On-Board Chargers for Electric Vehicles: A Comprehensive Performance and Efficiency Review
Open accessThe DOI matches its Crossref record; 100 of the 100 references it cites were found in a registry or an index; 21 of the 97 sources its claims cite were checked for support.
Abstract
The transportation industry is experiencing a switch towards electrification. Availability of electric vehicle (EV) charging infrastructure is very critical for broader acceptance of EVs. The increasing use of OBCs, due to their cost-effectiveness and ease of installation, necessitates addressing key challenges. These include achieving high efficiency and power density to overcome space limitations and reduce charging times. Additionally, the growing interest in bidirectional power flow, allowing EVs to supply power back to the grid, highlights the importance of innovative OBC solutions. This review article provides a thorough analysis of the current advancements, challenges, and prospects in EV on-board charger technology. It aims to offer a comprehensive review of OBC architectures, components, technologies, and emerging trends, guiding future research and development. Addressing these challenges is essential to enhance the efficiency, reliability, and integration of OBCs within the broader EV ecosystem.
Overview
CoChat Summary
TL;DR
This review surveys EV on-board charger (OBC) technology, covering charging levels, standards, unidirectional/bidirectional topologies, design targets, and emerging trends. It finds OBCs are limited to Level 1/2 AC charging, with bidirectional V2G capability and wide bandgap devices as key directions for higher efficiency and power density.
Key findings
- Charging levels: Level 1 up to 1.92 kW (120 V), Level 2 up to 19.2 kW (240 V), and Level 3 20–350 kW (300–800 V DC); OBCs support only Level 1 and Level 2, while off-board chargers are needed for fast charging.
- Unidirectional OBCs are cheaper and G2V-only; bidirectional OBCs enable V2G, can provide higher power density and faster control, but add components and cost. Table 3 lists unidirectional efficiencies from 90.6% to >97% (and 97.2% for a 120 W NLCC converter); Table 4 lists bidirectional efficiencies from 94.5% to 97.8% and power densities from 2.3 to 9.5 kW/L.
- The review reports single-stage OBCs can be more efficient than two-stage OBCs; one cited single-stage 8 kW design achieved 99% peak efficiency (98.7% at 10% input voltage) and 4 kW/L in the text, while Table 4 lists 97.1% and 7.3 kW/L for [114] — an inconsistency in the paper.
- Wide bandgap devices (SiC, GaN) are described as superior to Si in properties such as thermal conductivity, breakdown voltage, and bandgap; SiC MOSFETs can cost up to five times more than silicon counterparts. WBG devices can enable junction temperatures above 150 °C, switching frequencies greater than 200 kHz, and efficiency exceeding 98%.
Methods
- Review article; no experimental data are generated. It analyzes existing EV charging methods, standards, design considerations, and state-of-the-art OBCs.
- Compares OBCs using design/purpose, technical specifications (power rating, efficiency, topology), electrical performance (power factor), and cost/lifetime; presents tabular comparisons of unidirectional and bidirectional OBCs.
- Literature base consists of prior reviews and selected OBC topologies; no systematic search protocol or formal inclusion criteria beyond the stated evaluation parameters are reported.
Limitations
- The paper does not explicitly state limitations of its own review. It notes that cost comparisons are approximate because fuel costs vary with taxes and subsidies, and that V2G is still in its infancy.
- Evident from the text: no experimental validation; reliance on reported literature; inconsistent numbers between narrative and tables (e.g., [114] efficiency/power density); and duplicated passages and typographical errors.
Model-written summary. Check it against the paper before relying on it.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
15 Valid · 7 Not valid · 58 Not checked · 31 Own results and interpretations
At least one cited source doesn’t support this claim or points to a different paper, and none confirmed it — see the verdicts below.
In the paper
“The study in [52] includes very few selected bidirectional OBCs, consisting of a report on the power density of four industrial OBCs.”
§ On-Board Chargers for Electric Vehicles: A Comprehensive Performance and Efficiency Review > 5. Existing EV-Related Survey
What the sources say
- Disputedcites [52] Yuan, 2021, A review of bidirectional on-board chargers for electric vehicles, IEEE Access sourceExperimental — accuracy not yet measured
The Commercial Examples section (p. 6) says the review shows six supplier designs, not four. The Conclusion (p. 13) also describes a broader review of OBC architectures, standards, topologies, and trends, rather than a study consisting only of a power-density report. (LLM, conf=0.90)
Checked by a reasoning model — may be wrong.
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Disputed
The cited sources that could be checked couldn’t confirm or dispute this claim.
In the paper
“OBCs result in better battery life compared to off-board chargers [12].”
§ On-Board Chargers for Electric Vehicles: A Comprehensive Performance and Efficiency Review > 2.2. Charging Methods
What the sources say
- Could not verifycites [12] Sanguesa, 2021, A Review on Electric Vehicles: Technologies and Challenges, Smart Cities sourceExperimental — accuracy not yet measured
Section 5.2 (Connectors; page unavailable) distinguishes the vehicle’s AC/DC converter from external charging stations, while Section 4.1 (Characteristics of the Batteries; page unavailable) discusses heat loss during quick versus slow charging. Neither passage compares battery life with on-board and off-board chargers; searches for both charger terms found no such comparison. (LLM, conf=0.76)
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Could not verify
The cited sources that could be checked couldn’t confirm or dispute this claim.
In the paper
“By using WBG devices, there is no need for low-voltage series MOSFETs and fast-recovering parallel diodes [126].”
§ On-Board Chargers for Electric Vehicles: A Comprehensive Performance and Efficiency Review > 7.4. Introduction of Wide Bandgap (WBG) Devices
What the sources say
- Could not verifycites [126] Nasr Esfahani, F., Darwish, A., and Ma, X. (2024). Design and Control of a Modular Integrated On-Board Battery Charger for EV Applications with Cell Balancing. MDPI Batter., 10. sourceExperimental — accuracy not yet measured
Section 2 describes a modular charger with SEPIC and H-bridge converters, while the Conclusions say its design allows lower-rated semiconductor switches. Neither passage says that using wide-bandgap (WBG) devices eliminates series MOSFETs or parallel fast-recovery diodes. Searches for WBG, MOSFETs, and fast-recovery diodes found no passage addressing that claim. (LLM, conf=0.76)
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Could not verify
Every source the paper cites for this claim was checked and supports it.
