22294a · Cited by 518
Mao, Y., Li, G., Guo, Y., Li, Z., Liang, C., Peng, X., & Lin, Z. (2017) · Nature Communications · doi:10.1038/ncomms14628 · Cited by 518
Chung, S., & Manthiram, A. (2014) · Advanced Functional Materials · doi:10.1002/adfm.201400845 · Cited by 516
Self-citationEntrapment of Polysulfides by a Black‐Phosphorus‐Modified Separator for Lithium–Sulfur Batteries
Sun, J., Sun, Y., Pasta, M., Zhou, G., Li, Y., Liu, W., Xiong, F., & Cui, Y. (2016) · Advanced Materials · doi:10.1002/adma.201602172 · Cited by 516
Recent progress and remaining challenges in sulfur-based lithium secondary batteries – a review
Bresser, D., Passerini, S., & Scrosati, B. (2013) · Chemical Communications · doi:10.1039/c3cc46131a · Cited by 514
Emerging Nonaqueous Aluminum‐Ion Batteries: Challenges, Status, and Perspectives
Zhang, Y., Liu, S., Ji, Y., Ma, J., & Yu, H. (2018) · Advanced Materials · doi:10.1002/adma.201706310 · Cited by 504
Zhou, G., Zhao, Y., & Manthiram, A. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201402263 · Cited by 502
Self-citationAnodes for Rechargeable Lithium‐Sulfur Batteries
Cao, R., Xu, W., Lv, D., Xiao, J., & Zhang, J. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201402273 · Cited by 502
Structural Design of Cathodes for Li‐S Batteries
Pope, M. A., & Aksay, I. A. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201500124 · Cited by 500
Yin, L., Wang, J., Lin, F., Yang, J., & Nuli, Y. (2012) · Energy & Environmental Science · doi:10.1039/c2ee03495f · Cited by 484
From lithium to sodium: Cell chemistry of room temperature sodium–air and sodium–sulfur batteries
Adelhelm, P., Hartmann, P., Bender, C. L., Busche, M., Eufinger, C., & Janek, J. (2015) · Beilstein Journal of Nanotechnology · doi:10.3762/bjnano.6.105 · Cited by 478
Progress on the Critical Parameters for Lithium–Sulfur Batteries to be Practically Viable
Chung, S., Chang, C., & Manthiram, A. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201801188 · Cited by 477
Self-citationTailoring Porosity in Carbon Nanospheres for Lithium–Sulfur Battery Cathodes
He, G., Evers, S., Liang, X., Cuisinier, M., Garsuch, A., & Nazar, L. F. (2013) · ACS Nano · doi:10.1021/nn404439r · Cited by 475
Ha, S.-Y., Lee, Y.-W., Woo, S. W., Koo, B., Kim, J.-S., Cho, J., Lee, K. T., & Choi, N.-S. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am405619v · Cited by 474
Zhang, Z., Kong, L., Liu, S., Li, G., & Gao, X. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201602543 · Cited by 472
Lithium Sulfur Battery: Oxidation/Reduction Mechanisms of Polysulfides in THF Solutions
Yamin, H., Gorenshtein, A., Penciner, J., Sternberg, Y., & Peled, E. (1988) · Journal of The Electrochemical Society · doi:10.1149/1.2095868 · Cited by 471
Highly Conductive PEO-like Polymer Electrolytes
Abraham, K. M., Jiang, Z., & Carroll, B. (1997) · Chemistry of Materials · doi:10.1021/cm970075a · Cited by 461
Surface Chemistry in Cobalt Phosphide-Stabilized Lithium–Sulfur Batteries
