Thermal Management of Wide-Bandgap Power Semiconductors: Strategies and Challenges in SiC and GaN Power Devices
Open accessThe DOI matches its Crossref record; 83 of the 83 references it cites were found in a registry or an index; 52 of the 266 sources its claims cite were checked for support.
Abstract
Wide-Bandgap (WBG) semiconductors—silicon carbide (SiC) and gallium nitride (GaN)— enable high-power-density conversion, but performance is limited by where heat is generated and how it is removed. This review links device-level loss mechanisms (conduction and switching, including output-capacitance hysteresis and dynamic on-resistance) to structure-driven hot spots within the ultra-thin (tens of nanometers) two-dimensional electron gas (2DEG) channel of GaN HEMTs and to thermal boundary resistance at layer interfaces. We compare wire-bondless package concepts—double-sided cooling, embedded packaging, and interleaved planar layouts—and survey system-level cooling that shortens the conduction path and raises heat-transfer coefficients. The impact on reliability is discussed using temperature-sensitive electrical parameters (e.g., on-state VDS, threshold voltage, drain leakage, di/dt, and gate current) for real-time junction-temperature estimation and compact electro-thermal RC models for remaining-useful-life prediction. Evidence from recent literature points to interface resistance in GaN-on-SiC as a primary bottleneck, while near-junction cooling and advanced packages are effective mitigations. We argue for integrated co-design—devices, packaging, electromagnetic interference (EMI)-aware layout, and cooling—together with interface engineering and health monitoring to deliver reliable, high-density WBG systems.
Overview
CoChat Summary
TL;DR
This review links device-level loss mechanisms and localized heating in SiC and GaN power devices to packaging, cooling, and reliability strategies. It argues that interface resistance, especially in GaN-on-SiC, is a primary bottleneck, and that integrated co-design across devices, packaging, EMI-aware layout, and cooling is needed for reliable high-density WBG systems.
Key findings
- SiC has high thermal conductivity of 3.3–4.9 W cm⁻¹ K⁻¹ (approximately 330–490 W m⁻¹ K⁻¹), while GaN thermal conductivity decreases with temperature; thermal boundary resistance (TBR) at GaN-on-SiC interfaces, increased by AlN buffer layers and interfacial defects, is identified as a significant thermal bottleneck.
- GaN CAVETs demonstrated approximately twice the switching speed and about one-third the switching loss of SiC MOSFETs; dynamic RDS(on) in GaN can increase monotonically from several hundred kHz up to approximately 2 MHz under hard-switching stress before saturating.
- Advanced packaging reduces thermal and parasitic limits: double-sided cooling with copper clips lowers thermal resistance by approximately 20% versus single-sided layouts; embedded packaging cuts parasitic inductance by up to 87.6% to 1.24 nH and, with substrate-embedded microchannels, drops junction temperature by approximately 50 °C and enables more than 22% higher saturation current; interleaved planar packaging reduces thermal coupling resistance by 57%, achieves loop inductance as low as 3.8 nH, lowers junction temperature by 20 °C, and maintains current imbalance within 6%.
- System-level cooling targets shorter conduction paths and higher heat-transfer coefficients: indirect liquid cooling has thermal resistance of 0.3–0.4 K cm² W⁻¹ versus an approximately 0.2 K cm² W⁻¹ target; embedded microchannels show up to 43% thermal-resistance reduction, jet impingement up to 64.3% versus indirect cooling, and direct liquid cooling approximately 30%; increasing via count from 4 to 25 reduced peak power-amplifier temperature by approximately 52% (from 492.956 °C to 234.836 °C).
Methods
- Review design: the paper synthesizes recent literature on WBG thermal generation, device structures, advanced packaging, system-level cooling, reliability, thermal modeling, and co-design, with no new experimental measurements reported.
- Patent analysis: it queried WIPS ON (accessed 4 September 2025, KST) for patent families filed in 2010–2025 using a Boolean query for SiC/GaN/WBG power devices and thermal-management/packaging terms; results were deduplicated by INPADOC family, assigned to earliest priority year, and mapped by first-priority country.
- Main analysis: it compares packaging and cooling techniques quantitatively where reported, discusses temperature-sensitive electrical parameters (TSEPs) and compact electro-thermal RC models for junction-temperature estimation and remaining-useful-life prediction, and selects representative patent families using claim-level relevance, age-normalized forward citations, and jurisdictional breadth/status filters.
Limitations
- The paper does not state a dedicated limitations section. It notes that the patent trend is directional due to publication lags.
- Evident from the text: as a review, it synthesizes prior literature and patent records rather than presenting primary experimental data, so reported quantitative improvements depend on the cited studies.
- Evident from the text: the patent analysis is bounded by the WIPS ON database, the 2010–2025 filing window, the specific Boolean query, INPADOC deduplication, and first-priority country assignment.
Model-written summary. Check it against the paper before relying on it.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
35 Valid · 21 Not valid · 73 Not checked · 41 Own results and interpretations
At least one cited source doesn’t support this claim or points to a different paper, and none confirmed it — see the verdicts below.
In the paper
“In GaN-based structures, TBR at the substrate interface becomes a significant thermal bottleneck; aluminum nitride (AlN) buffer layers and interfacial defects increase TBR, and acoustic-phonon scattering exacerbates this at elevated temperatures [7,8].”
What the sources say
- Not checked — no full text of the sourcecites [7] Mitterhuber, 2024, Correlation of Heat Transport Mechanism and Structural Properties of GaN High Electron Mobility Transistors, J. Appl. Phys. source
- Disputedcites [8] Wang, 2024, Simulation Investigation of Effects of Substrate and Thermal Boundary Resistance on Performances of AlGaN/GaN HEMTs, Phys. Scr. sourceExperimental — accuracy not yet measured
Section 3.2.2 (page unavailable) says that above the Debye temperature, increased anharmonic phonon scattering increases interfacial thermal conductance—opposite to the claimed worsening of thermal boundary resistance. The paper does not identify this high-temperature effect specifically as acoustic-phonon scattering. (LLM, conf=0.82)
Checked by a reasoning model — may be wrong.