In the paper
“With an off-board charger, handling the charger's weight and size is easier since there are no space and volume constraints set aside for these types of chargers [20].”
§ On-Board Chargers for Electric Vehicles: A Comprehensive Performance and Efficiency Review > 2.2. Charging Methods
What the sources say
- Supportedcites [20] Acharige, 2023, Review of Electric Vehicle Charging Technologies, Standards, Architectures, and Converter Configurations, IEEE Access source
The Offboard Chargers section says the power-conversion stage is outside the EV, while the Onboard Chargers section identifies vehicle volume and weight as constraints. Together, these passages support the claim that accommodating an off-board charger's size and weight is easier; page numbers were not provided in our copy's excerpts. (LLM, conf=0.88)
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Supported
Every source the paper cites for this claim was checked and supports it.
In the paper
“They propose a single-stage unidirectional OBC that uses a series resonant converter with diodes as clamping (DC-SRC) devices.”
§ On-Board Chargers for Electric Vehicles: A Comprehensive Performance and Efficiency Review > 5.1. State of the Art Unidirectional On-Board Chargers
What the sources say
- Supportedcites [99] Yoon, 2013, Single-stage battery charger for light electric vehicles based on DC-SRC with current-boosting circuit, Electron. Lett. source
The Abstract describes the proposed single-stage battery charger as based on a diode-clamped series resonant converter (DC-SRC). The Introduction places it in the context of on-board chargers for light electric vehicles, and the proposed-method passage describes current flowing through diodes toward the battery, consistent with unidirectional charging. The indexed copy provides no page number for these passages. (LLM, conf=0.90)
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Supported
24 more claims · 2 with their cited sources checked
Create a free account to see all 111 claims and to verify the 5 references still open.
- Probably not a substantial claim. 49
- It may state two separate claims as one. 41
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
Each contradiction between two passages listed here was confirmed by an independent check.
Rated major: it would touch a result — a value a result rests on, reported and recomputed p-values on opposite sides of the significance level, two passages that conflict with no sign which is right, or a cited work retracted before this paper was published.
In the paper
§ On-Board Chargers for Electric Vehicles: A Comprehensive Performance and Efficiency Review > 5.2. State of the Art Bidirectional On-Board Chargers
“A 400 V battery is being charged with a peak efficiency of 99%.”
§ On-Board Chargers for Electric Vehicles: A Comprehensive Performance and Efficiency Review > 8. Conclusions
“[114] | Single-Stage 3P IMDAB | 8.0 kW | 7.3 kW/L | 97.1% | 2020 | |”
Rated major: it would touch a result — a value a result rests on, reported and recomputed p-values on opposite sides of the significance level, two passages that conflict with no sign which is right, or a cited work retracted before this paper was published.
In the paper
§ On-Board Chargers for Electric Vehicles: A Comprehensive Performance and Efficiency Review > 5.2. State of the Art Bidirectional On-Board Chargers
“the power density has a value of 4 kW/L.”
§ On-Board Chargers for Electric Vehicles: A Comprehensive Performance and Efficiency Review > 8. Conclusions
“[114] | Single-Stage 3P IMDAB | 8.0 kW | 7.3 kW/L | 97.1% | 2020 | |”
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
§ On-Board Chargers for Electric Vehicles: A Comprehensive Performance and Efficiency Review > 5.2. State of the Art Bidirectional On-Board Chargers
“Table 4 summarizes the discussed topologies of bidirectional on-board chargers according to their rated power, efficiency, and power factor.”
§ On-Board Chargers for Electric Vehicles: A Comprehensive Performance and Efficiency Review > 8. Conclusions
“| Ref. | Topology | Power Rating | Power Density | Efficiency | Year | |”
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
§ On-Board Chargers for Electric Vehicles: A Comprehensive Performance and Efficiency Review > 2.2. Charging Methods
“Figure 6b shows the circuit diagram for a single-stage on-board charger.”
§ On-Board Chargers for Electric Vehicles: A Comprehensive Performance and Efficiency Review > 8. Conclusions
“(b) basic architecture of a two-stage on-board charger.”
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
§ On-Board Chargers for Electric Vehicles: A Comprehensive Performance and Efficiency Review > 5.1. State of the Art Unidirectional On-Board Chargers
“Hence, this topology has the highest efficiency among all the other reviewed strategies.”
§ On-Board Chargers for Electric Vehicles: A Comprehensive Performance and Efficiency Review > 5.1. State of the Art Unidirectional On-Board Chargers
“This research was able to achieve an efficiency of >97%.”
Citations
Cites
Yilmaz, M., & Krein, P. T. (2013) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2012.2212917 · Cited by 3,118 · cited 10×
“Level 1 Charger (AC Charging): The majority of electric vehicle charging occurs overnight at home, typically in a garage, where the EV can be easily connected to a nearby outlet [13,25].”
InfluentialA Review of Three-Phase Improved Power Quality AC–DC Converters
Singh, B., Singh, B. N., Chandra, A., Al-Haddad, K., Pandey, A., & Kothari, D. P. (2004) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2004.825341 · Cited by 1,728 · cited 2×
“…meant for conversion of AC into DC while charging the battery of an EV, which is known as grid-to-vehicle (G2V) mode of operation. charging the ba tt ery of an EV, which is known as In most of the cases, a unidirectional charger consists of a diode bridge, a filter, and a DC–DC converter [13,39].”
Integration of electric vehicles in the electric power system
Lopes, J. A. P., Soares, F. J., & Almeida, P. M. R. (2011) · Proceedings of the IEEE · doi:10.1109/jproc.2010.2066250 · Cited by 1,465 · cited 1×
“For the implementation of V2G [122], a dependable battery management system, and a precise state-of-charge predictions, and real-time grid data collection are very important [123].”