Zhong, Y., Yin, L., He, P., Liu, W., Wu, Z., & Wang, H. (2018) · Journal of the American Chemical Society · doi:10.1021/jacs.7b11434 · Cited by 458
Optimization of mesoporous carbon structures for lithium–sulfur battery applications
Li, X., Cao, Y., Qi, W., Saraf, L. V., Xiao, J., Nie, Z., Mietek, J., Zhang, J.-G., Schwenzer, B., & Liu, J. (2011) · Journal of Materials Chemistry · doi:10.1039/c1jm12979a · Cited by 454
A new class of non-corrosive, highly efficient electrolytes for rechargeable magnesium batteries
Zhao-Karger, Z., Gil Bardaji, M. E., Fuhr, O., & Fichtner, M. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta02237a · Cited by 451
Dong, Y., Zheng, S., Qin, J., Zhao, X., Shi, H., Wang, X., Chen, J., & Wu, Z.-S. (2018) · ACS Nano · doi:10.1021/acsnano.7b07672 · Cited by 446
Chen, X., Hou, T., Persson, K. A., & Zhang, Q. (2019) · Materials Today · doi:10.1016/j.mattod.2018.04.007 · Cited by 446
A Two-Dimensional Porous Carbon-Modified Separator for High-Energy-Density Li-S Batteries
Pei, F., Lin, L., Fu, A., Mo, S., Ou, D., Fang, X., & Zheng, N. (2018) · Joule · doi:10.1016/j.joule.2017.12.003 · Cited by 442
Hwang, T. H., Jung, D. S., Kim, J.-S., Kim, B. G., & Choi, J. W. (2013) · Nano Letters · doi:10.1021/nl402513x · Cited by 441
Evers, S., & Nazar, L. F. (2011) · Chemical Communications · doi:10.1039/c2cc16726c · Cited by 441
Recent advances in lithium–sulfur batteries
Chen, L., & Shaw, L. L. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.05.111 · Cited by 432
A review of electrolytes for lithium–sulphur batteries
Scheers, J., Fantini, S., & Johansson, P. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.01.023 · Cited by 429
Zhong, Y., Chao, D., Deng, S., Zhan, J., Fang, R., Xia, Y., Wang, Y., Wang, X., Xia, X., & Tu, J. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201706391 · Cited by 428
Rechargeable Lithium Sulfur Battery
Cheon, S.-E., Ko, K.-S., Cho, J.-H., Kim, S.-W., Chin, E.-Y., & Kim, H.-T. (2003) · Journal of The Electrochemical Society · doi:10.1149/1.1571533 · Cited by 424
A graphene-like metallic cathode host for long-life and high-loading lithium–sulfur batteries
Pang, Q., Kundu, D., & Nazar, L. F. (2016) · Materials Horizons · doi:10.1039/c5mh00246j · Cited by 424
Zhang, J., Yang, C., Yin, Y., Wan, L., & Guo, Y. (2016) · Advanced Materials · doi:10.1002/adma.201602913 · Cited by 418
Carbon Materials for Lithium Sulfur Batteries—Ten Critical Questions
Borchardt, L., Oschatz, M., & Kaskel, S. (2016) · Chemistry – A European Journal · doi:10.1002/chem.201600040 · Cited by 414
Zhang, B.-W., Sheng, T., Liu, Y.-D., Wang, Y.-X., Zhang, L., Lai, W.-H., Wang, L., Yang, J., Gu, Q.-F., Chou, S.-L., et al. (2018) · Nature Communications · doi:10.1038/s41467-018-06144-x · Cited by 414
Yin, L.-C., Liang, J., Zhou, G.-M., Li, F., Saito, R., & Cheng, H.-M. (2016) · Nano Energy · doi:10.1016/j.nanoen.2016.04.053 · Cited by 412
Advances in Polar Materials for Lithium–Sulfur Batteries
Wang, H., Zhang, W., Xu, J., & Guo, Z. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201707520 · Cited by 412
Pang, Q., & Nazar, L. F. (2016) · ACS Nano · doi:10.1021/acsnano.5b07347 · Cited by 411
