Application of PLCL as a biodegradable polymer in biomedical engineering
Open accessThe DOI matches its Crossref record; 350 of the 350 references it cites were found in a registry or an index; 93 of the 223 sources its claims cite were checked for support.
Abstract
Poly (L-lactide-co-ε-caprolactone) (PLCL) is a novel polymer that has attracted considerable attention in the biomedical field due to its exceptional biocompatibility. However, a comprehensive and systematic summary of its diverse applications remains lacking. To address this gap, the present review outlines the physicochemical properties of PLCL and the factors that influence them. Additionally, it consolidates the most commonly employed processing and preparation methods for PLCL in biomedical applications. The review further provides a systematic overview of current applications of PLCL in various biomedical fields, including wound healing, cardiovascular stents, nerve repair, osteochondral tissue engineering, drug delivery, and screening. It also examines modification strategies aimed at enhancing PLCL performance. Ultimately, this review seeks to provide valuable insights for future research and development of PLCL in biomedical contexts.
Overview
CoChat Summary
TL;DR
This is a review of PLCL (poly(L-lactide-co-ε-caprolactone)) as a biodegradable biomaterial for biomedical engineering, summarizing its properties, processing methods, and applications. The paper argues that PLCL’s biocompatibility, tunable degradation, and adjustable mechanics make it useful across tissue engineering and other biomedical uses, but performance still often needs to be improved by blending or surface modification.
Key findings
- PLCL’s degradation can be tuned from weeks to years by changing the L-lactide/ε-caprolactone ratio and molecular weight; higher L-lactide content generally speeds degradation, while higher ε-caprolactone content slows it.
- The paper reports typical PLCL mechanical ranges of 20–60 MPa tensile strength, 400–600 MPa elastic modulus, and 100–500% elongation at break, with properties also affected by temperature, humidity, and processing method.
- PLCL is reviewed as a candidate material for wound healing, vascular stents/grafts, nerve repair, cartilage repair, bone repair, urethral/bladder repair, drug delivery, drug screening, and stem cell culture.
- The review highlights several processing routes for PLCL, including electrospinning, 3D printing, supercritical CO₂ foaming, membrane casting, and aerogel scaffolds; for example, 3D printing is described as enabling precise control of porosity, pore size, and scaffold microstructure.
Methods
- This is a narrative review, not an experimental study.
- Literature was retrieved using Web of Science; the authors first searched “PLCL”, then used topic-specific keywords such as “Electrospinning/coaxial electrospinning,” “3D printing,” “scCO₂,” “Membranes,” “Aerogel scaffolds,” and application terms including wound healing, vascular tissue engineering, cardiovascular tissue engineering, nerve tissue engineering, cartilage tissue engineering, bone tissue engineering, and urethral tissue engineering.
- The paper synthesizes the literature by organizing it into PLCL’s physicochemical properties, processing methods, tissue engineering applications, and other biomedical fields.
Limitations
- The paper states that PLCL’s mechanical strength may still be insufficient for high-load applications such as load-bearing bone repair and vascular stents.
- It also states that PLCL’s hydrophobicity can hinder cell adhesion, proliferation, and differentiation, and that many additives used to improve PLCL require further in vivo safety evaluation.
- Evident from the text: this is a review article, so its conclusions depend on the cited literature rather than new experimental data.
Model-written summary. Check it against the paper before relying on it.
Integrity signals
Registry
Cites
Statistics
Figures
![Fig. 1 Morphology and diameter of PLCL nanofiber membranes [74]](https://figures.cochat.ai/paper-figures/dbb5ffa63751499f8effe805e71e710d/application-of-plcl-as-a-biodegradable-polymer-in-biomedical-engineering-figure-1.jpg)
![Fig. 2 a–d images of PLCL scaffolds prepared by LTD method at different magnifications [108]](https://figures.cochat.ai/paper-figures/a8e820b77dd64884a9d38f27b3f84738/application-of-plcl-as-a-biodegradable-polymer-in-biomedical-engineering-figure-2.jpg)
![Fig. 3 Characterization of scCO₂ porous scaffolds of PLCL/β-TCP Composites using SEM and μCT [13]](https://figures.cochat.ai/paper-figures/0fa6c4feb02b44d58003dabe3de06a60/application-of-plcl-as-a-biodegradable-polymer-in-biomedical-engineering-figure-3.jpg)
![Fig. 4 PLCL membrane with the compact layer and porous layer. A Macroscopic and microscopic images of the PLCL membrane (scale bar: 100 μm), B surface roughness (n = 5, *p < 0.05) and C microscopic image of the cross-section (scale bar: 100 μm) [123]](https://figures.cochat.ai/paper-figures/be64f6a16cd742db9979ae0cb637e540/application-of-plcl-as-a-biodegradable-polymer-in-biomedical-engineering-figure-4.jpg)
![Fig. 5 SEM images of PLCL/ADM and ADM aerogels scaffold [126]](https://figures.cochat.ai/paper-figures/d5bec210c8e1462ebdf968af29e9d4c3/application-of-plcl-as-a-biodegradable-polymer-in-biomedical-engineering-figure-5.jpg)
![Fig. 6 The treatment of infected wound by PLCL Janus dressing [147]](https://figures.cochat.ai/paper-figures/68ac0077a6a44f5fbdaa57b3e4ed8f13/application-of-plcl-as-a-biodegradable-polymer-in-biomedical-engineering-figure-6.jpg)
![Fig. 7 Triple-layer structure of PLCL vascular graft [154]](https://figures.cochat.ai/paper-figures/552357730c2f425aa64d01f8ea19dc56/application-of-plcl-as-a-biodegradable-polymer-in-biomedical-engineering-figure-7.jpg)
![Fig. 8 The process of fabricating PLCL/FDM novel platform for cardiomyocyte culture and coculture [173]](https://figures.cochat.ai/paper-figures/1aba6434c5174b29b63e0e4a6ef7af5c/application-of-plcl-as-a-biodegradable-polymer-in-biomedical-engineering-figure-8.jpg)
![Fig. 9 Schematic diagram of PVDF/PLCL/PEDOT electroactive artificial nerve conduit indirectly promoting the repair of damaged peripheral nerves by modulating the immune microenvironment [187]](https://figures.cochat.ai/paper-figures/11f9d968e1f74522816b1fd071cf5149/application-of-plcl-as-a-biodegradable-polymer-in-biomedical-engineering-figure-9.jpg)
![Fig. 10 Three-phase bionic BMSCs scaffold loaded with TGF-β promoting the regeneration of hyalene cartilage [196]](https://figures.cochat.ai/paper-figures/0667faf63e58411c82dc9def33374ab1/application-of-plcl-as-a-biodegradable-polymer-in-biomedical-engineering-figure-10.jpg)
![Fig. 11 Schematic diagram of ternary MXene-loaded PLCL/collagen nanofibrous scaffolds that promote spontaneous osteogenic differentiation [209]](https://figures.cochat.ai/paper-figures/c120b5c703684273a8c5386db34bf11c/application-of-plcl-as-a-biodegradable-polymer-in-biomedical-engineering-figure-11.jpg)
![Fig. 12 3D-printed PCL/PLCL urethral scaffold loaded with dual autologous cells in fibrin hydrogel [211]](https://figures.cochat.ai/paper-figures/2620c86f0cd3480da50c9ea53be963d8/application-of-plcl-as-a-biodegradable-polymer-in-biomedical-engineering-figure-12.jpg)
![Fig. 13 A Microscopic morphology of the ligament braided with 16 fibers (SB: PLCL scaffold blank; SP: PLCL-PLL scaffold; S1L: PLCL-PLL/HA-PLL scaffold). B Schematic diagram of the global structure of the multi-layer braided scaffold [214]](https://figures.cochat.ai/paper-figures/6ae950ffb98d46469c29d8ab41d1b04f/application-of-plcl-as-a-biodegradable-polymer-in-biomedical-engineering-figure-13.jpg)
Verification
Claims the paper makes
66 Valid · 12 Not valid · 70 Not checked · 37 Own results and interpretations
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“Poly (L-lactide-co-ε-caprolactone) (PLCL) has become an important biomaterial in biomedical engineering due to its excellent biocompatibility, tunable biodegradability, and multifunctional mechanical properties [1–4].”