A Review on Electric Vehicles: Technologies and Challenges
Sanguesa, J. A., Torres-Sanz, V., Garrido, P., Martinez, F. J., & Marquez-Barja, J. M. (2021) · Smart Cities · doi:10.3390/smartcities4010022 · Cited by 1,367 · cited 2×
“Furthermore, the use of renewable energy sources for electricity generation can further minimize the environmental impact of EVs [7,12].”
A review of single-phase improved power quality ac~dc converters
Singh, B., Singh, B. N., Chandra, A., Al-Haddad, K., Pandey, A., & Kothari, D. P. (2003) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2003.817609 · Cited by 1,297
Mwasilu, F., Justo, J. J., Kim, E.-K., Do, T. D., & Jung, J.-W. (2014) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2014.03.031 · Cited by 1,162 · cited 1×
“Different researchers have worked and summarized many EV-related topics such as charging infrastructure [85–87], smart grid integration [81,88,89], and effects of vehicle-to-grid (V2G) technique [82,85,90] in their previous works.”
Das, H. S., Rahman, M. M., Li, S., & Tan, C. W. (2020) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2019.109618 · Cited by 1,140 · cited 9×
“Even though most standardizing bodies like ISO, IEEE, and UL define most of the safety standards, bodies like the National Fire Protection Association (NFPA) and the National Electric Code (NEC) are meant precisely for safety measures [23].”
InfluentialA review on the state-of-the-art technologies of electric vehicle, its impacts and prospects
Yong, J. Y., Ramachandaramurthy, V. K., Tan, K. M., & Mithulananthan, N. (2015) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.04.130 · Cited by 1,081 · cited 1×
“In [93], the authors discussed the history of development of EVs from the time they first came into existence to the present day.”
Review of the Impact of Vehicle-to-Grid Technologies on Distribution Systems and Utility Interfaces
Yilmaz, M., & Krein, P. T. (2013) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2012.2227500 · Cited by 1,024 · cited 1×
“Different researchers have worked and summarized many EV-related topics such as charging infrastructure [85–87], smart grid integration [81,88,89], and effects of vehicle-to-grid (V2G) technique [82,85,90] in their previous works.”
Using fleets of electric-drive vehicles for grid support
Tomić, J., & Kempton, W. (2007) · Journal of Power Sources · doi:10.1016/j.jpowsour.2007.03.010 · Cited by 1,018
Richardson, D. B. (2013) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2012.11.042 · Cited by 999 · cited 1×
“The impacts that electric vehicles (EVs) can have on the necessary levels of potential of the grid, productivity, and efficiency have been investigated in [94].”
Tan, K. M., Ramachandaramurthy, V. K., & Yong, J. Y. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.09.012 · Cited by 872 · cited 1×
“Different researchers have worked and summarized many EV-related topics such as charging infrastructure [85–87], smart grid integration [81,88,89], and effects of vehicle-to-grid (V2G) technique [82,85,90] in their previous works.”
Optimal Charging Strategies for Unidirectional Vehicle-to-Grid
Sortomme, E., & El-Sharkawi, M. A. (2011) · IEEE Transactions on Smart Grid · doi:10.1109/tsg.2010.2090910 · Cited by 782 · cited 1×
“Most utility goals may be met by unidirectional chargers while avoiding performance, cost, and safety issues [41,42]. utility goals may be met by unidirectional chargers while avoiding performance safety issues [41,42].”
Global Trends in High-Power On-Board Chargers for Electric Vehicles
Khaligh, A., & D'Antonio, M. (2019) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2019.2897050 · Cited by 652 · cited 1×
“As a result of the fact that EVs can supply energy back to the grid, i.e., EVs can be treated as energy sources, there is a need for a stricter and more clearly defined set of standards [62].”
The impact of plug-in hybrid electric vehicles on distribution networks: A review and outlook
Green, R. C., Wang, L., & Alam, M. (2011) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2010.08.015 · Cited by 640 · cited 1×
“Different researchers have worked and summarized many EV-related topics such as charging infrastructure [85–87], smart grid integration [81,88,89], and effects of vehicle-to-grid (V2G) technique [82,85,90] in their previous works.”
Safayatullah, M., Elrais, M. T., Ghosh, S., Rezaii, R., & Batarseh, I. (2022) · IEEE Access · doi:10.1109/access.2022.3166935 · Cited by 615 · cited 2×
“For this purpose, a Level 1 charger is used, which deals with low power levels up to 1.92 kW [26,27].”
InfluentialAcharige, S. S. G., Haque, M. E., Arif, M. T., Hosseinzadeh, N., Hasan, K. N., & Oo, A. M. T. (2023) · IEEE Access · doi:10.1109/access.2023.3267164 · Cited by 590 · cited 8×
“With an o ff -board charger, handling the charger’s weight and size is easier since there are no space and volume constraints set aside for these types of chargers [20].”
InfluentialHabib, S., Kamran, M., & Rashid, U. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.12.020 · Cited by 556 · cited 1×
“Different researchers have worked and summarized many EV-related topics such as charging infrastructure [85–87], smart grid integration [81,88,89], and effects of vehicle-to-grid (V2G) technique [82,85,90] in their previous works.”
Mastoi, M. S., Zhuang, S., Munir, H. M., Haris, M., Hassan, M., Usman, M., Bukhari, S. S. H., & Ro, J.-S. (2022) · Energy Reports · doi:10.1016/j.egyr.2022.09.011 · Cited by 523 · cited 1×
“There are three types of charging levels (Level 1, Level 2, and Level 3) for electric vehicles, based on the voltage and power handling capabilities according to established standards [24].”
Inductive Wireless Power Transfer Charging for Electric Vehicles—A Review
Mahesh, A., Chokkalingam, B., & Mihet-Popa, L. (2021) · IEEE Access · doi:10.1109/access.2021.3116678 · Cited by 513
An LLC Resonant DC–DC Converter for Wide Output Voltage Range Battery Charging Applications
Musavi, F., Craciun, M., Gautam, D. S., Eberle, W., & Dunford, W. G. (2013) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2013.2241792 · Cited by 498 · cited 2×
“The second stage, being a DC–DC converter, is meant for regulating the charging algorithm of the EV ba tt ery [28,51].”