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“GaN's thermal conductivity decreases with temperature [2,6].”
What the sources say
- Could not verifycites [2] Kimoto, 2015, Material Science and Device Physics in SiC Technology for High-Voltage Power Devices, Jpn. J. Appl. Phys. sourceExperimental — accuracy not yet measured
The Introduction mentions GaN as a wide-bandgap semiconductor, but does not discuss its thermal conductivity. Searches for GaN thermal conductivity and its temperature dependence found no passage in our copy addressing the claimed decrease. (LLM, conf=0.73)
- Supportedcites [6] Zheng, 2019, Thermal Conductivity of GaN, AlN, and SiC from 150 K to 850 K, Phys. Rev. Mater. source
The Results and discussion passage reports that measured GaN thermal conductivity follows a negative power of temperature from 300 to 850 K. It therefore decreases as temperature rises over that reported range; the copy does not establish the same trend at every possible temperature. (LLM, conf=0.92)
states a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Could not verify
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“Accordingly, WBG semiconductors are positioned to overcome key constraints of Si technologies in electric vehicles, aerospace, and renewable energy [2,3].”
What the sources say
- Partly supportedcites [2] Kimoto, 2015, Material Science and Device Physics in SiC Technology for High-Voltage Power Devices, Jpn. J. Appl. Phys. sourceExperimental — accuracy not yet measured
The Introduction (page not available) says Si technology is mature and difficult to improve substantially, while identifying electric and hybrid vehicles as applications for power devices. The Introduction and §2 describe advantages of wide-bandgap SiC for high-voltage, low-loss devices. Our copy does not specifically connect those advantages to aerospace or renewable-energy applications, so the full list of settings is not supported by this source. (LLM, conf=0.86)
- Not checked — no full text of the sourcecites [3] Mishra, 2002, AlGaN/GaN HEMTs—An Overview of Device Operation and Applications, Proc. IEEE source
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Partly supported
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“In GaN-based structures, TBR at the substrate interface becomes a significant thermal bottleneck; aluminum nitride (AlN) buffer layers and interfacial defects increase TBR, and acoustic-phonon scattering exacerbates this at elevated temperatures [7,8].”
What the sources say
- Not checked — no full text of the sourcecites [7] Mitterhuber, 2024, Correlation of Heat Transport Mechanism and Structural Properties of GaN High Electron Mobility Transistors, J. Appl. Phys. source
- Partly supportedcites [8] Wang, 2024, Simulation Investigation of Effects of Substrate and Thermal Boundary Resistance on Performances of AlGaN/GaN HEMTs, Phys. Scr. sourceExperimental — accuracy not yet measured
Section 3.2.1 (page unavailable) says that interfacial layers and crystal defects near GaN/substrate interfaces contribute to TBR, supporting the interfacial-defects part of the claim. It does not identify those layers as AlN buffer layers or say that AlN buffers increase TBR; the AlN/Si discussion in section 3.2.2 instead concerns phonon bridges that contribute to thermal conductance. (LLM, conf=0.88)
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
The sources with a verdict support this claim; the rest weren’t checked yet, have no full text we could read, or their verdicts aren’t rated yet.
In the paper
“In GaN-based structures, TBR at the substrate interface becomes a significant thermal bottleneck; aluminum nitride (AlN) buffer layers and interfacial defects increase TBR, and acoustic-phonon scattering exacerbates this at elevated temperatures [7,8].”
What the sources say
- Not checked — no full text of the sourcecites [7] Mitterhuber, 2024, Correlation of Heat Transport Mechanism and Structural Properties of GaN High Electron Mobility Transistors, J. Appl. Phys. source
- Supportedcites [8] Wang, 2024, Simulation Investigation of Effects of Substrate and Thermal Boundary Resistance on Performances of AlGaN/GaN HEMTs, Phys. Scr. source
The Introduction states that high thermal boundary resistance between the GaN layer and substrate seriously hinders heat dissipation. Section 3.2.1 reports that, at high TBR, the interface blocks heat transfer even when the substrate is highly conductive. (LLM, conf=0.94)
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
75 more claims · 17 with their cited sources checked
Create a free account to see all 170 claims and every source verdict.
- Borderline: one of the tests for a substantial claim is unclear. 3
- It may state two separate claims as one. 73
- Probably not a substantial claim. 22
Citations
Cites
A Survey of Wide Bandgap Power Semiconductor Devices
Millán, J., Godignon, P., Perpiñà, X., Pérez-Tomás, A., & Rebollo, J. (2014) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2013.2268900 · Cited by 2,685 · cited 10×
“Devices utilizing SiC and GaN as WBG materials offer high efficiency and high-voltage capability; however, heat generation can concentrate in specific regions, limiting maximum power density and reducing lifetime [1].”
InfluentialAlGaN/GaN HEMTs—An Overview of Device Operation and Applications
Mishra, U. K., Parikh, P., & Wu, Y.-F. (2002) · Proceedings of the IEEE · doi:10.1109/jproc.2002.1021567 · Cited by 2,312 · cited 5×
“Copper-sintered joints offer comparable performance with improved EM resistance, though oxidation control and process windows remain nontrivial [1–3, 31, 36– 38].”
InfluentialMaterial Science and Device Physics in SiC Technology for High-Voltage Power Devices
Kimoto, T. (2015) · Japanese Journal of Applied Physics · doi:10.7567/jjap.54.040103 · Cited by 1,176 · cited 10×
“GaN-on-Diamond can further reduce channel temperature owing to the diamond substrate’s thermal conductivity exceeding 700 W m − 1 K − 1 , thereby enhancing both performance and lifetime [1,2,28,29].”
InfluentialReliability of GaN High-Electron-Mobility Transistors: State of the Art and Perspectives
Meneghesso, G., Verzellesi, G., Danesin, F., Rampazzo, F., Zanon, F., Tazzoli, A., Meneghini, M., & Zanoni, E. (2008) · IEEE Transactions on Device and Materials Reliability · doi:10.1109/tdmr.2008.923743 · Cited by 675 · cited 4×
“In particular, transconductance degradation and gate lag are observed under “semi-ON” operating conditions, and the EL technique enables real-time evaluation of hot-carrier distributions [19,64].”