§ Application of PLCL as a biodegradable polymer in biomedical engineering > Introduction
What the sources say
- Not checked — no full text of the sourcecites [1] Teng Y, Wang X, Song L, Yang J, Hou S, Lv Q, et al. 3D printed polycaprolactone/poly (L-lactide-co-ϵ-caprolactone) composite ureteral stent with biodegradable and antibacterial properties. Biomed Mater. 2025;20:025026. 39908677 source
- Supportedcites [2] Zhan A, Chen L, Sun W, Tang Y, Chen J, Yu D, et al. Enhancement of diabetic wound healing using a core-shell nanofiber platform with sequential antibacterial, angiogenic, and collagen deposition activities. Mater Des. 2022;218:110660. source
The Introduction describes PLCL as a promising polymer for reinforcing wound-healing nanofibers. Section 3.2 calls it biodegradable and biocompatible with excellent mechanical properties, and reports that its degradation rate changed when other materials were added. (LLM, conf=0.88)
- Not checked — no full text of the sourcecites [3] Liu X, Liu S, Feng S, Wang X, Bai W, Xiao J, et al. Thermal, mechanical and degradation properties of flexible poly (1,3-trimethylene carbonate)/poly (L-lactide-co-ε-caprolactone) blends. J Polym Res. 2021;28:447. source
- Partly supportedcites [4] Kurki A, Hannula M, Miettinen S, Teittinen H, Paakinaho K, Hyttinen J, et al. Ascorbic acid 2-phosphate-releasing poly-l-lactide-co-epsilon-caprolactone membranes enhance tissue regeneration: first in vivo insights for pelvic organ prolapse. Regen Biomater. 2025;12:rbaf097. PMC12640511 41287757 sourceExperimental — accuracy not yet measured
The Introduction describes PLCL as biodegradable, biocompatible and flexible, and lists several biomedical applications. The Results report different degradation rates and tensile properties for the tested PLCL formulations, but do not establish broadly tunable biodegradability or the claimed range of mechanical properties for PLCL generally. Page numbers are unavailable in our copy. (LLM, conf=0.84)
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“PLCL surface modification or covalent binding of bioactive molecules, such as cell adhesion factors and cell growth factors, can further improve their compatibility with specific cells [25–27].”
§ Application of PLCL as a biodegradable polymer in biomedical engineering > Physical and chemical properties of PLCL > Biocompatibility
What the sources say
- Not checked — no full text of the sourcecites [25] Jin J, Limburg S, Joshi SK, Landman R, Park M, Zhang Q, et al. Peripheral nerve repair in rats using composite hydrogel-filled aligned nanofiber conduits with incorporated nerve growth factor. Tissue Eng Part A. 2013;19:2138–2146. 23659607 PMC3761439 source
- Partly supportedcites [26] Táborská J, Blanquer A, Brynda E, Filová E, Stiborová L, Jenčová V, et al. PLCL/PCL dressings with platelet lysate and growth factors embedded in fibrin for chronic wound regeneration. Int J Nanomed. 2023;18:595–610. PMC9904224 36760757 sourceExperimental — accuracy not yet measured
The Introduction and Conclusion (pages not provided) describe PLCL/PCL nanofibers modified with a fibrin coating containing bioactive molecules. The Cell Viability results report improved growth of human endothelial cells with platelet lysate and added growth factors. The paper does not establish covalent binding of those molecules to PLCL/PCL, so that alternative in the claim is unsupported. (LLM, conf=0.86)
- Partly supportedcites [27] Wang Y, Wu T, Zhang J, Feng Z, Yin M, Mo X. A bilayer vascular scaffold with spatially controlled release of growth factors to enhance in situ rapid endothelialization and smooth muscle regeneration. Mater Des. 2021;204:109649. sourceExperimental — accuracy not yet measured
Section 3.3 reports improved proliferation of endothelial progenitor cells and smooth muscle cells on PLCL/collagen scaffolds incorporating VEGF and PDGF, respectively. Section 2.1 describes loading these factors into electrospun fibers, not covalently binding them or modifying the PLCL surface. The cellular benefit is supported, but the specified modification methods are not. (LLM, conf=0.86)
plainstates a possible cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
The cited sources that could be checked couldn’t confirm or dispute this claim.
In the paper
“At the same time, the long-term existence of PLCL in vivo did not produce toxic accumulation in other organs [33].”
§ Application of PLCL as a biodegradable polymer in biomedical engineering > Physical and chemical properties of PLCL > Biocompatibility
What the sources say
- Could not verifycites [33] Kim A, Downer MA, Berry CE, Valencia C, Fazilat AZ, Griffin M. Investigating immunomodulatory biomaterials for preventing the foreign body response. Bioengineering. 2023;10:1411. 38136002 PMC10741225 sourceExperimental — accuracy not yet measured
The Foreign Body Response section discusses reactions to other implanted materials, but does not address PLCL or accumulation in other organs. Searches for PLCL and for long-term toxic accumulation found no passage in our copy that supports the claim; page numbers were not available. (LLM, conf=0.76)
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Could not verify
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“In addition to its inherent properties, PLCL’s adaptability through surface modification, blending with bioactive molecules, and processing through advanced manufacturing techniques such as electrospinning, 3D printing, and supercritical carbon dioxide (scCO₂) foaming has extended its use to multiple fields [11–13].”
§ Application of PLCL as a biodegradable polymer in biomedical engineering > Introduction
What the sources say
- Not checked — no full text of the sourcecites [11] Keun Kwon I, Kidoaki S, Matsuda T. Electrospun nano- to microfiber fabrics made of biodegradable copolyesters: structural characteristics, mechanical properties and cell adhesion potential. Biomaterials. 2005;26:3929–3939. 15626440 source
- Not checked — no full text of the sourcecites [12] Bachtiar EO, Ritter VC, Gall K. Structure-property relationships in 3D-printed poly (L-lactide-co-ε-caprolactone) degradable polymer. J Mech Behav Biomed Mater. 2021;121:104650. 34166872 source
- Partly supportedcites [13] Pitkänen S, Paakinaho K, Pihlman H, Ahola N, Hannula M, Asikainen S, et al. Characterisation and in vitro and in vivo evaluation of supercritical-co₂-foamed b-tcp/PLCL composites for bone applications. Eur Cells Mater. 2019;38:35–50. 31381126 sourceExperimental — accuracy not yet measured
The Introduction and Composite manufacturing and characterisation sections describe blending PLCL with bioactive β-TCP and processing the composite by supercritical CO₂ foaming. The Discussion describes a compression treatment that changes the composite surface. The paper does not establish PLCL blending with bioactive molecules, PLCL processing by 3D printing, or extension of its use to multiple fields; its study concerns bone applications. Page numbers are unavailable in our copy. (LLM, conf=0.88)
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“Advances in polymer science have allowed precise control of the monomer and molecular weight ratios during PLCL synthesis, enabling customization of its degradation rate, mechanical strength, and cellular interactions to meet specific biomedical needs [9, 10].”
§ Application of PLCL as a biodegradable polymer in biomedical engineering > Introduction
What the sources say
- Partly supportedcites [9] Rajewska J, Kowalski J, Matys J, Dobrzyński M, Wiglusz RJ. The use of lactide polymers in bone tissue regeneration in dentistry–a systematic review. J Funct Biomater. 2023;14:83. 36826882 PMC9961440 sourceExperimental — accuracy not yet measured
The Introduction (page unavailable) says the ratio of glycolide to lactic units affects PLGA degradation and that PLA stereoisomers differ in mechanical properties. The Results and Discussion mention PLCL-containing materials and cell adhesion, but the cited review does not establish that controlling monomer and molecular-weight ratios during PLCL synthesis customizes all three claimed properties. (LLM, conf=0.82)
- Partly supportedcites [10] Wu S, Dong T, Li Y, Sun M, Qi Y, Liu J, et al. State-of-the-art review of advanced electrospun nanofiber yarn-based textiles for biomedical applications. Appl Mater Today. 2022;27:101473. 35434263 PMC8994858 sourceExperimental — accuracy not yet measured
The Surgical sutures section (page unavailable) lists PLCL among absorbable sutures described as having controllable degradation rates and mechanical properties. The Bone section (page unavailable) reports a cellular response to a PLCL-nanoyarn hydrogel. Neither passage links these properties or cellular interactions to precise control of monomer or molecular-weight ratios during PLCL synthesis. (LLM, conf=0.82)
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Partly supported
53 more claims · 24 with their cited sources checked
Create a free account to see all 185 claims and every source verdict.