Advanced Integrated Bidirectional AC/DC and DC/DC Converter for Plug-In Hybrid Electric Vehicles
Lee, Y.-J., Khaligh, A., & Emadi, A. (2009) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2009.2028070 · Cited by 476
Hu, J., Morais, H., Sousa, T., & Lind, M. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.12.014 · Cited by 460 · cited 1×
“[97] offers an updated categorization of techniques for the smart charging of EVs mainly focusing on aspects like design, charging, and the protocols for communication.”
800-V Electric Vehicle Powertrains: Review and Analysis of Benefits, Challenges, and Future Trends
Aghabali, I., Bauman, J., Kollmeyer, P. J., Wang, Y., Bilgin, B., & Emadi, A. (2021) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2020.3044938 · Cited by 434 · cited 1×
“In [91], the effects of OBCs when integrated with the EV on the powertrain of EV have been studied, while [92] focuses on 800 V powertrains, their advantages, obstacles, and associated trends.”
Habib, S., Khan, M. M., Abbas, F., Sang, L., Shahid, M. U., & Tang, H. (2018) · IEEE Access · doi:10.1109/access.2018.2812303 · Cited by 416
Self-citationRahman, I., Vasant, P. M., Singh, B. S. M., Abdullah-Al-Wadud, M., & Adnan, N. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.12.353 · Cited by 399 · cited 1×
“In [96], a variety of practical solutions to issues pertaining to PHEV and BEV charging were discussed.”
A Review of Bidirectional On-Board Chargers for Electric Vehicles
Yuan, J., Dorn-Gomba, L., Callegaro, A. D., Reimers, J., & Emadi, A. (2021) · IEEE Access · doi:10.1109/access.2021.3069448 · Cited by 390 · cited 4×
“SAEJ2847 [52] and SAEJ2836 [52,56] Communication requirements between an EV and power grid.”
InfluentialElectric Vehicle Charging Infrastructure: From Grid to Battery
Rivera, S., Kouro, S., Vazquez, S., Goetz, S. M., Lizana, R., & Romero-Cadaval, E. (2021) · IEEE Industrial Electronics Magazine · doi:10.1109/mie.2020.3039039 · Cited by 301 · cited 1×
“The reports suggest that there will be approximately around 230 million electric vehicles by the end of 2030, and in 2040 it is estimated that almost 58% of all the vehicle types will be electric [83].”
Bidirectional Onboard Chargers for Electric Vehicles: State-of-the-Art and Future Trends
Wouters, H., & Martinez, W. (2024) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2023.3319996 · Cited by 280 · cited 3×
“The global transition towards a sustainable and carbon-neutral future highlights the critical role of electric vehicles (EVs) in mitigating climate change and reducing greenhouse gas emissions [1].”
InfluentialReview of power electronics in vehicle-to-grid systems
Sharma, A., & Sharma, S. (2019) · Journal of Energy Storage · doi:10.1016/j.est.2018.11.022 · Cited by 261 · cited 1×
“Different researchers have worked and summarized many EV-related topics such as charging infrastructure [85–87], smart grid integration [81,88,89], and effects of vehicle-to-grid (V2G) technique [82,85,90] in their previous works.”
A High-Efficiency High-Density Wide-Bandgap Device-Based Bidirectional On-Board Charger
Li, B., Li, Q., Lee, F. C., Liu, Z., & Yang, Y. (2018) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2018.2845846 · Cited by 259 · cited 3×
“A design identical to [109] has been proposed in [111] with an efficiency of 97.8% along with a power density of 8 kW/L.”
InfluentialRajendran, G., Vaithilingam, C. A., Misron, N., Naidu, K., & Ahmed, M. R. (2021) · Journal of Energy Storage · doi:10.1016/j.est.2021.103099 · Cited by 247 · cited 1×
“The grid integration standards deal with charging and discharging processes when an EV is connected to the grid [58,61].”
Albatayneh, A., Assaf, M. N., Alterman, D., & Jaradat, M. (2020) · Environmental and Climate Technologies · doi:10.2478/rtuect-2020-0041 · Cited by 245 · cited 2×
“Electric drivetrains are signi fi cantly more e ffi cient than internal combustion engines [8,9], converting a higher percentage of stored energy into motion, which translates to lower operational costs [10].”
A 300-kHz 6.6-kW SiC Bidirectional LLC Onboard Charger
Li, H., Zhang, Z., Wang, S., Tang, J., Ren, X., & Chen, Q. (2020) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2019.2910048 · Cited by 237 · cited 2×
“A two-stage OBC prototypes based on bidirectional LLC converter were proposed in [112,113].”
Factors influencing the economics of public charging infrastructures for EV – A review
Zhang, Q., Li, H., Zhu, L., Campana, P. E., Lu, H., Wallin, F., & Sun, Q. (2018) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2018.06.022 · Cited by 236 · cited 1×
“Different researchers have worked and summarized many EV-related topics such as charging infrastructure [85–87], smart grid integration [81,88,89], and effects of vehicle-to-grid (V2G) technique [82,85,90] in their previous works.”
Metwly, M. Y., Abdel-Majeed, M. S., Abdel-Khalik, A. S., Hamdy, R. A., Hamad, M. S., & Ahmed, S. (2020) · IEEE Access · doi:10.1109/access.2020.2992741 · Cited by 229 · cited 1×
“For instance, the dual-use of motor windings in the charging process, as seen in Integrated Charger Inverter (ICI) systems, eliminates the need for separate inductors, reducing weight and improving efficiency [19,118].”
High-Efficiency High-Density Critical Mode Rectifier/Inverter for WBG-Device-Based On-Board Charger
Liu, Z., Li, B., Lee, F. C., & Li, Q. (2017) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2017.2716873 · Cited by 221 · cited 1×
“At the same time, it also lowers the size and overall price [124].”
Review of high power isolated bi-directional DC-DC converters for PHEV/EV DC charging infrastructure
Du, Y., Lukic, S., Jacobson, B., & Huang, A. (2011) · 2011 IEEE Energy Conversion Congress and Exposition · doi:10.1109/ecce.2011.6063818 · Cited by 218 · cited 1×
“Most utility goals may be met by unidirectional chargers while avoiding performance, cost, and safety issues [41,42]. utility goals may be met by unidirectional chargers while avoiding performance safety issues [41,42].”