InfluentialA Review of SiC Power Module Packaging Technologies: Challenges, Advances, and Emerging Issues
Lee, H., Smet, V., & Tummala, R. (2020) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2019.2951801 · Cited by 526 · cited 4×
“DSC has been widely implemented in SiC MOSFET high-power modules and is considered essential for extending device lifetime under high thermal loads [26,41–44].”
InfluentialBuffolo, M., Favero, D., Marcuzzi, A., De Santi, C., Meneghesso, G., Zanoni, E., & Meneghini, M. (2024) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2023.3346369 · Cited by 476 · cited 1×
“SiC and GaN can operate under high-voltage and high-temperature conditions thanks to their Wide-Bandgaps (2.9–3.4 eV) and critical electric field strengths (2.2–4 MV cm − 1 ), outperforming conventional Si in these regimes [2–5].”
InfluentialMa, K., Liserre, M., Blaabjerg, F., & Kerekes, T. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2014.2312335 · Cited by 460 · cited 6×
“Conventional manual inspections are limited, especially under high switching density and elevated temperatures, motivating the development of active health monitoring technologies [64,65].”
InfluentialSelf-Heating in High-Power AlGaN-GaN HFETs
Gaska, R., Osinsky, A., Yang, J. W., & Shur, M. S. (1998) · IEEE Electron Device Letters · doi:10.1109/55.661174 · Cited by 301 · cited 1×
“In contrast, GaN HEMTs conduct current through a two-dimensional electron gas (2DEG) formed within the AlGaN/GaN heterostructure, focusing conduction losses into an ultrathin channel and thereby intensifying localized heating [1,3,16,17].”
Hanif, A., Yu, Y., DeVoto, D., & Khan, F. (2019) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2018.2860587 · Cited by 272 · cited 2×
“Rep-resentative TSEPs include V DS ( on ) , V th , I dss , Miller plateau voltage, dI / dt , and I gp , which can also signal potential failure or package degradation [64,71–74].”
Sarua, A., Ji, H., Kuball, M., Uren, M. J., Martin, T., Hilton, K. P., & Balmer, R. S. (2006) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2006.882274 · Cited by 267 · cited 1×
“Electroluminescence (EL) imaging confirms this, showing localized emission in field-crowding regions consistent with trap formation and current reduction [21].”
Overview of Real-Time Lifetime Prediction and Extension for SiC Power Converters
Ni, Z., Lyu, X., Yadav, O. P., Singh, B. N., Zheng, S., & Cao, D. (2020) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2019.2962503 · Cited by 261 · cited 10×
“Rep-resentative TSEPs include V DS ( on ) , V th , I dss , Miller plateau voltage, dI / dt , and I gp , which can also signal potential failure or package degradation [64,71–74].”
InfluentialThe Study of Self-Heating and Hot-Electron Effects for AlGaN/GaN Double-Channel HEMTs
Wang, X.-D., Hu, W.-D., Chen, X.-S., & Lu, W. (2012) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2012.2188634 · Cited by 210 · cited 1×
“They are prone to hotspots in the gate-drain region, where high electric fields lead to hot-electron effects, trap generation, and the reverse piezoelectric effect, degrading performance and reliability [18–20] (Figure 1).”
Reliability assessment of sintered nano-silver die attachment for power semiconductors
Knoerr, M., Kraft, S., & Schletz, A. (2010) · 2010 12th Electronics Packaging Technology Conference · doi:10.1109/eptc.2010.5702605 · Cited by 184 · cited 1×
“Silver-sintered joints provide excellent electrical/thermal conductivity and high-temperature stability but face electromigration (EM) and cost challenges [2,30–35].”
High-Temperature Operation of SiC Power Devices by Low-Temperature Sintered Silver Die-Attachment
Bai, J. G., Yin, J., Zhang, Z., Lu, G.-Q., & van Wyk, J. D. (2007) · IEEE Transactions on Advanced Packaging · doi:10.1109/tadvp.2007.898628 · Cited by 177
Thermal conductivity of GaN, GaN71 , and SiC from 150 K to 850 K
Zheng, Q., Li, C., Rai, A., Leach, J. H., Broido, D. A., & Cahill, D. G. (2019) · Physical Review Materials · doi:10.1103/physrevmaterials.3.014601 · Cited by 177 · cited 1×
“GaN’s thermal conductivity decreases with temperature [2,6].”
High Thermal Boundary Conductance across Bonded Heterogeneous GaN—SiC Interfaces
Mu, F., Cheng, Z., Shi, J., Shin, S., Xu, B., Shiomi, J., Graham, S., & Suga, T. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b10106 · Cited by 159
A Review of High-Speed GaN Power Modules: State of the Art, Challenges, and Solutions
Emon, A. I., Mustafeez-ul-Hassan, Mirza, A. B., Kaplun, J., Vala, S. S., & Luo, F. (2023) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2022.3232265 · Cited by 151 · cited 1×
“By contrast, losses associated with output capacitance ( C OSS ), gate charge, and voltage overshoot from parasitic inductance are often more significant [4,12,13].”
A Physical RC Network Model for Electrothermal Analysis of a Multichip SiC Power Module
Li, J., Castellazzi, A., Eleffendi, M. A., Gurpinar, E., Johnson, C. M., & Mills, L. (2018) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2017.2697959 · Cited by 105 · cited 1×
“In electro-thermal simulations, FEM-derived compact RC electro-thermal network models predict T j dynamics and support RUL assessment [68,69,78].”
van Erp, R., Kampitsis, G., & Matioli, E. (2020) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2019.2959736 · Cited by 97
Liquid Jet Impingement Cooling of a Silicon Carbide Power Conversion Module for Vehicle Applications
Gould, K., Cai, S. Q., Neft, C., & Bhunia, A. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2014.2331562 · Cited by 93 · cited 4×
“…R th reduction: up to 64.3% (vs. indirect) [52] • Very high HTC • Effective direct hotspot cooling [52,53] • High pumping power required ( ∼ 5 × ) [52] • Increased system complexity • Potential leakage risk • Enables near-junction cooling • Shortens thermal path [29] • High fabrication complexity…”
InfluentialComparison of Wide-Band-Gap Technologies for Soft-Switching Losses at High Frequencies
Jafari, A., Nikoo, M. S., Perera, N., Yildirim, H. K., Karakaya, F., Soleimanzadeh, R., & Matioli, E. (2020) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2020.2990628 · Cited by 92 · cited 2×
“Realizing these device-level advantages at the system level, however, requires a multidisciplinary co-design approach that jointly considers device physics, packaging, circuit topologies, gate drivers, EMI filters, and cooling—beyond optimizing isolated components [10–12 ,27, 80, 81].”
