Application of PLCL as a biodegradable polymer in biomedical engineering
Open accessThe DOI matches its Crossref record; 350 of the 350 references it cites were found in a registry or an index; 93 of the 223 sources its claims cite were checked for support.
Abstract
Poly (L-lactide-co-ε-caprolactone) (PLCL) is a novel polymer that has attracted considerable attention in the biomedical field due to its exceptional biocompatibility. However, a comprehensive and systematic summary of its diverse applications remains lacking. To address this gap, the present review outlines the physicochemical properties of PLCL and the factors that influence them. Additionally, it consolidates the most commonly employed processing and preparation methods for PLCL in biomedical applications. The review further provides a systematic overview of current applications of PLCL in various biomedical fields, including wound healing, cardiovascular stents, nerve repair, osteochondral tissue engineering, drug delivery, and screening. It also examines modification strategies aimed at enhancing PLCL performance. Ultimately, this review seeks to provide valuable insights for future research and development of PLCL in biomedical contexts.
Overview
CoChat Summary
TL;DR
This is a review of PLCL (poly(L-lactide-co-ε-caprolactone)) as a biodegradable biomaterial for biomedical engineering, summarizing its properties, processing methods, and applications. The paper argues that PLCL’s biocompatibility, tunable degradation, and adjustable mechanics make it useful across tissue engineering and other biomedical uses, but performance still often needs to be improved by blending or surface modification.
Key findings
- PLCL’s degradation can be tuned from weeks to years by changing the L-lactide/ε-caprolactone ratio and molecular weight; higher L-lactide content generally speeds degradation, while higher ε-caprolactone content slows it.
- The paper reports typical PLCL mechanical ranges of 20–60 MPa tensile strength, 400–600 MPa elastic modulus, and 100–500% elongation at break, with properties also affected by temperature, humidity, and processing method.
- PLCL is reviewed as a candidate material for wound healing, vascular stents/grafts, nerve repair, cartilage repair, bone repair, urethral/bladder repair, drug delivery, drug screening, and stem cell culture.
- The review highlights several processing routes for PLCL, including electrospinning, 3D printing, supercritical CO₂ foaming, membrane casting, and aerogel scaffolds; for example, 3D printing is described as enabling precise control of porosity, pore size, and scaffold microstructure.
Methods
- This is a narrative review, not an experimental study.
- Literature was retrieved using Web of Science; the authors first searched “PLCL”, then used topic-specific keywords such as “Electrospinning/coaxial electrospinning,” “3D printing,” “scCO₂,” “Membranes,” “Aerogel scaffolds,” and application terms including wound healing, vascular tissue engineering, cardiovascular tissue engineering, nerve tissue engineering, cartilage tissue engineering, bone tissue engineering, and urethral tissue engineering.
- The paper synthesizes the literature by organizing it into PLCL’s physicochemical properties, processing methods, tissue engineering applications, and other biomedical fields.
Limitations
- The paper states that PLCL’s mechanical strength may still be insufficient for high-load applications such as load-bearing bone repair and vascular stents.
- It also states that PLCL’s hydrophobicity can hinder cell adhesion, proliferation, and differentiation, and that many additives used to improve PLCL require further in vivo safety evaluation.
- Evident from the text: this is a review article, so its conclusions depend on the cited literature rather than new experimental data.
Model-written summary. Check it against the paper before relying on it.
Integrity signals
Registry
Cites
Statistics
Figures
![Fig. 1 Morphology and diameter of PLCL nanofiber membranes [74]](https://figures.cochat.ai/paper-figures/dbb5ffa63751499f8effe805e71e710d/application-of-plcl-as-a-biodegradable-polymer-in-biomedical-engineering-figure-1.jpg)
![Fig. 2 a–d images of PLCL scaffolds prepared by LTD method at different magnifications [108]](https://figures.cochat.ai/paper-figures/a8e820b77dd64884a9d38f27b3f84738/application-of-plcl-as-a-biodegradable-polymer-in-biomedical-engineering-figure-2.jpg)
![Fig. 3 Characterization of scCO₂ porous scaffolds of PLCL/β-TCP Composites using SEM and μCT [13]](https://figures.cochat.ai/paper-figures/0fa6c4feb02b44d58003dabe3de06a60/application-of-plcl-as-a-biodegradable-polymer-in-biomedical-engineering-figure-3.jpg)
![Fig. 4 PLCL membrane with the compact layer and porous layer. A Macroscopic and microscopic images of the PLCL membrane (scale bar: 100 μm), B surface roughness (n = 5, *p < 0.05) and C microscopic image of the cross-section (scale bar: 100 μm) [123]](https://figures.cochat.ai/paper-figures/be64f6a16cd742db9979ae0cb637e540/application-of-plcl-as-a-biodegradable-polymer-in-biomedical-engineering-figure-4.jpg)
![Fig. 5 SEM images of PLCL/ADM and ADM aerogels scaffold [126]](https://figures.cochat.ai/paper-figures/d5bec210c8e1462ebdf968af29e9d4c3/application-of-plcl-as-a-biodegradable-polymer-in-biomedical-engineering-figure-5.jpg)
![Fig. 6 The treatment of infected wound by PLCL Janus dressing [147]](https://figures.cochat.ai/paper-figures/68ac0077a6a44f5fbdaa57b3e4ed8f13/application-of-plcl-as-a-biodegradable-polymer-in-biomedical-engineering-figure-6.jpg)
![Fig. 7 Triple-layer structure of PLCL vascular graft [154]](https://figures.cochat.ai/paper-figures/552357730c2f425aa64d01f8ea19dc56/application-of-plcl-as-a-biodegradable-polymer-in-biomedical-engineering-figure-7.jpg)
![Fig. 8 The process of fabricating PLCL/FDM novel platform for cardiomyocyte culture and coculture [173]](https://figures.cochat.ai/paper-figures/1aba6434c5174b29b63e0e4a6ef7af5c/application-of-plcl-as-a-biodegradable-polymer-in-biomedical-engineering-figure-8.jpg)
![Fig. 9 Schematic diagram of PVDF/PLCL/PEDOT electroactive artificial nerve conduit indirectly promoting the repair of damaged peripheral nerves by modulating the immune microenvironment [187]](https://figures.cochat.ai/paper-figures/11f9d968e1f74522816b1fd071cf5149/application-of-plcl-as-a-biodegradable-polymer-in-biomedical-engineering-figure-9.jpg)
![Fig. 10 Three-phase bionic BMSCs scaffold loaded with TGF-β promoting the regeneration of hyalene cartilage [196]](https://figures.cochat.ai/paper-figures/0667faf63e58411c82dc9def33374ab1/application-of-plcl-as-a-biodegradable-polymer-in-biomedical-engineering-figure-10.jpg)
![Fig. 11 Schematic diagram of ternary MXene-loaded PLCL/collagen nanofibrous scaffolds that promote spontaneous osteogenic differentiation [209]](https://figures.cochat.ai/paper-figures/c120b5c703684273a8c5386db34bf11c/application-of-plcl-as-a-biodegradable-polymer-in-biomedical-engineering-figure-11.jpg)
![Fig. 12 3D-printed PCL/PLCL urethral scaffold loaded with dual autologous cells in fibrin hydrogel [211]](https://figures.cochat.ai/paper-figures/2620c86f0cd3480da50c9ea53be963d8/application-of-plcl-as-a-biodegradable-polymer-in-biomedical-engineering-figure-12.jpg)
![Fig. 13 A Microscopic morphology of the ligament braided with 16 fibers (SB: PLCL scaffold blank; SP: PLCL-PLL scaffold; S1L: PLCL-PLL/HA-PLL scaffold). B Schematic diagram of the global structure of the multi-layer braided scaffold [214]](https://figures.cochat.ai/paper-figures/6ae950ffb98d46469c29d8ab41d1b04f/application-of-plcl-as-a-biodegradable-polymer-in-biomedical-engineering-figure-13.jpg)
Verification
Claims the paper makes
66 Valid · 12 Not valid · 70 Not checked · 37 Own results and interpretations
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“Poly (L-lactide-co-ε-caprolactone) (PLCL) has become an important biomaterial in biomedical engineering due to its excellent biocompatibility, tunable biodegradability, and multifunctional mechanical properties [1–4].”
§ Application of PLCL as a biodegradable polymer in biomedical engineering > Introduction
What the sources say
- Not checked — no full text of the sourcecites [1] Teng Y, Wang X, Song L, Yang J, Hou S, Lv Q, et al. 3D printed polycaprolactone/poly (L-lactide-co-ϵ-caprolactone) composite ureteral stent with biodegradable and antibacterial properties. Biomed Mater. 2025;20:025026. 39908677 source
- Supportedcites [2] Zhan A, Chen L, Sun W, Tang Y, Chen J, Yu D, et al. Enhancement of diabetic wound healing using a core-shell nanofiber platform with sequential antibacterial, angiogenic, and collagen deposition activities. Mater Des. 2022;218:110660. source
The Introduction describes PLCL as a promising polymer for reinforcing wound-healing nanofibers. Section 3.2 calls it biodegradable and biocompatible with excellent mechanical properties, and reports that its degradation rate changed when other materials were added. (LLM, conf=0.88)
- Not checked — no full text of the sourcecites [3] Liu X, Liu S, Feng S, Wang X, Bai W, Xiao J, et al. Thermal, mechanical and degradation properties of flexible poly (1,3-trimethylene carbonate)/poly (L-lactide-co-ε-caprolactone) blends. J Polym Res. 2021;28:447. source
- Partly supportedcites [4] Kurki A, Hannula M, Miettinen S, Teittinen H, Paakinaho K, Hyttinen J, et al. Ascorbic acid 2-phosphate-releasing poly-l-lactide-co-epsilon-caprolactone membranes enhance tissue regeneration: first in vivo insights for pelvic organ prolapse. Regen Biomater. 2025;12:rbaf097. PMC12640511 41287757 sourceExperimental — accuracy not yet measured
The Introduction describes PLCL as biodegradable, biocompatible and flexible, and lists several biomedical applications. The Results report different degradation rates and tensile properties for the tested PLCL formulations, but do not establish broadly tunable biodegradability or the claimed range of mechanical properties for PLCL generally. Page numbers are unavailable in our copy. (LLM, conf=0.84)
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“PLCL surface modification or covalent binding of bioactive molecules, such as cell adhesion factors and cell growth factors, can further improve their compatibility with specific cells [25–27].”