Li, B., Li, Q., & Lee, F. C. (2019) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2018.2874806 · Cited by 211 · cited 1×
“A design identical to [109] has been proposed in [111] with an efficiency of 97.8% along with a power density of 8 kW/L.”
InfluentialEV charging stations and modes: International standards
Falvo, M. C., Sbordone, D., Bayram, I. S., & Devetsikiotis, M. (2014) · 2014 International Symposium on Power Electronics, Electrical Drives, Automation and Motion · doi:10.1109/speedam.2014.6872107 · Cited by 209 · cited 5×
“EV producers in the U.S.A. make use of the Society for Automobile Engineers (SAE) and IEEE standards [56].”
InfluentialMohammed, S. A. Q., & Jung, J.-W. (2021) · IEEE Access · doi:10.1109/access.2021.3055027 · Cited by 196 · cited 2×
“Finally, a DC/DC converter (e.g., full bridge, fl yback etc.) is used for ge tt ing a controlled Hence, we get an efficient and safe charging [78–80].”
Bi-directional charging topologies for plug-in hybrid electric vehicles
Erb, D. C., Onar, O. C., & Khaligh, A. (2010) · 2010 Twenty-Fifth Annual IEEE Applied Power Electronics Conference and Exposition (APEC) · doi:10.1109/apec.2010.5433520 · Cited by 193
Weldon, P., Morrissey, P., & O’Mahony, M. (2018) · Sustainable Cities and Society · doi:10.1016/j.scs.2018.02.024 · Cited by 188 · cited 3×
“Battery weight and thermal management are also critical issues [10,11].”
Ahmad, A., Khan, Z. A., Saad Alam, M., & Khateeb, S. (2018) · Smart Science · doi:10.1080/23080477.2017.1420132 · Cited by 185
99% Efficient Isolated Three-Phase Matrix-Type DAB Buck–Boost PFC Rectifier
Schrittwieser, L., Leibl, M., & Kolar, J. W. (2020) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2019.2914488 · Cited by 169 · cited 2×
“As discussed in the previous Section, in [114], a converter architecture with single-stage operation having an efficiency of almost 99% has been demonstrated.”
Single-Phase On-Board Integrated Battery Chargers for EVs Based on Multiphase Machines
Subotic, I., Bodo, N., & Levi, E. (2016) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2015.2504400 · Cited by 157
Zhou, X., Lukic, S., Bhattacharya, S., & Huang, A. (2009) · 2009 IEEE Vehicle Power and Propulsion Conference · doi:10.1109/vppc.2009.5289691 · Cited by 138
State-of-the-art in electric vehicle charging infrastructure
Foley, A. M., Winning, I. J., & O Gallachoir, B. P. (2010) · 2010 IEEE Vehicle Power and Propulsion Conference · doi:10.1109/vppc.2010.5729014 · Cited by 130 · cited 1×
“[13,23,63,64].”
Charging Electric Vehicles in the Smart City: A Survey of Economy-Driven Approaches
Shuai, W., Maille, P., & Pelov, A. (2016) · IEEE Transactions on Intelligent Transportation Systems · doi:10.1109/tits.2016.2519499 · Cited by 122 · cited 1×
“In [95], a general idea about a new economic model present in electric vehicles is discussed.”
Multi-function bi-directional battery charger for plug-in hybrid electric vehicle application
Zhou, X., Wang, G., Lukic, S., Bhattacharya, S., & Huang, A. (2009) · 2009 IEEE Energy Conversion Congress and Exposition · doi:10.1109/ecce.2009.5316226 · Cited by 117
Design of an Isolated DC/DC Topology With High Efficiency of Over 97% for EV Fast Chargers
Lee, W.-S., Kim, J.-H., Lee, J.-Y., & Lee, I.-O. (2019) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2019.2949080 · Cited by 111 · cited 1×
“The authors of [105] suggest that a single-stage charger is employed when reduced cost and compact size are required.”
Li, C., Zhang, Y., Cao, Z., & XU, D. (2017) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2016.2623771 · Cited by 86 · cited 1×
“The research in [104] suggests a modified version of a full bridge by installing a new path for the current to flow parallel to the full bridge.”
Gaining vehicle-to-grid benefits with unidirectional electric and plug-in hybrid vehicle chargers
Fasugba, M. A., & Krein, P. T. (2011) · 2011 IEEE Vehicle Power and Propulsion Conference · doi:10.1109/vppc.2011.6043207 · Cited by 77 · cited 2×
“…streamlines challenges during interconnection, and typically lessens battery wear, unidirectional charging is logically the first step [39,40]. hardware demands, streamlines challenges during interconnection, and lessens ba tt ery wear, unidirectional charging is logically the fi rst step [39,40].”
Analysis and Design of a New AC–DC Single-Stage Full-Bridge PWM Converter With Two Controllers
Das, P., Pahlevaninezhad, M., & Moschopoulos, G. (2013) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2012.2227915 · Cited by 74 · cited 1×
“A full bridge converter (DC–AC) consisting of two control circuits has been proposed in [100].”
A Critical Review on Charging Technologies of Electric Vehicles
Shahjalal, M., Shams, T., Tasnim, M. N., Ahmed, M. R., Ahsan, M., & Haider, J. (2022) · Energies · doi:10.3390/en15218239 · Cited by 66 · cited 1×
“Power level categories of EV chargers [20,26,30].”
Li, B., Li, Q., & Lee, F. C. (2018) · 2018 IEEE Applied Power Electronics Conference and Exposition (APEC) · doi:10.1109/apec.2018.8341053 · Cited by 62 · cited 2×
“These topologies, such as LLC and CLLC resonant converters, enable zero-voltage switching (ZVS) and zero-current switching (ZCS) conditions, which significantly reduce switching losses and allow for operation at higher frequencies, up to 500 kHz [110].”