- It may state two separate claims as one. 121
- Probably not a substantial claim. 20
Citations
Cites
Items 201–350 of 350
Liu, X., Laurent, C., Du, Q., Targa, L., Cauchois, G., Chen, Y., Wang, X., & de Isla, N. (2018) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.36494 · Cited by 35
Biodegradable, Tissue Adhesive Polyester Blends for Safe, Complete Wound Healing
Daristotle, J. L., Erdi, M., Lau, L. W., Zaki, S. T., Srinivasan, P., Balabhadrapatruni, M., Ayyub, O. B., Sandler, A. D., & Kofinas, P. (2021) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.1c00865 · Cited by 34 · cited 1×
“These applications include wound healing, vascular transplantation, bone and cartilage repair, and even drug delivery systems [14 – 20].”
Haim Zada, M., Kumar, A., Elmalak, O., Markovitz, E., Icekson, R., & Domb, A. J. (2020) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2019.118870 · Cited by 33
Sabbatier, G., Larrañaga, A., Guay‐Bégin, A., Fernandez, J., Diéval, F., Durand, B., Sarasua, J., & Laroche, G. (2015) · Macromolecular Bioscience · doi:10.1002/mabi.201500130 · Cited by 32
Ugartemendia, J. M., Larrañaga, A., Amestoy, H., Etxeberria, A., & Sarasua, J. R. (2018) · European Polymer Journal · doi:10.1016/j.eurpolymj.2017.11.040 · Cited by 32
Zhou, Y., Shen, Q., Lin, Y., Xu, S., & Meng, Q. Y. (2020) · Materials Science and Engineering C · doi:10.1016/j.msec.2020.110752 · Cited by 32
Santos-Rosales, V., Magariños, B., Starbird, R., Suárez-González, J., Fariña, J. B., Alvarez-Lorenzo, C., & García-González, C. A. (2021) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2021.120801 · Cited by 32
Kong, W., Zhao, Y., Yang, X., Chen, J., Chen, Y., Zhao, Z., Chen, X., Wang, F., & Fu, C. (2023) · Ceramics International · doi:10.1016/j.ceramint.2023.03.193 · Cited by 32 · cited 1×
“…in living organisms, they often serve as bridges or carriers in the early stage, such as tissue engineering scaffolds or drug delivery systems, to provide support and protection for damaged local bodies, and further deliver cells, drugs and other factors to promote tissue regeneration [34, 35].”
Self-citationDuan, R., Wang, Y., Zhang, Y., Wang, Z., Du, F., Du, B., Su, D., Liu, L., Li, X., & Zhang, Q. (2021) · ACS Omega · doi:10.1021/acsomega.1c02190 · Cited by 31
Shafiq, M., Wang, L., Zhi, D., Zhang, Q., Wang, K., Wang, L., Kim, D., Kong, D., & Kim, S. H. (2019) · Journal of Biomedical Materials Research Part B: Applied Biomaterials · doi:10.1002/jbm.b.34260 · Cited by 30
Du, H., Tao, L., Wang, W., Liu, D., Zhang, Q., Sun, P., Yang, S., & He, C. (2019) · Materials Science and Engineering C · doi:10.1016/j.msec.2019.03.063 · Cited by 30
Methylcobalamin‐Loaded PLCL Conduits Facilitate the Peripheral Nerve Regeneration
Zhang, D., Yang, W., Wang, C., Zheng, H., Liu, Z., Chen, Z., & Gao, C. (2020) · Macromolecular Bioscience · doi:10.1002/mabi.201900382 · Cited by 30
de Souza, J. R., Cardoso, L. M., de Toledo, P. T. A., Rahimnejad, M., Kito, L. T., Thim, G. P., Campos, T. M. B., Borges, A. L. S., & Bottino, M. C. (2024) · Journal of Biomedical Materials Research Part B: Applied Biomaterials · doi:10.1002/jbm.b.35406 · Cited by 30
Wang, Y., Wu, T., Zhang, J., Feng, Z., Yin, M., & Mo, X. (2021) · Materials & Design · doi:10.1016/j.matdes.2021.109649 · Cited by 28 · cited 1×
“PLCL surface modi fi cation or covalent binding of bioactive molecules, such as cell adhesion factors and cell growth factors, can further improve their compatibility with speci fi c cells [25 – 27].”
Wang, X., Bai, Z., Li, K., Dong, J., Zhang, H., Liu, X., Han, W., & Li, Q. (2023) · Biomacromolecules · doi:10.1021/acs.biomac.3c00175 · Cited by 28
Qi, Z., Pan, S., Yang, X., et al. (2024) · International Journal of Nanomedicine · doi:10.2147/ijn.s448962 · Cited by 28 · cited 1×
“With the continuous regeneration and repair of the body and tissues, biological materials need to be gradually metabolized and degraded in the body, thus providing space for tissue regeneration and regrowth [36].”
Technical development and application of supercritical CO2 foaming technology in PCL foam production
Zhou, Y., Tian, Y., & Zhang, M. (2024) · Scientific Reports · doi:10.1038/s41598-024-57545-6 · Cited by 28 · cited 1×
“PLCL scaffolds with tailored pore sizes, porosity, and pore size distribution can be fabricated by adjusting pressure, temperature, depressurization rate, and saturation time [115].”
Structure-property relationships in 3D-printed poly(l-lactide-co-ε-caprolactone) degradable polymer
Bachtiar, E. O., Ritter, V. C., & Gall, K. (2021) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2021.104650 · Cited by 27
Wang, K., Liu, Y., Wang, H., Liu, Y., Yang, X., & Sun, S. (2022) · Biomaterials Advances · doi:10.1016/j.bioadv.2022.213154 · Cited by 27
A Highly Stable, Multifunctional Janus Dressing for Treating Infected Wounds
Deng, J., Hu, M., Cai, Z., Yu, W., Zhan, L., Zhu, X., Ke, Q., Gao, R., Zhou, X., Liu, H., et al. (2024) · Advanced Healthcare Materials · doi:10.1002/adhm.202401345 · Cited by 27 · cited 2×
“6 The treatment of infected wound by PLCL Janus dressing [147] PLCL exhibits excellent biocompatibility and high bio-safety, and can be fabricated into wound dressings suitable for wound healing via techniques including electrospinning and 3D printing.”
Self-citationJung, Y., Kim, S., Kim, Y. H., & Kim, S. H. (2010) · Journal of Biomaterials Science Polymer Edition · doi:10.1163/156856209x430579 · Cited by 26 · cited 1×
“H i gh l y e l a s ti c s ca ff o l d , h i gh l y s i m u l a t e d n a t u r a l ca r til a g e m i c r o e nv i r on m e n t , p r o m o t e ca r til a g e ti ss u e g r o w t h [ 338 ] –”
Ranjbar-Mohammadi, M., Abbasian, M., Mousavi, E., & Arab-Bafrani, Z. (2019) · European Polymer Journal · doi:10.1016/j.eurpolymj.2019.03.024 · Cited by 26
Kong, W., Qi, Z., Xia, P., Chang, Y., Li, H., Qu, Y., Pan, S., & Yang, X. (2019) · RSC Advances · doi:10.1039/c9ra01717h · Cited by 26 · cited 1×
“…in living organisms, they often serve as bridges or carriers in the early stage, such as tissue engineering scaffolds or drug delivery systems, to provide support and protection for damaged local bodies, and further deliver cells, drugs and other factors to promote tissue regeneration [34, 35].”