§ Application of PLCL as a biodegradable polymer in biomedical engineering > Physical and chemical properties of PLCL > Biocompatibility
What the sources say
- Not checked — no full text of the sourcecites [25] Jin J, Limburg S, Joshi SK, Landman R, Park M, Zhang Q, et al. Peripheral nerve repair in rats using composite hydrogel-filled aligned nanofiber conduits with incorporated nerve growth factor. Tissue Eng Part A. 2013;19:2138–2146. 23659607 PMC3761439 source
- Partly supportedcites [26] Táborská J, Blanquer A, Brynda E, Filová E, Stiborová L, Jenčová V, et al. PLCL/PCL dressings with platelet lysate and growth factors embedded in fibrin for chronic wound regeneration. Int J Nanomed. 2023;18:595–610. PMC9904224 36760757 sourceExperimental — accuracy not yet measured
The Introduction and Conclusion (pages not provided) describe PLCL/PCL nanofibers modified with a fibrin coating containing bioactive molecules. The Cell Viability results report improved growth of human endothelial cells with platelet lysate and added growth factors. The paper does not establish covalent binding of those molecules to PLCL/PCL, so that alternative in the claim is unsupported. (LLM, conf=0.86)
- Partly supportedcites [27] Wang Y, Wu T, Zhang J, Feng Z, Yin M, Mo X. A bilayer vascular scaffold with spatially controlled release of growth factors to enhance in situ rapid endothelialization and smooth muscle regeneration. Mater Des. 2021;204:109649. sourceExperimental — accuracy not yet measured
Section 3.3 reports improved proliferation of endothelial progenitor cells and smooth muscle cells on PLCL/collagen scaffolds incorporating VEGF and PDGF, respectively. Section 2.1 describes loading these factors into electrospun fibers, not covalently binding them or modifying the PLCL surface. The cellular benefit is supported, but the specified modification methods are not. (LLM, conf=0.86)
plainstates a possible cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
The cited sources that could be checked couldn’t confirm or dispute this claim.
In the paper
“At the same time, the long-term existence of PLCL in vivo did not produce toxic accumulation in other organs [33].”
§ Application of PLCL as a biodegradable polymer in biomedical engineering > Physical and chemical properties of PLCL > Biocompatibility
What the sources say
- Could not verifycites [33] Kim A, Downer MA, Berry CE, Valencia C, Fazilat AZ, Griffin M. Investigating immunomodulatory biomaterials for preventing the foreign body response. Bioengineering. 2023;10:1411. 38136002 PMC10741225 sourceExperimental — accuracy not yet measured
The Foreign Body Response section discusses reactions to other implanted materials, but does not address PLCL or accumulation in other organs. Searches for PLCL and for long-term toxic accumulation found no passage in our copy that supports the claim; page numbers were not available. (LLM, conf=0.76)
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Could not verify
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“In addition to its inherent properties, PLCL’s adaptability through surface modification, blending with bioactive molecules, and processing through advanced manufacturing techniques such as electrospinning, 3D printing, and supercritical carbon dioxide (scCO₂) foaming has extended its use to multiple fields [11–13].”
§ Application of PLCL as a biodegradable polymer in biomedical engineering > Introduction
What the sources say
- Not checked — no full text of the sourcecites [11] Keun Kwon I, Kidoaki S, Matsuda T. Electrospun nano- to microfiber fabrics made of biodegradable copolyesters: structural characteristics, mechanical properties and cell adhesion potential. Biomaterials. 2005;26:3929–3939. 15626440 source
- Not checked — no full text of the sourcecites [12] Bachtiar EO, Ritter VC, Gall K. Structure-property relationships in 3D-printed poly (L-lactide-co-ε-caprolactone) degradable polymer. J Mech Behav Biomed Mater. 2021;121:104650. 34166872 source
- Partly supportedcites [13] Pitkänen S, Paakinaho K, Pihlman H, Ahola N, Hannula M, Asikainen S, et al. Characterisation and in vitro and in vivo evaluation of supercritical-co₂-foamed b-tcp/PLCL composites for bone applications. Eur Cells Mater. 2019;38:35–50. 31381126 sourceExperimental — accuracy not yet measured
The Introduction and Composite manufacturing and characterisation sections describe blending PLCL with bioactive β-TCP and processing the composite by supercritical CO₂ foaming. The Discussion describes a compression treatment that changes the composite surface. The paper does not establish PLCL blending with bioactive molecules, PLCL processing by 3D printing, or extension of its use to multiple fields; its study concerns bone applications. Page numbers are unavailable in our copy. (LLM, conf=0.88)
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“Advances in polymer science have allowed precise control of the monomer and molecular weight ratios during PLCL synthesis, enabling customization of its degradation rate, mechanical strength, and cellular interactions to meet specific biomedical needs [9, 10].”
§ Application of PLCL as a biodegradable polymer in biomedical engineering > Introduction
What the sources say
- Partly supportedcites [9] Rajewska J, Kowalski J, Matys J, Dobrzyński M, Wiglusz RJ. The use of lactide polymers in bone tissue regeneration in dentistry–a systematic review. J Funct Biomater. 2023;14:83. 36826882 PMC9961440 sourceExperimental — accuracy not yet measured
The Introduction (page unavailable) says the ratio of glycolide to lactic units affects PLGA degradation and that PLA stereoisomers differ in mechanical properties. The Results and Discussion mention PLCL-containing materials and cell adhesion, but the cited review does not establish that controlling monomer and molecular-weight ratios during PLCL synthesis customizes all three claimed properties. (LLM, conf=0.82)
- Partly supportedcites [10] Wu S, Dong T, Li Y, Sun M, Qi Y, Liu J, et al. State-of-the-art review of advanced electrospun nanofiber yarn-based textiles for biomedical applications. Appl Mater Today. 2022;27:101473. 35434263 PMC8994858 sourceExperimental — accuracy not yet measured
The Surgical sutures section (page unavailable) lists PLCL among absorbable sutures described as having controllable degradation rates and mechanical properties. The Bone section (page unavailable) reports a cellular response to a PLCL-nanoyarn hydrogel. Neither passage links these properties or cellular interactions to precise control of monomer or molecular-weight ratios during PLCL synthesis. (LLM, conf=0.82)
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Partly supported
53 more claims · 24 with their cited sources checked
Create a free account to see all 185 claims and every source verdict.
- It may state two separate claims as one. 121
- Probably not a substantial claim. 20
Citations
Cites
Electrospinning and Electrospun Nanofibers: Methods, Materials, and Applications
Xue, J., Wu, T., Dai, Y., & Xia, Y. (2019) · Chemical Reviews · doi:10.1021/acs.chemrev.8b00593 · Cited by 5,015
Poly Lactic-co-Glycolic Acid (PLGA) as Biodegradable Controlled Drug Delivery Carrier
Makadia, H. K., & Siegel, S. J. (2011) · Polymers · doi:10.3390/polym3031377 · Cited by 4,816
Farah, S., Anderson, D. G., & Langer, R. (2016) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2016.06.012 · Cited by 3,443
Recent advances in 3D printing of biomaterials
Chia, H. N., & Wu, B. M. (2015) · Journal of Biological Engineering · doi:10.1186/s13036-015-0001-4 · Cited by 1,734
Photo-curing 3D printing technique and its challenges
Quan, H., Zhang, T., Xu, H., Luo, S., Nie, J., & Zhu, X. (2020) · Bioactive Materials · doi:10.1016/j.bioactmat.2019.12.003 · Cited by 1,106
Recent insights into the cellular biology of atherosclerosis
Tabas, I., García-Cardeña, G., & Owens, G. K. (2015) · Journal of Cell Biology · doi:10.1083/jcb.201412052 · Cited by 1,016 · cited 1×
“Adding growth factors such as VEGF and PDGF to PLCL vascular scaffolds can effectively promote vascular endothelialization, accelerate migration and aggregation of endothelial cells and smooth muscle cells, and promote vascular regeneration and reconstruction [161].”
Advanced Therapeutic Dressings for Effective Wound Healing—A Review
Boateng, J., & Catanzano, O. (2015) · Journal of Pharmaceutical Sciences · doi:10.1002/jps.24610 · Cited by 946
3D printing of functional biomaterials for tissue engineering
Zhu, W., Ma, X., Gou, M., Mei, D., Zhang, K., & Chen, S. (2016) · Current Opinion in Biotechnology · doi:10.1016/j.copbio.2016.03.014 · Cited by 822 · cited 1×
“This excellent property makes 3D printing technology suitable for the design of customized materials and materials with hierarchical structures, such as customized bone, cartilage, and joint prostheses, multilayer skin wound dressings, and vascular stent coatings [91].”
Wound Healing: From Passive to Smart Dressings
Farahani, M., & Shafiee, A. (2021) · Advanced Healthcare Materials · doi:10.1002/adhm.202100477 · Cited by 794 · cited 1×
“External conditions such as temperature, humidity, oxygen supply, infection and other factors can affect the wound healing process [136].”
Solution blow spinning: A new method to produce micro‐ and nanofibers from polymer solutions
Medeiros, E. S., Glenn, G. M., Klamczynski, A. P., Orts, W. J., & Mattoso, L. H. C. (2009) · Journal of Applied Polymer Science · doi:10.1002/app.30275 · Cited by 780
A Review of CO2 Applications in the Processing of Polymers
Tomasko, D. L., Li, H., Liu, D., Han, X., Wingert, M. J., Lee, L. J., & Koelling, K. W. (2003) · Industrial & Engineering Chemistry Research · doi:10.1021/ie030199z · Cited by 686 · cited 1×
“The fabrication process mainly involves three steps: gas adsorption, depressurization-induced foaming, and curing [112 – 114].”
Nanoparticles meet electrospinning: recent advances and future prospects
Zhang, C.-L., & Yu, S.-H. (2014) · Chemical Society Reviews · doi:10.1039/c3cs60426h · Cited by 665
Balla, E., Daniilidis, V., Karlioti, G., Kalamas, T., Stefanidou, M., Bikiaris, N. D., Vlachopoulos, A., Koumentakou, I., & Bikiaris, D. N. (2021) · Polymers · doi:10.3390/polym13111822 · Cited by 655
Neural tissue engineering options for peripheral nerve regeneration
Gu, X., Ding, F., & Williams, D. F. (2014) · Biomaterials · doi:10.1016/j.biomaterials.2014.04.064 · Cited by 630 · cited 2×
“They should also possess suf fi cient mechanical strength to protect the damaged nerve tissue from secondary compression and invasion by surrounding tissues [179].”