Structural Design of Lithium–Sulfur Batteries: From Fundamental Research to Practical Application
Yang, X., Li, X., Adair, K., Zhang, H., & Sun, X. (2018) · Electrochemical Energy Reviews · doi:10.1007/s41918-018-0010-3 · Cited by 411
Progress Towards Commercially Viable Li–S Battery Cells
Urbonaite, S., Poux, T., & Novák, P. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201500118 · Cited by 406
Liu, S., Li, J., Yan, X., Su, Q., Lu, Y., Qiu, J., Wang, Z., Lin, X., Huang, J., Liu, R., et al. (2018) · Advanced Materials · doi:10.1002/adma.201706895 · Cited by 404
Cheng, X.-B., Huang, J.-Q., Zhang, Q., Peng, H.-J., Zhao, M.-Q., & Wei, F. (2014) · Nano Energy · doi:10.1016/j.nanoen.2013.12.013 · Cited by 403
Chen, R., Zhao, T., Lu, J., Wu, F., Li, L., Chen, J., Tan, G., Ye, Y., & Amine, K. (2013) · Nano Letters · doi:10.1021/nl4016683 · Cited by 401
Yao, H., Zheng, G., Hsu, P.-C., Kong, D., Cha, J. J., Li, W., Seh, Z. W., McDowell, M. T., Yan, K., Liang, Z., et al. (2014) · Nature Communications · doi:10.1038/ncomms4943 · Cited by 398
Nanostructured Anode Material for High‐Power Battery System in Electric Vehicles
Amine, K., Belharouak, I., Chen, Z., Tran, T., Yumoto, H., Ota, N., Myung, S., & Sun, Y. (2010) · Advanced Materials · doi:10.1002/adma.201000441 · Cited by 396
Yang, X., Zhang, L., Zhang, F., Huang, Y., & Chen, Y. (2014) · ACS Nano · doi:10.1021/nn501284q · Cited by 396
Cheng, X.-B., Yan, C., Huang, J.-Q., Li, P., Zhu, L., Zhao, L., Zhang, Y., Zhu, W., Yang, S.-T., & Zhang, Q. (2017) · Energy Storage Materials · doi:10.1016/j.ensm.2016.09.003 · Cited by 394
High-Performance Li–S Batteries with an Ultra-lightweight MWCNT-Coated Separator
Chung, S.-H., & Manthiram, A. (2014) · The Journal of Physical Chemistry Letters · doi:10.1021/jz5006913 · Cited by 393
Self-citationTang, C., Li, B., Zhang, Q., Zhu, L., Wang, H., Shi, J., & Wei, F. (2016) · Advanced Functional Materials · doi:10.1002/adfm.201503726 · Cited by 388
Chen, W., Qian, T., Xiong, J., Xu, N., Liu, X., Liu, J., Zhou, J., Shen, X., Yang, T., Chen, Y., et al. (2017) · Advanced Materials · doi:10.1002/adma.201605160 · Cited by 382
Sulfur-graphene composite for rechargeable lithium batteries
Wang, J.-Z., Lu, L., Choucair, M., Stride, J. A., Xu, X., & Liu, H.-K. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2010.09.106 · Cited by 380
New insight into the discharge process of sulfur cathode by electrochemical impedance spectroscopy
Yuan, L., Qiu, X., Chen, L., & Zhu, W. (2009) · Journal of Power Sources · doi:10.1016/j.jpowsour.2008.10.033 · Cited by 380
A Mathematical Model for a Lithium–Sulfur Cell
Kumaresan, K., Mikhaylik, Y., & White, R. E. (2008) · Journal of The Electrochemical Society · doi:10.1149/1.2937304 · Cited by 375
Carbonized Eggshell Membrane as a Natural Polysulfide Reservoir for Highly Reversible Li‐S Batteries
Chung, S., & Manthiram, A. (2014) · Advanced Materials · doi:10.1002/adma.201304365 · Cited by 375