Wang, Z., Cao, W., Wu, F., Ke, X., Wu, X., Zhou, T., Yang, J., Yang, G., Zhong, C., Gou, Z., et al. (2023) · Biomaterials Science · doi:10.1039/d2bm02148j · Cited by 26 · cited 4×
“10 Three-phase bionic BMSCs scaffold loaded with TGF-β promoting the regeneration of hyalene cartilage [196] that mesenchymal stem cells in the body can be recruited to the injured area under the action of local in fl ammatory factors and differentiate into osteoblasts, which further secrete…”
InfluentialNamhongsa, M., Daranarong, D., Molloy, R., Ross, S., Ross, G. M., Tuantranont, A., Boonyawan, D., Tocharus, J., Sivasinprasasn, S., Topham, P. D., et al. (2023) · European Polymer Journal · doi:10.1016/j.eurpolymj.2023.112135 · Cited by 26
Larrañaga, A., Petisco, S., & Sarasua, J. R. (2013) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2013.06.003 · Cited by 25
Du, P., Casavitri, C., Suhaeri, M., Wang, P., Lee, J.-H., Koh, W., & Park, K. (2018) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.8b01118 · Cited by 25
Pacharra, S., McMahon, S., Duffy, P., Basnett, P., Yu, W., Seisel, S., Stervbo, U., Babel, N., Roy, I., Viebahn, R., et al. (2020) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2020.00991 · Cited by 25
Wang, X., Liu, J., Jing, H., Li, B., Sun, Z., Li, B., Kong, D., Leng, X., & Wang, Z. (2021) · Materials Science and Engineering: C · doi:10.1016/j.msec.2021.111872 · Cited by 25
Cao, Y., Jiang, J., Jiang, Y., Li, Z., Hou, J., & Li, Q. (2022) · Polymers for Advanced Technologies · doi:10.1002/pat.5528 · Cited by 25 · cited 2×
“…structure, which facilitates cell adhesion and proliferation, interstitial fl uid transport, and vascular and tissue ingrowth within the scaffold, so they have many applications in bone tissue engineering, nerve tissue engineering, vascular tissue engineering and cartilage repair [13, 118 – 120].”
Wang, B., Chariyev‐Prinz, F., Burdis, R., Eichholz, K. F., & Kelly, D. J. (2021) · Biofabrication · doi:10.1088/1758-5090/ac41a0 · Cited by 25 · cited 1×
“…o f o s t e o c hond r a l i n t e rf ace [ 196 ] S u l f a t e a l g i n a t e 3 D p r i n ti ng T G F E nh a n ce c hond r og e n i c d i ff e r e n ti a ti on a nd c hond r og e n e s i s o f M S C s ; P r o m o t e s c o ll a g e n d e po s iti on [ 344 ] from the outside to the inside [190].”
Song, E. S., Park, J.-H., Ha, S. S., Cha, P.-H., Kang, J.-T., Park, C. Y., & Park, K. (2022) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.2c01709 · Cited by 25 · cited 3×
“The animal experiment results showed that the ECM-PLCL scaffold could maintain normal corneal characteristics when transplanted into the rabbit eye [216].”
InfluentialErdi, M., Rozyyev, S., Balabhadrapatruni, M., Saruwatari, M. S., Daristotle, J. L., Ayyub, O. B., Sandler, A. D., & Kofinas, P. (2023) · Bioengineering & Translational Medicine · doi:10.1002/btm2.10335 · Cited by 25
Applications of carbon dots and its modified carbon dots in bone defect repair
Zhu, L., Kong, W., Ma, J., Zhang, R., Qin, C., Liu, H., & Pan, S. (2022) · Journal of Biological Engineering · doi:10.1186/s13036-022-00311-x · Cited by 25
Self-citationElectrospun Nanofibers with Core–Shell Structure for Treatment of Bladder Regeneration
Feng, C., Liu, C., Liu, S., Wang, Z., Yu, K., & Zeng, X. (2019) · Tissue Engineering Part A · doi:10.1089/ten.tea.2018.0255 · Cited by 24
Hashimoto, K., Kurokawa, N., & Hotta, A. (2021) · Polymer · doi:10.1016/j.polymer.2021.124190 · Cited by 24
Liu, X., Liu, S., Li, K., Fan, Y., Feng, S., Peng, L., Zhang, T., Wang, X., Chen, D., Xiong, C., et al. (2021) · Colloids and Surfaces A: Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2021.127550 · Cited by 24 · cited 2×
“…from poly (L-lactic acid) (PLLA) and poly ( ε -caprolactone) (PCL), PLCL combines the rigidity and structural integrity of PLLA with the fl exibility and elasticity of PCL, making it particularly suitable for a wide range of tissue engineering and regenerative medicine applications [5 – 8].”
Tri-Layered Vascular Grafts Guide Vascular Cells’ Native-like Arrangement
Yuan, X., Li, W., Yao, B., Li, Z., Kong, D., Huang, S., & Zhu, M. (2022) · Polymers · doi:10.3390/polym14071370 · Cited by 24 · cited 2×
“7 Triple-layer structure of PLCL vascular graft [154] signi fi cant challenge for PLCL alone [168, 169].”
Kong, W., Li, R., Xia, P., Su, P., Qi, Z., Zhao, C., Fu, C., & Yang, X. (2022) · Materials & Design · doi:10.1016/j.matdes.2022.110585 · Cited by 24
Tan, Y., Chen, Y., Lu, T., Witman, N., Yan, B., Gong, Y., Ai, X., Li, Y., Liu, M., Luo, R., et al. (2023) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2023.1094397 · Cited by 24
In Vivo Evaluation of the Biocompatibility of Biomaterial Device
Frazão, L. P., Vieira de Castro, J., & Neves, N. M. (2020) · Advances in Experimental Medicine and Biology · doi:10.1007/978-981-15-3262-7_8 · Cited by 23 · cited 1×
“Both in vitro and in vivo experiments show that PLCL maintains good histocompatibility after implantation, usually only triggers a mild, acute local in fl ammatory response, which is part of the normal wound healing process and is self-limiting within a short period of time [31, 32].”
Zhao, J., Song, G., Zhao, Q., Feng, H., Wang, Y., Anderson, J. M., Zhao, H. Q., & Liu, Q. (2022) · Journal of Biomedical Materials Research Part B Applied Biomaterials · doi:10.1002/jbm.b.35184 · Cited by 23
He, W., Ye, L., Coates, P., Caton-Rose, F., & Zhao, X. (2023) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2023.123980 · Cited by 23
Mikes, P., Horakova, J., Saman, A., Vejsadova, L., Topham, P., Punyodom, W., Dumklang, M., & Jencova, V. (2021) · Journal of Industrial Textiles · doi:10.1177/1528083719848155 · Cited by 22
Lee, S. Y., Thow, S. Y., Abdullah, S., Ng, M. H., & Mohamed Haflah, N. H. (2022) · International Journal of Nanomedicine · doi:10.2147/ijn.s362144 · Cited by 22 · cited 1×
“The above advantages make electrospinning technology especially suitable for the design and preparation of bio-materials for vascular repair and peripheral nerve repair [79, 80].”
Gao, Y., Guo, X., Wang, X., Li, D., Tang, H. Q., Zhao, W., Xu, T., Wang, S.-S., Li, F., Zhang, H., et al. (2024) · Composites Part B Engineering · doi:10.1016/j.compositesb.2024.111665 · Cited by 22
Larrañaga, A., Diamanti, E., Rubio, E., Palomares, T., Alonso-Varona, A., Aldazabal, P., Martin, F. J., & Sarasua, J. R. (2014) · Materials Science and Engineering: C · doi:10.1016/j.msec.2014.05.061 · Cited by 21
Táborská, J., Blanquer, A., Brynda, E., Filová, E., Stiborová, L., Jenčová, V., Havlíčková, K., Riedelová, Z., & Riedel, T. (2023) · International Journal of Nanomedicine · doi:10.2147/ijn.s393890 · Cited by 21
Wang, H., Xiao, Y., Fang, Z., Zhang, Y., Liu, Y., Zhao, C., Meng, Z., Liu, Y., Li, C., Han, Q., et al. (2023) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2023.126293 · Cited by 21 · cited 1×
“However, this technique yields PLCL W ound r e p a i r [ 264 ] , n e r v e r e g e n e r a ti on [ 265 ] , v a s c u l a r g r a f t [ 266 ] , ca r til a g e r e p a i r [ 17 , 267 , 268 ] , bon e d e f ec t [ 207 , 269 ] , 3 D p r i n ti ng P e r s on a li ze d c u s t o m i za ti on , c on t r o…”
Fabrication of a Compliant Vascular Graft Using Extrusion Printing and Electrospinning Technique
Fazal, F., Melchels, F. P. W., McCormack, A., Silva, A. F., Handley, E., Mazlan, N. A., Callanan, A., Koutsos, V., & Radacsi, N. (2024) · Advanced Materials Technologies · doi:10.1002/admt.202400224 · Cited by 21
Lim, J. I., & Kim, J. H. (2015) · Colloids and Surfaces B: Biointerfaces · doi:10.1016/j.colsurfb.2015.05.004 · Cited by 20
Shafiq, M., & Kim, S. H. (2016) · Macromolecular Research · doi:10.1007/s13233-016-4138-x · Cited by 20
The Use of Lactide Polymers in Bone Tissue Regeneration in Dentistry—A Systematic Review
Rajewska, J., Kowalski, J., Matys, J., Dobrzyński, M., & Wiglusz, R. J. (2023) · Journal of Functional Biomaterials · doi:10.3390/jfb14020083 · Cited by 20 · cited 1×
“Advances in polymer science have allowed precise control of the monomer and molecular weight ratios during PLCL synthesis, enabling customization of its degradation rate, mechanical strength, and cellular interactions to meet speci fi c biomedical needs [9, 10].”