Abrigo, M., McArthur, S. L., & Kingshott, P. (2014) · Macromolecular Bioscience · doi:10.1002/mabi.201300561 · Cited by 622
Stereolithographic (SLA) 3D printing of oral modified-release dosage forms
Wang, J., Goyanes, A., Gaisford, S., & Basit, A. W. (2016) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2016.03.016 · Cited by 612
PLGA: a Unique Polymer for Drug Delivery
Kapoor, D. N., Bhatia, A., Kaur, R., Sharma, R., Kaur, G., & Dhawan, S. (2015) · Therapeutic Delivery · doi:10.4155/tde.14.91 · Cited by 609
Keun Kwon, I., Kidoaki, S., & Matsuda, T. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2004.10.007 · Cited by 607
Kafle, A., Luis, E., Silwal, R., Pan, H. M., Shrestha, P. L., & Bastola, A. K. (2021) · Polymers · doi:10.3390/polym13183101 · Cited by 587
Innovative Treatment Strategies to Accelerate Wound Healing: Trajectory and Recent Advancements
Kolimi, P., Narala, S., Nyavanandi, D., Youssef, A. A. A., & Dudhipala, N. (2022) · Cells · doi:10.3390/cells11152439 · Cited by 585 · cited 1×
“For example, in diabetic patients, wound healing is signi fi cantly delayed due to the inhibition of angiogenesis and dysregulation of in fl ammation in the hyperglycemic environment [137].”
Selective laser sintering (SLS) 3D printing of medicines
Fina, F., Goyanes, A., Gaisford, S., & Basit, A. W. (2017) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2017.06.082 · Cited by 577 · cited 1×
“…of complex three-dimensional structures via computer-aided design, allows precise control over scaffold porosity, pore size, and microstructure, and facilitates accurate modulation of mechanical strength, and creates microstructures with graded porosity within a single scaffold [88 – 90].”
Electrospun nanofiber reinforced composites: a review
Jiang, S., Chen, Y., Duan, G., Mei, C., Greiner, A., & Agarwal, S. (2018) · Polymer Chemistry · doi:10.1039/c8py00378e · Cited by 560 · cited 2×
“This is because during electrospinning, fi ber orientation is enhanced and a more ordered structure is formed [63].”
Vijayavenkataraman, S. (2020) · Acta Biomaterialia · doi:10.1016/j.actbio.2020.02.003 · Cited by 556 · cited 1×
“The directional microstructure was further designed to promote the directional growth of nerve fi bers [180].”
Poly(lactic acid) blends in biomedical applications
Saini, P., Arora, M., & Kumar, M. N. V. R. (2016) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2016.06.014 · Cited by 549
Eshraghi, S., & Das, S. (2010) · Acta Biomaterialia · doi:10.1016/j.actbio.2010.02.002 · Cited by 524
Chouhan, D., Dey, N., Bhardwaj, N., & Mandal, B. B. (2019) · Biomaterials · doi:10.1016/j.biomaterials.2019.119267 · Cited by 522 · cited 1×
“After skin injury, the body itself goes through three stages of in fl ammation, proliferation and remodelling to achieve skin wound healing and repair, but this process is affected by the external environment and internal factors of the body [135].”
Vascular endothelium – Gatekeeper of vessel health
Cahill, P. A., & Redmond, E. M. (2016) · Atherosclerosis · doi:10.1016/j.atherosclerosis.2016.03.007 · Cited by 518 · cited 1×
“Endothelial cells can reconstruct the intima structure of vessels and regulate vascular regeneration by secreting growth factors (VEGF) and active factor (NO) [159].”
Biomedical Applications of Biodegradable Polyesters
Manavitehrani, I., Fathi, A., Badr, H., Daly, S., Negahi Shirazi, A., & Dehghani, F. (2016) · Polymers · doi:10.3390/polym8010020 · Cited by 514
Fused deposition modelling: Current status, methodology, applications and future prospects
Cano-Vicent, A., Tambuwala, M. M., Hassan, S. S., Barh, D., Aljabali, A. A. A., Birkett, M., Arjunan, A., & Serrano-Aroca, Á. (2021) · Additive Manufacturing · doi:10.1016/j.addma.2021.102378 · Cited by 509
Poly (lactic acid)-based biomaterials for orthopaedic regenerative engineering
Narayanan, G., Vernekar, V. N., Kuyinu, E. L., & Laurencin, C. T. (2016) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2016.04.015 · Cited by 484 · cited 1×
“Furthermore, by incorporating components like BG and chondroitin sulfate, composite PLCL scaffolds with gradient hardness can be designed to better mimic the layered structure of native cartilage [192].”
A Special Material or a New State of Matter: A Review and Reconsideration of the Aerogel
Du, A., Zhou, B., Zhang, Z., & Shen, J. (2013) · Materials · doi:10.3390/ma6030941 · Cited by 481 · cited 1×
“The high speci fi c surface area enables ef fi cient loading of therapeutic agents for the treatment of damaged tissues and organs [129, 130].”
Liu, Z., Wang, Y., Wu, B., Cui, C., Guo, Y., & Yan, C. (2019) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-019-03332-x · Cited by 469 · cited 1×
“…m e n t a l s t a b ilit y W ound r e p a i r [ 126 ] , bon e d e f ec t [ 273 ] , a n ti - a dh e s i on e ff ec t a f t e r ca r d i ac s u r g e r y [ 274 ] scaffolds with relatively low resolution, making it unsui-table for fabricating scaffolds with intricate structural requirements [96, 97].”
Okutan, N., Terzi, P., & Altay, F. (2014) · Food Hydrocolloids · doi:10.1016/j.foodhyd.2013.12.022 · Cited by 441
Amani, H., Arzaghi, H., Bayandori, M., Dezfuli, A. S., Pazoki‐Toroudi, H., Shafiee, A., & Moradi, L. (2019) · Advanced Materials Interfaces · doi:10.1002/admi.201900572 · Cited by 436
Ziegler, C., Wolf, A., Liu, W., Herrmann, A., Gaponik, N., & Eychmüller, A. (2017) · Angewandte Chemie International Edition · doi:10.1002/anie.201611552 · Cited by 419
The immune microenvironment in cartilage injury and repair
Li, M., Yin, H., Yan, Z., Li, H., Wu, J., Wang, Y., Wei, F., Tian, G., Ning, C., Li, H., et al. (2022) · Acta Biomaterialia · doi:10.1016/j.actbio.2021.12.006 · Cited by 403 · cited 1×
“…o f o s t e o c hond r a l i n t e rf ace [ 196 ] S u l f a t e a l g i n a t e 3 D p r i n ti ng T G F E nh a n ce c hond r og e n i c d i ff e r e n ti a ti on a nd c hond r og e n e s i s o f M S C s ; P r o m o t e s c o ll a g e n d e po s iti on [ 344 ] from the outside to the inside [190].”
Biological responses to physicochemical properties of biomaterial surface
Rahmati, M., Silva, E. A., Reseland, J. E., A. Heyward, C., & Haugen, H. J. (2020) · Chemical Society Reviews · doi:10.1039/d0cs00103a · Cited by 391 · cited 1×
“This requires not only good biocompatibility of the material itself, but also that the material will not produce harmful degradation products during the degradation process [22].”
Electrospinning: An enabling nanotechnology platform for drug delivery and regenerative medicine
Chen, S., Li, R., Li, X., & Xie, J. (2018) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2018.05.001 · Cited by 383
Peripheral Nerve Injury Treatments and Advances: One Health Perspective
Lopes, B., Sousa, P., Alvites, R., Branquinho, M., Sousa, A. C., Mendonça, C., Atayde, L. M., Luís, A. L., Varejão, A. S. P., & Maurício, A. C. (2022) · International Journal of Molecular Sciences · doi:10.3390/ijms23020918 · Cited by 381 · cited 1×
“In addition, the scaffold should also provide a suitable local microenvironment for nerve growth, such as promoting axon growth by carrying neurotrophic factors such as NGF and loading substances such as MgO to enhance anti-in fl ammatory ability and reduce local in fl am-matory response [181, 182].”
Chronic wounds: Current status, available strategies and emerging therapeutic solutions
Las Heras, K., Igartua, M., Santos-Vizcaino, E., & Hernandez, R. M. (2020) · Journal of Controlled Release · doi:10.1016/j.jconrel.2020.09.039 · Cited by 370
Askari, M., Afzali Naniz, M., Kouhi, M., Saberi, A., Zolfagharian, A., & Bodaghi, M. (2021) · Biomaterials Science · doi:10.1039/d0bm00973c · Cited by 369 · cited 1×
“…with natural polysaccharides such as hyaluronic acid and chitosan can improve the hydrophilicity and cartilage regeneration ability of scaffolds [194]; Inorganic materials such as hydro-xyapatite(HA) can be added to PLCL to design a scaffold with higher hardness and mechanical strength, which…”
Metabolism of vascular smooth muscle cells in vascular diseases
Shi, J., Yang, Y., Cheng, A., Xu, G., & He, F. (2020) · American Journal of Physiology-Heart and Circulatory Physiology · doi:10.1152/ajpheart.00220.2020 · Cited by 366 · cited 1×
“However, it should be noted that the excessive proliferation of endothelial cells and smooth muscle cells will cause intimal hyperplasia, lumen narrowing, and local poor blood fl ow, which will lead to the formation of thrombosis and calci fi ed plaque [162].”
Electrospun polymeric nanofibres as wound dressings: A review
Miguel, S. P., Figueira, D. R., Simões, D., Ribeiro, M. P., Coutinho, P., Ferreira, P., & Correia, I. J. (2018) · Colloids and Surfaces B: Biointerfaces · doi:10.1016/j.colsurfb.2018.05.011 · Cited by 362
Azad, M. A., Olawuni, D., Kimbell, G., Badruddoza, A. Z. M., Hossain, M. S., & Sultana, T. (2020) · Pharmaceutics · doi:10.3390/pharmaceutics12020124 · Cited by 356 · cited 1×
“…of complex three-dimensional structures via computer-aided design, allows precise control over scaffold porosity, pore size, and microstructure, and facilitates accurate modulation of mechanical strength, and creates microstructures with graded porosity within a single scaffold [88 – 90].”
Unraveling of Advances in 3D-Printed Polymer-Based Bone Scaffolds
Xu, Y., Zhang, F., Zhai, W., Cheng, S., Li, J., & Wang, Y. (2022) · Polymers · doi:10.3390/polym14030566 · Cited by 349 · cited 1×
“The PLCL prepared by 3D printing can be controlled by adjusting the printing parameters, such as packing density and interlayer bonding, to impart higher elastic modulus and fatigue strength to the material, which is more suitable for long-term implantation scenarios [64].”
Electrospun polymer micro/nanofibers as pharmaceutical repositories for healthcare
Feng, X., Li, J., Zhang, X., Liu, T., Ding, J., & Chen, X. (2019) · Journal of Controlled Release · doi:10.1016/j.jconrel.2019.03.020 · Cited by 322
The Synergy of Scaffold-Based and Scaffold-Free Tissue Engineering Strategies
Ovsianikov, A., Khademhosseini, A., & Mironov, V. (2018) · Trends in Biotechnology · doi:10.1016/j.tibtech.2018.01.005 · Cited by 314 · cited 1×
“…and porosity can be obtained by various preparation methods, such as electrospinning, 3D printing, supercritical carbon dioxide foaming, gel extrusion and freeze-drying, so as to better simulate the extracellular matrix structure of different positions and different types of cartilage tissue [193].”