Kim, D., Nagao, S., Chen, C., Wakasugi, N., Yamamoto, Y., Suetake, A., Takemasa, T., Sugahara, T., & Suganuma, K. (2021) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2020.3031670 · Cited by 87 · cited 2×
“Traditional Sn-based solders are constrained by relatively low melting points and intermetallic compound (IMC) formation [30], motivating high-reliability alternatives [31].”
Yang, F., Lixin, J., Wang, L., Zhang, F., Wang, B., Zhao, C., Wang, J., Bayer, C., & Ferreira, J. (2022) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2021.3106316 · Cited by 80 · cited 7×
“Experiments at elevated temperature show a 20 ◦ C [40] lower junction temperature relative to conventional planar packaging, while maintaining current imbalance within 6% [40].”
InfluentialA Compact Double-Sided Cooling 650V/30A GaN Power Module With Low Parasitic Parameters
Li, B., Yang, X., Wang, K., Zhu, H., Wang, L., & Chen, W. (2022) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2021.3092367 · Cited by 79
Pela, R. R., Hsiao, C.-L., Hultman, L., Birch, J., & Gueorguiev, G. K. (2024) · Physical Chemistry Chemical Physics · doi:10.1039/d3cp05295h · Cited by 75 · cited 1×
“Fundamentally, understanding the link between such structural defects and the resulting electronic and thermal properties often relies on atomistic modeling approaches like Density Functional Theory (DFT) [63].”
A Numerical Study on Comparing the Active and Passive Cooling of AlGaN/GaN HEMTs
Chen, X., Donmezer, F. N., Kumar, S., & Graham, S. (2014) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2014.2360504 · Cited by 75
Review of Topside Interconnections for Wide Bandgap Power Semiconductor Packaging
Wang, L., Wang, W., Hueting, R. J. E., Rietveld, G., & Ferreira, J. A. (2023) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2022.3200469 · Cited by 73 · cited 6×
“Copper-clip structures reduce thermal resistance by approximately 20% [27] versus single-sided layouts, while flip-chip bonding further mitigates parasitic inductance.”
InfluentialTransient Thermal Performance of IGBT Power Modules Attached by Low-Temperature Sintered Nanosilver
Chen, G., Han, D., Mei, Y.-H., Cao, X., Wang, T., Chen, X., & Lu, G.-Q. (2012) · IEEE Transactions on Device and Materials Reliability · doi:10.1109/tdmr.2011.2173573 · Cited by 71 · cited 1×
“…accelerated by microstructural defects at the solder interface (e.g., grain boundaries, oxides, interfacial roughness), which act as heterogeneous nucleation sites; in addition, unbalanced Cu/Sn interdiffusion can induce Kirkendall voiding, degrading thermo-mechanical integrity over life [30,32].”
Pressureless Sintered-Silver Die-Attach at 180 °C for Power Electronics Packaging
Wang, M., Mei, Y.-H., Jin, J., Chen, S., Li, X., & Lu, G.-Q. (2021) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2021.3074853 · Cited by 69
A Review of GaN HEMT Dynamic On-Resistance and Dynamic Stress Effects on Field Distribution
Gill, L., DasGupta, S., Neely, J. C., Kaplar, R. J., & Michaels, A. J. (2024) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2023.3318182 · Cited by 68 · cited 1×
“These factors make loss separation and quantification in GaN and SiC devices highly non-trivial [14,15].”
Cooling Limits for GaN HEMT Technology
Won, Y., Cho, J., Agonafer, D., Asheghi, M., & Goodson, K. E. (2013) · 2013 IEEE Compound Semiconductor Integrated Circuit Symposium (CSICS) · doi:10.1109/csics.2013.6659222 · Cited by 57 · cited 1×
“Consequently, accurate temperature-field mapping and structure-aware thermal analysis are essential for devising effective cooling strategies and ensuring reliability, as localized hotspots degrade performance and can trigger failure [18,24].”
Review of Die-Attach Materials for SiC High-Temperature Packaging
Hou, F., Sun, Z., Su, M., Fan, J., You, X., Li, J., Wang, Q., Cao, L., & Zhang, G. (2024) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2024.3417529 · Cited by 52 · cited 3×
“Silver-sintered joints provide excellent electrical/thermal conductivity and high-temperature stability but face electromigration (EM) and cost challenges [2,30–35].”
Schrock, J. A., Ray II, W. B., Lawson, K., Bilbao, A., Bayne, S. B., Holt, S. L., Cheng, L., Palmour, J. W., & Scozzie, C. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2014.2357013 · Cited by 43
PCB-on-DBC GaN Power Module Design with High-Density Integration and Double-Sided Cooling
Tian, X., Jia, N., DeVoto, D., Paret, P., Bai, H., Tolbert, L. M., & Cui, H. (2024) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2023.3311440 · Cited by 40 · cited 1×
“DSC has been widely implemented in SiC MOSFET high-power modules and is considered essential for extending device lifetime under high thermal loads [26,41–44].”
Review of SiC MOSFET based three-phase inverter lifetime prediction
Ni, Z., Lyu, X., Yadav, O. P., & Cao, D. (2017) · 2017 IEEE Applied Power Electronics Conference and Exposition (APEC) · doi:10.1109/apec.2017.7930819 · Cited by 40 · cited 1×
“While the advantages of WBG semiconductors such as SiC and GaN are well established, ensuring their long-term reliability and accurately forecasting their operational lifespan remain critical challenges [1,2,59].”