Wang, L., Liang, F., Shang, Y., Liu, X., Yin, M., Shen, J., & Yuan, J. (2023) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.3c15176 · Cited by 20
Ma, C., Zhang, P., & Shen, Y. (2019) · Journal of Neurorestoratology · doi:10.26599/jnr.2019.9040024 · Cited by 19 · cited 1×
“Due to the existence of environmental inhibitory factors in the central nervous system, the ability of nerve axon regeneration is limited, and often cannot get a good therapeutic effect [176, 177].”
Macartney, R. A., Weaver, E., Irwin, R., Wylie, M. P., Burke, G. A., & Lamprou, D. A. (2024) · Biomaterials Advances · doi:10.1016/j.bioadv.2024.213765 · Cited by 19
Li, Y., Jin, D., Fan, Y., Zhang, K., Yang, T., Zou, C., & Yin, A. (2023) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2022.1114034 · Cited by 18
Gao, E., Wang, Z., Zhao, S., Zhu, X., Xu, S., Xu, Y., Wang, Y., Xu, N., & Tao, B. (2024) · Chemical Engineering Journal · doi:10.1016/j.cej.2024.154878 · Cited by 18 · cited 2×
“…r o s p i nn i ng c u r c u m i n ; KGN M a i n t a i n t h e ca r til a g e f o r m o f r e g e n e r a t e d ca r til a g e , i nh i b it ca r til a g e o ss i fi ca ti on , p r o m o t e ca r til a g e m a t u r it y a nd s t a b ilit y [ 17 ] P N I P A M ; M A ; C S E l ec t r o s p i nn i ng –”
Jing, H., Gao, B., Gao, M., Yin, H., Mo, X., Zhang, X., Luo, K., Feng, B., Fu, W., Wang, J., et al. (2018) · Artificial Cells, Nanomedicine, and Biotechnology · doi:10.1080/21691401.2018.1439844 · Cited by 17
Wang, Z., Zhang, W., Xie, C., Wen, F., Ma, C., Lin, N., Thian, E. S., & Wang, X. (2019) · Journal of Physics: Materials · doi:10.1088/2515-7639/ab1c68 · Cited by 17 · cited 1×
“On this basis, directional spinning can be further prepared, or composite vascular scaffolds with double or triple structure can be prepared by different technical methods, so as to better simulate vascular structure, thus providing better mechanical properties [153].”
Drug-loaded PLCL/PEO-SA bilayer nanofibrous membrane for controlled release
Huang, Y., Wang, L., Liu, Y., Li, T., & Xin, B. (2021) · Journal of Biomaterials Science Polymer Edition · doi:10.1080/09205063.2021.1970881 · Cited by 17
Ma, Y., Zhang, R., Mao, X., Li, X., Li, T., Liang, F., Jing, H., Wen, L., Wang, W., Xiao, L., et al. (2024) · Journal of Neural Engineering · doi:10.1088/1741-2552/ad3851 · Cited by 17
Liu, K., Tang, W., Jin, S., Hao, X., Hu, Y., Zhou, T., Zhou, C., Chen, G., Cui, Y., Liu, Q., et al. (2024) · Journal of Cellular and Molecular Medicine · doi:10.1111/jcmm.18544 · Cited by 17
Vaquette, C., Frochot, C., Rahouadj, R., Muller, S., & Wang, X. (2008) · Soft Materials · doi:10.1080/15394450801887109 · Cited by 15
Characterization of bending behavior of hydroxyapatite/biopolymer porous composite beams
Hazwani, F., & Todo, M. (2021) · Composites Communications · doi:10.1016/j.coco.2021.100747 · Cited by 15 · cited 1×
“The elongation at break of PLCL is typically high, ranging from 100 to 500%, especially when the ε -caprolactone proportion is increased, as this signi fi cantly enhances the material ’ s fl exibility [57, 58].”
Carney, B. C., Oliver, M. A., Erdi, M., Kirkpatrick, L. D., Tranchina, S. P., Rozyyev, S., Keyloun, J. W., Saruwatari, M. S., Daristotle, J. L., Moffatt, L. T., et al. (2022) · Burns · doi:10.1016/j.burns.2022.01.012 · Cited by 15 · cited 1×
“…that fi bers fabricated via the SBS method exhibit minimal solvent residues, the fi ber scaffolds had diameters ranging from the nanoscale to the microscale, and PLCL materials could be fabricated into various scaffolds via the SBS method for applications in diverse biomedical fi elds [84 – 87].”
Bar, J. K., Kowalczyk, T., Grelewski, P. G., Stamnitz, S., Paprocka, M., Lis, J., Lis-Nawara, A., An, S., & Klimczak, A. (2022) · Materials · doi:10.3390/ma15051900 · Cited by 15 · cited 2×
“1, the SEM images exhibit L-lactic acid [232] ε -caprolactone [233] L-lactic acid, glycolide [234] glycolide [235] the microtopography of a PLCL fi ber membrane prepared via electrospinning technology [74].”
Snyder, Y., & Jana, S. (2023) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.2c01430 · Cited by 15
Abe, G. L., Sasaki, J., Tsuboi, R., Kohno, T., Kitagawa, H., & Imazato, S. (2023) · Journal of Biomedical Materials Research Part B Applied Biomaterials · doi:10.1002/jbm.b.35365 · Cited by 15 · cited 1×
“The PLCL is dissolved in volatile organic solvents such as chloroform and dichloromethane, and then the solution is uniformly cast onto a fl at substrate, such as a glass slide or silicone rubber sheet, and after the solvent is volatilized, a fi lm is formed [121].”
Erdi, M., Saruwatari, M. S., Rozyyev, S., Acha, C., Ayyub, O. B., Sandler, A. D., & Kofinas, P. (2023) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.3c00283 · Cited by 15
Shrestha, K. R., Jeon, S. H., Jung, A. R., Kim, I. G., Kim, G. E., Park, Y. H., Kim, S. H., & Lee, J. Y. (2019) · Tissue Engineering and Regenerative Medicine · doi:10.1007/s13770-019-00187-x · Cited by 14
Blanquer, A., Musílková, J., Filová, E., Táborská, J., Brynda, E., Riedel, T., Klápšťová, A., Jenčová, V., Müllerová, J., Košťáková, E. K., et al. (2021) · Nanomaterials · doi:10.3390/nano11020457 · Cited by 14
Xu, P., Tan, S., Niu, D., Wang, Q., Liu, T. X., Yang, W., & Ma, P. (2023) · Polymer · doi:10.1016/j.polymer.2023.126239 · Cited by 14
Ai, X., Luo, R., Wang, H., Yan, B., Li, K., Yu, X., Dong, W., Tan, Y., Liu, M., Chen, Y., et al. (2023) · Materials Today Bio · doi:10.1016/j.mtbio.2023.100776 · Cited by 14
Du, Y., Xing, L., Hou, P., Qi, J., Liu, X., Zhang, Y., Chen, D., Li, Q., Xiong, C., Huang, T., et al. (2022) · Colloids and Surfaces A: Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2022.129244 · Cited by 14 · cited 1×
“Compared with other biomaterials, PLCL exhibits core advantages including excellent biocompatibility and fl exible tunability of degradation rate and mechanical properties, thereby enabling adaptability to diverse tissue engineering scenarios [66, 67].”