Printed aerogels: chemistry, processing, and applications
Feng, J., Su, B.-L., Xia, H., Zhao, S., Gao, C., Wang, L., Ogbeide, O., Feng, J., & Hasan, T. (2021) · Chemical Society Reviews · doi:10.1039/c9cs00757a · Cited by 313 · cited 1×
“The high speci fi c surface area enables ef fi cient loading of therapeutic agents for the treatment of damaged tissues and organs [129, 130].”
Prabhakaran, M. P., Venugopal, J. R., & Ramakrishna, S. (2009) · Biomaterials · doi:10.1016/j.biomaterials.2009.05.057 · Cited by 311
Electrospun Medicated Nanofibers for Wound Healing: Review
Liu, X., Xu, H., Zhang, M., & Yu, D.-G. (2021) · Membranes · doi:10.3390/membranes11100770 · Cited by 311
Challenges With the Development of Biomaterials for Sustainable Tissue Engineering
Williams, D. F. (2019) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2019.00127 · Cited by 306 · cited 1×
“Biocompatibility refers to the ability of materials to coexist harmoniously with cells and tissues in the body when they interact with biological tissues or body fl uids without inducing rejection, in fl ammation, allergic reactions or toxicity [21].”
Modern Trends for Peripheral Nerve Repair and Regeneration: Beyond the Hollow Nerve Guidance Conduit
Carvalho, C. R., Oliveira, J. M., & Reis, R. L. (2019) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2019.00337 · Cited by 297 · cited 2×
“Consequently, the PNS exhibits greater reparative capacity and a more favorable prognosis, which also provides a promising application scenario for tissue engineering materials [178].”
Scaffold degradation in bone tissue engineering: An overview
Tajvar, S., Hadjizadeh, A., & Samandari, S. S. (2023) · International Biodeterioration & Biodegradation · doi:10.1016/j.ibiod.2023.105599 · Cited by 291 · cited 1×
“PLCL has good biocompatibility, and its degradation time is relatively close to the bone tissue regeneration process, which will not affect the growth of new bone due to the non-degradation of the material [203 – 205].”
Ghosal, K., Agatemor, C., Špitálsky, Z., Thomas, S., & Kny, E. (2019) · Chemical Engineering Journal · doi:10.1016/j.cej.2018.10.117 · Cited by 278
Davis, M. J., Earley, S., Li, Y.-S., & Chien, S. (2023) · Physiological Reviews · doi:10.1152/physrev.00053.2021 · Cited by 273 · cited 1×
“Smooth muscle cells give elasticity and contractility to vascular grafts in the media layer of vascular grafts, while secreting extracellular matrix to stabilize vascular structure [160].”
Electrospun gelatin/PCL and collagen/PLCL scaffolds for vascular tissue engineering
Fu, W., Liu, Z., Feng, B., Hu, R., He, X., Wang, H., Yin, M., Huang, H., Zhang, H., & Wang, W. (2014) · International Journal of Nanomedicine · doi:10.2147/ijn.s61375 · Cited by 272
Zhang, K., Fu, Q., Yoo, J., Chen, X., Chandra, P., Mo, X., Song, L., Atala, A., & Zhao, W. (2017) · Acta Biomaterialia · doi:10.1016/j.actbio.2016.12.008 · Cited by 268
Progress in Hydrogels for Skin Wound Repair
Qi, L., Zhang, C., Wang, B., Yin, J., & Yan, S. (2022) · Macromolecular Bioscience · doi:10.1002/mabi.202100475 · Cited by 267 · cited 1×
“For example, the hydrophilic properties of PLCL materials can be signi fi cantly improved by adding collagen, fi broin and chitosan to PLCL. Incorporating electrospun PLCL fi bers into hydrogels can signi fi cantly enhance the overall mechanical strength of the composite material [143, 144].”
Substrates for cardiovascular tissue engineering
Bouten, C. V. C., Dankers, P. Y. W., Driessen-Mol, A., Pedron, S., Brizard, A. M. A., & Baaijens, F. P. T. (2011) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2011.01.007 · Cited by 261
Preparation of γ-PGA/chitosan composite tissue engineering matrices
Hsieh, C.-Y., Tsai, S.-P., Wang, D.-M., Chang, Y.-N., & Hsieh, H.-J. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2005.02.012 · Cited by 255
Potential Applications of Nanomaterials and Technology for Diabetic Wound Healing
Bai, Q., Han, K., Dong, K., Zheng, C., Zhang, Y., Long, Q., & Lu, T. (2020) · International Journal of Nanomedicine · doi:10.2147/ijn.s276001 · Cited by 250 · cited 1×
“At the same time, an ideal dressing has appropriate permeability and moisture retention capacity, providing a humid environment for the wound, while allowing gas exchange to prevent the accumulation of local exudate [139].”
Wu, S., Dong, T., Li, Y., Sun, M., Qi, Y., Liu, J., Kuss, M. A., Chen, S., & Duan, B. (2022) · Applied Materials Today · doi:10.1016/j.apmt.2022.101473 · Cited by 250
Recent Advancements on Three-Dimensional Electrospun Nanofiber Scaffolds for Tissue Engineering
Chen, Y., Dong, X., Shafiq, M., Myles, G., Radacsi, N., & Mo, X. (2022) · Advanced Fiber Materials · doi:10.1007/s42765-022-00170-7 · Cited by 248
Oliveira, J. E., Mattoso, L. H. C., Orts, W. J., & Medeiros, E. S. (2013) · Advances in Materials Science and Engineering · doi:10.1155/2013/409572 · Cited by 242 · cited 1×
“…that fi bers fabricated via the SBS method exhibit minimal solvent residues, the fi ber scaffolds had diameters ranging from the nanoscale to the microscale, and PLCL materials could be fabricated into various scaffolds via the SBS method for applications in diverse biomedical fi elds [84 – 87].”
Chou, S.-F., & Woodrow, K. A. (2017) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2016.09.004 · Cited by 233
Biomaterials for the Treatment of Myocardial Infarction
Rane, A. A., & Christman, K. L. (2011) · Journal of the American College of Cardiology · doi:10.1016/j.jacc.2011.11.001 · Cited by 226 · cited 1×
“Furthermore, the patch should have long-term mechanical stability and provide suf fi cient mechanical strength and integrity for an extended period after implantation, until the formation of new tissue [163].”
Fernández, J., Etxeberria, A., & Sarasua, J.-R. (2012) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2012.01.003 · Cited by 217
Liu, S., Deng, Z., Chen, K., Jian, S., Zhou, F., Yang, Y., Fu, Z., Xie, H., Xiong, J., & Zhu, W. (2022) · Molecular Medicine Reports · doi:10.3892/mmr.2022.12615 · Cited by 205
Various FDM Mechanisms Used in the Fabrication of Continuous-Fiber Reinforced Composites: A Review
Karimi, A., Rahmatabadi, D., & Baghani, M. (2024) · Polymers · doi:10.3390/polym16060831 · Cited by 201
Lee, J., Tae, G., Kim, Y. H., Park, I. S., Kim, S.-H., & Kim, S. H. (2008) · Biomaterials · doi:10.1016/j.biomaterials.2007.12.029 · Cited by 200
Electroactive electrospun nanofibers for tissue engineering
Zhang, X., Li, L., Ouyang, J., Zhang, L., Xue, J., Zhang, H., & Tao, W. (2021) · Nano Today · doi:10.1016/j.nantod.2021.101196 · Cited by 197
Jeong, S. I., Kim, B.-S., Lee, Y. M., Ihn, K. J., Kim, S. H., & Kim, Y. H. (2004) · Biomacromolecules · doi:10.1021/bm049921i · Cited by 182 · cited 2×
“The rigid molecular skeleton of L-lactide makes the material more susceptible to hydrolysis reactions, and higher L-lactide content usually accelerates the degradation process [39].”
Singh, L., Kumar, V., & Ratner, B. D. (2004) · Biomaterials · doi:10.1016/j.biomaterials.2003.09.040 · Cited by 179
Design, printing, and engineering of regenerative biomaterials for personalized bone healthcare
Jia, Z., Xu, X., Zhu, D., & Zheng, Y. (2023) · Progress in Materials Science · doi:10.1016/j.pmatsci.2023.101072 · Cited by 176 · cited 1×
“…bone repair scaffold should also have biological activity, which can induce the migration and aggregation of mesenchymal stem cells to the injured area and proliferation and differentiation, promote cell ossi fi cation and calcium salt deposition, and accelerate the formation of new bone [202].”
The aligned core–sheath nanofibers with electrical conductivity for neural tissue engineering
Zhang, J., Qiu, K., Sun, B., Fang, J., Zhang, K., EI‐Hamshary, H., Al‐Deyab, S. S., & Mo, X. (2014) · Journal of Materials Chemistry B · doi:10.1039/c4tb01185f · Cited by 159 · cited 1×
“…AN i; N F E l ec t r o s p i nn i ng NG F P r o m o t e P C 12 d i r ec ti on a l g r o w t h , i n c r ea s e t h e nu m b e r o f n e u r it e s [ 333 ] the PI3K/AKT-Nrf2 signaling pathway, thereby promoting the polarization of macrophages towards M2 anti-in fl ammatory phenotype, and promoting…”
Extrusion assisted by supercritical CO2: A review on its application to biopolymers
Chauvet, M., Sauceau, M., & Fages, J. (2017) · The Journal of Supercritical Fluids · doi:10.1016/j.supflu.2016.05.043 · Cited by 158
Travieso-Rodriguez, J. A., Jerez‐Mesa, R., Llumà, J., et al. (2019) · Materials · doi:10.3390/ma12233859 · Cited by 147
Articular cartilage repair biomaterials: strategies and applications
Wang, M., Wu, Y., Li, G., Lin, Q., Zhang, W., Liu, H., & Su, J. (2024) · Materials Today Bio · doi:10.1016/j.mtbio.2024.100948 · Cited by 145 · cited 1×
“In addition, the scaffold should have a structure and porosity similar to bone trabeculae, and have a surface topography suitable for cell adhesion and growth, promoting cell growth on the surface and inside the scaffold [201].”
Self-citation3D printing of bio-instructive materials: Toward directing the cell
Zieliński, P. S., Gudeti, P. K. R., Rikmanspoel, T., & Włodarczyk‐Biegun, M. K. (2022) · Bioactive Materials · doi:10.1016/j.bioactmat.2022.04.008 · Cited by 145
Hydrolytic Degradation of Polylactic Acid Fibers as a Function of pH and Exposure Time
Vaid, R., Yildirim, E., Pasquinelli, M. A., & King, M. W. (2021) · Molecules · doi:10.3390/molecules26247554 · Cited by 143
Li, H., Li, B., Lv, D., Li, W., Lu, Y., & Luo, G. (2023) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2023.114778 · Cited by 142 · cited 1×
“However, PLCL itself is relatively simple and can only provide a mechanical barrier for the wound healing process, so it is necessary to further improve the overall performance of the wound dressing by loading other materials or biological factors [141, 142].”