InfluentialElectric Vehicle Charging Infrastructure
den Bossche, P. V. (2010) · Elsevier eBooks · doi:10.1016/b978-0-444-53565-8.00020-8 · Cited by 62
Improved Power Quality On-Board Integrated Charger With Reduced Switching Stress
Gupta, J., Maurya, R., & Arya, S. R. (2020) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2020.2981955 · Cited by 60 · cited 1×
“Different standards have been designed to ensure that the process of integration of an EV to the grid is completely safe and dependable [60].”
Review and comparison of bi-directional AC-DC converters with V2G capability for on-board EV and HEV
Koushki, B., Safaee, A., Jain, P., & Bakhshai, A. (2014) · 2014 IEEE Transportation Electrification Conference and Expo (ITEC) · doi:10.1109/itec.2014.6861779 · Cited by 56 · cited 2×
“…of an EV, which is known as grid-to-vehicle On-board chargers for electric vehicle are classified as follows: Unidirectional OBC and Bidirectional OBC [38]: This classi (a) Unidirectional OBC and Bidirectional OBC [38] : This classification is based on their design and purpose. design and purpose.”
IEEE 1547 Standards advancing grid modernization
Basso, T. S., Chakraborty, S., Hoke, A., & Coddington, M. H. (2015) · Conference record of the IEEE Photovoltaic Specialists Conference · doi:10.1109/pvsc.2015.7356267 · Cited by 54
Tong, M., Cheng, M., Hua, W., & Ding, S. (2020) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2020.2974019 · Cited by 54 · cited 2×
“Finally, a DC/DC converter (e.g., full bridge, fl yback etc.) is used for ge tt ing a controlled Hence, we get an efficient and safe charging [78–80].”
Tran, V. T., Sutanto, D., & Muttaqi, K. M. (2017) · 2017 Australasian Universities Power Engineering Conference (AUPEC) · doi:10.1109/aupec.2017.8282421 · Cited by 53 · cited 1×
“Level 1 Charger (AC Charging): The majority of electric vehicle charging occurs overnight at home, typically in a garage, where the EV can be easily connected to a nearby outlet [13,25].”
Praneeth, A. V. J. S., & Williamson, S. S. (2019) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2019.2919197 · Cited by 50
Intelligent Control of Converter for Electric Vehicles Charging Station
Jha, M., Blaabjerg, F., Khan, M. A., Bharath Kurukuru, V. S., & Haque, A. (2019) · Energies · doi:10.3390/en12122334 · Cited by 48 · cited 1×
“We must adhere to the norms for running the entire infrastructure, comprising of the grid, EVs, charging stations, and equipment [75].”
Self-citationTechnology roadmap for smart electric vehicle-to-grid (V2G) of residential chargers
Daim, T. U., Wang, X., Cowan, K. R., & Shott, T. (2016) · Journal of Innovation and Entrepreneurship · doi:10.1186/s13731-016-0043-y · Cited by 46 · cited 1×
“This classification is determined on the basis of the load connected to EV [120].”
Digital control of isolated Cuk power factor correction converter under wide range of load variation
Dian, S., Wen, X., Deng, X., & Zhang, S. (2015) · IET Power Electronics · doi:10.1049/iet-pel.2014.0111 · Cited by 45 · cited 1×
“In [101], the design for an Isolated CUK converter-based PFC has been put forward.”
A 22 kW on-board charger for automotive applications based on a modular design
Schmenger, J., Endres, S., Zeltner, S., & Marz, M. (2014) · 2014 IEEE Conference on Energy Conversion (CENCON) · doi:10.1109/cencon.2014.6967467 · Cited by 44 · cited 1×
“In [107], an OBC compatible with EV and PHEV rated at 22 kW has been put forward.”
A Single-Phase Battery Charger Design for LEV Based on DC-SRC with Resonant Valley-Fill Circuit
Lee, J.-Y., Yoon, Y.-D., & Kang, J.-W. (2015) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2014.2351371 · Cited by 44 · cited 1×
“In [102], for improving the topology presented in [99], a passive power factor correction (PFC) circuit to minimize the switching losses is introduced.”
Jaman, S., Chakraborty, S., Tran, D.-D., Geury, T., Baghdadi, M. E., & Hegazy, O. (2022) · Energies · doi:10.3390/en15155376 · Cited by 43 · cited 1×
“In [91], the effects of OBCs when integrated with the EV on the powertrain of EV have been studied, while [92] focuses on 800 V powertrains, their advantages, obstacles, and associated trends.”
Jamia Millia Islamia (A Central University), & Mateen, S. (2022) · CPSS Transactions on Power Electronics and Applications · doi:10.24295/cpsstpea.2022.00020 · Cited by 42 · cited 1×
“Most of the commercial EVs use the conductive charging method [33].”
Integrated On-Board EV Battery Chargers: New Perspectives and Challenges for Safety Improvement
Valente, M., Wijekoon, T., Freijedo, F. D., Pescetto, P., Pellegrino, G., & Bojoi, R. I. (2021) · IEEE Workshop on Electrical Machines Design, Control and Diagnosis · doi:10.1109/wemdcd51469.2021.9425666 · Cited by 34 · cited 2×
“These are supplied from power sources at home, charging stations, public places (such as parking areas), etc. Figure 4 shows the OBC integrated to an electric vehicle [37].”
Clemente, M., Fanti, M. P., & Ukovich, W. (2014) · IFAC Proceedings Volumes · doi:10.3182/20140824-6-za-1003.01061 · Cited by 32
A SiC Bidirectional LLC On-Board Charger
Li, H., Wang, S., Zhang, Z., Tang, J., Ren, X., & Chen, Q. (2019) · 2019 IEEE Applied Power Electronics Conference and Exposition (APEC) · doi:10.1109/apec.2019.8722324 · Cited by 32 · cited 3×
“A two-stage OBC prototypes based on bidirectional LLC converter were proposed in [112,113].”
InfluentialPEV Charging Technologies and V2G on Distributed Systems and Utility Interfaces
Leskarac, D., Panchal, C., Stegen, S., & Lu, J. (2015) · Institution of Engineering and Technology eBooks · doi:10.1049/pbpo079e_ch6 · Cited by 31 · cited 2×
“IEC-62196 [63] Instructions for charger plugs, sockets, connectors, and vehicle inlets in case of conductive charging.”