Microchannel cooling strategies for high heat flux (1 kW/cm2) power electronic applications
Jung, K. W., Kharangate, C. R., Lee, H., Palko, J., Zhou, F., Asheghi, M., Dede, E. M., & Goodson, K. E. (2017) · 2017 16th IEEE Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (ITherm) · doi:10.1109/itherm.2017.7992457 · Cited by 39 · cited 2×
“…near-junction cooling • Shortens thermal path [29] • High fabrication complexity and cost • Large pressure drop • Potential channel clogging [55] • High-frequency RF amplifiers (e.g., GaN MMIC) • Dense power modules [29] Direct Liquid • R th reduction: ≈ 30% (vs. indirect) [51] • Eliminates…”
Morozumi, A., Hokazono, H., Nishimura, Y., Ikeda, Y., Nabetani, Y., & Takahashi, Y. (2013) · 2013 25th International Symposium on Power Semiconductor Devices & IC's (ISPSD) · doi:10.1109/ispsd.2013.6694408 · Cited by 38 · cited 3×
“…clogging [55] • High-frequency RF amplifiers (e.g., GaN MMIC) • Dense power modules [29] Direct Liquid • R th reduction: ≈ 30% (vs. indirect) [51] • Eliminates TIM layer • Improved heat-transfer efficiency [50] • CTE mismatch risk • Potential leakage and corrosion risk [50] • Automotive…”
Embedded Microchannel Cooling for High Power-Density GaN-on-Si Power Integrated Circuits
Erp, R. V., Kampitsis, G., Nela, L., Ardebili, R. S., & Matioli, E. (2020) · 2020 19th IEEE Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (ITherm) · doi:10.1109/itherm45881.2020.9190356 · Cited by 33
Wu, X., Yang, X., Ye, J., & Liu, G. (2025) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2024.3498350 · Cited by 32 · cited 1×
“For example, Wu et al. proposed a wire-bond degradation model that accounts for the different temperature swings experienced by individual bond wires, enabling more precise RUL estimation by modeling the progressive failure of multiple wires rather than only the first one [76].”
Mouawad, B., Skuriat, R., Li, J., Johnson, C. M., & DiMarino, C. (2018) · 2018 IEEE 30th International Symposium on Power Semiconductor Devices and ICs (ISPSD) · doi:10.1109/ispsd.2018.8393651 · Cited by 31 · cited 1×
“Jet impingement cooling uses high-speed jets from micro-nozzles to target hotspots, achieving high HTC; it is effective for thermally demanding devices such as GaN monolithic microwave integrated circuit (MMIC) power amplifiers [29,52–54].”
Lu, D., Ye, Y., Liu, R., Wu, M., Du, X., Yu, L., Qiao, J., Liu, Z., Kong, Y., Jiao, B., et al. (2024) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2023.3338586 · Cited by 30 · cited 10×
“…power required ( ∼ 5 × ) [52] • Increased system complexity • Potential leakage risk • Enables near-junction cooling • Shortens thermal path [29] • High fabrication complexity and cost • Large pressure drop • Potential channel clogging [55] • High-frequency RF amplifiers (e.g., GaN MMIC) •…”
InfluentialXu, Y., Ho, C. N. M., Ghosh, A., & Muthumuni, D. (2021) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2021.3058227 · Cited by 29 · cited 3×
“In electro-thermal simulations, FEM-derived compact RC electro-thermal network models predict T j dynamics and support RUL assessment [68,69,78].”
Direct liquid cooling of high performance Silicon Carbide (SiC) power modules
McPherson, B., McGee, B., Simco, D., Olejniczak, K., & Passmore, B. (2017) · 2017 IEEE International Workshop On Integrated Power Packaging (IWIPP) · doi:10.1109/iwipp.2017.7936760 · Cited by 29
A Novel Real-Time Junction Temperature Monitoring Circuit for SiC MOSFET
Yu, H., Jiang, X., Chen, J., Wang, J., & Shen, Z. J. (2020) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec39645.2020.9124486 · Cited by 27
Development of a Novel Lead Frame Based Double Side Liquid Cooling High Performance SiC Power Module
Tang, G., Wai, L. C., Lim, S. B., Ye, Y. L., Lau, B. L., Yamamoto, K., & Zhang, X. (2021) · 2021 IEEE 71st Electronic Components and Technology Conference (ECTC) · doi:10.1109/ectc32696.2021.00031 · Cited by 27 · cited 1×
“DSC has been widely implemented in SiC MOSFET high-power modules and is considered essential for extending device lifetime under high thermal loads [26,41–44].”
McPherson, J. W. (2018) · 2018 IEEE International Reliability Physics Symposium (IRPS) · doi:10.1109/irps.2018.8353556 · Cited by 24 · cited 1×
“Consequently, the development of WBG-specific qualification methodologies is an active area of focus for industry bodies, in-Electronics cluding the JEDEC JC-70 committee [66].”
Abd El-Azeem, S. M., & El-Ghanam, S. M. (2020) · Cryogenics · doi:10.1016/j.cryogenics.2020.103071 · Cited by 23
Temperature Dependent Thermal Resistances at GaN-Substrate Interfaces in GaN Composite Substrates
Cho, J., Li, Y., Altman, D. H., Hoke, W. E., Asheghi, M., & Goodson, K. E. (2012) · 2012 IEEE Compound Semiconductor Integrated Circuit Symposium (CSICS) · doi:10.1109/csics.2012.6340094 · Cited by 22
Zheng, X., Pomeroy, J. W., Jindal, G., & Kuball, M. (2024) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2024.3367309 · Cited by 21 · cited 1×
“Analytical methods such as coupled electro-thermal analysis, lumped thermal models (LTM), and the finite element method (FEM) are used to predict T j and identify hotspots [64,68–70].”