Niu, D., Xu, P., Li, J., Yang, W., Liu, T. X., & Ma, P. (2022) · Polymer · doi:10.1016/j.polymer.2022.125532 · Cited by 14
Tran, T. T., Hamid, Z. A. A., Lai, N. T., Cheong, K. Y., & Todo, M. (2019) · Journal of Materials Science · doi:10.1007/s10853-019-04159-3 · Cited by 13
Liu, X., Liu, S., Fan, Y., Qi, J., Wang, X., Bai, W., Chen, D., Xiong, C., & Zhang, L. (2021) · Journal of Industrial and Engineering Chemistry · doi:10.1016/j.jiec.2021.08.014 · Cited by 13
Liu, M., Ke, X., Yao, Y., Wu, F., Ye, S., Zhang, L., Yang, G., Shen, M., Li, Y., Yang, X., et al. (2021) · Journal of Materials Chemistry B · doi:10.1039/d1tb01238j · Cited by 13
Su, Z., Xing, Y., Wang, F., Xu, Z., & Gu, Y. (2022) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-022-06689-w · Cited by 13
Cai, G., Yuan, Z., Wang, X., Wu, S., Zhou, S., Lei, Z., Li, P., EL-Newehy, M., Moydeen Abdulhameed, M., Shafiq, M., et al. (2024) · Chemical Engineering Journal · doi:10.1016/j.cej.2024.156555 · Cited by 13
Liu, Y., Wang, L., Huang, Y., Hou, C., Xin, B., Li, T., & Jiang, Q. (2023) · Polymer International · doi:10.1002/pi.6458 · Cited by 12
Hybrid Green Materials Obtained by PCL Melt Blending with Diatomaceous Earth
Carotenuto, M. R., Cavallaro, G. P., Chinnici, I., Lazzara, G., & Milioto, S. (2024) · Molecules · doi:10.3390/molecules29061203 · Cited by 12
Xing, R., Gao, R., Huangfu, Y., Zhang, Y., Li, S., Zhang, C., Huang, P., Wang, W., Dong, A., & Feng, Z. (2024) · Biomaterials Science · doi:10.1039/d4bm00182f · Cited by 12
Poly(glycolic acid) Nanofibers via Sea‐Island Melt‐Spinning
Huang, W., Huang, X., Wang, P., & Chen, P. (2018) · Macromolecular Materials and Engineering · doi:10.1002/mame.201800425 · Cited by 12
Nardo, T., Chiono, V., Gentile, P., Tabrizian, M., & Ciardelli, G. (2016) · International Journal of Polymeric Materials and Polymeric Biomaterials · doi:10.1080/00914037.2016.1163566 · Cited by 11
PEGylated chitosan and PEGylated PLCL for blood vessel repair: An in vitro study
Yin, A., Lan, X., Zhuang, W., Tang, Z., Li, Y., & Wang, Y. (2019) · Journal of Biomaterials Applications · doi:10.1177/0885328219875937 · Cited by 11
Ranjbar‐Mohammadi, M., Mousavi, E., Mostakhdem Hashemi, M., Abbasian, M., Asadi, J., Esmaili, E., Fesharaki, M., Asadi, P., & Arab‐Bafrani, Z. (2020) · IET Nanobiotechnology · doi:10.1049/iet-nbt.2019.0278 · Cited by 11
Zhu, Y., Liu, X., Zhang, K., EL-Newehy, M., Abdulhameed, M. M., Mo, X., Cao, L., & Wang, Y. (2025) · Colloids and Surfaces B: Biointerfaces · doi:10.1016/j.colsurfb.2024.114337 · Cited by 11
Liu, X., Liu, S., Feng, S., Wang, X., Bai, W., Xiao, J., Chen, D., Xiong, C., & Zhang, L. (2021) · Journal of Polymer Research · doi:10.1007/s10965-021-02802-9 · Cited by 11
Controlled release of Berberine Chloride by electrospun core/shell PVP/PLCL fibrous membranes
Sun, B., Li, S., Zhang, H., Li, H., Zhao, C., Yuan, X., & Cui, Y. (2010) · International Journal of Materials and Product Technology · doi:10.1504/ijmpt.2010.031433 · Cited by 10
Jeong, S., Kang, Y.-J., Lee, K.-S., Shin, H., & Lee, B. (2017) · Biotechnology and Bioprocess Engineering · doi:10.1007/s12257-016-0609-3 · Cited by 10
Faculty of Medicine and Health Technology, F.-3. T. U., Pitkänen, S., Paakinaho, K., Pihlman, H., Ahola, N., Hannula, M., Asikainen, S., Manninen, M., Morelius, M., Keränen, P., et al. (2019) · European Cells and Materials · doi:10.22203/ecm.v038a04 · Cited by 10
Preparation of Poly(ε-caprolactone)/Poly(ester amide) Electrospun Membranes for Vascular Repair
Zhang, X., Bai, S., Zang, L., Chen, X., & Yuan, X. (2022) · Chemical Research in Chinese Universities · doi:10.1007/s40242-022-1480-8 · Cited by 10 · cited 1×
“The above advantages make electrospinning technology especially suitable for the design and preparation of bio-materials for vascular repair and peripheral nerve repair [79, 80].”
Advanced Bioresin Formulation for 3D-Printed Bone Scaffolds: PCLDMA and p-PLA Integration
Sakarya, D., Zorlu, T., Yücel, S., Sahin, Y. M., & Özarslan, A. C. (2024) · Polymers · doi:10.3390/polym16040534 · Cited by 10 · cited 1×
“Biodegradable polymers require the introduction of dimethacrylate (DMA) groups at their molecular terminals via chemical modi fi cation, and the modi fi ed materials can be used for SLA printing [102].”
Assessment of the Biocompatibility of the PLLA-PLCL Scaffold Obtained by Electrospinning
Oyama, H. T. T., Cortella, L. R. X., Rosa, I. N. S., Filho, L. E. R., Hui, W. S., Cestari, I. N., & Cestari, I. A. (2015) · Procedia Engineering · doi:10.1016/j.proeng.2015.07.021 · Cited by 9
Characterization and preparation of bioinspired resorbable conduits for vascular reconstruction
Yang, S.-K., Shafiq, M., Kim, D., Park, C., Jung, Y., & Hyun, S. (2016) · Macromolecular Research · doi:10.1007/s13233-016-4042-4 · Cited by 9
Rhee, J., Shafiq, M., Kim, D., Jung, Y., & Kim, S. H. (2019) · Macromolecular Research · doi:10.1007/s13233-019-7003-x · Cited by 9
Wang, G., Ju, S., Li, X., Cai, Y., Li, Y., Li, W., Zhou, S., He, H., Dong, Z., & Fu, W. (2023) · Biomedicine & Pharmacotherapy · doi:10.1016/j.biopha.2023.114734 · Cited by 9
Wu, H., Zhou, X., Zhou, X., & Fang, Y. (2023) · ChemistrySelect · doi:10.1002/slct.202301948 · Cited by 9 · cited 1×
“1, the SEM images exhibit L-lactic acid [232] ε -caprolactone [233] L-lactic acid, glycolide [234] glycolide [235] the microtopography of a PLCL fi ber membrane prepared via electrospinning technology [74].”
Liu, W., Li, Q., Song, G., Lin, Z., Gong, X., Feng, H., Zhao, H. Q., Zhou, Y., Wang, Y., Fan, Z., et al. (2025) · Regenerative Biomaterials · doi:10.1093/rb/rbaf073 · Cited by 9
The research and preparation of a novel nano biodegradable polymer external reinforcement
Zhang, X., Chen, B., Fu, W., Fang, Z., Liu, Z., Lü, W., Shi, Z. Y., Chen, L., & Chen, T. (2011) · Applied Surface Science · doi:10.1016/j.apsusc.2011.08.030 · Cited by 8
Shao, W., Cui, C., Xiong, J., Wang, L., Zhao, X., Hou, Y., Chang, S., Sun, N., Zhang, Y., Gao, Y., et al. (2021) · Macromolecular Materials and Engineering · doi:10.1002/mame.202100462 · Cited by 8
Yu, X., Zhang, D., Liu, C., Liu, Z., Li, Y., Zhao, Q., Gao, C., & Wang, Y. (2021) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2021.744230 · Cited by 8
Gao, Q., Yu, K., Chen, F., Lu, L., & Zhang, P. (2022) · Pharmaceutics · doi:10.3390/pharmaceutics14102108 · Cited by 8 · cited 1×
“…of various shapes and sizes through electrospinning, 3D printing and other technical methods to meet the application of different repair scenarios [206]. de Souza et al. developed an electrospun composite scaffold based on PEG and PLCL, and added calcined and lyophilized silicate chlorinated…”
Future prospects in the tissue engineering of heart valves: a focus on the role of stem cells
Albert, B. J., & Butcher, J. T. (2023) · Expert Opinion on Biological Therapy · doi:10.1080/14712598.2023.2214313 · Cited by 8 · cited 1×
“7 Triple-layer structure of PLCL vascular graft [154] signi fi cant challenge for PLCL alone [168, 169].”