Recent Progress of the Preparation and Application of Electrospun Porous Nanofibers
Wang, P., Lv, H., Cao, X., Liu, Y., & Yu, D.-G. (2023) · Polymers · doi:10.3390/polym15040921 · Cited by 140
Fendi, F., Abdullah, B., Suryani, S., Usman, A. N., & Tahir, D. (2024) · Bone · doi:10.1016/j.bone.2024.117075 · Cited by 130 · cited 1×
“…cient support for bone tissue on both sides of the defect, and to give certain mechanical stimulation to bone tissue at the broken end, to promote bone formation and bone repair, and to have a suitable degradation time to match the speed of bone regeneration and repair and new bone formation [200].”
Xu, P., Kankala, R. K., Wang, S., & Chen, A. (2024) · Regenerative Biomaterials · doi:10.1093/rb/rbad107 · Cited by 129
Current Status and Prospects of Polymer Powder 3D Printing Technologies
Wang, Y., Xu, Z., Wu, D., & Bai, J. (2020) · Materials · doi:10.3390/ma13102406 · Cited by 124 · cited 1×
“This method is suitable for the fabrication of scaffolds with complex geometric shapes, and is especially suitable for the construction of bone tissue scaffolds because of its high mechanical strength and porosity [105, 106].”
Advancements in tissue engineering for articular cartilage regeneration
Chen, M., Jiang, Z., Zou, X., You, X., Cai, Z., & Huang, J. (2024) · Heliyon · doi:10.1016/j.heliyon.2024.e25400 · Cited by 122 · cited 1×
“Chondrocytes, the sole cell type in mature cartilage, secrete ECM components such as collagen, proteoglycans, and glycosaminoglycans, which maintain the tissue ’ s structure and function [189].”
Jin, G., Kim, M., Shin, U. S., & Kim, H.-W. (2011) · Neuroscience Letters · doi:10.1016/j.neulet.2011.06.023 · Cited by 120
Sun, B., Wu, T., Wang, J., Li, D., Wang, J., Gao, Q., Bhutto, M. A., El-Hamshary, H., Al-Deyab, S. S., & Mo, X. (2016) · Journal of Materials Chemistry B · doi:10.1039/c6tb01710j · Cited by 116
Wu, T. S., Zhang, J., Wang, Y., Li, D., Sun, B., El‐Hamshary, H., Yin, M., & Mo, X. (2017) · Materials Science and Engineering C · doi:10.1016/j.msec.2017.08.072 · Cited by 116
Mechanical properties and cytotoxicity of PLA/PCL films
Jeong, H., Rho, J., Shin, J., Lee, D. Y., Hwang, T., & Kim, K. J. (2018) · Biomedical Engineering Letters · doi:10.1007/s13534-018-0065-4 · Cited by 115
Composite biomaterial scaffolds for cardiac tissue engineering
Shapira, A., Feiner, R., & Dvir, T. (2016) · International Materials Reviews · doi:10.1179/1743280415y.0000000012 · Cited by 114 · cited 1×
“On this basis, the patch should also have certain biological functions, which can simulate the microstructure and biological function of natural heart tissue, and provide a suitable extracellular matrix environment [164].”
Processing of Materials for Regenerative Medicine Using Supercritical Fluid Technology
García-González, C. A., Concheiro, A., & Alvarez-Lorenzo, C. (2015) · Bioconjugate Chemistry · doi:10.1021/bc5005922 · Cited by 112
Kuang, H., Wang, Y., Shi, Y., Yao, W., He, X., Liu, X., Mo, X., Lu, S., & Zhang, P. (2020) · Biomaterials · doi:10.1016/j.biomaterials.2020.120288 · Cited by 112
Garkhal, K., Verma, S., Jonnalagadda, S., & Kumar, N. (2007) · Journal of Polymer Science Part A: Polymer Chemistry · doi:10.1002/pola.22031 · Cited by 110 · cited 2×
“PLCL with a higher molecular weight contains longer polymer chain segment structures, so more hydrolysis steps are needed to break the polymer backbone during degradation, and the degradation time is correspondingly longer [37].”
Karamikamkar, S., Yalcintas, E. P., Haghniaz, R., de Barros, N. R., Mecwan, M., Nasiri, R., Davoodi, E., Nasrollahi, F., Erdem, A., Kang, H., et al. (2023) · Advanced Science · doi:10.1002/advs.202204681 · Cited by 109 · cited 1×
“The interconnected pores and high porosity of aerogel scaffolds provide an ideal environment for cell adhesion and proliferation, and this structure facilitates the exchange of nutrients [127, 128].”
Uhljar, L. É., & Ambrus, R. (2023) · Pharmaceutics · doi:10.3390/pharmaceutics15020417 · Cited by 108 · cited 1×
“The high speci fi c surface area of electrospinning is conducive to cell attachment and growth, and the porous structure is conducive to the in fi ltration and exchange of nutrients [75 – 77].”
Stereolithography 3D printing technology in pharmaceuticals: a review
Deshmane, S., Kendre, P., Mahajan, H., & Jain, S. (2021) · Drug Development and Industrial Pharmacy · doi:10.1080/03639045.2021.1994990 · Cited by 103 · cited 1×
“This technique achieves high resolution and is suitable for fabricating intricate structures [100, 101].”
Ma, Y., Wang, H., Wang, Q., Cao, X., & Gao, H. (2023) · Chemical Engineering Journal · doi:10.1016/j.cej.2022.139424 · Cited by 103 · cited 2×
“9) [186, 187].”
Wang, J., Wang, H., Mo, X., & Wang, H. (2020) · Advanced Materials · doi:10.1002/adma.202004555 · Cited by 102
Sun, B., Zhou, Z., Li, D., Wu, T., Zheng, H., Liu, J., Wang, G., Yu, Y., & Mo, X. (2019) · Materials Science and Engineering: C · doi:10.1016/j.msec.2018.09.021 · Cited by 100
Zhang, D., Yao, Y., Duan, Y., Yu, X., Shi, H., Nakkala, J. R., Zuo, X., Hong, L., Mao, Z., & Gao, C. (2020) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b20321 · Cited by 96 · cited 1×
“R e gu l a t e s ph e no t y p i c t r a n s f o r m a ti on o f m ac r oph a g e s , p r o m o t e s n e r v e r e g e n e r a ti on [ 332 ] S c i a ti c n e r v e d e f ec t s r e p a i r SF ; P E DO T E l ec t r o s p i nn i ng ; F r eeze - d r y i ng –”
Supercritical fluid applications in polymer nanocomposites
Tomasko, D. L., Han, X., Liu, D., et al. (2003) · Current Opinion in Solid State and Materials Science · doi:10.1016/j.cossms.2003.10.005 · Cited by 94
Three-dimensional porous gas-foamed electrospun nanofiber scaffold for cartilage regeneration
Chen, Y., Xu, W. D., Shafiq, M., Tang, J., Hao, J., Xie, X., Yuan, Z., Xiao, X., Liu, Y., & Mo, X. (2021) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2021.06.067 · Cited by 94
Li, A., Li, L., Zhao, B., Li, X., Liang, W., Lang, M., Cheng, B., & Li, J. (2021) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2021.11.146 · Cited by 93
Kijeńska‐Gawrońska, E., Prabhakaran, M. P., Święszkowski, W., Kurzydłowski, K. J., & Ramakrishna, S. (2013) · European Polymer Journal · doi:10.1016/j.eurpolymj.2013.10.021 · Cited by 92
Wen, Y.-T., Dai, N.-T., & Hsu, S.-H. (2019) · Acta Biomaterialia · doi:10.1016/j.actbio.2019.02.044 · Cited by 91
Li, Y., Yin, D., Liu, W., Zhou, H., Zhang, Y., & Wang, X. (2020) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2020.07.094 · Cited by 91
Tara, S., Kurobe, H., Rocco, K. A., Maxfield, M. W., Best, C. A., Yi, T., Naito, Y., Breuer, C. K., & Shinoka, T. (2014) · Atherosclerosis · doi:10.1016/j.atherosclerosis.2014.09.030 · Cited by 90
Sun, B., Zhou, Z., Wu, T., Chen, W., Li, D., Zheng, H., El-Hamshary, H., Al-Deyab, S. S., Mo, X., & Yu, Y. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b06707 · Cited by 90
Yang, Z., Wu, Y., Li, C., Zhang, T., Zou, Y., Hui, J. H. P., Ge, Z., & Lee, E. H. (2012) · Tissue Engineering Part A · doi:10.1089/ten.tea.2011.0315 · Cited by 88
A compliant and biomimetic three-layered vascular graft for small blood vessels
Zhang, Y., Li, X. S., Guex, A. G., Liu, S. S., Müller, E., Malini, R. I., Zhao, H., Rottmar, M., Maniura‐Weber, K., Rossi, R. M., et al. (2017) · Biofabrication · doi:10.1088/1758-5090/aa6bae · Cited by 88
Yoo, J., Park, J. H., Kwon, Y. W., Chung, J. J., Choi, I. C., Nam, J. J., Lee, H. S., Jeon, E. Y., Lee, K., Kim, S. H., et al. (2020) · Biomaterials Science · doi:10.1039/d0bm00847h · Cited by 86 · cited 2×
“By introducing collagen, gelatin and fi broin into PLCL, the cell adhesion ability of PLCL nerve conduit can be signi fi cantly improved, and the migration adhesion and growth of nerve cells can be promoted [183, 184].”
VEGF-loaded microsphere patch for local protein delivery to the ischemic heart
Rodness, J., Mihic, A., Miyagi, Y., Wu, J., Weisel, R. D., & Li, R.-K. (2016) · Acta Biomaterialia · doi:10.1016/j.actbio.2016.09.009 · Cited by 84 · cited 1×
“At the same time, it can be used as a carrier to slowly release growth factors such as VEGF and bFGF to promote angiogenesis and tissue regeneration [165].”