Yang, X., Liu, J., Wang, B., & Zhang, G. (2022) · 2022 IEEE Applied Power Electronics Conference and Exposition (APEC) · doi:10.1109/apec43599.2022.9773378 · Cited by 18 · cited 1×
“Extended defects such as micropipes, basal plane dislocations (BPDs), and stacking faults increase leakage current and reduce breakdown voltage [60–62], while deep-level point defects (such as the Z1/2 and EH6/7 centers) act as carrier recombination centers that shorten carrier lifetime [2].”
Tang, Y., Zhan, C., Zhu, L., Wang, W., Gou, Y., & Ji, S. (2025) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2024.3470907 · Cited by 18 · cited 1×
“Thermal stress accounts for approximately 60% of primary failure causes [67], and accurate estimation of junction temperature ( T j ) is essential for reliable lifetime prediction.”
Islam, M. M., Rahman, M. A., & Islam, M. R. (2021) · IEEE Transactions on Energy Conversion · doi:10.1109/tec.2020.3000596 · Cited by 16 · cited 1×
“…a comprehensive thermal-aware design strategy—combining PoF-based lifetime models, TSEP-based temperature estimation, thermal-path optimization, and integrated modeling—is essential for early detection of failure mechanisms and for ensuring the reliability of thermally sensitive WBG devices [79].”
An Embedded GaN Power Module with Double-Sided Cooling and High-Density Integration
Tian, X., Jia, N., Chertkovsky, D. B., Sun, J., Bai, H., Tolbert, L. M., & Cui, H. (2022) · 2022 IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce50734.2022.9947786 · Cited by 15
Monolithic Integrated Micro-Thin-Film Thermocouples for On-Chip Temperature Measurement of GaN HEMTs
Irshad Bhatti, H., Yuvaraja, S., Wang, C., Tang, X., & Li, X. (2024) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2024.3487815 · Cited by 13 · cited 3×
“They are prone to hotspots in the gate-drain region, where high electric fields lead to hot-electron effects, trap generation, and the reverse piezoelectric effect, degrading performance and reliability [18–20] (Figure 1).”
Study and Application of Nano Copper Sintering Technology in Power Electronics Packaging
Liu, X., Zhou, Q., Zhao, X., Koh, S. W., Ye, H., & Zhang, G. (2021) · 2021 IEEE 71st Electronic Components and Technology Conference (ECTC) · doi:10.1109/ectc32696.2021.00304 · Cited by 12
Design and Optimization of 650V/60A Double-Sided Cooled Multichip GaN Module
Emon, A. I., Carlton, H., Harris, J., Krone, A., Mirza, A., Hassan, M., Yuan, Z., Huitink, D., & Luo, F. (2021) · 2021 IEEE Applied Power Electronics Conference and Exposition (APEC) · doi:10.1109/apec42165.2021.9487307 · Cited by 11 · cited 3×
“Realizing these device-level advantages at the system level, however, requires a multidisciplinary co-design approach that jointly considers device physics, packaging, circuit topologies, gate drivers, EMI filters, and cooling—beyond optimizing isolated components [10–12 ,27, 80, 81].”
Mitterhuber, L., Kosednar-Legenstein, B., Vohra, A., Borga, M., Posthuma, N., & Kraker, E. (2024) · Journal of Applied Physics · doi:10.1063/5.0207513 · Cited by 11 · cited 1×
“In GaN-based structures, TBR at the substrate interface becomes a significant thermal bottleneck; aluminum nitride (AlN) buffer layers and inter-facial defects increase TBR, and acoustic-phonon scattering exacerbates this at elevated temperatures [7,8].”
Li, X., Deng, X., Liao, Z., Li, X., Jia, R., & Zhang, B. (2025) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2024.3524371 · Cited by 11 · cited 1×
“Extended defects such as micropipes, basal plane dislocations (BPDs), and stacking faults increase leakage current and reduce breakdown voltage [60–62], while deep-level point defects (such as the Z1/2 and EH6/7 centers) act as carrier recombination centers that shorten carrier lifetime [2].”
Zhang, C., Liu, X., Li, J., Song, G., & Ye, H. (2020) · 2020 21st International Conference on Electronic Packaging Technology (ICEPT) · doi:10.1109/icept50128.2020.9202912 · Cited by 10 · cited 1×
“The embedded paradigm also provides inherent electromagnetic interference (EMI) shielding and significantly improves robustness against thermal cycling and electrical overstress [29,45–49].”
Lu, X., & Wang, L. (2025) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2025.3546712 · Cited by 10
Chen, W., Yan, X., Ibrahim, M. S., Meda, A. H., Fan, X., Zhang, G., & Fan, J. (2023) · 2023 IEEE 73rd Electronic Components and Technology Conference (ECTC) · doi:10.1109/ectc51909.2023.00344 · Cited by 8 · cited 1×
“Realizing these device-level advantages at the system level, however, requires a multidisciplinary co-design approach that jointly considers device physics, packaging, circuit topologies, gate drivers, EMI filters, and cooling—beyond optimizing isolated components [10–12 ,27, 80, 81].”
Understanding the Thermal Characteristics of SiC Power MOSFET Device for Power Modules Design
Cui, H., Li, B., Kong, H., Yang, F., Wang, F., Wang, L., & Gao, K. (2023) · 2023 IEEE 14th International Symposium on Power Electronics for Distributed Generation Systems (PEDG) · doi:10.1109/pedg56097.2023.10215269 · Cited by 8
Murat Sezer, M., Akici, F., Afshar, M., Teja Vankayalapati, B., & Akin, B. (2025) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2025.3546928 · Cited by 8 · cited 1×
“Data-driven methods use empirical TSEP streams and operational histories to improve lifetime-prediction accuracy, leveraging machine learning, dynamic Bayesian networks (DBN), and dynamic reliability block diagrams (DRBD) [65,75].”