Enhancing neuroinduction activity of PLCL-based nerve conduits through native epineurium integration
Li, X., Mao, X., Tao, M., Liang, F., Tian, X., Fan, J. Y., Wang, X., Yu, T., & Ao, Q. (2024) · Biomaterials Advances · doi:10.1016/j.bioadv.2024.213803 · Cited by 8 · cited 1×
“However, this technique yields PLCL W ound r e p a i r [ 264 ] , n e r v e r e g e n e r a ti on [ 265 ] , v a s c u l a r g r a f t [ 266 ] , ca r til a g e r e p a i r [ 17 , 267 , 268 ] , bon e d e f ec t [ 207 , 269 ] , 3 D p r i n ti ng P e r s on a li ze d c u s t o m i za ti on , c on t r o…”
Wang, Y., Wu, H., Liu, Z., Cao, J., Lin, H., Cao, H., Zhu, X., & Zhang, X. (2024) · Journal of Materials Chemistry B · doi:10.1039/d4tb00863d · Cited by 8
Fu, D., Xiang, Y., Xiang, Z., Zhang, J., Yang, F., Yang, L., Zhao, J., & Wang, Y. (2024) · Chemical Engineering Journal · doi:10.1016/j.cej.2024.153806 · Cited by 8
Teng, Y., Wang, X., Song, L., Yang, J., Hou, S., Lv, Q., Jiang, L., Guan, Y., & Shi, J. (2025) · Biomedical Materials · doi:10.1088/1748-605x/adb2ce · Cited by 8 · cited 3×
“The high-temperature printing process is not suitable for incorporating bioactive molecules that inactivate at high temperatures, thus imposing certain limitations on FDM printing [1].”
Shenoy, D. B., Chawla, J. S., & Amiji, M. M. (2004) · MRS Proceedings · doi:10.1557/proc-845-aa5.49 · Cited by 7
Sato, H., KOBAYASHI, F., ICHIKAWA, Y., & OISHI, Y. (2012) · KOBUNSHI RONBUNSHU · doi:10.1295/koron.69.60 · Cited by 7 · cited 1×
“1, the SEM images exhibit L-lactic acid [232] ε -caprolactone [233] L-lactic acid, glycolide [234] glycolide [235] the microtopography of a PLCL fi ber membrane prepared via electrospinning technology [74].”
DADACI, M., KARAGÜLLE, N., SÖNMEZ, E., DADACI, Z., İŞCİ, E. T., İNCE, B., VARGEL, İ., PİŞKİN, E., & ERK, A. Y. (2016) · TURKISH JOURNAL OF MEDICAL SCIENCES · doi:10.3906/sag-1412-110 · Cited by 7
Jiao, W., Yu, W., Wang, Y., Zhang, J., Wang, Y., He, H., & Shi, G. (2023) · Regenerative Therapy · doi:10.1016/j.reth.2022.12.004 · Cited by 7
Wang, X., Jiang, H., Zhang, W., Kong, Y., Kong, D., Liu, J., & Wang, Z. (2023) · Journal of Materials Chemistry B · doi:10.1039/d3tb00761h · Cited by 7 · cited 1×
“The results of subcutaneous implantation in rats showed that the biomimetic composite scaffold had appropriate mechanical strength, low calci fi cation deposition and good regenerative ability [175].”
Ning, X., Liu, N., Sun, T., You, Y., Luo, Y., Kang, E., Chen, Z., Wang, Y., & Ren, J. (2023) · Biomedical Materials · doi:10.1088/1748-605x/acf551 · Cited by 7
Han, Y., Wang, H., Guan, Y., Li, S., Yuan, Z., Lu, L., & Zheng, X. (2024) · Biomedical Materials · doi:10.1088/1748-605x/ad407c · Cited by 7 · cited 2×
“…a nd m i c r o - s t r u c t u r e s , h i gh - p r ec i s i on s t r u c t u r e s , a nd r a p i d p r e p a r a ti on V a s c u l a r g r a f t [ 155 ] , ca r til a g e r e p a i r , n e v e r r e g e n e r a ti on [ 183 , 270 , 271 ] , bon e d e f ec t [ 271 ] , u r e t h r a l ti ss u e e ng…”
Biomacromolecular hydrogel scaffolds from microfluidics for cancer therapy: A review
Hao, S., Shi, L., Li, J., Shi, J., Kuang, G., Liang, G., & Gao, S. (2024) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2024.136738 · Cited by 7
Burko, P., Sulamanidze, G., & Nikishin, D. (2025) · Journal of Cosmetic Dermatology · doi:10.1111/jocd.70077 · Cited by 7
Lee, G., Han, S.-B., Kim, S. H., Jeong, S., & Kim, D.-H. (2024) · Frontiers in Cell and Developmental Biology · doi:10.3389/fcell.2024.1303688 · Cited by 6 · cited 2×
“In addition, the surface modi fi cation of PLCL scaffolds can further give the material different surface chemical properties and structural morphology, and promote the differentiation of stem cells in different directions [225, 226].”
Effect of solvents on the enzyme mediated degradation of copolymers
Banerjee, A., Chatterjee, K., & Madras, G. (2015) · Materials Research Express · doi:10.1088/2053-1591/2/9/095301 · Cited by 5 · cited 1×
“For example, although the degradation rate of PLCL is signi fi cantly higher than that of PCL and PLA, it remains relatively slow [148].”
Zhang, J., Du, J., Xia, D., Liu, J., Wu, T. S., Shi, J., Song, W., Jin, D., Mo, X., & Yin, M. (2016) · RSC Advances · doi:10.1039/c6ra16292d · Cited by 5
Wang, W., Liu, Y., Ye, L., Coates, P., Caton‐Rose, F., & Zhao, X. (2022) · Journal of Biomedical Materials Research. Part B - Applied biomaterials · doi:10.1002/jbm.b.35106 · Cited by 5
Su, Z., Xing, Y., Xiao, Y., et al. (2024) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.4c00634 · Cited by 5
Ning, X., Wang, R., Liu, N., You, Y., Wang, Y., Wang, J., Wang, Y., Chen, Z., Zhao, H., & Wu, T. (2024) · Biomaterials Science · doi:10.1039/d4bm01214c · Cited by 5 · cited 2×
“Finally, after freeze-drying, the material eventually forms an aerogel scaffold, which is suitable for the rapid repair of full-thickness skin defects [126].”
Jabri, F.-E., Ouballouch, A., Lasri, L., & El Alaiji, R. (2025) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-025-15995-w · Cited by 5
Feng, H., Zhang, G., Zhang, S., Han, L., Yuan, Z., Yu, X., Lou, S., Ji, Y., Shafiq, M., EL-Newehy, M., et al. (2026) · Chemical Engineering Journal · doi:10.1016/j.cej.2025.172113 · Cited by 5
Correlation between arterial mechanical properties, vascular biomaterial and tissue engineering.