PLGA Barrier Materials from CO2. The influence of Lactide Co-monomer on Glycolic Acid Polyesters
Murcia Valderrama, M. A., van Putten, R.-J., & Gruter, G.-J. M. (2020) · ACS Applied Polymer Materials · doi:10.1021/acsapm.0c00315 · Cited by 82
Lu, S., Chen, W., Wang, J., Guo, Z., Xiao, L., Wei, L., Yu, J., Yuan, Y., Chen, W., Bian, M., et al. (2023) · Small Methods · doi:10.1002/smtd.202200883 · Cited by 82
Lee, H. S., Jeon, E. Y., Nam, J. J., Park, J. H., Choi, I. C., Kim, S. H., Chung, J. J., Lee, K., Park, J. W., & Jung, Y. (2022) · Acta Biomaterialia · doi:10.1016/j.actbio.2022.01.042 · Cited by 81 · cited 1×
“…r e s , a nd r a p i d p r e p a r a ti on V a s c u l a r g r a f t [ 155 ] , ca r til a g e r e p a i r , n e v e r r e g e n e r a ti on [ 183 , 270 , 271 ] , bon e d e f ec t [ 271 ] , u r e t h r a l ti ss u e e ng i n ee r i ng [ 211 ] s c C O ₂ G r ee n a nd e nv i r on m e n t a ll y fr i…”
Hosseini, H., Zirakjou, A., Goodarzi, V., Mousavi, S. M., Khonakdar, H. A., & Zamanlui, S. (2020) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2020.02.095 · Cited by 79 · cited 1×
“In different bio-medical application fi elds, different materials and bioactive factors can be selected as the raw materials, and appropriate aerogel scaffold preparation methods can be chosen to meet the needs of tissue engineering repair [131 – 134].”
Khan, A. U. R., Huang, K., Jinzhong, Z., Zhu, T., Morsi, Y., Aldalbahi, A., El-Newehy, M., Yan, X., & Mo, X. (2020) · Colloids and Surfaces B: Biointerfaces · doi:10.1016/j.colsurfb.2020.111352 · Cited by 79
Jung, Y., Chung, Y.-I., Kim, S. H., Tae, G., Kim, Y. H., Rhie, J. W., Kim, S.-H., & Kim, S. H. (2009) · Biomaterials · doi:10.1016/j.biomaterials.2009.05.034 · Cited by 77
Fabrication of novel poly(lactic acid/caprolactone) bilayer membrane for GBR application
Abe, G. L., Sasaki, J.-I., Katata, C., Kohno, T., Tsuboi, R., Kitagawa, H., & Imazato, S. (2020) · Dental Materials · doi:10.1016/j.dental.2020.03.013 · Cited by 77 · cited 1×
“However, this preparation method also has its shortcomings: the organic solvent introduced in the preparation process needs to be fully cleaned and removed; otherwise, residual surface organic solvents may compromise material biosafety [123].”
Akkouch, A., Zhang, Z., & Rouabhia, M. (2014) · Journal of Biomaterials Applications · doi:10.1177/0885328213486705 · Cited by 76
Li, C., Wang, L., Yang, Z., Kim, G., Chen, H., & Ge, Z. (2012) · Journal of Biomaterials Science Polymer Edition · doi:10.1163/092050610x551970 · Cited by 75
Tariq, U., Gupta, M., Pathak, S., Patil, R., Dohare, A., & Misra, S. K. (2022) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.2c00454 · Cited by 75 · cited 1×
“The mechanical properties of PLCL can meet the requirements of the heart patch, and the biological properties of the patch can be further improved by loading growth factors or cells onto the PLCL surface [166].”
Oliveira, J. E., Medeiros, E. S., Cardozo, L., Voll, F., Madureira, E. H., Mattoso, L. H. C., & Assis, O. B. G. (2013) · Materials Science and Engineering: C · doi:10.1016/j.msec.2012.10.032 · Cited by 70 · cited 1×
“Thus, SBS demonstrates more competitive advantages in the mass production of PLCL-based drug-loaded fi brous membranes [224].”
Li, H., Williams, G. R., Wu, J., Wang, H., Sun, X., & Zhu, L. (2017) · Materials Science and Engineering C · doi:10.1016/j.msec.2017.04.058 · Cited by 69
Wang, W., Nie, W., Zhou, X., Feng, W., Chen, L., Zhang, Q., You, Z., Shi, Q., Peng, C., & He, C. (2018) · Acta Biomaterialia · doi:10.1016/j.actbio.2018.08.014 · Cited by 69
Load‐bearing biodegradable PCL‐PGA‐beta TCP scaffolds for bone tissue regeneration
Kumar, A., Mir, M., Aldulijan, I., Mahajan, A., Anwar, A., Leon, C. H., Terracciano, A., Zhao, X., Su, T., Kalyon, D. M., et al. (2021) · Journal of Biomedical Materials Research Part B: Applied Biomaterials · doi:10.1002/jbm.b.34691 · Cited by 69
Jin, J., Limburg, S., Joshi, S. K., Landman, R., Park, M., Zhang, Q., Kim, H. T., & Kuo, A. C. (2013) · Tissue Engineering Part A · doi:10.1089/ten.tea.2012.0575 · Cited by 68
Hinderer, S., Brauchle, E., & Schenke‐Layland, K. (2015) · Advanced Healthcare Materials · doi:10.1002/adhm.201400762 · Cited by 68 · cited 2×
“Vascular grafts need to withstand the impact of blood fl ow and the extrusion and traction from surrounding tissues in the physiological state, so they need to have certain mechanical properties such as tensile properties and elongation at break, and adequate anti-fracture strength [149].”
Kim, M.-H., Hong, B.-H., Lee, J., Kim, S. E., Kang, S. S., Kim, Y. H., & Tae, G. (2012) · Biomacromolecules · doi:10.1021/bm3005353 · Cited by 68 · cited 1×
“…[ 341 ] G e l a ti n E l ec t r o s p i nn i ng H e p a r i n H i gh e r c hond r og e n i c g e n e e xp r e ss i o n a nd GAG s p r odu c ti on [ 342 ] P L GA G e l - p r e ss i ng m e t hod T G F - β 1 ; P l u r on i c F - 127 ; h A S C s I ndu ce h A S C s c hond r og e n i c d i ff e r e n…”
Fernández, J., Etxeberria, A., Ugartemendia, J. M., Petisco-Ferrero, S., & Sarasua, J.-R. (2012) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2012.03.008 · Cited by 67
Damiri, F., Fatimi, A., Liu, Y., Musuc, A. M., Fajardo, A. R., Gowda, B. H. J., Vora, L. K., Shavandi, A., & Okoro, O. V. (2025) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2024.122845 · Cited by 67 · cited 1×
“Three-dimensional cell culture and the construction of multicellular tumor spheres (MCTS) can simulate the extracellular matrix micro-environment in vivo and provide more screening conditions for anticancer drugs [217].”
Yi, B., Yu, L., Tang, H. Q., Wang, W., Liu, W., & Zhang, Y. (2021) · Applied Materials Today · doi:10.1016/j.apmt.2021.101198 · Cited by 66
Zhou, W., Rahman, M. S. U., Sun, C., Li, S., Zhang, N., Chen, H., Han, C. C., Xu, S., & Liu, Y. (2024) · Advanced Materials · doi:10.1002/adma.202307805 · Cited by 65
Bhang, S. H., Jeong, S. I., Lee, T., Jun, I., Lee, Y. B., Kim, B., & Shin, H. (2011) · Macromolecular Bioscience · doi:10.1002/mabi.201100333 · Cited by 64
Kim, S. H., Kim, S. H., & Jung, Y. (2015) · Journal of Controlled Release · doi:10.1016/j.jconrel.2015.03.026 · Cited by 64
A 3D-Printed PLCL Scaffold Coated with Collagen Type I and Its Biocompatibility
He, Y., Liu, W., Guan, L., Chen, J., Duan, L., Jia, Z., Huang, J., Li, W., Liu, J., Xiong, J., et al. (2018) · BioMed Research International · doi:10.1155/2018/5147156 · Cited by 63 · cited 3×
“After printing, the scaffold is freeze-dried to remove dioxane [95, 108].”
InfluentialLi, H., Zhao, C., Wang, Z., Zhang, H., Yuan, X., & Kong, D. (2010) · Journal of Biomaterials Science, Polymer Edition · doi:10.1163/156856209x445302 · Cited by 62 · cited 1×
“The adhesion growth of vascular smooth muscle cells cultured on the surface of the fi bers was promoted [221].”
Yin, L., Wang, K., Lv, X., Sun, R., Yang, S., Yang, Y., Liu, Y., Liu, J., Zhou, J., & Yu, Z. (2017) · Scientific Reports · doi:10.1038/s41598-017-07759-8 · Cited by 61 · cited 1×
“…e r v e r e g e n e r a ti on [ 265 ] , v a s c u l a r g r a f t [ 266 ] , ca r til a g e r e p a i r [ 17 , 267 , 268 ] , bon e d e f ec t [ 207 , 269 ] , 3 D p r i n ti ng P e r s on a li ze d c u s t o m i za ti on , c on t r o ll a b l e m ac r o - a nd m i c r o - s t r u c t u r e s , h i…”
Wang, J., An, Q., Li, D., Wu, T. S., Chen, W., Sun, B., EI‐Hamshary, H., Al‐Deyab, S. S., Zhu, W. P., & Mo, X. (2015) · Journal of Biomedical Nanotechnology · doi:10.1166/jbn.2015.2138 · Cited by 60
Kim, T. H., Jung, Y., & Kim, S. H. (2018) · Tissue Engineering Part A · doi:10.1089/ten.tea.2017.0318 · Cited by 59
Synthesis of Poly(l-lactide-co-ε-caprolactone) Copolymer: Structure, Toughness, and Elasticity
Zhang, M., Chang, Z., Wang, X., & Li, Q. (2021) · Polymers · doi:10.3390/polym13081270 · Cited by 59 · cited 1×
“These properties are not only related to its molecular weight, monomer ratio, and processing techniques, but also affected by external environmental factors such as temperature and humidity [38, 50, 51].”
Chen, F., Han, J. G., Guo, Z., Mu, C., Yu, C., Ji, Z., Sun, L., Wang, Y., & Wang, J. (2023) · Materials · doi:10.3390/ma16113895 · Cited by 59
Namhongsa, M., Daranarong, D., Sriyai, M., Molloy, R., Ross, S., Ross, G. M., Tuantranont, A., Tocharus, J., Sivasinprasasn, S., Topham, P. D., et al. (2022) · Biomacromolecules · doi:10.1021/acs.biomac.2c00626 · Cited by 57
Peng, K., Mubarak, S., Diao, X., Cai, Z., Zhang, C., Wang, J., & Wu, L. (2022) · Polymers · doi:10.3390/polym14204320 · Cited by 56 · cited 1×
“The fabrication process mainly involves three steps: gas adsorption, depressurization-induced foaming, and curing [112 – 114].”
Wang, Q., Wei, Y., Yin, X., Zhan, G., Cao, X., & Gao, H. (2024) · Advanced Functional Materials · doi:10.1002/adfm.202400217 · Cited by 56 · cited 2×
“9) [186, 187].”