Self-citationWang, J., Chew, S. Y., Zhao, Z. W., Ashraf, S., Wexler, D., Chen, J., Ng, S. H., Chou, S. L., & Liu, H. K. (2008) · Carbon · doi:10.1016/j.carbon.2007.11.007 · Cited by 371
In Situ Reactive Assembly of Scalable Core–Shell Sulfur–MnO2 Composite Cathodes
Liang, X. M., & Nazar, L. F. (2016) · ACS Nano · doi:10.1021/acsnano.5b07458 · Cited by 371
Performance Improvement of Magnesium Sulfur Batteries with Modified Non‐Nucleophilic Electrolytes
Zhao‐Karger, Z., Zhao, X., Wang, D., Diemant, T., Behm, R. J., & Fichtner, M. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201401155 · Cited by 370
Yuan, L., Yuan, H., Qiu, X., Chen, L., & Zhu, W. (2009) · Journal of Power Sources · doi:10.1016/j.jpowsour.2008.12.149 · Cited by 369
Chung, S., & Manthiram, A. (2014) · Advanced Materials · doi:10.1002/adma.201402893 · Cited by 364
Self-citationJiang, T., Chollier Brym, M. J., Dubé, G., Lasia, A., & Brisard, G. M. (2006) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2005.10.046 · Cited by 363
Tao, Y., Wei, Y., Liu, Y., Wang, J., Qiao, W., Ling, L., & Long, D. (2016) · Energy & Environmental Science · doi:10.1039/c6ee01662f · Cited by 362
Chen, W., Lei, T., Qian, T., Lv, W., He, W., Wu, C., Liu, X., Liu, J., Chen, B., Yan, C., et al. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201702889 · Cited by 362
Electrochemistry of a nonaqueous lithium/sulfur cell
Yamin, H., & Peled, E. (1983) · Journal of Power Sources · doi:10.1016/0378-7753(83)87029-3 · Cited by 360
Wang, X., Li, G., Li, J., Zhang, Y., Wook, A., Yu, A., & Chen, Z. (2016) · Energy & Environmental Science · doi:10.1039/c6ee00194g · Cited by 360
Nanomaterials: Science and applications in the lithium–sulfur battery
Ma, L., Hendrickson, K. E., Wei, S., & Archer, L. A. (2015) · Nano Today · doi:10.1016/j.nantod.2015.04.011 · Cited by 359
Zhang, Z., Peng, H., Zhao, M., & Huang, J. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201707536 · Cited by 357
Sandwich-type functionalized graphene sheet-sulfur nanocomposite for rechargeable lithium batteries
Cao, Y., Li, X., Aksay, I. A., Lemmon, J., Nie, Z., Yang, Z., & Liu, J. (2011) · Physical Chemistry Chemical Physics · doi:10.1039/c0cp02477e · Cited by 356
Designing Safe Electrolyte Systems for a High‐Stability Lithium–Sulfur Battery
Chen, W., Lei, T., Wu, C., Deng, M., Gong, C., Hu, K., Ma, Y., Dai, L., Lv, W., He, W., et al. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201702348 · Cited by 356
Encapsulated Monoclinic Sulfur for Stable Cycling of Li–S Rechargeable Batteries
Moon, S., Jung, Y. H., Jung, W. K., Jung, D. S., Choi, J. W., & Kim, D. K. (2013) · Advanced Materials · doi:10.1002/adma.201303166 · Cited by 354
Strubel, P., Thieme, S., Biemelt, T., Helmer, A., Oschatz, M., Brückner, J., Althues, H., & Kaskel, S. (2015) · Advanced Functional Materials · doi:10.1002/adfm.201402768 · Cited by 352
Wang, Y., Zhang, B., Lai, W., Xu, Y., Chou, S., Liu, H., & Dou, S. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201602829 · Cited by 349
Exploiting a robust biopolymer network binder for an ultrahigh-areal-capacity Li–S battery