Kakou, A., Louis, H., Cattan, V., et al. (2007) · PubMed · Cited by 5
Solid-State Foaming of Polycaprolactone (PCL)
Wang, H., Li, W., & Kumar, V. (2007) · doi:10.1115/imece2007-42666 · Cited by 4
Electrospun Biodegradable Nanofiber Mats for Controlled Release of Herbal Medicine
Han, J., Zhang, H.-T., Zhu, L., & Branford-White, C. J. (2009) · International Conference on Bioinformatics and Biomedical Engineering · doi:10.1109/icbbe.2009.5162767 · Cited by 4
Zhao, T., Zhang, H., Li, P., et al. (2019) · RSC Advances · doi:10.1039/c8ra07700b · Cited by 4
Šebová, E., Leal, F., Klusáček Rampichová, M., Nirwan, V. P., Fahmi, A., Costa, P. F., & Filová, E. (2025) · International Journal of Molecular Sciences · doi:10.3390/ijms26115383 · Cited by 4
Marszalik, K., Polak, M., Berniak, K., Knapczyk-Korczak, J., Szewczyk, P. K., Marzec, M. M., & Stachewicz, U. (2026) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.5c01568 · Cited by 4
Liu, X., Zhang, H., Zhang, S., Jin, H., Zhang, S., Wang, D., Jiang, J., Wang, X., Uyama, H., & Li, Q. (2024) · Journal of Applied Polymer Science · doi:10.1002/app.55607 · Cited by 4
Okada, M., Fukuba, S., Yamaki, D., & Iwata, T. (2024) · Regenerative Therapy · doi:10.1016/j.reth.2024.08.017 · Cited by 4
Johnson, C. D., & Zhang, F. (2025) · Pharmaceutical Research · doi:10.1007/s11095-025-03840-4 · Cited by 4
Simvastatin-loaded 3D aerogel scaffolds promote bone regeneration
Linfeng, L., Xiaowei, Z., Chen, X., & Zhu, X. (2024) · Bio-Medical Materials and Engineering · doi:10.3233/bme-230068 · Cited by 4
Šimonová, Z., Porubová, L., Verner, A., Gabor, R., Vilamová, Z., Dobročka, E., Cieslar, M., Krbečková, V., Dedkova, K. P., Svoboda, L., et al. (2022) · Fibers and Polymers · doi:10.1007/s12221-022-4994-2 · Cited by 3
Xue, P., Tan, X., Xi, H., et al. (2023) · International Journal of Bioprinting · doi:10.36922/ijb.1152 · Cited by 3 · cited 2×
“After printing, the scaffold is freeze-dried to remove dioxane [95, 108].”
Shen, S., Li, Y., Chen, M., Guo, W., Gao, S., Zhang, Z., Zhuo, N., Liu, S., & Guo, Q. (2025) · Bioengineering & Translational Medicine · doi:10.1002/btm2.70022 · Cited by 3 · cited 1×
“Unlike the FDM and SLS methods, the LTD printing process is carried out at low temperatures, which preserves the bioactivity of temperature-sensitive bioactive agents, such as growth factors and extracellular matrix proteins [109, 110].”
Li, K., Kabir, M., Rahman, M., & Chen, S. (2025) · European Polymer Journal · doi:10.1016/j.eurpolymj.2025.114251 · Cited by 3
Kurki, A., Hannula, M., Miettinen, S., Teittinen, H., Paakinaho, K., Hyttinen, J., Lindén, J., & Sartoneva, R. (2025) · Regenerative Biomaterials · doi:10.1093/rb/rbaf097 · Cited by 3
Sun, Y., Hu, S., Wang, L., Liang, F., Zhou, Z., Zhang, Y., Pan, Y., Shen, J., Yin, M., & Yuan, J. (2026) · Bioactive Materials · doi:10.1016/j.bioactmat.2025.11.001 · Cited by 3 · cited 1×
“These applications include wound healing, vascular transplantation, bone and cartilage repair, and even drug delivery systems [14 – 20].”
2D/3D Direct Writing of Thermoplastics through Electrohydrodynamic Printing
Paralı, L., Koç, M., & Yıldız, Z. (2022) · Polymer Science, Series A · doi:10.1134/s0965545x22700183 · Cited by 2 · cited 1×
“…and 3D printing technology, by uses electrostatic stretching to accurately deposit PLCL melted fi bers on the substrate, can prepare micron and sub-micron fi ber structures, suitable for vascular grafts, nerves, skin and other scaffolds requiring high resolution and porous structure [104].”
Sun, S., Cao, L., Wu, J., Sun, B., El-Newehy, M. H., Abdulhameed, M. M., Mo, X., Yang, X., & Zheng, H. (2024) · Biomedical Materials · doi:10.1088/1748-605x/ad5ba4 · Cited by 2
Liu, J., Hou, Y., Yang, Y., Wang, B., Zhang, X., Tian, Y., Wu, G., Gu, B., Ni, Z., & Zhao, G. (2026) · Journal of Drug Delivery Science and Technology · doi:10.1016/j.jddst.2025.107812 · Cited by 2
Fu, Z., Wang, J., Wu, Y., Zeng, W., Zhang, C., Sun, Y., Fan, X., Huang, Y., Deng, F., & Jiayun, X. (2025) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.37925 · Cited by 1
Almeida, C. L., Figueiredo, L. R. F., Melo, J. D. D., & Medeiros, E. S. (2025) · ACS Omega · doi:10.1021/acsomega.5c06418 · Cited by 1
Sananpanich, K., Wiwattanapanich, K., Daranarong, D., Namhongsa, M., Jringjit, W., Pleumsamran, A., Chaisuksunt, V., Chaisri, W., Chattipakorn, N., & Punyodom, W. (2025) · ACS Omega · doi:10.1021/acsomega.4c10800
kong, W., Li, R., Xia, P., Pan, S., Qi, Z., Fu, C., Zhao, C., & Yang, X. (2022) · SSRN Electronic Journal · doi:10.2139/ssrn.4009382
Research works printed but not linked: 1
- Yu CP, Li X, Shen ZQ. Ring-opening homopolymerization of lactides. Prog Chem. 2007;19:136–144.
Cited by
Aranci, K., & Kızılkurtlu, A. A. (2026) · Polymers · doi:10.3390/polym18080974 · Cited by 2
Liu, Z., Zhao, C., Zhou, H., Shi, Z., Huang, R., Xu, L., Su, J., Chen, G., Zhao, Z., Li, Y., et al. (2026) · Stem Cell Research & Therapy · doi:10.1186/s13287-026-05072-8
“Furthermore, the considerable potential of PLCL-based scaffolds for wound treatment applications has been validated in multiple studies [22–24].”
Kongsak, C., Rithchumpon, P., Akkravijitkul, N., et al. (2026) · Journal of Molecular Structure · doi:10.1016/j.molstruc.2026.146741
An injectable PLCL/CaHA microsphere composite gel for enhanced skin regeneration
Wang, X., Chen, X., Gao, R., Sun, Y., Jiang, S., He, Y., & Wang, D. (2026) · Biomaterials Advances · doi:10.1016/j.bioadv.2026.215047
A “Vascular Band-Aid” strategy for proactive inhibition of post-anastomotic vascular complications
Xu, R., Yan, J., Li, X., Yin, X., Yang, Z., Zhou, Q., & Yi, B. (2026) · Regenerative Biomaterials · doi:10.1093/rb/rbag164
“PLCL, a Food and Drug Administration (FDA)- approved biodegradable elastomer with a well-established safety profile, has recently gained recognition for vascular applications owing to its excellent biocompatibility and capacity to support cell growth [13–15].”
Metadata
- Authors
- Zhao, Y., & Liu, H.
- Corresponding author
- Zhao, Yonggang
- Venue
- Journal of Materials Science Materials in Medicine
- Published
- 2026-02-27
- Volume
- 37
- Issue
- 1
- ISSN
- 0957-4530 (ISSN-L)
- 1573-4838
- PMC
- PMC12960328
- OpenAlex
- W7131777400
- Cited by
- 7
- References
- 325
- Citations by year
- 2026: 7
- FWCI
- 3.04
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- cc-by
- creativecommons.org/licenses/by/4.0 (tdm)
- creativecommons.org/licenses/by/4.0 (vor, 5 d)
- Locations
- Journal of Materials Science Materials in Medicine (publishedVersion, cc-by)
- PubMed Central (publishedVersion, cc-by)
- PubMed (publishedVersion)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Topics
- Physical Sciences › Materials Science › Biomaterials › biodegradable polymer synthesis and properties
- Physical Sciences › Engineering › Biomedical Engineering › Bone Tissue Engineering Materials
- Health Sciences › Medicine › Surgery › Surgical Sutures and Adhesives
- Keywords
- poly(L-lactide-co-ε-caprolactone), PLCL, biodegradable polymers, biocompatibility, physicochemical properties, wound healing, cardiovascular stents, nerve repair, osteochondral tissue engineering, drug delivery, polymer modification
- MeSH terms
- Animals, Biocompatible Materials, Biomedical Engineering, Humans, Materials Testing, Polyesters, Polymers, Wound Healing, Drug Delivery Systems, Absorbable Implants, Tissue Engineering
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
The claim verdicts this report counts are experimental: their accuracy is not yet measured.
A language model drew the claims from the paper on 2026-10-08, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).
A second model labelled each claim on 2026-10-08 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).
Cited sources are checked with a language model’s help (gpt-6-sol).
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.