Singh, A. K., & Pathak, M. K. (2018) · 2018 IEEE 8th Power India International Conference (PIICON) · doi:10.1109/poweri.2018.8704399 · Cited by 30 · cited 2×
“Charging methods can be classified as conductive charging, battery swapping, and wireless charging [20,31,32].”
A Comprehensive Review on Electric Vehicles Operation, Development and Grid Stability
Painuli, S., Rawat, M. S., & Rayudu, D. R. (2018) · International Conference on Power Energy, Environment and Intelligent Control (PEEIC) · doi:10.1109/peeic.2018.8665643 · Cited by 28 · cited 1×
“The power infrastructure provides an electric circuit or system for power flow between EVs and the grid [22].”
Nassary, M., Orabi, M., & Ghoneima, M. (2018) · 2018 IEEE 4th Southern Power Electronics Conference (SPEC) · doi:10.1109/spec.2018.8635919 · Cited by 28 · cited 6×
“Features like fewer number of components, longer lifetime, and high power density make this charger economical and also decrease the overall volume [28,50].”
InfluentialSanjarbek, R., Mavlonov, J., & Mukhitdinov, A. (2022) · Communications - Scientific letters of the University of Zilina · doi:10.26552/com.c.2022.1.b74-b86 · Cited by 28 · cited 3×
“High-frequency transformers, necessary for galvanic isolation, introduce additional losses and bulk, further complicating efforts to reduce the system’s size and increase efficiency [11].”
EV Charging Definitions, Modes, Levels, Communication Protocols and Applied Standards
Bahrami, A. (2020) · Unpublished · doi:10.13140/rg.2.2.15844.53123/11 · Cited by 27
An integrated onboard charger and accessory power converter using WBG devices
Su, G.-J., & Tang, L. (2015) · 2015 IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce.2015.7310544 · Cited by 26 · cited 1×
“For the implementation of V2G [122], a dependable battery management system, and a precise state-of-charge predictions, and real-time grid data collection are very important [123].”
Electrolytic Capacitor-Less Single-Power-Conversion On-Board Charger With High Efficiency
Jeong, S.-G., Cha, W.-J., Lee, S.-H., Kwon, J.-M., & Kwon, B.-H. (2016) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2016.2590998 · Cited by 26 · cited 1×
“In [103], a circuit with enhanced lifetime, better efficiency, and minimal cost is proposed.”
A review on unidirectional converters for on-board chargers in electric vehicle
Vijayakumar, S., & Sudhakar, N. (2022) · Frontiers in Energy Research · doi:10.3389/fenrg.2022.1011681 · Cited by 26 · cited 4×
“The information about the associated bodies and their most significant standards is given in Table 2 [23,52,57].”
Influential11-kW High-Frequency High-Density Bidirectional OBC with PCB Winding Magnetic Design
Pham, P. H., Nabih, A., Wang, S., & Li, Q. (2022) · 2022 IEEE Applied Power Electronics Conference and Exposition (APEC) · doi:10.1109/apec43599.2022.9773735 · Cited by 24 · cited 1×
“A topology for a two-stage OBC rated at 11 kW is proposed in [116] by Virginia Tech (CPES).”
Electric Vehicles in an Urban Context: Environmental Benefits and Techno-Economic Barriers
Perujo, A., Thiel, C., & Nemry, F. (2011) · Electric Vehicles – The Benefits and Barriers · doi:10.5772/20760 · Cited by 22 · cited 1×
“The limitations of current OBC technology can result in longer charging times, reduced energy efficiency, and higher costs, which in turn affect consumer acceptance and the practicality of EVs [18–20].”
Zhu, T., Zheng, H., & Ma, Z. (2019) · Advances in Mechanical Engineering · doi:10.1177/1687814019833500 · Cited by 21
Hirsch, H., Jeschke, S., Wei, L., Trautmann, M., Barenfanger, J., Maarleveld, M., Heyen, J., & Darrat, A. (2015) · 2015 IEEE International Symposium on Electromagnetic Compatibility (EMC) · doi:10.1109/isemc.2015.7256250 · Cited by 19 · cited 3×
“SAEJ2931 [58] Guidelines for digital communication between EVs and grid.”
Two stage integrated on-board charger for EVs
Vankayalapati, B. T., Singh, R., & Bussa, V. K. (2018) · 2018 IEEE International Conference on Industrial Technology (ICIT) · doi:10.1109/icit.2018.8352458 · Cited by 18 · cited 3×
“Rectification and correction of power factor take place in the first stage [49].”
InfluentialHaque, A., Kurukuru, V. S. B., & Khan, M. A. (2019) · IET Power Electronics · doi:10.1049/iet-pel.2019.0048 · Cited by 18 · cited 1×
“The V2G feature enables EVs to act as a source of energy and send energy (electricity) back into the grid, avoiding or at least delaying the load shedding [121].”
Self-citationElectric Vehicle Charging/Discharging Models for Estimation of Load Profile in Grid Environments
Kurukuru, V. S. B., Khan, M. A., & Singh, R. (2023) · Electric Power Components and Systems · doi:10.1080/15325008.2022.2146811 · Cited by 17 · cited 2×
“A novel modular integrated OBC for EV is presented in [118] making use of a full bridge bidirectional converter on the AC side and an isolated bidirectional SEPIC converter on the DC side.”
Self-citationElectric vehicle charging infrastructure
Tan, E. W. T. (2012) · DR-NTU (Nanyang Technological University) · Cited by 15
Muhammad, R., Kieu, H.-P., Park, J., Tat-Thang, L., Choi, S., Jung, H., & Yoon, B.-K. (2022) · 2022 IEEE Applied Power Electronics Conference and Exposition (APEC) · doi:10.1109/apec43599.2022.9773511 · Cited by 15 · cited 1×
“Seoul Tech in [117] present a single-stage OBC converter which is extremely compact and uses an interleaved dual active bridge (DAB) type of configuration.”
Nasr Esfahani, F., Darwish, A., & Ma, X. (2024) · Batteries · doi:10.3390/batteries10010017 · Cited by 13 · cited 1×
“By using WBG devices, there is no need for low-voltage series MOSFETs and fast-recovering parallel diodes [126].”