Liu, J., Galpaya, D. G. D., Yan, L., Sun, M., Lin, Z., Yan, C., Liang, C., & Zhang, S. (2017) · Energy & Environmental Science · doi:10.1039/c6ee03033e · Cited by 347
Chen, S.-R., Zhai, Y.-P., Xu, G.-L., Jiang, Y.-X., Zhao, D.-Y., Li, J.-T., Huang, L., & Sun, S.-G. (2011) · Electrochimica Acta · doi:10.1016/j.electacta.2011.03.005 · Cited by 346
Yu, M., Ma, J., Song, H., Wang, A., Tian, F., Wang, Y., Qiu, H., & Wang, R. (2016) · Energy & Environmental Science · doi:10.1039/c5ee03902a · Cited by 345
Enhanced Li–S Batteries Using Amine-Functionalized Carbon Nanotubes in the Cathode
Ma, L., Zhuang, H. L., Wei, S., Hendrickson, K. E., Kim, M. S., Cohn, G., Hennig, R. G., & Archer, L. A. (2016) · ACS Nano · doi:10.1021/acsnano.5b06373 · Cited by 345
Ambient Temperature Sodium–Sulfur Batteries
Manthiram, A., & Yu, X. (2015) · Small · doi:10.1002/smll.201403257 · Cited by 344
Self-citationWei, S., Zhang, H., Huang, Y., et al. (2011) · Energy & Environmental Science · doi:10.1039/c0ee00505c · Cited by 339
Cao, J., Chen, C., Zhao, Q., Zhang, N., Lu, Q., Wang, X., Niu, Z., & Chen, J. (2016) · Advanced Materials · doi:10.1002/adma.201602262 · Cited by 339
Chen, K., Sun, Z., Fang, R., Shi, Y., Cheng, H., & Li, F. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201707592 · Cited by 339
Zhao-Karger, Z., Liu, R., Dai, W., Li, Z., Diemant, T., Vinayan, B. P., Bonatto Minella, C., Yu, X., Manthiram, A., Behm, R. J., et al. (2018) · ACS Energy Letters · doi:10.1021/acsenergylett.8b01061 · Cited by 339
Self-citationImproved dischargeability and reversibility of sulfur cathode in a novel ionic liquid electrolyte
Yuan, L. X., Feng, J. K., Ai, X. P., Cao, Y. L., Chen, S. L., & Yang, H. X. (2006) · Electrochemistry Communications · doi:10.1016/j.elecom.2006.02.007 · Cited by 336
Cited by
A reflection on lithium-ion battery cathode chemistry
Manthiram, A. (2020) · Nature Communications · doi:10.1038/s41467-020-15355-0 · Cited by 2,796
Self-citationCurrent status and future directions of multivalent metal-ion batteries
Liang, Y., Dong, H., Aurbach, D., & Yao, Y. (2020) · Nature Energy · doi:10.1038/s41560-020-0655-0 · Cited by 1,521
Formulating energy density for designing practical lithium–sulfur batteries
Zhou, G., Chen, H., & Cui, Y. (2022) · Nature Energy · doi:10.1038/s41560-022-01001-0 · Cited by 983
Review on Li Deposition in Working Batteries: From Nucleation to Early Growth
Chen, X., Zhao, B., Yan, C., & Zhang, Q. (2021) · Advanced Materials · doi:10.1002/adma.202004128 · Cited by 456
Emerging Catalysts to Promote Kinetics of Lithium–Sulfur Batteries
Wang, P., Xi, B., Huang, M., Chen, W., Feng, J., & Xiong, S. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202002893 · Cited by 451
Metadata
- Authors
- Chung, S., & Manthiram, A.
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2019-05-13
- Volume
- 31
- Issue
- 27
- Pages
- e1901125-e1901125
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W2945986935
- Cited by
- 622
- References
- 438
- FWCI
- 27.14
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.