Barón, K. M., Sharma, K., Nitzsche, M., & Kallfass, I. (2021) · IEEE Workshop on Wide Bandgap Power Devices and Applications · doi:10.1109/wipda49284.2021.9645118 · Cited by 8
Switching losses in power devices: From dynamic on resistance to output capacitance hysteresis
Matioli, E., Zhu, H., Perera, N., Nikoo, M. S., Jafari, A., & van Erp, R. (2023) · 2023 25th European Conference on Power Electronics and Applications (EPE'23 ECCE Europe) · doi:10.23919/epe23ecceeurope58414.2023.10264510 · Cited by 6
Transient thermal impedance modeling of semiconductor heat sinking
Sueker, K. H. (2002) · Conference Record of the 1993 IEEE Industry Applications Conference Twenty-Eighth IAS Annual Meeting · doi:10.1109/ias.1993.299072 · Cited by 6
Wang, K., Hu, W., Wu, S., Wang, H., Padhiar, M. A., & Ji, Y. (2024) · Physica Scripta · doi:10.1088/1402-4896/ad4b69 · Cited by 5 · cited 1×
“In GaN-based structures, TBR at the substrate interface becomes a significant thermal bottleneck; aluminum nitride (AlN) buffer layers and inter-facial defects increase TBR, and acoustic-phonon scattering exacerbates this at elevated temperatures [7,8].”
Switching Power MOSFET Performance: A Compromise Between EMI Generation and Thermal Consideration
Blanchette, H., & Al-Haddad, K. (2006) · 2006 IEEE International Symposium on Industrial Electronics · doi:10.1109/isie.2006.295659 · Cited by 4 · cited 1×
“Realizing these device-level advantages at the system level, however, requires a multidisciplinary co-design approach that jointly considers device physics, packaging, circuit topologies, gate drivers, EMI filters, and cooling—beyond optimizing isolated components [10–12 ,27, 80, 81].”
Single and Double-Sided Jet Impingement Cooling for SiC-Based Power Modules
Barua, H., Chowdhury, S., Wilkins, J., & Ozpineci, B. (2023) · 2023 IEEE 10th Workshop on Wide Bandgap Power Devices & Applications (WiPDA) · doi:10.1109/wipda58524.2023.10382234 · Cited by 4 · cited 1×
“…multi-chip modules [40] Jet Impingement • R th reduction: up to 64.3% (vs. indirect) [52] • Very high HTC • Effective direct hotspot cooling [52,53] • High pumping power required ( ∼ 5 × ) [52] • Increased system complexity • Potential leakage risk • Enables near-junction cooling • Shortens…”
InfluentialWang, J., Liu, Z., Peng, H., & Ren, X. (2024) · 2024 25th International Conference on Electronic Packaging Technology (ICEPT) · doi:10.1109/icept63120.2024.10668604 · Cited by 4
Tang, Y., Zhu, L., Zhan, C., Wang, W., & Ji, S. (2024) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce55643.2024.10861062 · Cited by 4
A Multi-Currents Method for Junction Temperature Separation of Cascode GaN
Wu, L., Deng, E., Wang, Y., Xu, S., Hua, W., Yang, S., & Ding, L. (2024) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2024.3424893 · Cited by 3 · cited 1×
“Even cascode GaN devices—which stack a GaN HEMT and a Si MOSFET to reduce parasitics—introduce a complex thermal path that can elevate junction temperature and must be managed carefully [22,23]. showing the AlGaN/GaN heterostructure and key device regions [1].”
Rahman, M. D., Hasan, A. S. M. K., Mantooth, H. A., & Song, X. (2024) · 2024 IEEE 11th Workshop on Wide Bandgap Power Devices & Applications (WiPDA) · doi:10.1109/wipda62103.2024.10773107 · Cited by 3 · cited 1×
“Even cascode GaN devices—which stack a GaN HEMT and a Si MOSFET to reduce parasitics—introduce a complex thermal path that can elevate junction temperature and must be managed carefully [22,23]. showing the AlGaN/GaN heterostructure and key device regions [1].”
Vertical Thermal Design and Modeling for Integrated Power Amplifier WBLGA SiP Packaging
Li, B., Li, D., Li, D., Yang, B., Gong, B., Han, S., Su, B., Deng, Y., & Yang, D. (2024) · 2024 25th International Conference on Electronic Packaging Technology (ICEPT) · doi:10.1109/icept63120.2024.10668561 · Cited by 3 · cited 1×
“For example, increasing the via count from 4 to 25 reduced the peak temperature of the power amplifier by approximately 52% (from 492.956 ◦ C to 234.836 ◦ C) [77].”
InfluentialZhu, G., Zhang, L., Hou, Z., Wang, Y., Liang, L., & Mei, Y. (2024) · 2024 25th International Conference on Electronic Packaging Technology (ICEPT) · doi:10.1109/icept63120.2024.10668703 · Cited by 3
New GaN Power-Electronics Packaging Solutions: A Thermal Analysis Using Raman Thermography
Faqir, M., Manoi, A., Mrotzek, T., Knippscheer, S., Massiot, M., Buchta, M., Blanck, H., Rochette, S., Vendier, O., & Kuball, M. (2011) · Journal of Microelectronics and Electronic Packaging · doi:10.4071/imaps.297 · Cited by 2
An Introduction to Wire-Bondless Discrete GaN Power Packages With Top-Side Cu Sinterconnects®
Ain, K. N., Zhang, G. Q., Rodrigues, A., Hasan, M. N., Holzmann, D., Geens, K., Chatterjee, U., & Roshanghias, A. (2024) · 2024 IEEE 10th Electronics System-Integration Technology Conference (ESTC) · doi:10.1109/estc60143.2024.10712025 · Cited by 2 · cited 2×
“The constraints arise from three factors: substantial parasitic inductance, restricted vertical heat removal, and reduced reliability under thermomechanical stress—all of which degrade performance and lifetime [25–27 , 40].”
Priyadarshini, S., Sridutt, L., Prakash, S., Gunasekaran, K., & Samikannu, R. (2024) · 2024 3rd Odisha International Conference on Electrical Power Engineering, Communication and Computing Technology (ODICON) · doi:10.1109/odicon62106.2024.10797485 · Cited by 2 · cited 1×
“By contrast, losses associated with output capacitance ( C OSS ), gate charge, and voltage overshoot from parasitic inductance are often more significant [4,12,13].”