Praneeth, A. V. J. S., Patnaik, L., & Williamson, S. S. (2018) · IECON 2018 - 44th Annual Conference of the IEEE Industrial Electronics Society · doi:10.1109/iecon.2018.8591163 · Cited by 12 · cited 1×
“This Section provides a brief idea about the formulating bodies and types of standards that are currently in force [52–54].”
Yoon, Y. ‐., Kwon, S. ‐., & Lee, J. ‐. (2013) · Electronics Letters · doi:10.1049/el.2013.1850 · Cited by 11 · cited 3×
“In [102], for improving the topology presented in [99], a passive power factor correction (PFC) circuit to minimize the switching losses is introduced.”
InfluentialMishra, A. K., Singh, A. K., & Kim, T. (2020) · IET Power Electronics · doi:10.1049/iet-pel.2020.0003 · Cited by 9 · cited 1×
“The researchers in [106] have studied and proposed the use of nonlinear carrier control (NLCC) strategies.”
Power Losses Analysis and Efficiency Evaluation of an Electric Vehicle Conversion
Tavares, A. A., Fornasa, I., Luque, J. C. C., et al. (2018) · IEEE International Conference on Electrical Systems for Aircraft, Railway, Ship Propulsion and Road Vehicles & International Transportation Electrification Conference (ESARS-ITEC) · doi:10.1109/esars-itec.2018.8607322 · Cited by 8 · cited 2×
“Electric drivetrains are signi fi cantly more e ffi cient than internal combustion engines [8,9], converting a higher percentage of stored energy into motion, which translates to lower operational costs [10].”
Eficiencia energética en automoción: el vehículo eléctrico, un reto del presente
Blázquez, J., & Moreno, J. M. (2010) · Economía industrial · Cited by 5
State-of-the-art Charging Solutions for Electric Transportation and Autonomous E-mobility
Singh, S. A., Ronanki, D., Praneeth, A. V. J. S., & Williamson, S. S. (2018) · Renewable Energy and Sustainable Development · doi:10.21622/resd.2018.04.1.002 · Cited by 5 · cited 1×
“13 of 27 An EMI filter is used for filtering out the noises and provides protection against surges [76].”
GaN Based Converters for Battery Charging Application of Electric Vehicle
Das, M., & Bertilsson, K. (2019) · Proceedings of the Annual Conference of the IEEE Industrial Electronics Society · doi:10.1109/iecon.2019.8927651 · Cited by 4 · cited 1×
“Addressing these technical and infrastructural challenges is imperative for the broader acceptance of EVs [16,17].”
Considerations of Physical Design and Implementation for 5 MHz-100 W LLC Resonant DC-DC Converters
Hariya, A., Matsuura, K., Yanagi, H., Tomioka, S., Ishizuka, Y., & Ninomiya, T. (2016) · Active and Passive Electronic Components · doi:10.1155/2016/4027406 · Cited by 3 · cited 1×
“Hence, they are not applicable in a wide output voltage range [98].”
Research works printed but not linked: 2
- Foley, A., Winning, I., and Gallachóir, B.Ó. (September, January 31). Electric Vehicle: Infrastructure Regulatory Requirements. Proceedings of the Inaugural Conference of the Irish Transport Research Network (ITRN), Dublin, Ireland.
- Cui, H., and Hall, D. (2022). Annual Update on the Global Transition to Electric Vehicles: 2021, Proc. International Council of Clean Transportation.
Cited by
Electric Vehicles for a Flexible Energy System: Challenges and Opportunities
Micari, S., & Napoli, G. (2024) · Energies · doi:10.3390/en17225614 · Cited by 79
Soomro, H. A., Khir, M. H. M., Zulkifli, S. A. B. M., Abro, G. E. M., & Abualnaeem, M. M. (2025) · Results in Engineering · doi:10.1016/j.rineng.2025.104679 · Cited by 57
Ria, A., & Dini, P. (2024) · Energies · doi:10.3390/en17235992 · Cited by 37
Khekert, E. V., Malozyomov, B. V., Klyuev, R. V., Martyushev, N. V., Konyukhov, V. Y., Кукарцев, В. В., Alexandrovich, A. O., & Remezov, I. S. (2025) · World Electric Vehicle Journal · doi:10.3390/wevj16070391 · Cited by 25
“The main attention is paid to the application of the original three-stage 3PT/PN charging algorithm, which combines the advantages of a high charging rate and the prolongation of the battery life [26].”
Ezugwu, E. O., Bhattacharya, I., Ayomide, A. I., Dhason, M. V. A., Soyoye, B., & Banik, T. (2025) · World Electric Vehicle Journal · doi:10.3390/wevj16100573 · Cited by 30
Metadata
- Authors
- Dar, A. R., Haque, A., Khan, M. A., Kurukuru, V. S. B., & Mehfuz, S.
- Affiliations
- Jamia Millia Islamia (IN)
- University of Southern Denmark (DK)
- Silicon Austria Labs (Austria) (AT)
- Corresponding author
- Khan, Mohammed Ali
- Venue
- Energies
- Publisher
- MDPI AG
- Published
- 2024-09-10
- Volume
- 17
- Issue
- 18
- Pages
- 4534
- ISSN
- 1996-1073 (ISSN-L)
- OpenAlex
- W4402419610
- Cited by
- 45
- References
- 99
- Citations by year
- 2026: 20 · 2025: 22 · 2024: 3
- FWCI
- 4.67
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- Locations
- Energies (publishedVersion, cc-by)
- University of Southern Denmark Research Portal (University of Southern Denmark) (publishedVersion, cc-by)
- RePEc: Research Papers in Economics (submittedVersion)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion)
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Advanced DC-DC Converters
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Wireless Power Transfer Systems
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Electric Vehicles and Infrastructure
- Keywords
- on-board charger, electric vehicles, charging efficiency, power density, bidirectional charging, charging infrastructure, charging time
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
The claim verdicts this report counts are experimental: their accuracy is not yet measured.
A language model drew the claims from the paper on 2026-10-10, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).
A second model labelled each claim on 2026-10-10 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).
Cited sources are checked with a language model’s help (gpt-6-sol).
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.