Fabrication of a new tubular fibrous PLCL scaffold for vascular tissue engineering
Kim, S.-H., Kwon, J. H., Chung, M. S., Chung, E., Jung, Y., Kim, S. H., & Kim, Y. H. (2006) · Journal of Biomaterials Science, Polymer Edition · doi:10.1163/156856206778937244 · Cited by 55
Biomaterial types, properties, medical applications, and other factors: a recent review
Agrawal, R., Kumar, A., Mohammed, M. K. A., & Singh, S. (2023) · Journal of Zhejiang University-SCIENCE A · doi:10.1631/jzus.a2200403 · Cited by 55 · cited 1×
“7 Triple-layer structure of PLCL vascular graft [154] signi fi cant challenge for PLCL alone [168, 169].”
Follmann, H. D. M., Oliveira, O. N., Lazarin-Bidóia, D., Nakamura, C. V., Huang, X., Asefa, T., & Silva, R. (2018) · Nanoscale · doi:10.1039/c7nr08464a · Cited by 54 · cited 1×
“In different bio-medical application fi elds, different materials and bioactive factors can be selected as the raw materials, and appropriate aerogel scaffold preparation methods can be chosen to meet the needs of tissue engineering repair [131 – 134].”
Sugiura, T., Hibino, N., Breuer, C. K., & Shinoka, T. (2016) · Journal of Cardiothoracic Surgery · doi:10.1186/s13019-016-0559-z · Cited by 53 · cited 1×
“The results showed that the PGA-PLCL patch loaded with cardiomyocytes could promote the healing of the myocardium defect area and express more α -actin [167].”
Stereolithography 3D Printing of Microcapsule Catalyst-Based Self-Healing Composites
Shinde, V. V., Celestine, A. N., Beckingham, L. E., & Beckingham, B. S. (2020) · ACS Applied Polymer Materials · doi:10.1021/acsapm.0c00872 · Cited by 53 · cited 1×
“SLA method is to construct a three-dimensional structure by layer-by-layer curing of photosensitive liquid resins using laser or ultraviolet light [98, 99].”
Chang, P., Li, S., Sun, Q., Guo, K., Wang, H., Li, S., Zhang, L., Xie, Y., Zheng, X., & Liu, Y. (2022) · Journal of Tissue Engineering · doi:10.1177/20417314211063022 · Cited by 53
Novel PLCL nanofibrous/keratin hydrogel bilayer wound dressing for skin wound repair
Zhang, M., Xu, S., Chen, D., Wang, R., Han, C., Che, Y., Feng, W. S., Wang, C., Gao, S., & Zhao, W. (2022) · Colloids and Surfaces B Biointerfaces · doi:10.1016/j.colsurfb.2022.113119 · Cited by 52
Jung, Y., Kim, S. H., You, H. J., Kim, S.-H., Ha Kim, Y., & Min, B. G. (2008) · Journal of Biomaterials Science, Polymer Edition · doi:10.1163/156856208784909336 · Cited by 51 · cited 1×
“G ood m ec h a n i ca l a nd e l a s ti c p r op e r t i e s p r o m o t e t h e g r o w t h o f ca r til a g e ce ll s on t h e s u rf ace o f t h e s ca ff o l d [ 337 ] F G ; HA G e l - p r e ss i ng m e t hod –”
Chen, Y., Xu, W. D., Shafiq, M., Song, D., Xie, X., Yuan, Z., El-Newehy, M. H., El‐Hamshary, H., Morsi, Y., Liu, Y., et al. (2022) · Biomaterials Advances · doi:10.1016/j.msec.2022.112643 · Cited by 51 · cited 1×
“…W ound r e p a i r [ 264 ] , n e r v e r e g e n e r a ti on [ 265 ] , v a s c u l a r g r a f t [ 266 ] , ca r til a g e r e p a i r [ 17 , 267 , 268 ] , bon e d e f ec t [ 207 , 269 ] , 3 D p r i n ti ng P e r s on a li ze d c u s t o m i za ti on , c on t r o ll a b l e m ac r o - a nd m i c…”
Wang, W., Wang, L., Zhang, B., Shang, S., Zhao, C., Zhang, W., Chen, J., Zhou, C., Zhou, H., & Feng, S. (2024) · Chemical Engineering Journal · doi:10.1016/j.cej.2024.149444 · Cited by 51 · cited 1×
“…of hyalene cartilage [196] that mesenchymal stem cells in the body can be recruited to the injured area under the action of local in fl ammatory factors and differentiate into osteoblasts, which further secrete cartilage matrix and gradually ossify and eventually become new bone tissue [198].”
Jin, D., Hu, J., Xia, D., Liu, A., Kuang, H., Du, J., Mo, X., & Yin, M. (2019) · International Journal of Nanomedicine · doi:10.2147/ijn.s205569 · Cited by 50 · cited 1×
“In order to solve this problem, most studies choose to add heparin to PLCL vascular stents to enhance the anticoagulant performance of the stents [156 – 158].”
Gu, J., Liu, N., Yang, X., Feng, Z., & Qi, F. (2014) · Biomedical Materials · doi:10.1088/1748-6041/9/3/035012 · Cited by 49
Laurent, C. P., Vaquette, C., Liu, X., Schmitt, J.-F., & Rahouadj, R. (2018) · Journal of Biomaterials Applications · doi:10.1177/0885328218757064 · Cited by 49
Romeo, A. A., Easley, J. T., Regan, D. P., Hackett, E. S., Johnson, J. W., Johnson, J. K., Puttlitz, C. M., & McGilvray, K. C. (2021) · Journal of Shoulder and Elbow Surgery · doi:10.1016/j.jse.2021.07.018 · Cited by 49
Future Perspectives in Nerve Repair and Regeneration
Tos, P., Ronchi, G., Geuna, S., & Battiston, B. (2013) · International Review of Neurobiology · doi:10.1016/b978-0-12-420045-6.00008-0 · Cited by 48 · cited 1×
“Due to the existence of environmental inhibitory factors in the central nervous system, the ability of nerve axon regeneration is limited, and often cannot get a good therapeutic effect [176, 177].”
Ng, P., Pinho, A. R., Gomes, M. C., Demidov, Y., Krakor, E., Grumme, D., Herb, M., Lê, K., Mano, J. F., Mathur, S., et al. (2022) · Macromolecular Bioscience · doi:10.1002/mabi.202100442 · Cited by 48
Xie, J., Han, Z., Naito, M., Maeyama, A., Kim, S. H., Kim, Y. H., & Matsuda, T. (2010) · Journal of Biomedical Materials Research Part B: Applied Biomaterials · doi:10.1002/jbm.b.31627 · Cited by 47 · cited 2×
“S a lt i m p r e gn a ti on a nd l eac h i ng m e t hod B M S C s G ood m ec h a n i ca l s uppo r t s t r e ng t h , p r o m o t e t h e a dh e s i on g r o w t h o f ca r til a g e ce ll s a nd c o ll a g e n s yn t h e s i s [ 228 ] C o ll a g e n 3 D p r i n ti ng –”
Manna, S., Donnell, A. M., Kaval, N., Al-Rjoub, M. F., Augsburger, J. J., & Banerjee, R. K. (2018) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2018.05.066 · Cited by 46
Xu, X., Wang, X., Qin, C., Khan, A. U. R., Zhang, W., & Mo, X. (2021) · Colloids and Surfaces B: Biointerfaces · doi:10.1016/j.colsurfb.2021.111557 · Cited by 46
Taskin, M. B., Xu, R., Zhao, H., Wang, X., Dong, M., Besenbacher, F., & Chen, M. (2015) · Physical Chemistry Chemical Physics · doi:10.1039/c5cp00413f · Cited by 45 · cited 1×
“E l ec t r o s p i nn i ng no r e p i n e ph r i n e P r o m o t e d i r ec ti on a l g r o w t h o f n e r v e fi b e r s a nd p r o m o t e n e u r it e e x t e n s i on [ 329 ] N e r v e ti ss u e e ng i n e e r i ng P L GA E l ec t r o s p i nn i ng ; 3 D p r i n ti ng –”
Yin, A., Luo, R., Li, J., Mo, X., Wang, Y., & Zhang, X. (2017) · Colloids and Surfaces B: Biointerfaces · doi:10.1016/j.colsurfb.2017.01.045 · Cited by 45 · cited 1×
“In order to solve this problem, most studies choose to add heparin to PLCL vascular stents to enhance the anticoagulant performance of the stents [156 – 158].”
Suhaeri, M., Subbiah, R., Kim, S.-H., Kim, C.-H., Oh, S. J., Kim, S.-H., & Park, K. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b14020 · Cited by 44
Liu, F., Liao, X., Liu, C., Li, M., Chen, Y., Shao, W., Weng, K., Li, F., Ou, K., & He, J. (2020) · Journal of Materials Science · doi:10.1007/s10853-020-04510-z · Cited by 44
Multifunctional Electrospun Nanofibers for Biosensing and Biomedical Engineering Applications
Chen, Z., Guan, M., Bian, Y., & Yin, X. (2023) · Biosensors · doi:10.3390/bios14010013 · Cited by 44
He, X., Fu, W., Feng, B., Wang, H., Liu, Z., Yin, M., Wang, W., & Zheng, J. (2013) · Regenerative Medicine · doi:10.2217/rme.13.29 · Cited by 43
Solvent Retention in Electrospun Fibers Affects Scaffold Mechanical Properties
D’Amato, A. R., Bramson, M. T. K., Corr, D. T., Puhl, D. L., Gilbert, R. J., & Johnson, J. (2018) · Electrospinning · doi:10.1515/esp-2018-0002 · Cited by 43
3D printing of implantable elastic PLCL copolymer scaffolds
Liu, W., Feng, Z., Ou-Yang, W., Pan, X., Wang, X., Huang, P., Zhang, C., Kong, D., & Wang, W. (2020) · Soft Matter · doi:10.1039/c9sm02396h · Cited by 43
Cardiac tissue engineering, biomaterial scaffolds, and their fabrication techniques
Roshandel, M., & Dorkoosh, F. (2021) · Polymers for Advanced Technologies · doi:10.1002/pat.5273 · Cited by 43 · cited 1×
“Finally, the vascular scaffold should have a proper degradation time, so that it can be synchronized with the formation of new tissue [152].”
Aerogel-Based Materials in Bone and Cartilage Tissue Engineering—A Review with Future Implications
Lázár, I., Čelko, L., & Menelaou, M. (2023) · Gels · doi:10.3390/gels9090746 · Cited by 43 · cited 1×
“The bio-mimetic structure of aerogel scaffolds mimics ECM architecture, providing a favorable environment for cell growth [124, 125].”