Accurate Temperature Measurement of Active Area for Wide-Bandgap Power Semiconductors
Ramyar, A., Lou, Y., & Avestruz, A.-T. (2023) · 2023 IEEE 24th Workshop on Control and Modeling for Power Electronics (COMPEL) · doi:10.1109/compel52896.2023.10221096 · Cited by 1 · cited 2×
“This heteroepitaxy yields high TBR at the interface, which raises channel temperature and complicates operation at high power densities [16].”
Nakamura, K., Shigematsu, K., Imaoka, J., & Yamamoto, M. (2023) · 2023 IEEE CPMT Symposium Japan (ICSJ) · doi:10.1109/icsj59341.2023.10339574 · Cited by 1 · cited 2×
“• High-frequency DC/DC • Integrated power systems [45] Interleaved Planar • Thermal coupling reduction: ∼ 57% • L p as low as 3.8nH [40] • Balances current/temperature in parallel devices • Mitigates 2D thermal coupling [40] • High structural complexity • Potential manufacturability challenges •…”
Compact Spatially Symmetric Double-Sided Embedded Packaging Method for Parallel SiC MOSFETs
Zhu, M., Wang, L., Pei, Y., Yang, F., Cheng, Z., & Gao, K. (2024) · 2024 25th International Conference on Electronic Packaging Technology (ICEPT) · doi:10.1109/icept63120.2024.10668483 · Cited by 1
New GaN Power-Electronics Packaging Solutions: A Thermal Analysis using Raman Thermography
Faqir, M., Manoi, A., Mrotzek, T., Knippscheer, S., Massiot, M., Buchta, M., Blanck, H., Rochette, S., Vendier, O., & Kuball, M. (2010) · IMAPSource Proceedings · doi:10.4071/isom-2010-wa3-paper3 · Cited by 1
High-Density Integrated GaN Hybrid Power Module Design with Double-Sided Cooling
Tian, X., Jia, N., Cui, H. H., Tolbert, L. M., & Bai, H. K. (2025) · IEEE International Workshop on Integrated Power Packaging (IWIPP) · doi:10.1109/iwipp61784.2025.10971510
Research works printed but not linked: 4
- Agrawal, B. (2017). Loss Minimization Using Linear Soft-Switching with Wide Bandgap Devices in Efficient High-Frequency DC-DC Converters. [Master’s Thesis, McMaster University].
- Saccon, R., Bhogaraju, S.K., and Elger, G. (2022, January 21). Cu Sintering for High Power Electronics Packaging—Challenges and Solutions. Proceedings of the GMM-Fachbericht 105: Mikro-Nano-Integration, Aachen, Germany.
- Duch, S., Gunst, S., and Reh, S. (2024, January 12–14). The Attractions, Challenges, and Potential of Copper Sinter Paste for Power Electronics Applications. Proceedings of the 13th International Conference on Integrated Power Electronics Systems (CIPS 2024), Düsseldorf, Germany.
- Risch, R., and Biela, D.J. (2022, January 15–17). PCB-Embedded Packaging for Ultra-Fast Switching of SiC MOSFETs. Proceedings of the 12th International Conference on Integrated Power Electronics Systems (CIPS 2022), Berlin, Germany.
Cited by
Viewegh, N., Holloway, H., Biggerstaff, R., Herzog, J. B., & Stanley, C. M. (2026) · Hardware · doi:10.3390/hardware4010006 · Cited by 24
“Companies are experimenting with chip scale packaging, embedded die packaging, and multiple chip modules to optimize performance and thermal control [119].”
InfluentialHamza, H., Rusli, J. R., & Jarndal, A. (2026) · Energies · doi:10.3390/en19071752 · Cited by 13
Interface physics and engineering of soft magnetic composites for high-frequency power electronics
Ke, B., Liu, J., Huang, J., et al. (2026) · Journal of Materials Science Materials in Electronics · doi:10.1007/s10854-026-17719-6 · Cited by 3
The role of STATCOM devices in wind energy systems: Review article
Mosaad, M. I. (2026) · Wind Engineering · doi:10.1177/0309524x261425922 · Cited by 3
Drabczyk, A., Uss, P., Bucka, K., Bulowski, W., Kasza, P., Mazur, P., Boguta, E., Mazur, M., Putynkowski, G., & Socha, R. P. (2025) · Micromachines · doi:10.3390/mi16121421 · Cited by 11
“In particular, experimental investigations reported in [42] directly analyze the impact of repeated thermal cycling on the electrical stability of GaN devices, showing that cyclic heating and cooling can induce gradual changes in series resistance and leakage current due to thermally induced stress…”
Metadata
- Authors
- Han, G., Kim, J., Park, S., & Bae, W.
- Affiliations
- Soongsil University (KR)
- Department of Electrical Engineering, Soongsil University, Seoul 06978, Republic of Korea
- Venue
- Electronics
- Publisher
- MDPI AG
- Published
- 2025-10-27
- Volume
- 14
- Issue
- 21
- Pages
- 4193
- ISSN
- 2079-9292 (ISSN-L)
- OpenAlex
- W4415643464
- Semantic Scholar
- 04fac27c95cfa428f25e46bdd3222ce9e9cf1b9a
- Cited by
- 34
- References
- 78
- Citations by year
- 2026: 33 · 2025: 1
- FWCI
- 7.66
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- Locations
- Electronics (publishedVersion, cc-by)
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Silicon Carbide Semiconductor Technologies
- Physical Sciences › Physics and Astronomy › Condensed Matter Physics › GaN-based semiconductor devices and materials
- Physical Sciences › Materials Science › Materials Chemistry › Thermal properties of materials
- Keywords
- wide bandgap semiconductors, silicon carbide, gallium nitride, thermal management, power devices, switching and conduction losses, two-dimensional electron gas, hot spots, interfacial thermal resistance, GaN-on-SiC, double-sided cooling, junction temperature estimation, remaining useful life prediction, device reliability, electromagnetic interference, health monitoring
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
The claim verdicts this report counts are experimental: their accuracy is not yet measured.
A language model drew the claims from the paper on 2026-10-06, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).
A second model labelled each claim on 2026-10-06 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).
Cited sources are checked with a language model’s help (gpt-6-sol).
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.