Jin, D., Yang, S., Wu, S., Yin, M., & Kuang, H. (2021) · Bioactive Materials · doi:10.1016/j.bioactmat.2021.08.013 · Cited by 43
Experimental approaches to study vascularization in tissue engineering and biomaterial applications
Kirkpatrick, C. J., Unger, R. E., Krump‐Konvalinkova, V., Peters, K., Schmidt, H., & Kamp, G. (2003) · Journal of Materials Science Materials in Medicine · doi:10.1023/a:1024903514335 · Cited by 42 · cited 1×
“At the same time, the inner layer of the scaffold should have good biological activity, which can promote the migration, aggregation, adhesion and growth of vascular endothelial cells, and accelerate the process of vascular endothelialization [151].”
Tissue‐engineered blood vessels with endothelial nitric oxide synthase activity
Lim, S. H., Cho, S., Park, J., Jeon, O., Lim, J. M., Kim, S. S., & Kim, B. (2007) · Journal of Biomedical Materials Research Part B Applied Biomaterials · doi:10.1002/jbm.b.30977 · Cited by 42
Li, J., Xue, C. H., Wang, H., Dong, S., Yang, Z., Cao, Y., Zhao, B., Cheng, B., Xie, X., Mo, X., et al. (2022) · Small · doi:10.1002/smll.202201147 · Cited by 42
Biomaterials-Driven Sterile Inflammation
Chen, H., Agrawal, D. K., & Thankam, F. G. (2022) · Tissue Engineering Part B: Reviews · doi:10.1089/ten.teb.2020.0253 · Cited by 41
Zhan, A., Chen, L., Sun, W., Tang, Y., Chen, J., Yu, D., & Zhang, W. (2022) · Materials & Design · doi:10.1016/j.matdes.2022.110660 · Cited by 41
Fernández, J., Etxeberría, A., & Sarasua, J. R. (2013) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2013.04.003 · Cited by 40 · cited 1×
“In contrast, since caprolactone has a longer aliphatic chain and is not easily hydrolyzed by hydrolytic enzymes, a higher ε -caprolactone content would slow down the degradation process, thus allowing the biomaterial to remain stable in the body for a longer time [40, 41].”
Oliveira, J. E., Zucolotto, V., Mattoso, L. H. C., & Medeiros, E. S. (2012) · Journal of Nanoscience and Nanotechnology · doi:10.1166/jnn.2012.5730 · Cited by 40
Ghazali, H. S., Askari, E., Seyfoori, A., & Naghib, S. M. (2023) · Scientific Reports · doi:10.1038/s41598-023-35865-3 · Cited by 40 · cited 1×
“Photoinitiators need to be added to SLA printing inks, and residual photoinitiators may induce cytotoxicity, a key limitation of SLA printing [103].”
Dimensional Accuracy in 3D Printed Medical Models: A Follow-Up Study on SLA and SLS Technology
Msallem, B., Vavrina, J. J., Beyer, M., Halbeisen, F. S., Lauer, G., Dragu, A., & Thieringer, F. M. (2024) · Journal of Clinical Medicine · doi:10.3390/jcm13195848 · Cited by 40 · cited 1×
“This technique achieves high resolution and is suitable for fabricating intricate structures [100, 101].”
Wang, W., Liu, D., Li, D., Du, H., Zhang, J., You, Z., Li, M., & He, C. (2019) · Colloids and Surfaces B Biointerfaces · doi:10.1016/j.colsurfb.2019.06.065 · Cited by 39
Zheng, T., Guo, L., Du, Z., Leng, H., Cai, Q., & Yang, X. (2021) · Ceramics International · doi:10.1016/j.ceramint.2021.03.234 · Cited by 39
Chausse, V., Iglesias, C., Bou-Petit, E., Ginebra, M.-P., & Pegueroles, M. (2023) · Polymer Testing · doi:10.1016/j.polymertesting.2022.107817 · Cited by 39
Multifunctional aerogel: A unique and advanced biomaterial for tissue regeneration and repair
Liu, H., Xing, F., Yu, P., Zhe, M., Shakya, S., Liu, M., Xiang, Z., Duan, X., & Ritz, U. (2024) · Materials & Design · doi:10.1016/j.matdes.2024.113091 · Cited by 39
Self-citationLee, S. H., Jeon, S., Qu, X., Kang, M. S., Lee, J. H., Han, D.-W., & Hong, S. W. (2022) · Nano Convergence · doi:10.1186/s40580-022-00329-3 · Cited by 39 · cited 2×
“11 Schematic diagram of ternary MXene-loaded PLCL/ collagen nano fi brous scaffolds that promote spontaneous osteogenic differentiation [209] in rats, and the experimental results showed that the compliance and contractility of the bladder of rats in the PLCL + ADSCs group were signi fi cantly…”
Kang, E. Y., Lih, E., Kim, I. H., Joung, Y. K., & Han, D. K. (2016) · Biomaterials Research · doi:10.1186/s40824-016-0054-6 · Cited by 38
Investigating Immunomodulatory Biomaterials for Preventing the Foreign Body Response
Kim, A., Downer, M. A., Berry, C. E., Valencia, C., Fazilat, A. Z., & Griffin, M. (2023) · Bioengineering · doi:10.3390/bioengineering10121411 · Cited by 38 · cited 1×
“At the same time, the long-term existence of PLCL in vivo did not produce toxic accumulation in other organs [33].”
Nifant'ev, I. E., Tavtorkin, A. N., Shlyakhtin, A. V., & Ivchenko, P. V. (2024) · European Polymer Journal · doi:10.1016/j.eurpolymj.2024.113250 · Cited by 38 · cited 1×
“1, the SEM images exhibit L-lactic acid [232] ε -caprolactone [233] L-lactic acid, glycolide [234] glycolide [235] the microtopography of a PLCL fi ber membrane prepared via electrospinning technology [74].”
Fu, Y., Zhu, L., Liu, B., Zhang, X., & Weng, Y. (2024) · Polymer · doi:10.1016/j.polymer.2024.127295 · Cited by 38
Cho, S., Jeon, O., Lim, J. E., Gwak, S., Kim, S. S., Choi, C. Y., Kim, D., & Kim, B. (2006) · Journal of Vascular Surgery · doi:10.1016/j.jvs.2006.07.032 · Cited by 37
Li, C., Zhang, J., Li, Y., Moran, S. K., Khang, G., & Ge, Z. (2013) · Biomedical Materials · doi:10.1088/1748-6041/8/2/025005 · Cited by 37
Haim Zada, M., Kumar, A., Elmalak, O., Mechrez, G., & Domb, A. J. (2019) · ACS Omega · doi:10.1021/acsomega.9b02889 · Cited by 37
Kim, S. H., Jung, Y., & Kim, S. H. (2013) · Tissue Engineering Part C: Methods · doi:10.1089/ten.tec.2012.0170 · Cited by 36
Walejewska, E., Idaszek, J., Heljak, M. K., Chlanda, A., Choińska, E., Hasırcı, V., & Święszkowski, W. (2019) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2019.109030 · Cited by 36
Transcatheter Heart Valves: A Biomaterials Perspective
Bui, H. T., Khair, N., Yeats, B., Gooden, S., James, S. P., & Dasi, L. P. (2021) · Advanced Healthcare Materials · doi:10.1002/adhm.202100115 · Cited by 36 · cited 1×
“To solve this problem, the researchers formed the new composite material by incorporating different proportions of other materials into the PLCL matrix to improve the mechanical strength of the material so that it can meet the needs of the heart valve [149, 171].”
Research works printed but not linked: 1
- Yu CP, Li X, Shen ZQ. Ring-opening homopolymerization of lactides. Prog Chem. 2007;19:136–144.
Cited by
Aranci, K., & Kızılkurtlu, A. A. (2026) · Polymers · doi:10.3390/polym18080974 · Cited by 2
Liu, Z., Zhao, C., Zhou, H., Shi, Z., Huang, R., Xu, L., Su, J., Chen, G., Zhao, Z., Li, Y., et al. (2026) · Stem Cell Research & Therapy · doi:10.1186/s13287-026-05072-8
“Furthermore, the considerable potential of PLCL-based scaffolds for wound treatment applications has been validated in multiple studies [22–24].”
Kongsak, C., Rithchumpon, P., Akkravijitkul, N., et al. (2026) · Journal of Molecular Structure · doi:10.1016/j.molstruc.2026.146741
An injectable PLCL/CaHA microsphere composite gel for enhanced skin regeneration
Wang, X., Chen, X., Gao, R., Sun, Y., Jiang, S., He, Y., & Wang, D. (2026) · Biomaterials Advances · doi:10.1016/j.bioadv.2026.215047
A “Vascular Band-Aid” strategy for proactive inhibition of post-anastomotic vascular complications
Xu, R., Yan, J., Li, X., Yin, X., Yang, Z., Zhou, Q., & Yi, B. (2026) · Regenerative Biomaterials · doi:10.1093/rb/rbag164
“PLCL, a Food and Drug Administration (FDA)- approved biodegradable elastomer with a well-established safety profile, has recently gained recognition for vascular applications owing to its excellent biocompatibility and capacity to support cell growth [13–15].”
Metadata
- Authors
- Zhao, Y., & Liu, H.
- Corresponding author
- Zhao, Yonggang
- Venue
- Journal of Materials Science Materials in Medicine
- Published
- 2026-02-27
- Volume
- 37
- Issue
- 1
- ISSN
- 0957-4530 (ISSN-L)
- 1573-4838
- PMC
- PMC12960328
- OpenAlex
- W7131777400
- Cited by
- 7
- References
- 325
- Citations by year
- 2026: 7
- FWCI
- 3.04
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- cc-by
- creativecommons.org/licenses/by/4.0 (tdm)
- creativecommons.org/licenses/by/4.0 (vor, 5 d)
- Locations
- Journal of Materials Science Materials in Medicine (publishedVersion, cc-by)
- PubMed Central (publishedVersion, cc-by)
- PubMed (publishedVersion)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Topics
- Physical Sciences › Materials Science › Biomaterials › biodegradable polymer synthesis and properties
- Physical Sciences › Engineering › Biomedical Engineering › Bone Tissue Engineering Materials
- Health Sciences › Medicine › Surgery › Surgical Sutures and Adhesives
- Keywords
- poly(L-lactide-co-ε-caprolactone), PLCL, biodegradable polymers, biocompatibility, physicochemical properties, wound healing, cardiovascular stents, nerve repair, osteochondral tissue engineering, drug delivery, polymer modification
- MeSH terms
- Animals, Biocompatible Materials, Biomedical Engineering, Humans, Materials Testing, Polyesters, Polymers, Wound Healing, Drug Delivery Systems, Absorbable Implants, Tissue Engineering
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
The claim verdicts this report counts are experimental: their accuracy is not yet measured.
A language model drew the claims from the paper on 2026-10-08, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).
A second model labelled each claim on 2026-10-08 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).
Cited sources are checked with a language model’s help (gpt-6-sol).
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.